1. 3D Cellular automata modelling of solid-state transformations relevant in low-alloy steel production.

    Mecozzi, MG., Bos, C. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 1140-1145 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  2. 3D Neutron depolarization experiments on the gamma/alpha phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, ECNS99 Conference.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  3. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. 3DXRD characterization and modeling of solid-state transformation processes.

    Juul Jensen, D., Offerman, SE. & Sietsma, J., 2008, In : MRS Bulletin. 33, p. 621-629 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. 3DXRD microscopy for the study of solid-state phase transformation kinetics.

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. A cleaner process for selective recovery of valuable metals from electronic waste of complex mixtures of end-of-life electronic products

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2015, In : Environmental Science & Technology (Washington). 49, 13, p. 7981-7988 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. A coupled thermal-mechanical FE model of flow localization during the hot torsion test.

    Mirzakhani, B., Khoddam, S., Arabi, H., Salehi, MT. & Sietsma, J., 2009, In : Steel Research International. 80, p. 846-854 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. A critical evaluation of solubility of rare earth oxides in molten fluorides

    Guo, X., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 223-234

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  11. A dual-mesh strategy for microstructure development in a macroscopic heat affected zone: Studies on AISI1316L and AISI1005

    Thiessen, RG., Richardson, IM. & Sietsma, J., 2006, Proceedings Trends in Welding Research, Proceedings of the 7th Int. Conference, Pine Mountain, Georgia, USA. David, S. A., DebRoy, T., Lippold, J. C., Smartt, H. B. & Vitek, J. M. (eds.). SL: ASM International, p. 993-1000 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  12. A flow stress model for the intercritical deformation of low-carbon steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, Modelling of metal rolling processes 3.. IOM Communications Ltd., p. 268-279 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  13. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. A microstructural study of rolling contact fatigue in rails

    Wu, J., Petrov, RH., Naeimi, M., Li, Z. & Sietsma, J., 2014, Proceedings of the 2nd International Conference on Railway Technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire, UK: Civil-Comp Press, p. 1-18 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  15. A microstructure model for recrystallisation and phase transformation during the dual-phase steel annealing cycle.

    Bos, C., Mecozzi, MG. & Sietsma, J., 2010, In : Computational Materials Science. 48, p. 692-699 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. A mixed-mode model for partitioning phase transformations.

    Bos, C. & Sietsma, J., 2007, In : Scripta Materialia. 57, p. 1085-1088 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. A mixed-mode model for the ferrite-to-austenite transformation in a ferrite/pearlite microstructure

    Mecozzi, MG., Bos, C. & Sietsma, J., 2015, In : Acta Materialia. 88, p. 302-313

    Research output: Contribution to journalArticleScientificpeer-review

  18. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. A novel 2D analysis method to study individual grains using high-energy X-ray microbeam diffraction

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2007, In : Advances in X-Ray Analysis. 51, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 9, p. 2789-2797 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. A phase transformation model for the austenitisation of martensite in dual-phase steel

    Thiessen, RG., Sietsma, J. & Richardson, IM., 2006, Thermec 2006, 5th International Conference on Processing and Manufacturing of Advanced Materials, Vancouver, Canada. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Stafa-Zuerich, Switzerland: Trans Tech Publications, p. 4608-4613 6 p. (Materials Science Forum; vol. 539-543).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  22. A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 595-602 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. A physically based yield criterion I: Determination of the yield stress based on an alysis of pre-yield dislocation behaviour

    van Liempt, P., Bos, C. & Sietsma, J., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 662, p. 80-87

    Research output: Contribution to journalArticleScientificpeer-review

  24. A physically based yield criterion II: Incorporation of Hall Petch effect and resistance due to thermally activated dislocation glide

    van Liempt, P., Bos, C. & Sietsma, J., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 652, p. 7-13

    Research output: Contribution to journalArticleScientificpeer-review

  25. A physics-based transformation model for low-carbon steels: from first principles to on-line application

    van Leeuwen, Y., Luinenburg, A. W., Onink, M., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientific

  26. A possible mechanism for atomic transport in amorphous metals.

    van Ee, LD., Thijsse, BJ. & Sietsma, J., 1998, Materials Research Society Symposium Proceedings 1998.. p. 157-162 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  27. A quantification of the kinetic character of mixed-mode solid-state phase transformations.

    Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  28. A quantitative investigation of the effect of Mn segregation on microstructural properties of quenching and partitioning steels

    Hajy Akbary, F., Sietsma, J., Petrov, R. H., Miyamoto, G., Furuhara, T. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 137, p. 27-30

    Research output: Contribution to journalArticleScientificpeer-review

  29. A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys.

    Wits, JJ., Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 283, p. 234-241 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. A study on the effect of plastic deformation on the austenite-to-ferrite phase transformation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proceedings (2nd version) of J.J. Jonas Symposium on thermomechanical processing of steel.. p. 735-750 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  31. A three-dimensional model for the development of the microstructure in steel during slow cooling

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 2000, 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. A three-dimensional model for the development of the microstructure in steel during slow cooling.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Accurate representation of the distributions of the 3D Poisson-Voronoi typical cell geometrical features

    Vittorietti, M., Kok, P. J. J., Sietsma, J. & Jongbloed, G., 2019, In : Computational Materials Science. 166, p. 111-118 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Acoustic emission as a probe of the kinetics of the martensitic transformation in a shape memory alloy

    van Bohemen, SMC., Sietsma, J., Petrov, RH., Hermans, MJM. & Richardson, IM., 2006, In : Materials Transactions. 47, 3, p. 607-611 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Acoustic emission as a probe of the kinetics of the martensitic transformation in low-alloy steel.

    van Bohemen, SMC., Sietsma, J., Hermans, MJM. & Richardson, IM., 2003, Proc. of The Conference of Metallurgists, COM2003, Vancouver, Canada, August 24-27, 2003.. Militzer, W., Poole, WJ. & Essadiqi, E. (eds.). Vancouver, Canada: COM 2003, p. 125-139 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  36. Acoustic emission investigations on the ferrite and bainite formation in low-alloy steel during ultra-fast cooling.

    Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  37. Acoustic-emission investigations on the austenite decomposition in a medium-carbon steel.

    Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2003, Tranformation and Deformation Mechanisms in Advanced High-Strength Steels.. Militzer, M., Essadiqu, E. & Poole, W. J. (eds.). Vancouver, Canada: COM 2003, p. 109-124 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  38. Advanced hot rolling practice and products for the production of hot rolled strips.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, . Joint ECSC-Steel NEST workshop advanced hot rolling practice and products.. Düsseldorf, Germany: VDeh, p. 1-3 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  39. Ageing behaviour of neutron/irradiated Eurofer97

    Carvalho, I., Fedorov, A., Kolluri, M., Luzginova, N., Schut, H. & Sietsma, J., 2018, The Ageing of Materials and Structures: Towards Scientific Solutions for the Ageing of Our Assets. van Breugel, K., Koleva, D. & van Beek, T. (eds.). Cham, Switzerland: Springer, p. 111-118

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  40. Ageing in retained austenite containing steels

    Amirthalingam, M., Bojack, A., Zhao, L., Hermans, MJM., Sietsma, J. & Richardson, IM., 2013.

    Research output: Contribution to conferencePosterProfessional

  41. Alpha'-martensite formation in deep-drawn Mn-based TWIP steel.

    van Tol, RT., Kim, JK., Zhao, L., Sietsma, J. & De Cooman, BC., 2012, In : Journal of Materials Science. 47, p. 4845-4850 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. An age-hardening model for Al-Mg-Si alloys considering needle-shaped precipitates.

    Bahrami, A., Miroux, AG. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 43, 11, p. 4445-4453 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. An ageing model for Al-Mg-Si alloys assuming the needle-shaped morphology for precipitates.

    Bahrami, A., Miroux, AG. & Sietsma, J., 2010, Proceedings of the 12th International Conference on Aluminium Alloys. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Tokyo, Japan: The Japan institute of Light Metals, p. 401-406 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  44. An environmentally friendly electro-oxidative approach to recover valuable elements from NdFeB magnet waste

    Venkatesan, P., Sun, Z. H. I., Sietsma, J. & Yang, Y., 2018, In : Separation and Purification Technology. 191, p. 384-391

    Research output: Contribution to journalArticleScientificpeer-review

  45. An improved X-ray diffraction analysis method to characterize dislocation density in lath martensitic structures

    Hajy Akbary, F., Sietsma, J., Bottger, AJ. & Santofimia, MJ., 2015, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 639, p. 208-218 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. An investigation of the kinetics of the austenite to ferrite transformation from deformed austenite.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proc. Third International Conference on Modelling of Metal Rolling Processes.. London: Institute of Metals, p. 431-440 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  47. Analysis of acoustic emission signals originating from bainite and martensite formation.

    van Bohemen, SMC., Sietsma, J., Hermans, MJM. & Richardson, IM., 2005, In : Philosophical Magazine (London, 2003). 85, 16, p. 1791-1804 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling.

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 1431-1440 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Analysis of nucleation and interfacial mobility for polygonal ferrite formation using phase field simulations.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2006, TMS Letters, Proceedings of the TMS 2006 Annual Meeting. Thoma, D. (ed.). USA: TMS, p. 15-16 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  50. Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel

    Hajy Akbary, F., Sietsma, J., Miyamoto, G., Kamikawa, N., Petrov, R., Furuhara, T. & Santofimia Navarro, M., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 677, p. 505–514

    Research output: Contribution to journalArticleScientificpeer-review

  51. Analysis of the quenching and partitioning (Q&P) process with partial austenitisation in a low-C high-Al steel by phase field modelling.

    Santofimia Navarro, MJ., Takahama, Y., Zhao, L. & Sietsma, J., 2008, Proceedings of the International Conference on New Development on Metallurgy and Applications of High Strength Steels.. s.n. (ed.). Buenos Aires, Argentina: s.n., p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  52. Analysis of the y - a transformation in a C-Mn steel by dilatometry, laser scanning confocal microscopy and phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2003, EPD 2003 conference in Chicago. Damm, E. B. & Merwin, M. J. (eds.). Chicago, USA: EPD, p. 353-366 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  53. Analysis of the y - a transformation in a C-Mn steel by phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2005, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 36A, (9), p. 2327-2340 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Analytical formulation for temperature evolution in flat wheel-rail sliding surfaces

    Alizadeh Otorabad, H., Tehrani, P. H., Younesian, D., Sietsma, J. & Petrov, R., 2018, In : Mathematical Problems in Engineering: theory, methods and applications. 2018, 7 p., 4239658.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Anisotropic dilatation behaviour during transformation of hot rolled steels showing banded structure.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Technology. 17, 12, p. 1569-1574 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Application of a three-dimensional microstructure evolution model to identify key processing settings for the production of dual-phase steels.

    Bos, C., Mecozzi, MG., Hanlon, DN., Aarnts, MP. & Sietsma, J., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42, p. 3602-3610 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Application of the level-set method to a mixed-mode driven Stefan problem in 2D and 3D

    den Ouden, D., Segal, A., Vermolen, FJ., Zhao, L., Vuik, C. & Sietsma, J., 2013, In : Computing. 95, 1, p. 553-572 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Application of the maximum driving force concept for solid-state partitioning phase transformations in multi-component systems.

    Bos, C. & Sietsma, J., 2009, In : Acta Materialia. 57, p. 136-144 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Atomic scale simulation of magnesium single crystals.

    Phelan, DJ., Stanford, N., Thijsse, BJ. & Sietsma, J., 2010, In : Materials Science Forum. 638-642, p. 1585-1590 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Atomic two-level states and relaxations observed in a computer model of amorphous Ni81N19.

    van Ee, LD., Thijsse, BJ. & Sietsma, J., 1998, In : Physica B: Condensed Matter. 57, 2, p. 906-913 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

    Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Characterization. 152, p. 67-75

    Research output: Contribution to journalArticleScientificpeer-review

  62. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite and Decomposition. Damm, EB. & Merwin, EB. (eds.). Warrendale: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  63. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite Formation and Decomposition. Damm, EB. & Merwin, M. (eds.). Warrendale, USA: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  64. Austenite formation from martensite in a 13Cr6Ni2Mo supermartensitic stainless steel

    Bojack, A., Zhao, L., Morris, PF. & Sietsma, J., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 5, p. 1996-2009

    Research output: Contribution to journalArticleScientificpeer-review

  65. Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating

    Castro Cerda, F. M., Sabirov, I., Goulas, K., Sietsma, J., Monsalve, A. & Petrov, R. H., 2017, In : Materials & Design. 116, p. 448-460

    Research output: Contribution to journalArticleScientificpeer-review

  66. Austenite formation in C35 and C45 alloys.

    Savran, VI., van Leeuwen, Y., Hanlon, DN. & Sietsma, J., 2007, In : Materials Science Forum. 539-543, 5, p. 4637-4642 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Austenite nucleation and growth observed on the level of individual grains by three-dimensional X-ray diffraction microscopy.

    Savran, VI., Offerman, SE. & Sietsma, J., 2010, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 41A, p. 583-591 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Austenization of hot and cold-rolled C-Mn steels. Internship report.

    Savran, VI., Bakels, J. G., Colijn, J. & Sietsma, J., 2006, Delft: Technische Universiteit Delft. 34 p.

    Research output: Book/ReportReportProfessional

  69. Bainite formation in medium-carbon low-silicon spring steels accounting for chemical segregation

    Goulas, K., Mecozzi, MG. & Sietsma, J., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 6, p. 3077-3087

    Research output: Contribution to journalArticleScientificpeer-review

  70. Bainite formation kinetics in high carbon alloyed steel.

    Luzginova, NV., Zhao, L. & Sietsma, J., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 481, 2, p. 766-769 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. Bainite formation kinetics in steels and the dynamic nature of the autocatalytic nucleation process

    Ravi, A. M., Sietsma, J. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 140, p. 82-86

    Research output: Contribution to journalArticleScientificpeer-review

  72. Barrier free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel

    van Dijk, NH., Offerman, SE., Sietsma, J. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 4489-4498 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Bestudering van de kinetiek van nucleatie- en groeiprocessen tijdens diffusionele transformaties in staal met behulp van neutronendepolarisatie.

    van Dijk, NH., Rekveldt, MT., Sietsma, J., te Velthuis, SGE. & van der Zwaag, S., 1999, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  74. Bronze studs: colouring, reconstruction and conservation

    Nienhuis, J., Sietsma, J., Fontijn, D., Joosten, I. & Dik, J., 2013, Transformation through Destruction. A monumental and extraordinary early Iron Age Hallstatt C barrow from the ritual landscape of Oss-Zevenbergen. Fontijn, D., van der Vaart, S. & Jansen, R. (eds.). Leiden, The Netherlands: Sidestone Press, p. 213-237 348 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  75. Carbon redistribution in a quenched and partitioned steel analysed by atom probe tomography.

    Santofimia Navarro, MJ., Zhao, L., Povstugar, I., Choi, P-P., Raabe, D. & Sietsma, J., 2012, Proceedings 3rd International Sympsium on Steel Science - Nanoscale Inhomogeneity in Steels ¿ Fundamentals and effects on microstructures and properties. Furuhara, T., Numakura, H. & Ushioda, K. (eds.). Tokyo, Japan: ISIJ, p. 155-158 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  76. Cementite dissolution at 860 degrees C in an Fe-Cr-C steel

    Zhao, L., Vermolen, FJ., Wauthier, A. & Sietsma, J., 2006, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 37A, p. 1841-1850 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Cementite dissolution in a bainitic steel.

    Zhao, L., Vermolen, FJ., Peekstok, ER. & Sietsma, J., 2003.

    Research output: Contribution to conferencePosterProfessional

  78. Characterisation and quantification of microstructural banding in dual phase steels Part 1 - General 2D study

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2012, In : Materials Science and Technology. 28, 8, p. 895-902 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Characterisation and quantification of microstructural banding in dual-phase steels Part 2 - case study extending to 3D

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2012, In : Materials Science and Technology. 28, 8, p. 903-910 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Waste Management. 35, p. 227-235

    Research output: Contribution to journalArticleScientificpeer-review

  81. Characteristics of the static recrystallisation kinetics of an intercritically deformed C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 293-298 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Characterization of NbC and (Nb,Ti)N nanoprecipitates in TRIP assisted multi phase steels¿

    Tirumalasetty, GK., van Huis, MA., Fang, C., Xu, Q., Tichelaar, FD., Hanlon, DN., Sietsma, J. & Zandbergen, HW., 2011, In : Acta Materialia. 59, 19, p. 7406-7415 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Characterization of bainitic/martensitic structures formed in isothermal treatments below the Ms temperature

    Navarro-López, A., Hidalgo Garcia, J., Sietsma, J. & Santofimia Navarro, M. J., 2017, In : Materials Characterization. 128, p. 248-256

    Research output: Contribution to journalArticleScientificpeer-review

  84. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels.

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 6713-6723 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Characterization of structural change in rail surface using advance automatic crystallographic orientation microscopy

    Wu, J., Petrov, R., Li, S., Li, Z., Godet, S., Malet, L. & Sietsma, J., 2016, Proceedings of the 15th International Conference on Railway Engineering Design and Operation, CR 2016, Valencia, Spain. Brebbia, C. A. & Mera, J. M. (eds.). WIT Press, Vol. 162. p. 367-376 (WIT Transactions on the Built Environment; vol. 162).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  86. Characterization of the burden behaviour of iron ore pellets mixed with nut coke under simulated blast furnace conditions

    Gavel, D. J., Song, Q., Adema, A., van der Stel, J., Sietsma, J., Boom, R. & Yang, Y., 2018, In : Ironmaking & Steelmaking: processes, products and applications. 47 (2020), 2, p. 195-202

    Research output: Contribution to journalArticleScientificpeer-review

  87. Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steel.

    Santofimia Navarro, MJ., Zhao, L., Petrov, RH. & Sietsma, J., 2008, In : Materials Characterization. 58, p. 1758-1764 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation.

    Dmitrieva, O., Ponge, D., Inden, G., Millán, J., Choi, P., Sietsma, J. & Raabe, D., 2011, In : Acta Materialia. 59, p. 364-374 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Cluster formation of pearlite colonies during the austenite/pearlite phase transformation in eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, In : Physica B: Condensed Matter. 335, p. 99-103 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Coalescence of martensite under uniaxial tension of iron crystallites by atomistic simulations

    Ou, X., Sietsma, J. & Santofimia, M. J., 13 May 2020, In : Materials Science and Technology (United Kingdom).

    Research output: Contribution to journalArticleScientificpeer-review

  91. Collectieve atoomsprongen zorgen voor atoomtransport in amorfe metalen.

    van Ee, LD., Sietsma, J. & Thijsse, BJ., 1998, FOM jaarboek. Utrecht, p. 61-62 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

  92. Combined martensite and bainite formation from austenite decomposition in HSLA steel

    da Silva, EP., Xu, W., Fojer, C., Hoebaert, Y., Sietsma, J. & Petrov, RH., 2014, Proceedings of the 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 682-687 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  93. Combining bainite and martensite in steel microstructures for light-weight applications.

    Santofimia Navarro, MJ., van Bohemen, SMC. & Sietsma, J., 2013, Ferrous and Base Metals Development - Proceedings FERROUS 2012. Johannesburg, South Africa: South African Institute of Mining and Metallurgy, p. 205-216 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  94. Combining bainite and martenste in steel microstructures for light-weight applications.

    Santofimia Navarro, MJ., van Bohemen, SMC. & Sietsma, J., 2012, Symposium Series S73, Ferrous and Base Metals Development. s.n. (ed.). Magaliesburg, South Africa: The Southern African institute of Mining and Metallurgy, p. 205-216 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  95. Complex electronic waste treatment: An effective process to selectively recover copper with solutions containing different ammonium salts

    Sun, Z., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2016, In : Waste Management. 57, p. 140–148

    Research output: Contribution to journalArticleScientificpeer-review

  96. Computation of the flash-temperature at the wheel-rail contact using a 3D finite element model and its comparison with analytical methods

    Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2015, Proceedings of the 10th international conference on contact mechanics, CM2015. Tournay, H. & Grassie, S. (eds.). Pueblo, USA: Transportation Technology Center - AAR, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  97. Controlling retained austenite stability in TRIP steel

    Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

Previous 1 2 3 4 5 Next

ID: 138382