1. 2020
  2. Effect of Recycled Iron Powder as Fine Aggregate on the Mechanical, Durability, and High Temperature Behavior of Mortars

    Ali, M. K., Miah, M. J., Paul, S. C., Babafemi, A. J., Kong, S. Y. & Šavija, B., 2020, In : Materials. 13, 5, 19 p., 1168.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Experimentally validated meso-scale fracture modelling of mortar using output from micromechanical models

    Zhang, H., Xu, Y., Gan, Y., Schlangen, E. & Šavija, B., 2020, In : Cement and Concrete Composites. 110, p. 1-12 12 p., 103567.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Micromechanical testing and modelling of blast furnace slag cement pastes

    Šavija, B., Zhang, H. & Schlangen, E., 2020, In : Construction and Building Materials. 239, 13 p., 117841.

    Research output: Contribution to journalArticleScientificpeer-review

  5. The influence of defects at the steel/concrete interface for chloride-induced pitting corrosion of naturally-deteriorated 20-years-old specimens studied through X-ray Computed Tomography

    Rossi, E., Polder, R., Copuroglu, O., Nijland, T. & Šavija, B., 2020, In : Construction and Building Materials. 235, 11 p., 117474.

    Research output: Contribution to journalArticleScientificpeer-review

  6. X-Ray Micro Tomography of Water Absorption by Superabsorbent Polymers in Mortar

    Rodriguez, C. R., Deprez, M., de Mendonca Filho, F. F., van Offenwert, S., Cnudde, V., Schlangen, E. & Šavija, B., 2020, SAP 2019: 3rd International Conference on the Application of Superabsorbent Polymers (SAP) and Other New Admixtures Towards Smart Concrete . Boshoff, W. P., Mechtcherine, V., Combrinck, R. & Wyrzykowski, M. (eds.). Springer, p. 29-37 9 p. (RILEM Bookseries; vol. 24).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  7. 2019
  8. Special Issue on Modelling and Simulation for Concrete Durability: Mechanism and Prediction

    Liu, Q., Šavija, B., Xia, J., Lin, X. & Hou, D., May 2019, (In preparation) In : Modelling and Simulation in Engineering.

    Research output: Contribution to journalSpecial issueScientific

  9. Deformation and fracture of 3D printed disordered lattice materials: Experiments and modeling

    Xu, Y., Zhang, H., Šavija, B., Chaves Figueiredo, S. & Schlangen, E., 15 Jan 2019, In : Materials and Design. 162, p. 143-153 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Experimentally informed micromechanical modelling of cement paste: An approach coupling X-ray computed tomography and statistical nanoindentation

    Zhang, H., Šavija, B., Luković, M. & Schlangen, E., 15 Jan 2019, In : Composites Part B: Engineering. 157, p. 109-122 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Agricultural Solid Waste as Source of Supplementary Cementitious Materials in Developing Countries

    Paul, S. C., Mbewe, P. B. K., Kong, S. Y. & Šavija, B., 2019, In : Materials. 12, 7, 20 p., 1112.

    Research output: Contribution to journalReview articleScientificpeer-review

  12. Assessing Hydrated Cement Paste Properties Using Experimentally Informed Discrete Models

    Šavija, B., Zhang, H. & Schlangen, E., 2019, In : Journal of Materials in Civil Engineering. 31, 9, 13 p., 04019169.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Combined experimental and numerical study of uniaxial compression failure of hardened cement paste at micrometre length scale

    Zhang, H., Xu, Y., Gan, Y., Chang, Z., Schlangen, E. & Šavija, B., 2019, In : Cement and Concrete Research. 126, 15 p., 105925.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Compression Behaviors Of Cementitious Cellular Composites With Negative Poisson’s Ratio

    Xu, Y., Šavija, B. & Schlangen, E., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Creating Strain Hardening Cementitious Composites (SHCCS) Through Use Of Additively Manufactured Polymeric Meshes As Reinforcement

    Xu, Y., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Development of nano-SiO2 and bentonite-based mortars for corrosion protection of reinforcing steel

    Karunarathne, V. K., Paul, S. C. & Šavija, B., 2019, In : Materials. 12, 16, 14 p., 2622.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Development of strain hardening cementitious composite (SHCC) reinforced with 3D printed polymeric reinforcement: Mechanical properties

    Xu, Y. & Šavija, B., 2019, In : Composites Part B: Engineering. 174, 16 p., 107011.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Experimentally informed fracture modelling of interfacial transition zone at micro-scale

    Zhang, H., Gan, Y., Xu, Y., Zhang, S., Schlangen, E. & Šavija, B., 2019, In : Cement and Concrete Composites. 104, 12 p., 103383.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Frost Damage Progression Studied Through X-Ray tomography In Mortar With Phase Change Materials

    Romero Rodriguez, C., Chaves Figueiredo, S., França de Mendonça Filho, F., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Lattice Model For Numerical Analysis Of Fracture Process Of Concrete Material Under Various Loading Conditions

    Chang, Z., Zhang, H., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Micro-Cantilever Testing Of Cementitious Materials Under Various Loading Conditions

    Gan, Y., Zhang, H., Šavija, B., Schlangen, E. & van Breugel, K., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Numerical investigation of crack self-sealing in cement-based composites with superabsorbent polymers

    Rodríguez, C. R., Figueiredo, S. C., Deprez, M., Snoeck, D., Schlangen, E. & Šavija, B., 2019, In : Cement and Concrete Composites. 104, 12 p., 103395.

    Research output: Contribution to journalArticleScientificpeer-review

  23. On The Role Of Soft Inclusions On The Fracture Behaviour Of Cement Paste

    Mercuri, L., Romero Rodriguez, C., Xu, Y., Chaves Figueiredo, S., Mors, R., Rossi, E., Anglani, G., Antonaci, P., Šavija, B. & Schlangen, E., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete

    Panda, B., Noor Mohamed, N. A., Chandra Paul, S., Bhagath Singh, GVP., Tan, M. J. & Šavija, B., 2019, In : Materials. 12, 13, 12 p., 2149.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Thermal response of mortar panels with different forms of macro-encapsulated phase change materials: A finite element study

    Kong, S. Y., Yang, X., Paul, S. C., Wong, L. S. & Šavija, B., 2019, In : Energies. 12, 13, 15 p., 2636.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Use Of X-Ray Computated Tomogrphy As Input For Fracture Modelling Of Cement Paste-Aggregate Interface

    Zhang, H., Schlangen, E. & Šavija, B., 2019, Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Pijaudier-Cabot, G., Grassl, P. & La Borderie, C. (eds.). 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. 2018
  28. A comprehensive review on mechanical and durability properties of cement-based materials containing waste recycled glass

    Chandra Paul, S., Šavija, B. & Babafemi, A. J., 10 Oct 2018, In : Journal of Cleaner Production. 198, p. 891-906 16 p.

    Research output: Contribution to journalReview articleScientificpeer-review

  29. Towards understanding stochastic fracture performance of cement paste at micro length scale based on numerical simulation

    Zhang, H., Šavija, B. & Schlangen, E., 20 Sep 2018, In : Construction and Building Materials. 183, p. 189-201 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Testing and modelling of micro cement paste cube under indentation splitting

    Zhang, H., Schlangen, E. & Šavija, B., 28 Feb 2018, Computational Modelling of Concrete Structures: Proceedings of the Conference on Computational Modelling of Concrete and Concrete Structures . Meschke, G., Pichler, B. & Rots, J. G. (eds.). CRC Press, p. 121-126

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Effect of natural carbonation on the pore structure and elastic modulus of the alkali-activated fly ash and slag pastes

    Nedeljkovic, M., Savija, B., Zuo, Y., Luković, M. & Ye, G., 10 Feb 2018, In : Construction and Building Materials. 161, p. 687-704 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Modelling deformation and fracture of Gilsocarbon graphite subject to service environments

    Savija, B., Smith, G. E., Heard, P. J., Sarakinou, E., Darnbrough, J. E., Hallam, K. R., Schlangen, E. & Flewitt, P. E. J., 1 Feb 2018, In : Journal of Nuclear Materials. 499, p. 18-28 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Combined experimental and numerical study on micro-cube indentation splitting test of cement paste

    Zhang, H., Šavija, B. & Schlangen, E., 1 Jan 2018, In : Engineering Fracture Mechanics.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Engineering Properties of Concrete with Waste Recycled Plastic: A Review

    Babafemi, A. J., Šavija, B., Chandra Paul, S. & Anggraini, V., 2018, In : Sustainability. 10, 11, 26 p.

    Research output: Contribution to journalReview articleScientificpeer-review

  35. Flexural response of cementitious mortar bars reinforced by 3D printed polymeric mesh

    Huigen, V., Xu, Y., Schlangen, E. & Šavija, B., 2018, 4th International Conference on Service Life Design for Infrastructures: (SLD4) 27-30 August 2018 – Delft, Netherlands. Ye, G., Yuan, Y., Rodriguez, C. R., Zhang, H. & Šavija, B. (eds.). Rilem, p. 750-757 (Rilem proceedings; no. PRO 125).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Micromechanical modelling of cement paste using X-ray computed tomography and statistical nanoindentation

    Zhang, H., Šavija, B. & Schlangen, E., 2018, Proceedings of the Symposium on Concrete Modelling: CONMOD2018 27-30 August 2018 – Delft, Netherlands. Schlangen, E., de Schutter, G., Šavija, B., Zhang, H. & Romero Rodriguez, C. (eds.). Rilem, Vol. PRO 127. p. 231-234 (Rilem proceedings; no. PRO 127).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Modelling of deformation and fracture for a model quasi-brittle material with controlled porosity: Synthetic versus real microstructure

    Šavija, B., Smith, G. E., Liu, D., Schlangen, E. & Flewitt, P. E. J., 2018, In : Engineering Fracture Mechanics. 205, 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Modelling strategies for the study of crack self-sealing in mortar with superabsorbent polymers

    Romero Rodriguez, C., Chaves Figueiredo, S., Snoeck, D., Šavija, B. & Schlangen, E., 2018, Proceedings of the Symposium on Concrete Modelling: CONMOD2018 27-30 August 2018 – Delft, Netherlands. Schlangen, E., de Schutter, G., Šavija, B., Zhang, H. & Romero Rodriguez, C. (eds.). Rilem, Vol. PRO 127. p. 333-341 (Rilem proceedings; no. PRO 127).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Piezoresistive properties of cementitious composites reinforced by PVA fibres

    Figueiredo, S. C., Çopuroğlu, O., Šavija, B. & Schlangen, E., 2018, International Conference on Strain-Hardening Cement-Based Composites : SHCC 2017: Strain-Hardening Cement-Based Composites. Mechtcherine, V., Slowik, V. & Kabele, P. (eds.). Springer, Vol. 15. p. 709-717 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Size effect on splitting strength of hardened cement paste: Experimental and numerical study

    Zhang, H., Šavija, B., Xu, Y. & Schlangen, E., 2018, In : Cement and Concrete Composites. 94, p. 264-276

    Research output: Contribution to journalArticleScientificpeer-review

  41. Smart Crack Control in Concrete through Use of Phase Change Materials (PCMs): A Review

    Šavija, B., 2018, In : Materials. 11, 5, 31 p., 654.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Static and Fatigue Tests on Cementitious Cantilever Beams Using Nanoindenter

    Gan, Y., Zhang, H., Šavija, B., Schlangen, E. & van Breugel, K., 2018, In : Micromachines. 9, 12, 15 p., 630.

    Research output: Contribution to journalArticleScientificpeer-review

  43. 2017
  44. Design and testing of tubular polymeric capsules for self-healing of concrete

    Araújo, M., van Tittelboom, K., Feiteira, J., Gruyaert, E., Chatrabhuti, S., Raquez, J. M., Savija, B., Alderete, N., Schlangen, E. & de Belie, N., 25 Oct 2017, 3rd International Conference on Innovative Materials, Structures and Technologies (IMST 2017). Vol. 251. 9 p. (IOP Conference Series: Materials Science and Engineering; vol. 251).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Influence of microencapsulated phase change material (PCM) addition on (micro) mechanical properties of cement paste

    Šavija, B., Zhang, H. & Schlangen, E., 27 Jul 2017, In : Materials. 10, 8, p. 1-18 863.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Development of ductile cementitious composites incorporating microencapsulated phase change materials

    Savija, B., Lukovic, M., Kotteman, G., Chaves Figueiredo, S., França de Mendonça Filho, F. & Schlangen, E., 2017, In : International Journal of Advances in Engineering Sciences and Applied Mathematics. 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Experimentally validated multi-scale modelling scheme of deformation and fracture of cement paste

    Zhang, H., Šavija, B., Figueiredo, S. C. & Schlangen, E., 2017, In : Cement and Concrete Research. 102, p. 175-186

    Research output: Contribution to journalArticleScientificpeer-review

  48. Failure Modes in Concrete Repair Systems due to Ongoing Corrosion

    Lukovic, M., Savija, B., Ye, G., Schlangen, E. & van Breugel, K., 2017, In : Advances in Materials Science and Engineering. 14 p., 9649187.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Mechanical properties of ductile cementitious composites incorporating microencapsulated phase change materials

    Schlangen, E., Savija, B., Figueiredo, S. C., França de Mendonça Filho, F. & Luković, M., 2017, International Conference on Strain-Hardening Cement-Based Composites : SHCC 2017: Strain-Hardening Cement-Based Composites. Kabele, P., Mechtcherine, V. & Slowik, V. (eds.). Vol. 15. p. 115-122 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Simulation-Aided Design of Tubular Polymeric Capsules for Self-Healing Concrete

    Savija, B., Feiteira, J., Araújo, M., Chatrabhuti, S., Raquez, JM., van Tittelboom, K., Gruyaert, E., de Belie, N. & Schlangen, E., 2017, In : Materials. 10, 1, p. 1-13 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. The evaluation of deformation and fracture of Gilsocarbon graphite subject to service environments: Experimental and modelling

    Savija, B., Smith, G. E., Heard, P. J., Sarakinou, E., Darnbrough, J. E., Hallam, K. R., Schlangen, E. & Flewitt, P. E. J., 2017, Advances in Fracture and Damage Mechanics XVI - 16th FDM. Trans Tech Publications, Vol. 754 KEM. p. 91-94 4 p. (Key Engineering Materials; vol. 754 KEM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Towards understanding the influence of porosity on mechanical and fracture behaviour of quasi-brittle materials: Experiments and modelling

    Liu, D., Savija, B., Smith, G. E., Flewitt, P. E. J., Lowe, T. & Schlangen, E., 2017, In : International Journal of Fracture. 205, p. 57-72 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. 2016
  54. A 3D Lattice Modelling Study of Drying Shrinkage Damage in Concrete Repair Systems

    Luković, M., Savija, B., Schlangen, E., Ye, G. & van Breugel, K., 14 Jul 2016, In : Materials. 9, 19 p., 575.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Carbonation of cement paste: Understanding, challenges, and opportunities

    Savija, B. & Luković, M., 14 May 2016, In : Construction and Building Materials. 117, August, p. 285-301 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 Next

ID: 95471