1. 2010
  2. Chloride ingress in cracked concrete - a literature review

    Savija, B. & Schlangen, E., 2010, Advances in concrete service life: Proceedings of 4th RILEM PhD workshop. Andrade, C. & Gulikers, J. (eds.). Bagneux, France: Rilem, p. 133-142 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  3. 2011
  4. Simulation of cracking process in RL1 and RG8

    Savija, B. & Schlangen, E., 2011, p. 168-169. 2 p.

    Research output: Contribution to conferenceAbstractScientific

  5. 2012
  6. Assessment of critical chloride content in reinforced concrete by energy dispersive spectrometry (EDS) revisited

    Pacheco Farias, J., Copuroglu, O., Savija, B., Schlangen, E. & Polder, RB., 2012, Concrete repair, rehabilitation and retrofitting III: 3rd International conference on concrete repair, rehabilitation and retrofitting, ICCRRR-3. Alexander, MG., Beusheusen, HD., Dehn, F. & Moyo, P. (eds.). London: CRC Press, p. 511-516 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  7. Lattice model as a tool for modelling transport phenomena in cement based composites

    Savija, B., Pacheco Farias, J., Polder, RB. & Schlangen, E., 2012, Numerical modeling strategies for sustainable concrete structures. Rossi, P. & Tailhan, JL. (eds.). s.l.: s.n., p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  8. Meso-scale simulation of chloride ingress in cracked concrete

    Savija, B., Pacheco Farias, J., Schlangen, E. & Polder, RB., 2012, RILEM Proceedings pro083 : Microstructural-related durability of cementitious composites, Second International Conference on Microstructural-related Durability of cementitious composites. Ye, G., van Breugel, K., Sun, W. & Miao, C. (eds.). Bagneux: RILEM publications S.A.R.L, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  9. Modeling water absorption of the concrete substrate in concrete repairs

    Lukovic, M., Savija, B., Ye, G. & Zhou, J., 2012, Concrete repair, rehabilitation and retrofitting III: 3rd International conference on concrete repair, rehabilitation and retrofitting, ICCRRR-3. Alexander, MG., Beusheusen, HD., Dehn, F. & Moyo, P. (eds.). London: CRC Press, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  10. Modelling chloride diffusion in cracked concrete: A lattice approach

    Savija, B. & Schlangen, HEJG., 2012, International phd student workshop on durability of reinforced concrete; From composition to service life design. Ferreira, RM., Gulikers, J. & Andrade, C. (eds.). Espoo: VTT Technical Research Center, p. 40-49 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. Modified wedge splitting test (MWST)¿a simple tool for durability investigations of reinforcement corrosion in cracked concrete

    Savija, B., Schlangen, E., Pacheco Farias, J. & Polder, RB., 2012, Concrete repair, rehabilitation and retrofitting III: 3rd International conference on concrete repair, rehabilitation and retrofitting, ICCRRR-3. Alexander, MG., Beusheusen, HD., Dehn, F. & Moyo, P. (eds.). London: CRC Press, p. 386-391 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  12. Relationship between cracking and electrical resistance in reinforced and unreinforced concrete

    Pacheco Farias, J., Savija, B., Schlangen, E. & Polder, RB., 2012, RILEM Proceedings pro083 : Microstructural-related durability of cementitious composites, second international conference on microstructural-related durability of cementitious composites. Guang, Y., van Breugel, K., Sun, W. & Miao, C. (eds.). Bagneux: Rilem, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. 2013
  14. Cracking of the concrete cover due to reinforcement corrosion: A two-dimensional lattice model study

    Savija, B., Lukovic, M., Pacheco Farias, J. & Schlangen, E., 2013, In : Construction and Building Materials. 44, July, p. 626-638 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Experimental and numerical investigation of chloride ingress in cracked concrete

    Savija, B. & Schlangen, E., 2013, p. 33-34. 2 p.

    Research output: Contribution to conferenceAbstractScientific

  16. Impact of surface roughness on the debonding mechanism in concrete repairs

    Lukovic, M., Schlangen, E., Ye, G. & Savija, B., 2013, FraMCoS-8: Fracture mechanics of concrete and concrete structures. van Mier, JGM., Ruiz, G., Andrade, C., Yu, RC. & Zhang, XX. (eds.). Barcelona: International Center for Numerical Methods in Engineering (CIMNE), p. 611-621 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  17. Lattice based simulation of chloride ingress in uncracked and cracked concrete: Model validation

    Savija, B., Pacheco Farias, J. & Schlangen, E., 2013, Proceedings of the VIII International conference on fracture mechanics of concrete and concrete structures. Mier, JGM., Ruiz, G., Andrade, C., Yu, RC. & Zhang, X. (eds.). s.l.: s.n., p. 1941-1952 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  18. Lattice modeling of chloride diffusion in sound and cracked concrete

    Savija, B., Pacheco Farias, J. & Schlangen, E., 2013, In : Cement and Concrete Composites. 42, September, p. 30-40 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Lattice modeling of cover cracking due to reinforcement corrosion

    Savija, B., Lukovic, M. & Schlangen, HEJG., 2013, International conference on concrete under severe conditions - environment and loading. Li, ZJ., Sun, W., Miao, CW., Sakai, K., Gjorv, OE. & Banthia, N. (eds.). Bagneux: Rilem, p. 1151-1163 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  20. Micromechanical study of the interface properties of concrete repair systems

    Lukovic, M., Savija, B., Schlangen, E. & Ye, G., 2013, International conference on concrete under severe conditions - environment and loading. Li, ZJ., Sun, W., Miao, CW., Sakai, K., Gjorv, OE. & Banthia, N. (eds.). Bagneux: Rilem, p. 1685-1698 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  21. Traffic-induced vibrations of frame structures

    Nefovska-Danilovic, M., Petronijevic, M. & Savija, B., 2013, In : Canadian Journal of Civil Engineering. 40, 2, p. 158-171 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. 2014
  23. A modelling study of drying shrinkage damage in concrete repair systems

    Lukovic, M., Savija, B., Schlangen, E., Ye, G. & van Breugel, K., 2014, Proceedings of the structural faults and repair conference 2014. Forde, MC. (ed.). s.l.: The Electrochemical Society, p. 1-18 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Assessment of cracks in reinforced concrete by means of electrical resistance and image analysis

    Pacheco Farias, J., Savija, B., Schlangen, E. & Polder, RB., 2014, In : Construction and Building Materials. 65, August, p. 417-426 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Chloride ingress in cracked concrete studied using laser induced breakdown spectroscopy

    Savija, B., Pacheco Farias, J., Schlangen, E., Millar, S., Eichler, T. & Wilsch, G., 2014, Proceedings of the 1st international conference on ageing of materials and structures, AMS'14. van Breugel, K. & Koenders, EAB. (eds.). Delft: DCMat Ageing Centre, p. 140-146 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  26. Chloride ingress in cracked concrete: a laser induced breakdown spectroscopy (LIBS) study

    Savija, B., Schlangen, E., Pacheco Farias, J., Millar, S., Eichler, T. & Wilsch, G., 2014, In : Journal of Advanced Concrete Technology. 12, 10, p. 425-442 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Corrosion of steel in cracked concrete: A microscale study

    Pacheco Farias, J., Savija, B., Schlangen, E. & Polder, RB., 2014, Concrete solutions 2014. Grantham, M., Basheer, PAM., Magee, B. & Soutsos, M. (eds.). Boca Raton: CRC Press, p. 551-557 818 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  28. Damage induced by continued corrosion in concrete repair systems

    Lukovic, M., Savija, B., Schlangen, E. & Ye, G., 2014, Proceedings of the 3rd international RILEM conference on strain hardening cementitious composites (SHCC3-Delft). Schlangen, E., Sierra Beltran, MG., Lukovic, M. & Ye, G. (eds.). Delft: Delft University of Technology, p. 269-277 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. Experimental and numerical investigation of chloride ingress in cracked concrete

    Savija, B., 2014, Delft: Branko Savija. 213 p.

    Research output: ThesisDissertation (TU Delft)

  30. Lattice modeling of rapid chloride migration in concrete

    Savija, B., Lukovic, M. & Schlangen, E., 2014, In : Cement and Concrete Research. 61-62, July-August, p. 49-63 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Micromechanical study of the interface properties in concrete repair systems

    Lukovic, M., Savija, B., Dong, H., Schlangen, E. & Ye, G., 2014, In : Journal of Advanced Concrete Technology. 12, 9, p. 320-339 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Modeling of concrete cover cracking due to reinforcement corrosion

    Savija, B., Pacheco Farias, J., Lukovic, M. & Schlangen, E., 2014, In : Studi E Recerche. 33, p. 63-84 22 p.

    Research output: Contribution to journalArticleProfessional

  33. Modeling the rapid chloride migration test for concrete using the lattice model and characteristic Galerkin approach

    Savija, B., Lukovic, M. & Schlangen, E., 2014, Proceedings of EURO-C 2014. Bicanic, N., Mang, H., Meschke, G. & de Borst, R. (eds.). Buca Raton: CRC Press, p. 629-638 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  34. Numerical study of a strain hardening cementitious composite overlay system for durable concrete repair

    Lukovic, M., Schlangen, E., Savija, B., Ye, G. & van Breugel, K., 2014, Proceedings of EURO-C 2014. Bicanic, N., Mang, H., Meschke, G. & de Borst, R. (eds.). Buca Raton: CRC Press, p. 827-836 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  35. Performance assessment of cracks in reinforced concrete: from crack width to crack volume

    Pacheco Farias, J., Savija, B., Schlangen, E. & Polder, RB., 2014, RILEM International workshop on performance-based specification and control of concrete durability. Bjegovic, D. & Beushausen, H. (eds.). Bagneux: Rilem, p. 419-426 675 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  36. Tailoring strain-hardening cementitious composite repair systems through numerical experimentation

    Lukovic, M., Dong, H., Savija, B., Schlangen, E., Ye, G. & van Breugel, K., 2014, In : Cement and Concrete Composites. 53, p. 200-213 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. 2015
  38. Corrosion induced cover cracking studied by X-ray computed tomography, nanoindentation, and energy dispersive X-ray spectrometry (EDS)

    Savija, B., Lukovic, M., Hosseini, SAS., Pacheco Farias, J. & Schlangen, E., 2015, In : Materials and Structures. 48, 7, p. 2043-2062 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Drying shrinkage damage in concrete repair systems: A 3D modelling study

    Lukovic, M., Savija, B., Schlangen, E. & Ye, G., 2015, Proceedings of the 10th international conference on mechanics and physics of creep, shrinkage, and durability of concrete and concrete structures, CONCREEP 10. Hellmich, C., Pichler, B. & Kollegger, J. (eds.). Reston: American Society of Civil Engineers (ASCE), p. 422-425 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  40. Experimental and numerical study of water uptake in strained SHCC

    Savija, B., Lukovic, M. & Schlangen, E., 2015, Proceedings of the 10th international conference on mechanics and physics of creep, shrinkage, and durability of concrete and concrete structures, CONCREEP 10. Hellmich, C., Pichler, B. & Kollegger, J. (eds.). Reston: American Society of Civil Engineers (ASCE), p. 404-407 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  41. Experimentally informed multi-scale modelling of size effect and fracture in porous graphite

    Savija, B., Smith, GE., Liu, D., Schlangen, E. & Flewitt, P. E. J., 2015, Proceedings of the 23rd conference on structural mechanics in reactor technology, SMIRT-2. Davies, C., Keim, E., Kim, YJ. & Mathet, E. (eds.). Raleigh: IASMIRT, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  42. Modelling the influence of cracking and healing on modal properties of concrete beams

    Savija, B. & Schlangen, E., 2015, Proceedings of the 5th international conference on self-healing materials, ICSHM 2015. Reichert, M. (ed.). Durham: Duke University, p. 1-4 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  43. Multi-scale characterization and modelling of damage evolution in nuclear Gilsocarbon graphite

    Liu, D., Heard, P., Savija, B., Smith, G., Schlangen, E. & Flewitt, P., 2015, Proceedings of the 2015 MRS spring meeting. Zhang, YF., Deo, C., Soisson, F. & Andersson, D. (eds.). Cambridge: Materials Research Society, p. 1-6 6 p. (Materials Research Society Symposium Proceedings; vol. 1809).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  44. Nano-indentation testing and modelling of cement paste

    Schlangen, E., Lukovic, M., Savija, B. & Copuroglu, O., 2015, Proceedings of the 10th international conference on mechanics and physics of creep, shrinkage, and durability of concrete and concrete structures, CONCREEP 10. Hellmich, C., Pichler, B. & Kollegger, J. (eds.). Reston: American Society of Civil Engineers (ASCE), p. 1028-1031 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  45. On the Use of a Lattice Model for Analyzing of In-Plane Vibration of Thin Plates

    Savija, B. & Schlangen, E., 2015, In : CMC Computer, Materials and Continua. 48, 3, p. 181-202 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Using nano-indentation and microscopy to obtain mechanical properties

    Lukovic, M., Schlangen, E., Savija, B., Ye, G. & Copuroglu, O., 2015, Proceedings of the 15th Euroseminar on microscopy applied to building materials. Copuroglu, O. (ed.). Delft: Delft University of Technology, p. 121-127 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  47. 2016
  48. An experimental and modelling evaluation of the deformation and fracture of quasi-brittle reticulated vitreous carbon foam

    Heard, P., Savija, B., Liu, D., Smith, GE., Hallam, KR., Schlangen, E. & Flewitt, P. E. J., 2016, 17th International Conference on Experimental Mechanics (ICEM 17): July 3-7, 2016, Rhodes, Greece. Gdoutos, E. E. (ed.). 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  49. Autogeneous healing and chloride ingress in cracked concrete

    Savija, B. & Schlangen, E., 2016, In : Heron. 61, 1, p. 15-32 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Cracking of SHCC due to reinforcement corrosion

    Savija, B., Luković, M., Pacheco Farias, J. & Schlangen, E., 2016, 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures: Berkeley, USA. Saouma, V., Bolander, J. & Landis, E. (eds.). Ia-FraMCos, p. 1-12 12 p. FraMCoS-9

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  51. Experimentally informed multi-scale modelling of mechanical properties of quasi-brittle nuclear graphite

    Savija, B., Liu, D., Smith, S., Hallam, KR., Schlangen, E. & Flewitt, P. E. J., 2016, In : Engineering Fracture Mechanics. 153, March, p. 360-377 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Influence of Cracking on Moisture Uptake in Strain-Hardening Cementitious Composites

    Savija, B., Lukovic, M. & Schlangen, E., 2016, In : Journal of Nanomechanics and Micromechanics. p. 1-8 04016010.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Microscale Testing and Modelling of Cement Paste as Basis for Multi-Scale Modelling

    Zhang, H., Savija, B., Chaves Figueiredo, S., Lukovic, M. & Schlangen, E., 2016, In : Materials. 9, 11, 14 p., 907.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Use of phase change materials (PCMs) to mitigate early age thermal cracking in concrete: Theoretical considerations

    Savija, B. & Schlangen, E., 2016, In : Construction and Building Materials. 126, p. 332-344

    Research output: Contribution to journalArticleScientificpeer-review

  55. Carbonation of cement paste: Understanding, challenges, and opportunities

    Savija, B. & Luković, M., 14 May 2016, In : Construction and Building Materials. 117, August, p. 285-301 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. A 3D Lattice Modelling Study of Drying Shrinkage Damage in Concrete Repair Systems

    Luković, M., Savija, B., Schlangen, E., Ye, G. & van Breugel, K., 14 Jul 2016, In : Materials. 9, 19 p., 575.

    Research output: Contribution to journalArticleScientificpeer-review

  57. 2017
  58. Development of ductile cementitious composites incorporating microencapsulated phase change materials

    Savija, B., Lukovic, M., Kotteman, G., Chaves Figueiredo, S., França de Mendonça Filho, F. & Schlangen, E., 2017, In : International Journal of Advances in Engineering Sciences and Applied Mathematics. 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Experimentally validated multi-scale modelling scheme of deformation and fracture of cement paste

    Zhang, H., Šavija, B., Figueiredo, S. C. & Schlangen, E., 2017, In : Cement and Concrete Research. 102, p. 175-186

    Research output: Contribution to journalArticleScientificpeer-review

  60. Failure Modes in Concrete Repair Systems due to Ongoing Corrosion

    Lukovic, M., Savija, B., Ye, G., Schlangen, E. & van Breugel, K., 2017, In : Advances in Materials Science and Engineering. 14 p., 9649187.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Mechanical properties of ductile cementitious composites incorporating microencapsulated phase change materials

    Schlangen, E., Savija, B., Figueiredo, S. C., França de Mendonça Filho, F. & Luković, M., 2017, International Conference on Strain-Hardening Cement-Based Composites : SHCC 2017: Strain-Hardening Cement-Based Composites. Kabele, P., Mechtcherine, V. & Slowik, V. (eds.). Vol. 15. p. 115-122 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  62. Simulation-Aided Design of Tubular Polymeric Capsules for Self-Healing Concrete

    Savija, B., Feiteira, J., Araújo, M., Chatrabhuti, S., Raquez, JM., van Tittelboom, K., Gruyaert, E., de Belie, N. & Schlangen, E., 2017, In : Materials. 10, 1, p. 1-13 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. The evaluation of deformation and fracture of Gilsocarbon graphite subject to service environments: Experimental and modelling

    Savija, B., Smith, G. E., Heard, P. J., Sarakinou, E., Darnbrough, J. E., Hallam, K. R., Schlangen, E. & Flewitt, P. E. J., 2017, Advances in Fracture and Damage Mechanics XVI - 16th FDM. Trans Tech Publications, Vol. 754 KEM. p. 91-94 4 p. (Key Engineering Materials; vol. 754 KEM).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  64. Towards understanding the influence of porosity on mechanical and fracture behaviour of quasi-brittle materials: Experiments and modelling

    Liu, D., Savija, B., Smith, G. E., Flewitt, P. E. J., Lowe, T. & Schlangen, E., 2017, In : International Journal of Fracture. 205, p. 57-72 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Influence of microencapsulated phase change material (PCM) addition on (micro) mechanical properties of cement paste

    Šavija, B., Zhang, H. & Schlangen, E., 27 Jul 2017, In : Materials. 10, 8, p. 1-18 863.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Design and testing of tubular polymeric capsules for self-healing of concrete

    Araújo, M., van Tittelboom, K., Feiteira, J., Gruyaert, E., Chatrabhuti, S., Raquez, J. M., Savija, B., Alderete, N., Schlangen, E. & de Belie, N., 25 Oct 2017, 3rd International Conference on Innovative Materials, Structures and Technologies (IMST 2017). Vol. 251. 9 p. (IOP Conference Series: Materials Science and Engineering; vol. 251).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  67. 2018
  68. Engineering Properties of Concrete with Waste Recycled Plastic: A Review

    Babafemi, A. J., Šavija, B., Chandra Paul, S. & Anggraini, V., 2018, In : Sustainability. 10, 11, 26 p.

    Research output: Contribution to journalReview articleScientificpeer-review

  69. Flexural response of cementitious mortar bars reinforced by 3D printed polymeric mesh

    Huigen, V., Xu, Y., Schlangen, E. & Šavija, B., 2018, 4th International Conference on Service Life Design for Infrastructures: (SLD4) 27-30 August 2018 – Delft, Netherlands. Ye, G., Yuan, Y., Rodriguez, C. R., Zhang, H. & Šavija, B. (eds.). Rilem, p. 750-757 (Rilem proceedings; no. PRO 125).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  70. Micromechanical modelling of cement paste using X-ray computed tomography and statistical nanoindentation

    Zhang, H., Šavija, B. & Schlangen, E., 2018, Proceedings of the Symposium on Concrete Modelling: CONMOD2018 27-30 August 2018 – Delft, Netherlands. Schlangen, E., de Schutter, G., Šavija, B., Zhang, H. & Romero Rodriguez, C. (eds.). Rilem, Vol. PRO 127. p. 231-234 (Rilem proceedings; no. PRO 127).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  71. Modelling of deformation and fracture for a model quasi-brittle material with controlled porosity: Synthetic versus real microstructure

    Šavija, B., Smith, G. E., Liu, D., Schlangen, E. & Flewitt, P. E. J., 2018, In : Engineering Fracture Mechanics. 205, 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Modelling strategies for the study of crack self-sealing in mortar with superabsorbent polymers

    Romero Rodriguez, C., Chaves Figueiredo, S., Snoeck, D., Šavija, B. & Schlangen, E., 2018, Proceedings of the Symposium on Concrete Modelling: CONMOD2018 27-30 August 2018 – Delft, Netherlands. Schlangen, E., de Schutter, G., Šavija, B., Zhang, H. & Romero Rodriguez, C. (eds.). Rilem, Vol. PRO 127. p. 333-341 (Rilem proceedings; no. PRO 127).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  73. Piezoresistive properties of cementitious composites reinforced by PVA fibres

    Figueiredo, S. C., Çopuroğlu, O., Šavija, B. & Schlangen, E., 2018, International Conference on Strain-Hardening Cement-Based Composites : SHCC 2017: Strain-Hardening Cement-Based Composites. Mechtcherine, V., Slowik, V. & Kabele, P. (eds.). Springer, Vol. 15. p. 709-717 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  74. Size effect on splitting strength of hardened cement paste: Experimental and numerical study

    Zhang, H., Šavija, B., Xu, Y. & Schlangen, E., 2018, In : Cement and Concrete Composites. 94, p. 264-276

    Research output: Contribution to journalArticleScientificpeer-review

  75. Smart Crack Control in Concrete through Use of Phase Change Materials (PCMs): A Review

    Šavija, B., 2018, In : Materials. 11, 5, 31 p., 654.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Static and Fatigue Tests on Cementitious Cantilever Beams Using Nanoindenter

    Gan, Y., Zhang, H., Šavija, B., Schlangen, E. & van Breugel, K., 2018, In : Micromachines. 9, 12, 15 p., 630.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Combined experimental and numerical study on micro-cube indentation splitting test of cement paste

    Zhang, H., Šavija, B. & Schlangen, E., 1 Jan 2018, In : Engineering Fracture Mechanics.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Modelling deformation and fracture of Gilsocarbon graphite subject to service environments

    Savija, B., Smith, G. E., Heard, P. J., Sarakinou, E., Darnbrough, J. E., Hallam, K. R., Schlangen, E. & Flewitt, P. E. J., 1 Feb 2018, In : Journal of Nuclear Materials. 499, p. 18-28 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Effect of natural carbonation on the pore structure and elastic modulus of the alkali-activated fly ash and slag pastes

    Nedeljkovic, M., Savija, B., Zuo, Y., Luković, M. & Ye, G., 10 Feb 2018, In : Construction and Building Materials. 161, p. 687-704 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Testing and modelling of micro cement paste cube under indentation splitting

    Zhang, H., Schlangen, E. & Šavija, B., 28 Feb 2018, Computational Modelling of Concrete Structures: Proceedings of the Conference on Computational Modelling of Concrete and Concrete Structures . Meschke, G., Pichler, B. & Rots, J. G. (eds.). CRC Press, p. 121-126

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  81. Towards understanding stochastic fracture performance of cement paste at micro length scale based on numerical simulation

    Zhang, H., Šavija, B. & Schlangen, E., 20 Sep 2018, In : Construction and Building Materials. 183, p. 189-201 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. A comprehensive review on mechanical and durability properties of cement-based materials containing waste recycled glass

    Chandra Paul, S., Šavija, B. & Babafemi, A. J., 10 Oct 2018, In : Journal of Cleaner Production. 198, p. 891-906 16 p.

    Research output: Contribution to journalReview articleScientificpeer-review

  83. 2019
  84. Agricultural Solid Waste as Source of Supplementary Cementitious Materials in Developing Countries

    Paul, S. C., Mbewe, P. B. K., Kong, S. Y. & Šavija, B., 2019, In : Materials. 12, 7, 20 p., 1112.

    Research output: Contribution to journalReview articleScientificpeer-review

  85. Assessing Hydrated Cement Paste Properties Using Experimentally Informed Discrete Models

    Šavija, B., Zhang, H. & Schlangen, E., 2019, In : Journal of Materials in Civil Engineering. 31, 9, 13 p., 04019169.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Combined experimental and numerical study of uniaxial compression failure of hardened cement paste at micrometre length scale

    Zhang, H., Xu, Y., Gan, Y., Chang, Z., Schlangen, E. & Šavija, B., 2019, In : Cement and Concrete Research. 126, 15 p., 105925.

    Research output: Contribution to journalArticleScientificpeer-review

  87. Compression Behaviors Of Cementitious Cellular Composites With Negative Poisson’s Ratio

    Xu, Y., Šavija, B. & Schlangen, E., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  88. Creating Strain Hardening Cementitious Composites (SHCCS) Through Use Of Additively Manufactured Polymeric Meshes As Reinforcement

    Xu, Y., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  89. Development of nano-SiO2 and bentonite-based mortars for corrosion protection of reinforcing steel

    Karunarathne, V. K., Paul, S. C. & Šavija, B., 2019, In : Materials. 12, 16, 14 p., 2622.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Development of strain hardening cementitious composite (SHCC) reinforced with 3D printed polymeric reinforcement: Mechanical properties

    Xu, Y. & Šavija, B., 2019, In : Composites Part B: Engineering. 174, 16 p., 107011.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Experimentally informed fracture modelling of interfacial transition zone at micro-scale

    Zhang, H., Gan, Y., Xu, Y., Zhang, S., Schlangen, E. & Šavija, B., 2019, In : Cement and Concrete Composites. 104, 12 p., 103383.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Frost Damage Progression Studied Through X-Ray tomography In Mortar With Phase Change Materials

    Romero Rodriguez, C., Chaves Figueiredo, S., França de Mendonça Filho, F., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  93. Lattice Model For Numerical Analysis Of Fracture Process Of Concrete Material Under Various Loading Conditions

    Chang, Z., Zhang, H., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  94. Micro-Cantilever Testing Of Cementitious Materials Under Various Loading Conditions

    Gan, Y., Zhang, H., Šavija, B., Schlangen, E. & van Breugel, K., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  95. Numerical investigation of crack self-sealing in cement-based composites with superabsorbent polymers

    Rodríguez, C. R., Figueiredo, S. C., Deprez, M., Snoeck, D., Schlangen, E. & Šavija, B., 2019, In : Cement and Concrete Composites. 104, 12 p., 103395.

    Research output: Contribution to journalArticleScientificpeer-review

  96. On The Role Of Soft Inclusions On The Fracture Behaviour Of Cement Paste

    Mercuri, L., Romero Rodriguez, C., Xu, Y., Chaves Figueiredo, S., Mors, R., Rossi, E., Anglani, G., Antonaci, P., Šavija, B. & Schlangen, E., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  97. The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete

    Panda, B., Noor Mohamed, N. A., Chandra Paul, S., Bhagath Singh, GVP., Tan, M. J. & Šavija, B., 2019, In : Materials. 12, 13, 12 p., 2149.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Thermal response of mortar panels with different forms of macro-encapsulated phase change materials: A finite element study

    Kong, S. Y., Yang, X., Paul, S. C., Wong, L. S. & Šavija, B., 2019, In : Energies. 12, 13, 15 p., 2636.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Use Of X-Ray Computated Tomogrphy As Input For Fracture Modelling Of Cement Paste-Aggregate Interface

    Zhang, H., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  100. Deformation and fracture of 3D printed disordered lattice materials: Experiments and modeling

    Xu, Y., Zhang, H., Šavija, B., Chaves Figueiredo, S. & Schlangen, E., 15 Jan 2019, In : Materials and Design. 162, p. 143-153 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Experimentally informed micromechanical modelling of cement paste: An approach coupling X-ray computed tomography and statistical nanoindentation

    Zhang, H., Šavija, B., Luković, M. & Schlangen, E., 15 Jan 2019, In : Composites Part B: Engineering. 157, p. 109-122 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. 2020
  103. Cementitious cellular composites with auxetic behavior

    Xu, Y., Zhang, H., Schlangen, E., Lukovic, M. & Šavija, B., 2020, In : Cement and Concrete Composites. 111, p. 1-11 11 p., 103624.

    Research output: Contribution to journalArticleScientificpeer-review

  104. Effect of Recycled Iron Powder as Fine Aggregate on the Mechanical, Durability, and High Temperature Behavior of Mortars

    Ali, M. K., Miah, M. J., Paul, S. C., Babafemi, A. J., Kong, S. Y. & Šavija, B., 2020, In : Materials. 13, 5, 19 p., 1168.

    Research output: Contribution to journalArticleScientificpeer-review

  105. Experimentally validated meso-scale fracture modelling of mortar using output from micromechanical models

    Zhang, H., Xu, Y., Gan, Y., Schlangen, E. & Šavija, B., 2020, In : Cement and Concrete Composites. 110, p. 1-12 12 p., 103567.

    Research output: Contribution to journalArticleScientificpeer-review

  106. Fundamental investigation on the frost resistance of mortar with microencapsulated phase change materials

    Romero Rodríguez, C., França de Mendonça Filho, F., Chaves Figueiredo, S., Schlangen, E. & Šavija, B., 2020, In : Cement and Concrete Composites. 113, 12 p., 103705.

    Research output: Contribution to journalArticleScientificpeer-review

  107. Impact of Chemically Treated Waste Rubber Tire Aggregates on Mechanical, Durability and Thermal Properties of Concrete

    Khern, Y. C., Paul, S. C., Kong, S. Y., Babafemi, A. J., Anggraini, V., Miah, M. J. & Šavija, B., 2020, In : Frontiers in Materials. 7, p. 1-11 11 p., 90.

    Research output: Contribution to journalArticleScientificpeer-review

  108. Influence of Micro-Pore Connectivity and Micro-Fractures on Calcium Leaching of Cement Pastes: A Coupled Simulation Approach

    Perko, J., Ukrainczyk, N., Šavija, B., Phung, Q. T. & Koenders, E. A. B., 2020, In : Materials. 13, 12, 22 p., 2697.

    Research output: Contribution to journalArticleScientificpeer-review

  109. Influence of SiO2, TiO2 and Fe2O3 nanoparticles on the properties of fly ash blended cement mortars

    Siang Ng, D., Paul, S. C., Anggraini, V., Kong, S. Y., Qureshi, T. S., Rodriguez, C. R., Liu, Q. F. & Šavija, B., 2020, In : Construction and Building Materials. 258, 11 p., 119627.

    Research output: Contribution to journalArticleScientificpeer-review

  110. Micro-cantilever testing on the short-term creep behaviour of cement paste at micro-scale

    Gan, Y., Vandamme, M., Zhang, H., Chen, Y., Schlangen, E., van Breugel, K. & Šavija, B., 2020, In : Cement and Concrete Research. 134, 11 p., 106105.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 Next

ID: 95471