1. 2020
  2. A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition Modeling

    Kuipers, T., Doubrovski, E. L., Wu, J. & Wang, C. C. L., 2020, In : CAD Computer Aided Design. 128, p. 1-15 15 p., 102907.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Bonding between silicones and thermoplastics using 3D printed mechanical interlocking

    Rossing, L., Scharff, R. B. N., Chömpff, B., Wang, C. C. L. & Doubrovski, E. L., 2020, In : Materials and Design. 186, 12 p., 108254.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Dreaming of the Travelers’ Experience in 2040: Exploring Governance Strategies and Their Consequences for Personal Mobility Systems

    Veeneman, W., van Kuijk, J. & Hiemstra-van Mastrigt, S., 2020, Towards User-Centric Transport in Europe 2. Müller, B. & Meyer, G. (eds.). Springer, p. 225-239 17 p. (Lecture Notes in Mobility).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  5. Intelligent Optimal Feed-Back Torque Control of a 6DOF Surgical Rotary Robot

    Tajdari, F., Toulkani, N. E. & Zhilakzadeh, N., 2020, 2020 11th Power Electronics, Drive Systems, and Technologies Conference, PEDSTC 2020. Institute of Electrical and Electronics Engineers (IEEE), 6 p. 9088382

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  6. Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing

    Mirzaali Mazandarani, M., Herranz de la Nava, A., Gunashekar, D., Nouri-Goushki, M., Veeger, R. P. E., Grossman, Q., Angeloni, L., Ghatkesar, M. K., Fratila-Apachitei, L. E., Ruffoni, D., Doubrovski, E. L. & Zadpoor, A. A., 2020, In : Composite Structures. 237, 10 p., 111867.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Multi‐material 3D printing of functionally graded hierarchical soft–hard composites

    Mirzaali Mazandarani, M., Cruz Saldivar, M., Herranz de la Nava, A., Gunashekar, D., Nouri Goushki, M., Doubrovski, Z. & Zadpoor, A., 2020, In : Advanced Engineering Materials. 22, 7, 8 p., 1901142.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Semi-Real Evaluation, and Adaptive Control of a 6DOF Surgical Robot

    Tajdari, F., Toulkani, N. E. & Zhilakzadeh, N., 2020, 2020 11th Power Electronics, Drive Systems, and Technologies Conference, PEDSTC 2020. Fathi, H. & Davari, A. (eds.). Institute of Electrical and Electronics Engineers (IEEE), 6 p. 9088405

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  9. Soft Robotic Module for Sensing and Controlling Contact Force

    Buso, A., Scharff, R. B. N., Doubrovski, E. L., Wu, J., Wang, C. C. L. & Vink, P., 2020, 2020 3rd IEEE International Conference on Soft Robotics, RoboSoft 2020. Kramer-Bottiglio, R., Tolley, M. & King, S. Y. (eds.). Piscataway, NJ, USA: Institute of Electrical and Electronics Engineers (IEEE), p. 70-75 6 p. 9115970. (2020 3rd IEEE International Conference on Soft Robotics, RoboSoft 2020).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  10. 2019
  11. Adaptable framework methodology for designing human-robot coproduction

    Çençen, A., 2019, 177 p.

    Research output: ThesisDissertation (TU Delft)

  12. Application of 3D scanning in design education

    Lee, W., Molenbroek, J., Goto, L., Jellema, A., Song, Y. & Goossens, R., 2019, DHM and Posturography. Scataglini, S. & Paul, G. (eds.). 1st ed. Academic Press, p. 721-731 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  13. Color-Based Proprioception of Soft Actuators Interacting with Objects

    Scharff, R. B. N., Doornbusch, R. M., Doubrovski, E. L., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2019, In : IEEE/ASME Transactions on Mechatronics. 24, 5, p. 1964-1973 10 p., 8766864.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Comparing Human Factors for Augmented Reality Supported Single-User and Collaborative Repair Operations of Industrial Robots

    Aschenbrenner, D., Leutert, F., Çençen, A., Verlinden, J., Schilling, K., Latoschik, M. & Lukosch, S., 2019, In : Frontiers Robotics AI. 6, MAY, p. 1-17 17 p., 37.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Comparison of three 3D scanning techniques for paintings, as applied to Vermeer’s ‘Girl with a Pearl Earring’

    Elkhuizen, W. S., Callewaert, T. W. J., Leonhardt, E., Vandivere, A., Song, Y., Pont, S. C., Geraedts, J. M. P. & Dik, J., 2019, In : Heritage Science. 7, 1, 22 p., 89.

    Research output: Contribution to journalArticleScientific

  16. Design of 3D Wireless Power Transfer System Based on 3D Printed Electronics

    Hou, T., Xu, J., Elkhuizen, W. S., Wang, C. C. L., Jiang, J., Geraedts, J. M. P. & Song, Y., 2019, In : IEEE Access. 7, p. 94793-94805 13 p., 8763967.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Designing aircraft seats to fit the human body contour

    Hiemstra-van Mastrigt, S., Smulders, M., Bouwens, J. & Vink, P., 2019, DHM and Posturography. Scataglini, S. & Paul, G. (eds.). 1st ed. Academic Press, p. 781-784 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

  18. Effects of a hand luggage guiding system on airplane boarding time and passenger experience

    Vendel, M., Dangal, S., Coppens, J., Hiemstra-van Mastrigt, S. & Vink, P., 2019, In : International Journal of Aviation, Aeronautics, and Aerospace. 6, 3, p. 1-25 25 p., 5.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Electronic assistive technology for community-dwelling solo-living older adults: A systematic review

    Song, Y. & van der Cammen, T. J. M., 2019, In : Maturitas. 125, p. 50-56 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Exploring the potential of additive manufacturing for product design in a circular economy

    Sauerwein, M., Doubrovski, E., Balkenende, R. & Bakker, C., 2019, In : Journal of Cleaner Production. 226, p. 1138-1149 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Fracture Behavior of Bio-Inspired Functionally Graded Soft–Hard Composites Made by Multi-Material 3D Printing: The Case of Colinear Cracks

    Mirzaali Mazandarani, M., Herranz de la Nava, A., Gunashekar, D., Nouri Goushki, M., Doubrovski, Z. & Zadpoor, A., 2019, In : Materials. 12, 17, 13 p., 2735.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Future vehicles: the effect of seat configuration on posture and quality of conversation

    Fiorillo, I., Piro, S., Anjani, S., Smulders, M., Song, Y., Naddeo, A. & Vink, P., 2019, In : Ergonomics. 62, 11, p. 1400-1414 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Gloss, Color and Topography Scanning for Reproducing a Painting’s Appearance using 3D printing

    Elkhuizen, W., Essers, T., Song, Y., Geraedts, J., Weijkamp, C., Dik, J. & Pont, S., 2019, In : Journal on Computing and Cultural Heritage. 12, 4, 22 p., 27.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Identifying bottlenecks and designing ideas and solutions for improving aircraft passengers’ experience during boarding and disembarking

    Hiemstra-Van Mastrigt, S., Ottens, R. & Vink, P., 2019, In : Applied Ergonomics. 77, p. 16-21 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Monocular Image Based 3D Model Retrieval

    Li, W., Liu, A., Nie, W., Song, D., Li, Y., Doubrovski, Z., Geraedts, J., Liu, Z., Ma, Y. & More Authors, 2019, Eurographics Workshop on 3D Object Retrieval. Biasotti, S. & Lavoué, G. (eds.). The Eurographics Association, p. 103-110 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  26. Neck posture and muscle activity in a reclined business class aircraft seat watching IFE with and without head support

    Smulders, M., Naddeo, A., Cappetti, N., van Grondelle, E. D., Schultheis, U. & Vink, P., 2019, In : Applied Ergonomics. 79, p. 25-37 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Optimal camera configuration for 3D scanning of human hand

    Yang, Y., Elkhuizen, W. S., Hou, T., Essers, T. T. W. & Song, Y., 2019, 39th Computers and Information in Engineering Conference. Tang, J. & Zuo, L. (eds.). ASME, Vol. 1. 8 p. DETC2019-97784

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  28. Reducing out-of-plane deformation of soft robotic actuators for stable grasping

    Scharff, R. B. N., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2019, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). Danvers: IEEE, p. 265-270 6 p. 8722823

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. Safeguarding Syrian archaeological Heritage: humanities and natural sciences

    Nieuwenhuyse, O., Hiatlih, K., Hakki, R., al-Fakhri, A., Ngan-Tillard, D., Verlinden, J., Lambers, K., Buch, K. & Mara, H., 2019.

    Research output: Contribution to conferenceAbstractScientific

  30. Sensitivity of the foot in the flat and toe off positions

    Buso, A. & Shitoot, N., 2019, In : Applied Ergonomics. 76, p. 57-63 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Studying a new embarking and disembarking process for future hyperloop passengers

    Li, D., van der Vegte, W. F., Geuze, M., van der Meijs, M. & Hiemstra-van Mastrigt, S., 2019, Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018) - Volume VI: Transport Ergonomics and Human Factors TEHF, Aerospace Human Factors and Ergonomics. Bagnara, S., Tartaglia, R., Albolino, S., Alexander, T. & Fujita, Y. (eds.). Cham: Springer, Vol. VI. p. 217-229 13 p. (Advances in Intelligent Systems and Computing; vol. 823).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  32. The Effect of Light Projections for Wayfinding Purposes within an Airport Context

    Tezcan, P. & Hiemstra-van Mastrigt, S., 2019, In : Journal of Navigation. 72, 5, p. 1200-1216 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. This is not a painting: Scanning and printing a painting's appearance

    Elkhuizen, W., 2019, 202 p.

    Research output: ThesisDissertation (TU Delft)

  34. Towards comfortable communication in future vehicles

    Piro, S., Fiorillo, I., Anjani, S., Smulders, M., Naddeo, A. & Vink, P., 2019, In : Applied Ergonomics. 78, p. 210-216 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. 2018
  36. Collaborative Production Line Planning with Augmented Fabrication

    Aschenbrenner, D., Li, M., Dukalski, R., Verlinden, J. & Lukosch, S., 24 Aug 2018, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, VR 2018 - Proceedings. Institute of Electrical and Electronics Engineers (IEEE), p. 509-510 2 p. 8446533

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  37. 3D wireless power transfer based on 3D printed electronics

    Hou, T., Song, Y., Elkhuizen, W., Jiang, J. & Geraedts, J., 2018, 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE). Reveliotis, S. (ed.). IEEE, p. 499-505 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  38. A landmark-based 3D parametric foot model for footwear customisation

    Song, Y., Hoeksema, J., Ramkumar, A. & Molenbroek, J. F. M., 2018, In : International Journal of the Digital Human. 2, 1-2, p. 115-128 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Color-Based Sensing of Bending Deformation on Soft Robots

    Scharff, R., Doornbusch, R. M., Klootwijk, X. L., Doshi, A. A., Doubrovski, E. L., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2018, 2018 IEEE International Conference on Robotics and Automation (ICRA). Lynch, K. (ed.). 978-1-5386-3082-2 : IEEE, p. 4181-4187 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  40. Comparing Different Augmented Reality Support Applications for Cooperative Repair of an Industrial Robot

    Aschenbrenner, D., Rojkov, M., Leutert, F., Verlinden, J., Lukosch, S., Latoschik, M. E. & Schilling, K., 2018, Proceedings of International Symposium for Mixed and Augmented Reality 2018. IEEE, p. 69-74

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  41. Design Methodology to Improve Human-Robot Coproduction in Small and Medium Sized Enterprises

    Çençen, A., Verlinden, J. & Geraedts, J., 2018, In : IEEE/ASME Transactions on Mechatronics. 23, 3, p. 1092-1102 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Design of a novel three- dimensional-printed two degrees-of-freedom steerable electrosurgical grasper for minimally invasive surgery

    Sakes, A., Hovland, K., Smit, G., Geraedts, J. & Breedveld, P., 2018, In : Journal of Medical Devices. 12, 1, 15 p., 011007.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Development of a high resolution topography and color scanner to capture crack patterns of paintings

    van Hengstum, M. J. W., Essers, T. T. W., Elkhuizen, W. S., Dodou, D., Song, Y., Geraedts, J. M. P. & Dik, J., 2018, GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage. Sablatnig, R. & Wimmer, M. (eds.). The Eurographics Association, p. 11-20 10 p. (GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  44. Digital Manufacturing of Fine Art Reproductions for Appearance

    Elkhuizen, W. S., Doubrovski, E. L., van Apeldoorn, N., Essers, T. T. W. & Geraedts, J. P. M., 2018, p. 1-1. 1 p.

    Research output: Contribution to conferencePosterScientific

  45. Effect of in-seat exercising on comfort perception of airplane passengers

    Bouwens, J., Fasulo, L., Hiemstra-van Mastrigt, S., Schultheis, U., Naddeo, A. & Vink, P., 2018, In : Applied Ergonomics. 73, p. 7-12 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Eye-tracking to differentiate viewing behavior of surgeons and trainees during laparoscopic pancreatoduodenectomy

    Brinkman, D., van der Vliet, W., Besselink, M., Busch, O., van Dam, R., Festen, S., de Hingh, I., Lips, D., Song, Y. & Luyer, M., 2018, In : HPB. 20, Supplement 2, p. S650-S650 1 p.

    Research output: Contribution to journalMeeting AbstractScientific

  47. Gloss Calibration and Gloss Gamut Mapping for Material Appearance Reproduction of Paintings

    Elkhuizen, W. S., Essers, T. T. W., Song, Y., Geraedts, J. M. P., Pont, S. C. & Dik, J., 2018, GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage. Sablatnig, R. & Wimmer, M. (eds.). The Eurographics Association, p. 161-164 4 p. (GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  48. Guest Editorial Focused Section on Sensing and Perception Systems for Intelligent Manufacturing (SPIM)

    Chen, X., Zhang, S. & Geraedts, J., 2018, In : IEEE/ASME Transactions on Mechatronics. 23, 3, p. 983-985 3 p.

    Research output: Contribution to journalEditorialScientificpeer-review

  49. Hatching for 3D prints: Line-based halftoning for dual extrusion fused deposition modeling

    Kuipers, T., Elkhuizen, W., Verlinden, J. & Doubrovski, E., 2018, In : Computers & Graphics. 74, p. 23-32 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Length-scale dependency of biomimetic hard-soft composites

    Mirzaali Mazandarani, M., Edens, M. E., de la Nava, A. H., Janbaz, S., Vena, P., Doubrovski, E. L. & Zadpoor, A. A., 2018, In : Scientific Reports. 8, 1, 8 p., 12052.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Local and recyclable materials for additive manufacturing: 3D printing with mussel shells

    Sauerwein, M. & Doubrovski, Z., 2018, In : Materials Today Communications. 15, p. 214-217 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Mussels in the 3D printer

    Sauerwein, M., Vette, J. & Doubrovski, Z., 2018

    Research output: Non-textual formExhibitionScientific

  53. Nanostructure and microstructure fabrication: From desired properties to suitable processes

    van Assenbergh, P., Meinders, E., Geraedts, J. & Dodou, D., 2018, In : Small. 14, 20, 24 p., 1703401.

    Research output: Contribution to journalReview articleScientificpeer-review

  54. Ranking of Human Senses in Relation to Different In-flight Activities Contributing to the Comfort Experience of Airplane Passengers

    Bouwens, J., Hiemstra-van Mastrigt, S. & Vink, P., 2018, In : International Journal of Aviation, Aeronautics, and Aerospace. 5, 2, p. 1-14 14 p., 9.

    Research output: Contribution to journalArticleScientificpeer-review

  55. 2017
  56. Incorporating sensemaking perspective in design: Supporting physicians during the contouring tasks in radiotherapy

    Aselmaa, A., Dec 2017, 243 p.

    Research output: ThesisDissertation (TU Delft)

  57. 3D Hatching: Linear halftoning for dual extrusion fused deposition modeling

    Kuipers, T., Doubrovski, Z. & Verlinden, J., 2017, SCF' 17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-7 7 p. a2

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  58. 3D Printed Electronics: Opportunities and Challenges from case studies

    Song, Y., Boekraad, R., Roussos, L., Kooijman, A., Wang, C. & Geraedts, J., 2017, Proceedings of ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE 2017: 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers, Vol. 1. p. 1-11 11 p. DETC2017-67503

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  59. Comfort and discomfort effects over time: the sweetness of discomfort and the pleasure towards of the end

    Vink, P., Anjani, S., Smulders, M. & Hiemstra-van Mastrigt, S., 2017, Proceedings of 1st International Comfort Congress. Salerno, Italy, 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  60. Design and development of an intelligent nursing bed: A pilot project of 'joint assignment'

    Jiang, J., Liu, T., Zhang, Y., Song, Y., Zhou, M., Zheng, X. & Yan, Z., 2017, 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society ( EMBC): Proceedings. Institute of Electrical and Electronics Engineers (IEEE), p. 38-41 4 p. 8036757

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  61. Exhibition of a set of designs at the Mind the step

    Wu, J., Doubrovski, Z., Garner, E. & Lin, T., 2017

    Research output: Non-textual formExhibitionScientific

  62. Growing Seasons, 3D printing mycelium-base materials

    Camere, S., Doubrovski, Z. & Sauerwein, M., 2017

    Research output: Non-textual formExhibitionScientific

  63. Human Factors in de luchtvaart

    Hiemstra-van Mastrigt, S. (Guest ed.), 2017, In : Tijdschrift voor Human Factors. 42, 4, p. 4-5 2 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  64. Portable Rapid Visual Workflow Simulation Tool for Human Robot Coproduction

    Dukalski, R., Çençen, A., Aschenbrenner, D. & Verlinden, J., 2017, In : Procedia Manufacturing. 11, p. 185-197 13 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  65. Reproduction of gloss, color and relief of paintings using 3D scanning and 3D printing

    Elkhuizen, W., Essers, T., Lenseigne, B., Weijkamp, C., Song, Y., Pont, S., Geraedts, J. & Dik, J., 2017, Proceedings 2017 Eurographics Workshop on Graphics and Cultural Heritage. Schreck, T., Weyrich, T., Sablatnig, R. & Stular, B. (eds.). The Eurographics Association, p. 183-187 5 p. (GCH 2017 - Eurographics Workshop on Graphics and Cultural Heritage).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  66. ShowHow: A Flexible, Structured Approach to Commit University Stakeholders to Sustainable Development

    Verhoef, L., Graamans, L., Gioutsos, D., van Wijk, A., Geraedts, J. & Hellinga, C., 2017, Handbook of Theory and Practice of Sustainable Development in Higher Education. Leal Filho, W., Azeiteiro, U. M., Alves, F. & Molthan-Hill, P. (eds.). Springer, Vol. 4. p. 491-508 (World Sustainability Series).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  67. Sneller en comfortabeler instappen: Oplossingen voor het verbeteren van de passagierservaring tijdens boarding

    Hiemstra-van Mastrigt, S., Ottens, R. & Vink, P., 2017, In : Tijdschrift voor Human Factors. 42, 4, p. 10-14 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Suited for performance: Fast full-scale replication of athlete with FDM

    van Tubergen, J., Verlinden, J., Stroober, M. & Baldewsing, R., 2017, SCF'17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-2 2 p. a17

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  69. The influence of automation on tumor contouring

    Aselmaa, A., van Herk, M., Song, Y., Goossens, R. H. M. & Laprie, A., 2017, In : Cognition, Technology and Work. 19, 4, p. 795-808 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Towards behavior design of a 3D-printed soft robotic hand

    Scharff, R., Doubrovski, Z., Poelman, W., Jonker, P., Wang, C. & Geraedts, J., 2017, Soft Robotics: Trends, Applications and Challenges. Laschi, C., Rossiter, J., Lida, F., Cianchetti, M. & Margheri, L. (eds.). Springer, Vol. 17. p. 23-29 7 p. (Biosystems and Biorobotics).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  71. Using GOMS and NASA-TLX to Evaluate Human-Computer Interaction Process in Interactive Segmentation

    Ramkumar, A., Stappers, P. J., Niessen, W., Adebahr, S., Schimek-Jasch, T., Nestle, U. & Song, Y., 2017, In : International Journal of Human-Computer Interaction. 33, 2, p. 123-134 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Using a contextualized sensemaking model for interaction design: A case study of tumor contouring

    Aselmaa, A., van Herk, M., Laprie, A., Nestle, U., Götz, I., Wiedenmann, N., Schimek-Jasch, T., Picaud, F., Syrykh, C., Cagetti, L., Jolnerovski, M., Song, Y. & Goossens, R., 2017, In : Journal of Biomedical Informatics. 65, p. 145-158 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. 2016
  74. A 3D printed reconstructing of a painting’s original size: Showing the original size of Saul and David by Rembrandt

    Elkhuizen, W., Lenseigne, B., Weijkamp, C., Pont, S., Geraedts, J. & Dik, J., 2016.

    Research output: Contribution to conferencePosterScientific

  75. Design issues of the existing radiotherapy segmentation software

    Ramkumar, A., Song, Y., Niessen, W. & Stappers, P. J., 2016, In : International Symposium of Human Factors and Ergonomics in Healthcare. Proceedings. 5, 1, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Incorporating Priori Structure Knowledge in Level Set Method-Based Algorithm for 11C-Pittsburgh Compound B Positron Emission Tomography Segmentation

    Shu, X., Jiang, J., Song, Y., Huang, Z., Guan, Y. & Yan, Z., 2016, In : Journal of Medical Imaging and Health Informatics. 6, 4, p. 968-977 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Investigating the links between the process parameters and their influence on the aesthetic evaluation of selective laser melted parts

    Galimberti, G., Doubrovski, Z., Guagliano, M., Previtali, B. & Verlinden, J., 2016, Solid Freeform Fabrication 2016: Proceedings of the 27th International Solid Freefrom Fabrication Symposium. Bourell, D. L., Crawford, R. H., Seepersad, C. C., Beaman, J. J., Fish, S. & Marcus, H. (eds.). Laboratory for Freeform Fabrication and University of Texas at Austin, p. 2367-2386 20 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  78. Making 3D Fine Art reproductions shine: Capturing and printing spatially varying gloss of a painting

    Elkhuizen, W., Lenseigne, B., Weijkamp, C., Pont, S., Geraedts, J. & Dik, J., 2016.

    Research output: Contribution to conferencePosterScientific

  79. Qualifying the performance of human-robot coproduction at a relabeling station

    Çençen, A., Verlinden, J. & Geraedts, J., 2016, Proceedings of the TMCE 2016. Horvath, I., Pernot, J-P. & Rusák, Z. (eds.). Organizing Committee of TMCE 2016, p. 1-11 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  80. SmartFrame: Interactive exposition setup for 3D printed reproductions

    Elkhuizen, W., Pont, S., Geraedts, J., Baay, M. & Peeters, B., 2016

    Research output: Non-textual formExhibitionScientific

  81. User interaction visualization for design synthesis

    Aselmaa, A., Song, Y. & Goossens, R., 2016, p. 5-7. 3 p.

    Research output: Contribution to conferencePosterScientific

  82. 2015
  83. Supporting optimization of complex product development processes through simulation: A case-study of thick film heaters development processes

    Opiyo, E., Song, Y., Dorhout, H. & Kloppers, G., 2015, Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2015. ASME, Vol. 1A. p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  84. 2014
  85. Exploring human robot coproduction

    Cencen, A., Van Deurzen, K., Verlinden, J. C. & Geraedts, J. M. P., 2014, 19th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2014. Martinez Garcia, H. & Grau, A. (eds.). Institute of Electrical and Electronics Engineers (IEEE), 7005329

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  86. Medical Factors of Brain Tumor Delineation in Radiotherapy for Software Design

    Aselmaa, A., Goossens, R., Rowland, B., Laprie, A., Song, Y. & Freudenthal, A., 2014, Proceedings of the 5th International Conference on Applied Human Factors and Ergonomics AHFE 2014. Ahram, T., Karwowski, W. & Marek, T. (eds.). p. 4865-4875 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  87. 1985
  88. Orientational hole burning for dimers in the limit of large rotational quantum numbers

    Snels, M., Geraedts, J., Stolte, S. & Reuss, J., 15 Mar 1985, In : Chemical Physics. 94, 1-2, p. 1-6 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. 1984
  90. Infrared predissociation of SiF4 and CF3Br clusters in a molecular-beam experiment

    Geraedts, J., Snels, M. N. N., Stolte, S. & Reuss, J., 4 May 1984, In : Chemical Physics Letters. 106, 5, p. 377-381 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. 1983
  92. IR dimer spectroscopy and Fermi resonance

    Geraedts, J., Stolte, S. & Reuss, J., 13 May 1983, In : Chemical Physics Letters. 97, 2, p. 152-154 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. 1982
  94. Dimer spectroscopy

    Geraedts, J., Waayer, M., Stolte, S. & Reuss, J., 1 Dec 1982, In : Faraday Discussions of the Chemical Society. 73, p. 375-386 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Vibrational predissociation of SF6 dimers and trimers

    Geraedts, J., Stolte, S. & Reuss, J., 1 Jun 1982, In : Zeitschrift für Physik A Atoms and Nuclei. 304, 2, p. 167-175 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. General discussion

    Connor, J. N. L., Halberstadt, N., Ewing, G. E., Balint-Kurti, G. G., Kidd, I. F., Hutson, J. M., Beswick, J. A., Delgado-Barrio, G., Villareal, P., Mareca, P., Smith, I. W. M., Jouvet, C., Schaefer, J., Burton, P. G., Gough, T. E., Keil, M., Knight, D. G., Scoles, G., Geraedts, J., Jortner, J. & 4 others, Castleman, A. W., Kay, B. D., Schelling, F. J. & Sievert, R., 1 Jan 1982, In : Faraday Discussions of the Chemical Society. 73, p. 399-421 23 p.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

ID: 23727