1. 1999
  2. Developing a Transparent Tubular Laminated Column

    Veer, FA. & Pastunink, JR., 1999, Glass Processing Days. Conference Proceedings. J Vitkala (ed.). Tampere, Finland: Tamglass Ltd. Oy, p. 277-280 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  3. The Teaching of Materials Science at the Architecture Department of Delft University of Technology

    Veer, FA., 1999, Architecture and Engineering - The Teaching of Architecture for Multidisciplinary Practice. M Voyatzaki (ed.). Plymouth, UK: University of Plymouth, p. 385-393 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  4. 2000
  5. Comparison of the strength of conventional and PC-visor fencing masks (niet eerder opgenomen)

    Veer, FA., 2000, Unknown Publisher. 11 p.

    Research output: Book/ReportReportProfessional

  6. Het Vermoeiingsgedrag van photobond 4455 lijm (niet eerder opgegeven)

    Peters, B., Verhoef, LGW., Veer, FA. & Zuidema, J., 2000, Unknown Publisher. 67 p.

    Research output: Book/ReportReportProfessional

  7. Onderzoek naar Crak Closure bij vermoeiing van aluminium 5083 (niet eerder opgenomen)

    Veer, FA., Zuidema, J., Kranenburg, JA., Scheepmaker, JB. & Franchimon, Y., 2000, Delft: Delft University of Technology. 60 p.

    Research output: Book/ReportReportProfessional

  8. ZAPPI verbeteringen van transparante liggerconstructies (niet eerder opgenomen)

    Ting, CN. & Veer, FA., 2000, Unknown Publisher. 124 p.

    Research output: Book/ReportReportProfessional

  9. 2001
  10. A calculation of fatigue crak growth in al alloys after blocks of underloading.

    Zuidema, J., Kranenburg, JA., Veer, FA. & Riemslag, AC., 2001, Actual problems of materials mechanics: physicochemical aspects and diagnostics of materials properties. V Panasyuk (ed.). Lviv: National Academy of Sciences of Ukraine, p. 92-93 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. A new structural material by architectural demand

    Hobbelman, GJ., Veer, FA. & van Zijl, GPAG., 2001, Structural Engineering Mechanics and Computation. A Zingoni (ed.). Amsterdam: Elsevier, p. 455-462 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  12. Anomalous fatigue crack growth behaviour in AA 2024 and AA 5083

    Zuidema, J., Kranenburg, JA., Riemslag, AC., Veer, FA. & Boljanovic, S., 2001, 3th Internationale Conference on Materials Structures & Micromechanics of Fracture proceedings MSMF-3 (CD-rom). P Sandera (ed.). Brno: Fac.of Mechanical Engineering University of Technology Brno, p. 579-594 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. Crack closure and fatigue threshold of AA5083 alloy in air and sea water by two determination methods (niet eerder opgenomen)

    Veer, FA., 2001, In : Materials Science. 37, 6, p. 970-974 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Crack closure and fatigue threshold of AA5083 alloy in air and seawater by two determination methods (niet eerder opgenomen)

    van Kranenburg, C., Riemslag, AC., Zuidema, J., Benedictus-de Vries, SM. & Veer, FA., 2001, In : Physicochemical mechanics of materials. 37, 6, p. 96-98 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Crak closure dependence of long crak fatigue thresholds of AA 5083 in air and seawater using two delta K threshold measurement methods

    Kranenburg, JA., Riemslag, AC., Benedictus-de Vries, SM. & Veer, FA., 2001, Actual problems of materials mechanics: physicochemical aspects and diagnostics of materials properties. V Panasyuk (ed.). Lviv: National Academy of Sciences of Ukraine, p. 36-37 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  16. Developing a transparent tubular laminated column

    Veer, FA. & Pastunink, JR., 2001, In : Glass-Technology International. XI, 6, p. 134-137 4 p.

    Research output: Contribution to journalArticleProfessional

  17. Developing a tubular laminated colimn

    Veer, FA. & Pastunink, JR., 2001, In : Glass Machinery Plants & Accessories. 14, 2, p. 153-155 3 p.

    Research output: Contribution to journalArticleProfessional

  18. Fatigue crack growth of photocatalytic acrylic adhesive joints

    Veer, FA., Zuidema, J., Verhoef, LGW. & Peters, B., 2001, SAE VI (Structural Adhesives in Engineering). London: IOM communications, p. 161-164 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. Fatigue crack growth predictions in AA 5083 and AA 2024 using a simple geometric model (ook op CD-rom) www.elsevier.com/locate/icf10

    Riemslag, AC., Kranenburg, JA., Benedictus-de Vries, SM., Veer, FA. & Zuidema, J., 2001, ICF. Oxford: Elsevier, p. #1-#6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  20. Fracture control of glass through lamination (ook op CD-rom) www.elsevier.com/locate/icf10

    Veer, FA., Benedictus-de Vries, SM. & Kranenburg, JA., 2001, ICF. Oxford: Elsevier, p. #1-#6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  21. Invloed van de productiemethode op het vermoeiingsgedrag van fotokatalytische acrylaatlijmverbindingen

    Veer, FA., Zuidema, J., Cremers, EWW. & Werkman, HA., 2001, Unknown Publisher. 71 p.

    Research output: Book/ReportReportProfessional

  22. Mode II fatige crak growth of transparent adhesive joints

    Veer, FA., Zuidema, J. & Riemslag, AC., 2001, Actual problems of materials mechanics: physicochemical aspects and diagnostics of materials properties. V Panasyuk (ed.). Lviv: National Academy of Sciences of Ukraine, p. 82-83 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  23. Onderzoek naar de verschillende invloeden op de scheurgroeisnelheid bij vermoeiing van aluminium AA 2036 T4

    Veer, FA., Zuidema, J., Kranenburg, JA., Heijnis, JM. & Verweij, S., 2001, Delft: Delft University of Technology.

    Research output: Book/ReportReportProfessional

  24. Onderzoek naar invloed van de dikte en het chemisch harden op de sterkte van glas

    Veer, FA., Zuidema, J., van den Berg, FE. & van der Sluijs, JC., 2001, Unknown Publisher. 86 p.

    Research output: Book/ReportReportProfessional

  25. Onderzoek naar verschillende invloeden op de scheurgroeisnelheid bij vermoeing van aluminium AA 2024

    Zuidema, J., Veer, FA., Tenpierik, . & Kranenburg, JA., 2001, Delft: Delft University of Technology. 56 p.

    Research output: Book/ReportReportProfessional

  26. Plane stress and plane strain in side-grooved cct-specimens (ook op CD-rom) www.elsevier.com/locate/icf10

    Kranenburg, JA., Riemslag, AC., Benedictus-de Vries, SM., Zuidema, J. & Veer, FA., 2001, ICF. Oxford: Elsevier, p. #1-#6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  27. Reducing the amount of glass in modern glass constructions (CD-rom)

    Veer, FA. & Ting, CN., 2001, Glass in the New Millennium / Challenges and Break-through Technologies proceedings. H Waal, D. (ed.). National Committee Netherlands Glass Industry (NCNG), p. #1-#7

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  28. Structurally efficient glass laminated composite beams

    Veer, FA., Riemslag, AC. & Ting, CN., 2001, Glass Processing Days. J Vitkala (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 363-367 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. The design of innovative nylon joints to connect glass beams (zie ook BTO)

    Veer, FA., Hobbelman, GJ. & van der Ploeg, JA., 2001, Structural Engineering Mechanics and Computation. A Zingoni (ed.). Amsterdam: Elsevier, p. 447-454 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  30. The design of innovative nylon joints to connect glass beams (zie ook DC&KW)

    Veer, FA., Hobbelman, GJ. & van der Ploeg, JA., 2001, Structural Engineering, Mechanics and Computation / SEMC 2001. A Zingoni (ed.). Oxford: Elsevier, p. 447-454 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  31. The effect of specimen thickness during fatigue of S 355 construction steel (ook op CD-rom) www.elsevier.com/locate/icf10

    Veer, FA., Zuidema, J. & Houdijk, P. A., 2001, ICF. Oxford: Elsevier, p. #1-#6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  32. Transparent laminated composites for novel architectural structures ( CD-rom)

    Veer, FA. & de Vries, SM., 2001, Composites from fundametals to exploitation. A Bunsell & J Morton (eds.). London: IOM communications, p. #1-#9

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  33. Using Ansys to conduct virtual prototyping in the graduate work of architectural engineering students

    Veer, FA., van Swieten, PMJ., Hobbelman, GJ. & van der Woord, J., 2001, Advances in design science and technology. R Beheshti (ed.). Parijs: Europia Productions, p. 243-249 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  34. Using transparent intumescent coating to increase the fire resistance of glass and glass laminates (zie ook BIM)

    Veer, FA., van der Voorden, M., Rijgersberg, HA. & Zuidema, J., 2001, Glass Processing Days. J Vitkala (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 392-396 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  35. Using transparent intumescent coating to increase the fire resistance of glass and glass laminates (zie ook BTO)

    Veer, FA., van der Voorden, M., Rijgersberg, HA. & Zuidema, J., 2001, Glass Proceeding Days. J Vitkala (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 392-396 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  36. Verder onderzoek naar het ZAPPI systeem

    Veer, FA., 2001, Unknown Publisher. 42 p.

    Research output: Book/ReportReportProfessional

  37. Vermoeiing van photobond 4455 lijm

    Veer, FA., 2001, Unknown Publisher. 24 p.

    Research output: Book/ReportReportProfessional

  38. 2002
  39. 'Porto' het ontwikkelen van een concept voor een translucent kunsthars 'beton' voor een overspannende constructie

    van den Berg, A. & Veer, FA., 2002, Delft: Technische Universiteit Delft. 107 p.

    Research output: Book/ReportReportProfessional

  40. A crack closure correction model for restoring similitude between the increasing load amplitude test and the conventional constant amplitude test

    Zuidema, J., van Kranenburg, C., Uematsu, Y. & Veer, FA., 2002, ECF 14 Fracture Mechanics Beyond 2000, Volume I/III. A Neimitz (ed.). p. #1-#8

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  41. Crack closure in AA 5083

    Kranenburg, JA., Zuidema, J., Nykyforchyn, H. M. & Veer, FA., 2002, Fatigue 2002 Vol 4/5. Proceedings of the eighth international Fatigue congress. A Blom (ed.). Cradley Heath: EMAS, p. 2353-2360 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  42. De sterkte van 6mm float glas

    Veer, FA., 2002, Unknown Publisher. 12 p.

    Research output: Book/ReportReportProfessional

  43. Een zo transparant mogelijk ruimtevakwerk

    Lambrechts, AC. & Veer, FA., 2002, Unknown Publisher. 60 p.

    Research output: Book/ReportReportProfessional

  44. Energy absorption in glass-polycarbonate laminates

    Veer, FA., Riemslag, AC. & van Kranenburg, C., 2002, ECF 14 Fracture Mechanics Beyond 2000, Volume I/III. A Neimitz (ed.). p. #1-#8

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  45. Environmental stress cracking in arnitel U 2000/35

    Veer, FA., 2002, Delft: Technische Universiteit Delft. 49 p.

    Research output: Book/ReportReportProfessional

  46. Mode II fatigue failure in transparent adhevise joints

    Veer, FA., Zuidema, J., Riemslag, AC. & van Kranenburg, C., 2002, In : Materials Science. 38, 6, p. 773-779 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Mode II fatigue failure in transparent adhevise joints.

    Veer, FA., Zuidema, J., Riemslag, AC. & van Kranenburg, C., 2002, In : Physicochemical mechanics of materials. 38, 6, p. 13-17 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Onderzoek brandwerend glas

    Tuizenga, L., Veer, FA. & Bokel, R., 2002, Delft: Technische Universiteit Delft. 13 p.

    Research output: Book/ReportReportProfessional

  49. Onderzoek naar de invloed van corrosie op de scheurgroeisnelheid bij vermoeiing van aluminium AA 5083

    Zuidema, J., Veer, FA., Kranenburg, JA., Rietdijk, N. & Boon, M., 2002, Delft: Delft University of Technology. 42 p.

    Research output: Book/ReportReportProfessional

  50. Onderzoek naar de mechanische eigenschappen van karton / 1- De treksterkte van massief karton

    Veer, FA., Rijgersberg, HA., Wit, M. & Kuipers, N., 2002, Delft: Technische Universiteit Delft. 10 p.

    Research output: Book/ReportReportProfessional

  51. Onderzoek vermoeiing AA2024 en AA 5083

    Veer, FA., Zuidema, J., van Kranenburg, C., van der Linden, R. & Zwaal, DI., 2002, Delft: Technische Universiteit Delft.

    Research output: Book/ReportReportProfessional

  52. Technische realiseerbaarheid van een aquarium ontwerp

    Veer, FA. & Hobbelman, GJ., 2002, Delft: Faculteit Bouwkunde, TU Delft. 11 p.

    Research output: Book/ReportReportProfessional

  53. The creation of micro cracks during curing of adhesive resins and the effect of different types of microcracks on the fatigue life time

    Veer, FA., Zuidema, J. & Riemslag, AC., 2002, Fatigue 2002 Vol 5/5. Proceedings of the eighth international fatigue congress. A Blom (ed.). Cradley Heath: EMAS, p. 3293-3300 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  54. The design of a full glass dome using a new glass/polymer composite material

    Hobbelman, GJ., Timm, B., Veer, FA. & van Swieten, PMJ., 2002, Proc.Int. IASS Symposium on lightweight structures in civil engineering. JB Obrebski (ed.). Warsaw: Micro-publisher Jan B. Obrebski, p. 828-831 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  55. The effect of specimen thickness during constant (spanningsintensiteitsfactor) fatigue testing of S 355 construction steel

    Veer, FA., Zuidema, J. & Houdijk, P. A., 2002, Fatigue 2002 Vol 1/5 Proceedings of the eighth international Fatigue congress. A Blom (ed.). Cradley Heath: EMAS, p. 565-571 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  56. The strength of glass

    Veer, FA., van den Berg, A., van der Sluijs, MMA., Zuidema, J. & van Kranenburg, C., 2002, ECF 14 Fracture Mechanics Beyond 2000, Volume I/III. A Neimitz (ed.). p. #1-#8

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  57. Verbetering van technisch aquarium ontwerp

    Veer, FA., 2002, Delft: Faculteit Bouwkunde, TU Delft. 11 p.

    Research output: Book/ReportReportProfessional

  58. Verdere ontwikkeling van een concept voor een gelamineerde glazen kolom

    Swart, P. & Veer, FA., 2002, Delft: Faculteit Bouwkunde, TU Delft. 57 p.

    Research output: Book/ReportReportProfessional

  59. 2003
  60. Composite glass beams, the third chapter

    Veer, FA., Rijgersberg, HA., Ruytenbeek, D., Louter, C. & Zuidema, J., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 307-310 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  61. Compression failure behaviour of corrugated cardboard

    Hobbelman, GJ., Verhoef, M., Veer, FA. & Kuipers, NB., 2003, Proc. 9th Int. Conf. on the Mechanical Behaviour of Materials (ICM9), (cd-rom), Geneva, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). ICM9, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  62. De materiaalkunde van ijs

    Veer, FA., 2003, In : RuMoer: Periodical for the Building Technologist. 9, 28, p. 43-46 4 p.

    Research output: Contribution to journalArticleProfessional

  63. Effect of edge quality on the strength obtained by lon-exchanging

    Zuidema, J. & Veer, FA., 2003, Glass processing days / Educational Glass Conference.. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 82-85 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  64. Effect of specimen geometry on fatigue crack growth in Al alloy AA 5083 (ook op CD ROM).

    Zuidema, J., van Kranenburg, C., Nykyforchyn, H. M., Lonyuk, B. & Veer, FA., 2003, Proc. 9th Int. Conf. on the Mechanical Behaviour of Materials (ICM9) (CD ROM) , Geneva, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). ICM9, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  65. Fast delta threshold measurement: Investigation of boundary conditions (ook op CD ROM).

    van Kranenburg, C., Zuidema, J., Lonyuk, B. & Veer, FA., 2003, Proc. 9th Int. Conf. on the Mechanical behaviour of materials (ICM9), (CD ROM), Geneva, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). ICM9, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  66. Fire resistance of glass

    Bokel, RMJ., Veer, FA. & Tuisinga, L., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 362-363 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  67. Forced crack path deviation.

    van Kranenburg, C., Zuidema, J. & Veer, FA., 2003, Proc. of the Int. Conf. on Fatigue Crack Paths (FCP 2003), (CD ROM), September 18-20, 2003.. Carpinteri, A. (ed.). Parma, Italy: University of Parma, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  68. Glass architecture, beyond mere transparency

    van Swieten, PMJ., Lagendijk, K. & Veer, FA., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 159-161 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  69. Materializing a vision

    Veer, FA. & Hobbelman, GJ., 2003, In : Pantheon. 7, 5, p. 31-33 3 p.

    Research output: Contribution to journalArticleProfessional

  70. Mode II fatigue failure in transparent adhesive joints.

    Veer, FA., 2003, In : Materials Science. 38, 6, p. 773-779 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. Onderzoek naar de mechanische eigenschappen van karton / 2- De spreiding van de treksterkte van massief karton

    Veer, FA., Rijgersberg, HA. & Kuipers, NB., 2003, Delft: Delft University of Technology. 11 p.

    Research output: Book/ReportReportProfessional

  72. Spanning stuctures in glass

    Veer, FA., Gross, S., Hobbelman, GJ., Vredeling, M., Janssen, MJHC., van den Berg, R. & Rijgersberg, HA., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 78-81 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  73. Square and slant crack growth in (thin) sheets.

    Zuidema, J., Veer, FA. & van Kranenburg, C., 2003, Proc. of the Int. Conf. on Fatigue Crack Paths (FCP 2003), (CD ROM), September 18-20, 2003.. Carpinteri, A. (ed.). Parma, Italy: University of Parma, p. 1-15 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  74. The design, construction and validation of a structural glass dome

    Veer, FA., Wurm, J. & Hobbelman, GJ., 2003, Proceedings glassprocessing days 2003. Vitkala, J. (ed.). Tampere, Finland: Tamglass, p. 156-158 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  75. The relation between hydrolysis and chemical environmental stress cracking of (block co)polyesters, (ook op CD ROM).

    Kuipers, NB., Janssen, M., Riemslag, AC., Dijkstra, K., Lange, RFM., Marissen, R., Veer, FA. & Bakker, A., 2003, Proc. 9th Int. Conf. on the Mechanical Behaviour of Materials (ICM9) (CD ROM), Genova, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). Geneve, Zwitserland: ICM9, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  76. The strenght of glass, effect of edge quality

    Veer, FA. & Zuidema, J., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 106-109 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  77. The use of glass in concrete as reinforcement and aggregate (ook op CD ROM).

    Hobbelman, GJ., van der Sluis, MMA., Veer, FA. & Zuidema, J., 2003, 9th Int. Conf. on the Mechanical Behaviour of Materials (ICM9), (CD ROM), Geneva, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). ICM9, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  78. Usage of cold bent glass panes as an approximation for doublecurved surfaces

    Vollers, KJ. & Veer, FA., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 173-175 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  79. Voorjaarsrapport aan Siko b.v.

    Veer, FA., 2003, Delft: Delft University of Technology. 30 p.

    Research output: Book/ReportReportProfessional

  80. Voorjaarsrapport aan Van Nordenne groep

    Veer, FA., 2003, Delft: Delft University of Technology. 50 p.

    Research output: Book/ReportReportProfessional

  81. 2004
  82. Determination and modelling of the mechanical behaviour of cardboard as a building material

    Schonwalder, J., Rots, JG. & Veer, FA., 2004, 5th International PhD symposium in civil engineering volume I. Walraven, J., Blaauwendraad, J., Scarpas, T. & Snijder, B. (eds.). Delft: CRC Press / Balkema, p. 413-421 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  83. Discontinous crack growth during environmental stress cracking of a PBA/PBT co-poly(ester ester).

    Kuipers, NB., Janssen, M., Marissen, R., Lange, RFM., Riemslag, AC., Groote Schaarsberg, MJM., de Rooij, MR., Veer, FA., Dijkstra, K. & Bakker, A., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments (ECF15), Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  84. Experimental determination and numerical modelling of the failure behaviour of historical masonry.

    Veer, FA., Hobbelman, GJ., Dijken, M., Schuurman, ACB., Rots, JG. & Janssen, M., 2004, Proceedings 13th International Brick and Masonry Conference, Amsterdam.. Vermeltfoort, A. (ed.). Amsterdam: 13th Int. Brick and Masonry Conf., p. 1129-1136 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  85. Failure criteria for transparent acrylic adhesive joints under static, fatigue and creep loading.

    Veer, FA., Schonwalder, J., Zuidema, J. & van Kranenburg, C., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments (ECF15), Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  86. From transparant steel tot transparent concrete, the evolution of a philosophy

    Veer, FA., 2004, There / Not there. Rots, J. & Bos, FP. (eds.). Delft: Delft University of Technology, p. 99-106 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  87. Influence of measurement method on fatigue crack growth threshold.

    van Kranenburg, C., He, W., Zuidema, J. & Veer, FA., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments (ECF15), Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  88. Rapid determination of creep properties of paperboard using staircase loarding tests

    Schonwalder, J. & Veer, FA., 2004, The 2004 progress in paper physics seminar. Gregersen, OW. (ed.). Trondheim: s.n., p. 96-99 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  89. Stainless steel reinforced and post-tensioned glass beams (cd-rom)

    Bos, FP., Veer, FA., Hobbelman, GJ. & Louter, PC., 2004, International conference on experimental mechanics / icem12 / advances in experimental mechanics. Pappalettere, C. (ed.). Bari: Politecnico di Bari, p. #1-#9

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  90. The creep fatigue interaction in solid paper.

    Veer, FA., Schonwalder, J., Heidweiller, AJ. & Kuipers, NB., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments (ECF15), Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  91. 2005
  92. 10 years of zappi research

    Veer, FA., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 424-428 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  93. Design and testing of glass purlins for a 100 m2 transparent pavilion

    Belis, J., Impe, R., Louter, PC., Veer, FA. & Bos, FP., 2005, Proceedings of the 9th international conference on architectural and automotive glass : glass processing days. s.n. (ed.). Tampere: Tammer-Paino Oy, p. 392-395 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  94. Designing and planning the world's biggest experimental glass structure

    Bos, FP., Veer, FA., Hobbelman, GJ., Romein, T., Nijsse, R., Belis, J., Louter, PC. & van Nieuwenhuijzen, EJ., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 401-405 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  95. Reinforced glass cantilever beams

    Louter, PC., Belis, J., Veer, FA. & Hobbelman, GJ., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 429-433 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  96. Shear lips on fatigue fracture surfaces of aluminium alloys.

    Zuidema, J., Veer, FA. & van Kranenburg, C., 2005, In : Fatigue & Fracture of Engineering Materials and Structures. 28, p. 159-167 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Strength and fracture behaviour of annealed and tempered float glass (cd-rom)

    Veer, FA., Bos, FP., Zuidema, J. & Romein, T., 2005, 11th International conference on fracture Turin (Italy). Carpinteri, A. (ed.). Torino: Politecnico di Torino, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  98. The evaluation of the all transparent pavilion project

    Bos, FP., Veer, FA., Romein, T. & Nijsse, R., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 396-400 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  99. The future of the all transparant pavilion concept

    van Noordenne, G., Romein, T. & Veer, FA., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 389-391 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  100. The joint for the all transparent pavilion

    Bos, FP., Veer, FA., Belis, J., van Nieuwenhuijzen, EJ. & Louter, PC., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 385-388 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  101. The laminated glass column

    van Nieuwenhuijzen, EJ., Bos, FP. & Veer, FA., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 420-423 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  102. The possibilities of glass bond adhesives

    Janssen, MJHC., Veer, FA. & Nägele, T., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 436-439 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  103. The strength and failure of glass in bending.

    Zuidema, J., Veer, FA. & Bos, FP., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 443-445 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  104. 2006
  105. Construction with cardboard: design and modelling of a cardboard beam

    Schonwalder, J., Veer, FA. & Rots, JG., 2006, Deformation and Fracture Processes in Paper and Wood Materials. s.n. (ed.). Sundsvall: Mid Sweden University, p. 1-5 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  106. Experimental research on scale 1:8 models of an 18 m reinforced glass beam

    Louter, PC., van Herwijnen, F., Schetters, L., Romein, T. & Veer, FA., 2006, International symposium on the application of architectural glass ISAAG 2006 : conference proceedings. Siebert, G. (ed.). Munchen: Universitat der Bundeswehr, p. 215-222 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  107. Fatigue of photo catalytic adhesives in direct tension and shear

    van Kranenburg, C., Veer, FA., de Richemont, S. & Zuidema, J., 2006, Proc. 9th International Fatigue Congress, Atlanta, USA. SN (ed.). S.l.: Elsevier, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  108. Quality control and the strength of glass

    Veer, FA., Louter, PC. & Romein, T., 2006, Fracture of Nano and Engineering Materials and Structures. Gdoutos, E. E. (ed.). Dordrecht: Springer, p. 301-302 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Previous 1 2 3 Next

ID: 177311