1. 2020
  2. Applicability study of pulsed laser beam welding on ferritic–martensitic ODS eurofer steel

    Fu, J., van Slingerland, J., Brouwer, H., Bliznuk, V., Richardson, I. & Hermans, M., 2020, In : Metals. 10, 6, 9 p., 736.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Microstructure characterisation and mechanical properties of ODS Eurofer steel subject to designed heat treatments

    Fu, J., Brouwer, J. C., Hendrikx, R. W. A., Richardson, I. M. & Hermans, M. J. M., 2020, In : Materials Science and Engineering A. 770, 9 p., 138568.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering

    Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2020, Proceedings of the 149th Annual Meeting and Exhibition Supplemental (TMS 2020). Cham, Switzerland: Springer, p. 2095-2102 (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  5. 2019
  6. Effect of mechanical alloying and spark plasma sintering on the microstructure and mechanical properties of ODS Eurofer

    Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials and Design. 177, 12 p., 107849.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Evaluation of solidification cracking susceptibility during laser welding in advanced high strength automotive steels

    Agarwal, G., Kumar, A., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials and Design. 183, 12 p., 108104.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Joining of oxide dispersion strengthened Eurofer steel via spark plasma sintering

    Fu, J., Brouwer, J. C., Richardson, I. M. & Hermans, M. J. M., 2019, In : Materials Letters. 256, 4 p., 126670.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Sensitivity of numerical predictions to the permeability coefficient in simulations of melting and solidification using the enthalpy-porosity method

    Ebrahimi, A., Kleijn, C. & Richardson, I., 2019, In : Energies. 12, 22, 18 p., 4360.

    Research output: Contribution to journalArticleScientificpeer-review

  10. The Influence of Surface Deformation on Thermocapillary Flow Instabilities in Low Prandtl Melting Pools with Surfactants

    Ebrahimi, A., Kleijn, C. & Richardson, I., 2019, Proceedings of the 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM'19): 6th International Conference on Heat Transfer and Fluid Flow. 8 p. 201

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. Welding in the world – update 2018

    Lippold, J. C., Böllinghaus, I. T. & Richardson, I., 2019, In : Welding in the World. 63, 1, 1 p.

    Research output: Contribution to journalEditorialProfessional

  12. 2018
  13. Experimental evidence of liquid feeding during solidification of a steel

    Agarwal, G., Amirthalingam, M., Moon, S. C., Dippenaar, R. J., Richardson, I. M. & Hermans, M. J. M., 2018, In : Scripta Materialia. 146, p. 105-109

    Research output: Contribution to journalArticleScientificpeer-review

  14. Investigation on hot cracking during laser welding by means of experimental and numerical methods

    Gao, H., Agarwal, G., Amirthalingam, M., Hermans, M. & Richardson, I., 2018, In : Welding in the World. 62, 1, p. 71-78

    Research output: Contribution to journalArticleScientificpeer-review

  15. Residual stress measurements and model validation of single and double pulse resistance spot welded advanced high strength steel

    Eftekharimilani, P., Gao, H., Huizenga, R., van der Aa, EM., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 401-415

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  16. Revealing internal flow behaviour in arc welding and additive manufacturing of metals

    Aucott, L., Dong, H., Mirihanage, W., Atwood, R., Kidess, A., Gao, S., Wen, S., Marsden, J., Feng, S., Tong, M., Connolley, T., Drakopoulos, M., Kleijn, C. R., Richardson, I. M., Browne, D. J., Mathiesen, R. H. & Atkinson, H. V., 2018, In : Nature Communications. 9, 7 p., 5414.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Study of solidification cracking in a transformation-induced plasticity-aided steel

    Agarwal, G., Kumar, A., Gao, H., Amirthalingam, M., Moon, S. C., Dippenaar, R. J., Richardson, I. M. & Hermans, M. J. M., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 4, p. 1015-1020

    Research output: Contribution to journalArticleScientificpeer-review

  18. Study of solidification cracking in advanced high strength automotive steels

    Agarwal, G., Gao, H., Amirthalingam, M., Richardson, I. & Hermans, M., 2018, Mathematical Modelling of Weld Phenomena 12. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Verlag der Technischen Universitat Graz, Vol. 12. p. 465-483

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. Understanding the effect of a paint bake cycle on the microstructure–mechanical properties relationship of a resistance spot welded advanced high strength steel

    Eftekharimilani, P., van der Aa, E. M., Petrov, R., Hermans, M. J. M. & Richardson, I. M., 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 12, p. 6185-6196

    Research output: Contribution to journalArticleScientificpeer-review

  20. 2017
  21. Arc welding and hybrid laser-arc welding

    Richardson, I., 2017, The Theory of Laser Materials Processing : Heat and Mass Transfer in Modern Technology. Dowden, J. & Schulz, W. (eds.). Second Edition ed. Cham, Switzerland: Springer, p. 189-239 (Springer Series in Materials Science; vol. 119).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  22. Control of welding distortion during gas metal arc welding of AH36 plates by stress engineering

    Pazooki, A. M. A., Hermans, M. & Richardson, I., 2017, In : International Journal of Advanced Manufacturing Technology. 88, 5, p. 1439 - 1457

    Research output: Contribution to journalArticleScientificpeer-review

  23. Finite element simulation and experimental investigation of thermal tensioning during welding of DP600 steel

    Pazooki, A. M. A., Hermans, M. & Richardson, I., 2017, In : Science and Technology of Welding and Joining . 22, 1, p. 7 - 21

    Research output: Contribution to journalArticleScientificpeer-review

  24. Microstructural characterisation of double pulse resistance spot welded advanced high strength steel

    Eftekharimilani, P., van der Aa, E. M., Hermans, M. J. M. & Richardson, I. M., 2017, In : Science and Technology of Welding and Joining . 22, 7, p. 545-554

    Research output: Contribution to journalArticleScientificpeer-review

  25. Microstructure and mechanical properties of CuAl8Ni6 produced by Wire Arc Additive Manufacturing for marine applications

    Ya, W., Goulas, K., Hamilton, K., Hermans, M., Römer, G-W. & Richardson, I., 2017.

    Research output: Contribution to conferenceOtherOther research output

  26. The microstructural evolution and elemental distribution of a 3rd generation 1 GPa advanced high strength steel during double pulse resistance spot welding

    Eftekharimilani, P., van der Aa, EM., Hermans, M. & Richardson, I., 2017, In : Welding in the World. 61, 4, p. 691 - 701

    Research output: Contribution to journalArticleScientificpeer-review

  27. 2015
  28. Accommodation of plastic deformation by ultrasound-induced grain rotation

    Dutta, RK., Petrov, RH., Hermans, MJM. & Richardson, IM., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 8, p. 3414-3422

    Research output: Contribution to journalArticleScientificpeer-review

  29. An integrated model for the post-solidification shape and grain morphology of fusion welds

    Kidess, A., Tong, MM., Duggan, G., Browne, DJ., Kenjeres, S., Richardson, IM. & Kleijn, CR., 2015, In : International Journal of Heat and Mass Transfer. 85, p. 667-678

    Research output: Contribution to journalArticleScientificpeer-review

  30. Elemental segregation during resistance spot welding of boron containing advanced high strength steels

    Amirthalingam, M., van der Aa, E., Kwakernaak, C., Hermans, MJM. & Richardson, IM., 2015, In : Welding in the World. 59, 5, p. 743-755

    Research output: Contribution to journalArticleScientificpeer-review

  31. Formation of nanostructures in severely deformed high-strength steel induced by high-frequency ultrasonic impact treatment

    Dutta, RK., Malet, L., Gao, H., Hermans, MJM., Godet, S. & Richardson, IM., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 2, p. 813-830

    Research output: Contribution to journalArticleScientificpeer-review

  32. Fracture toughness of welded thick section high strength steels and influencing factors

    Popovich, V. & Richardson, IM., 2015, TMS2015 Supplemental Proceedings - 144th Annual Meeting and Exhibition: Connecting the Global Minerals, Metals, and Materials Community. Srivatsan, TS. & Sano, T. (eds.). Warrendale, PA, USA: Wiley, p. 1031-1038

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  33. Improved resistance spot weldability of 3rd generation AHSS for automotive applications

    van der Aa, EM., Amirthalingam, M., Winter, J., Hanlon, DN., Hermans, MJM., Rijnders, M. & Richardson, IM., 2015, Proceedings 11th International Seminar on Numerical Analysis of Weldability. Sommitsch, C., Enzinger, N. & Mayr, P. (eds.). Graz, Austria: TU Graz, p. - 19 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  34. Mechanical strength of silicon solar wafers characterized by ring-on-ring test in combination with digital image correlation

    Popovich, V., Geerstma, W., Janssen, M., Bennett, IJ. & Richardson, IM., 2015, Proceedings EPD Congress 2015-TMS 2015. Yurko, JA., Tripathy, P., Ikhmayies, S. & et al. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 241-248

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  35. Microstructure and mechanical properties of a screen-printed silver front side solar cell contact

    Popovich, V., Janssen, M., Bennett, IJ. & Richardson, IM., 2015, Proceedings EPD Congress 2015-TMS 2015. Yurko, JA., Tripathy, P., Ikhmayies, S. & et al. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 265-272

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  36. 2014
  37. Anisotropy in thermal expansion of bainitic ferrite

    Dutta, RK., Huizenga, RM., Gao, H., Amirthalingam, M., King, A., Hermans, MJM. & Richardson, IM., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 12, p. 5281-5285

    Research output: Contribution to journalArticleScientificpeer-review

  38. In situ synchrotron diffraction studies on peak broadening during bainitic transformation in a high strength quenched and tempered steel

    Dutta, RK., Huizenga, RM., Amirthalingam, M., Hermans, MJM., Gao, H., King, A. & Richardson, IM., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Heidelberg, Germany: Springer, p. 51-70

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  39. In-situ synchrotron diffraction studies on hot deformation of austenite in a high strength quenched and tempered structural steel

    Dutta, RK., Huizenga, RM., Murugaiyan, A., Gao, H., King, A., Hermans, MJM. & Richardson, IM., 2014, Proceedings 2013 8th international Conference on Processing and Manufacturing of Advanced Materials. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 126-131 (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  40. In-situ synchrotron diffraction studies on transformation strain development in a high strength quenched and tempered structural steel¿ Part II. Martensitic transformation

    Dutta, RK., Huizenga, RM., Petrov, RH., Murugaiyan, A., King, A., Gao, H., Hermans, MJM. & Richardson, IM., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 1, p. 230-238

    Research output: Contribution to journalArticleScientificpeer-review

  41. In-situ synchrotron diffraction studies on transformation strain development in a high strength quenched and tempered structural steel¿part I. Bainitic transformation

    Dutta, RK., Huizenga, RM., Murugaiyan, A., King, A., Gao, H., Hermans, MJM., Sietsma, J. & Richardson, IM., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 1, p. 218-229

    Research output: Contribution to journalArticleScientificpeer-review

  42. In-situ synchrotron difraction studies on the formation, decomposition and stabiisation of austenite in TRIP steels during simulated weld thermal cycles.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Heidelberg, Germany: Springer, p. 71-88

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  43. Pass-by-pass stress evolution in multipass welds

    Gao, H., Dutta, RK., Huizenga, RM., Amirthalingam, M., Hermans, MJM., Buslaps, T. & Richardson, IM., 2014, In : Science and Technology of Welding and Joining . 19, 3, p. 256-264

    Research output: Contribution to journalArticleScientificpeer-review

  44. Residual stress measurements in multi-pass welded high strength steel using energy dispersive synchrotron X-ray diffraction

    Gao, H., Huizenga, RM., Dutta, RK., Murugaiyan, A., Hermans, MJM., Buslaps, T. & Richardson, IM., 2014, Proceedings 2013 8th International Conference on Processing and Manufacturing of Advanced Materials. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 177-182 (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  45. Stress measurements on ultrasonic impact treated multi-pass welds using synchrotron X-ray diffraction

    Gao, H., Dutta, R., Huizenga, R., Amirthalingam, M., Hermans, M., Buslaps, T. & Richardson, I., 2014, Proceedings IWOTE'14 - Thermal Forming and Welding Distortion. Vollertsen, F. & Tetzel, H. (eds.). Bremen, Germany: Bias Verlag (Bremer Institut fur angewandte Strahltechnik), p. 71-82

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  46. Stress relaxation due to ultrasonic impact treatment on multi-pass welds

    Gao, H., Dutta, RK., Huizenga, RM., Amirthalingam, M., Hermans, MJM., Buslaps, T. & Richardson, IM., 2014, In : Science and Technology of Welding and Joining . 19, 6, p. 505-513

    Research output: Contribution to journalArticleScientificpeer-review

  47. Synchrotron diffraction studies on the transformation strain in a high strength quenched and tempered structural steel

    Dutta, RK., Huizenga, RM., Amirthalingam, M., Gao, H., King, A., Hermans, MJM. & Richardson, IM., 2014, Proceedings 7th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation. Holden, TM., Muransky, O. & Haamelin, CJ. (eds.). Pfaffikon, Switzerland: Trans Tech Publications, p. 231-236 (Materials Science Forum; vol. 777).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  48. 2013
  49. Ageing in retained austenite containing steels

    Amirthalingam, M., Bojack, A., Zhao, L., Hermans, MJM., Sietsma, J. & Richardson, IM., 2013.

    Research output: Contribution to conferencePosterProfessional

  50. Characterization of multicrystalline silicon solar wafers fracture strength and influencing factors

    Popovich, V., Riemslag, AC., Janssen, M., Bennett, IJ. & Richardson, IM., 2013, In : International Journal of Materials Science. 3, 1, p. 9-17

    Research output: Contribution to journalArticleScientificpeer-review

  51. Effect of enhanced heat and mass transport and flow reversal during cool down on weld pool shapes in laser spot welding of steel,

    Saldi, ZS., Kidess, A., Kenjeres, S., Zhao, C., Richardson, IM. & Kleijn, CR., 2013, In : International Journal of Heat and Mass Transfer. 66, nov 2013, p. 879-888

    Research output: Contribution to journalArticleScientificpeer-review

  52. In situ synchrotron diffraction studies on the temperature-dependent plane-specific elastic constants in a high-strength quenched and tempered structural steel.

    Dutta, RK., Huizenga, RM., Amirthalingam, M., King, A., Gao, H., Hermans, MJM. & Richardson, IM., 2013, In : Scripta Materialia. 69, p. 187-190

    Research output: Contribution to journalArticleScientificpeer-review

  53. Kinetics of bainitic transformation and transformation plasticity in a high strength quenched and tempered structural steel

    Dutta, RK., Amirthalingam, M., Hermans, MJM. & Richardson, IM., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing (online). 559, p. 86-95

    Research output: Contribution to journalArticleScientificpeer-review

  54. Laserlassen van verzinkt staal

    Pan, Y., Richardson, IM. & Luijendijk, T., 2013, In : Metaal Magazine. 51, 2, p. 16-19

    Research output: Contribution to journalArticleProfessional

  55. Multiscale, multiphysics numerical modeling of fusion welding with experimental characterization and validation

    Tong, M., Duggan, G., Liu, J., Xie, Y., Dodge, M., Aucott, L., Dong, HB., Dantzig, J., Barrera, O., Zhao, C., Richardson, IM., Kidess, A., Kleijn, CR., Wen, S. ., Barnett, R. & Browne, DJ., 2013, In : JOM. 65, 1, p. 99-106

    Research output: Contribution to journalArticleScientificpeer-review

  56. Phosphorous and boron segregation during resistance spot welding of advanced high strength steels

    Amirthalingam, M., den Uijl, NJ., van der Aa, EM., Hermans, MJM. & Richardson, IM., 2013, Trends in Welding Research, Proceedings of the 9th International Conference. DeRoy, T., David, SA., Koseki, T. & Basdeshia, H. (eds.). Chicago, Illinois: ASM International, p. 217-226

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  57. Simulation of multi-pass welding of high strength steel

    Gao, H., Dutta, RK., Hermans, MJM. & Richardson, IM., 2013, Mathematical Modelling of Weld Phenomena 10. Sommitsch, C. & Enzinger, N. (eds.). Graz, Austria: Verlag TU Graz, p. 167-184

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  58. Simulation of transient force and strain during thermal mechanical testing relevant to the HAZ in multi-pass welds

    Gao, H., Hermans, MJM. & Richardson, IM., 2013, In : Science and Technology of Welding and Joining . 18, 6, p. 525-531

    Research output: Contribution to journalArticleScientificpeer-review

  59. The effect of tensile deformation by in situ ultrasonic treatment on the microstructure of low-carbon steel.

    Dutta, RK., Petrov, RH., Delhez, R., Hermans, MJM., Richardson, IM. & Bottger, AJ., 2013, In : Acta Materialia. 61, 5, p. 1592-1602

    Research output: Contribution to journalArticleScientificpeer-review

  60. Transformation-induced diffraction peak broadening during bainitic and martensitic transformations under small external loads in a quenched and tempered high strength steel

    Dutta, RK., Huizenga, RM., Amirthalingam, M., Hermans, MJM., King, A. & Richardson, IM., 2013, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 9, p. 4011-4014

    Research output: Contribution to journalArticleScientificpeer-review

  61. Understanding the properties of silicon solar cell aluminum contact layers and its effect on mechanical stability

    Popovich, V., van Maris, M. P. F. H. L., Janssen, M., Bennett, IJ. & Richardson, IM., 2013, In : Materials Sciences and Applications (online). 4, p. 118-127

    Research output: Contribution to journalArticleScientificpeer-review

  62. 2012
  63. Experimental and numerical investigation of residual stress and distortion control during welding of AISI-316L plates

    Pazooki, A. M. A., Hermans, MJM. & Richardson, IM., 2012, Thermec 2011 International conference on processing and manufacturing of advanced materials. Chandra, T., Ionescu, M. & Mantovani, D. (eds.). s.l.: Trans Tech Publications, p. 2950-2955 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  64. In-situ synchrotron diffraction studies on the formation, stabilisation and decomposition of austenite in trip steels during simulated weld thermal cycles

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2012, Proceedings of the Visual-JW2012. s.n. (ed.). s.l.: s.n., p. 1-2 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  65. In-situsynchrotron diffraction studies on the kinetics of bainiticTransformation and transformation plasticity in a high strength quenched and tempered structural steel

    Dutta, RK., Huizenga, RM., Hermans, MJM., Amirthalingam, M., Gao, H., King, A. & Richardson, IM., 2012, Visual-JW2012. s.n. (ed.). s.l.: s.n., p. 202-203 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  66. Multi-scale multi-physics numerical modelling of fusion welding with experimental characterisation and validation

    Tong, M., Duggan, G., Liu, J., Xie, Y., Dodge, M., Aucott, L., Dong, HB., Davidchack, RL., Dantzig, J., Barrera, O., Cocks, ACF., Kitaguchi, H., Lozano-Perez, S., Zhao, C., Richardson, IM., Kidess, A., Kleijn, CR., Wen, SW., Barnett, R. & Browne, DJ., 2012, In : JOM. 65, 1, p. 99-106 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Residual and bending stress measurements by X-ray diffraction and synchrotron diffraction analysis in silicon solar cells

    Popovich, V., van der Pers, NM., Janssen, M., Bennett, IJ., Jansen, KMB., Wright, J. & Richardson, IM., 2012, Photovoltaic Specialists Conference (PVSC), 2012 38th IEEE. IEEE, p. 442-447 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  68. Synchrotron diffraction analysis of retained austenite in welded transformation induced plasticity (TRIP) steels.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Richardson, IM. & Gundlach, C., 2012, In : Science and Technology of Welding and Joining . 17, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. 2011
  70. Distortion control during welding of AH36 plates

    Akbari Pazooki, AM., Hermans, MJM. & Richardson, IM., 2011, Proceedings of the IIW International Conference on Global Trends in Joining, Cutting and Surfacing Technology, Chennai, India, 21-22 July 2011. Kulkarni, DV., Samant, M., Krishnan, S., De, A., Krishnan, J., Patel, H. & Bhaduri, AK. (eds.). New Delhi, India: Narosa Publishing House Pvt Ltd, p. 695-703 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  71. Effect of silicon solar cell processing parameters and crystallinity on mechanical strength

    Popovich, V., Yunus, A., Janssen, M., Richardson, IM. & Bennett, IJ., 2011, In : Solar Energy Materials & Solar Cells. 95, p. 97-100 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Effects of controlled atmosphere on non-metallic inclusions in laser welded TRIP steel. Master thesis TU Delft

    Katsiorchis, A. & Richardson, IM., 2011, Delft: Delft University of Technology.

    Research output: ThesisDissertation (external)

  73. Intermetallic compounds and intermetallic layers in AISI 316L and Al 1050 joints. Master thesis TU Delft

    Ya, W. & Richardson, IM., 2011, Delft: Delft University of Technology.

    Research output: ThesisDissertation (external)

  74. Keyhole behaviour during laser welding of zinc-coated steel

    Pan, Y. & Richardson, IM., 2011, In : Journal of Physics D: Applied Physics. 44, 4, p. 45502-45512 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Microstructure and mechanical properties of aluminum back contact layers

    Popovich, V., Janssen, M., Richardson, IM., van Amstel, T. & Bennett, IJ., 2011, In : Solar Energy Materials & Solar Cells. 95, p. 93-96 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Numerical investigation of the influence of hardening models on the residual stress distribution and distortion prediction of DP600 butt welds

    Akbari Pazooki, AM., Hermans, MJM. & Richardson, IM., 2011, Proceedings of the IIW International Conference on Global Trends in Joining, Cutting and Surfacing Technology, Chennai, India, 21-22 July 2011. Kulkarni, DV., Samant, M., Krishnan, S., De, A., Krishnan, J., Patel, H. & Bhaduri, AK. (eds.). New Delhi, India: Narosa Publishing House Pvt Ltd, p. 859-864 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  77. Numerical investigation of the influence of microstructure on the residual stress distribution and distortion in DP600 welds

    Akbari Pazooki, AM., Hermans, MJM. & Richardson, IM., 2011, In : Materials Science Forum. 681, p. 79-84 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Raman spectroscopy characterization of residual stress in multicrystalline silicon solar wafers and solar cells: relation to microstructure, defects and processing conditions

    Popovich, V., Westra, JM., van Swaaij, RACMM., Janssen, M., Bennett, IJ. & Richardson, IM., 2011, Proceedings 37th IEEE Photovoltaic Specialists Conference. Wilt, D. (ed.). Piscataway, NJ, USA: IEEE Society, p. 1668-1673 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  79. Reduction of welding distortion in DP600 steel by manipulation of temperature distribution during welding

    Akbari Pazooki, AM., Hermans, MJM. & Richardson, IM., 2011, Proceedings of the IWOTE'11: International Workshop on Thermal Forming and Welding distortion, Bremen, Germany, 6-7 April 2011. Vollertsen, F. (ed.). Bremen: Bias Verlag (Bremer Institut fur angewandte Strahltechnik), p. 181-202 22 p. (Strahltechnik; vol. 41).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  80. Stress measurement by X-ray diffraction in multicrystalline silicon solar cells

    Popovich, V., van der Pers, NM., Janssen, M., Bennett, IJ. & Richardson, IM., 2011, Proceedings 37th IEEE Photovoltaic Specialists Conference, Seattle, USA, 19-24 June 2011. s.n. (ed.). s.l.: IEEE Society, p. 1-5 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  81. Welding distortion of a transverse control arm

    Schenk, T., Gorzkulla, T., Hofman, JT. & Richardson, IM., 2011, Proceedings of the IWOTE'11: International Workshop on Thermal Forming and Welding distortion, Bremen, Germany, 6-7 April 2011. Vollertsen, F. (ed.). Bremen: Bias Verlag (Bremer Institut fur angewandte Strahltechnik), p. 49-62 14 p. (Strahltechnik; vol. 41).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  82. 2010
  83. Application of x-ray computed tomography in silicon solar cells

    Popovich, V., Verwaal, W., Janssen, M., Bennett, IJ. & Richardson, IM., 2010, Proceedings 35th IEEE Photovoltaic Specialists Conference (PVSC), June 20-25, 2010, Honolulu, Hawaii. Meakin, JD. (ed.). IEEE Society, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  84. Bead on plate laser brazing of dual phase steel with two copper based consumables

    Janssen, MHE., Janssen, M., Hermans, MJM. & Richardson, IM., 2010, In : Science and Technology of Welding and Joining . 15, 3, p. 248-253 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Effect of microstructure and processing parameters on mechanical strength of multicrystalline silicon solar cells

    Popovich, V., Yunus, A., Janssen, M., Bennett, IJ. & Richardson, IM., 2010, Proceedings 35th IEEE Photovoltaic Specialists Conference (PVSC), June 20-25, 2010, Honolulu, Hawaii. Meakin, JD. (ed.). IEEE Society, p. 1-5 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  86. Effect of silicon solar cel processing parameters and crystallinity on mechanical strength

    Popovich, V., Yunus, A., Janssen, M., Richardson, IM. & Bennett, IJ., 2010, Proceedings 19th International Photovoltaic Science and Engineering Conference and Exhibition (PVSEC-19), November 9-13, 2009, Jeju, Korea. s.n. (ed.). s.l.: PVSEC, p. 1-4 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  87. Fatigue performance of laser brazes in advanced high strength steels

    Janssen, MHE., Hermans, MJM., Janssen, M. & Richardson, IM., 2010, In : Materials Science Forum. 638-642, p. 3254-3259 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Fatigue properties of laser-brazed joints of dual phase and transformation induced plasticity steel with a copper-aluminium consumable

    Janssen, MHE., Hermans, MJM., Janssen, M. & Richardson, IM., 2010, In : Materials and Design. 31, p. 3922-3928 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. In situ phase transformation studies on a transformation induced plasticity steel under simulated weld thermal cycles using synchrotron diffraction

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2010, In-situ Studies with Photons, Neutrons and Electrons. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, JA. (eds.). Berlin Heidelberg: Springer, p. 133-148 204 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  90. Influence of clamping support distance on distortion of welded T joints

    Schenk, T., Doig, M., Esser, G. & Richardson, IM., 2010, In : Science and Technology of Welding and Joining . 15, 7, p. 575-582 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Influence of the hardening model on the predicted welding distortion of DP600 lap joints

    Schenk, T., Richardson, IM., Esser, G. & Kraska, M., 2010, In : Materials Science Forum. 638-642, p. 3710-3715 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Marangoni driven free surface microflows in liquid weld pools

    Saldi, ZS., Kidess, A., Kenjeres, S., Kleijn, CR., Zhao, C. & Richardson, IM., 2010, Proceedings of the 2nd european conference on microfluidics. Colin, S. & Morini, GL. (eds.). Toulouse: microfluidics toulouse, p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  93. Mechanical strength of multicrystalline silicon solar cells and influencing factors

    Popovich, V., Yunus, A., Janssen, M., Bennett, IJ. & Richardson, IM., 2010, Proceedings 25th European Photovoltaic Solar Energy Conference and Exhibition / 5th World Confererence on Photovoltaic Energy Conversion, September 6-10, 2010, Valencia, Spain. s.n. (ed.). s.l.: EUPVSEC, p. 2631-2636 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  94. Microstructural evolution during gas tungsten arc, laser and resistance spot welding of Al-containing transformation induced plasticity (TRIP) steel

    Amirthalingam, M., Hermans, MJM. & Richardson, IM., 2010, In : Advanced Materials Research. 89-91, p. 23-28 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Microstructure and mechanical properties of aluminium back contact layers

    Popovich, V., Janssen, M., Richardson, IM., van Amstel, T. & Bennett, IJ., 2010, Proceedings 19th International Photovoltaic Science and Engineering Conference and Exhibition (PVSEC-19), November 9-13, 2009, Jeju, Korea. s.n. (ed.). s.l.: PVSEC, p. 1-4 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  96. Modelling clamping conditions for welding simulations of 1 mm thick DP600 overlap joints

    Schenk, T., Kraska, M., Ohnimus, S. & Richardson, IM., 2010, Mathematical modelling of weld phenomena 9 - Proceedings 9th International Seminar on Numerical Analysis of Weldability, September 28-30, 2009, Schloss Seggau, Graz, Austria. Cerjak, H. & Enzinger, N. (eds.). Graz, Austria: Technische Universitat Graz, p. 675-698 24 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  97. Numerical and experimental studies of free surface flow reversals in liquid steel welding pools

    Saldi, ZS., Zhao, C., Kenjeres, S., Richardson, IM. & Kleijn, CR., 2010, Mathematical Modelling of Weld Phenomena 9 - Proceedings 9th International Seminar on Numerical Analysis of Weldability, September 28-30, 2009, Schloss Seggau, Graz, Austria. Cerjak, H. & Enzinger, N. (eds.). Graz, Austria: Technische Universitat Graz, p. 21-31 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  98. Onderzoek naar de werking van het CeOr gasbesparingssysteem en de daarmee te behalen besparingen in beschermgas

    Luijendijk, T., Richardson, IM. & van Slingerland, J., 2010, Delft: Delft University of Technology.

    Research output: Book/ReportReportProfessional

  99. Quantitative analysis of microstructural constituents in welded transformation-induced-plasticity steels

    Amirthalingam, M., Hermans, MJM., Zhao, L. & Richardson, IM., 2010, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 41A, 2, p. 431-439 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Simplified models for welding simulations with controlled accuracy

    Schenk, T., Tikhomirov, D., Kraska, M. & Richardson, IM., 2010, Mathematical modelling of weld phenomena 9 - Proceedings 9th International Seminar on Numerical Analysis of Weldability, September 28-30, 2009, Schloss Seggau, Graz, Austria. Cerjak, H. & Enzinger, N. (eds.). Graz, Austria: Technische Universitat Graz, p. 523-549 27 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  101. The effect of oxygen on transitional Marangoni flow in laser spot welding

    Zhao, C., Kwakernaak, C., Pan, Y., Richardson, IM., Saldi, ZS., Kenjeres, S. & Kleijn, CR., 2010, In : Acta Materialia. 58, p. 6345-6357 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. The influence of welding on advanced high strength TRIP and dual phase steels

    Richardson, IM., Amirthalingam, M., Hermans, MJM., den Uijl, NJ. & Wibowo, MK., 2010, Mathematical modelling of weld phenomena 9 - Proceedings 9th International Seminar on Numerical Analysis of Weldability, September 28-30, 2009, Schloss Seggau, Graz, Austria. Cerjak, H. & Enzinger, N. (eds.). Graz, Austria: Technische Universitat Graz, p. 185-214 30 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  103. Transient thermal tensioning during welding

    Akbari Pazooki, AM., Hermans, MJM. & Richardson, IM., 2010, Mathematical modelling of weld phenomena 9 - Proceedings 9th International Seminar on Numerical Analysis of Weldability, September 28-30, 2009, Schloss Seggau, Graz, Austria. Cerjak, H. & Enzinger, N. (eds.). Graz, Austria: Technische Universitat Graz, p. 391-414 24 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  104. Unstable contact line spreading of liquid stainless steel

    Zhao, C., Richardson, IM., Song, G., Pan, Y., Kenjeres, S., Saldi, ZS. & Kleijn, CR., 2010, p. 42-42. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  105. 2009
  106. A stereo vision method for tracking particle flow on the weld pool surface

    Zhao, C., Richardson, IM., Kenjeres, S., Kleijn, CR. & Saldi, ZS., 2009, In : Journal of Applied Physics. 105, 123104, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  107. AIAA 2009-3739: Complex flow motions during laser welding

    Zhao, C. & Richardson, IM., 2009, Proceedings 40th AIAA Plasmadynamics and Lasers Conference, San Antonio, Texas, USA, 22-25 June 2009. s.n. (ed.). San Antonio, Texas: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  108. Characterization of brazed joints on threaded X52 steel pipe connections

    Afshar, FN. & Richardson, IM., 2009, Delft University of Technology.

    Research output: ThesisDissertation (external)

  109. Fatigue properties of laser brazed joints of DP and TRIP steel with a copper-aluminium consumable

    Janssen, MHE., Hermans, MJM., Janssen, M. & Richardson, IM., 2009, Proceedings 12th International Conference on Fracture (ICF12), Ottawa, Canada, 12-17 July, 2009. ICF12 (ed.). Ottawa, Canada: ICF, p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  110. Heat distribution in resistance upset butt welding

    Kerstens, NFH. & Richardson, IM., 2009, In : Journal of Materials Processing Technology. 209, 5, p. 2715-2722 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  111. Influence of clamping on distortion of welded S355 T-joints

    Schenk, T., Richardson, IM., Kraska, M. & Ohnimus, S., 2009, In : Science and Technology of Welding and Joining . 14, 4, p. 669-675 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  112. Interface development in laser brazed DP600 and TRIP steels with two copper-based consumables

    Janssen, MHE., Janssen, M., Hermans, MJM. & Richardson, IM., 2009, Brazing and Soldering, Proceedings of the 4th International Brazing and Soldering Conference, Orlando, Florida, USA, 26-29 April, 2009. Rabinkin, A., Gourley, R. & Walker, C. (eds.). USA: ASM International, p. 254-261 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  113. Lasprocessen voortdurend in ontwikkeling

    Richardson, IM. & Luijendijk, T., 2009, In : Lastechniek. 75, 6, p. 38-43 6 p.

    Research output: Contribution to journalArticleProfessional

  114. Liquid metal flow behaviour during conduction laser spot welding

    Zhao, C., Richardson, IM. & Pan, Y., 2009, Proceedings of the IIW International Conference on Advances in Welding in Allied Technologies, Singapore, 16-17 July, 2009. Sun, Z. (ed.). Singapore: Singapore Welding Society, p. 271-275 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  115. Mechanical behavior of multicrystalline silicon solar cells

    Azwar, Y. & Richardson, IM., 2009, Delft University of Technology.

    Research output: ThesisDissertation (external)

  116. Microstructural and mechanical characterisation of Al back contact layers and its application to thermomechanical multiscale modeling of solar cells

    Popovich, V., van Amstel, T., Bennett, IJ., Janssen, M. & Richardson, IM., 2009, Proceedings 34th IEEE Photovoltaic Specialists Conference, Philadelphia, USA, June 7-12, 2009. s.n. (ed.). Philadelphia, USA: IEEE Society, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  117. Microstructural development during welding of silicon- and aluminum-based transformation-induced plasticity steels - Inclusion and elemental partitioning analysis

    Murugaiyan, A., Hermans, MJM. & Richardson, IM., 2009, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 40, 4, p. 901-909 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  118. Microstructure and mechanical properties of aluminium back contact layers

    Popovich, V., Janssen, M., Richardson, IM., van Amstel, T. & Bennett, IJ., 2009, Proceedings 24th European Photovoltaic Solar Energy Conference (EPVSEC) , Hamburg, Germany, September 21-25, 2009. s.n. (ed.). Hamburg, Germany: EPVSEC, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  119. Modeling buckling distortion of DP600 overlap joints due to gas metal arc welding and the influence of the mesh density

    Schenk, T., Richardson, IM., Kraska, M. & Ohnimus, S., 2009, In : Computational Materials Science. 46, p. 977-986 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  120. Non-isothermal thermomechanical metallurgical model and its application to welding simulations

    Schenk, T., Richardson, IM., Kraska, M. & Ohnimus, S., 2009, In : Science and Technology of Welding and Joining . 14, 2, p. 152-160 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  121. Numerical and experimental investigations of marangoni driven flow reversals in liquid steel welding pools

    Saldi, ZS., Zhao, C., Kenjeres, S., Richardson, IM. & Kleijn, CR., 2009, Proceedings 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Krakow, Poland, June 28-July 3rd, 2009. Szmyd, JS., Spalek, J. & Kowalewski, TA. (eds.). Krakow: AGH University, p. 1961-1968 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  122. Observations on droplet and arc behaviour during pulsed GMAW

    Yudodibroto, BY., Hermans, MJM., den Ouden, G. & Richardson, IM., 2009, In : Welding in the World. 53, 7/8, p. R171-R180

    Research output: Contribution to journalArticleScientificpeer-review

  123. The influence of zinc vapour on the melt pool in laser lap joining of zinc coated sheet steel

    Pan, Y. & Richardson, IM., 2009, Proceedings of the IIW International Conference on Advances in Welding in Allied Technologies, Singapore, 16-17 July, 2009. Sun, Z. (ed.). Singapore: Singapore Welding Society, p. 335-339 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  124. Unsteady interfacial phenomena during inward weld pool flow with an active surface oxide

    Zhao, C., van Steijn, V., Richardson, IM., Kleijn, CR., Kenjeres, S. & Saldi, ZS., 2009, In : Science and Technology of Welding and Joining . 14, 2, p. 132-140 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  125. 2008
  126. A stereo vision visualization method in welding

    Zhao, C., Richardson, IM., Kleijn, CR., Kenjeres, S. & Saldi, ZS., 2008, Proceedings International Conference of Numerical Analysis and Applied Mathematics 2008, Kos, Greece, 16-20 September, 2008. Simos, TE., Psihoyios, G. & Tsitouras, C. (eds.). s.l.: American Institute of Physics, p. 617-620 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  127. Chapter 6: Arc welding and hybrid laser-arc welding

    Richardson, IM., 2008, The theory of laser materials processing, heat and mass transfer in modern technology. Dowden, J. (ed.). UK: Springer, p. 167-215 49 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  128. Effect of zinc coating thickness in gap-free laser welding of galvanised sheet steels

    Pan, Y. & Richardson, IM., 2008, Proceedings 3rd PICALO 2008, Beijing, China, 16-18 April, 2008. s.n. (ed.). s.l.: PICALO, p. 185-190 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  129. Experimental characterization of GTA weld pool surface flow using PIV

    Zhao, C., van Steijn, V., Richardson, IM., Saldi, ZS. & Kleijn, CR., 2008, Proceedings of the 8th International Conference on Trends in Welding Research, Pine Mountain, Georgia, USA, 1-6 June, 2008. David, S. A., DebRoy, T., DuPont, J. N., Koseki, T. & Smartt, H. B. (eds.). Ohio, USA: ASM International, p. 201-210 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  130. Het laserlassen van TRIP-staal. Experiment voor optimale microstructuur

    Murugaiyan, A., Hermans, MJM. & Richardson, IM., 2008, In : Lastechniek. 74, 7/8, p. 14-17 4 p.

    Research output: Contribution to journalArticleProfessional

  131. Microstructural development during welding of silicon and aluminium based transformation induced plasticity (TRIP) steels - Inclusion and elemental partitioning analysis

    Murugaiyan, A., Hermans, MJM. & Richardson, IM., 2008, IIW Doc. IX-2291-08 en IX-L-1029-08. Proceedings of the 61st Annual Assembly and International Conference of the IIW (International Institute of Welding), Graz, Austria, 6-11 July, 2008. IIW / IWS TU Graz (ed.). Graz, Austria: IIW / IWS TU Graz, p. 1-26 26 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  132. Observations on droplet and arc behaviour during pulsed GMAW

    Yudodibroto, BY., Hermans, MJM., den Ouden, G. & Richardson, IM., 2008, IIW Doc. 212-1125-08. Proceedings of the 61st Annual Assembly and International Conference of the IIW (International Institute of Welding), Graz, Austria, 6-11 July, 2008. IIW / IWS TU Graz (ed.). Graz, Austria: IIW / IWS TU Graz, p. 1-20 20 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  133. Onderzoek nieuws uit Delft. Observaties van druppel- en booggedrag. Pulserend MAG-lassen

    Yudodibroto, BY., Hermans, MJM., den Ouden, G. & Richardson, IM., 2008, In : Lastechniek. 74, 9, p. 14-19 6 p.

    Research output: Contribution to journalArticleProfessional

  134. Onderzoek nieuws uit Delft. Vloeistofstroming aan het lasbadoppervlak

    Zhao, C., Richardson, IM. & Hermans, MJM., 2008, In : Lastechniek. 74, 6, p. 10-12 3 p.

    Research output: Contribution to journalArticleProfessional

  135. Onderzoek nieuws uit Delft. Voorspellen en voorkomen van restspanningen

    van der Aa, EM., Hermans, MJM. & Richardson, IM., 2008, In : Lastechniek. 74, 4, p. 12-17 6 p.

    Research output: Contribution to journalArticleProfessional

  136. Process stability analysis during tandem wire arc welding

    Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2008, In : Revista Soldagem & Inspecao. 13, 1, p. 82-90 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  137. Resistance (mash) seam welding: influence of welding conditions on tin distribution

    Blom, AH., Richardson, IM., Elzinga, E. & de Haas, M., 2008, In : Science and Technology of Welding and Joining . 13, 1, p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  138. Simplified models for the investigation of longitudinal welding stress and strain development

    van der Aa, EM., Hermans, MJM. & Richardson, IM., 2008, Proceedings of the IWOTE'08: International Workshop on Thermal Forming and Welding Distortion, Bremen, Germany, April 22-23, 2008. Vollertsen, F. & Sakkiettibutra, J. (eds.). Bremen: Bias Verlag (Bremer Institut fur angewandte Strahltechnik), p. 171-180 10 p. (Strahltechnik; vol. 31).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  139. Study of laser lap joining of zinc coated sheet steel without a preset gap

    Pan, Y. & Richardson, IM., 2008, Proceedings 27th ICALEO, Temecula, USA, 20-23 October, 2008. s.n. (ed.). s.l.: ICALEO, p. 595-602 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  140. Verzinkt staal in overlapconfiguratie. Laserlassen met verschillende zinklaagdiktes

    Pan, Y. & Richardson, IM., 2008, In : Lastechniek. 74, 7/8, p. 18-21 4 p.

    Research output: Contribution to journalArticleProfessional

  141. Welding distortion of DP600 overlap joints and influence of clamping and phase transformation

    Schenk, T., Richardson, IM., Esser, G., Kraska, M. & Ohnimus, S., 2008, Proceedings of the IWOTE'08: International Workshop on Thermal Forming and Welding Distortion, Bremen, Germany, April 22-23, 2008. Vollertsen, F. & Sakkiettibutra, J. (eds.). Bremen: Bias Verlag (Bremer Institut fur angewandte Strahltechnik), p. 83-95 13 p. (Strahltechnik; vol. 31).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  142. Zinc transport phenomena in laser welding of coated sheet steel in overlap configuration. IIW-1896-08

    Pieters, RRGM., Goos, C., Rietman, BM. & Richardson, IM., 2008, In : Welding in the World. 52, 7/8, p. 33-41 9 p.

    Research output: Contribution to journalArticleProfessional

  143. 2007
  144. A new road to understanding resistance upset butt welding

    Kerstens, NFH. & Richardson, IM., 2007, Proceedings and Invited Speaker 3rd Join Conference On total welding management in industrial applications, Lappeenranta, Finland, 22-24 August 2007. s.n. (ed.). s.l.: s.n., p. 201-213 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  145. Control of welding residual stress and distortion by the addition of a trailing heat sink

    van der Aa, EM., Hermans, MJM. & Richardson, IM., 2007, Mathematical Modelling of Weld Phenomena 8. Cerjak, H., Bhadesia, H. K. D. H. & Kozeschnik, E. (eds.). Graz, Austria: Verlag der Technischen Universitat Graz, p. 1053-1072 20 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  146. Influence of a trailing heat sink on the microstructure and stress distribution in DP600 welds

    van der Aa, EM., Thiessen, RG., Murugaiyan, A., Hermans, MJM., Sietsma, J. & Richardson, IM., 2007, Mathematical Modelling of Weld Phenomena 8. Cerjak, H., Bhadeshia, H. K. D. H. & Kozeschnik, E. (eds.). Graz, Austria: Verlag der Technischen Universitat Graz, p. 387-408 22 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  147. Investigation on the influence of welding processes on the microstructure and mechanical properties of DP 600 and DP 1000 steels. Paper 4-06

    Wibowo, MK. & Richardson, IM., 2007, Proceedings 5th Asian Pacific IIW International Congress, Sydney, Australia, 7-9 March 2007. s.n. (ed.). s.l.: IIW, p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  148. Laser beam welding of an Oxide Dispersion Strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  149. Laser beam welding of an oxide dispersion strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 5286-5295 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  150. Modelling of laser welded joints and microstructure. A review and outlook

    Thiessen, RG. & Richardson, IM., 2007, Mathematical Modelling of Weld Phenomena 7. Cerjak, H., Bhadeshia, H. K. D. H. & Kozeschnik, E. (eds.). Graz, Austria: Graz University of Technology, p. 151-178 28 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  151. Onderzoek nieuws uit Delft. De invloed van opspannen modelleren

    Schenk, T., Kraska, M. & Richardson, IM., 2007, In : Lastechniek. 73, 10, p. 42-45 4 p.

    Research output: Contribution to journalArticleProfessional

  152. Phase-field modelling and synchroton validation of phase transformations in martensitic dual-phase steel

    Thiessen, RG., Sietsma, J., Palmer, TA., Elmer, JW. & Richardson, IM., 2007, In : Acta Materialia. 55, p. 601-614 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  153. Physically-based modelling of microstructure evolution in the HAZ of welded dual-phase steel

    Thiessen, RG., Sietsma, J. & Richardson, IM., 2007, Mathematical Modelling of Weld Phenomena 8. Cerjak, H., Bhadesia, H. K. D. H. & Kozeschnik, E. (eds.). Graz, Austria: Verlag der Technischen Universitat Graz, p. 195-216 22 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  154. Residual stress prediction and mitigation of welding distortion

    van der Aa, EM., Hermans, MJM. & Richardson, IM., 2007, iASTK'07, 10th International Aachen Welding Conference Welding and Joining, Key Technologies for the Future, Aachen, Germany, 24-25 October 2007. Reisgen, U., Willms, K. & Wagner, N. (eds.). Aachen, Germany: Shaker Verlag GmbH, p. 87-97 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  155. Study of laser welding of zinc coated steel sheets in overlap configuration

    Pan, Y. & Richardson, IM., 2007, Proceedings 11th NOLAMP, Lappeenranta, Finland, 19-22 August 2007. s.n. (ed.). s.l.: s.n., p. 332-339 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  156. The influence of laser beam welding and plasma arc welding processes on dual phase steel microstructure

    Wibowo, MK. & Richardson, IM., 2007, Thermec 2006, 5th International Conference on Processing and Manufacturing of Advanced Materials, Vancouver, Canada, 4-8 July, 2006. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Stafa-Zuerich, Switzerland: Trans Tech Publications, p. 1020-1025 6 p. (Advanced Materials Research; vol. 15-17).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  157. 2006
  158. A dual-mesh strategy for microstructure development in a macroscopic heat affected zone: Studies on AISI1316L and AISI1005

    Thiessen, RG., Richardson, IM. & Sietsma, J., 2006, Proceedings Trends in Welding Research, Proceedings of the 7th Int. Conference, Pine Mountain, Georgia, USA. David, S. A., DebRoy, T., Lippold, J. C., Smartt, H. B. & Vitek, J. M. (eds.). SL: ASM International, p. 993-1000 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  159. A phase transformation model for the austenitisation of martensite in dual-phase steel

    Thiessen, RG., Sietsma, J. & Richardson, IM., 2006, Thermec 2006, 5th International Conference on Processing and Manufacturing of Advanced Materials, Vancouver, Canada. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Stafa-Zuerich, Switzerland: Trans Tech Publications, p. 4608-4613 6 p. (Materials Science Forum; vol. 539-543).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  160. A physically based model for microstructure development in a macroscopic heat-affected zone: Grain growth and recrystallization

    Thiessen, RG. & Richardson, IM., 2006, In : Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science. 37B, p. 655-663 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  161. A strategy for modeling microstructure in macroscopic simulations of welded material

    Thiessen, RG. & Richardson, IM., 2006, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 37B, p. 293-299 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  162. Acoustic emission as a probe of the kinetics of the martensitic transformation in a shape memory alloy

    van Bohemen, SMC., Sietsma, J., Petrov, RH., Hermans, MJM. & Richardson, IM., 2006, In : Materials Transactions. 47, 3, p. 607-611 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  163. Conceptual model for stress and strain development during welding with trailing heat sink

    van der Aa, EM., Hermans, MJM. & Richardson, IM., 2006, In : Science and Technology of Welding and Joining . 11, 4, p. 488-495 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  164. Experimental study of the influence of a trailing heat sink on the welding residual stress distribution

    van der Aa, EM., Hermans, MJM., Richardson, IM., van der Pers, NM. & Delhez, R., 2006, Proceedings ECRS7, 7th European Conference on Residual Stresses, Berlin, Germany. Reimers, W. & Quander, S. (eds.). Uetikon-Zuerich, Switzerland: Trans Tech Publications, p. 479-484 6 p. (Materials Science Forum; vol. 524-525).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  165. Hybrid laser/GMA welding aluminium alloy 7075

    Hu, B. & Richardson, IM., 2006, In : Welding in the World. 50, 7-8, p. 51-57 7 p.

    Research output: Contribution to journalArticleProfessional

  166. Influence of a trailing heat sink on the welding residual stress distribution

    van der Aa, EM., Murugaiyan, A., Delhez, R., Hermans, MJM., Richardson, IM. & van der Pers, NM., 2006, onbekend: 3ME-MSE-JMB Joining and Mechanical Behaviour. 3 p.

    Research output: Book/ReportReportProfessional

  167. Mechanism and possible solution for transverse solidification cracking in laser welding of high strength aluminium alloys

    Hu, B. & Richardson, IM., 2006, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 429, 1-2, p. 287-294 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  168. Metaal-polymeer-laminaten. Gepulseerd laserlassen met verschillende pulsvormen.

    Gower, HL., Pieters, RRGM. & Richardson, IM., 2006, In : Lastechniek. 72, 1, p. 10-13 4 p.

    Research output: Contribution to journalArticleProfessional

  169. Modeling of molten drop oscillation in gas shielded metal arc welding

    Hirata, Y., Tsujimura, K., Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2006, Thermec 2006, 5th International Conference on Processing & Manufacturing of Advanced Materials, Vancouver, Canada. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Stafa-Zuerich: Trans Tech Publications, p. 3973-3978 6 p. (Materials Science Forum; vol. 539-543).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  170. Modelling of pendant drop oscillation.

    Hirata, Y., Tsujimura, K., Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2006, IIW Doc. 212-1077-05. Proceedings of the 58th Annual Assembly of the International Institute of Welding (IIW), Studygroup 212 "Physics of Welding", Prague, Czech Republic.. s.n. (ed.). s.l.: IIW, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  171. Pendant droplet oscillation during GMAW

    Yudodibroto, BY., Hermans, MJM., Hirata, Y., den Ouden, G. & Richardson, IM., 2006, In : Science and Technology of Welding and Joining . 11, 3, p. 308-314 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  172. Physically based modelling of phase transformations during welding of low-carbon steel

    Thiessen, RG., Richardson, IM. & Sietsma, J., 2006, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 427, p. 223-231 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  173. Poster: Control of welding stress and buckling distortion by means of a trailing heat sink

    van der Aa, EM., Hermans, MJM. & Richardson, IM., 2006.

    Research output: Contribution to conferencePosterProfessional

  174. Poster: Influence of a trailing heat sink on the microstructure and stress distribution in DP600 welds

    van der Aa, EM., Thiessen, RG., Murugaiyan, A., Hermans, MJM., Sietsma, J. & Richardson, IM., 2006.

    Research output: Contribution to conferencePosterProfessional

  175. Process stability analysis during tandem wire arc welding

    Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2006, IIW Doc. No. XII-1876-06. Proceedings of the 58th Annual Assembly of the International Institute of Welding (IIW), Quebec, Canada. SN (ed.). Quebec: IIW, p. 1-13 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  176. Pulsed laser welding of metal-polymer sandwich materials using pulse shaping

    Gower, HL., Pieters, RRGM. & Richardson, IM., 2006, In : Journal of Laser Applications. 18, 1, p. 35-41 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  177. Pulsed laser welding of steelite, a steel polypropylene laminate

    Gower, HL., Richardson, IM. & Pieters, RRGM., 2006, In : Science and Technology of Welding and Joining . 11, 5, p. 593-599 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  178. Renewed interest in resistance upset butt welding

    Kerstens, NFH. & Richardson, IM., 2006, Proceedings South-East Asia IIW, Bangkok, Thailand. SN (ed.). Bangkok: Welding Institute of Thailand, p. 262-272 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  179. Synchroton X-ray diffraction residuals stress measurement on conventionally and LSND welded 316L stainless steel samples

    van der Aa, EM., Hermans, MJM., Richardson, IM., van der Pers, NM. & Delhez, R., 2006, onbekend: 3ME-MSE-JMB Joining and Mechanical Behaviour. 60 p.

    Research output: Book/ReportReportProfessional

  180. The influence of pulse synchronisation on the process stability during tandem wire arc welding

    Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2006, IIW Doc. No. XII-1910-06. Proceedings of the 58th Annual Assembly of the International Institute of Welding (IIW), Quebec, Canada. SN (ed.). Quebec: IIW, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  181. The mechanism and significance of drop spray transfer in GMAW

    Richardson, IM., Norrish, J. & Hermans, MJM., 2006, IIW Doc. No. XII-1893-06. Proceedings of the 58th Annual Assembly of the International Institute of Welding (IIW), Quebec, Canada. SN (ed.). Quebec: IIW, p. 325-334 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  182. The oscillation behaviour of liquid metal in arc welding. Invited paper

    Hermans, MJM., Yudodibroto, BY., Hirata, Y., den Ouden, G. & Richardson, IM., 2006, Thermec 2006, 5th International Conference on Processing and Manufacturing of Advanced Materials, Vancouver, Canada. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Stafa-Zuerich, Switzerland: Trans Tech Publications, p. 3877-3882 6 p. (Materials Science Forum; vol. 539-543).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  183. The use of overlapping ND: YAG laser spot welds to butt weld steelite, a metal polymer laminate

    Gower, HL., Pieters, RRGM. & Richardson, IM., 2006, Paper #519 (Poster #519). Proceedings Conference ICALEO 2006, Scottsdale, Arizona, USA. SN (ed.). SL: ICALEO, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  184. Welding with a trailing heat sink: How to optimise the cooling parameters

    van der Aa, EM., Richardson, IM. & Hermans, MJM., 2006, Proceedings Trends in Welding Research, Proceedings of the 7th Int. Conference, Pine Mountain, Georgia, USA. David, S. A., DebRoy, T., Lippold, J. C., Smartt, H. B. & Vitek, J. M. (eds.). SL: ASM International, p. 577-582 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  185. Zinc transport phenomena in laser welding of coated sheet steel in overlap configuration. IIW Doc. 6.18 IV-917-06

    Pieters, RRGM., Goos, C., Rietman, BM. & Richardson, IM., 2006, Proceedings of the 58th Annual Assembly of the International Institute of Welding (IIW), Commission IV (Power Beam Processes) Meeting, Quebec Canada, 28-30 August, 2006. s.n. (ed.). Quebec, Canada: IIW, p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  186. 2005
  187. A flexible waveform representation for gas metal arc welding.

    Richardson, IM., 2005, IIW Doc. XII-1869-05. Proceedings of the 58th Annual Assembly of the International Institute of Welding (IIW), Prague, Czech Republic.. s.n. (ed.). s.l.: IIW, p. 112-124 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  188. Analysis of acoustic emission signals originating from bainite and martensite formation.

    van Bohemen, SMC., Sietsma, J., Hermans, MJM. & Richardson, IM., 2005, In : Philosophical Magazine (London, 2003). 85, 16, p. 1791-1804 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  189. Autogenous laser keyhole welding of aluminium alloy 2024.

    Hu, B. & Richardson, IM., 2005, In : Journal of Laser Applications. 17, 2, p. 70-80 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  190. Laser welding of zinc coated steel in overlap configuration with zero gap.

    Pieters, RRGM. & Richardson, IM., 2005, In : Science and Technology of Welding and Joining . 10, 2, p. 142-144 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  191. Mechanism and possible solution for transverse solidification cracking in laser welding of high strength aluminium alloys.

    Hu, B. & Richardson, IM., 2005, IIW Doc. IV-890-05. Proceedings of the 58th Annual Assembly of the International Institute of Welding (IIW), Prague, Czech Republic.. s.n. (ed.). s.l.: IIW, p. 1-20 20 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  192. Procedure for thermal cycle measurement.

    Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2005, Delft: SYNFAB, NIMR, TUDelft. 6 p.

    Research output: Book/ReportReportProfessional

  193. Process stability analysis during tandem wire arc welding.

    Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2005, IIW Doc. XII-1876-05. Proceedings of the 58th Annual Assembly of the International Institute of Welding (IIW), Prague, Czech Republic.. s.n. (ed.). s.l.: IIW, p. 1-13 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  194. Production of lap joint specimens.

    Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2005, Delft: SYNFAB, NIMR, TUDelft. 16 p.

    Research output: Book/ReportReportProfessional

  195. Production of weld specimens.

    Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2005, Delft: SYNFAB, NIMR, TUDelft. 11 p.

    Research output: Book/ReportReportProfessional

  196. Solidification rate in laser welding and its influence of AA2024 weld quality.

    Hu, B. & Richardson, IM., 2005, Proceedings ICALEO'05 (International Conference on laser materials processing), paper 2209, Miami, USA.. s.n. (ed.). USA: Laser Institute of America, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  197. TRIP-staal. Ontwikkeling microstructuur bij het lassen.

    Hermans, MJM., Wibowo, MK., Zhao, L., van Bohemen, SMC., Vegter, RH. & Richardson, IM., 2005, In : Lastechniek. 71, 9, p. 6-10 5 p.

    Research output: Contribution to journalArticleProfessional

  198. Thermal cycle measurement.

    Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2005, Delft: SYNFAB, NIMR, TUDelft. 5 p.

    Research output: Book/ReportReportProfessional

  199. 2004
  200. 3D Numerical model of weld pool oscillation in GTA welding.

    Hirata, Y., Kunishige, S., Hermans, MJM., Yudodibroto, BY., Ohji, T., den Ouden, G. & Richardson, IM., 2004, Welding Guide Book V. Sugitany, Y. (ed.). Tokyo, Japan: Japan Welding Society, p. II-33-II-41 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  201. Autogenous laser welding aluminium alloy 2024.

    Hu, B. & Richardson, IM., 2004, Proceedings 23rd International Congress on Applications of Lasers & Electro-Optics 2004 (ICALEO 2004). Laser Institute of America (ed.). San Francisco, USA: Laser Institute of America, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  202. Diverless underwater GMA welding for pipeline repair using a fillet welded sleeve.

    Woodward, NJ., Yapp, D., Blackman, SA., Richardson, IM., Widgery, D., Armstrong, MAP., Verley, RLP. & Berge, JO., 2004, Proceedings International Pipeline Conference. ASME International (ed.). New York, USA: ASME, p. 1-13 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  203. Diverless underwater GMA welding for pipeline repair using a fillet welded sleeve.

    Woodward, NJ., Yapp, D., Blackman, SA., Richardson, IM., Widgery, D., Armstrong, MAP., Verley, RLP. & Berge, JO., 2004, IIW-Doc. SCUW-207-04, International Conference of the International Institute of Welding (IIW), IIW Selected Committee for Underwater Welding (SCUW). IIW (ed.). Osaka, Japan: IIW, p. 1-11 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  204. Hybrid laser/GMA welding aluminium alloy 7075.

    Hu, B. & Richardson, IM., 2004, IIW Doc. IV-869-04, Proceedings 57th Annual Assembly of the International Institute of Welding (IIW), IIW Commission IV "Power Beam Processes". IIW (ed.). Osaka, Japan: IIW, p. 1-11 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  205. Laser welding of thin steel sheets: Energy transfer efficiency.

    Krasnoperov, MY., Pieters, RRGM. & Richardson, IM., 2004, Proceedings of the 1st Pacific International Conference on Application of Lasers and Optics 2004 (PICALO 2004). Brandt, M. & Harvey, E. (eds.). Melbourne, Australia: PICALO, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  206. Microstructure evaluation of gas tungsten arc and laser beam welded TRIP steel.

    Wibowo, MK., Zhao, L., Vegter, R. H., van Bohemen, SMC., Hermans, MJM. & Richardson, IM., 2004, Proceedings International Conference Advanced Metallic Materials and their Joining (Sectie: A1 (Novel steels in automotive industry and their welding). P. Bernasovsky, P. I. & P. Brziak, I. (eds.). Bratislava, Republic Slovakia: Int. Conf. Advanced Metallic Materials and their Joining, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  207. Microstructure evaluation of gas tungsten arc and laser beam welded TRIP steel.

    Wibowo, MK., Zhao, L., Vegter, R. H., van Bohemen, SMC., Hermans, MJM. & Richardson, IM., 2004.

    Research output: Contribution to conferencePosterProfessional

  208. Monitoring pendant droplet oscillation during pulsed current GMAW.

    Yudodibroto, BY., Hermans, MJM., Hirata, Y., Richardson, IM. & den Ouden, G., 2004, IIW Doc.212-1070-04, Proceedings 57th Annual Assembly of the International Institute of Welding (IIW), Study Group 212 "Physics of Welding". IIW (ed.). Osaka, Japan: IIW, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  209. Numerical simulation of welding - Physical modelling of recrystallisation & grain growth.

    Thiessen, RG. & Richardson, IM., 2004.

    Research output: Contribution to conferencePosterProfessional

  210. Pulsed laser welding of metal-polymer sandwich materials using pulse shaping.

    Gower, HL., Pieters, RRGM. & Richardson, IM., 2004, Proceedings 23rd International Congress on Applications of Lasers & Electro-Optics 2004 (ICALEO 2004). Laser Institute of America (ed.). San Francisco, USA: Laser Institute of America, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  211. SYNFAB project Synchronised tandem wire arc welding.

    Yudodibroto, BY., Hermans, MJM. & Richardson, IM., 2004.

    Research output: Contribution to conferencePosterProfessional

  212. Weld pool geometry during keyhole laser welding of thin steel sheets.

    Krasnoperov, MY., Pieters, RRGM. & Richardson, IM., 2004, In : Science and Technology of Welding and Joining . 9, 6, p. 501-506 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  213. 2003
  214. 3D Numerical model of weld pool oscillation in GTA welding.

    Hirata, Y., Kunishige, S., Hermans, MJM., Yudodibroto, BY., Ohji, T., den Ouden, G. & Richardson, IM., 2003, IIW Doc. 212-1042-03, Proc. of The 56th Annual Assembly of the International Institute of Welding, Bucharest, Romania, July 7-11, 2003.. IIW (ed.). Delft: Delft University of Technology, p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  215. A review of underwater welding processes. Part 1: The influence of pressure on the welding arc.

    Richardson, IM., 2003, IIW Doc. SCUW 202-03, Proc. of The 56th Annual Assembly of the International Institute of Welding, Bucharest, Romania, July 7-11, 2003.. IIW (ed.). Delft: Delft University of Technology, p. 1-11 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  216. Absorption of laser energy by a welding arc (Paper 1604).

    Hu, B. & Richardson, IM., 2003, Proc. 22nd Int. Congress on ICALEO 2003 (CD-ROM), Laser Institute of America, Florida, USA, October 13-16, 2003.. Laser Institute of America (ed.). Florida, USA: Laser Institute of America, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  217. Acoustic emission as a probe of the kinetics of the martensitic transformation in low-alloy steel.

    van Bohemen, SMC., Sietsma, J., Hermans, MJM. & Richardson, IM., 2003, Proc. of The Conference of Metallurgists, COM2003, Vancouver, Canada, August 24-27, 2003.. Militzer, W., Poole, WJ. & Essadiqi, E. (eds.). Vancouver, Canada: COM 2003, p. 125-139 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  218. Acoustic emission monitoring of bainite formation during continuous cooling.

    van Bohemen, SMC., Hermans, MJM., den Ouden, G. & Richardson, IM., 2003, In : The European Physical Journal. Special Topics. 112, p. 301-304 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  219. Deepwater hyperbaric welding Phase II. Final Technical Report.

    Richardson, IM., Hart, P., Nosal, P., Blair, R., Billingham, J. & Woodward, NJ., 2003, Delft: Delft University of Technology. 306 p.

    Research output: Book/ReportReportProfessional

  220. Downhole Welding Gamechanger - Initial Feasibility Study.

    Smith, L. & Richardson, IM., 2003, Delft: TUDelft i.o.v. Shell Septar. 69 p.

    Research output: Book/ReportReportProfessional

  221. Grain refinement due to grain detachment in electromagnetically stirred AA7020 welds.

    Mousavi, MG., Hermans, MJM., Richardson, IM. & den Ouden, G., 2003, In : Science and Technology of Welding and Joining . 8, 4, p. 309-312 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  222. High power diode laser welding of AA2024 and AISI316L (Paper 207).

    Kerstens, NFH., Richardson, IM. & Stoop, BTJ., 2003, Proc. 22nd Int. Congress on ICALEO 2003 (CD-ROM), Laser Institute of America, Florida, USA, October 13-16, 2003.. Laser Institute of America (ed.). Florida, USA: Laser Institute of America, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  223. Hyperbaric repair and hot-tapping of deepwater pipelines and risers (Paper 1).

    Blackman, SA., Richardson, IM. & Woodward, NJ., 2003, Proc. 2nd Int. Conf. on Recent Developments and Future Trends in Welding, Cranfield University, Cranfield, UK, 4-5 September 2003.. Cranfield University, UK (ed.). Cranfield, UK: Cranfield University, p. 1-15 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  224. Kinetics of the martensitic transformation in low-alloy steel studied by means of acoustic emission.

    van Bohemen, SMC., Sietsma, J., Hermans, MJM. & Richardson, IM., 2003, In : Acta Materialia. 51, p. 4183-4196 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  225. Laser welding of high strength steels (Paper 522).

    Pieters, RRGM., Krasnoperov, MY. & Richardson, IM., 2003, Proc. 22nd Int. Congress on ICALEO 2003 (CD-ROM), Laser Institute of America, Florida, USA,October 13-16, 2003.. Laser Institute of America (ed.). Florida, USA: Laser Institute of America, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  226. Laser welding of zinc coated steel in an overlap configuration.

    Pieters, RRGM., Thiessen, R. G. & Richardson, IM., 2003, IIW Doc. IV-838-03, Proc. of The 56th Annual Assembly of the International Institute of Welding, Bucharest, Romania, July 7-11, 2003.. IIW (ed.). Delft: Delft University of Technology, p. 1-13 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  227. Microstructure and Properties of welded TRIP steels.

    Wibowo, MK., van Bohemen, SMC., Zhao, L., Hermans, MJM. & Richardson, IM., 2003.

    Research output: Contribution to conferencePosterProfessional

  228. Microstructure and mechanical properties of welded TRIP steels.

    Wibowo, MK., van Bohemen, SMC., Zhao, L., Hermans, MJM. & Richardson, IM., 2003.

    Research output: Contribution to conferencePosterProfessional

  229. Modelling of laser welded joints and microstructure. A review & outlook.

    Thiessen, R. G. & Richardson, IM., 2003, Proc. 7th Int. Seminar Numerical Analysis of Weldability, Graz-Seggau, Austria, September 29-October 1, 2003.. Cerjak, H. & Bhadeshia, HKDH. (eds.). Graz-Seggau, Austria: Maney Publishing, p. 1-24 24 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  230. Oscillatory behaviour of the pendant droplet during pulsed current GMA welding.

    Yudodibroto, BY., Hermans, MJM., Hirata, Y., Richardson, IM. & den Ouden, G., 2003, IIW Doc. 212-1037-03, Proc. of The 56th Annual Assembly of the International Institute of Welding, Bucharest, Romania, July 7-11, 2003.. IIW (ed.). Delft: Delft University of Technology, p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  231. Solidification features of the thin steel sheets in keyhole welding (Paper P509).

    Krasnoperov, MY., Pieters, RRGM. & Richardson, IM., 2003, Proc. 22nd Int. Congress on ICALEO 2003 (CD-ROM), Laser Institute of America, Florida, USA, October 13-16, 2003.. Laser Institute of America (ed.). Florida, USA: Laser Institute of America, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  232. Solidification features of the thin steel sheets in keyhole welding.

    Krasnoperov, MY., Pieters, RRGM. & Richardson, IM., 2003.

    Research output: Contribution to conferencePosterProfessional

  233. Toekomst van lasprocessen.

    Richardson, IM., 2003, Jaarboek Verbindingstechnieken 2004. de Vreeze, A. & Buis, E. (eds.). Amsterdam: Media Business Press, p. 5-6 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

  234. Trends in welding and research and expertise - A Delft perspective.

    Richardson, IM., 2003, Proc. of the NIL Lassymposium 2003, Eindhoven, 24-25 november 2003.. NIL, Voorschoten (ed.). Voorschoten: NIL, p. 1-17 17 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  235. 2002
  236. A study of acoustic emission energy generated during bainite and martensite formation.

    van Bohemen, SMC., Hermans, MJM., den Ouden, G. & Richardson, IM., 2002, In : Journal of Physics D: Applied Physics. 35, p. 1889-1894 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  237. Deepwater Hyperbaric Welding Phase II - Final Technical Report.

    Richardson, IM., Hart, P., Nosal, P., Blair, R., Billingham, J. & Woodward, NJ., 2002, Delft: Delft University of Technology. 306 p.

    Research output: Book/ReportReportProfessional

  238. Deepwater welding for installation and repair. A viable technology .

    Richardson, IM., Woodward, NJ. & Billingham, J., 2002, Proc. ISOPE 2002, 12th Int. Offshore and Polar Engineering Conference, Kitakyushu, Japan, May 26-31, 2002.. ISOPE, p. 295-302 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  239. Diverless underwater GMA welding.

    Richardson, IM., Woodward, NJ. & Billingham, J., 2002, IIW-Doc. SCUW-197-02, Proc. 55th Annual Assembly of the International Institute of Welding (IIW), IIW Selected Committee for Underwater Welding (SCUW), Copenhagen, Denmark, 27 June 2002.. IIW, p. 1-19 19 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  240. Laser welding of automotive steels.

    Krasnoperov, MY., Pieters, RRGM. & Richardson, IM., 2002.

    Research output: Contribution to conferencePosterProfessional

  241. 2001
  242. A Langmuir multi-probe system for the characterization of atmospheric pressure arc plasmas.

    Fanara, C. & Richardson, IM., 2001, In : Journal of Physics D: Applied Physics. 34, p. 2715-2725 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  243. MIG Welding of 12mm 2024 and 12.7mm 7150 High Strength Aluminium Alloys used in the Aerospace Industry.

    Thomas, AW., Serrano, G. & Richardson, IM., 2001, Proceedings Conf. Recent Developments and Future Trends in Welding Technology.. p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  244. New Opportunities for Welding Aluminium Alloys?

    Richardson, IM. & Thomas, AW., 2001, Proc. Int. Conf. on Mind-Shifting Aluminium.. p. 119-136 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  245. The effects of pressure on electrical performance and weld bead geometry in high pressure GMA welding.

    Hart, P., Richardson, IM. & Nixon, JH., 2001, In : Welding in the World. 45, 11/12, p. 25-33 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

ID: 126164