1. 2013
  2. Materials experience: Fundamentals of materials and design

    Karana, E. (ed.), Pedgley, O. (ed.) & Rognoli, V., 2013, Oxford: Butteerworth-Heinemann Elsevier. 352 p.

    Research output: Book/ReportBook editingScientific

  3. 2016
  4. Aging of epoxy moulding compound: Thermomechanical properties during high temperature storage

    Zhang, B., Johlitz, M., Lion, A., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2016, Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE): 2016 17th International Conference. Piscataway: IEEE Society, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Atmospheric plasma modification of polyimide sheet for joining to titanium with high temperature adhesive

    Akram, M., Jansen, KMB., Ernst, LJ. & Bhowmik, S., 2016, In : International Journal of Adhesion and Adhesives. 65, p. 63-69

    Research output: Contribution to journalArticleScientificpeer-review

  6. Colour shift and mechanism investigation on the PMMA diffuser used in LED-based luminaires

    Lu, G., van Driel, WD., Fan, X., Yazdan Mehr, M., Fan, J., Qian, C., Jansen, KMB. & Zhang, GQ., 2016, In : Optical Materials. 54, p. 282-287 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Composition dependent properties of graphene (oxide)-alginate biopolymer nanocomposites

    Vilcinskas, K., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Polymer Composites. 39 (2018), S1, p. E236-E249

    Research output: Contribution to journalArticleScientificpeer-review

  8. Computationally efficient analysis & design of optimally compact gear pairs and assessment of gear compliance

    Amani, A., 2016, 228 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  9. Effect of fiber-matrix adhesion on the creep behavior of CF/PPS composites: Temperature and physical aging characterization

    Motta Dias, MH., Jansen, KMB., Luinge, JW., Bersee, HEN. & Benedictus, R., 2016, In : Mechanics of Time Dependent Materials: an international journal devoted to the time-dependent behaviour of materials and structures. 10, 2, p. 245-262 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Emerging material experiences

    Karana, E., Pedgley, O., Rognoli, V. & Korsunsky, A., 2016, In : Materials & Design. 90, p. 1248-1250 3 p.

    Research output: Contribution to journalEditorialScientificpeer-review

  11. Functional Demonstrators to Support Understanding of Smart Materials

    Barati, B., Karana, E., Jansen, K. & Hekkert, P., 2016, TEI'16 Proceedings of the TEI'16: Tenth International Conference on Tangible, Embedded and Embodied Internaction. Broekhuijsen, M. (ed.). New York: Association for Computing Machinery (ACM), p. 386-391 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Materializing experiential visions into sensory properties: The use of the experience map

    Camere, S., Schifferstein, R. & Bordegoni, M., 2016, Proceedings of the Tenth International Conference on Design and Emotion - Celebration & Contemplation. Desmet, P. M. A., Fokkinga, S. F., Ludden, G. D. S., Cila, N. & Van Zuthem, H. (eds.). Amsterdam: The Design & Emotion Society, p. 201-210 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Mechanical characterization of a shape morphing smart composite with embedded shape memory alloys in a shape memory polymer matrix

    Lelieveld, C., Jansen, K. & Teuffel, P., 2016, In : Journal of Intelligent Material Systems and Structures. 27, 15, p. 2038-2048 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Numerical investigation and experimental validation of residual stresses building up in microelectronics packaging

    Rezaie Adli, A. & Jansen, K., 2016, In : Microelectronics Reliability. 60, p. 26-38 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Perception of naturalness in textiles

    Overvliet, KE., Karana, E. & Soto-Faraco, S., 2016, In : Materials & Design. 90, p. 1192-1199 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. The Tuning of Materials: A Designer's Journey

    Karana, E., Giaccardi, E., Stamhuis, N. & Goossensen, J., 2016, DIS '16 Proceedings of the 2016 ACM Conference on Designing Interactive Systems. Foth, M. (ed.). New York: Association for Computing Machinery (ACM), p. 619-631 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Thermo-viscoelastic analysis of GLARE

    Abouhamzeh, M., Sinke, J., Jansen, K. M. B. & Benedictus, R., 2016, In : Composites Part B: Engineering. 99, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Traces as an Approach to Design for Focal Things and Practices

    Robbins, H., Giaccardi, E. & Karana, E., 2016, NordiCHI'16: Proceedings of the 9th Nordic Conference on Human-Computer Interaction. Björk, S. & Eriksson, E. (eds.). New York: Association for Computing Machinery (ACM), p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Unfolding the Notion of Experience (Virtual) Prototyping: A Framework for Prototyping in an Experience-Driven Design Process

    Camere, S. & Bordegoni, M., 2016, In : Journal of Integrated Design & Process Science. 20, 2, p. 17-30 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Water Sorption and Diffusion in (Reduced) Graphene Oxide-Alginate Biopolymer Nanocomposites

    Vilcinskas, K., Zlopasa, J., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Macromolecular Materials and Engineering. 301, 9, p. 1049-1063 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. 2017
  22. Bioinspired Design

    Blauwhoff, D., Camere, S., van der Leur, F., Karana, E., Lin, Y., Oranje, E., Picken, S., Saffarian, S., Mader, A., Knippers, J., Scherer, D., Smits, W., Taekema, J., Sarakinioti, V., Turrin, M., Vercauteren, J., Ursem, B. & Yang, S., 2017

    Research output: Non-textual formExhibitionScientific

  23. Challenges to sustainable growth of the micro-scale kuhila craft industry of India

    Majumdar, P. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Singapore: Springer, Vol. 2. p. 267-276 10 p. (Smart Innovation, Systems and Technologies; vol. 66).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Characterization of epoxy based highly filled die attach materials in microelectronics

    Maus, I., Liebl, C., Fink, M., Vu, D-K., Hartung, M., Preu, H., Jansen, K., Michel, B., Wunderle, B. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-7 7 p. 7926237

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Consumer preferences and value proposition disconnect—Assam rattan and bamboo furniture industry

    Majumdar, P., Ji, S. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Springer Singapore, Vol. 1. p. 665-677 13 p. (Smart Innovation, Systems and Technologies; vol. 65).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Designing of a semi-transparent Electroluminescent Umbrella

    Jansen, K., Claus, S. & Barati, B., 2017, Smart Systems Integration 2017: International Conference and Exhibition on Integration Issues of Miniaturized Systems. Otto, T. (ed.). Mesago Messe Frankfurt GmbH, p. 123-129 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Effects of automated tape laying heating strategies on degree of cure

    Skandali, M., Koussios, S., Sinke, J., Benedictus, R., de Mooij, C. & Jansen, K., 2017, SAMPE Europe Conference 16 Liege. New york: Curran Associates, Inc., p. 175-186 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Exploring Resolutions to the Device Paradigm with Speculative Design

    Robbins, H., Giaccardi, E. & Karana, E., 2017, p. 1-1. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  29. Five Kingdoms of DIY-Materials for Design

    Ayala-Garcia, C., Rognoli, V. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 222-234 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Fungal Curiosities

    Wösten, H. A. B., Montalti, M., Karana, E., Krijgsheld, P., Camere, S., Aappels, F. & Hamers, D., 2017

    Research output: Non-textual formExhibitionScientific

  31. Fungal Curiosities

    Camere, S., 2017

    Research output: Non-textual formExhibitionScientific

  32. Generalised non-dimensional multi-parametric involute spur gear design model considering manufacturability and geometrical compatibility

    Amani, A., Spitas, C. & Spitas, V., 2017, In : Mechanism and Machine Theory. 109, p. 250-277 28 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Giving Body to Digital Fashion Tools

    Petreca, B., 2017, Digital Bodies: Creativity and Technology in the Arts and Humanities. Broadhurst, S. & Price, S. (eds.). London: Palgrave MacMillan, p. 191-204 14 p. (Palgrave Studies in Performance and Technology).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  34. Growing Seasons, 3D printing mycelium-base materials

    Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

    Research output: Non-textual formExhibitionScientific

  35. Growing materials for product design

    Camere, S. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 101-115 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Healthy ageing: Differences between elderly and non-elderly in temperature sensation and dissatisfied

    Roelofsen, P., 2017, In : Intelligent Buildings International. 9, 3, p. 123-136 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Materially yours

    Karana, E., Giaccardi, E. & Rognoli, V., 2017, Routledge Handbook of Sustainable Product Design. Chapman, J. (ed.). New York: Taylor & Francis, p. 206-221 16 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  38. Mind the Step 2017 - Growing Seasons

    Camere, S., 2017

    Research output: Non-textual formExhibitionScientific

  39. Modelling of Thermal Aging of Moulding Compound by using an Equivalent Layer Assumption

    Zhang, B., Lion, A., Johlitz, M., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Numerical Analysis and Experimental Verification of Stresses Building up in Microelectronics Packaging

    Rezaie Adli, A., 2017, 205 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  41. Prediction of thermopysiological responses to local skin cooling using the Fiala thermophysiological model

    Bogerd, N. & Jansen, K., 2017, p. 167-167. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  42. Radically Relational: Using Textiles As A Platform To Develop Methods For Embodied Design processes

    Petreca, B., Saito, C., Yu, X., Bianchi-Berthouze, N., Brown, A., Glancy, M. & Baurley, S., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 261-274 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Revived beauty: Research into aesthetic appreciation of materials to valorise materials fromwaste

    Sauerwein, M., Karana, E. & Rognoli, V., 2017, In : Sustainability. 9, 4, p. 1-20 20 p., 529.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Smart thermoregulating garments

    Jansen, K. & Bogerd, N., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 359-363 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. The Plastic Bakery: A Case of Material Driven Design

    Majumdar, P., Karana, E., Ghazal, S. & Sonneveld, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 116-128 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. The Potential of Emerging Materials

    Bogerd, N., 2017

    Research output: Non-textual formExhibitionScientific

  47. Understanding autonomy, animism and presence as a design strategy for behavior change

    Li, X., Rozendaal, M., Jansen, K. & Jonker, C., 2017, p. 1-6. 6 p.

    Research output: Contribution to conferenceAbstractScientific

  48. ‘Experience Prototyping’ Smart Material Composites

    Barati, B., Karana, E. & Foole, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 50-65 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. 2018
  50. A new methodology for the evaluation of the perceived air quality depending on the air pollution, caused by human bioeffluents, the temperature, the humidity as well as the air velocity

    Roelofsen, P., 2018, In : Intelligent Buildings International. 10, 3, p. 154-161 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. A novel 12-lead electrocardiographic system for home use: Development and usability testing

    Steijlen, A., Jansen, K., Albayrak, A., Verschure, D. O. & Van Wijk, D. F., 2018, In : JMIR mHealth and uHealth. 6, 7, p. 1-14 14 p., e10126.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Disposable, stretchable on-skin sensors for posture monitoring

    Jansen, K., Tarren, B. & Slingerland, M., 2018, WearSys 2018 : Proceedings of the 4th ACM Workshop on Wearable Systems and Applications. New York, NY: Association for Computing Machinery (ACM), p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Do-it-Yourself (DIY) Workspaces Run by Local Entrepreneurs that Transform Plastic Waste Into Valuable Water and Sanitation Products

    Diehl, J-C., Stroober, M., Majumdar, P. & Mink, A., 2018, 2018 IEEE Global Humanitarian Technology Conference (GHTC) . Piscataway, NJ: IEEE, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Editorial: Material-Enabled Changes in Design Research and Practice

    Karana, E., Fisher, T., Kane, F. & Giaccardi, E., 2018, Proceedings of DRS 2018. Storni, C., Leahy, K., McMahon, M., Lloyd, P. & Bohemia, E. (eds.). London: Design Research Society, p. 1682-1684 3 p. (Proceedings of DRS; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingForeword/postscriptScientific

Previous 1 2 Next

ID: 23837