1. 2020
  2. A Markovian approach to power generation capacity assessment of floating wave energy converters

    Arzaghi, E., Abaei, M. M., Abbassi, R., O'Reilly, M., Garaniya, V. & Penesis, I., 2020, In : Renewable Energy. 146, p. 2736-2743

    Research output: Contribution to journalArticleScientificpeer-review

  3. An investigation on the circumferential surface crack growth in steel pipes subjected to fatigue bending

    Li, Z., Jiang, X., Hopman, H., Zhu, L. & Liu, Z., 2020, In : Theoretical and Applied Fracture Mechanics. 105, 14 p., 102403.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Assessing complex failure scenarios of on-board distributed systems using a Markov chain

    Habben Jansen, A., Duchateau, E. A. E., Kana, A. A. & Hopman, J. J., 2020, In : Journal of Marine Engineering and Technology. 19, Sup1, p. 45-61

    Research output: Contribution to journalArticleScientificpeer-review

  5. Dynamic simulation of a vessel drive system with dual fuel engines and energy storage

    Mestemaker, B. T. W., Goncalves Castro, M. B., van den Heuvel, H. N. & Visser, K., 2020, In : Energy. 194, 13 p., 116792.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Naval Engineering and Ship Control Special Edition Editorial

    Geertsma, R. D., 2020, In : Journal of Marine Engineering and Technology. 19, Sup1, p. 1-4

    Research output: Contribution to journalEditorialScientificpeer-review

  7. On adaptive sliding mode control without a priori bounded uncertainty

    Roy, S., Baldi, S. & Fridman, L. M., 2020, In : Automatica. 111, 6 p., 108650.

    Research output: Contribution to journalArticleScientificpeer-review

  8. On reliability challenges of repairable systems using hierarchical bayesian inference and maximum likelihood estimation

    BahooToroody, A., Abaei, M. M., Arzaghi, E., Song, G., De Carlo, F., Paltrinieri, N. & Abbassi, R., 2020, In : Process Safety and Environmental Protection. 135, p. 157-165

    Research output: Contribution to journalArticleScientificpeer-review

  9. Predicting the wet collapse pressure for flexible risers with initial ovalization and gap: An analytical solution

    Li, X., Jiang, X. & Hopman, H., 2020, In : Marine Structures. 71, 14 p., 102732.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Solid oxide fuel cells for ships: System integration concepts with reforming and thermal cycles

    van Biert, L., 2020, 229 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  11. Towards structure-independent stabilization for uncertain underactuated Euler–Lagrange systems

    Roy, S. & Baldi, S., 2020, In : Automatica. 113, 8 p., 108775.

    Research output: Contribution to journalArticleScientificpeer-review

  12. 2019
  13. Intrinsic methane steam reforming kinetics on nickel-ceria solid oxide fuel cell anodes

    van Biert, L., Visser, K. & Aravind, P. V., 15 Dec 2019, In : Journal of Power Sources. 443, 12 p., 227261.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Evaluation of Hybrid Electric Turbocharging for Medium Speed Engines

    Mestemaker, B., Westhoeve, J. & Visser, K., 9 Sep 2019, In : SAE Technical Papers. 2019-September, September

    Research output: Contribution to journalConference articleScientificpeer-review

  15. Sustainable product-package design in a food supply chain: A multi-criteria life cycle approach

    Rezaei, J., Papakonstantinou, A., Tavasszy, L., Pesch, U. & Kana, A., Feb 2019, In : Packaging Technology and Science. 32, 2, p. 85-101 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. A Markov-based vulnerability assessment for the design of on-board distributed systems in the concept phase

    Habben Jansen, A. C., Kana, A. A. & Hopman, J. J., 2019, In : Ocean Engineering. 190, 11 p., 106448.

    Research output: Contribution to journalArticleScientificpeer-review

  17. A Multi-Scenario Simulation Transport Model to Assess the Economics of Semi-Autonomous Platooning Concepts

    Colling, A. & Hekkenberg, R., 2019, Proceedings of the 18th Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2019). p. 132-145

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. A Study of Ship’s Frictional Resistance in Extremely Shallow Water

    Zeng, Q., Hekkenberg, R. & Thill, C., 2019, Proceedings ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering . ASME, Vol. 2. 11 p. OMAE2019-95076

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. A design flow of rudder configurations based on maneuvering simulations

    Liu, J., Hekkenberg, R. & Li, S., 2019, In : Journal of Ship Research.

    Research output: Contribution to journalArticleScientificpeer-review

  20. A method to improve the prediction of ship resistance in shallow water

    Zeng, Q., 2019, 167 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  21. A new continuous-time stability perspective of time-delay control: Introducing a state-dependent upper bound structure

    Roy, S., Lee, J. & Baldi, S., 2019, In : IEEE Control Systems Letters. 3, 2, p. 475-480

    Research output: Contribution to journalArticleScientificpeer-review

  22. A simultaneous adaptation law for a class of nonlinearly-parametrized switched systems

    Roy, S. & Baldi, S., 2019, In : IEEE Control Systems Letters. 3, 3, p. 487-492

    Research output: Contribution to journalArticleScientificpeer-review

  23. An Expert System for Cost Estimation of Shipyard Steel Assembly

    Deul, M., Hoek, B. J., Moussault, S., Nijdam, A-L., Alblas, G. & Hekkenberg, R., 2019, Proceedings of the 18th Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2019). p. 213-223

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. An agent-based simulation model for the crowd on passenger ships

    Kana, A. A., Li, Y., Atasoy, B. & Cai, W., 2019, Proceedings of the 19th International Conference on Computer Applications in Shipbuilding, ICCAS 2019. Royal Institution of Naval Architects, Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. An analytical approach for predicting the collapse pressure of the flexible risers withinitial ovalization and gap

    Li, X., Jiang, X. & Hopman, H., 2019, Proceedings of the ASME 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019): Volume 5A: Pipelines, Risers, and Subsea Systems. New York, NY, USA: ASME, 8 p. OMAE2019-95642

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Assessment of the Required Subdivision Index for Autonomous Ships based on Equivalent Safety

    de Vos, J. & Hekkenberg, R., 2019, Proceedings of the International Seminar on Safety and Security of Autonomous Vessels (ISSAV) and European STAMP Workshop and Conference (ESWC) 2019. Valdez Banda, O. A., Kujala, P., Hirdaris, S. & Basnet, S. (eds.). Sciendo, p. 14-23

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Autonomous control for adaptive ships: with hybrid propulsion and power generation

    Geertsma, R., 2019, 271 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  28. Case study: Wind-assisted ship propulsion performance prediction, routing, and economic modelling

    van der Kolk, N., Bordogna, G., Mason, J. C., Desprairies, P. & Vrijdag, A., 2019, Proceedings of the International Conference Power & Propulsion Alternatives for Ships . London, UK: The Royal Institution of Naval Architects - RINA, 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Design of level of service on facilities for crowd evacuation using genetic algorithm optimization

    Li, Y., Cai, W. & Kana, A. A., 2019, In : Safety Science. 120, p. 237-247

    Research output: Contribution to journalArticleScientificpeer-review

  30. Distributed Model Predictive Control for cooperative floating object transport with multi-vessel systems

    Chen, L., Hopman, H. & Negenborn, R. R., 2019, In : Ocean Engineering. 191, 16 p., 106515.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Dynamic modelling of a direct internal reforming solid oxide fuel cell stack based on single cell experiments

    van Biert, L., Godjevac, M., Visser, K. & Aravind, P. V., 2019, In : Applied Energy. 250, p. 976-990

    Research output: Contribution to journalArticleScientificpeer-review

  32. Energy effectiveness of ocean-going cargo ship under various operating conditions

    Sui, C., Stapersma, D., Visser, K., de Vos, P. & Ding, Y., 2019, In : Ocean Engineering. 190, 18 p., 106473.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Evaluation of an equivalent design wave method to define lifetime combined loading scenarios for trimarans

    Seyffert, H. C. & Kana, A. A., 2019, Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering: Volume 3: Structures, Safety, and Reliability. New York, NY, USA: ASME, 10 p. OMAE 2019-95497

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Experimental investigations of marine diesel engine performance against dynamic back pressure at varying sea-states due to underwater exhaust systems

    Sapra, H. D., Singh, J., Dijkstra, C., de Vos, P. & Visser, K., 2019, Proceedings ASME 2019 Internal Combustion Engine Division Fall Technical Conference. New York, NY, USA: ASME, 12 p. ICEF2019-7216

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Exploration of a systems and control approach to reduce propeller cavitation in a seaway

    Vrijdag, A. & Schuttevaer, D., 2019, In : Ocean Engineering. 182, p. 174-187

    Research output: Contribution to journalArticleScientificpeer-review

  36. Influence of inland vessel stern shape aspects on propulsive performance: Derivation of insights and guidelines based on a computational study

    Rotteveel, E., 2019, Delft: Delft University of Technology. 163 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  37. Introducing operational information into early stage ship design using queueing networks

    Droste, K., Hopman, J. J., Kana, A. A. & van Oers, B. J., 2019, Proceedings of the 19th International Conference on Computer Applications in Shipbuilding, ICCAS 2019. Royal Institution of Naval Architects, Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Joint estimation of vessel position and mooring stiffness during offshore crane operations

    Ye, J., Godjevac, M., Baldi, S. & Hopman, H., 2019, In : Automation in Construction. 101, p. 218-226 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. New design methodology for adaptive switching gain based discrete-time sliding mode control

    Sharma, N. K., Roy, S. & Janardhanan, S., 2019, In : International Journal of Control. 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Numerical analysis on the SIF of internal surface cracks in steel pipes reinforced with CRS subjected to bending

    Li, Z., Jiang, X. & Hopman, H., 2019, In : Ships and Offshore Structures. 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Numerical investigation on surface crack growth in steel plates repaired with carbon fiber-reinforced polymer

    Li, Z., Jiang, X. & Hopman, H., 2019, Proceedings of the ASME 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2019): Volume 4: Materials Technology. New York, NY, USA: ASME, 8 p. OMAE2019-95746

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Observer-based robust control for dynamic positioning of large-scale heavy lift vessels

    Ye, J., Roy, S., Godjevac, M. & Baldi, S., 2019, In : IFAC-PapersOnLine. 52, 3, p. 138-143

    Research output: Contribution to journalConference articleScientificpeer-review

  43. On reduced-complexity robust adaptive control of switched Euler–Lagrange systems

    Roy, S. & Baldi, S., 2019, In : Nonlinear Analysis: Hybrid Systems. 34, p. 226-237

    Research output: Contribution to journalArticleScientificpeer-review

  44. On the viscous resistance of ships sailing in shallow water

    Zeng, Q., Hekkenberg, R. & Thill, C., 2019, In : Ocean Engineering. 190, 13 p., 106434.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Optimizing inventory strategy for modular shipbuilding

    van der Beek, T., van Essen, T., Pruijn, J., Aardal, K. & Hopman, H., 2019, 19th International Conference on Computer Applications in Shipbuilding (ICCAS 2019). Royal Institution of Naval Architects, p. 165-172

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Overcoming the Underestimation and Overestimation Problems in Adaptive Sliding Mode Control

    Roy, S., Roy, S. B., Lee, J. & Baldi, S., 2019, In : IEEE/ASME Transactions on Mechatronics. 24, 5, p. 2031-2039

    Research output: Contribution to journalArticleScientificpeer-review

  47. Semi-automated approach for detailed layout generation during early stage surface warship design

    le Poole, J., Hopman, J. J., Kana, A. A., Duchateau, E. A. E. & van Oers, B. J., 2019, Proceedings of the 19th International Conference on Computer Applications in Shipbuilding, ICCAS 2019. Royal Institution of Naval Architects, Vol. 2.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Shallow water effects on ship-generated waves

    Zeng, Q., Thill, C. & Hekkenberg, R., 2019, Proceedings of the 5th MASHCON: International Conference on Ship Manoeuvring in Shallow and Confined Water with non-exclusive focus on manoeuvring in waves, wind and current. Candries, M., Lataire, E., Eloot, K. & Delefortrie, G. (eds.). Ghent University, p. 523-534

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Towards Unmanned Cargo-Ships: The Effects of Automating Navigational Tasks on Crewing Levels

    Kooij, C. & Hekkenberg, R., 2019, Proceedings of the 18th Conference on Computer Applications and Information Technology in the Maritime Industries (COMPIT 2019). p. 104-117

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. 2018
  51. A benchmark test of ship resistance in extremely shallow water

    Zeng, Q., Thill, C. & Hekkenberg, R., 2018, Progress in Maritime Technology and Engineering: Proceedings of the 4th International Conference on Maritime Technology and Engineering (MARTECH 2018). Guedes Soares, C. & Santos, T. A. (eds.). Leiden, The Netherlands: CRC Press / Balkema - Taylor & Francis Group, p. 221-229

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. A modification of the ITTC57 correlation line for shallow water

    Zeng, Q., Thill, C., Hekkenberg, R. & Rotteveel, E., 2018, In : Journal of Marine Science and Technology (Japan). 24 (2019), 2, p. 642-657

    Research output: Contribution to journalArticleScientificpeer-review

  53. A review on predicting critical collapse pressure of flexible risers for ultra-deep oil and gas production

    Li, X., Jiang, X. & Hopman, H., 2018, In : Applied Ocean Research. 80, p. 1-10

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next

ID: 22286