1. 2020
  2. A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition Modeling

    Kuipers, T., Doubrovski, E. L., Wu, J. & Wang, C. C. L., 2020, In : CAD Computer Aided Design. 128, p. 1-15 15 p., 102907.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Bonding between silicones and thermoplastics using 3D printed mechanical interlocking

    Rossing, L., Scharff, R. B. N., Chömpff, B., Wang, C. C. L. & Doubrovski, E. L., 2020, In : Materials and Design. 186, 12 p., 108254.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Dreaming of the Travelers’ Experience in 2040: Exploring Governance Strategies and Their Consequences for Personal Mobility Systems

    Veeneman, W., van Kuijk, J. & Hiemstra-van Mastrigt, S., 2020, Towards User-Centric Transport in Europe 2. Müller, B. & Meyer, G. (eds.). Springer, p. 225-239 17 p. (Lecture Notes in Mobility).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  5. Intelligent Optimal Feed-Back Torque Control of a 6DOF Surgical Rotary Robot

    Tajdari, F., Toulkani, N. E. & Zhilakzadeh, N., 2020, 2020 11th Power Electronics, Drive Systems, and Technologies Conference, PEDSTC 2020. Institute of Electrical and Electronics Engineers (IEEE), 6 p. 9088382

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  6. Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing

    Mirzaali Mazandarani, M., Herranz de la Nava, A., Gunashekar, D., Nouri-Goushki, M., Veeger, R. P. E., Grossman, Q., Angeloni, L., Ghatkesar, M. K., Fratila-Apachitei, L. E., Ruffoni, D., Doubrovski, E. L. & Zadpoor, A. A., 2020, In : Composite Structures. 237, 10 p., 111867.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Multi‐material 3D printing of functionally graded hierarchical soft–hard composites

    Mirzaali Mazandarani, M., Cruz Saldivar, M., Herranz de la Nava, A., Gunashekar, D., Nouri Goushki, M., Doubrovski, Z. & Zadpoor, A., 2020, In : Advanced Engineering Materials. 22, 7, 8 p., 1901142.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Semi-Real Evaluation, and Adaptive Control of a 6DOF Surgical Robot

    Tajdari, F., Toulkani, N. E. & Zhilakzadeh, N., 2020, 2020 11th Power Electronics, Drive Systems, and Technologies Conference, PEDSTC 2020. Fathi, H. & Davari, A. (eds.). Institute of Electrical and Electronics Engineers (IEEE), 6 p. 9088405

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  9. Soft Robotic Module for Sensing and Controlling Contact Force

    Buso, A., Scharff, R. B. N., Doubrovski, E. L., Wu, J., Wang, C. C. L. & Vink, P., 2020, 2020 3rd IEEE International Conference on Soft Robotics, RoboSoft 2020. Kramer-Bottiglio, R., Tolley, M. & King, S. Y. (eds.). Piscataway, NJ, USA: Institute of Electrical and Electronics Engineers (IEEE), p. 70-75 6 p. 9115970. (2020 3rd IEEE International Conference on Soft Robotics, RoboSoft 2020).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  10. 2019
  11. Adaptable framework methodology for designing human-robot coproduction

    Çençen, A., 2019, 177 p.

    Research output: ThesisDissertation (TU Delft)

  12. Application of 3D scanning in design education

    Lee, W., Molenbroek, J., Goto, L., Jellema, A., Song, Y. & Goossens, R., 2019, DHM and Posturography. Scataglini, S. & Paul, G. (eds.). 1st ed. Academic Press, p. 721-731 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  13. Color-Based Proprioception of Soft Actuators Interacting with Objects

    Scharff, R. B. N., Doornbusch, R. M., Doubrovski, E. L., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2019, In : IEEE/ASME Transactions on Mechatronics. 24, 5, p. 1964-1973 10 p., 8766864.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Comparing Human Factors for Augmented Reality Supported Single-User and Collaborative Repair Operations of Industrial Robots

    Aschenbrenner, D., Leutert, F., Çençen, A., Verlinden, J., Schilling, K., Latoschik, M. & Lukosch, S., 2019, In : Frontiers Robotics AI. 6, MAY, p. 1-17 17 p., 37.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Comparison of three 3D scanning techniques for paintings, as applied to Vermeer’s ‘Girl with a Pearl Earring’

    Elkhuizen, W. S., Callewaert, T. W. J., Leonhardt, E., Vandivere, A., Song, Y., Pont, S. C., Geraedts, J. M. P. & Dik, J., 2019, In : Heritage Science. 7, 1, 22 p., 89.

    Research output: Contribution to journalArticleScientific

  16. Design of 3D Wireless Power Transfer System Based on 3D Printed Electronics

    Hou, T., Xu, J., Elkhuizen, W. S., Wang, C. C. L., Jiang, J., Geraedts, J. M. P. & Song, Y., 2019, In : IEEE Access. 7, p. 94793-94805 13 p., 8763967.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Designing aircraft seats to fit the human body contour

    Hiemstra-van Mastrigt, S., Smulders, M., Bouwens, J. & Vink, P., 2019, DHM and Posturography. Scataglini, S. & Paul, G. (eds.). 1st ed. Academic Press, p. 781-784 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

  18. Effects of a hand luggage guiding system on airplane boarding time and passenger experience

    Vendel, M., Dangal, S., Coppens, J., Hiemstra-van Mastrigt, S. & Vink, P., 2019, In : International Journal of Aviation, Aeronautics, and Aerospace. 6, 3, p. 1-25 25 p., 5.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Electronic assistive technology for community-dwelling solo-living older adults: A systematic review

    Song, Y. & van der Cammen, T. J. M., 2019, In : Maturitas. 125, p. 50-56 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Exploring the potential of additive manufacturing for product design in a circular economy

    Sauerwein, M., Doubrovski, E., Balkenende, R. & Bakker, C., 2019, In : Journal of Cleaner Production. 226, p. 1138-1149 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Fracture Behavior of Bio-Inspired Functionally Graded Soft–Hard Composites Made by Multi-Material 3D Printing: The Case of Colinear Cracks

    Mirzaali Mazandarani, M., Herranz de la Nava, A., Gunashekar, D., Nouri Goushki, M., Doubrovski, Z. & Zadpoor, A., 2019, In : Materials. 12, 17, 13 p., 2735.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Future vehicles: the effect of seat configuration on posture and quality of conversation

    Fiorillo, I., Piro, S., Anjani, S., Smulders, M., Song, Y., Naddeo, A. & Vink, P., 2019, In : Ergonomics. 62, 11, p. 1400-1414 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Gloss, Color and Topography Scanning for Reproducing a Painting’s Appearance using 3D printing

    Elkhuizen, W., Essers, T., Song, Y., Geraedts, J., Weijkamp, C., Dik, J. & Pont, S., 2019, In : Journal on Computing and Cultural Heritage. 12, 4, 22 p., 27.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Identifying bottlenecks and designing ideas and solutions for improving aircraft passengers’ experience during boarding and disembarking

    Hiemstra-Van Mastrigt, S., Ottens, R. & Vink, P., 2019, In : Applied Ergonomics. 77, p. 16-21 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Monocular Image Based 3D Model Retrieval

    Li, W., Liu, A., Nie, W., Song, D., Li, Y., Doubrovski, Z., Geraedts, J., Liu, Z., Ma, Y. & More Authors, 2019, Eurographics Workshop on 3D Object Retrieval. Biasotti, S. & Lavoué, G. (eds.). The Eurographics Association, p. 103-110 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  26. Neck posture and muscle activity in a reclined business class aircraft seat watching IFE with and without head support

    Smulders, M., Naddeo, A., Cappetti, N., van Grondelle, E. D., Schultheis, U. & Vink, P., 2019, In : Applied Ergonomics. 79, p. 25-37 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Optimal camera configuration for 3D scanning of human hand

    Yang, Y., Elkhuizen, W. S., Hou, T., Essers, T. T. W. & Song, Y., 2019, 39th Computers and Information in Engineering Conference. Tang, J. & Zuo, L. (eds.). ASME, Vol. 1. 8 p. DETC2019-97784

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  28. Reducing out-of-plane deformation of soft robotic actuators for stable grasping

    Scharff, R. B. N., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2019, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). Danvers: IEEE, p. 265-270 6 p. 8722823

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. Safeguarding Syrian archaeological Heritage: humanities and natural sciences

    Nieuwenhuyse, O., Hiatlih, K., Hakki, R., al-Fakhri, A., Ngan-Tillard, D., Verlinden, J., Lambers, K., Buch, K. & Mara, H., 2019.

    Research output: Contribution to conferenceAbstractScientific

  30. Sensitivity of the foot in the flat and toe off positions

    Buso, A. & Shitoot, N., 2019, In : Applied Ergonomics. 76, p. 57-63 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Studying a new embarking and disembarking process for future hyperloop passengers

    Li, D., van der Vegte, W. F., Geuze, M., van der Meijs, M. & Hiemstra-van Mastrigt, S., 2019, Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018) - Volume VI: Transport Ergonomics and Human Factors TEHF, Aerospace Human Factors and Ergonomics. Bagnara, S., Tartaglia, R., Albolino, S., Alexander, T. & Fujita, Y. (eds.). Cham: Springer, Vol. VI. p. 217-229 13 p. (Advances in Intelligent Systems and Computing; vol. 823).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  32. The Effect of Light Projections for Wayfinding Purposes within an Airport Context

    Tezcan, P. & Hiemstra-van Mastrigt, S., 2019, In : Journal of Navigation. 72, 5, p. 1200-1216 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. This is not a painting: Scanning and printing a painting's appearance

    Elkhuizen, W., 2019, 202 p.

    Research output: ThesisDissertation (TU Delft)

  34. Towards comfortable communication in future vehicles

    Piro, S., Fiorillo, I., Anjani, S., Smulders, M., Naddeo, A. & Vink, P., 2019, In : Applied Ergonomics. 78, p. 210-216 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. 2018
  36. Collaborative Production Line Planning with Augmented Fabrication

    Aschenbrenner, D., Li, M., Dukalski, R., Verlinden, J. & Lukosch, S., 24 Aug 2018, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, VR 2018 - Proceedings. Institute of Electrical and Electronics Engineers (IEEE), p. 509-510 2 p. 8446533

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  37. 3D wireless power transfer based on 3D printed electronics

    Hou, T., Song, Y., Elkhuizen, W., Jiang, J. & Geraedts, J., 2018, 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE). Reveliotis, S. (ed.). IEEE, p. 499-505 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  38. A landmark-based 3D parametric foot model for footwear customisation

    Song, Y., Hoeksema, J., Ramkumar, A. & Molenbroek, J. F. M., 2018, In : International Journal of the Digital Human. 2, 1-2, p. 115-128 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Color-Based Sensing of Bending Deformation on Soft Robots

    Scharff, R., Doornbusch, R. M., Klootwijk, X. L., Doshi, A. A., Doubrovski, E. L., Wu, J., Geraedts, J. M. P. & Wang, C. C. L., 2018, 2018 IEEE International Conference on Robotics and Automation (ICRA). Lynch, K. (ed.). 978-1-5386-3082-2 : IEEE, p. 4181-4187 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  40. Comparing Different Augmented Reality Support Applications for Cooperative Repair of an Industrial Robot

    Aschenbrenner, D., Rojkov, M., Leutert, F., Verlinden, J., Lukosch, S., Latoschik, M. E. & Schilling, K., 2018, Proceedings of International Symposium for Mixed and Augmented Reality 2018. IEEE, p. 69-74

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  41. Design Methodology to Improve Human-Robot Coproduction in Small and Medium Sized Enterprises

    Çençen, A., Verlinden, J. & Geraedts, J., 2018, In : IEEE/ASME Transactions on Mechatronics. 23, 3, p. 1092-1102 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Design of a novel three- dimensional-printed two degrees-of-freedom steerable electrosurgical grasper for minimally invasive surgery

    Sakes, A., Hovland, K., Smit, G., Geraedts, J. & Breedveld, P., 2018, In : Journal of Medical Devices. 12, 1, 15 p., 011007.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Development of a high resolution topography and color scanner to capture crack patterns of paintings

    van Hengstum, M. J. W., Essers, T. T. W., Elkhuizen, W. S., Dodou, D., Song, Y., Geraedts, J. M. P. & Dik, J., 2018, GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage. Sablatnig, R. & Wimmer, M. (eds.). The Eurographics Association, p. 11-20 10 p. (GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  44. Digital Manufacturing of Fine Art Reproductions for Appearance

    Elkhuizen, W. S., Doubrovski, E. L., van Apeldoorn, N., Essers, T. T. W. & Geraedts, J. P. M., 2018, p. 1-1. 1 p.

    Research output: Contribution to conferencePosterScientific

  45. Effect of in-seat exercising on comfort perception of airplane passengers

    Bouwens, J., Fasulo, L., Hiemstra-van Mastrigt, S., Schultheis, U., Naddeo, A. & Vink, P., 2018, In : Applied Ergonomics. 73, p. 7-12 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Eye-tracking to differentiate viewing behavior of surgeons and trainees during laparoscopic pancreatoduodenectomy

    Brinkman, D., van der Vliet, W., Besselink, M., Busch, O., van Dam, R., Festen, S., de Hingh, I., Lips, D., Song, Y. & Luyer, M., 2018, In : HPB. 20, Supplement 2, p. S650-S650 1 p.

    Research output: Contribution to journalMeeting AbstractScientific

  47. Gloss Calibration and Gloss Gamut Mapping for Material Appearance Reproduction of Paintings

    Elkhuizen, W. S., Essers, T. T. W., Song, Y., Geraedts, J. M. P., Pont, S. C. & Dik, J., 2018, GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage. Sablatnig, R. & Wimmer, M. (eds.). The Eurographics Association, p. 161-164 4 p. (GCH 2018 - Eurographics Workshop on Graphics and Cultural Heritage).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  48. Guest Editorial Focused Section on Sensing and Perception Systems for Intelligent Manufacturing (SPIM)

    Chen, X., Zhang, S. & Geraedts, J., 2018, In : IEEE/ASME Transactions on Mechatronics. 23, 3, p. 983-985 3 p.

    Research output: Contribution to journalEditorialScientificpeer-review

  49. Hatching for 3D prints: Line-based halftoning for dual extrusion fused deposition modeling

    Kuipers, T., Elkhuizen, W., Verlinden, J. & Doubrovski, E., 2018, In : Computers & Graphics. 74, p. 23-32 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Length-scale dependency of biomimetic hard-soft composites

    Mirzaali Mazandarani, M., Edens, M. E., de la Nava, A. H., Janbaz, S., Vena, P., Doubrovski, E. L. & Zadpoor, A. A., 2018, In : Scientific Reports. 8, 1, 8 p., 12052.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Local and recyclable materials for additive manufacturing: 3D printing with mussel shells

    Sauerwein, M. & Doubrovski, Z., 2018, In : Materials Today Communications. 15, p. 214-217 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Mussels in the 3D printer

    Sauerwein, M., Vette, J. & Doubrovski, Z., 2018

    Research output: Non-textual formExhibitionScientific

  53. Nanostructure and microstructure fabrication: From desired properties to suitable processes

    van Assenbergh, P., Meinders, E., Geraedts, J. & Dodou, D., 2018, In : Small. 14, 20, 24 p., 1703401.

    Research output: Contribution to journalReview articleScientificpeer-review

Previous 1 2 Next

ID: 23727