1. 2020
  2. Effect of Recycled Iron Powder as Fine Aggregate on the Mechanical, Durability, and High Temperature Behavior of Mortars

    Ali, M. K., Miah, M. J., Paul, S. C., Babafemi, A. J., Kong, S. Y. & Šavija, B., 2020, In : Materials. 13, 5, 19 p., 1168.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Experimentally validated meso-scale fracture modelling of mortar using output from micromechanical models

    Zhang, H., Xu, Y., Gan, Y., Schlangen, E. & Šavija, B., 2020, In : Cement and Concrete Composites. 110, p. 1-12 12 p., 103567.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Micromechanical testing and modelling of blast furnace slag cement pastes

    Šavija, B., Zhang, H. & Schlangen, E., 2020, In : Construction and Building Materials. 239, 13 p., 117841.

    Research output: Contribution to journalArticleScientificpeer-review

  5. The influence of defects at the steel/concrete interface for chloride-induced pitting corrosion of naturally-deteriorated 20-years-old specimens studied through X-ray Computed Tomography

    Rossi, E., Polder, R., Copuroglu, O., Nijland, T. & Šavija, B., 2020, In : Construction and Building Materials. 235, 11 p., 117474.

    Research output: Contribution to journalArticleScientificpeer-review

  6. X-Ray Micro Tomography of Water Absorption by Superabsorbent Polymers in Mortar

    Rodriguez, C. R., Deprez, M., de Mendonca Filho, F. F., van Offenwert, S., Cnudde, V., Schlangen, E. & Šavija, B., 2020, SAP 2019: 3rd International Conference on the Application of Superabsorbent Polymers (SAP) and Other New Admixtures Towards Smart Concrete . Boshoff, W. P., Mechtcherine, V., Combrinck, R. & Wyrzykowski, M. (eds.). Springer, p. 29-37 9 p. (RILEM Bookseries; vol. 24).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  7. 2019
  8. Special Issue on Modelling and Simulation for Concrete Durability: Mechanism and Prediction

    Liu, Q., Šavija, B., Xia, J., Lin, X. & Hou, D., May 2019, (In preparation) In : Modelling and Simulation in Engineering.

    Research output: Contribution to journalSpecial issueScientific

  9. Deformation and fracture of 3D printed disordered lattice materials: Experiments and modeling

    Xu, Y., Zhang, H., Šavija, B., Chaves Figueiredo, S. & Schlangen, E., 15 Jan 2019, In : Materials and Design. 162, p. 143-153 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Experimentally informed micromechanical modelling of cement paste: An approach coupling X-ray computed tomography and statistical nanoindentation

    Zhang, H., Šavija, B., Luković, M. & Schlangen, E., 15 Jan 2019, In : Composites Part B: Engineering. 157, p. 109-122 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Agricultural Solid Waste as Source of Supplementary Cementitious Materials in Developing Countries

    Paul, S. C., Mbewe, P. B. K., Kong, S. Y. & Šavija, B., 2019, In : Materials. 12, 7, 20 p., 1112.

    Research output: Contribution to journalReview articleScientificpeer-review

  12. Assessing Hydrated Cement Paste Properties Using Experimentally Informed Discrete Models

    Šavija, B., Zhang, H. & Schlangen, E., 2019, In : Journal of Materials in Civil Engineering. 31, 9, 13 p., 04019169.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Combined experimental and numerical study of uniaxial compression failure of hardened cement paste at micrometre length scale

    Zhang, H., Xu, Y., Gan, Y., Chang, Z., Schlangen, E. & Šavija, B., 2019, In : Cement and Concrete Research. 126, 15 p., 105925.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Compression Behaviors Of Cementitious Cellular Composites With Negative Poisson’s Ratio

    Xu, Y., Šavija, B. & Schlangen, E., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Creating Strain Hardening Cementitious Composites (SHCCS) Through Use Of Additively Manufactured Polymeric Meshes As Reinforcement

    Xu, Y., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Development of nano-SiO2 and bentonite-based mortars for corrosion protection of reinforcing steel

    Karunarathne, V. K., Paul, S. C. & Šavija, B., 2019, In : Materials. 12, 16, 14 p., 2622.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Development of strain hardening cementitious composite (SHCC) reinforced with 3D printed polymeric reinforcement: Mechanical properties

    Xu, Y. & Šavija, B., 2019, In : Composites Part B: Engineering. 174, 16 p., 107011.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Experimentally informed fracture modelling of interfacial transition zone at micro-scale

    Zhang, H., Gan, Y., Xu, Y., Zhang, S., Schlangen, E. & Šavija, B., 2019, In : Cement and Concrete Composites. 104, 12 p., 103383.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Frost Damage Progression Studied Through X-Ray tomography In Mortar With Phase Change Materials

    Romero Rodriguez, C., Chaves Figueiredo, S., França de Mendonça Filho, F., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Lattice Model For Numerical Analysis Of Fracture Process Of Concrete Material Under Various Loading Conditions

    Chang, Z., Zhang, H., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Micro-Cantilever Testing Of Cementitious Materials Under Various Loading Conditions

    Gan, Y., Zhang, H., Šavija, B., Schlangen, E. & van Breugel, K., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Numerical investigation of crack self-sealing in cement-based composites with superabsorbent polymers

    Rodríguez, C. R., Figueiredo, S. C., Deprez, M., Snoeck, D., Schlangen, E. & Šavija, B., 2019, In : Cement and Concrete Composites. 104, 12 p., 103395.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 Next

ID: 95471