1. 2020
  2. Experimental investigation on FRP-reinforced surface cracked steel plates subjected to cyclic tension

    Li, Z., Jiang, X., Hopman, H., Zhu, L., Liu, Z. & Tang, W., 14 Apr 2020, In : Mechanics of Advanced Materials and Structures. 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Guidance Note Maneuvering of Fast ships in waves: Broaching-to

    Damala, D., Verbaas, F., Bonci, M., Akkerman, I. & Hopman, H., 22 Jan 2020, 18 p.

    Research output: Book/ReportReportProfessional

  4. An investigation on the circumferential surface crack growth in steel pipes subjected to fatigue bending

    Li, Z., Jiang, X., Hopman, H., Zhu, L. & Liu, Z., 2020, In : Theoretical and Applied Fracture Mechanics. 105, 14 p., 102403.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Assessing complex failure scenarios of on-board distributed systems using a Markov chain

    Habben Jansen, A., Duchateau, E. A. E., Kana, A. A. & Hopman, J. J., 2020, In : Journal of Marine Engineering and Technology. 19, Sup1, p. 45-61

    Research output: Contribution to journalArticleScientificpeer-review

  6. Cooperative multi-vessel systems in urban waterway networks

    Chen, L., Huang, Y., Zheng, H., Hopman, H. & Negenborn, R., 2020, In : IEEE Transactions on Intelligent Transportation Systems. 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Predicting the wet collapse pressure for flexible risers with initial ovalization and gap: An analytical solution

    Li, X., Jiang, X. & Hopman, H., 2020, In : Marine Structures. 71, 14 p., 102732.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Surface Crack Growth in Offshore Metallic Pipes under Cyclic Loads: A Literature Review

    Li, Z., Jiang, X. & Hopman, H., 2020, In : Journal of Marine Science and Engineering. 8, 5, 22 p., 339.

    Research output: Contribution to journalReview articleScientificpeer-review

  9. The heel-induced sway force and yaw moment of a high-speed craft in following regular waves

    Bonci, M., de Jong, P., van Walree, F., Renilson, M., Keuning, L. & van 't Veer, R., 2020, In : Journal of Marine Science and Technology. 25, 1, p. 312-325

    Research output: Contribution to journalArticleScientificpeer-review

  10. 2019
  11. A Markov-based vulnerability assessment for the design of on-board distributed systems in the concept phase

    Habben Jansen, A. C., Kana, A. A. & Hopman, J. J., 2019, In : Ocean Engineering. 190, 11 p., 106448.

    Research output: Contribution to journalArticleScientificpeer-review

  12. An analytical approach for predicting the collapse pressure of the flexible risers withinitial ovalization and gap

    Li, X., Jiang, X. & Hopman, H., 2019, Proceedings of the ASME 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019): Volume 5A: Pipelines, Risers, and Subsea Systems. New York, NY, USA: ASME, 8 p. OMAE2019-95642

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. Analysis of the influence of an interceptor on the transom flow of a fast ship by pressure reconstruction from stereoscopic scanning PIV

    Jacobi, G., Thill, C. H., van 't Veer, R. & Huijsmans, R. H. M., 2019, In : Ocean Engineering. 181, p. 281-292

    Research output: Contribution to journalArticleScientificpeer-review

  14. Distributed Model Predictive Control for cooperative floating object transport with multi-vessel systems

    Chen, L., Hopman, H. & Negenborn, R. R., 2019, In : Ocean Engineering. 191, 16 p., 106515.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Experiments on a Flettner rotor at critical and supercritical Reynolds numbers

    Bordogna, G., Muggiasca, S., Giappino, S., Belloli, M., Keuning, J. A., Huijsmans, R. H. M. & van ‘t Veer, A. P., 2019, In : Journal of Wind Engineering and Industrial Aerodynamics. 188, p. 19-29

    Research output: Contribution to journalArticleScientificpeer-review

  16. Fatigue design of welded double-sided T-joints and double-sided cruciform joints in steel marine structures: A total stress concept

    Qin, Y., den Besten, H., Palkar, S. & Kaminski, M. L., 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 12, p. 2674-2693 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Introducing operational information into early stage ship design using queueing networks

    Droste, K., Hopman, J. J., Kana, A. A. & van Oers, B. J., 2019, Proceedings of the 19th International Conference on Computer Applications in Shipbuilding, ICCAS 2019. Royal Institution of Naval Architects, Vol. 2.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  18. Joint estimation of vessel position and mooring stiffness during offshore crane operations

    Ye, J., Godjevac, M., Baldi, S. & Hopman, H., 2019, In : Automation in Construction. 101, p. 218-226 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Numerical analysis on the SIF of internal surface cracks in steel pipes reinforced with CRS subjected to bending

    Li, Z., Jiang, X. & Hopman, H., 2019, In : Ships and Offshore Structures. 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Numerical investigation on surface crack growth in steel plates repaired with carbon fiber-reinforced polymer

    Li, Z., Jiang, X. & Hopman, H., 2019, Proceedings of the ASME 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019): Volume 4: Materials Technology. New York, NY, USA: ASME, 8 p. OMAE2019-95746

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  21. Observer-based robust control for dynamic positioning of large-scale heavy lift vessels

    Ye, J., Roy, S., Godjevac, M. & Baldi, S., 2019, In : IFAC-PapersOnLine. 52, 3, p. 138-143

    Research output: Contribution to journalConference articleScientificpeer-review

  22. Optimizing inventory strategy for modular shipbuilding

    van der Beek, T., van Essen, T., Pruijn, J., Aardal, K. & Hopman, H., 2019, 19th International Conference on Computer Applications in Shipbuilding (ICCAS 2019). Royal Institution of Naval Architects, p. 165-172

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  23. Semi-automated approach for detailed layout generation during early stage surface warship design

    le Poole, J., Hopman, J. J., Kana, A. A., Duchateau, E. A. E. & van Oers, B. J., 2019, Proceedings of the 19th International Conference on Computer Applications in Shipbuilding, ICCAS 2019. Royal Institution of Naval Architects, Vol. 2.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Wind-Tunnel Experiments on a Large-Scale Flettner Rotor

    Bordogna, G., Muggiasca, S., Giappino, S., Belloli, M., Keuning, J. A., Huijsmans, R. H. M. & van‘t Veer, A. P., 2019, Proceedings of the XV Conference of the Italian Association for Wind Engineering . Ricciardelli, F. & Avossa, A. M. (eds.). Springer, Vol. 27. p. 110-123 (Lecture Notes in Civil Engineering; vol. 27).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  25. 2018
  26. A spring-supported arch model for predicting the hydrostatic collapse strength of flexible risers with layer gap

    Li, X., Jiang, X. & Hopman, H., 2018, Proceedings of the 32nd Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2018). p. 74-82

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  27. Efficient methodology of roll load prediction on 2D bodies in nonlinear flows

    Gadi, R., Huijsmans, R., Akkerman, I. & van 't Veer, R., 2018, Proceedings of the 33rd International Workshop on Water Waves and Floating Bodies (IWWWFB 2018). IWWWFB, 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  28. Haptic assistance to mitigate damaging vertical accelerations of small ships in head waves

    Kok, R., Vrijdag, A., van 't Veer, R. & Abbink, D., 2018, 25th International HISWA Symposium on Yacht Design and Yacht Construction: Back to the future (HISWA 2018). Amsterdam, The Netherlands: HISWA, 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  29. Numerical investigation of the SIFs of the external surface crack in rigid pipe reinforced with FRP

    Li, Z., Jiang, X. & Hopman, H., 2018, Proceedings of the 32nd Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2018). p. 1-6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  30. Validation of a deterministic wave and ship motion prediction system

    Naaijen, P., van Oosten, K., Roozen, K. & van 't Veer, R., 2018, Proceedings ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering: Volume 7B: Ocean Engineering. New York, NY, USA: ASME, 8 p. OMAE2018-78037

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  31. 2017
  32. A quantitative comparison of hybrid diesel-electric and gas-turbine-electric propulsion for future frigates

    Geertsma, R., Vollbrandt, J., Negenborn, R., Visser, K. & Hopman, H., 2017, Proceedings of the 2017 IEEE Electric Ship Technologies Symposium (ESTS). Sudhoff, S. & Pekarek, S. (eds.). Piscataway, NJ, USA: IEEE, p. 451-458

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  33. An integrated empirical manoeuvring model for inland vessels

    Liu, J., Hekkenberg, R., Quadvlieg, F., Hopman, H. & Zhao, B., 2017, In : Ocean Engineering. 137, p. 287-308

    Research output: Contribution to journalArticleScientificpeer-review

  34. Critical collapse pressure of flexible risers in deep/ ultra-deep water: a literature review

    Li, X., Jiang, X. & Hopman, H., 2017, Proceedings of the 22th International Conference on Material Handling, Construction and Logistics (MHCL’17). Belgrade, Serbia: FME Belgrade, 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  35. Design and control of hybrid power and propulsion systems for smart ships: A review of developments

    Geertsma, R. D., Negenborn, R. R., Visser, K. & Hopman, J. J., 2017, In : Applied Energy. 194, p. 30-54

    Research output: Contribution to journalReview articleScientificpeer-review

  36. Hydrodynamic characteristics of multiple-rudder configurations

    Liu, J., Hekkenberg, R., Rotteveel, E. & Hopman, H., 2017, In : Ships and Offshore Structures. 12, 6, p. 818 - 836

    Research output: Contribution to journalArticleScientificpeer-review

  37. Knowledge framework on the execution of complex projects: The development of a functional framework using a systems approach

    Wiskerke, J., Veeke, H., Pruijn, J., Groen, C. & Hopman, H., 2017, Proceedings of the International Conference on Information and Knowledge Engineering (IKE 16) (2016 Worldcomp International Conference Proceedings). Arabnia, H. R., Deligiannidis, L., Hashemi, R. R., Jandieri, G., Solo, A. M. G. & Tinetti, F. G. (eds.). CSREA, p. 73-78

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  38. Parallel control for hybrid propulsion of multifunction ships

    Geertsma, R. D., Negenborn, R. R., Visser, K. & Hopman, J. J., 2017, In : IFAC-PapersOnLine. 50, 1, p. 2296-2303

    Research output: Contribution to journalConference articleScientificpeer-review

  39. Pitch control for ships with diesel mechanical and hybrid propulsion: Modelling, validation and performance quantification

    Geertsma, R. D., Negenborn, R. R., Visser, K., Loonstijn, M. A. & Hopman, J. J., 2017, In : Applied Energy. 206, p. 1609-1631

    Research output: Contribution to journalArticleScientificpeer-review

  40. Position control of crane vessel during offshore installations: Using adaptive and robust control methods

    Ye, J., Godjevac, M. & El Amam, E., 2017, Proceedings of the 2017 21st International Conference on System Theory, Control and Computing (ICSTCC 2017). Kloetzer, M. & Ferariu, L. (eds.). Piscataway, NJ, USA: IEEE, p. 17-22 8107005

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  41. Strategic guidance based on the concept of cleaner production to improve the ship recycling industry

    Jain, K. P., Pruyn, J. & Hopman, H., 2017, In : Environment Systems and Decisions. 38 (2018), 2, p. 250-260

    Research output: Contribution to journalArticleScientificpeer-review

  42. 2016
  43. Torque control for diesel mechanical and hybrid propulsion on naval vessels

    Geertsma, R., Negenborn, R., Visser, K. & Hopman, H., 2016, Proceedings of the 13th International Naval Engineering Conference and Exhibition 2016: INEC 2016. London, UK: IMarEST, p. 476-492

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

ID: 18601