1. ‘Experience Prototyping’ Smart Material Composites

    Barati, B., Karana, E. & Foole, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 50-65 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  2. When the Material Grows: A Case Study on Designing (with) Mycelium-based Materials

    Karana, E., Blauwhoff, D., Hultink, E-J. & Camere, S., 2018, In : International Journal of Design. 12, 2, p. 119-136 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. What Does My Shirt Tell Me? The Integrating of Electronics in Clothing

    Jansen, K. M. B., 2019, 2019 Pan Pacific Microelectronics Symposium (Pan Pacific). Piscataway, NJ, USA: IEEE, p. 1-4 4 p. 8696601

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  4. WearSys'2018 chairs' welcome

    Jansen, K. & Ashok, A., 2018, WearSys 2018 : Proceedings of the 4th ACM Workshop on Wearable Systems and Applications. Jansen, K. & Mortier, R. (eds.). p. ii

    Research output: Chapter in Book/Conference proceedings/Edited volumeForeword/postscriptScientific

  5. Water Sorption and Diffusion in (Reduced) Graphene Oxide-Alginate Biopolymer Nanocomposites

    Vilcinskas, K., Zlopasa, J., Jansen, K. M. B., Mulder, F. M., Picken, S. J. & Koper, G. J. M., 2016, In : Macromolecular Materials and Engineering. 301, 9, p. 1049-1063 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Unfolding the Notion of Experience (Virtual) Prototyping: A Framework for Prototyping in an Experience-Driven Design Process

    Camere, S. & Bordegoni, M., 2016, In : Journal of Integrated Design & Process Science. 20, 2, p. 17-30 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Understanding autonomy, animism and presence as a design strategy for behavior change

    Li, X., Rozendaal, M., Jansen, K. & Jonker, C., 2017, p. 1-6. 6 p.

    Research output: Contribution to conferenceAbstractScientific

  8. Traces as an Approach to Design for Focal Things and Practices

    Robbins, H., Giaccardi, E. & Karana, E., 2016, NordiCHI'16: Proceedings of the 9th Nordic Conference on Human-Computer Interaction. Björk, S. & Eriksson, E. (eds.). New York: Association for Computing Machinery (ACM), p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  9. Towards High Performance Metal–Organic Framework–Microporous Polymer Mixed Matrix Membranes: Addressing Compatibility and Limiting Aging by Polymer Doping

    Sabetghadam, A., Liu, X., Orsi, A. F., Lozinska, M. M., Johnson, T., Jansen, K., Wright, P. A., Carta, M., McKeown, N. B., Kapteijn, F. & Gascon, J., 2018, In : Chemistry - A European Journal. 24, 49, p. 12796-12800

    Research output: Contribution to journalArticleScientificpeer-review

  10. Thermo-viscoelastic analysis of GLARE

    Abouhamzeh, M., Sinke, J., Jansen, K. M. B. & Benedictus, R., 2016, In : Composites Part B: Engineering. 99, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Thermo-Mechanical Fatigue Lifetime Assessment of Spheroidal Cast Iron at Different Thermal Constraint Levels

    Ghodrat, S., Kalra, A., Kestens, L. & Riemslag, T., 2019, In : Metals. 9, 10, 23 p., 1068.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Thermal aging modeling of molding compound under high-temperature storage and temperature cycling conditions

    Zhang, B., Johlitz, M., Lion, A., Ernst, L. J., Jansen, K., Vu, D-K. & Weiss, L., 2018, 2018 19th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2018. Piscataway, NJ: IEEE, p. 1-5 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. The making of performativity in designing [with] smart material composites

    Barati, B., Giaccardi, E. & Karana, E., 2018, CHI'18 Proceedings of the 2018 CHI Conference on Human Factors in Computing Systems. New York: Association for Computing Machinery (ACM), p. 1-11 11 p. 5

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  14. The Tuning of Materials: A Designer's Journey

    Karana, E., Giaccardi, E., Stamhuis, N. & Goossensen, J., 2016, DIS '16 Proceedings of the 2016 ACM Conference on Designing Interactive Systems. Foth, M. (ed.). New York: Association for Computing Machinery (ACM), p. 619-631 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  15. The Potential of Emerging Materials

    Bogerd, N., 2017

    Research output: Non-textual formExhibitionScientific

  16. The Plastic Bakery: A Case of Material Driven Design

    Majumdar, P., Karana, E., Ghazal, S. & Sonneveld, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 116-128 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  17. Smart thermoregulating garments

    Jansen, K. & Bogerd, N., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 359-363 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  18. Smart textiles: How electronics merge into our clothing

    Jansen, K. M. B., 2019, 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2019. Piscataway, NJ, USA: Institute of Electrical and Electronics Engineers (IEEE), 4 p. 8724586

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. Small-scale piped water supply: End-user inclusive water research in arsenic affected areas in India and Bangladesh (DELTAP)

    van Halem, D., Hoque, B. A., Ghosh, A. K., Donselaar, M. E., Karana, E., Bhattacharya, P. & Ahmed, K. M., 2018, p. 636-637. 2 p.

    Research output: Contribution to conferenceAbstractScientific

  20. Semi in-situ observation of crack initiation in compacted graphite iron during thermo mechanical fatigue

    Lopez-Covaleda, E. A., Ghodrat, S. & Kestens, L. A. I., 2020, In : International Journal of Fatigue. 137, 9 p., 105648.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Revived beauty: Research into aesthetic appreciation of materials to valorise materials fromwaste

    Sauerwein, M., Karana, E. & Rognoli, V., 2017, In : Sustainability. 9, 4, p. 1-20 20 p., 529.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Reshaping touch communication: An interdisciplinary research agenda

    Price, S., Leder Mackley, K., Jewitt, C., Huisman, G., Petreca, B., Berthouze, N., Prattichizzo, D. & Hayward, V., 2018, p. 1-8. 8 p.

    Research output: Contribution to conferenceAbstractScientific

  23. Radically Relational: Using Textiles As A Platform To Develop Methods For Embodied Design processes

    Petreca, B., Saito, C., Yu, X., Bianchi-Berthouze, N., Brown, A., Glancy, M. & Baurley, S., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 261-274 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Prototyping materials experience: Towards a shared understanding of underdeveloped smart material composites

    Barati, B., Karana, E. & Hekkert, P., 2019, In : International Journal of Design. 13, 2, p. 21-38 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Proposal of characterization procedure of metal-graphite interface strength in compacted graphite iron

    Lopez-Covaleda, E. A., Ghodrat, S., Kestens, L. A. I., Sacre, C. H. & Pardoen, T., 7 Jul 2018, In : Materials. 11, 7, 12 p., 1159.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Prediction of thermopysiological responses to local skin cooling using the Fiala thermophysiological model

    Bogerd, N. & Jansen, K., 2017, p. 167-167. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  27. Perception of naturalness in textiles

    Overvliet, KE., Karana, E. & Soto-Faraco, S., 2016, In : Materials & Design. 90, p. 1192-1199 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Numerical investigation and experimental validation of residual stresses building up in microelectronics packaging

    Rezaie Adli, A. & Jansen, K., 2016, In : Microelectronics Reliability. 60, p. 26-38 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Numerical Analysis and Experimental Verification of Stresses Building up in Microelectronics Packaging

    Rezaie Adli, A., 2017, 205 p.

    Research output: ThesisDissertation (TU Delft)

  30. Motivation for do-it-yourself in rural base of the pyramid communities and the changing landscape

    Majumdar, P., Banerjee, S., Diehl, J. C. & van Engelen, J. M. L., 2019, Research into Design for a Connected World - Proceedings of ICoRD 2019 Volume 2. Chakrabarti, A. (ed.). Springer, p. 611-625 15 p. (Smart Innovation, Systems and Technologies; vol. 135).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  31. Modelling of Thermal Aging of Moulding Compound by using an Equivalent Layer Assumption

    Zhang, B., Lion, A., Johlitz, M., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  32. Mind the Step 2017 - Growing Seasons

    Camere, S., 2017

    Research output: Non-textual formExhibitionScientific

  33. Mechanical characterization of a shape morphing smart composite with embedded shape memory alloys in a shape memory polymer matrix

    Lelieveld, C., Jansen, K. & Teuffel, P., 2016, In : Journal of Intelligent Material Systems and Structures. 27, 15, p. 2038-2048 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Materials experience: Fundamentals of materials and design

    Karana, E. (ed.), Pedgley, O. (ed.) & Rognoli, V., 2013, Oxford: Butterworth Heinemann. 352 p.

    Research output: Book/ReportBook editingScientific

  35. Materially yours

    Karana, E., Giaccardi, E. & Rognoli, V., 2017, Routledge Handbook of Sustainable Product Design. Chapman, J. (ed.). New York: Taylor & Francis, p. 206-221 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  36. Materializing experiential visions into sensory properties: The use of the experience map

    Camere, S., Schifferstein, R. & Bordegoni, M., 2016, Proceedings of the Tenth International Conference on Design and Emotion - Celebration & Contemplation. Desmet, P. M. A., Fokkinga, S. F., Ludden, G. D. S., Cila, N. & Van Zuthem, H. (eds.). Amsterdam: The Design & Emotion Society, p. 201-210 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  37. Location optimisation for IMUs in the design of motion tracking soccer tights based on Soft Tissue Artefact analysis

    Ahsmann, L., Steijlen, A., Wilmes, E., Jansen, K. & Huysmans, T., 2019. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  38. Lifetime and damage characterization of compacted graphite iron during thermo-mechanical fatigue under varying constraint conditions

    Lopez-Covaleda, E. A., Ghodrat, S. & Kestens, L. A. I., 2020, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 1, p. 226-236 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Hydrophobin gene deletion and environmental growth conditions impact mechanical properties of mycelium by affecting the density of the material

    Appels, F. V. W., Dijksterhuis, J., Lukasiewicz, C. E., Jansen, K., Wösten, H. A. B. & Krijgsheld, P., 2018, In : Scientific Reports. 8, 1, p. 1-7 7 p., 4703.

    Research output: Contribution to journalArticleScientificpeer-review

  40. How to shape the future of smart clothing

    Jansen, K. M. B., 2019, UbiComp/ISWC 2019- - Adjunct Proceedings of the 2019 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2019 ACM International Symposium on Wearable Computers. Harle, R., Farrahi, K. & Lane, N. (eds.). New York, USA: Association for Computing Machinery (ACM), p. 1037-1039 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  41. Healthy ageing: Differences between elderly and non-elderly in temperature sensation and dissatisfied

    Roelofsen, P., 2017, In : Intelligent Buildings International. 9, 3, p. 123-136 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Growing materials for product design

    Camere, S. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 101-115 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  43. Growing Seasons, 3D printing mycelium-base materials

    Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

    Research output: Non-textual formExhibitionScientific

  44. Giving Body to Digital Fashion Tools

    Petreca, B., 2017, Digital Bodies: Creativity and Technology in the Arts and Humanities. Broadhurst, S. & Price, S. (eds.). London: Palgrave MacMillan, p. 191-204 14 p. (Palgrave Studies in Performance and Technology).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  45. Generalised non-dimensional multi-parametric involute spur gear design model considering manufacturability and geometrical compatibility

    Amani, A., Spitas, C. & Spitas, V., 2017, In : Mechanism and Machine Theory. 109, p. 250-277 28 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Fungal Curiosities

    Wösten, H. A. B., Montalti, M., Karana, E., Krijgsheld, P., Camere, S., Aappels, F. & Hamers, D., 2017

    Research output: Non-textual formExhibitionScientific

  47. Fungal Curiosities

    Camere, S., 2017

    Research output: Non-textual formExhibitionScientific

  48. Functional Demonstrators to Support Understanding of Smart Materials

    Barati, B., Karana, E., Jansen, K. & Hekkert, P., 2016, TEI'16 Proceedings of the TEI'16: Tenth International Conference on Tangible, Embedded and Embodied Internaction. Broekhuijsen, M. (ed.). New York: Association for Computing Machinery (ACM), p. 386-391 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  49. From Abstract to Tangible: Supporting the Materialization of Experiential Visions with the Experience Map

    Camere, S., Schifferstein, H. N. J. & Bordegoni, M., 2018, In : International Journal of Design. 12, 2, p. 51-73 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Fostering Psychosocial Development and Well-being for Teenagers with Cancer through Playful Experiences

    D'Olivo, P., Rozendaal, M. & Giaccardi, E., 2015, Workshop. 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Previous 1 2 Next

ID: 23837