1. 2020
  2. Applicability study of pulsed laser beam welding on ferritic–martensitic ODS eurofer steel

    Fu, J., van Slingerland, J., Brouwer, H., Bliznuk, V., Richardson, I. & Hermans, M., 2020, In : Metals. 10, 6, 9 p., 736.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Microstructure characterisation and mechanical properties of ODS Eurofer steel subject to designed heat treatments

    Fu, J., Brouwer, J. C., Hendrikx, R. W. A., Richardson, I. M. & Hermans, M. J. M., 2020, In : Materials Science and Engineering A. 770, 9 p., 138568.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering

    Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2020, Proceedings of the 149th Annual Meeting and Exhibition Supplemental (TMS 2020). Cham, Switzerland: Springer, p. 2095-2102 (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  5. 2019
  6. Effect of mechanical alloying and spark plasma sintering on the microstructure and mechanical properties of ODS Eurofer

    Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials and Design. 177, 12 p., 107849.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Evaluation of solidification cracking susceptibility during laser welding in advanced high strength automotive steels

    Agarwal, G., Kumar, A., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials and Design. 183, 12 p., 108104.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Joining of oxide dispersion strengthened Eurofer steel via spark plasma sintering

    Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials Letters. 256, 4 p., 126670.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Sensitivity of numerical predictions to the permeability coefficient in simulations of melting and solidification using the enthalpy-porosity method

    Ebrahimi, A., Kleijn, C. & Richardson, I., 2019, In : Energies. 12, 22, 18 p., 4360.

    Research output: Contribution to journalArticleScientificpeer-review

  10. The Influence of Surface Deformation on Thermocapillary Flow Instabilities in Low Prandtl Melting Pools with Surfactants

    Ebrahimi, A., Kleijn, C. & Richardson, I., 2019, Proceedings of the 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM'19): 6th International Conference on Heat Transfer and Fluid Flow. 8 p. 201

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. Welding in the world – update 2018

    Lippold, J. C., Böllinghaus, I. T. & Richardson, I., 2019, In : Welding in the World. 63, 1, 1 p.

    Research output: Contribution to journalEditorialProfessional

  12. 2018
  13. Experimental evidence of liquid feeding during solidification of a steel

    Agarwal, G., Amirthalingam, M., Moon, S. C., Dippenaar, R. J., Richardson, I. M. & Hermans, M. J. M., 2018, In : Scripta Materialia. 146, p. 105-109

    Research output: Contribution to journalArticleScientificpeer-review

  14. Investigation on hot cracking during laser welding by means of experimental and numerical methods

    Gao, H., Agarwal, G., Amirthalingam, M., Hermans, M. & Richardson, I., 2018, In : Welding in the World. 62, 1, p. 71-78

    Research output: Contribution to journalArticleScientificpeer-review

  15. Residual stress measurements and model validation of single and double pulse resistance spot welded advanced high strength steel

    Eftekharimilani, P., Gao, H., Huizenga, R., van der Aa, EM., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 401-415

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  16. Revealing internal flow behaviour in arc welding and additive manufacturing of metals

    Aucott, L., Dong, H., Mirihanage, W., Atwood, R., Kidess, A., Gao, S., Wen, S., Marsden, J., Feng, S., Tong, M., Connolley, T., Drakopoulos, M., Kleijn, C. R., Richardson, I. M., Browne, D. J., Mathiesen, R. H. & Atkinson, H. V., 2018, In : Nature Communications. 9, 7 p., 5414.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Study of solidification cracking in a transformation-induced plasticity-aided steel

    Agarwal, G., Kumar, A., Gao, H., Amirthalingam, M., Moon, S. C., Dippenaar, R. J., Richardson, I. M. & Hermans, M. J. M., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 4, p. 1015-1020

    Research output: Contribution to journalArticleScientificpeer-review

  18. Study of solidification cracking in advanced high strength automotive steels

    Agarwal, G., Gao, H., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 465-483

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. Understanding the effect of a paint bake cycle on the microstructure–mechanical properties relationship of a resistance spot welded advanced high strength steel

    Eftekharimilani, P., van der Aa, E. M., Petrov, R., Hermans, M. J. M. & Richardson, I. M., 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 12, p. 6185-6196

    Research output: Contribution to journalArticleScientificpeer-review

  20. 2017
  21. Arc welding and hybrid laser-arc welding

    Richardson, I., 2017, The Theory of Laser Materials Processing : Heat and Mass Transfer in Modern Technology. Dowden, J. & Schulz, W. (eds.). Second Edition ed. Cham, Switzerland: Springer, p. 189-239 (Springer Series in Materials Science; vol. 119).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  22. Control of welding distortion during gas metal arc welding of AH36 plates by stress engineering

    Pazooki, A. M. A., Hermans, M. & Richardson, I., 2017, In : International Journal of Advanced Manufacturing Technology. 88, 5, p. 1439 - 1457

    Research output: Contribution to journalArticleScientificpeer-review

  23. Finite element simulation and experimental investigation of thermal tensioning during welding of DP600 steel

    Pazooki, A. M. A., Hermans, M. & Richardson, I., 2017, In : Science and Technology of Welding and Joining . 22, 1, p. 7 - 21

    Research output: Contribution to journalArticleScientificpeer-review

  24. Microstructural characterisation of double pulse resistance spot welded advanced high strength steel

    Eftekharimilani, P., van der Aa, E. M., Hermans, M. J. M. & Richardson, I. M., 2017, In : Science and Technology of Welding and Joining . 22, 7, p. 545-554

    Research output: Contribution to journalArticleScientificpeer-review

  25. Microstructure and mechanical properties of CuAl8Ni6 produced by Wire Arc Additive Manufacturing for marine applications

    Ya, W., Goulas, K., Hamilton, K., Hermans, M., Römer, G-W. & Richardson, I., 2017.

    Research output: Contribution to conferenceOtherOther research output

  26. The microstructural evolution and elemental distribution of a 3rd generation 1 GPa advanced high strength steel during double pulse resistance spot welding

    Eftekharimilani, P., van der Aa, EM., Hermans, M. & Richardson, I., 2017, In : Welding in the World. 61, 4, p. 691 - 701

    Research output: Contribution to journalArticleScientificpeer-review

  27. 2015
  28. Accommodation of plastic deformation by ultrasound-induced grain rotation

    Dutta, RK., Petrov, RH., Hermans, MJM. & Richardson, IM., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 8, p. 3414-3422

    Research output: Contribution to journalArticleScientificpeer-review

  29. An integrated model for the post-solidification shape and grain morphology of fusion welds

    Kidess, A., Tong, MM., Duggan, G., Browne, DJ., Kenjeres, S., Richardson, IM. & Kleijn, CR., 2015, In : International Journal of Heat and Mass Transfer. 85, p. 667-678

    Research output: Contribution to journalArticleScientificpeer-review

  30. Elemental segregation during resistance spot welding of boron containing advanced high strength steels

    Amirthalingam, M., van der Aa, E., Kwakernaak, C., Hermans, MJM. & Richardson, IM., 2015, In : Welding in the World. 59, 5, p. 743-755

    Research output: Contribution to journalArticleScientificpeer-review

  31. Formation of nanostructures in severely deformed high-strength steel induced by high-frequency ultrasonic impact treatment

    Dutta, RK., Malet, L., Gao, H., Hermans, MJM., Godet, S. & Richardson, IM., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 2, p. 813-830

    Research output: Contribution to journalArticleScientificpeer-review

  32. Fracture toughness of welded thick section high strength steels and influencing factors

    Popovich, V. & Richardson, IM., 2015, TMS2015 Supplemental Proceedings - 144th Annual Meeting and Exhibition: Connecting the Global Minerals, Metals, and Materials Community. Srivatsan, TS. & Sano, T. (eds.). Warrendale, PA, USA: Wiley, p. 1031-1038

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  33. Improved resistance spot weldability of 3rd generation AHSS for automotive applications

    van der Aa, EM., Amirthalingam, M., Winter, J., Hanlon, DN., Hermans, MJM., Rijnders, M. & Richardson, IM., 2015, Proceedings 11th International Seminar on Numerical Analysis of Weldability. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Graz, Austria: TU Graz, p. - 19 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  34. Mechanical strength of silicon solar wafers characterized by ring-on-ring test in combination with digital image correlation

    Popovich, V., Geerstma, W., Janssen, M., Bennett, IJ. & Richardson, IM., 2015, Proceedings EPD Congress 2015-TMS 2015. Yurko, JA., Tripathy, P., Ikhmayies, S. & et al. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 241-248

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  35. Microstructure and mechanical properties of a screen-printed silver front side solar cell contact

    Popovich, V., Janssen, M., Bennett, IJ. & Richardson, IM., 2015, Proceedings EPD Congress 2015-TMS 2015. Yurko, JA., Tripathy, P., Ikhmayies, S. & et al. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 265-272

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  36. 2014
  37. Anisotropy in thermal expansion of bainitic ferrite

    Dutta, RK., Huizenga, RM., Gao, H., Amirthalingam, M., King, A., Hermans, MJM. & Richardson, IM., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 12, p. 5281-5285

    Research output: Contribution to journalArticleScientificpeer-review

  38. In situ synchrotron diffraction studies on peak broadening during bainitic transformation in a high strength quenched and tempered steel

    Dutta, RK., Huizenga, RM., Amirthalingam, M., Hermans, MJM., Gao, H., King, A. & Richardson, IM., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Heidelberg, Germany: Springer, p. 51-70

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  39. In-situ synchrotron diffraction studies on hot deformation of austenite in a high strength quenched and tempered structural steel

    Dutta, RK., Huizenga, RM., Murugaiyan, A., Gao, H., King, A., Hermans, MJM. & Richardson, IM., 2014, Proceedings 2013 8th international Conference on Processing and Manufacturing of Advanced Materials. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 126-131 (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  40. In-situ synchrotron diffraction studies on transformation strain development in a high strength quenched and tempered structural steel¿ Part II. Martensitic transformation

    Dutta, RK., Huizenga, RM., Petrov, RH., Murugaiyan, A., King, A., Gao, H., Hermans, MJM. & Richardson, IM., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 1, p. 230-238

    Research output: Contribution to journalArticleScientificpeer-review

  41. In-situ synchrotron diffraction studies on transformation strain development in a high strength quenched and tempered structural steel¿part I. Bainitic transformation

    Dutta, RK., Huizenga, RM., Murugaiyan, A., King, A., Gao, H., Hermans, MJM., Sietsma, J. & Richardson, IM., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 1, p. 218-229

    Research output: Contribution to journalArticleScientificpeer-review

  42. In-situ synchrotron difraction studies on the formation, decomposition and stabiisation of austenite in TRIP steels during simulated weld thermal cycles.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Heidelberg, Germany: Springer, p. 71-88

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  43. Pass-by-pass stress evolution in multipass welds

    Gao, H., Dutta, RK., Huizenga, RM., Amirthalingam, M., Hermans, MJM., Buslaps, T. & Richardson, IM., 2014, In : Science and Technology of Welding and Joining . 19, 3, p. 256-264

    Research output: Contribution to journalArticleScientificpeer-review

  44. Residual stress measurements in multi-pass welded high strength steel using energy dispersive synchrotron X-ray diffraction

    Gao, H., Huizenga, RM., Dutta, RK., Murugaiyan, A., Hermans, MJM., Buslaps, T. & Richardson, IM., 2014, Proceedings 2013 8th International Conference on Processing and Manufacturing of Advanced Materials. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 177-182 (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  45. Stress measurements on ultrasonic impact treated multi-pass welds using synchrotron X-ray diffraction

    Gao, H., Dutta, R., Huizenga, R., Amirthalingam, M., Hermans, M., Buslaps, T. & Richardson, I., 2014, Proceedings IWOTE'14 - Thermal Forming and Welding Distortion. Vollertsen, F. & Tetzel, H. (eds.). Bremen, Germany: Bias Verlag (Bremer Institut fur angewandte Strahltechnik), p. 71-82

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  46. Stress relaxation due to ultrasonic impact treatment on multi-pass welds

    Gao, H., Dutta, RK., Huizenga, RM., Amirthalingam, M., Hermans, MJM., Buslaps, T. & Richardson, IM., 2014, In : Science and Technology of Welding and Joining . 19, 6, p. 505-513

    Research output: Contribution to journalArticleScientificpeer-review

  47. Synchrotron diffraction studies on the transformation strain in a high strength quenched and tempered structural steel

    Dutta, RK., Huizenga, RM., Amirthalingam, M., Gao, H., King, A., Hermans, MJM. & Richardson, IM., 2014, Proceedings 7th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation. Holden, TM., Muransky, O. & Haamelin, CJ. (eds.). Pfaffikon, Switzerland: Trans Tech Publications, p. 231-236 (Materials Science Forum; vol. 777).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  48. 2013
  49. Ageing in retained austenite containing steels

    Amirthalingam, M., Bojack, A., Zhao, L., Hermans, MJM., Sietsma, J. & Richardson, IM., 2013.

    Research output: Contribution to conferencePosterProfessional

  50. Characterization of multicrystalline silicon solar wafers fracture strength and influencing factors

    Popovich, V., Riemslag, AC., Janssen, M., Bennett, IJ. & Richardson, IM., 2013, In : International Journal of Materials Science. 3, 1, p. 9-17

    Research output: Contribution to journalArticleScientificpeer-review

  51. Effect of enhanced heat and mass transport and flow reversal during cool down on weld pool shapes in laser spot welding of steel,

    Saldi, ZS., Kidess, A., Kenjeres, S., Zhao, C., Richardson, IM. & Kleijn, CR., 2013, In : International Journal of Heat and Mass Transfer. 66, nov 2013, p. 879-888

    Research output: Contribution to journalArticleScientificpeer-review

  52. In situ synchrotron diffraction studies on the temperature-dependent plane-specific elastic constants in a high-strength quenched and tempered structural steel.

    Dutta, RK., Huizenga, RM., Amirthalingam, M., King, A., Gao, H., Hermans, MJM. & Richardson, IM., 2013, In : Scripta Materialia. 69, p. 187-190

    Research output: Contribution to journalArticleScientificpeer-review

  53. Kinetics of bainitic transformation and transformation plasticity in a high strength quenched and tempered structural steel

    Dutta, RK., Amirthalingam, M., Hermans, MJM. & Richardson, IM., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing (online). 559, p. 86-95

    Research output: Contribution to journalArticleScientificpeer-review

  54. Laserlassen van verzinkt staal

    Pan, Y., Richardson, IM. & Luijendijk, T., 2013, In : Metaal Magazine. 51, 2, p. 16-19

    Research output: Contribution to journalArticleProfessional

  55. Multiscale, multiphysics numerical modeling of fusion welding with experimental characterization and validation

    Tong, M., Duggan, G., Liu, J., Xie, Y., Dodge, M., Aucott, L., Dong, HB., Dantzig, J., Barrera, O., Zhao, C., Richardson, IM., Kidess, A., Kleijn, CR., Wen, S. ., Barnett, R. & Browne, DJ., 2013, In : JOM. 65, 1, p. 99-106

    Research output: Contribution to journalArticleScientificpeer-review

  56. Phosphorous and boron segregation during resistance spot welding of advanced high strength steels

    Amirthalingam, M., den Uijl, NJ., van der Aa, EM., Hermans, MJM. & Richardson, IM., 2013, Trends in Welding Research, Proceedings of the 9th International Conference. DeRoy, T., David, SA., Koseki, T. & Basdeshia, H. (eds.). Chicago, Illinois: ASM International, p. 217-226

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  57. Simulation of multi-pass welding of high strength steel

    Gao, H., Dutta, RK., Hermans, MJM. & Richardson, IM., 2013, Mathematical Modelling of Weld Phenomena 10. Sommitsch, C. & Enzinger, N. (eds.). Graz, Austria: Verlag TU Graz, p. 167-184

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Previous 1 2 3 4 5 Next

ID: 126164