1. Article › Scientific › Not peer-reviewed
  2. A physics-based transformation model for low-carbon steels: from first principles to on-line application

    van Leeuwen, Y., Luinenburg, A. W., Onink, M., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientific

  3. Flow stress prediction during intercritical deformation of a low-carbon steel with a rule of mixtures and Fe-simulations.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Scripta Metallurgica. 45, p. 875-882 8 p.

    Research output: Contribution to journalArticleScientific

  4. The gamma-alpha transformation kinetics of low carbon steels under ultra-fast cooling condition.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientific

  5. Article › Scientific › Peer-reviewed
  6. 3D Cellular automata modelling of solid-state transformations relevant in low-alloy steel production.

    Mecozzi, MG., Bos, C. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 1140-1145 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. 3DXRD characterization and modeling of solid-state transformation processes.

    Juul Jensen, D., Offerman, SE. & Sietsma, J., 2008, In : MRS Bulletin. 33, p. 621-629 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. 3DXRD microscopy for the study of solid-state phase transformation kinetics.

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. A cleaner process for selective recovery of valuable metals from electronic waste of complex mixtures of end-of-life electronic products

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2015, In : Environmental Science & Technology (Washington). 49, 13, p. 7981-7988 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. A coupled thermal-mechanical FE model of flow localization during the hot torsion test.

    Mirzakhani, B., Khoddam, S., Arabi, H., Salehi, MT. & Sietsma, J., 2009, In : Steel Research International. 80, p. 846-854 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. A microstructure model for recrystallisation and phase transformation during the dual-phase steel annealing cycle.

    Bos, C., Mecozzi, MG. & Sietsma, J., 2010, In : Computational Materials Science. 48, p. 692-699 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. A mixed-mode model for partitioning phase transformations.

    Bos, C. & Sietsma, J., 2007, In : Scripta Materialia. 57, p. 1085-1088 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. A mixed-mode model for the ferrite-to-austenite transformation in a ferrite/pearlite microstructure

    Mecozzi, MG., Bos, C. & Sietsma, J., 2015, In : Acta Materialia. 88, p. 302-313

    Research output: Contribution to journalArticleScientificpeer-review

  18. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. A novel 2D analysis method to study individual grains using high-energy X-ray microbeam diffraction

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2007, In : Advances in X-Ray Analysis. 51, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 9, p. 2789-2797 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 595-602 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. A physically based yield criterion I: Determination of the yield stress based on an alysis of pre-yield dislocation behaviour

    van Liempt, P., Bos, C. & Sietsma, J., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 662, p. 80-87

    Research output: Contribution to journalArticleScientificpeer-review

  23. A physically based yield criterion II: Incorporation of Hall Petch effect and resistance due to thermally activated dislocation glide

    van Liempt, P., Bos, C. & Sietsma, J., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 652, p. 7-13

    Research output: Contribution to journalArticleScientificpeer-review

  24. A quantitative investigation of the effect of Mn segregation on microstructural properties of quenching and partitioning steels

    Hajy Akbary, F., Sietsma, J., Petrov, R. H., Miyamoto, G., Furuhara, T. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 137, p. 27-30

    Research output: Contribution to journalArticleScientificpeer-review

  25. A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys.

    Wits, JJ., Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 283, p. 234-241 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. A three-dimensional model for the development of the microstructure in steel during slow cooling

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 2000, 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. A three-dimensional model for the development of the microstructure in steel during slow cooling.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Accurate representation of the distributions of the 3D Poisson-Voronoi typical cell geometrical features

    Vittorietti, M., Kok, P. J. J., Sietsma, J. & Jongbloed, G., 2019, In : Computational Materials Science. 166, p. 111-118 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Acoustic emission as a probe of the kinetics of the martensitic transformation in a shape memory alloy

    van Bohemen, SMC., Sietsma, J., Petrov, RH., Hermans, MJM. & Richardson, IM., 2006, In : Materials Transactions. 47, 3, p. 607-611 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Alpha'-martensite formation in deep-drawn Mn-based TWIP steel.

    van Tol, RT., Kim, JK., Zhao, L., Sietsma, J. & De Cooman, BC., 2012, In : Journal of Materials Science. 47, p. 4845-4850 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. An age-hardening model for Al-Mg-Si alloys considering needle-shaped precipitates.

    Bahrami, A., Miroux, AG. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 43, 11, p. 4445-4453 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. An environmentally friendly electro-oxidative approach to recover valuable elements from NdFeB magnet waste

    Venkatesan, P., Sun, Z. H. I., Sietsma, J. & Yang, Y., 2018, In : Separation and Purification Technology. 191, p. 384-391

    Research output: Contribution to journalArticleScientificpeer-review

  33. An improved X-ray diffraction analysis method to characterize dislocation density in lath martensitic structures

    Hajy Akbary, F., Sietsma, J., Bottger, AJ. & Santofimia, MJ., 2015, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 639, p. 208-218 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Analysis of acoustic emission signals originating from bainite and martensite formation.

    van Bohemen, SMC., Sietsma, J., Hermans, MJM. & Richardson, IM., 2005, In : Philosophical Magazine (London, 2003). 85, 16, p. 1791-1804 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling.

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 1431-1440 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel

    Hajy Akbary, F., Sietsma, J., Miyamoto, G., Kamikawa, N., Petrov, R., Furuhara, T. & Santofimia Navarro, M., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 677, p. 505–514

    Research output: Contribution to journalArticleScientificpeer-review

  37. Analysis of the y - a transformation in a C-Mn steel by phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2005, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 36A, (9), p. 2327-2340 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Analytical formulation for temperature evolution in flat wheel-rail sliding surfaces

    Alizadeh Otorabad, H., Tehrani, P. H., Younesian, D., Sietsma, J. & Petrov, R., 2018, In : Mathematical Problems in Engineering: theory, methods and applications. 2018, 7 p., 4239658.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Anisotropic dilatation behaviour during transformation of hot rolled steels showing banded structure.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Technology. 17, 12, p. 1569-1574 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Application of a three-dimensional microstructure evolution model to identify key processing settings for the production of dual-phase steels.

    Bos, C., Mecozzi, MG., Hanlon, DN., Aarnts, MP. & Sietsma, J., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42, p. 3602-3610 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Application of the level-set method to a mixed-mode driven Stefan problem in 2D and 3D

    den Ouden, D., Segal, A., Vermolen, FJ., Zhao, L., Vuik, C. & Sietsma, J., 2013, In : Computing. 95, 1, p. 553-572 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Application of the maximum driving force concept for solid-state partitioning phase transformations in multi-component systems.

    Bos, C. & Sietsma, J., 2009, In : Acta Materialia. 57, p. 136-144 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Atomic scale simulation of magnesium single crystals.

    Phelan, DJ., Stanford, N., Thijsse, BJ. & Sietsma, J., 2010, In : Materials Science Forum. 638-642, p. 1585-1590 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Atomic two-level states and relaxations observed in a computer model of amorphous Ni81N19.

    van Ee, LD., Thijsse, BJ. & Sietsma, J., 1998, In : Physica B: Condensed Matter. 57, 2, p. 906-913 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

    Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Characterization. 152, p. 67-75

    Research output: Contribution to journalArticleScientificpeer-review

  46. Austenite formation from martensite in a 13Cr6Ni2Mo supermartensitic stainless steel

    Bojack, A., Zhao, L., Morris, PF. & Sietsma, J., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 5, p. 1996-2009

    Research output: Contribution to journalArticleScientificpeer-review

  47. Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating

    Castro Cerda, F. M., Sabirov, I., Goulas, K., Sietsma, J., Monsalve, A. & Petrov, R. H., 2017, In : Materials & Design. 116, p. 448-460

    Research output: Contribution to journalArticleScientificpeer-review

  48. Austenite formation in C35 and C45 alloys.

    Savran, VI., van Leeuwen, Y., Hanlon, DN. & Sietsma, J., 2007, In : Materials Science Forum. 539-543, 5, p. 4637-4642 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Austenite nucleation and growth observed on the level of individual grains by three-dimensional X-ray diffraction microscopy.

    Savran, VI., Offerman, SE. & Sietsma, J., 2010, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 41A, p. 583-591 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Bainite formation in medium-carbon low-silicon spring steels accounting for chemical segregation

    Goulas, K., Mecozzi, MG. & Sietsma, J., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 6, p. 3077-3087

    Research output: Contribution to journalArticleScientificpeer-review

  51. Bainite formation kinetics in high carbon alloyed steel.

    Luzginova, NV., Zhao, L. & Sietsma, J., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 481, 2, p. 766-769 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Bainite formation kinetics in steels and the dynamic nature of the autocatalytic nucleation process

    Ravi, A. M., Sietsma, J. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 140, p. 82-86

    Research output: Contribution to journalArticleScientificpeer-review

  53. Barrier free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel

    van Dijk, NH., Offerman, SE., Sietsma, J. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 4489-4498 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Cementite dissolution at 860 degrees C in an Fe-Cr-C steel

    Zhao, L., Vermolen, FJ., Wauthier, A. & Sietsma, J., 2006, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 37A, p. 1841-1850 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Characterisation and quantification of microstructural banding in dual phase steels Part 1 - General 2D study

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2012, In : Materials Science and Technology. 28, 8, p. 895-902 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Characterisation and quantification of microstructural banding in dual-phase steels Part 2 - case study extending to 3D

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2012, In : Materials Science and Technology. 28, 8, p. 903-910 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Waste Management. 35, p. 227-235

    Research output: Contribution to journalArticleScientificpeer-review

  58. Characteristics of the static recrystallisation kinetics of an intercritically deformed C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 293-298 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Characterization of NbC and (Nb,Ti)N nanoprecipitates in TRIP assisted multi phase steels¿

    Tirumalasetty, GK., van Huis, MA., Fang, C., Xu, Q., Tichelaar, FD., Hanlon, DN., Sietsma, J. & Zandbergen, HW., 2011, In : Acta Materialia. 59, 19, p. 7406-7415 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Characterization of bainitic/martensitic structures formed in isothermal treatments below the Ms temperature

    Navarro-López, A., Hidalgo Garcia, J., Sietsma, J. & Santofimia Navarro, M. J., 2017, In : Materials Characterization. 128, p. 248-256

    Research output: Contribution to journalArticleScientificpeer-review

  61. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels.

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 6713-6723 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Characterization of the burden behaviour of iron ore pellets mixed with nut coke under simulated blast furnace conditions

    Gavel, D. J., Song, Q., Adema, A., van der Stel, J., Sietsma, J., Boom, R. & Yang, Y., 2018, In : Ironmaking & Steelmaking: processes, products and applications. 47 (2020), 2, p. 195-202

    Research output: Contribution to journalArticleScientificpeer-review

  63. Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steel.

    Santofimia Navarro, MJ., Zhao, L., Petrov, RH. & Sietsma, J., 2008, In : Materials Characterization. 58, p. 1758-1764 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation.

    Dmitrieva, O., Ponge, D., Inden, G., Millán, J., Choi, P., Sietsma, J. & Raabe, D., 2011, In : Acta Materialia. 59, p. 364-374 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Cluster formation of pearlite colonies during the austenite/pearlite phase transformation in eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, In : Physica B: Condensed Matter. 335, p. 99-103 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Complex electronic waste treatment: An effective process to selectively recover copper with solutions containing different ammonium salts

    Sun, Z., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2016, In : Waste Management. 57, p. 140–148

    Research output: Contribution to journalArticleScientificpeer-review

  67. Curly malachite on archaeological bronze: A systematic study of the shape and phenomenological approach of its formation mechanism

    Nienhuis, J., Robbiola, L., Giuliani, R., Joosten, I., Huisman, H., van Os, B. & Sietsma, J., 2016, In : e-Preservation Science . 13, p. 23-32

    Research output: Contribution to journalArticleScientificpeer-review

  68. Deformation induced austenite grain rotation and transformation in TRIP assisted steel

    Tirumalasetty, GK., van Huis, MA., Kwakernaak, C., Sietsma, J., Sloof, WG. & Zandbergen, HW., 2012, In : Acta Materialia. 60, p. 1311-1321 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications

    Kumar, A., Makineni, S. K., Dutta, A., Goulas, C., Steenbergen, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 759, p. 210-223

    Research output: Contribution to journalArticleScientificpeer-review

  70. Development of a New Downscale Setup for Wheel-Rail Contact Experiments under Impact Loading Conditions

    Naeimi, M., Li, Z., Petrov, R., Sietsma, J. & Dollevoet, R., 2017, In : Experimental Techniques: a publication for the practicing engineer. 42 (2018), 1, p. 1-17

    Research output: Contribution to journalArticleScientificpeer-review

  71. Diffusion-limited dissolution of spherical particles: A critical evaluation and applications of approximate solutions

    Guo, X., Sietsma, J., Yang, Y., Sun, Z. & Guo, M., 2017, In : AIChE Journal. 63, 7, p. 2926-2934

    Research output: Contribution to journalArticleScientificpeer-review

  72. Dilatometric analysis of phase transformations in hypo-eutectoid steels.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 36, p. 519-526 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Dislocation annihiliation in plastic deformation: II. Kocks-Mecking analysis.

    Galindo Nava, EI., Sietsma, J. & Rivera Diaz del Castillo, PEJ., 2012, In : Acta Materialia. 60, p. 2615-2624 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Domain size determination of granular ferromagnetic systems with neutron depolarization

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. vol 89, no, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Domain size determination of granular ferromagnetic systems with neutron depolarization.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. 89, 2, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Effect of C on the martensitic transformation in Fe-C alloys in the presence of pre-existing defects: A molecular dynamics study

    Karewar, S., Sietsma, J. & Santofimia Navarro, M., 2019, In : Crystals. 9, 2, 13 p., 99.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Effect of Intercritical deformation on bainite formation in Al-containing TRIP steel

    Luo, H., Zhao, L., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, 8, p. 1219-1227 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Effect of Strain Rate on the Subsequent Softening and Precipitation Kinetics in a Nb-Microalloyed Steel

    Luo, H., Qin, Y., Sietsma, J. & van der Zwaag, S., 2005, In : Steel Research International. 09, 76, p. 650-655 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Effect of W and N on mechanical properties of reduced activation ferritic/martensitic EUROFER-based steel grades

    Puype, A., Malerba, L., De Wispelaere, N., Petrov, R. & Sietsma, J., 2018, In : Journal of Nuclear Materials. 502, p. 282-288

    Research output: Contribution to journalArticleScientificpeer-review

  80. Effect of composition on kinetics of athermal martensite formation in plain carbon steels.

    van Bohemen, SMC. & Sietsma, J., 2009, In : Materials Science and Technology. 25, p. 1009-1012 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Effect of inhomogeneous deformation on the recrystallization kinetics of deformed metals

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 11, p. 1931-1936 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Effect of niobium and grain boundary density on the fire resistance of Fe-C-Mn steel.

    Dere, EG., Sharma, H., Petrov, RH., Sietsma, J. & Offerman, SE., 2013, In : Scripta Materialia. 68, p. 651-654 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Effect of nut coke addition on physicochemical behaviour of pellet bed in ironmaking blast furnace

    Gavel, D. J., Adema, A., Stel, J. V. D., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 59, 5, p. 778-786

    Research output: Contribution to journalArticleScientificpeer-review

  84. Effect of pre-existing defects in the parent fcc phase on atomistic mechanisms during the martensitic transformation in pure Fe: A molecular dynamics study

    Karewar, S., Sietsma, J. & Santofimia Navarro, M., 2018, In : Acta Materialia. 142, p. 71-81

    Research output: Contribution to journalArticleScientificpeer-review

  85. Effect of prior athermal martensite on the isothermal transformation kinetics below M s in a low-C high-Si steel

    Navarro Lopez, A., Sietsma, J. & Santofimia Navarro, MJ., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 3, p. 1028-1039

    Research output: Contribution to journalArticleScientificpeer-review

  86. Effect of processing on microstructural features and mechanical properties of a reduced activation ferritic/martensitic EUROFER steel grade

    Puype, A., Malerba, L., De Wispelaere, N., Petrov, R. & Sietsma, J., 2017, In : Journal of Nuclear Materials. 494, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  87. Effects of holding time on thermo-mechanical fatigue properties of compacted graphite iron through tests with notched specimens

    Ghodrat, S., Riemslag, AC., Kestens, LAI., Petrov, RH., Janssen, M. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 5, p. 2121-2130 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Effects of nitriding on fatigue strength of quenched and tempered steel: role of interstitial nitrogen.

    Korevaar, BM., Coorens, S., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 17, p. 54-62 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Elastic strain measurement of miniature tensile specimens

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, In : Experimental Mechanics. 54, 2, p. 165-173 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Electrochemical extraction of rare earth metals in molten fluorides: Conversion of rare earth oxides into rare earth fluorides using fluoride additives

    Abbasalizadeh, A., Malfliet, A., Seetharaman, S., Sietsma, J. & Yang, Y., 2017, In : Journal of Sustainable Metallurgy. 3, 3, p. 627–637

    Research output: Contribution to journalArticleScientificpeer-review

  91. Electrochemical recovery of rare earth elements from magnets: Conversion of rare earth based metals into rare earth fluorides in molten salts

    Abbasalizadeh, A., Malfliet, A., Seetharaman, S., Sietsma, J. & Yang, Y., 2017, In : Materials Transactions. 58, 3, p. 400-405

    Research output: Contribution to journalArticleScientificpeer-review

  92. Electrochemistry during efficient copper recovery from complex electronic waste using ammonia based solutions

    Sun, Z., Cao, H., Venkatesan, P., Jin, W., Xiao, Y., Sietsma, J. & Yang, Y., 2017, In : Frontiers of Chemical Science and Engineering. 11, 3, p. 308-316

    Research output: Contribution to journalArticleScientificpeer-review

  93. Evaluation of a semiphysical phase transformation model for engineering steels using measured continuous cooling transformation diagrams.

    van der Wolk, PJ., Sietsma, J. & Parker, SV., 2001, In : Materials Science and Technology. 17, p. 127-134 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Evolution and thermal stability of retained austenite in SAE 52100 bainitic steel.

    Luzginova, NV., Zhao, L. & Sietsma, J., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 448, 1-3, p. 104-110 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Evolution of the mixed-mode character of solid-state phase transformations in metals involving solute partitioning.

    Sietsma, J., Mecozzi, MG., van Bohemen, SMC. & van der Zwaag, S., 2006, In : Zeitschrift fuer Metallkunde. 97, 4, p. 356-361 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Experimental evidence for bainite formation below Ms in Fe-0.6C.

    van Bohemen, SMC., Santofimia Navarro, MJ. & Sietsma, J., 2008, In : Scripta Materialia. 58, 6, p. 488-491 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Experimental investigation and thermodynamic modelling of LiF-NdF3-DyF3 system

    Abbasalizadeh, A., Sridar, S., Chen, Z., Sluiter, M., Yang, Y., Sietsma, J., Seetharaman, S. & Hari Kumar, K. C., 2018, In : Journal of Alloys and Compounds. 753, p. 388-394

    Research output: Contribution to journalArticleScientificpeer-review

  98. Experimental investigation of structural defects in deep-drawn austenitic Mn-based TWIP steel.

    van Tol, RT., Zhao, L., Schut, H. & Sietsma, J., 2012, In : Materials Science and Technology. 28, 3, p. 348-352 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Experimental observations elucidating the mechanisms of structural bcc-hcp transformations in beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2006, In : Physical Review B (Condensed Matter and Materials Physics). 74, 13, p. 134114-1-13114-10

    Research output: Contribution to journalArticleScientificpeer-review

  100. Experimental observations on the correlation between microstructure and fracture of multiphase steels

    Papaefthymiou, S., Prahl, U., Bleck, W., van der Zwaag, S. & Sietsma, J., 2007, In : International Journal of Materials Research. 97, 12, p. 1723-1731 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Experimental studies into strip casting of steel.

    Phelan, DJ., Zuidwijk, T., Strezov, L., Sietsma, J. & Dippenaar, R., 2007, In : Materials Science Forum. 539-543, p. 4155-4160 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Experimental study of the distribution of alloying elements after the formation of epitaxial ferrite upon cooling in a low-carbon steel

    Santofimia Navarro, MJ., Kwakernaak, C., Sloof, WG., Zhao, L. & Sietsma, J., 2010, In : Materials Characterization. 61, p. 937-942 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 Next

ID: 138382