1. 2017
  2. Growing Seasons, 3D printing mycelium-base materials

    Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

    Research output: Non-textual formExhibitionScientific

  3. Growing materials for product design

    Camere, S. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 101-115 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  4. Healthy ageing: Differences between elderly and non-elderly in temperature sensation and dissatisfied

    Roelofsen, P., 2017, In : Intelligent Buildings International. 9, 3, p. 123-136 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Materially yours

    Karana, E., Giaccardi, E. & Rognoli, V., 2017, Routledge Handbook of Sustainable Product Design. Chapman, J. (ed.). New York: Taylor & Francis, p. 206-221 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  6. Mind the Step 2017 - Growing Seasons

    Camere, S., 2017

    Research output: Non-textual formExhibitionScientific

  7. Modelling of Thermal Aging of Moulding Compound by using an Equivalent Layer Assumption

    Zhang, B., Lion, A., Johlitz, M., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  8. Numerical Analysis and Experimental Verification of Stresses Building up in Microelectronics Packaging

    Rezaie Adli, A., 2017, 205 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  9. Prediction of thermopysiological responses to local skin cooling using the Fiala thermophysiological model

    Bogerd, N. & Jansen, K., 2017, p. 167-167. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  10. Radically Relational: Using Textiles As A Platform To Develop Methods For Embodied Design processes

    Petreca, B., Saito, C., Yu, X., Bianchi-Berthouze, N., Brown, A., Glancy, M. & Baurley, S., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 261-274 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. Revived beauty: Research into aesthetic appreciation of materials to valorise materials fromwaste

    Sauerwein, M., Karana, E. & Rognoli, V., 2017, In : Sustainability. 9, 4, p. 1-20 20 p., 529.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Smart thermoregulating garments

    Jansen, K. & Bogerd, N., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 359-363 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. The Plastic Bakery: A Case of Material Driven Design

    Majumdar, P., Karana, E., Ghazal, S. & Sonneveld, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 116-128 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  14. The Potential of Emerging Materials

    Bogerd, N., 2017

    Research output: Non-textual formExhibitionScientific

  15. Understanding autonomy, animism and presence as a design strategy for behavior change

    Li, X., Rozendaal, M., Jansen, K. & Jonker, C., 2017, p. 1-6. 6 p.

    Research output: Contribution to conferenceAbstractScientific

  16. ‘Experience Prototyping’ Smart Material Composites

    Barati, B., Karana, E. & Foole, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 50-65 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  17. 2016
  18. Aging of epoxy moulding compound: Thermomechanical properties during high temperature storage

    Zhang, B., Johlitz, M., Lion, A., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). Piscataway, NJ, USA: IEEE Society, 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. Atmospheric plasma modification of polyimide sheet for joining to titanium with high temperature adhesive

    Akram, M., Jansen, KMB., Ernst, LJ. & Bhowmik, S., 2016, In : International Journal of Adhesion and Adhesives. 65, p. 63-69

    Research output: Contribution to journalArticleScientificpeer-review

  20. Colour shift and mechanism investigation on the PMMA diffuser used in LED-based luminaires

    Lu, G., van Driel, WD., Fan, X., Yazdan Mehr, M., Fan, J., Qian, C., Jansen, KMB. & Zhang, GQ., 2016, In : Optical Materials. 54, p. 282-287 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Composition dependent properties of graphene (oxide)-alginate biopolymer nanocomposites

    Vilcinskas, K., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Polymer Composites. 39 (2018), S1, p. E236-E249

    Research output: Contribution to journalArticleScientificpeer-review

  22. Computationally efficient analysis & design of optimally compact gear pairs and assessment of gear compliance

    Amani, A., 2016, 228 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  23. Effect of fiber-matrix adhesion on the creep behavior of CF/PPS composites: Temperature and physical aging characterization

    Motta Dias, MH., Jansen, KMB., Luinge, JW., Bersee, HEN. & Benedictus, R., 2016, In : Mechanics of Time Dependent Materials: an international journal devoted to the time-dependent behaviour of materials and structures. 10, 2, p. 245-262 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Emerging material experiences

    Karana, E., Pedgley, O., Rognoli, V. & Korsunsky, A., 2016, In : Materials & Design. 90, p. 1248-1250 3 p.

    Research output: Contribution to journalEditorialScientificpeer-review

  25. Functional Demonstrators to Support Understanding of Smart Materials

    Barati, B., Karana, E., Jansen, K. & Hekkert, P., 2016, TEI'16 Proceedings of the TEI'16: Tenth International Conference on Tangible, Embedded and Embodied Internaction. Broekhuijsen, M. (ed.). New York: Association for Computing Machinery (ACM), p. 386-391 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  26. Materializing experiential visions into sensory properties: The use of the experience map

    Camere, S., Schifferstein, R. & Bordegoni, M., 2016, Proceedings of the Tenth International Conference on Design and Emotion - Celebration & Contemplation. Desmet, P. M. A., Fokkinga, S. F., Ludden, G. D. S., Cila, N. & Van Zuthem, H. (eds.). Amsterdam: The Design & Emotion Society, p. 201-210 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  27. Mechanical characterization of a shape morphing smart composite with embedded shape memory alloys in a shape memory polymer matrix

    Lelieveld, C., Jansen, K. & Teuffel, P., 2016, In : Journal of Intelligent Material Systems and Structures. 27, 15, p. 2038-2048 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Numerical investigation and experimental validation of residual stresses building up in microelectronics packaging

    Rezaie Adli, A. & Jansen, K., 2016, In : Microelectronics Reliability. 60, p. 26-38 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Perception of naturalness in textiles

    Overvliet, KE., Karana, E. & Soto-Faraco, S., 2016, In : Materials & Design. 90, p. 1192-1199 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. The Tuning of Materials: A Designer's Journey

    Karana, E., Giaccardi, E., Stamhuis, N. & Goossensen, J., 2016, DIS '16 Proceedings of the 2016 ACM Conference on Designing Interactive Systems. Foth, M. (ed.). New York: Association for Computing Machinery (ACM), p. 619-631 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  31. Thermo-viscoelastic analysis of GLARE

    Abouhamzeh, M., Sinke, J., Jansen, K. M. B. & Benedictus, R., 2016, In : Composites Part B: Engineering. 99, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Traces as an Approach to Design for Focal Things and Practices

    Robbins, H., Giaccardi, E. & Karana, E., 2016, NordiCHI'16: Proceedings of the 9th Nordic Conference on Human-Computer Interaction. Björk, S. & Eriksson, E. (eds.). New York: Association for Computing Machinery (ACM), p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  33. Unfolding the Notion of Experience (Virtual) Prototyping: A Framework for Prototyping in an Experience-Driven Design Process

    Camere, S. & Bordegoni, M., 2016, In : Journal of Integrated Design & Process Science. 20, 2, p. 17-30 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Water Sorption and Diffusion in (Reduced) Graphene Oxide-Alginate Biopolymer Nanocomposites

    Vilcinskas, K., Zlopasa, J., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Macromolecular Materials and Engineering. 301, 9, p. 1049-1063 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. 2015
  36. Fostering Psychosocial Development and Well-being for Teenagers with Cancer through Playful Experiences

    D'Olivo, P., Rozendaal, M. & Giaccardi, E., 2015, Workshop. 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  37. 2013
  38. Materials experience: Fundamentals of materials and design

    Karana, E. (ed.), Pedgley, O. (ed.) & Rognoli, V., 2013, Oxford: Butterworth Heinemann. 352 p.

    Research output: Book/ReportBook editingScientific

Previous 1 2 Next

ID: 23837