1. 2018
  2. Editorial: Material-Enabled Changes in Design Research and Practice

    Karana, E., Fisher, T., Kane, F. & Giaccardi, E., 2018, Proceedings of DRS 2018. Storni, C., Leahy, K., McMahon, M., Lloyd, P. & Bohemia, E. (eds.). London: Design Research Society, p. 1682-1684 3 p. (Proceedings of DRS; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingForeword/postscriptScientific

  3. Fabricating materials from living organisms: An emerging design practice

    Camere, S. & Karana, E., 2018, In : Journal of Cleaner Production. 186, p. 570-584 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. From Abstract to Tangible: Supporting the Materialization of Experiential Visions with the Experience Map

    Camere, S., Schifferstein, H. N. J. & Bordegoni, M., 2018, In : International Journal of Design. 12, 2, p. 51-73 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Hydrophobin gene deletion and environmental growth conditions impact mechanical properties of mycelium by affecting the density of the material

    Appels, F. V. W., Dijksterhuis, J., Lukasiewicz, C. E., Jansen, K., Wösten, H. A. B. & Krijgsheld, P., 2018, In : Scientific Reports. 8, 1, p. 1-7 7 p., 4703.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Reshaping touch communication: An interdisciplinary research agenda

    Price, S., Leder Mackley, K., Jewitt, C., Huisman, G., Petreca, B., Berthouze, N., Prattichizzo, D. & Hayward, V., 2018, p. 1-8. 8 p.

    Research output: Contribution to conferenceAbstractScientific

  7. Small-scale piped water supply: End-user inclusive water research in arsenic affected areas in India and Bangladesh (DELTAP)

    van Halem, D., Hoque, B. A., Ghosh, A. K., Donselaar, M. E., Karana, E., Bhattacharya, P. & Ahmed, K. M., 2018, p. 636-637. 2 p.

    Research output: Contribution to conferenceAbstractScientific

  8. The making of performativity in designing [with] smart material composites

    Barati, B., Giaccardi, E. & Karana, E., 2018, CHI'18 Proceedings of the 2018 CHI Conference on Human Factors in Computing Systems. New York: Association for Computing Machinery (ACM), p. 1-11 11 p. 5

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Thermal aging modeling of molding compound under high-temperature storage and temperature cycling conditions

    Zhang, B., Johlitz, M., Lion, A., Ernst, L. J., Jansen, K., Vu, D-K. & Weiss, L., 2018, 2018 19th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2018. Piscataway, NJ: IEEE, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Towards High Performance Metal–Organic Framework–Microporous Polymer Mixed Matrix Membranes: Addressing Compatibility and Limiting Aging by Polymer Doping

    Sabetghadam, A., Liu, X., Orsi, A. F., Lozinska, M. M., Johnson, T., Jansen, K., Wright, P. A., Carta, M., McKeown, N. B., Kapteijn, F. & Gascon, J., 2018, In : Chemistry - A European Journal. 24, 49, p. 12796-12800

    Research output: Contribution to journalArticleScientificpeer-review

  11. WearSys'2018 chairs' welcome

    Jansen, K. & Ashok, A., 2018, WearSys 2018 : Proceedings of the 4th ACM Workshop on Wearable Systems and Applications. Jansen, K. & Mortier, R. (eds.). p. ii

    Research output: Chapter in Book/Report/Conference proceedingForeword/postscriptScientific

  12. When the Material Grows: A Case Study on Designing (with) Mycelium-based Materials

    Karana, E., Blauwhoff, D., Hultink, E-J. & Camere, S., 2018, In : International Journal of Design. 12, 2, p. 119-136 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Proposal of characterization procedure of metal-graphite interface strength in compacted graphite iron

    Lopez-Covaleda, E. A., Ghodrat, S., Kestens, L. A. I., Sacre, C. H. & Pardoen, T., 7 Jul 2018, In : Materials. 11, 7, 12 p., 1159.

    Research output: Contribution to journalArticleScientificpeer-review

  14. 2019
  15. 3D Printed Actuators: Reversibility, Relaxation, and Ratcheting

    Zhao, S. C., Maas, M., Jansen, K. & van Hecke, M., 2019, In : Advanced Functional Materials. 29, 51, 8 p., 1905545.

    Research output: Contribution to journalArticleScientificpeer-review

  16. A comparison of the dynamic thermal sensation between the modified Stolwijk model and the Fiala thermal physiology and comfort (FPC) model

    Roelofsen, P., 2019, In : Intelligent Buildings International. 11 p.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  17. Affordances as materials potential: What design can do for materials development

    Barati, B. & Karana, E., 2019, In : International Journal of Design. 13, 3, p. 105-123 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Alive. Active. Adaptive: Experiential knowledge and emerging materials

    Karana, E., Nimkulrat, N., Giaccardi, E., Niedderer, K. & Fan, J. N., 2019, In : International Journal of Design. 13, 2, p. 1-5 5 p.

    Research output: Contribution to journalEditorialScientific

  19. Connected us! how social motives determine diy behaviorism in rural base of the pyramid communities

    Majumdar, P., Banerjee, S., Diehl, J. C. & Van Engelen, J. M. L., 2019, Research into Design for a Connected World - Proceedings of ICoRD 2019 Volume 1. Chakrabarti, A. (ed.). Springer, p. 807-819 13 p. (Smart Innovation, Systems and Technologies; vol. 134).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Design touch matters: Bending and stretching the potentials of smart material composites

    Barati, B., 2019, 176 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  21. Effects of surface modification on optical properties and thermal stability of K2SiF6:Mn4+ red phosphors by deposition of an ultrathin Al2O3 layer using gas-phase deposition in a fluidized bed reactor

    Ten Kate, O. M., Zhao, Y., Jansen, K. M. B., Ruud Van Ommen, J. & Hintzen, H. T., 2019, In : ECS Journal of Solid State Science and Technology. 8, 6, p. R88-R96

    Research output: Contribution to journalArticleScientificpeer-review

  22. Fabrication factors influencing mechanical, moisture- and water-related properties of mycelium-based composites

    Appels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P. & Wösten, H. A. B., 2019, In : Materials and Design. 161, p. 64-71 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. How to shape the future of smart clothing

    Jansen, K. M. B., 2019, UbiComp/ISWC 2019- - Adjunct Proceedings of the 2019 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2019 ACM International Symposium on Wearable Computers. Harle, R., Farrahi, K. & Lane, N. (eds.). New York, USA: Association for Computing Machinery (ACM), p. 1037-1039 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Location optimisation for IMUs in the design of motion tracking soccer tights based on Soft Tissue Artefact analysis

    Ahsmann, L., Steijlen, A., Wilmes, E., Jansen, K. & Huysmans, T., 2019. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  25. Motivation for do-it-yourself in rural base of the pyramid communities and the changing landscape

    Majumdar, P., Banerjee, S., Diehl, J. C. & van Engelen, J. M. L., 2019, Research into Design for a Connected World - Proceedings of ICoRD 2019 Volume 2. Chakrabarti, A. (ed.). Springer, p. 611-625 15 p. (Smart Innovation, Systems and Technologies; vol. 135).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Prototyping materials experience: Towards a shared understanding of underdeveloped smart material composites

    Barati, B., Karana, E. & Hekkert, P., 2019, In : International Journal of Design. 13, 2, p. 21-38 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Smart textiles: How electronics merge into our clothing

    Jansen, K. M. B., 2019, 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2019. Piscataway, NJ, USA: Institute of Electrical and Electronics Engineers (IEEE), 4 p. 8724586

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Thermo-Mechanical Fatigue Lifetime Assessment of Spheroidal Cast Iron at Different Thermal Constraint Levels

    Ghodrat, S., Kalra, A., Kestens, L. & Riemslag, T., 2019, In : Metals. 9, 10, 23 p., 1068.

    Research output: Contribution to journalArticleScientificpeer-review

  29. What Does My Shirt Tell Me? The Integrating of Electronics in Clothing

    Jansen, K. M. B., 2019, 2019 Pan Pacific Microelectronics Symposium (Pan Pacific). Piscataway, NJ, USA: IEEE, p. 1-4 4 p. 8696601

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Characterization of variable stiffness joints for adaptive structures

    Wang, Q., Habraken, A., Teuffel, P., Senatore, G. & Jansen, K., 1 Jan 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019. Zingoni, A. (ed.). CRC Press / Balkema, p. 1045-1050 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Creep behaviour of FM906 glass-fibre epoxy as used in heated fibre metal laminates

    Hagenbeek, M., Dias, M. M., Sinke, J. & Jansen, K., Nov 2019, In : Journal of Composite Materials. 53, 26-27, p. 3829-3840 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. 2020
  33. Design and characterization of variable stiffness structural joints

    Wang, Q., Senatore, G., Jansen, K., Habraken, A. & Teuffel, P., 2020, In : Materials and Design. 187, 108353.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Effect of temperature and humidity on moisture diffusion in an epoxy moulding compound material

    Jansen, K. M. B., Zhang, M. F., Ernst, L. J., Vu, D. K. & Weiss, L., 2020, In : Microelectronics Reliability. 107, 6 p., 113596.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Experiential characterization of materials in product design: A literature review

    Veelaert, L., Du Bois, E., Moons, I. & Karana, E., 2020, In : Materials and Design. 190, p. 16 108543.

    Research output: Contribution to journalReview articleScientificpeer-review

  36. Lifetime and damage characterization of compacted graphite iron during thermo-mechanical fatigue under varying constraint conditions

    Lopez-Covaleda, E. A., Ghodrat, S. & Kestens, L. A. I., 2020, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 1, p. 226-236 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 Next

ID: 23837