1. 2020
  2. Applicability study of pulsed laser beam welding on ferritic–martensitic ODS eurofer steel

    Fu, J., van Slingerland, J., Brouwer, H., Bliznuk, V., Richardson, I. & Hermans, M., 2020, In : Metals. 10, 6, 9 p., 736.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Continuous and pulsed selective laser melting of Ti6Al4V lattice structures: Effect of post-processing on microstructural anisotropy and fatigue behaviour

    Karami, K., Blok, A., Weber, L., Ahmadi, S. M., Petrov, R., Nikolic, K., Borisov, E. V., Leeflang, S., Ayas, C., Zadpoor, A. A., Mehdipour, M., Reinton, E. & Popovich, V. A., 2020, In : Additive Manufacturing . 36, 17 p., 101433.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Effect of microstructure on cleavage fracture of thick-section quenched and tempered S690 high-strength steel

    Morete Barbosa Bertolo, V., Jiang, Q., Walters, C. L. & Popovich, V. A., 2020, Characterization of Minerals, Metals, and Materials 2020. Li, J., Zhang, M., Li, B. & E. A. (eds.). Cham, Switzerland: Springer, p. 155-168 (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  5. Failure Mechanisms of Mechanically and Thermally Produced Holes in High-Strength Low-Alloy Steel Plates Subjected to Fatigue Loading

    Jiménez-Peña, C., Goulas, C., Preußner, J. & Debruyne, D., 2020, In : Metals. 10, 3, 22 p., 318.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Gamma-Titanium Intermetallic Alloy Produced by Selective Laser Melting Using Mechanically Alloyed and Plasma Spheroidized Powders

    Polozov, I., Popovich, V., Razumov, N., Makhmutov, T. & Popovich, A., 2020, Proceedings of the 149th Annual Meeting and Exhibition Supplemental (TMS 2020). Cham, Switzerland: Springer, p. 375-383 (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  7. High-viscosity liquid mixing in a slug-flow micromixer: a numerical study

    Bordbar, A., Kheirandish, S., Taassob, A., Kamali, R. & Ebrahimi, A., 2020, In : Journal of Flow Chemistry. 10, 2, p. 449-459

    Research output: Contribution to journalArticleScientificpeer-review

  8. Microstructure characterisation and mechanical properties of ODS Eurofer steel subject to designed heat treatments

    Fu, J., Brouwer, J. C., Hendrikx, R. W. A., Richardson, I. M. & Hermans, M. J. M., 2020, In : Materials Science and Engineering A. 770, 9 p., 138568.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering

    Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2020, Proceedings of the 149th Annual Meeting and Exhibition Supplemental (TMS 2020). Cham, Switzerland: Springer, p. 2095-2102 (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  10. 2019
  11. A micro-mechanics perspective to the invariant-based approach to stiffness

    Arteiro, A., Pereira, L. F., Bessa, M. A., Furtado, C. & Camanho, P. P., 2019, In : Composites Science and Technology. 176, p. 72-80

    Research output: Contribution to journalArticleScientificpeer-review

  12. A numerical Bayesian-calibrated characterization method for multiscale prepreg preforming simulations with tension-shear coupling

    Zhang, W., Bostanabad, R., Liang, B., Su, X., Zeng, D., Bessa, M. A., Wang, Y., Chen, W. & Cao, J., 2019, In : Composites Science and Technology. 170, p. 15-24

    Research output: Contribution to journalArticleScientificpeer-review

  13. A review of mechanical properties of additively manufactured Inconel 718

    Hosseini, E. & Popovich, V. A., 2019, In : Additive Manufacturing . 30, 18 p., 100877.

    Research output: Contribution to journalReview articleScientificpeer-review

  14. Assessment of shell strength during solidification in the Mold Cracking Simulator (MCS) test

    Santillana, B., Paruchuri, V., Kripak, V., Prahl, U. & ten Horn, C., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50A, 1, p. 142-150

    Research output: Contribution to journalArticleScientificpeer-review

  15. Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

    Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Characterization. 152, p. 67-75

    Research output: Contribution to journalArticleScientificpeer-review

  16. Bayesian Machine Learning in Metamaterial Design: Fragile Becomes Supercompressible

    Bessa, M. A., Głowacki, P. & Houlder, M., 2019, In : Advanced Materials. 31, 48, 6 p., 1904845.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Deep learning predicts path-dependent plasticity

    Mozaffar, M., Bostanabad, R., Chen, W., Ehmann, K., Cao, J. & Bessa, M. A., 2019, In : Proceedings of the National Academy of Sciences of the United States of America. 116, 52, p. 26414-26420

    Research output: Contribution to journalArticleScientificpeer-review

  18. Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications

    Kumar, A., Makineni, S. K., Dutta, A., Goulas, C., Steenbergen, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 759, p. 210-223

    Research output: Contribution to journalArticleScientificpeer-review

  19. Effect of mechanical alloying and spark plasma sintering on the microstructure and mechanical properties of ODS Eurofer

    Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials and Design. 177, 12 p., 107849.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Effect of selective laser melting process parameters and heat treatment on microstructure and properties of titanium alloys produced from elemental powders

    Polozov, I., Borisov, E. & Popovich, V., 2019, In : Key Engineering Materials. 822, p. 549-555

    Research output: Contribution to journalArticleScientificpeer-review

  21. Evaluation of solidification cracking susceptibility during laser welding in advanced high strength automotive steels

    Agarwal, G., Kumar, A., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials and Design. 183, 12 p., 108104.

    Research output: Contribution to journalArticleScientificpeer-review

  22. From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials

    Ahmadi, S. M., Kumar, R., Borisov, E. V., Petrov, R., Leeflang, S., Li, Y., Tümer, N., Huizenga, R., Ayas, C., Zadpoor, A. A. & Popovich, V. A., 2019, In : Acta Biomaterialia. 83, p. 153-166

    Research output: Contribution to journalArticleScientificpeer-review

  23. Influence of hole-making procedures on fatigue behaviour of high strength steel plates

    Jiménez-Peña, C., Goulas, C., Rossi, B. & Debruyne, D., 2019, In : Journal of Constructional Steel Research. 158, p. 1-14

    Research output: Contribution to journalArticleScientificpeer-review

  24. Joining of oxide dispersion strengthened Eurofer steel via spark plasma sintering

    Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials Letters. 256, 4 p., 126670.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Microstructural evolution of white and brown etching layers in pearlitic rail steels

    Kumar, A., Agarwal, G., Petrov, R., Goto, S., Sietsma, J. & Herbig, M., 2019, In : Acta Materialia. 171, p. 48-64

    Research output: Contribution to journalArticleScientificpeer-review

  26. Microstructure and Mechanical Properties of Medium Carbon Steel Deposits Obtained via Wire and Arc Additive Manufacturing Using Metal-CoredWire

    Lin, Z., Goulas, C., Ya, W. & Hermans, M., 2019, In : Metals. 9, 6, 14 p., 673.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Recent developments and challenges of cleavage fracture modelling in steels: Aspects on microstructural mechanics and local approach methods

    Jiang, Q., Morete Barbosa Bertolo, V., Popovich, V. A. & Walters, C. L., 2019, proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering: Volume 4: Materials Technology. New York, NY, USA: ASME, 10 p. OMAE2019-95464

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  28. Sensitivity of numerical predictions to the permeability coefficient in simulations of melting and solidification using the enthalpy-porosity method

    Ebrahimi, A., Kleijn, C. & Richardson, I., 2019, In : Energies. 12, 22, 18 p., 4360.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Tailoring the Properties in Functionally Graded Alloy Inconel 718 Using Additive Technologies

    Popovich, V. A., Borisov, E. V., Sufiyarov, V. S. & Popovich, A. A., 2019, In : Metal Science and Heat Treatment. 60, 11-12, p. 701-709

    Research output: Contribution to journalArticleScientificpeer-review

  30. The Influence of Surface Deformation on Thermocapillary Flow Instabilities in Low Prandtl Melting Pools with Surfactants

    Ebrahimi, A., Kleijn, C. & Richardson, I., 2019, Proceedings of the 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM'19): 6th International Conference on Heat Transfer and Fluid Flow. 8 p. 201

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  31. The glass swing: a vector active structure made of glass struts and 3D-printed steel nodes

    Snijder, A. H., van der Linden, L. P. L., Goulas, C., Louter, C. & Nijsse, R., 2019, In : Glass Structures and Engineering. 5 (2020), p. 99-116

    Research output: Contribution to journalArticleScientificpeer-review

  32. Thermo-Mechanical Fatigue Lifetime Assessment of Spheroidal Cast Iron at Different Thermal Constraint Levels

    Ghodrat, S., Kalra, A., Kestens, L. & Riemslag, T., 2019, In : Metals. 9, 10, 23 p., 1068.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Towards intrinsically safe microstructures in resistant spot welded advanced and ultra high strength automotive steels

    Eftekharimilani, P., 2019, 184 p.

    Research output: ThesisDissertation (TU Delft)

  34. Welding in the world – update 2018

    Lippold, J. C., Böllinghaus, I. T. & Richardson, I., 2019, In : Welding in the World. 63, 1, 1 p.

    Research output: Contribution to journalEditorialProfessional

  35. ‘Flash’ annealing in a cold‐rolled low carbon steel alloyed with Cr, Mn, Mo, and Nb: Part I ‐ Continuous phase transformations

    Castro Cerda, F. M., Vercruysse, F., Goulas, K., Schulz, B. & Petrov, R. H., 2019, In : Steel Research International. 90, 1, 11 p., 1800098.

    Research output: Contribution to journalArticleScientificpeer-review

  36. 2018
  37. Autonomous high-temperature healing of surface cracks in Al2O3 containing Ti2AlC particles

    Boatemaa, L., Bosch, M., Farle, A. S., Bei, G. P., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the American Ceramic Society. 101, 12, p. 5684-5693

    Research output: Contribution to journalArticleScientificpeer-review

  38. Creep and thermomechanical fatigue of functionally graded inconel 718 produced by additive manufacturing

    Popovich, V. A., Borisov, E. V., Heurtebise, V., Riemslag, T., Popovich, A. A. & Sufiiarov, V. S., 2018, TMS 2018 - 147th Annual Meeting and Exhibition: Supplemental Proceedings. The Minerals, Metals & Materials Society Editor (ed.). Cham, Switzerland: Springer, p. 85-97 (Minerals, Metals and Materials Series; vol. Part F12).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  39. Effects of heat treatment on microstructure and mechanical behaviour of additive manufactured porous Ti6Al4V

    Ahmadi, S. M., Ashok Kumar Jain, R. K., Zadpoor, A. A., Ayas, C. & Popovich, V. A., 2018, In : IOP Conference Series: Materials Science and Engineering. 293, 1, 6 p., 012009.

    Research output: Contribution to journalConference articleScientificpeer-review

  40. Experimental evidence of liquid feeding during solidification of a steel

    Agarwal, G., Amirthalingam, M., Moon, S. C., Dippenaar, R. J., Richardson, I. M. & Hermans, M. J. M., 2018, In : Scripta Materialia. 146, p. 105-109

    Research output: Contribution to journalArticleScientificpeer-review

  41. Fatigue and quasi-static mechanical behavior of bio-degradable porous biomaterials based on magnesium alloys

    Hedayati, R., Ahmadi, S. M., Lietaert, K., Tümer, N., Li, Y., Amin Yavari, S. & Zadpoor, A. A., 2018, In : Journal of Biomedical Materials Research. Part A. 106, 7, p. 1798-1811

    Research output: Contribution to journalArticleScientificpeer-review

  42. Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type

    Ahmadi, S. M., Hedayati, R., Li, Y., Lietaert, K., Tümer, N., Fatemi, A., Rans, C. D., Pouran, B., Weinans, H. & Zadpoor, A. A., 2018, In : Acta Biomaterialia. 65, p. 292-304

    Research output: Contribution to journalArticleScientificpeer-review

  43. In situ strain investigation during laser welding using digital image correlation and finite-element-based numerical simulation

    Agarwal, G., Gao, H., Amirthalingam, M. & Hermans, M. J. M., 2018, In : Science and Technology of Welding and Joining . 23, 2, p. 134-139

    Research output: Contribution to journalArticleScientificpeer-review

  44. In-situ synchrotron X-ray diffraction studies on effects of plastic and Eelastic loading on bcc phase transformations of a 3rd generation 1 GPa advanced high strength steel

    Eftekharimilani, P., Huizenga, R. M., Kim Lee, B., Bernasconi, A. & Hermans, M. J. M., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 1, p. 78-87

    Research output: Contribution to journalArticleScientificpeer-review

  45. Investigation on hot cracking during laser welding by means of experimental and numerical methods

    Gao, H., Agarwal, G., Amirthalingam, M., Hermans, M. & Richardson, I., 2018, In : Welding in the World. 62, 1, p. 71-78

    Research output: Contribution to journalArticleScientificpeer-review

  46. Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials

    Hedayati, R., Ahmadi, S. M., Lietaert, K., Pouran, B., Li, Y., Weinans, H., Rans, C. D. & Zadpoor, A. A., 2018, In : Journal of the Mechanical Behavior of Biomedical Materials. 79, p. 254-263

    Research output: Contribution to journalArticleScientificpeer-review

  47. Residual stress measurements and model validation of single and double pulse resistance spot welded advanced high strength steel

    Eftekharimilani, P., Gao, H., Huizenga, R., van der Aa, EM., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 401-415

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  48. Revealing internal flow behaviour in arc welding and additive manufacturing of metals

    Aucott, L., Dong, H., Mirihanage, W., Atwood, R., Kidess, A., Gao, S., Wen, S., Marsden, J., Feng, S., Tong, M., Connolley, T., Drakopoulos, M., Kleijn, C. R., Richardson, I. M., Browne, D. J., Mathiesen, R. H. & Atkinson, H. V., 2018, In : Nature Communications. 9, 7 p., 5414.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Study of solidification cracking in a transformation-induced plasticity-aided steel

    Agarwal, G., Kumar, A., Gao, H., Amirthalingam, M., Moon, S. C., Dippenaar, R. J., Richardson, I. M. & Hermans, M. J. M., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 4, p. 1015-1020

    Research output: Contribution to journalArticleScientificpeer-review

  50. Study of solidification cracking in advanced high strength automotive steels

    Agarwal, G., Gao, H., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 465-483

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  51. Study of solidification cracking susceptibility during laser welding in an advanced high strength automotive steel

    Agarwal, G., Gao, H., Amirthalingam, M. & Hermans, M., 2018, In : Metals. 8, 9, 15 p., 673.

    Research output: Contribution to journalArticleScientificpeer-review

  52. The use of circumferentially notched tension (CNT) specimen for fracture toughness assessment of high strength steels

    Popovich, V. A., Opraus, T., Janssen, M., Hu, B. & Riemslag, A. C., 2018, TMS 2018 - 147th Annual Meeting and Exhibition : Supplemental Proceedings. The Minerals, Metals & Materials Society Editor (ed.). Cham, Switzerland: Springer, p. 497-507 (Minerals, Metals and Materials Series; vol. Part F12).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  53. Understanding the effect of a paint bake cycle on the microstructure–mechanical properties relationship of a resistance spot welded advanced high strength steel

    Eftekharimilani, P., van der Aa, E. M., Petrov, R., Hermans, M. J. M. & Richardson, I. M., 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 12, p. 6185-6196

    Research output: Contribution to journalArticleScientificpeer-review

  54. 2017
  55. Arc welding and hybrid laser-arc welding

    Richardson, I., 2017, The Theory of Laser Materials Processing : Heat and Mass Transfer in Modern Technology. Dowden, J. & Schulz, W. (eds.). Second Edition ed. Cham, Switzerland: Springer, p. 189-239 (Springer Series in Materials Science; vol. 119).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  56. Control of welding distortion during gas metal arc welding of AH36 plates by stress engineering

    Pazooki, A. M. A., Hermans, M. & Richardson, I., 2017, In : International Journal of Advanced Manufacturing Technology. 88, 5, p. 1439 - 1457

    Research output: Contribution to journalArticleScientificpeer-review

  57. DSMC investigation of rarefied gas flow through diverging micro- and nanochannels

    Ebrahimi, A. & Roohi, E., 2017, In : Microfluidics and Nanofluidics. 21, 2, 12 p., 18.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Design and optimization method for 3D printed carbon reinforced aircraft components

    Van Den Brink, W. M., Van Der Klift, F., Bruins, R. & Hermans, M. J. M., 2017, 21st International Conference on Composite Materials (ICCM 2017). International Committee on Composite Materials, 12 p. 3193

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  59. Effects of laser processing parameters on the mechanical properties, topology, and microstructure of additively manufactured porous metallic biomaterials: A vector-based approach

    Ahmadi, M., Hedayati, R., Ashok Kumar Jain, R. K., Li, Y., Leeflang, S. & Zadpoor, A., 2017, In : Materials & Design. 134, p. 234-243

    Research output: Contribution to journalArticleScientificpeer-review

  60. Fatigue fracture of a high-resistance structural steel component destined to sustain severe loads under service conditions

    Papaefthymiou, S., Vazdirvanidis, A., Pantazopoulos, G. & Goulas, K., 2017, In : Journal of Failure Analysis and Prevention. 17, 1, p. 79-85

    Research output: Contribution to journalArticleScientificpeer-review

  61. Finite element simulation and experimental investigation of thermal tensioning during welding of DP600 steel

    Pazooki, A. M. A., Hermans, M. & Richardson, I., 2017, In : Science and Technology of Welding and Joining . 22, 1, p. 7 - 21

    Research output: Contribution to journalArticleScientificpeer-review

  62. Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties

    Popovich, V., Borisov, E. V., Popovich, A. A., Sufiiarov, V. S., Masaylo, D. V. & Alzina, L., 2017, In : Materials & Design. 114, p. 441-449

    Research output: Contribution to journalArticleScientificpeer-review

  63. Hot cracking investigation during laser welding of high-strength steels with multi-scale modelling approach

    Gao, H., Agarwal, G., Amirthalingam, M. & Hermans, M. J. M., 2017, In : Science and Technology of Welding and Joining . 23 (2018), 4, p. 287-294

    Research output: Contribution to journalArticleScientificpeer-review

  64. Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting

    Popovich, V. A., Borisov, E. V., Popovich, A. A., Sufiiarov, V. S., Masaylo, D. V. & Alzina, L., 2017, In : Materials & Design. 131, p. 12-22

    Research output: Contribution to journalArticleScientificpeer-review

  65. Laminar convective heat transfer of shear-thinning liquids in rectangular channels with longitudinal vortex generators

    Ebrahimi, A., Naranjani, B., Milani, S. & Dadras Javan, F., 2017, In : Chemical Engineering Science. 173, p. 264-274

    Research output: Contribution to journalArticleScientificpeer-review

  66. Measuring plasticity with orientation contrast microscopy in aluminium 6061-T4

    Ghodrat, S., Riemslag, T. & Kestens, L., 2017, In : Metals. 7, 4, 8 p., 108.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Microstructural characterisation of double pulse resistance spot welded advanced high strength steel

    Eftekharimilani, P., van der Aa, E. M., Hermans, M. J. M. & Richardson, I. M., 2017, In : Science and Technology of Welding and Joining . 22, 7, p. 545-554

    Research output: Contribution to journalArticleScientificpeer-review

  68. Microstructure and mechanical properties of CuAl8Ni6 produced by Wire Arc Additive Manufacturing for marine applications

    Ya, W., Goulas, K., Hamilton, K., Hermans, M., Römer, G-W. & Richardson, I., 2017.

    Research output: Contribution to conferenceOtherOther research output

  69. The effect of heating rate on the microstructure of a soft-annealed medium carbon steel

    Papaefthymiou, S., Goulas, K., Castro Cerda, F. M., Geerlofs, N. & Petrov, R., 2017, In : Steel Research International. 88, 10, 9 p., 1700158.

    Research output: Contribution to journalArticleScientificpeer-review

  70. The effect of the pre-heating stage on the microstructure and texture of a cold rolled FeCMnAlSi steel under conventional and ultrafast heating

    Castro Cerda, F. M., Goulas, K., Sabirov, I., Kestens, L. A. I. & Petrov, R. H., 2017, In : Materials Characterization. 130, p. 188-197 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. The microstructural evolution and elemental distribution of a 3rd generation 1 GPa advanced high strength steel during double pulse resistance spot welding

    Eftekharimilani, P., van der Aa, EM., Hermans, M. & Richardson, I., 2017, In : Welding in the World. 61, 4, p. 691 - 701

    Research output: Contribution to journalArticleScientificpeer-review

  72. The strength and ductility of glass fibre reinforced 3D-printed polypropylene

    Veer, F., Setaki, F., Riemslag, T. & Sakkas, P., 2017, In : Heron. 62, 2, p. 85-97

    Research output: Contribution to journalArticleScientificpeer-review

  73. 2016
  74. An investigation on thermo-hydraulic performance of a flat-plate channel with pyramidal protrusions

    Ebrahimi, A. & Naranjani, B., 2016, In : Applied Thermal Engineering. 106, p. 316-324

    Research output: Contribution to journalArticleScientificpeer-review

  75. Demonstrating the self-healing behaviour of some selected ceramics under combustion chamber conditions

    Farle, A., Boatemaa, L., Shen, L., Gövert, S., Kok, J. B. W., Bosch, M., Yoshioka, S., Van Der Zwaag, S. & Sloof, W. G., 2016, In : Smart Materials and Structures. 25, 8, 10 p., 084019.

    Research output: Contribution to journalArticleScientificpeer-review

  76. 2015
  77. Resistance spot welding of advanced high strength steels

    den Uijl, NJ., 2015, 178 p.

    Research output: ThesisDissertation (TU Delft)

ID: 22363