1. Design in the chair Aerospace for Sustainable Engineering and Technology (ASSET)

    Melkert, JA., 2007, Delft Science in design Conference Proceedings. Eekhout, M. & Visser, R. (eds.). Delft: Delft University of Technology, p. 71-78 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  2. Design of a 100 MW Laddermill for wind energy generation from 5 km altitude

    Lansdorp, B. & Ockels, WJ., 2005, 7th World Congress on Recovery Recycling and Reintegration (digitaal). p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  3. Design of a Large Inflatable Kiteplane

    Breukels, J. & Ockels, WJ., 2007, CD Proceedings. Engelstad, S. P. (ed.). Waikiki, HW, USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  4. Design of a high-tension elastically deforming space tether deployer

    Lansdorp, B., Somers, HMJR., van der Heide, EJ. & Kruijff, M., 2004, Proceedings of the International Astronautical Congress 2004. Vancouver, Canada: ZARM, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  5. Design, Materials and Manufacturing of the Interiors of the Superbus

    Terzi, A. & Ockels, WJ., 2008, Proceedings of SAMPE Long Beach Conference. SAMPE (ed.). s.l.: SAMPE International, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  6. Design, comfort and safety of the interiors of the Superbus

    Terzi, A., Ozcelik, D. & Ockels, WJ., 2009, Proceedings of SAE World Congress 2009. SAE International (ed.). s.l.: SAE International, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  7. Determination of Inner and Outer Bounds of Reachable Sets Through Subpavings

    Rego, F., De Weerdt, E., van Oort, ER., van Kampen, EJ., Chu, QP. & Pascoal Dos Santos, AM., 2014, In : Mathematics in Computer Science. 8, 3-4, p. 425-442 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Development and testing of a steering mechanism for Laddermill Kites

    Lansdorp, B., Ruiterkamp, R. & Ockels, WJ., 2007, Proceedings of the Windpower Shanghai Conference 2007. s.n. (ed.). Shanghai, China: Windpower Shanghai, p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  9. Die Kraft des Drachens

    Schmehl, R., 2011, In : Erneuerbare Energien. 2011, 8, p. 64-69 6 p.

    Research output: Contribution to journalArticleProfessional

  10. Effect of cruise altitude and alternative aviation fuels on radiative forcing

    Snijders, TA. & Melkert, JA., 2011, conference proceedings. Stern, T. (ed.). American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. Efficiency of kite power systems in pumping operation

    Fechner, U., van der Vlugt, R., Schmehl, R. & Ockels, WJ., 2011, p. 167-167. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  12. Efficient Design and Manufacturing of the Seats of the Superbus

    Terzi, A., Ozcelik, D. & Ockels, WJ., 2008, Proceedings of SAMPE Europe conference. SAMPE (ed.). SAMPE International, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  13. Efficient design and manufacturing of the seats of Superbus

    Terzi, A., Ozcelik, D. & Ockels, WJ., 2008, Proceedings of SEICO 08, Sampe Europe International Conference. Erath, MA. (ed.). Paris, France: SAMPE Europe Conferences, p. 51-56 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  14. Electrodynamic tethers under forced-current variations part 1: Periodic solutions for tether librations

    Williams, PD., 2010, In : Journal of Spacecraft and Rockets: devoted to astronautical science and technology. 47, 2, p. 308-319 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Electrodynamic tethers under forced-current variations part 2: Flexible-tether estimation and control

    Williams, PD., 2010, In : Journal of Spacecraft and Rockets: devoted to astronautical science and technology. 47, 2, p. 320-333 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Emissions testing on Gas-to-Liquid Kerosene blends

    Snijders, TA. & Melkert, JA., 2011, Conference proceedings. R., C. (ed.). Delft: Delft University of Technology, p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  17. Evaluation of safety, performance and emissions of synthetic fuel blends in a Cessna Citation

    Snijders, TA. & Melkert, JA., 2011, Conference proceeedings. Dominique Collin (ed.). geen: l'Association Aeronautique et Astronautique de France, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  18. First Mission Results of the Yes2 Tethered SpaceMail Experiment

    Kruijff, M., van der Heide, EJ., Ockels, WJ. & Gill, EKA., 2008, Proceedings of AIAA/AAS Astrodynamics Specialist Conference. S.N. (ed.). Honolulu Hawai, USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-29 29 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  19. Flexibel Tethered Kite with Moveable Attachment Points Part I: Dynamics and Control

    Lansdorp, B. & Williams, PD., 2007, Proceedings of the AIAA Atmospheric Flight Mechanics Conference 2007. s.n. (ed.). Hilton Head Island, USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-24 24 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  20. Flexible Tethered Kite with Moveable Attachment Points Part II: State and Wind Estimation

    Lansdorp, B. & Williams, PD., 2007, Proceedings of the AIAA Atmospheric Flight Mechanics Conference 2007. s.n. (ed.). American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-24 24 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  21. Flight Control and Stability of a Multiple Kites Tethered Systems

    Podgaets, AR. & Ockels, WJ., 2006, Renewable Energy 2006 Proceedings. Japan: International Solar Energy Society, p. 1-4 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  22. Flight Control of the High Altitude Wind Power System

    Podgaets, AR. & Ockels, WJ., 2007, SATIS. Haraksingh, I. & Young, B. (eds.). Cape Canaveral, USA: Florida Solar Energy Center, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  23. Flight Dynamics and Stability of a Tethered Inflatable Kiteplane

    Terink, EJ., Breukels, J., Schmehl, R. & Ockels, WJ., 2011, In : Journal of Aircraft: devoted to aeronautical science and technology. 48, 2, p. 503-513 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Flight control and stability of a multiple kites tethered system

    Podgaets, AR. & Ockels, WJ., 2006, Proceedings of Renewable Energy Conference. s.n. (ed.). Renewable energy conference, p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  25. Guidance performance analysis in the presence of model uncertainties

    Weiss, M., Rol, M., Falkena, W. & Scherer, CW., 2007, Proceedings of the AIAA guidance, navigation and control conference and exhibit. Leitner,J (ed.). South Carolina, USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  26. Hyperventilation in a motion sickenss desensitization program

    Mert, A., Bles, W. & Nooij, SAE., 2007, In : Aviation, Space, and Environmental Medicine. 78, p. 505-509 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Impact of fuel composition on emissions and performance of GTL kerosene blends in a Cessna Citation II

    Snijders, TA., Melkert, JA., Bogers, PF., Bauldreay, J., Wahl, CRM. & Kapernaum, MG., 2011, conference proceedings. Shirley Bradicich (ed.). IASH - International Association for Stability, Handling and Use of Liquid Fuels, Inc., p. 1-24 24 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  28. Improving the efficiency of copper indium gallium (di-)selenide (cigs) solar cells through integration of a moth-eye textured resist with a refractive index similar to aluminum doped zinc oxide.

    Burghoorn, M., Kniknie, B., van Deelen, J., Xu, M., Vroon, Z., Ee, R. & van de Belt, R., 2014, In : AIP Advances. 4, 12, p. 1-7 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Innovative Grading for Design Exercises - A case study from Aerospace Engineering

    Smits, GN. & Melkert, JA., 2011, Diversity and Unity. Proceedings of IASDR2011. Roozenburg, NFM., Chen, LL. & Stappers, PJ. (eds.). Delft: Delft University of Technology, p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  30. Innovative wind energy from high altitude in Holland and Australia

    Lansdorp, B. & Williams, PD., 2006, Proceedings of the Global Windpower Conference 2006. Prof.. Ali Sayigh (ed.). Australian Wind Energy Association, p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  31. Interior Design and accessibility aspects of the Superbus

    Terzi, A., van Deelen, J. & Ockels, WJ., 2008, Proceedings of the Society of Automotive Engineers World Congress 2008. s.n. (ed.). Detroit: SAE International, p. 1-5 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  32. Is Susceptibility to Space Motion Sickeness related to otolith asymmetry?

    Nooij, SAE., Vanspauwen, R., Wuyts, FL. & Ockels, WJ., 2008, XXV Barany Society Meeting: Program & Abstracts. Anniko, M. (ed.). Kyoto: Barany Society, p. 249-249 1 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  33. Is time a creation of life in response to gravity?

    Ockels, WJ., 2007, Proceedings of the International Astronauticaol Congress. Suresh, B. N. (ed.). Hyderabad, India: Indian Space Research Organisation, p. 1-17 17 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  34. Kite Lab Report

    Breukels, J., 2006, onbekend: Botanische Tuin TU Delft. 176 p.

    Research output: Book/ReportReportProfessional

  35. Kite power technology

    Schmehl, R., 2011, In : Windnieuws. 2011, 4, p. 22-24 3 p.

    Research output: Contribution to journalArticleScientific

  36. Kiteplane design (progress report)

    Breukels, J., 2007, Delft: LR Ch. Aerospace for Sustainable Eng. and Technology.

    Research output: Book/ReportReportProfessional

  37. Kostenraming voor het Zuiderzeelijntrace voor de Superbus, Superbus#kostenraming#01

    Melkert, JA., 2006, Delft: Faculteit LR/ASSET. 33 p.

    Research output: Book/ReportReportProfessional

  38. Laddermill sail - a new concept in sailing

    Podgaerts, AR. & Ockels, WJ., 2008, International Conference on Engineering Technology -ICET2007. s.n (ed.). Kuala Lumpur: University of Kuala Lumpur, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  39. Long-Term Laddermill Modeling for Site Selection

    Ruiterkamp, R., Lansdorp, B., Houska, B., Williams, PD. & Ockels, WJ., 2008, Proceedings of the AIAA Modeling and Simulation Technologies Conference. S.N. (ed.). Honolulu, Hawaii: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-4 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  40. Longitudinal Stability of Kites on the Cable and in Free Flight

    Podgaets, AR. & Ockels, WJ., 2007, Mathematical Modelling in Natural Sciences. Zheganina, I. N. (ed.). Perm, Russia: Perm State Technicl University, p. 17-17 1 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  41. Longitudinal Stability of Kites on the Cable and in Free Flight

    Podgaets, AR., Breukels, J. & Ockels, WJ., 2007, Mathematical Modelling in Natural Sciences. Zheganina, I. N. (ed.). Perm State Technical University, p. 17-17 1 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  42. Manufacturing of the composite chasis of the Superbus and assembly strategy

    Terzi, A. & Ockels, WJ., 2009, Proceedings of SAE World Congress 2009. SAE International (ed.). s.l.: SAE International, p. 1-5 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  43. Material selection and joining methods for the purpose of a high-altitude inflatable kite

    Verheul, RF., Breukels, J. & Ockels, WJ., 2009, AIAA conference proceedings. s.n. (ed.). American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-13 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  44. Materials and Manufacturing Processes of the Superbus

    Terzi, A. & Ockels, WJ., 2008, Proceedings of SAMPE Long Beach. SAMPE (ed.). s.l: SAMPE International, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  45. Mechanical properties of plastics reinforced with carbon nanotubes

    Podgaets, AR., Ockels, WJ. & Yurii Sokolkin, V., 2006, CD Proceedings of ASME Conference on Multifunctional Nanocomposites. s.n. (ed.). USA: ASME, p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  46. Model comparison for angle droplet fragmentation under varying accelerations

    Bartz, F-O., Schmehl, R., Koch, R., Bauer, H-J. & Sojka, PE., 2011, Proceedings of the 24th ILASS Europe. Costa, M., Moita, A. S. & Oliveira-Panao, M. R. (eds.). Estoril, Portugal: ILASS Europe, p. 1-11 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  47. Modeling Kite Flight Dynamics Using a Multibody Reduction Approach

    de Groot, SGC., Breukels, J., Schmehl, R. & Ockels, WJ., 2011, In : Journal of Guidance, Control, and Dynamics: devoted to the technology of dynamics and control. 34, 6, p. 1671-1682 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Modeling of Optimal Power Generation Using Multiple Kites

    Williams, PD., Lansdorp, B. & Ockels, WJ., 2008, Proceedings of AIAA Modeling and Simulation Technologies Conference. S.N. (ed.). Honolulu, Hawaii: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-20 20 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  49. Modeling, Simulation and Testing of Surf Kites for Power Generation

    Lansdorp, B., Ruiterkamp, R., Williams, PD. & Ockels, WJ., 2008, Proceedings of AIAA Modeling and Simulation Technologies Conference. S.N. (ed.). Honolulu, Hawaii: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-20 20 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

ID: 24860