1. Dissertation (TU Delft) › Scientific
  2. Computationally efficient analysis & design of optimally compact gear pairs and assessment of gear compliance

    Amani, A., 2016, 228 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  3. Design touch matters: Bending and stretching the potentials of smart material composites

    Barati, B., 2019, 176 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  4. Numerical Analysis and Experimental Verification of Stresses Building up in Microelectronics Packaging

    Rezaie Adli, A., 2017, 205 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  5. Exhibition › Scientific
  6. Bioinspired Design

    Blauwhoff, D., Camere, S., van der Leur, F., Karana, E., Lin, Y., Oranje, E., Picken, S., Saffarian, S., Mader, A., Knippers, J., Scherer, D., Smits, W., Taekema, J., Sarakinioti, V., Turrin, M., Vercauteren, J., Ursem, B. & Yang, S., 2017

    Research output: Non-textual formExhibitionScientific

  7. Fungal Curiosities

    Camere, S., 2017

    Research output: Non-textual formExhibitionScientific

  8. Fungal Curiosities

    Wösten, H. A. B., Montalti, M., Karana, E., Krijgsheld, P., Camere, S., Aappels, F. & Hamers, D., 2017

    Research output: Non-textual formExhibitionScientific

  9. Growing Seasons, 3D printing mycelium-base materials

    Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

    Research output: Non-textual formExhibitionScientific

  10. Mind the Step 2017 - Growing Seasons

    Camere, S., 2017

    Research output: Non-textual formExhibitionScientific

  11. The Potential of Emerging Materials

    Bogerd, N., 2017

    Research output: Non-textual formExhibitionScientific

  12. Book editing › Scientific › Not peer-reviewed
  13. Materials experience: Fundamentals of materials and design

    Karana, E. (ed.), Pedgley, O. (ed.) & Rognoli, V., 2013, Oxford: Butteerworth-Heinemann Elsevier. 352 p.

    Research output: Book/ReportBook editingScientific

  14. Abstract › Scientific
  15. Exploring Resolutions to the Device Paradigm with Speculative Design

    Robbins, H., Giaccardi, E. & Karana, E., 2017, p. 1-1. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  16. Location optimisation for IMUs in the design of motion tracking soccer tights based on Soft Tissue Artefact analysis

    Ahsmann, L., Steijlen, A., Wilmes, E., Jansen, K. & Huysmans, T., 26 Mar 2019, (Accepted/In press).

    Research output: Contribution to conferenceAbstractScientific

  17. Prediction of thermopysiological responses to local skin cooling using the Fiala thermophysiological model

    Bogerd, N. & Jansen, K., 2017, p. 167-167. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  18. Reshaping touch communication: An interdisciplinary research agenda

    Price, S., Leder Mackley, K., Jewitt, C., Huisman, G., Petreca, B., Berthouze, N., Prattichizzo, D. & Hayward, V., 2018, p. 1-8. 8 p.

    Research output: Contribution to conferenceAbstractScientific

  19. Understanding autonomy, animism and presence as a design strategy for behavior change

    Li, X., Rozendaal, M., Jansen, K. & Jonker, C., 2017, p. 1-6. 6 p.

    Research output: Contribution to conferenceAbstractScientific

  20. Foreword/postscript › Scientific
  21. Editorial: Material-Enabled Changes in Design Research and Practice

    Karana, E., Fisher, T., Kane, F. & Giaccardi, E., 2018, Proceedings of DRS 2018. Storni, C., Leahy, K., McMahon, M., Lloyd, P. & Bohemia, E. (eds.). London: Design Research Society, p. 1682-1684 3 p. (Proceedings of DRS; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingForeword/postscriptScientific

  22. WearSys'2018 chairs' welcome

    Jansen, K. & Ashok, A., 2018, WearSys 2018 : Proceedings of the 4th ACM Workshop on Wearable Systems and Applications. Jansen, K. & Mortier, R. (eds.). p. ii

    Research output: Chapter in Book/Report/Conference proceedingForeword/postscriptScientific

  23. Conference contribution › Scientific › Peer-reviewed
  24. Aging of epoxy moulding compound: Thermomechanical properties during high temperature storage

    Zhang, B., Johlitz, M., Lion, A., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2016, Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE): 2016 17th International Conference. Piscataway: IEEE Society, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Challenges to sustainable growth of the micro-scale kuhila craft industry of India

    Majumdar, P. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Singapore: Springer, Vol. 2. p. 267-276 10 p. (Smart Innovation, Systems and Technologies; vol. 66).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Characterization of epoxy based highly filled die attach materials in microelectronics

    Maus, I., Liebl, C., Fink, M., Vu, D-K., Hartung, M., Preu, H., Jansen, K., Michel, B., Wunderle, B. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-7 7 p. 7926237

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Connected us! how social motives determine diy behaviorism in rural base of the pyramid communities

    Majumdar, P., Banerjee, S., Diehl, J. C. & Van Engelen, J. M. L., 2019, Research into Design for a Connected World - Proceedings of ICoRD 2019 Volume 1. Chakrabarti, A. (ed.). Springer Science and Business Media Deutschland GmbH, p. 807-819 13 p. (Smart Innovation, Systems and Technologies; vol. 134).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Consumer preferences and value proposition disconnect—Assam rattan and bamboo furniture industry

    Majumdar, P., Ji, S. & Banerjee, S., 2017, Research into Design for Communities : Proceedings of ICoRD 2017. Chakrabarti, A. & Chakrabarti, D. (eds.). Springer Singapore, Vol. 1. p. 665-677 13 p. (Smart Innovation, Systems and Technologies; vol. 65).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Designing of a semi-transparent Electroluminescent Umbrella

    Jansen, K., Claus, S. & Barati, B., 2017, Smart Systems Integration 2017: International Conference and Exhibition on Integration Issues of Miniaturized Systems. Otto, T. (ed.). Mesago Messe Frankfurt GmbH, p. 123-129 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Disposable, stretchable on-skin sensors for posture monitoring

    Jansen, K., Tarren, B. & Slingerland, M., 2018, WearSys 2018 : Proceedings of the 4th ACM Workshop on Wearable Systems and Applications. New York, NY: Association for Computing Machinery (ACM), p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Do-it-Yourself (DIY) Workspaces Run by Local Entrepreneurs that Transform Plastic Waste Into Valuable Water and Sanitation Products

    Diehl, J-C., Stroober, M., Majumdar, P. & Mink, A., 2018, 2018 IEEE Global Humanitarian Technology Conference (GHTC) . Piscataway, NJ: IEEE, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Five Kingdoms of DIY-Materials for Design

    Ayala-Garcia, C., Rognoli, V. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 222-234 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Functional Demonstrators to Support Understanding of Smart Materials

    Barati, B., Karana, E., Jansen, K. & Hekkert, P., 2016, TEI'16 Proceedings of the TEI'16: Tenth International Conference on Tangible, Embedded and Embodied Internaction. Broekhuijsen, M. (ed.). New York: Association for Computing Machinery (ACM), p. 386-391 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Growing materials for product design

    Camere, S. & Karana, E., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 101-115 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Materializing experiential visions into sensory properties: The use of the experience map

    Camere, S., Schifferstein, R. & Bordegoni, M., 2016, Proceedings of the Tenth International Conference on Design and Emotion - Celebration & Contemplation. Desmet, P. M. A., Fokkinga, S. F., Ludden, G. D. S., Cila, N. & Van Zuthem, H. (eds.). Amsterdam: The Design & Emotion Society, p. 201-210 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Modelling of Thermal Aging of Moulding Compound by using an Equivalent Layer Assumption

    Zhang, B., Lion, A., Johlitz, M., Ernst, L., Jansen, K., Vu, D-K. & Weiss, L., 2017, 2017 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017. IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Motivation for do-it-yourself in rural base of the pyramid communities and the changing landscape

    Majumdar, P., Banerjee, S., Diehl, J. C. & van Engelen, J. M. L., 2019, Research into Design for a Connected World - Proceedings of ICoRD 2019 Volume 2. Chakrabarti, A. (ed.). Springer Science and Business Media Deutschland GmbH, p. 611-625 15 p. (Smart Innovation, Systems and Technologies; vol. 135).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Radically Relational: Using Textiles As A Platform To Develop Methods For Embodied Design processes

    Petreca, B., Saito, C., Yu, X., Bianchi-Berthouze, N., Brown, A., Glancy, M. & Baurley, S., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 261-274 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Smart textiles: How electronics merge into our clothing

    Jansen, K. M. B., 2019, 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2019. Piscataway, NJ, USA: Institute of Electrical and Electronics Engineers Inc., 4 p. 8724586

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Smart thermoregulating garments

    Jansen, K. & Bogerd, N., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 359-363 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. The Plastic Bakery: A Case of Material Driven Design

    Majumdar, P., Karana, E., Ghazal, S. & Sonneveld, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 116-128 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. The Tuning of Materials: A Designer's Journey

    Karana, E., Giaccardi, E., Stamhuis, N. & Goossensen, J., 2016, DIS '16 Proceedings of the 2016 ACM Conference on Designing Interactive Systems. Foth, M. (ed.). New York: Association for Computing Machinery (ACM), p. 619-631 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. The making of performativity in designing [with] smart material composites

    Barati, B., Giaccardi, E. & Karana, E., 2018, CHI'18 Proceedings of the 2018 CHI Conference on Human Factors in Computing Systems. New York: Association for Computing Machinery (ACM), p. 1-11 11 p. 5

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Thermal aging modeling of molding compound under high-temperature storage and temperature cycling conditions

    Zhang, B., Johlitz, M., Lion, A., Ernst, L. J., Jansen, K., Vu, D-K. & Weiss, L., 2018, 2018 19th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2018. Piscataway, NJ: IEEE, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Traces as an Approach to Design for Focal Things and Practices

    Robbins, H., Giaccardi, E. & Karana, E., 2016, NordiCHI'16: Proceedings of the 9th Nordic Conference on Human-Computer Interaction. Björk, S. & Eriksson, E. (eds.). New York: Association for Computing Machinery (ACM), p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. What Does My Shirt Tell Me? The Integrating of Electronics in Clothing

    Jansen, K. M. B., 2019, 2019 Pan Pacific Microelectronics Symposium (Pan Pacific). Piscataway, NJ, USA: IEEE, p. 1-4 4 p. 8696601

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. ‘Experience Prototyping’ Smart Material Composites

    Barati, B., Karana, E. & Foole, M., 2017, Alive Active Adaptive: International Conference on Experiential Knowledge and Emerging Materials EKSIG 2017. Karana, E., Giaccardi, E., Nimkulrat, N., Niedderer, K. & Camere, S. (eds.). Delft: TU Delft Open, p. 50-65 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Conference contribution › Scientific › Not peer-reviewed
  49. Effects of automated tape laying heating strategies on degree of cure

    Skandali, M., Koussios, S., Sinke, J., Benedictus, R., de Mooij, C. & Jansen, K., 2017, SAMPE Europe Conference 16 Liege. New york: Curran Associates, Inc., p. 175-186 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Chapter › Scientific › Not peer-reviewed
  51. Giving Body to Digital Fashion Tools

    Petreca, B., 2017, Digital Bodies: Creativity and Technology in the Arts and Humanities. Broadhurst, S. & Price, S. (eds.). London: Palgrave MacMillan, p. 191-204 14 p. (Palgrave Studies in Performance and Technology).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  52. Materially yours

    Karana, E., Giaccardi, E. & Rognoli, V., 2017, Routledge Handbook of Sustainable Product Design. Chapman, J. (ed.). New York: Taylor & Francis, p. 206-221 16 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  53. Editorial › Scientific › Peer-reviewed
  54. Emerging material experiences

    Karana, E., Pedgley, O., Rognoli, V. & Korsunsky, A., 2016, In : Materials & Design. 90, p. 1248-1250 3 p.

    Research output: Contribution to journalEditorialScientificpeer-review

  55. Comment/Letter to the editor › Scientific › Peer-reviewed
  56. A comparison of the dynamic thermal sensation between the modified Stolwijk model and the Fiala thermal physiology and comfort (FPC) model

    Roelofsen, P., 2019, In : Intelligent Buildings International. 11 p.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  57. Article › Scientific › Peer-reviewed
  58. A new methodology for the evaluation of the perceived air quality depending on the air pollution, caused by human bioeffluents, the temperature, the humidity as well as the air velocity

    Roelofsen, P., 2018, In : Intelligent Buildings International. 10, 3, p. 154-161 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. A novel 12-lead electrocardiographic system for home use: Development and usability testing

    Steijlen, A., Jansen, K., Albayrak, A., Verschure, D. O. & Van Wijk, D. F., 2018, In : JMIR mHealth and uHealth. 6, 7, p. 1-14 14 p., e10126.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Atmospheric plasma modification of polyimide sheet for joining to titanium with high temperature adhesive

    Akram, M., Jansen, KMB., Ernst, LJ. & Bhowmik, S., 2016, In : International Journal of Adhesion and Adhesives. 65, p. 63-69

    Research output: Contribution to journalArticleScientificpeer-review

  61. Colour shift and mechanism investigation on the PMMA diffuser used in LED-based luminaires

    Lu, G., van Driel, WD., Fan, X., Yazdan Mehr, M., Fan, J., Qian, C., Jansen, KMB. & Zhang, GQ., 2016, In : Optical Materials. 54, p. 282-287 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 Next

ID: 23837