1. 2020
  2. A Markovian approach to power generation capacity assessment of floating wave energy converters

    Arzaghi, E., Abaei, M. M., Abbassi, R., O'Reilly, M., Garaniya, V. & Penesis, I., 2020, In : Renewable Energy. 146, p. 2736-2743

    Research output: Contribution to journalArticleScientificpeer-review

  3. An investigation on the circumferential surface crack growth in steel pipes subjected to fatigue bending

    Li, Z., Jiang, X., Hopman, H., Zhu, L. & Liu, Z., 2020, In : Theoretical and Applied Fracture Mechanics. 105, 14 p., 102403.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Assessing complex failure scenarios of on-board distributed systems using a Markov chain

    Habben Jansen, A., Duchateau, E. A. E., Kana, A. A. & Hopman, J. J., 2020, In : Journal of Marine Engineering and Technology. 19, Sup1, p. 45-61

    Research output: Contribution to journalArticleScientificpeer-review

  5. Dynamic simulation of a vessel drive system with dual fuel engines and energy storage

    Mestemaker, B. T. W., Goncalves Castro, M. B., van den Heuvel, H. N. & Visser, K., 2020, In : Energy. 194, 13 p., 116792.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Naval Engineering and Ship Control Special Edition Editorial

    Geertsma, R. D., 2020, In : Journal of Marine Engineering and Technology. 19, Sup1, p. 1-4

    Research output: Contribution to journalEditorialScientificpeer-review

  7. On adaptive sliding mode control without a priori bounded uncertainty

    Roy, S., Baldi, S. & Fridman, L. M., 2020, In : Automatica. 111, 6 p., 108650.

    Research output: Contribution to journalArticleScientificpeer-review

  8. On reliability challenges of repairable systems using hierarchical bayesian inference and maximum likelihood estimation

    BahooToroody, A., Abaei, M. M., Arzaghi, E., Song, G., De Carlo, F., Paltrinieri, N. & Abbassi, R., 2020, In : Process Safety and Environmental Protection. 135, p. 157-165

    Research output: Contribution to journalArticleScientificpeer-review

  9. Predicting the wet collapse pressure for flexible risers with initial ovalization and gap: An analytical solution

    Li, X., Jiang, X. & Hopman, H., 2020, In : Marine Structures. 71, 14 p., 102732.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Solid oxide fuel cells for ships: System integration concepts with reforming and thermal cycles

    van Biert, L., 2020, 229 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  11. Towards structure-independent stabilization for uncertain underactuated Euler–Lagrange systems

    Roy, S. & Baldi, S., 2020, In : Automatica. 113, 8 p., 108775.

    Research output: Contribution to journalArticleScientificpeer-review

  12. 2019
  13. Intrinsic methane steam reforming kinetics on nickel-ceria solid oxide fuel cell anodes

    van Biert, L., Visser, K. & Aravind, P. V., 15 Dec 2019, In : Journal of Power Sources. 443, 12 p., 227261.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Evaluation of Hybrid Electric Turbocharging for Medium Speed Engines

    Mestemaker, B., Westhoeve, J. & Visser, K., 9 Sep 2019, In : SAE Technical Papers. 2019-September, September

    Research output: Contribution to journalConference articleScientificpeer-review

  15. Sustainable product-package design in a food supply chain: A multi-criteria life cycle approach

    Rezaei, J., Papakonstantinou, A., Tavasszy, L., Pesch, U. & Kana, A., Feb 2019, In : Packaging Technology and Science. 32, 2, p. 85-101 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. A Markov-based vulnerability assessment for the design of on-board distributed systems in the concept phase

    Habben Jansen, A. C., Kana, A. A. & Hopman, J. J., 2019, In : Ocean Engineering. 190, 11 p., 106448.

    Research output: Contribution to journalArticleScientificpeer-review

  17. A Multi-Scenario Simulation Transport Model to Assess the Economics of Semi-Autonomous Platooning Concepts

    Colling, A. & Hekkenberg, R., 2019, Proceedings of the 18th Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2019). p. 132-145

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. A Study of Ship’s Frictional Resistance in Extremely Shallow Water

    Zeng, Q., Hekkenberg, R. & Thill, C., 2019, Proceedings ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering . ASME, Vol. 2. 11 p. OMAE2019-95076

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. A design flow of rudder configurations based on maneuvering simulations

    Liu, J., Hekkenberg, R. & Li, S., 2019, In : Journal of Ship Research.

    Research output: Contribution to journalArticleScientificpeer-review

  20. A method to improve the prediction of ship resistance in shallow water

    Zeng, Q., 2019, 167 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  21. A new continuous-time stability perspective of time-delay control: Introducing a state-dependent upper bound structure

    Roy, S., Lee, J. & Baldi, S., 2019, In : IEEE Control Systems Letters. 3, 2, p. 475-480

    Research output: Contribution to journalArticleScientificpeer-review

  22. A simultaneous adaptation law for a class of nonlinearly-parametrized switched systems

    Roy, S. & Baldi, S., 2019, In : IEEE Control Systems Letters. 3, 3, p. 487-492

    Research output: Contribution to journalArticleScientificpeer-review

  23. An Expert System for Cost Estimation of Shipyard Steel Assembly

    Deul, M., Hoek, B. J., Moussault, S., Nijdam, A-L., Alblas, G. & Hekkenberg, R., 2019, Proceedings of the 18th Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2019). p. 213-223

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. An agent-based simulation model for the crowd on passenger ships

    Kana, A. A., Li, Y., Atasoy, B. & Cai, W., 2019, Proceedings of the 19th International Conference on Computer Applications in Shipbuilding, ICCAS 2019. Royal Institution of Naval Architects, Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. An analytical approach for predicting the collapse pressure of the flexible risers withinitial ovalization and gap

    Li, X., Jiang, X. & Hopman, H., 2019, Proceedings of the ASME 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019): Volume 5A: Pipelines, Risers, and Subsea Systems. New York, NY, USA: ASME, 8 p. OMAE2019-95642

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Assessment of the Required Subdivision Index for Autonomous Ships based on Equivalent Safety

    de Vos, J. & Hekkenberg, R., 2019, Proceedings of the International Seminar on Safety and Security of Autonomous Vessels (ISSAV) and European STAMP Workshop and Conference (ESWC) 2019. Valdez Banda, O. A., Kujala, P., Hirdaris, S. & Basnet, S. (eds.). Sciendo, p. 14-23

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Autonomous control for adaptive ships: with hybrid propulsion and power generation

    Geertsma, R., 2019, 271 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  28. Case study: Wind-assisted ship propulsion performance prediction, routing, and economic modelling

    van der Kolk, N., Bordogna, G., Mason, J. C., Desprairies, P. & Vrijdag, A., 2019, Proceedings of the International Conference Power & Propulsion Alternatives for Ships . London, UK: The Royal Institution of Naval Architects - RINA, 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Design of level of service on facilities for crowd evacuation using genetic algorithm optimization

    Li, Y., Cai, W. & Kana, A. A., 2019, In : Safety Science. 120, p. 237-247

    Research output: Contribution to journalArticleScientificpeer-review

  30. Distributed Model Predictive Control for cooperative floating object transport with multi-vessel systems

    Chen, L., Hopman, H. & Negenborn, R. R., 2019, In : Ocean Engineering. 191, 16 p., 106515.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Dynamic modelling of a direct internal reforming solid oxide fuel cell stack based on single cell experiments

    van Biert, L., Godjevac, M., Visser, K. & Aravind, P. V., 2019, In : Applied Energy. 250, p. 976-990

    Research output: Contribution to journalArticleScientificpeer-review

  32. Energy effectiveness of ocean-going cargo ship under various operating conditions

    Sui, C., Stapersma, D., Visser, K., de Vos, P. & Ding, Y., 2019, In : Ocean Engineering. 190, 18 p., 106473.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Evaluation of an equivalent design wave method to define lifetime combined loading scenarios for trimarans

    Seyffert, H. C. & Kana, A. A., 2019, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering: Volume 3: Structures, Safety, and Reliability. New York, NY, USA: ASME, 10 p. OMAE 2019-95497

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Experimental investigations of marine diesel engine performance against dynamic back pressure at varying sea-states due to underwater exhaust systems

    Sapra, H. D., Singh, J., Dijkstra, C., de Vos, P. & Visser, K., 2019, Proceedings ASME 2019 Internal Combustion Engine Division Fall Technical Conference. New York, NY, USA: ASME, 12 p. ICEF2019-7216

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Exploration of a systems and control approach to reduce propeller cavitation in a seaway

    Vrijdag, A. & Schuttevaer, D., 2019, In : Ocean Engineering. 182, p. 174-187

    Research output: Contribution to journalArticleScientificpeer-review

  36. Influence of inland vessel stern shape aspects on propulsive performance: Derivation of insights and guidelines based on a computational study

    Rotteveel, E., 2019, Delft: Delft University of Technology. 163 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  37. Introducing operational information into early stage ship design using queueing networks

    Droste, K., Hopman, J. J., Kana, A. A. & van Oers, B. J., 2019, Proceedings of the 19th International Conference on Computer Applications in Shipbuilding, ICCAS 2019. Royal Institution of Naval Architects, Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Joint estimation of vessel position and mooring stiffness during offshore crane operations

    Ye, J., Godjevac, M., Baldi, S. & Hopman, H., 2019, In : Automation in Construction. 101, p. 218-226 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. New design methodology for adaptive switching gain based discrete-time sliding mode control

    Sharma, N. K., Roy, S. & Janardhanan, S., 2019, In : International Journal of Control. 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Numerical analysis on the SIF of internal surface cracks in steel pipes reinforced with CRS subjected to bending

    Li, Z., Jiang, X. & Hopman, H., 2019, In : Ships and Offshore Structures. 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Numerical investigation on surface crack growth in steel plates repaired with carbon fiber-reinforced polymer

    Li, Z., Jiang, X. & Hopman, H., 2019, Proceedings of the ASME 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019): Volume 4: Materials Technology. New York, NY, USA: ASME, 8 p. OMAE2019-95746

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Observer-based robust control for dynamic positioning of large-scale heavy lift vessels

    Ye, J., Roy, S., Godjevac, M. & Baldi, S., 2019, In : IFAC-PapersOnLine. 52, 3, p. 138-143

    Research output: Contribution to journalConference articleScientificpeer-review

  43. On reduced-complexity robust adaptive control of switched Euler–Lagrange systems

    Roy, S. & Baldi, S., 2019, In : Nonlinear Analysis: Hybrid Systems. 34, p. 226-237

    Research output: Contribution to journalArticleScientificpeer-review

  44. On the viscous resistance of ships sailing in shallow water

    Zeng, Q., Hekkenberg, R. & Thill, C., 2019, In : Ocean Engineering. 190, 13 p., 106434.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Optimizing inventory strategy for modular shipbuilding

    van der Beek, T., van Essen, T., Pruijn, J., Aardal, K. & Hopman, H., 2019, 19th International Conference on Computer Applications in Shipbuilding (ICCAS 2019). Royal Institution of Naval Architects, p. 165-172

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Overcoming the Underestimation and Overestimation Problems in Adaptive Sliding Mode Control

    Roy, S., Roy, S. B., Lee, J. & Baldi, S., 2019, In : IEEE/ASME Transactions on Mechatronics. 24, 5, p. 2031-2039

    Research output: Contribution to journalArticleScientificpeer-review

  47. Semi-automated approach for detailed layout generation during early stage surface warship design

    le Poole, J., Hopman, J. J., Kana, A. A., Duchateau, E. A. E. & van Oers, B. J., 2019, Proceedings of the 19th International Conference on Computer Applications in Shipbuilding, ICCAS 2019. Royal Institution of Naval Architects, Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Shallow water effects on ship-generated waves

    Zeng, Q., Thill, C. & Hekkenberg, R., 2019, Proceedings of the 5th MASHCON: International Conference on Ship Manoeuvring in Shallow and Confined Water with non-exclusive focus on manoeuvring in waves, wind and current. Candries, M., Lataire, E., Eloot, K. & Delefortrie, G. (eds.). Ghent University, p. 523-534

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Towards Unmanned Cargo-Ships: The Effects of Automating Navigational Tasks on Crewing Levels

    Kooij, C. & Hekkenberg, R., 2019, Proceedings of the 18th Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2019). p. 104-117

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. 2018
  51. A benchmark test of ship resistance in extremely shallow water

    Zeng, Q., Thill, C. & Hekkenberg, R., 2018, Progress in Maritime Technology and Engineering: Proceedings of the 4th International Conference on Maritime Technology and Engineering (MARTECH 2018). Guedes Soares, C. & Santos, T. A. (eds.). Leiden, The Netherlands: CRC Press / Balkema - Taylor & Francis Group, p. 221-229

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. A modification of the ITTC57 correlation line for shallow water

    Zeng, Q., Thill, C., Hekkenberg, R. & Rotteveel, E., 2018, In : Journal of Marine Science and Technology (Japan). 24 (2019), 2, p. 642-657

    Research output: Contribution to journalArticleScientificpeer-review

  53. A review on predicting critical collapse pressure of flexible risers for ultra-deep oil and gas production

    Li, X., Jiang, X. & Hopman, H., 2018, In : Applied Ocean Research. 80, p. 1-10

    Research output: Contribution to journalArticleScientificpeer-review

  54. A spring-supported arch model for predicting the hydrostatic collapse strength of flexible risers with layer gap

    Li, X., Jiang, X. & Hopman, H., 2018, Proceedings of the 32nd Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2018). p. 74-82

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. A strain energy-based equivalent layer method for the prediction of critical collapse pressure of flexible risers

    Li, X., Jiang, X. & Hopman, H., 2018, Proceedings ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering: Volume 5: Pipelines, Risers, and Subsea Systems. New York, NY, USA: ASME, 9 p. OMAE2018-78266

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. A strain energy-based equivalent layer method for the prediction of critical collapse pressure of flexible risers

    Li, X., Jiang, X. & Hopman, H., 2018, In : Ocean Engineering. 164, p. 248-255

    Research output: Contribution to journalArticleScientificpeer-review

  57. A thermodynamic comparison of solid oxide fuel cell-combined cycles

    van Biert, L., Woudstra, T., Godjevac, M., Visser, K. & Aravind, P. V., 2018, In : Journal of Power Sources. 397, p. 382-396

    Research output: Contribution to journalArticleScientificpeer-review

  58. A unified framework improving interoperability and symbiosis in the field of Systems Engineering

    van Ruijven, L., 2018, 313 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  59. Adaptive pitch control for ships with diesel mechanical and hybrid propulsion

    Geertsma, R. D., Visser, K. & Negenborn, R. R., 2018, In : Applied Energy. 228, p. 2490-2509

    Research output: Contribution to journalArticleScientificpeer-review

  60. An approach for an operational vulnerability assessment for naval ships using a Markov model

    Habben Jansen, A., Kana, A. & Hopman, H., 2018, Marine Design XIII: Proceedings of the 13th International Marine Design Conference (IMDC 2018). Kujala, P. & Lu, L. (eds.). CRC Press, Vol. 2. p. 1073-1082

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. An architectural framework for distributed naval ship systems

    Brefort, D., Shields, C., Habben Jansen, A., Duchateau, E., Pawling, R., Droste, K., Jaspers, T., Sypniewski, M., Goodrum, C., Parsons, M. A., Kara, M. Y., Roth, M., Singer, D. J., Andrews, D., Hopman, H., Brown, A. & Kana, A. A., 2018, In : Ocean Engineering. 147, p. 375-385

    Research output: Contribution to journalArticleScientificpeer-review

  62. Automatic topology generation for early design of on-board energy distribution systems

    de Vos, P. & Stapersma, D., 2018, In : Ocean Engineering. 170, p. 55-73

    Research output: Contribution to journalArticleScientificpeer-review

  63. Design space exploration for on-board energy distribution systems: A new case study

    de Vos, P., Stapersma, D., Duchateau, E. & van Oers, B., 2018, Proceedings of the 17th International Conference on Computer and IT Applications in the Maritime Industries (COMPIT '18). Bertram, V. (ed.). Hamburg, Germany: Technische Universität Hamburg-Harburg, p. 463-481

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Developing performance indicators for a logistics model for vessel platooning

    Meersman, H., Moschouli, E., Sys, C., Van der Voorde, E., Vanelslander, T., van Hassel, E., Friedhoff, B., Hekkenberg, R., Hoyer, K. & Tenzer, M., 2018, Global Maritime Conference (GLOBMAR 2018). 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  65. Developing performance indicators for a logistics model for vessel platooning

    Meersman, H., Moschouli, E., Sys, C., Van der Voorde, E., Vanelslander, T., van Hassel, E., Friedhoff, B., Hekkenberg, R., Hoyer, K. & Tenzer, M., 2018, Conference WCTRS, Special Interest Group 2, 3-4 May, 2018, Antwerp, Belgium. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  66. Development and lessons learned of a block-based conceptual submarine design tool for graduate education

    Kana, A. A. & Rotteveel, E., 2018, Marine Design XIII: Proceedings of the 13th International Marine Design Conference (MDC 2018). Kujala, P. & Lu, L. (eds.). CRC Press / Balkema - Taylor & Francis Group, Vol. 1. p. 103-112

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Distributed model predictive control for vessel train formations of cooperative multi-vessel systems

    Chen, L., Hopman, H. & Negenborn, R. R., 2018, In : Transportation Research Part C: Emerging Technologies. 92, p. 101-118

    Research output: Contribution to journalArticleScientificpeer-review

  68. Early stage routing of distributed ship service systems for vulnerability reduction

    Duchateau, E., de Vos, P. & van Leeuwen, S., 2018, Marine Design XIII: Proceedings of the 13th International Marine Design Conference (IMDC 2018). Kujala, P. & Lu, L. (eds.). CRC Press, Vol. 2. 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Effect of uncertainty on techno-economic trade-off studies: ship power and propulsion concepts

    Vrijdag, A., Boonen, E-J. & Lehne, M., 2018, In : Journal of Marine Engineering and Technology. 18 (2019), 3, p. 122-133

    Research output: Contribution to journalArticleScientificpeer-review

  70. Efficiency constraints of energy storage for on-board power systems

    Georgescu, I., Godjevac, M. & Visser, K., 2018, In : Ocean Engineering. 162, p. 239-247

    Research output: Contribution to journalArticleScientificpeer-review

  71. Experimental investigations of hydrogen-natural gas engines for maritime applications

    Sapra, H. D., Linden, Y., Van Sluijs, W., Godjevac, M. & Visser, K., 2018, Proceedings ASME 2018 Internal Combustion Engine Division Fall Technical Conference: Volume 1: Large Bore Engines; Fuels; Advanced Combustion. New York, NY, USA: ASME, 10 p. ICEF2018-9615

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Fingerprinting the ship propulsion system: low hanging fruit or mission impossible?

    Vrijdag, A. & Sang, Y., 2018, INEC/iSCSS 2018 Conference Proceedings. Institute of Marine Engineering, Science and Technology, 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Haptic assistance to mitigate damaging vertical accelerations of small ships in head waves

    Kok, R., Vrijdag, A., van 't Veer, R. & Abbink, D., 2018, 25th International HISWA Symposium on Yacht Design and Yacht Construction: Back to the future (HISWA 2018). Amsterdam, The Netherlands: HISWA, 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  74. Internal surface crack growth in offshore rigid pipes reinforced with CFRP

    Li, Z., Jiang, X., Liu, Z. & Hopman, H., 2018, Proceedings ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering: Volume 4: Materials Technology. New York, NY, USA: ASME, 8 p. Paper No. OMAE2018-78060

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Intersection crossing of cooperative multi-vessel systems

    Chen, L., Negenborn, R. & Hopman, H., 2018, In : IFAC-PapersOnLine. 51, 9, p. 379-385

    Research output: Contribution to journalConference articleScientificpeer-review

  76. Investigating the prospects of using a plasma gasification plant to improve the offer price of ships recycled on large-sized ‘green’ yards

    Jain, K. & Pruijn, J., 2018, In : Journal of Cleaner Production. 171, p. 1520-1531

    Research output: Contribution to journalArticleScientificpeer-review

  77. Maritime environmental performance indicators for urban waterways in Amsterdam

    Jacobs, F. A. G., Visser, K. & Stapersma, D., 2018, In : Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment. 232, 3, p. 263-275

    Research output: Contribution to journalArticleScientificpeer-review

  78. Numerical investigation of the SIFs of the external surface crack in rigid pipe reinforced with FRP

    Li, Z., Jiang, X. & Hopman, H., 2018, Proceedings of the 32nd Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures (TEAM 2018). p. 1-6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. On early-stage design of vital distribution systems on board ships

    de Vos, P., 2018, 202 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  80. Prediction of the critical collapse pressure of ultra-deep water flexible risers: A literature review

    Li, X., Jiang, X. & Hopman, H., 2018, In : FME Transactions. 46, 3, p. 306-312

    Research output: Contribution to journalLiterature reviewScientificpeer-review

  81. Process-based analysis of arrangement aspects for configuration-driven ships: Operational challenges of unmanned short sea cargo vessels

    Droste, K., Kana, A. & Hopman, H., 2018, Marine Design XIII: Proceedings of the 13th International Marine Design Conference (IMDC 2018). Kujala, P. & Lu, L. (eds.). CRC Press, Vol. 1. p. 327-337

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Propeller-engine interaction in a dynamic model scale environment

    Huijgens, L., Vrijdag, A. & Hopman, H., 2018, Proceedings of the 28th (2018) International Ocean and Polar Engineering Conference (ISOPE-2018). Chung, J. S., Hyun, B-S., Matskevitch, D. & Wang, A. M. (eds.). Cupertino, CA, USA: International Society of Offshore and Polar Engineers (ISOPE), p. 798-804

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. RANS study on hydrodynamic characteristics of flapped rudders

    Liu, J., Hekkenberg, R. & Zhao, B., 2018, Honoring Symposium for Professor Carlos Guedes Soares on Marine Technology and Ocean Engineering: Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. New York, NY, USA: ASME, Vol. 11B. 11 p. OMAE2018-77424. (ASME Conference Proceedings; vol. 2018/11B).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Ship energy management for hybrid propulsion and power supply with shore charging

    Kalikatzarakis, M., Geertsma, R. D., Boonen, E. J., Visser, K. & Negenborn, R. R., 2018, In : Control Engineering Practice. 76, p. 133-154

    Research output: Contribution to journalArticleScientificpeer-review

  85. Similarity-based cost estimations for eto-products

    Alblas, G. & Coenen, J., 2018, Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, ICMR 2018, incorporating the 33rd National Conference on Manufacturing Research. Case, K. & Thorvald, P. (eds.). Amsterdam, The Netherlands: IOS Press, p. 279-284 (Advances in Transdisciplinary Engineering ; vol. 8).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. State of the art report on design methodology

    Andrews, D., Kana, A., Hopman, H. & Romanoff, J., 2018, Marine Design XIII: Proceedings of the 13th International Marine Design Conference (IMDC 2018). Kujala, P. & Lu, L. (eds.). CRC Press, Vol. 2. p. 3 - 16

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Submarine propulsion plant design using Mean Value First Principle models

    ten Hacken, M., de Vos, P., Boogaart, R. & Visser, K., 2018, Proceedings Undersea Defence Technology 2018 (UDT 2018). 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Sustainability in fishing vessel design process 1988-2018

    Veenstra, F. A., Stoop, J. & Hopman, H., 2018, Progress in Maritime Technology and Engineering: Proceedings of the 4th International Conference on Maritime Technology and Engineering (MARTECH 2018). Guedes Soares, C. & Santos, T. A. (eds.). Leiden, The Netherlands: CRC Press / Balkema - Taylor & Francis Group, p. 275-282

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Towards autonomous shipping: Operational challenges of unmanned short sea cargo vessels

    Kooij, C., Loonstijn, M., Hekkenberg, R. & Visser, K., 2018, Marine Design XIII: Proceedings of the 13th International Marine Design Conference (IMDC 2018). Kujala, P. & Lu, L. (eds.). CRC Press, Vol. 2. p. 871-880

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Using Markov Chains to analyze days delay due to port congestion

    Groeneveld, W., Kana, A. & Pruijn, J., 2018, Conference WCTRS, Special Interest Group 2, 3-4 May, 2018, Antwerp, Belgium. 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  91. When will autonomous ships arrive? A technological forecasting perspective

    Kooij, C., Colling, A. & Benson, C., 2018, INEC Conference 2018: SSRN. SSRN, 11 p. 3191736

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  92. 2017
  93. Diesel A-M (A-Modular) Model Proposed: Expanding the Diesel A model for advanced turbocharging capabilities

    Loonstijn, M., Apr 2017, Delft University of Technology. 20 p. (Report - Ship Design Production and Operations (SDPO); vol. 2018, no. 8252)

    Research output: Book/ReportReportScientific

  94. A Monte Carlo approach to the ship-centric Markov decision process for analyzing decisions over converting a containership to LNG power

    Kana, A. A. & Harrison, B. M., 2017, In : Ocean Engineering. 130, p. 40-48

    Research output: Contribution to journalArticleScientificpeer-review

  95. A new perspective on the complexity of on-board primary power systems

    Georgescu, I., Godjevac, M. & Visser, K., 2017, In : Journal of Ship Production and Design. 35 (2019), 1, p. 19-30

    Research output: Contribution to journalArticleScientificpeer-review

  96. A numerical and experimental study of resistance, trim and sinkage of an inland ship model in extremely shallow water

    Zeng, Q., Hekkenberg, R., Thill, C. & Rotteveel, E., 2017, Proceedings of the International Conference on Computer Applications in Shipbuilding (ICCAS 2017). London, UK: The Royal Institution of Naval Architects - RINA, Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. A quantitative comparison of hybrid diesel-electric and gas-turbine-electric propulsion for future frigates

    Geertsma, R., Vollbrandt, J., Negenborn, R., Visser, K. & Hopman, H., 2017, Proceedings of the 2017 IEEE Electric Ship Technologies Symposium (ESTS). Sudhoff, S. & Pekarek, S. (eds.). Piscataway, NJ, USA: IEEE, p. 451-458

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. An early-stage design model for estimating ship evacuation patterns using the ship-centric Markov decision process

    Kana, A. & Droste, K., 2017, In : Institution of Mechanical Engineers. Proceedings. Part M: Journal of Engineering for the Maritime Environment. 233, 1, p. 138-149

    Research output: Contribution to journalArticleScientificpeer-review

  99. An integrated empirical manoeuvring model for inland vessels

    Liu, J., Hekkenberg, R., Quadvlieg, F., Hopman, H. & Zhao, B., 2017, In : Ocean Engineering. 137, p. 287-308

    Research output: Contribution to journalArticleScientificpeer-review

  100. An overview of the global ship recycling industry

    Jain, K. & Pruijn, J., 2017, Reference Module in Materials Science and Materials Engineering. Hashmi, M. S. J. (ed.). Elsevier, p. 1-22

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  101. Analysis of general arrangements created by the TU Delft packing approach

    Roth, M. J., Kana, A. & Droste, K., 2017, Proceedings of the 16th International Conference on Computer and IT Applications in the Maritime Industries COMPIT'17. Bertram, V. (ed.). Hamburg: Technische Universität Hamburg-Harburg, p. 201-211

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  102. Are the new fuel-efficient bulkers a threat to the old fleet?

    Pruijn, J., 2017, In : Maritime Business Review. 2, 3, p. 224-246

    Research output: Contribution to journalArticleScientificpeer-review

  103. Automatic production planning for the construction of complex ships

    Rose, C., 2017, 165 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  104. Critical collapse pressure of flexible risers in deep/ ultra-deep water: a literature review

    Li, X., Jiang, X. & Hopman, H., 2017, Proceedings of the 22th International Conference on Material Handling, Construction and Logistics (MHCL’17). Belgrade, Serbia: FME Belgrade, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 Next

ID: 22286