1. 3D Printed Actuators: Reversibility, Relaxation, and Ratcheting

    Zhao, S. C., Maas, M., Jansen, K. & van Hecke, M., 2019, In : Advanced Functional Materials. 29, 51, 8 p., 1905545.

    Research output: Contribution to journalArticleScientificpeer-review

  2. A comparison of the dynamic thermal sensation between the modified Stolwijk model and the Fiala thermal physiology and comfort (FPC) model

    Roelofsen, P., 2019, In : Intelligent Buildings International. 11 p.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  3. A new methodology for the evaluation of the perceived air quality depending on the air pollution, caused by human bioeffluents, the temperature, the humidity as well as the air velocity

    Roelofsen, P., 2018, In : Intelligent Buildings International. 10, 3, p. 154-161 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. A novel 12-lead electrocardiographic system for home use: Development and usability testing

    Steijlen, A., Jansen, K., Albayrak, A., Verschure, D. O. & Van Wijk, D. F., 2018, In : JMIR mHealth and uHealth. 6, 7, p. 1-14 14 p., e10126.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Affordances as materials potential: What design can do for materials development

    Barati, B. & Karana, E., 2019, In : International Journal of Design. 13, 3, p. 105-123 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Aging of epoxy moulding compound: Thermomechanical properties during high temperature storage

    Zhang, B., Johlitz, M., Lion, A., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). Piscataway, NJ, USA: IEEE Society, 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  7. Alive. Active. Adaptive: Experiential knowledge and emerging materials

    Karana, E., Nimkulrat, N., Giaccardi, E., Niedderer, K. & Fan, J. N., 2019, In : International Journal of Design. 13, 2, p. 1-5 5 p.

    Research output: Contribution to journalEditorialScientific

  8. Atmospheric plasma modification of polyimide sheet for joining to titanium with high temperature adhesive

    Akram, M., Jansen, KMB., Ernst, LJ. & Bhowmik, S., 2016, In : International Journal of Adhesion and Adhesives. 65, p. 63-69

    Research output: Contribution to journalArticleScientificpeer-review

  9. Bioinspired Design

    Blauwhoff, D., Camere, S., van der Leur, F., Karana, E., Lin, Y., Oranje, E., Picken, S., Saffarian, S., Mader, A., Knippers, J., Scherer, D., Smits, W., Taekema, J., Sarakinioti, V., Turrin, M., Vercauteren, J., Ursem, B. & Yang, S., 2017

    Research output: Non-textual formExhibitionScientific

  10. Challenges to sustainable growth of the micro-scale kuhila craft industry of India

    Majumdar, P. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Singapore: Springer, Vol. 2. p. 267-276 10 p. (Smart Innovation, Systems and Technologies; vol. 66).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. Characterization of epoxy based highly filled die attach materials in microelectronics

    Maus, I., Liebl, C., Fink, M., Vu, D-K., Hartung, M., Preu, H., Jansen, K., Michel, B., Wunderle, B. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-7 7 p. 7926237

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  12. Characterization of variable stiffness joints for adaptive structures

    Wang, Q., Habraken, A., Teuffel, P., Senatore, G. & Jansen, K., 1 Jan 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019. Zingoni, A. (ed.). CRC Press / Balkema, p. 1045-1050 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. Colour shift and mechanism investigation on the PMMA diffuser used in LED-based luminaires

    Lu, G., van Driel, WD., Fan, X., Yazdan Mehr, M., Fan, J., Qian, C., Jansen, KMB. & Zhang, GQ., 2016, In : Optical Materials. 54, p. 282-287 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Composition dependent properties of graphene (oxide)-alginate biopolymer nanocomposites

    Vilcinskas, K., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Polymer Composites. 39 (2018), S1, p. E236-E249

    Research output: Contribution to journalArticleScientificpeer-review

  15. Computationally efficient analysis & design of optimally compact gear pairs and assessment of gear compliance

    Amani, A., 2016, 228 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  16. Connected us! how social motives determine diy behaviorism in rural base of the pyramid communities

    Majumdar, P., Banerjee, S., Diehl, J. C. & Van Engelen, J. M. L., 2019, Research into Design for a Connected World - Proceedings of ICoRD 2019 Volume 1. Chakrabarti, A. (ed.). Springer, p. 807-819 13 p. (Smart Innovation, Systems and Technologies; vol. 134).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  17. Consumer preferences and value proposition disconnect—Assam rattan and bamboo furniture industry

    Majumdar, P., Ji, S. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Springer, Vol. 1. p. 665-677 13 p. (Smart Innovation, Systems and Technologies; vol. 65).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  18. Creep behaviour of FM906 glass-fibre epoxy as used in heated fibre metal laminates

    Hagenbeek, M., Dias, M. M., Sinke, J. & Jansen, K., Nov 2019, In : Journal of Composite Materials. 53, 26-27, p. 3829-3840 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Design and characterization of variable stiffness structural joints

    Wang, Q., Senatore, G., Jansen, K., Habraken, A. & Teuffel, P., 2020, In : Materials and Design. 187, 108353.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Design touch matters: Bending and stretching the potentials of smart material composites

    Barati, B., 2019, 176 p.

    Research output: ThesisDissertation (TU Delft)Scientific

Previous 1 2 3 4 5 Next

ID: 23837