1. 2020
  2. General framework for testing Poisson-Voronoi assumption for real microstructures

    Vittorietti, M., Kok, P. J. J., Sietsma, J., Li, W. & Jongbloed, G., 11 Feb 2020, In : Applied Stochastic Models in Business and Industry. 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Impact of austenite grain boundaries and ferrite nucleation on bainite formation in steels

    Ravi, A. M., Kumar, A., Herbig, M., Sietsma, J. & Santofimia, M. J., 2020, In : Acta Materialia. 188, p. 424-434

    Research output: Contribution to journalArticleScientificpeer-review

  4. Influence of martensite/austenite interfaces on bainite formation in low-alloy steels below Ms

    Ravi, A. M., Navarro-López, A., Sietsma, J. & Santofimia, M. J., 2020, In : Acta Materialia. 188, p. 394-405

    Research output: Contribution to journalArticleScientificpeer-review

  5. The combined influence of grain size distribution and dislocation density on hardness of interstitial free steel

    Li, W., Vittorietti, M., Jongbloed, G. & Sietsma, J., 2020, In : Journal of Materials Science and Technology. 45, p. 35-43

    Research output: Contribution to journalArticleScientificpeer-review

  6. Thermal decomposition reaction kinetics of hematite ore

    Chen, Z., Zeilstra, C., van der Stel, J., Sietsma, J. & Yang, Y., 2020, In : ISIJ International. 60, 1, p. 65-72

    Research output: Contribution to journalArticleScientificpeer-review

  7. Unravelling the mechanical behaviour of advanced multiphase steels isothermally obtained below Ms

    Navarro-López, A., Hidalgo, J., Sietsma, J. & Santofimia, M. J., 2020, In : Materials and Design. 188, 12 p., 108484.

    Research output: Contribution to journalArticleScientificpeer-review

  8. 2019
  9. Effect of graphite on hot metal desulphurisation

    Schrama, F., Beunder, E. M., Visser, H-J., Boom, R., Sietsma, J. & Yang, Y., 25 Jun 2019, Proceedings of METEC & 4th ESTAD. Düsseldorf: VDeH Verlag Stahleisen, 5 p. P308

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Accurate representation of the distributions of the 3D Poisson-Voronoi typical cell geometrical features

    Vittorietti, M., Kok, P. J. J., Sietsma, J. & Jongbloed, G., 2019, In : Computational Materials Science. 166, p. 111-118 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

    Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Characterization. 152, p. 67-75

    Research output: Contribution to journalArticleScientificpeer-review

  12. Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications

    Kumar, A., Makineni, S. K., Dutta, A., Goulas, C., Steenbergen, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 759, p. 210-223

    Research output: Contribution to journalArticleScientificpeer-review

  13. Effect of C on the martensitic transformation in Fe-C alloys in the presence of pre-existing defects: A molecular dynamics study

    Karewar, S., Sietsma, J. & Santofimia Navarro, M., 2019, In : Crystals. 9, 2, 13 p., 99.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Effect of nut coke addition on physicochemical behaviour of pellet bed in ironmaking blast furnace

    Gavel, D. J., Adema, A., Stel, J. V. D., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 59, 5, p. 778-786

    Research output: Contribution to journalArticleScientificpeer-review

  15. In situ study on fracture behaviour of white etching layers formed on rails

    Kumar, A., Saxena, A. K., Kirchlechner, C., Herbig, M., Brinkmann, S., Petrov, R. H. & Sietsma, J., 2019, In : Acta Materialia. 180, p. 60-72

    Research output: Contribution to journalArticleScientificpeer-review

  16. In-situ observation of strain partitioning and damage development in continuously cooled carbide-free bainitic steels using micro digital image correlation

    Kumar, A., Dutta, A., Makineni, S. K., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 757, p. 107-116

    Research output: Contribution to journalArticleScientificpeer-review

  17. Influence of microstructure on mechanical properties of bainitic steels in railway applications

    Hajizad, O., Kumar, A., Li, Z., Petrov, R. H., Sietsma, J. & Dollevoet, R., 2019, In : Metals. 9, 7, 19 p., 778.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Interaction of precipitation with austenite-to-ferrite phase transformation in vanadium micro-alloyed steels

    Ioannidou, C., Arechabaleta Guenechea, Z., Navarro Lopez, A., Rijkenberg, A., Dalgliesh, R. M., Kölling, S., Bliznuk, V., Pappas, C., Sietsma, J., van Well, A. & Offerman, E., 2019, In : Acta Materialia. 181, p. 10-24

    Research output: Contribution to journalArticleScientificpeer-review

  19. Melting Behaviour of Iron Ore Pellet Bed under Nut Coke Mixed Charge Conditions

    Gavel, D. J., Adema, A., van der Stel, J., Kwakernaak, K., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 60, 3, 12 p., ISIJINT-2019-246.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Microstructural evolution of white and brown etching layers in pearlitic rail steels

    Kumar, A., Agarwal, G., Petrov, R., Goto, S., Sietsma, J. & Herbig, M., 2019, In : Acta Materialia. 171, p. 48-64

    Research output: Contribution to journalArticleScientificpeer-review

  21. Microstructure evolution during high-temperature partitioning of a medium-Mn quenching and partitioning steel

    Ayenampudi, S., Celada-Casero, C., Sietsma, J. & Santofimia, M. J., 2019, In : Materialia. 8, 11 p., 100492.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Modeling temperature evolution of wheel flat during formation

    Alizadeh Otorabad, H., Younesian, D., Hosseini Tehrani, P., Sietsma, J. & Petrov, R., 2019, In : International Journal of Thermal Sciences. 140, p. 114-126

    Research output: Contribution to journalArticleScientificpeer-review

  23. Prediction of density and volume variation of hematite ore particles during in-flight melting and reduction

    Chen, Z. Y., Qu, Y. X., Zeilstra, C., Van Der Stel, J., Sietsma, J. & Yang, Y. X., 2019, In : Journal of Iron and Steel Research International. 26, 12, p. 1285-1294

    Research output: Contribution to journalArticleScientificpeer-review

  24. The hampering effect of precipitated carbon on hot metal desulfurization with magnesium

    Schrama, F. N. H., Beunder, E. M., Visser, H. J., Sietsma, J., Boom, R. & Yang, Y., 2019, In : Steel Research International. 8 p., 1900441.

    Research output: Contribution to journalArticleScientificpeer-review

  25. The influence of the austenite grain size on the microstructural development during quenching and partitioning processing of a low-carbon steel

    Celada-Casero, C., Kwakernaak, C., Sietsma, J. & Santofimia, M. J., 2019, In : Materials and Design. 178, 12 p., 107847.

    Research output: Contribution to journalArticleScientificpeer-review

  26. The role of the austenite grain size in the martensitic transformation in low carbon steels

    Alonso de Celada Casero, C., Sietsma, J. & Santofimia Navarro, M., 2019, In : Materials and Design. 167, 10 p., 107625.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Theoretical aspects of spinodal decomposition in Fe-C

    Kim, B., Sietsma, J. & Santofimia, M. J., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 3, p. 1175-1184

    Research output: Contribution to journalArticleScientificpeer-review

  28. Use of iron reactive anode in electrowinning of neodymium from neodymium oxide

    Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2019, In : Electrochimica Acta. 310, p. 146-152

    Research output: Contribution to journalArticleScientificpeer-review

  29. 2018
  30. Ageing behaviour of neutron/irradiated Eurofer97

    Carvalho, I., Fedorov, A., Kolluri, M., Luzginova, N., Schut, H. & Sietsma, J., 2018, The Ageing of Materials and Structures: Towards Scientific Solutions for the Ageing of Our Assets. van Breugel, K., Koleva, D. & van Beek, T. (eds.). Cham, Switzerland: Springer, p. 111-118

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  31. An environmentally friendly electro-oxidative approach to recover valuable elements from NdFeB magnet waste

    Venkatesan, P., Sun, Z. H. I., Sietsma, J. & Yang, Y., 2018, In : Separation and Purification Technology. 191, p. 384-391

    Research output: Contribution to journalArticleScientificpeer-review

  32. Analytical formulation for temperature evolution in flat wheel-rail sliding surfaces

    Alizadeh Otorabad, H., Tehrani, P. H., Younesian, D., Sietsma, J. & Petrov, R., 2018, In : Mathematical Problems in Engineering: theory, methods and applications. 2018, 7 p., 4239658.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Characterization of the burden behaviour of iron ore pellets mixed with nut coke under simulated blast furnace conditions

    Gavel, D. J., Song, Q., Adema, A., van der Stel, J., Sietsma, J., Boom, R. & Yang, Y., 2018, In : Ironmaking & Steelmaking: processes, products and applications. 47 (2020), 2, p. 195-202

    Research output: Contribution to journalArticleScientificpeer-review

  34. Effect of KAlF4 on the efficiency of hot metal desulphurisation with magnesium

    Schrama, F., Beunder, E. M., Ji, F., Woolf, R., Barnes, C., Sietsma, J., Boom, R. & Yang, Y., 2018, 8th European Oxygen Steelmaking Conference (EOSC 2018). 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Effect of W and N on mechanical properties of reduced activation ferritic/martensitic EUROFER-based steel grades

    Puype, A., Malerba, L., De Wispelaere, N., Petrov, R. & Sietsma, J., 2018, In : Journal of Nuclear Materials. 502, p. 282-288

    Research output: Contribution to journalArticleScientificpeer-review

  36. Effect of pre-existing defects in the parent fcc phase on atomistic mechanisms during the martensitic transformation in pure Fe: A molecular dynamics study

    Karewar, S., Sietsma, J. & Santofimia Navarro, M., 2018, In : Acta Materialia. 142, p. 71-81

    Research output: Contribution to journalArticleScientificpeer-review

  37. Experimental investigation and thermodynamic modelling of LiF-NdF3-DyF3 system

    Abbasalizadeh, A., Sridar, S., Chen, Z., Sluiter, M., Yang, Y., Sietsma, J., Seetharaman, S. & Hari Kumar, K. C., 2018, In : Journal of Alloys and Compounds. 753, p. 388-394

    Research output: Contribution to journalArticleScientificpeer-review

  38. Hydrometallurgical recovery of rare earth elements from mine tailings and WEEE

    Peelman, S., Kooijman, D., Sietsma, J. & Yang, Y., 2018, In : Journal of Sustainable Metallurgy. 4, 3, p. 367-377

    Research output: Contribution to journalArticleScientificpeer-review

  39. Influence of bainite reaction on the kinetics of carbon redistribution during the Quenching and Partitioning process

    Nishikawa, A. S., Santofimia Navarro, M., Sietsma, J. & Goldenstein, H., 2018, In : Acta Materialia. 142, p. 142-151

    Research output: Contribution to journalArticleScientificpeer-review

  40. Influence of the prior athermal martensite on the mechanical response of advanced bainitic steel

    Navarro-López, A., Hidalgo Garcia, J., Sietsma, J. & Santofimia Navarro, M., 2018, In : Materials Science and Engineering A. 735, p. 343-353

    Research output: Contribution to journalArticleScientificpeer-review

  41. Martensite crystallography and chemistry in dual phase and fully martensitic steels

    Du, C., Hoefnagels, J. P. M., Kölling, S., Geers, M. G. D., Sietsma, J., Petrov, R., Bliznuk, V., Koenraad, P. M., Schryvers, D. & Amin-Ahmadi, B., 2018, In : Materials Characterization. 139, p. 411-420

    Research output: Contribution to journalArticleScientificpeer-review

  42. Micro and nanoscale characterization of complex multilayer-structured white etching layer in rails

    Wu, J., Petrov, R., Kölling, S., Godet, S. & Sietsma, J., 2018, In : Metals. 8, 10, 18 p., 749.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Quantitative study on dissolution behavior of Nd2O3 in fluoride melts

    Guo, X., Sun, Z., Sietsma, J., Blanpain, B., Guo, M. & Yang, Y., 2018, In : Industrial and Engineering Chemistry Research. 57, 5, p. 1380-1388

    Research output: Contribution to journalArticleScientificpeer-review

  44. Recovery of neodymium as (Na, Nd)(SO4)2 from the ferrous fraction of a general WEEE shredder stream

    Peelman, S., Sietsma, J. & Yang, Y., 2018, In : Journal of Sustainable Metallurgy. 4, 2, p. 276-287

    Research output: Contribution to journalArticleScientificpeer-review

  45. Selective electrochemical extraction of REEs from NdFeB magnet waste at room temperature

    Venkatesan, P., Vander Hoogerstraete, T., Hennebel, T., Binnemans, K., Sietsma, J. & Yang, Y., 2018, In : Green Chemistry. 20, 5, p. 1065-1073

    Research output: Contribution to journalArticleScientificpeer-review

  46. Selective extraction of rare-earth elements from NdFeB magnets by a room-temperature electrolysis pretreatment step

    Venkatesan, P., Vander Hoogerstraete, T., Binnemans, K., Sun, Z., Sietsma, J. & Yang, Y., 2018, In : ACS Sustainable Chemistry and Engineering. 6, 7, p. 9375-9382

    Research output: Contribution to journalArticleScientificpeer-review

  47. Slag optimisation considering iron loss and sulphide capacity in hot metal desulphurisation

    Schrama, F. N. H., Moosavi-Khoonsari, E., Beunder, E. M., Kooij, C., Boom, R., Sietsma, J. & Yang, Y., 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

    Chen, Z., Qu, Y., Zeilstra, C., van der Stel, J., Sietsma, J. & Yang, Y., 2018, In : Ironmaking and Steelmaking. 47 (2020), 2, p. 173-177

    Research output: Contribution to journalArticleScientificpeer-review

  49. Thermomechanical analysis of the wheel-rail contact using a coupled modelling procedure

    Naeimi, M., Li, S., Li, Z., Wu, J., Petrov, R. H., Sietsma, J. & Dollevoet, R., 2018, In : Tribology International. 117, p. 250-260

    Research output: Contribution to journalArticleScientificpeer-review

  50. Unravelling dislocation networks in metals

    Arechabaleta Guenechea, Z., van Liempt, P. & Sietsma, J., 2018, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 710, p. 329-333

    Research output: Contribution to journalArticleScientificpeer-review

  51. 2017
  52. A quantitative investigation of the effect of Mn segregation on microstructural properties of quenching and partitioning steels

    Hajy Akbary, F., Sietsma, J., Petrov, R. H., Miyamoto, G., Furuhara, T. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 137, p. 27-30

    Research output: Contribution to journalArticleScientificpeer-review

  53. Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating

    Castro Cerda, F. M., Sabirov, I., Goulas, K., Sietsma, J., Monsalve, A. & Petrov, R. H., 2017, In : Materials & Design. 116, p. 448-460

    Research output: Contribution to journalArticleScientificpeer-review

  54. Bainite formation kinetics in steels and the dynamic nature of the autocatalytic nucleation process

    Ravi, A. M., Sietsma, J. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 140, p. 82-86

    Research output: Contribution to journalArticleScientificpeer-review

  55. Characterization of bainitic/martensitic structures formed in isothermal treatments below the Ms temperature

    Navarro-López, A., Hidalgo Garcia, J., Sietsma, J. & Santofimia Navarro, M. J., 2017, In : Materials Characterization. 128, p. 248-256

    Research output: Contribution to journalArticleScientificpeer-review

  56. Development of a New Downscale Setup for Wheel-Rail Contact Experiments under Impact Loading Conditions

    Naeimi, M., Li, Z., Petrov, R., Sietsma, J. & Dollevoet, R., 2017, In : Experimental Techniques: a publication for the practicing engineer. 42 (2018), 1, p. 1-17

    Research output: Contribution to journalArticleScientificpeer-review

  57. Diffusion-limited dissolution of spherical particles: A critical evaluation and applications of approximate solutions

    Guo, X., Sietsma, J., Yang, Y., Sun, Z. & Guo, M., 2017, In : AIChE Journal. 63, 7, p. 2926-2934

    Research output: Contribution to journalArticleScientificpeer-review

  58. Effect of processing on microstructural features and mechanical properties of a reduced activation ferritic/martensitic EUROFER steel grade

    Puype, A., Malerba, L., De Wispelaere, N., Petrov, R. & Sietsma, J., 2017, In : Journal of Nuclear Materials. 494, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  59. Electrochemical extraction of rare earth metals in molten fluorides: Conversion of rare earth oxides into rare earth fluorides using fluoride additives

    Abbasalizadeh, A., Malfliet, A., Seetharaman, S., Sietsma, J. & Yang, Y., 2017, In : Journal of Sustainable Metallurgy. 3, 3, p. 627–637

    Research output: Contribution to journalArticleScientificpeer-review

  60. Electrochemical recovery of rare earth elements from magnets: Conversion of rare earth based metals into rare earth fluorides in molten salts

    Abbasalizadeh, A., Malfliet, A., Seetharaman, S., Sietsma, J. & Yang, Y., 2017, In : Materials Transactions. 58, 3, p. 400-405

    Research output: Contribution to journalArticleScientificpeer-review

  61. Electrochemistry during efficient copper recovery from complex electronic waste using ammonia based solutions

    Sun, Z., Cao, H., Venkatesan, P., Jin, W., Xiao, Y., Sietsma, J. & Yang, Y., 2017, In : Frontiers of Chemical Science and Engineering. 11, 3, p. 308-316

    Research output: Contribution to journalArticleScientificpeer-review

  62. Novel reactive anode for electrochemical extraction of rare earth metals from rare earth oxides

    Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2017, Rare Metal Technology 2017: Proceedings. Kim, H., Alam, S., Neelameggham, N. R., Oosterhof, H., Ouchi, T. & Guan, X. (eds.). Cham, Switzerland: Springer, p. 87-92 (The Minerals, Metals & Materials Series).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  63. Pingpongballen als wetenschappelijk instrument

    Sietsma, J., 2017, 175 jaar TU Delft: Erfgoed in 33 verhalen. van Woerkom, P. T. L. M., Ankersmit, W., Hagman, R., Heijmans, H. G., Olsder, G. J. & van de Schootbrugge, G. (eds.). Delft, The Netherlands: Histechnica, p. 168-172

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  64. Reconstruction of the rolling contact fatigue cracks in rails using X-ray computed tomography

    Naeimi, M., Li, Z., Qian, Z., Zhou, Y., Wu, J., Petrov, R. H., Sietsma, J. & Dollevoet, R., 2017, In : NDT&E International. 92, p. 199-212

    Research output: Contribution to journalArticleScientificpeer-review

  65. The kinetics of formation and decomposition of austenite in relation to carbide morphology

    Alvarenga, H. D., Van Steenberge, N., Sietsma, J. & Terryn, H., 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 2, p. 828-840

    Research output: Contribution to journalArticleScientificpeer-review

  66. The role of silicon in carbon partitioning processes in martensite/austenite microstructures

    Kim Lee, B. N., Sietsma, J. & Santofimia Navarro, M., 2017, In : Materials & Design. 127, p. 336-345

    Research output: Contribution to journalArticleScientificpeer-review

  67. 2016
  68. A critical evaluation of solubility of rare earth oxides in molten fluorides

    Guo, X., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 223-234

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  69. A physically based yield criterion I: Determination of the yield stress based on an alysis of pre-yield dislocation behaviour

    van Liempt, P., Bos, C. & Sietsma, J., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 662, p. 80-87

    Research output: Contribution to journalArticleScientificpeer-review

  70. A physically based yield criterion II: Incorporation of Hall Petch effect and resistance due to thermally activated dislocation glide

    van Liempt, P., Bos, C. & Sietsma, J., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 652, p. 7-13

    Research output: Contribution to journalArticleScientificpeer-review

  71. Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel

    Hajy Akbary, F., Sietsma, J., Miyamoto, G., Kamikawa, N., Petrov, R., Furuhara, T. & Santofimia Navarro, M., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 677, p. 505–514

    Research output: Contribution to journalArticleScientificpeer-review

  72. Austenite formation from martensite in a 13Cr6Ni2Mo supermartensitic stainless steel

    Bojack, A., Zhao, L., Morris, PF. & Sietsma, J., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 5, p. 1996-2009

    Research output: Contribution to journalArticleScientificpeer-review

  73. Bainite formation in medium-carbon low-silicon spring steels accounting for chemical segregation

    Goulas, K., Mecozzi, MG. & Sietsma, J., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 6, p. 3077-3087

    Research output: Contribution to journalArticleScientificpeer-review

  74. Characterization of structural change in rail surface using advance automatic crystallographic orientation microscopy

    Wu, J., Petrov, R., Li, S., Li, Z., Godet, S., Malet, L. & Sietsma, J., 2016, Proceedings of the 15th International Conference on Railway Engineering Design and Operation, CR 2016, Valencia, Spain. Brebbia, C. A. & Mera, J. M. (eds.). WIT Press, Vol. 162. p. 367-376 (WIT Transactions on the Built Environment; vol. 162).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Complex electronic waste treatment: An effective process to selectively recover copper with solutions containing different ammonium salts

    Sun, Z., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2016, In : Waste Management. 57, p. 140–148

    Research output: Contribution to journalArticleScientificpeer-review

  76. Curly malachite on archaeological bronze: A systematic study of the shape and phenomenological approach of its formation mechanism

    Nienhuis, J., Robbiola, L., Giuliani, R., Joosten, I., Huisman, H., van Os, B. & Sietsma, J., 2016, In : e-Preservation Science . 13, p. 23-32

    Research output: Contribution to journalArticleScientificpeer-review

  77. Effect of prior athermal martensite on the isothermal transformation kinetics below M s in a low-C high-Si steel

    Navarro Lopez, A., Sietsma, J. & Santofimia Navarro, MJ., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 3, p. 1028-1039

    Research output: Contribution to journalArticleScientificpeer-review

  78. Exploring bainite formation kinetics distinguishing grain-boundary and autocatalytic nucleation in high and low-Si steels

    Ravi, AM., Sietsma, J. & Santofimia, MJ., 2016, In : Acta Materialia. 105, p. 155-164

    Research output: Contribution to journalArticleScientificpeer-review

  79. Hydrometallurgical extraction of rare earth elements from low grade mine tailings

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Metal Technology 2016. Alam, S., Kim, H., Neelameggham, N. R., Ouchi, T. & Oosterhof, H. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 17-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Interaction of carbon partitioning, carbide precipitation and bainite formation during the Q&P process in a low C steel

    Hajy Akbary, F., Sietsma, J., Miyamoto, G., Furuhara, T. & Santofimia, MJ., 2016, In : Acta Materialia. 104, p. 72-83

    Research output: Contribution to journalArticleScientificpeer-review

  81. Laboratory simulation of martensite formation of white etching layer in rail steel

    Wu, J., Petrov, R. H., Naeimi, M., Li, Z., Dollevoet, R. & Sietsma, J., 2016, In : International Journal of Fatigue. 91, Part 1, p. 11-20

    Research output: Contribution to journalArticleScientificpeer-review

  82. Leaching of rare earth elements: Review of past and present technologies

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 319-334

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  83. Molecular dynamics simulations of the mechanisms controlling the propagation of bcc/fcc semi-coherent interfaces in iron

    Ou, X., Sietsma, J. & Santofimia Navarro, M., 2016, In : Modelling and Simulation in Materials Science and Engineering. 24, 5, p. 1-18

    Research output: Contribution to journalArticleScientificpeer-review

  84. Phase field modelling of microstructural evolution during the quenching and partitioning treatment in low-alloy steels

    Mecozzi, MG., Eiken, J., Santofimia, MJ. & Sietsma, J., 2016, In : Computational Materials Science. 112, Part A, p. 245-256

    Research output: Contribution to journalArticleScientificpeer-review

  85. Preferential nucleation during polymorphic transformations

    Sharma, H., Sietsma, J. & Offerman, E., 2016, In : Scientific Reports. 6, p. 1-7 30860 .

    Research output: Contribution to journalArticleScientificpeer-review

  86. Quantification of dislocation structures from anelastic deformation behaviour

    Arechabaleta Guenechea, Z., van Liempt, P. & Sietsma, J., 2016, In : Acta Materialia. 115, p. 314–323

    Research output: Contribution to journalArticleScientificpeer-review

  87. Quantitative determination of carbon concentration profiles by GD-OES for the study of decarburization in low-carbon steels

    Duarte Alvarenga, H., van Steenberge, N., Xhoffer, C., Steegstra, P., Sietsma, J. & Terryn, HA., 2016, In : Surface and Interface Analysis. 48, 2, p. 73-81

    Research output: Contribution to journalArticleScientificpeer-review

  88. Rare earth extraction from NdFeB magnets and rare earth oxides using aluminum chloride/fluoride molten salts

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 357-373

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  89. Recycling of metals from urban mines - A strategic evaluation

    Sun, ZHI., Xiao, Y., Agterhuis, H., Sietsma, J. & Yang, Y., 2016, In : Journal of Cleaner Production. 112, Part 4, p. 2977-2987

    Research output: Contribution to journalArticleScientificpeer-review

  90. Semiempirical model for the solubility of rare earth oxides in molten fluorides

    Guo, X., Sun, Z., Sietsma, J. & Yang, Y., 2016, In : Industrial and Engineering Chemistry Research. 55, 16, p. 4773-4781

    Research output: Contribution to journalArticleScientificpeer-review

  91. Thermo-mechanical effects in the formation mechanism of rail squats

    Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2016, Proceedings of the 3rd international conference on railway technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire: Civil-Comp Press, Vol. 110. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Thermodynamic aspects of carbon redistribution during ageing and tempering of Fe–Ni–C alloys

    Kim Lee, B., Sietsma, J. & Santofimia Navarro, M., 2016, In : Philosophical Magazine (London, 2003). 96, 25, p. 2632–2648

    Research output: Contribution to journalArticleScientificpeer-review

  93. Toward sustainability for recovery of critical metals from electronic waste: The hydrochemistry processes

    Sun, Z., Cao, C., Xiao, Y., Sietsma, J., Jin, W., Agterhuis, H. & Yang, Y., 2016, In : ACS Sustainable Chemistry and Engineering. 5, 1, p. 21-40

    Research output: Contribution to journalArticleScientificpeer-review

  94. “Brown etching layer”: A possible new insight into the crack initiation of rolling contact fatigue in rail steels?

    Li, S., Petrov, R., Wu, J., Li, Z., Dollevoet, R. & Sietsma, J., 2016, In : Engineering Failure Analysis. 66, p. 8–18

    Research output: Contribution to journalArticleScientificpeer-review

  95. 2015
  96. A cleaner process for selective recovery of valuable metals from electronic waste of complex mixtures of end-of-life electronic products

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2015, In : Environmental Science & Technology (Washington). 49, 13, p. 7981-7988 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. A mixed-mode model for the ferrite-to-austenite transformation in a ferrite/pearlite microstructure

    Mecozzi, MG., Bos, C. & Sietsma, J., 2015, In : Acta Materialia. 88, p. 302-313

    Research output: Contribution to journalArticleScientificpeer-review

  98. An improved X-ray diffraction analysis method to characterize dislocation density in lath martensitic structures

    Hajy Akbary, F., Sietsma, J., Bottger, AJ. & Santofimia, MJ., 2015, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 639, p. 208-218 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Waste Management. 35, p. 227-235

    Research output: Contribution to journalArticleScientificpeer-review

  100. Computation of the flash-temperature at the wheel-rail contact using a 3D finite element model and its comparison with analytical methods

    Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2015, Proceedings of the 10th international conference on contact mechanics, CM2015. Tournay, H. & Grassie, S. (eds.). Pueblo, USA: Transportation Technology Center - AAR, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Effect of Mn segregation on the microstructure development of quenching and partitioning (Q&P) steel

    Akbary, F. H., Kwakernaak, C., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 1155-1156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  102. Effect of pre-existing martensite on the isothermal transformation kinetics below the Ms temperature in a low-chigh-Si steel

    Navarro-López, A., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 559-560

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  103. Influence of carbide morphology and microstructure on the kinetics of superficial decarburization of C-Mn Steel

    Alvarenga, HD., De Putte, TV., Van Steenberge, N., Sietsma, J. & Terryn, HA., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 1, p. 123-133 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  104. Investigation of bainite formation in a chemically inhomogeneous medium carbon steel

    Goulas, K., Mecozzi, M. G. & Sietsma, J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen et al, L-Q. (ed.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 71-72

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  105. Isothermal transformations in advanced high strength steels below martensite start temperature

    da Silva, EP., de Knijf, D., Xu, W., Föjer, C., Houbaert, Y., Sietsma, J. & Petrov, RH., 2015, In : Materials Science and Technology. 31, 7, p. 808-816

    Research output: Contribution to journalArticleScientificpeer-review

  106. Microstructural evolution during ultrafast heat treament of medium carbon steels

    Papaefthymiou, S., Goulas, K., Cerda, F. C., Sietsma, J. & Petrov, R., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 569-570

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 Next

ID: 138382