1. 3D Printed Actuators: Reversibility, Relaxation, and Ratcheting

    Zhao, S. C., Maas, M., Jansen, K. & van Hecke, M., 2019, In : Advanced Functional Materials. 29, 51, 8 p., 1905545.

    Research output: Contribution to journalArticleScientificpeer-review

  2. A comparison of the dynamic thermal sensation between the modified Stolwijk model and the Fiala thermal physiology and comfort (FPC) model

    Roelofsen, P., 2019, In : Intelligent Buildings International. 11 p.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  3. A new methodology for the evaluation of the perceived air quality depending on the air pollution, caused by human bioeffluents, the temperature, the humidity as well as the air velocity

    Roelofsen, P., 2018, In : Intelligent Buildings International. 10, 3, p. 154-161 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. A novel 12-lead electrocardiographic system for home use: Development and usability testing

    Steijlen, A., Jansen, K., Albayrak, A., Verschure, D. O. & Van Wijk, D. F., 2018, In : JMIR mHealth and uHealth. 6, 7, p. 1-14 14 p., e10126.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Affordances as materials potential: What design can do for materials development

    Barati, B. & Karana, E., 2019, In : International Journal of Design. 13, 3, p. 105-123 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Aging of epoxy moulding compound: Thermomechanical properties during high temperature storage

    Zhang, B., Johlitz, M., Lion, A., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). Piscataway, NJ, USA: IEEE Society, 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  7. Alive. Active. Adaptive: Experiential knowledge and emerging materials

    Karana, E., Nimkulrat, N., Giaccardi, E., Niedderer, K. & Fan, J. N., 2019, In : International Journal of Design. 13, 2, p. 1-5 5 p.

    Research output: Contribution to journalEditorialScientific

  8. Atmospheric plasma modification of polyimide sheet for joining to titanium with high temperature adhesive

    Akram, M., Jansen, KMB., Ernst, LJ. & Bhowmik, S., 2016, In : International Journal of Adhesion and Adhesives. 65, p. 63-69

    Research output: Contribution to journalArticleScientificpeer-review

  9. Bioinspired Design

    Blauwhoff, D., Camere, S., van der Leur, F., Karana, E., Lin, Y., Oranje, E., Picken, S., Saffarian, S., Mader, A., Knippers, J., Scherer, D., Smits, W., Taekema, J., Sarakinioti, V., Turrin, M., Vercauteren, J., Ursem, B. & Yang, S., 2017

    Research output: Non-textual formExhibitionScientific

  10. Challenges to sustainable growth of the micro-scale kuhila craft industry of India

    Majumdar, P. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Singapore: Springer, Vol. 2. p. 267-276 10 p. (Smart Innovation, Systems and Technologies; vol. 66).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. Characterization of epoxy based highly filled die attach materials in microelectronics

    Maus, I., Liebl, C., Fink, M., Vu, D-K., Hartung, M., Preu, H., Jansen, K., Michel, B., Wunderle, B. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-7 7 p. 7926237

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  12. Characterization of variable stiffness joints for adaptive structures

    Wang, Q., Habraken, A., Teuffel, P., Senatore, G. & Jansen, K., 1 Jan 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019. Zingoni, A. (ed.). CRC Press / Balkema, p. 1045-1050 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. Colour shift and mechanism investigation on the PMMA diffuser used in LED-based luminaires

    Lu, G., van Driel, WD., Fan, X., Yazdan Mehr, M., Fan, J., Qian, C., Jansen, KMB. & Zhang, GQ., 2016, In : Optical Materials. 54, p. 282-287 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Composition dependent properties of graphene (oxide)-alginate biopolymer nanocomposites

    Vilcinskas, K., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Polymer Composites. 39 (2018), S1, p. E236-E249

    Research output: Contribution to journalArticleScientificpeer-review

  15. Computationally efficient analysis & design of optimally compact gear pairs and assessment of gear compliance

    Amani, A., 2016, 228 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  16. Connected us! how social motives determine diy behaviorism in rural base of the pyramid communities

    Majumdar, P., Banerjee, S., Diehl, J. C. & Van Engelen, J. M. L., 2019, Research into Design for a Connected World - Proceedings of ICoRD 2019 Volume 1. Chakrabarti, A. (ed.). Springer, p. 807-819 13 p. (Smart Innovation, Systems and Technologies; vol. 134).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  17. Consumer preferences and value proposition disconnect—Assam rattan and bamboo furniture industry

    Majumdar, P., Ji, S. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Springer, Vol. 1. p. 665-677 13 p. (Smart Innovation, Systems and Technologies; vol. 65).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  18. Creep behaviour of FM906 glass-fibre epoxy as used in heated fibre metal laminates

    Hagenbeek, M., Dias, M. M., Sinke, J. & Jansen, K., Nov 2019, In : Journal of Composite Materials. 53, 26-27, p. 3829-3840 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Design and characterization of variable stiffness structural joints

    Wang, Q., Senatore, G., Jansen, K., Habraken, A. & Teuffel, P., 2020, In : Materials and Design. 187, 108353.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Design touch matters: Bending and stretching the potentials of smart material composites

    Barati, B., 2019, 176 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  21. Designing of a semi-transparent Electroluminescent Umbrella

    Jansen, K., Claus, S. & Barati, B., 2017, Smart Systems Integration 2017: International Conference and Exhibition on Integration Issues of Miniaturized Systems. Otto, T. (ed.). Mesago Messe Frankfurt GmbH, p. 123-129 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  22. Disposable, stretchable on-skin sensors for posture monitoring

    Jansen, K., Tarren, B. & Slingerland, M., 2018, WearSys 2018 : Proceedings of the 4th ACM Workshop on Wearable Systems and Applications. New York, NY: Association for Computing Machinery (ACM), p. 1-4 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  23. Do-it-Yourself (DIY) Workspaces Run by Local Entrepreneurs that Transform Plastic Waste Into Valuable Water and Sanitation Products

    Diehl, J-C., Stroober, M., Majumdar, P. & Mink, A., 2018, 2018 IEEE Global Humanitarian Technology Conference (GHTC) . Piscataway, NJ: IEEE, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Editorial: Material-Enabled Changes in Design Research and Practice

    Karana, E., Fisher, T., Kane, F. & Giaccardi, E., 2018, Proceedings of DRS 2018. Storni, C., Leahy, K., McMahon, M., Lloyd, P. & Bohemia, E. (eds.). London: Design Research Society, p. 1682-1684 3 p. (Proceedings of DRS; vol. 4).

    Research output: Chapter in Book/Conference proceedings/Edited volumeForeword/postscriptScientific

  25. Effect of fiber-matrix adhesion on the creep behavior of CF/PPS composites: Temperature and physical aging characterization

    Motta Dias, MH., Jansen, KMB., Luinge, JW., Bersee, HEN. & Benedictus, R., 2016, In : Mechanics of Time Dependent Materials: an international journal devoted to the time-dependent behaviour of materials and structures. 10, 2, p. 245-262 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Effect of temperature and humidity on moisture diffusion in an epoxy moulding compound material

    Jansen, K. M. B., Zhang, M. F., Ernst, L. J., Vu, D. K. & Weiss, L., 2020, In : Microelectronics Reliability. 107, 6 p., 113596.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Effects of automated tape laying heating strategies on degree of cure

    Skandali, M., Koussios, S., Sinke, J., Benedictus, R., de Mooij, C. & Jansen, K., 2017, SAMPE Europe Conference 16 Liege. New york: Curran Associates, Inc., p. 175-186 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  28. Effects of surface modification on optical properties and thermal stability of K2SiF6:Mn4+ red phosphors by deposition of an ultrathin Al2O3 layer using gas-phase deposition in a fluidized bed reactor

    Ten Kate, O. M., Zhao, Y., Jansen, K. M. B., Ruud Van Ommen, J. & Hintzen, H. T., 2019, In : ECS Journal of Solid State Science and Technology. 8, 6, p. R88-R96

    Research output: Contribution to journalArticleScientificpeer-review

  29. Emerging material experiences

    Karana, E., Pedgley, O., Rognoli, V. & Korsunsky, A., 2016, In : Materials & Design. 90, p. 1248-1250 3 p.

    Research output: Contribution to journalEditorialScientificpeer-review

  30. Experiential characterization of materials in product design: A literature review

    Veelaert, L., Du Bois, E., Moons, I. & Karana, E., 2020, In : Materials and Design. 190, p. 16 108543.

    Research output: Contribution to journalReview articleScientificpeer-review

  31. Exploring Resolutions to the Device Paradigm with Speculative Design

    Robbins, H., Giaccardi, E. & Karana, E., 2017, p. 1-1. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  32. Fabricating materials from living organisms: An emerging design practice

    Camere, S. & Karana, E., 2018, In : Journal of Cleaner Production. 186, p. 570-584 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Fabrication factors influencing mechanical, moisture- and water-related properties of mycelium-based composites

    Appels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P. & Wösten, H. A. B., 2019, In : Materials and Design. 161, p. 64-71 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Five Kingdoms of DIY-Materials for Design

    Ayala-Garcia, C., Rognoli, V. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 222-234 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  35. Fostering Psychosocial Development and Well-being for Teenagers with Cancer through Playful Experiences

    D'Olivo, P., Rozendaal, M. & Giaccardi, E., 2015, Workshop. 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  36. From Abstract to Tangible: Supporting the Materialization of Experiential Visions with the Experience Map

    Camere, S., Schifferstein, H. N. J. & Bordegoni, M., 2018, In : International Journal of Design. 12, 2, p. 51-73 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Functional Demonstrators to Support Understanding of Smart Materials

    Barati, B., Karana, E., Jansen, K. & Hekkert, P., 2016, TEI'16 Proceedings of the TEI'16: Tenth International Conference on Tangible, Embedded and Embodied Internaction. Broekhuijsen, M. (ed.). New York: Association for Computing Machinery (ACM), p. 386-391 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  38. Fungal Curiosities

    Camere, S., 2017

    Research output: Non-textual formExhibitionScientific

  39. Fungal Curiosities

    Wösten, H. A. B., Montalti, M., Karana, E., Krijgsheld, P., Camere, S., Aappels, F. & Hamers, D., 2017

    Research output: Non-textual formExhibitionScientific

  40. Generalised non-dimensional multi-parametric involute spur gear design model considering manufacturability and geometrical compatibility

    Amani, A., Spitas, C. & Spitas, V., 2017, In : Mechanism and Machine Theory. 109, p. 250-277 28 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Giving Body to Digital Fashion Tools

    Petreca, B., 2017, Digital Bodies: Creativity and Technology in the Arts and Humanities. Broadhurst, S. & Price, S. (eds.). London: Palgrave MacMillan, p. 191-204 14 p. (Palgrave Studies in Performance and Technology).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  42. Growing Seasons, 3D printing mycelium-base materials

    Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

    Research output: Non-textual formExhibitionScientific

  43. Growing materials for product design

    Camere, S. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 101-115 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  44. Healthy ageing: Differences between elderly and non-elderly in temperature sensation and dissatisfied

    Roelofsen, P., 2017, In : Intelligent Buildings International. 9, 3, p. 123-136 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. How to shape the future of smart clothing

    Jansen, K. M. B., 2019, UbiComp/ISWC 2019- - Adjunct Proceedings of the 2019 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2019 ACM International Symposium on Wearable Computers. Harle, R., Farrahi, K. & Lane, N. (eds.). New York, USA: Association for Computing Machinery (ACM), p. 1037-1039 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  46. Hydrophobin gene deletion and environmental growth conditions impact mechanical properties of mycelium by affecting the density of the material

    Appels, F. V. W., Dijksterhuis, J., Lukasiewicz, C. E., Jansen, K., Wösten, H. A. B. & Krijgsheld, P., 2018, In : Scientific Reports. 8, 1, p. 1-7 7 p., 4703.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Lifetime and damage characterization of compacted graphite iron during thermo-mechanical fatigue under varying constraint conditions

    Lopez-Covaleda, E. A., Ghodrat, S. & Kestens, L. A. I., 2020, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 1, p. 226-236 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Location optimisation for IMUs in the design of motion tracking soccer tights based on Soft Tissue Artefact analysis

    Ahsmann, L., Steijlen, A., Wilmes, E., Jansen, K. & Huysmans, T., 2019. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  49. Materializing experiential visions into sensory properties: The use of the experience map

    Camere, S., Schifferstein, R. & Bordegoni, M., 2016, Proceedings of the Tenth International Conference on Design and Emotion - Celebration & Contemplation. Desmet, P. M. A., Fokkinga, S. F., Ludden, G. D. S., Cila, N. & Van Zuthem, H. (eds.). Amsterdam: The Design & Emotion Society, p. 201-210 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  50. Materially yours

    Karana, E., Giaccardi, E. & Rognoli, V., 2017, Routledge Handbook of Sustainable Product Design. Chapman, J. (ed.). New York: Taylor & Francis, p. 206-221 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

Previous 1 2 Next

ID: 23837