1. Conference contribution › Scientific › Peer-reviewed
  2. Education on Structural Glass Design: Redefining glass through the design of innovative, full-glass structures

    Oikonomopoulou, F., Bristogianni, T., Louter, C., Veer, F. & Nijsse, R., 2019, Structure and architecture: Bridging the gap and crossing borders: Proceedings of the Fourth International Conference on Structures and Architecture (ICSA 2019). Cruz, P. (ed.). London: Taylor & Francis, Vol. 1. p. 593-600 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  3. Effect of edge quality on the strength obtained by lon-exchanging

    Zuidema, J. & Veer, FA., 2003, Glass processing days / Educational Glass Conference.. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 82-85 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  4. Effect of specimen geometry on fatigue crack growth in Al alloy AA 5083 (ook op CD ROM).

    Zuidema, J., van Kranenburg, C., Nykyforchyn, H. M., Lonyuk, B. & Veer, FA., 2003, Proc. 9th Int. Conf. on the Mechanical Behaviour of Materials (ICM9) (CD ROM) , Geneva, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). ICM9, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  5. Energy absorption in glass-polycarbonate laminates

    Veer, FA., Riemslag, AC. & van Kranenburg, C., 2002, ECF 14 Fracture Mechanics Beyond 2000, Volume I/III. A Neimitz (ed.). p. #1-#8

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  6. Experimental determination and numerical modelling of the failure behaviour of historical masonry.

    Veer, FA., Hobbelman, GJ., Dijken, M., Schuurman, ACB., Rots, JG. & Janssen, M., 2004, Proceedings 13th International Brick and Masonry Conference, Amsterdam.. Vermeltfoort, A. (ed.). Amsterdam: 13th Int. Brick and Masonry Conf., p. 1129-1136 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  7. Experimental research on scale 1:4 models of an 18m reinforced glass beam, part i

    Louter, PC. & Veer, FA., 2007, Glass performance days 2007, conference proceedings. s.n. (ed.). Tampere: Glass performance days, p. 87-92 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  8. FEM-analysis of stress (re)distribution in cracked reinforced glass beams, and exploratory study

    Louter, PC., Hobbelman, GJ., Guse, EA. & Veer, FA., 2007, Proceedings of the third international conference on structural engineering , mechanics and computation. Zingoni, A. (ed.). Rotterdam: Millpress Science publishers, p. 1719-1724 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  9. Failure criteria for transparent acrylic adhesive joints under static, fatigue and creep loading.

    Veer, FA., Schonwalder, J., Zuidema, J. & van Kranenburg, C., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments (ECF15), Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  10. Fast delta threshold measurement: Investigation of boundary conditions (ook op CD ROM).

    van Kranenburg, C., Zuidema, J., Lonyuk, B. & Veer, FA., 2003, Proc. 9th Int. Conf. on the Mechanical behaviour of materials (ICM9), (CD ROM), Geneva, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). ICM9, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. Fatigue crack growth of photocatalytic acrylic adhesive joints

    Veer, FA., Zuidema, J., Verhoef, LGW. & Peters, B., 2001, SAE VI (Structural Adhesives in Engineering). London: IOM Communications, p. 161-164 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  12. Fatigue crack growth predictions in AA 5083 and AA 2024 using a simple geometric model (ook op CD-rom) www.elsevier.com/locate/icf10

    Riemslag, AC., Kranenburg, JA., Benedictus-de Vries, SM., Veer, FA. & Zuidema, J., 2001, ICF. Oxford: Elsevier, p. #1-#6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. Fatigue of photo catalytic adhesives in direct tension and shear

    van Kranenburg, C., Veer, FA., de Richemont, S. & Zuidema, J., 2006, Proc. 9th International Fatigue Congress, Atlanta, USA. SN (ed.). S.l.: Elsevier, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  14. Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing

    Chen, Y., Veer, F., Copuroglu, O. & Schlangen, E., 2018, First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018. Wangler, T. & Flatt, R. J. (eds.). Springer, p. 269-276 8 p. 30. (RILEM bookseries; vol. 19).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  15. Fire resistance of glass

    Bokel, RMJ., Veer, FA. & Tuisinga, L., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 362-363 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  16. Forced crack path deviation.

    van Kranenburg, C., Zuidema, J. & Veer, FA., 2003, Proc. of the Int. Conf. on Fatigue Crack Paths (FCP 2003), (CD ROM), September 18-20, 2003.. Carpinteri, A. (ed.). Parma, Italy: University of Parma, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  17. Fracture control of glass through lamination (ook op CD-rom) www.elsevier.com/locate/icf10

    Veer, FA., Benedictus-de Vries, SM. & Kranenburg, JA., 2001, ICF. Oxford: Elsevier, p. #1-#6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  18. Fracture resistance, surface defects and structural strength of glass

    Rodichev, YM. & Veer, FA., 2010, Challenging glass 2 : conference on architectural and structural applications of glass. Bos, FP., Louter, PC. & Veer, FA. (eds.). s.l.: s.n., p. 363-373 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. From transparant steel tot transparent concrete, the evolution of a philosophy

    Veer, FA., 2004, There / Not there. Rots, J. & Bos, FP. (eds.). Delft: Delft University of Technology, p. 99-106 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  20. Glass architecture, beyond mere transparency

    van Swieten, PMJ., Lagendijk, K. & Veer, FA., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 159-161 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  21. Hidden damage from the cutting process in cut, ground and polished glass

    Veer, FA. & Rodichev, YM., 2011, Glass performance days 2011 : 12th International conference on architectural and automotive glass. s.n. (ed.). Glaston, Finland: Glass performance days, p. 453-455 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  22. Influence of measurement method on fatigue crack growth threshold.

    van Kranenburg, C., He, W., Zuidema, J. & Veer, FA., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments (ECF15), Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  23. Innovative Glass Recipes Containing Industrial Waste Materials

    de Lima, C. J., Veer, F., Çopuroglu, O. & Nijsse, R., 2018, Proceedings of the Challenging Glass Conference 6 (CGC 6): International Conference on the Architectural and Structural Application of Glass. Louter, C., Bos, F., Belis, J., Veer, F. & Nijsse, R. (eds.). TU Delft Open, p. 533-542 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Investigation on multilayer paper boards as a structural material

    van Kranenburg, C., Schonwalder, J., Veer, FA., Zuidema, J. & Wnuk, M., 2007, Proceedings of the third international conference on structural engineering , mechanics and computation. Zingoni, A. (ed.). Rotterdam: Millpress Science publishers, p. 1572-1576 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  25. Large span reinforced glass beams, prototype research

    Louter, PC. & Veer, FA., 2007, IAAS 2007 Shell and Spatial Structures. s.n. (ed.). s.l., p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  26. Large span reinforced glass beams, prototype research

    Louter, PC. & Veer, FA., 2007, IAAS 2007 Shell and Spatial Structures. s.n. (ed.). s.l., p. 231-232 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  27. Looking at glass from a different angle: New insights into fracture patterns through transmitted light microscopy

    van der Velde, O., Copuroglu, O. & Veer, FA., 2015, Proceedings of the 15th Euroseminar on microscopy applied to building materials. Copuroglu, O. (ed.). Delft: Delft University of Technology, p. 113-120 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  28. Loss of strength due to damage close to load bearing holes in annealed and fully tempered glass

    Veer, FA., Nijsse, R. & Riemslag, AC., 2014, Challenging Glass 4: Structural Glass-Novel design methods and next generation products. Louter, C., Bos, F., Belis, J. & Lebet, JP. (eds.). Abingdon: Taylor & Francis, p. 739-746 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. Mode II fatige crak growth of transparent adhesive joints

    Veer, FA., Zuidema, J. & Riemslag, AC., 2001, Actual problems of materials mechanics: physicochemical aspects and diagnostics of materials properties. V Panasyuk (ed.). Lviv: National Academy of Sciences of Ukraine, p. 82-83 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  30. Perceptual effects of overlapping curved glass

    Veer, FA., Cruz, PJS. & Carvalho, PLL., 2010, Glass / facade / energy. Schneider, J. & Weller, B. (eds.). s.l.: Technische Universität Darmstadt, Technische Universität Dresden, p. 527-534 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  31. Perforated steel place to laminated glass adhesive properties

    Cavalho, P., Cruz, PJS. & Veer, FA., 2011, Glass performance days 2011 : 12th International conference on architectural and automotive glass. s.n. (ed.). Glaston, Finland: Glass performance days, p. 281-285 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  32. Plane stress and plane strain in side-grooved cct-specimens (ook op CD-rom) www.elsevier.com/locate/icf10

    Kranenburg, JA., Riemslag, AC., Benedictus-de Vries, SM., Zuidema, J. & Veer, FA., 2001, ICF. Oxford: Elsevier, p. #1-#6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  33. Prediction of Strength for Inhomogeneous: Defective Glass Elements Based on the Sequential Partitioning of the Data and Weibull Statistical Distribution

    Shabetia, A., Rodichev, Y., Veer, F. & Soroka, E., May 2018, Proceedings of the Challenging Glass Conference 6 (CGC 6): International Conference on the Architectural and Structural Application of Glass. Louter, C., Bos, F., Belis, J., Veer, F. & Nijsse, R. (eds.). Delft University of Technology, p. 749-758 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  34. Production and Testing of Kiln-cast Glass Components for an Interlocking, Dry-assembled Transparent Bridge

    Bristogianni, T., Oikonomopoulou, F., Veer, F., Snijder, A. & Nijsse, R., Jun 2017, Glass Performance Days 2017 Conference Proceedings. Tampere, Finland: Glass PerformanceDays, Glaston Finland Oy, p. 101-106 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  35. Quality control and the strength of glass

    Veer, FA., Louter, PC. & Romein, T., 2006, Fracture of Nano and Engineering Materials and Structures. Gdoutos, E. E. (ed.). Dordrecht: Springer, p. 301-302 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  36. Rapid determination of creep properties of paperboard using staircase loarding tests

    Schonwalder, J. & Veer, FA., 2004, The 2004 progress in paper physics seminar. Gregersen, OW. (ed.). Trondheim: s.n., p. 96-99 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  37. Reducing the amount of glass in modern glass constructions (CD-rom)

    Veer, FA. & Ting, CN., 2001, Glass in the New Millennium / Challenges and Break-through Technologies proceedings. H Waal, D. (ed.). National Committee Netherlands Glass Industry (NCNG), p. #1-#7

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  38. Reinforced glass beams composed of annealed, heat-strengthened and fully tempered glass

    Louter, C., Belis, J., Bos, F. & Veer, FA., 2012, Proceedings of the 3rd Challenging Glass conference : conference on architectural and structural applications of glass. Bos, F., Louter, C., Nijsse, R. & Veer, F. (eds.). Lansdale: IOS Press, p. 691-702 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  39. Reinforced glass cantilever beams

    Louter, PC., Belis, J., Veer, FA. & Hobbelman, GJ., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 429-433 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  40. Reinforced glass concept : an experimental research

    Louter, PC., Hobbelman, GJ. & Veer, FA., 2007, Proceedings of the 6th International conference on fracture mechanics of concrete and concrete structures. Carpinteri, A., Gambarova, P. G., Ferro, G. & Plizzari, G. A. (eds.). Leiden: Taylor & Francis, p. 1699-1706 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  41. Reinforced segmented float glass, a novel way to create safe transparent beams

    Veer, FA., Louter, PC., Bos, FP. & Schetters, LPT., 2007, Actes du colloque, Le verre materiau fonctionnel de futur. Simmerman, D. (ed.). Nancy: Pole Verrier, p. 1-19 19 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  42. Reinforcing glass, effects of reinforcement geometry and bonding technology

    Louter, PC. & Veer, FA., 2007, Glass performance days 2007, conference proceedings. s.n. (ed.). Tampere: Glass performance days, p. 93-97 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  43. Restoring and structurally reinforcing historic monuments by glass

    Oikonomopoulou, F., Bristogianni, T., Karron, K., Groot, C., Veer, F. & Nijsse, R., Aug 2016, Proceedings of the 6th International Conference on Structural Engineering, Mechanics and Computation: Cape Town, South Africa. Zingoni, A. (ed.). 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  44. Scaling up SentryGlas-laminated reinforced glass beams

    Louter, C., Belis, J. & Veer, F. A., 2010, Structures and Architecture. Cruz, PJS. (ed.). CRC Press / Balkema, p. 311-318 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  45. Spanning stuctures in glass

    Veer, FA., Gross, S., Hobbelman, GJ., Vredeling, M., Janssen, MJHC., van den Berg, R. & Rijgersberg, HA., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 78-81 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  46. Square and slant crack growth in (thin) sheets.

    Zuidema, J., Veer, FA. & van Kranenburg, C., 2003, Proc. of the Int. Conf. on Fatigue Crack Paths (FCP 2003), (CD ROM), September 18-20, 2003.. Carpinteri, A. (ed.). Parma, Italy: University of Parma, p. 1-15 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  47. Stacking glass elements, building a glass tower

    Veer, FA., Lia, W., Belis, J., Hobbelman, GJ., Bos, FP., Louter, PC., Kamerling, MW. & Romein, T., 2007, Glass performance days 2007, conference proceedings. s.n. (ed.). Tampere: Glass performance days, p. 170-173 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  48. Stacking glass elements, how to build a glass tower

    Veer, FA., Lia, W., van Swieten, PMJ., Hobbelman, GJ., Bos, FP., Louter, PC., Romein, T. & Belis, J., 2007, Glass performance days 2007, conference proceedings. s.n. (ed.). Tampere: Glass performance days, p. 166-169 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  49. Stainless steel reinforced and post-tensioned glass beams (cd-rom)

    Bos, FP., Veer, FA., Hobbelman, GJ. & Louter, PC., 2004, International conference on experimental mechanics / icem12 / advances in experimental mechanics. Pappalettere, C. (ed.). Bari: Politecnico di Bari, p. #1-#9

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  50. State of surface and structural strength of glass

    Rodichev, YM. & Veer, FA., 2010, Glass / facade / energy. Schneider, J. & Weller, B. (eds.). s.l.: Technische Universität Darmstadt, Technische Universität Dresden, p. 93-99 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  51. Strength and fracture behaviour of annealed and tempered float glass (cd-rom)

    Veer, FA., Bos, FP., Zuidema, J. & Romein, T., 2005, 11th International conference on fracture Turin (Italy). Carpinteri, A. (ed.). Torino: Politecnico di Torino, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  52. Structural Strength of Laminated Glass

    Rodichev, Y., Veer, F., Strizhalo, V., Soroka, E. & Shabetia, A., May 2018, Proceedings of the Challenging Glass Conference 6 (CGC 6): International Conference on the Architectural and Structural Application of Glass. Louter, C., Bos, F., Belis, J., Veer, F. & Nijsse, R. (eds.). Delft University of Technology, p. 453-462 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  53. Structurally efficient glass laminated composite beams

    Veer, FA., Riemslag, AC. & Ting, CN., 2001, Glass Processing Days. J Vitkala (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 363-367 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  54. Surface cracked layer and damage resistance of glass under contact loading

    Rodichev, Y., Yevplov, Y., Soroka, H. & Veer, FA., 2012, Proceedings of the 3rd Challenging Glass conference : conference on architectural and structural applications of glass. Bos, F., Louter, C., Nijsse, R. & Veer, F. (eds.). Lansdale: IOS Press, p. 523-533 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  55. Surface defects and statistical characteristics of glass strength

    Rodichev, Y., Yevplov, Y., Soroka, H., Veer, FA., Tregubov, N. & Polivyany, V., 2012, Proceedings of the 3rd Challenging Glass conference : conference on architectural and structural applications of glass. Bos, F., Louter, C., Nijsse, R. & Veer, F. (eds.). Lansdale: IOS Press, p. 535-552 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  56. The Teaching of Materials Science at the Architecture Department of Delft University of Technology

    Veer, FA., 1999, Architecture and Engineering - The Teaching of Architecture for Multidisciplinary Practice. M Voyatzaki (ed.). Plymouth, UK: University of Plymouth, p. 385-393 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  57. The creation of micro cracks during curing of adhesive resins and the effect of different types of microcracks on the fatigue life time

    Veer, FA., Zuidema, J. & Riemslag, AC., 2002, Fatigue 2002 Vol 5/5. Proceedings of the eighth international fatigue congress. A Blom (ed.). Cradley Heath: EMAS, p. 3293-3300 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  58. The creep fatigue interaction in solid paper.

    Veer, FA., Schonwalder, J., Heidweiller, AJ. & Kuipers, NB., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments (ECF15), Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  59. The design of a full glass dome using a new glass/polymer composite material

    Hobbelman, GJ., Timm, B., Veer, FA. & van Swieten, PMJ., 2002, Proc.Int. IASS Symposium on lightweight structures in civil engineering. JB Obrebski (ed.). Warsaw: Micro-publisher Jan B. Obrebski, p. 828-831 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  60. The design of innovative nylon joints to connect glass beams (zie ook BTO)

    Veer, FA., Hobbelman, GJ. & van der Ploeg, JA., 2001, Structural Engineering Mechanics and Computation. A Zingoni (ed.). Amsterdam: Elsevier, p. 447-454 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  61. The design of innovative nylon joints to connect glass beams (zie ook DC&KW)

    Veer, FA., Hobbelman, GJ. & van der Ploeg, JA., 2001, Structural Engineering, Mechanics and Computation / SEMC 2001. A Zingoni (ed.). Oxford: Elsevier, p. 447-454 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  62. The design, construction and validation of a structural glass dome

    Veer, FA., Wurm, J. & Hobbelman, GJ., 2003, Proceedings glassprocessing days 2003. Vitkala, J. (ed.). Tampere, Finland: Tamglass, p. 156-158 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  63. The design, testing and construction of a folded reinforced glass structure

    Veer, FA., Carvalho, P. & Cruz, PJS., 2014, Challenging Glass 4: Structural Glass-Novel design methods and next generation products. Louter, C., Bos, F., Belis, J. & Lebet, JP. (eds.). Abingdon: Taylor & Francis, p. 227-234 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  64. The effect of manufacturing flaws in the meso-structure of cast glass on the structural performance

    Bristogianni, T., Oikonomopoulou, F., Veer, F. & Nijsse, R., 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), September 2-4, 2019, Cape Town, South Africa. Zingoni, A. (ed.). London: CRC Press, p. 1703-1708 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  65. The effect of specimen thickness during constant (spanningsintensiteitsfactor) fatigue testing of S 355 construction steel

    Veer, FA., Zuidema, J. & Houdijk, P. A., 2002, Fatigue 2002 Vol 1/5 Proceedings of the eighth international Fatigue congress. A Blom (ed.). Cradley Heath: EMAS, p. 565-571 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  66. The effect of specimen thickness during fatigue of S 355 construction steel (ook op CD-rom) www.elsevier.com/locate/icf10

    Veer, FA., Zuidema, J. & Houdijk, P. A., 2001, ICF. Oxford: Elsevier, p. #1-#6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  67. The evaluation of the all transparent pavilion project

    Bos, FP., Veer, FA., Romein, T. & Nijsse, R., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 396-400 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  68. The failure strength pf glass, a non transparent value

    Veer, FA., Riemslag, AC. & Romein, T., 2007, Glass performance days 2007, conference proceedings. s.n. (ed.). Tampere: Glass performance days, p. 610-614 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  69. The future of the all transparant pavilion concept

    van Noordenne, G., Romein, T. & Veer, FA., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 389-391 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  70. The joint for the all transparent pavilion

    Bos, FP., Veer, FA., Belis, J., van Nieuwenhuijzen, EJ. & Louter, PC., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 385-388 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  71. The laminated glass column

    van Nieuwenhuijzen, EJ., Bos, FP. & Veer, FA., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 420-423 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  72. The possibilities of glass bond adhesives

    Janssen, MJHC., Veer, FA. & Nägele, T., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 436-439 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  73. The relation between fracture morphology and failure strength in annealed glass

    Veer, FA. & Rodichev, Y., 2012, Proceedings of the 3rd Challenging Glass conference : conference on architectural and structural applications of glass. Bos, F., Louter, C., Nijsse, R. & Veer, F. (eds.). Lansdale: IOS Press, p. 597-606 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  74. The relation between hydrolysis and chemical environmental stress cracking of (block co)polyesters, (ook op CD ROM).

    Kuipers, NB., Janssen, M., Riemslag, AC., Dijkstra, K., Lange, RFM., Marissen, R., Veer, FA. & Bakker, A., 2003, Proc. 9th Int. Conf. on the Mechanical Behaviour of Materials (ICM9) (CD ROM), Genova, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). Geneve, Zwitserland: ICM9, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  75. The relation between pre-stress and failure stress in tempered glass

    Veer, FA. & Rodichev, YM., 2014, Challenging Glass 4: Structural Glass-Novel design methods and next generation products. Louter, C., Bos, F., Belis, J. & Lebet, JP. (eds.). Abingdon: Taylor & Francis, p. 731-738 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  76. The relation between shear lips and crack closure

    van Kranenburg, C., Veer, FA. & Zuidema, J., 2006, Proc. 9th International Fatigue Congress, Atlanta, USA. s.n. (ed.). S.l.: Elsevier, p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  77. The strenght of glass, effect of edge quality

    Veer, FA. & Zuidema, J., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 106-109 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  78. The strength and failure of glass in bending.

    Zuidema, J., Veer, FA. & Bos, FP., 2005, Glass processing days. Vitkala, J. (ed.). Tampere: GPD, p. 443-445 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  79. The strength of glass

    Veer, FA., van den Berg, A., van der Sluijs, MMA., Zuidema, J. & van Kranenburg, C., 2002, ECF 14 Fracture Mechanics Beyond 2000, Volume I/III. A Neimitz (ed.). p. #1-#8

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  80. The strength of glass, hidden damage

    Veer, FA. & Rodichev, YM., 2010, Challenging glass 2 : conference on architectural and structural applications of glass. Bos, FP., Louter, PC. & Veer, FA. (eds.). s.l.: s.n., p. 395-404 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  81. The strength of water jet cut glass

    Veer, FA. & Rodichev, YM., 2011, Glass performance days 2011 : 12th International conference on architectural and automotive glass. s.n. (ed.). Glaston, Finland: Glass performance days, p. 434-438 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  82. The structural feasibility of 3D-printing houses using printable polymers

    van der Veen, AC., Coenders, JL., Veer, FA., Nijsse, R., Houtman, R. & Schonwalder, J., 2015, Proceedings of the international association for shell and spatial structures (IASS). Borgart, A., Pronk, A. & Coenders, J. (eds.). Amsterdam: KIVI, p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  83. The use of glass in concrete as reinforcement and aggregate (ook op CD ROM).

    Hobbelman, GJ., van der Sluis, MMA., Veer, FA. & Zuidema, J., 2003, 9th Int. Conf. on the Mechanical Behaviour of Materials (ICM9), (CD ROM), Geneva, Switzerland, May 25-29, 2003.. Bodner, SR. (ed.). ICM9, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  84. Threshold measurements

    van Kranenburg, C., Veer, FA. & Zuidema, J., 2006, Proc. 9th International Fatigue Congress, Atlanta, USA. s.n. (ed.). s.l.: Elsevier, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  85. Transparent form-active system with structural glass

    Nikolaou, MSN., Veer, FA. & Eigenraam, P., 2015, Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium 2015, Amsterdam Future Visions. Rots, J. (ed.). Amsterdam: IASS, p. 1-13 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  86. Transparent laminated composites for novel architectural structures ( CD-rom)

    Veer, FA. & de Vries, SM., 2001, Composites from fundametals to exploitation. A Bunsell & J Morton (eds.). London: IOM Communications, p. #1-#9

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  87. Transparent polymer joints in glass structures

    Bos, FP. & Veer, FA., 2007, Glass performance days 2007, conference proceedings. s.n. (ed.). Tampere: Glass performance days, p. 62-67 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  88. Usage of cold bent glass panes as an approximation for doublecurved surfaces

    Vollers, KJ. & Veer, FA., 2003, Glass processing days / educational glass conference. Vitkala, J. (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 173-175 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  89. Using Ansys to conduct virtual prototyping in the graduate work of architectural engineering students

    Veer, FA., van Swieten, PMJ., Hobbelman, GJ. & van der Woord, J., 2001, Advances in design science and technology. R Beheshti (ed.). Parijs: Europia Productions, p. 243-249 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  90. Using transparent intumescent coating to increase the fire resistance of glass and glass laminates (zie ook BIM)

    Veer, FA., van der Voorden, M., Rijgersberg, HA. & Zuidema, J., 2001, Glass Processing Days. J Vitkala (ed.). Tampere, Finland: Glass processing days / tamglass ltd.Oy, p. 392-396 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  91. Vidro reforcado: Desenvolvimento de um sistema de ligacao inovador

    Carvalho, PLL., Cruz, PJS. & Veer, FA., 2013, IX congresso de construcao metalica e mista I Congresso Luso-Brasileiro de Construção Metálica Sustentável.. Simoes da Silva, L., Silvestre, N. & Santos, F. (eds.). Coimbra: Associação Portuguesa de Construção Metálica e Mista (CMM), p. 875-882 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  92. Walking on air, designing and engineering a glass bridge

    Veer, FA., Bosman, M., van Swieten, PMJ., Louter, PC. & Romein, T., 2007, Glass performance days 2007, conference proceedings. s.n. (ed.). Tampere: Glass performance days, p. 244-246 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  93. Conference contribution › Professional
  94. Design and experimental testing of the bundled glass column

    Oikonomopoulou, F., van den Broek, E. A. M., Bristogianni, T., Veer, F. & Nijsse, R., Jun 2017, Glass Performance Days 2017. Tampere, Finland, p. 141-142 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

  95. Innovative structural applications of adhesively bonded solid glass blocks

    Oikonomopoulou, F., Bristogianni, T., Nijsse, R. & Veer, FA., 2015, Glass performance days 2015. s.l. (ed.). s.l.: s.n., p. 256-261 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

  96. Modeling structural behaviour of a dry-assembled glass block bridge with soft PVC interlayer

    Snijder, A., Aurik, M., Veer, F., Louter, C. & Nijsse, R., 2016, Proceedings of the sixth International Conference on Structural Engineering, Mechanics and Computation. p. 1-4

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

  97. Variations in pre-stress in annealed, heat strengthened and fully tempered glass

    Veer, FA., 2015, Glass performance days 2015. s.l. (ed.). s.l.: s.n., p. 395-399 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

  98. Abstract › Scientific
  99. Bending strength and failure behaviour of welded borosilicate glass

    Veer, FA., Gezen, C., Bos, FP., Louter, PC. & Riemslag, AC., 2008, p. 328-328. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  100. Bending strength of annealed, heat strenghtened and fully tempered float glass

    Veer, FA., Louter, PC., Romein, T., van Ginkel, H. & Riemslag, AC., 2008, p. 327-327. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  101. Redundancy of composite glass beams at extreme conditions

    Louter, PC. & Veer, FA., 2008, p. 274-274. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  102. Patent › Other research output
  103. Heat treatment to produce homogeneous heat strengthened glass in all thicknesses of float glass

    Veer, F. & Bristogianni, T., 2018, IPC No. C03B, Priority date 10 Mar 2017, Priority No. NL 2018497

    Research output: PatentOther research output

  104. Safe structural glass elements

    Veer, FA., 2014, IPC No. OCT-12-014, Patent No. 2009159, Priority date 13 Jan 2014

    Research output: PatentOther research output

ID: 177311