1. 2015
  2. Isothermal transformations in advanced high strength steels below martensite start temperature

    da Silva, EP., de Knijf, D., Xu, W., Föjer, C., Houbaert, Y., Sietsma, J. & Petrov, RH., 2015, In : Materials Science and Technology. 31, 7, p. 808-816

    Research output: Contribution to journalArticleScientificpeer-review

  3. Microstructural evolution during ultrafast heat treament of medium carbon steels

    Papaefthymiou, S., Goulas, K., Cerda, F. C., Sietsma, J. & Petrov, R., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 569-570

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  4. Molecular dynamics simulation of the effects of FCC/BCC interfaces on the nucleation and growth of martensite in iron

    Ou, X., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 817-824

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  5. Selective copper recovery from complex mixtures of end-of-life electronic products with ammonia-based solution

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Hydrometallurgy. 152, p. 91-99 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Simultaneous electrochemical recovery of rare earth elements and iron from magnet scrap: A theoretical analysis

    Venkatesan, P., Sun, Z., Sietsma, J. & Yang, Y., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Filho, WL. (eds.). Amsterdam, The Netherlands: Elsevier, p. 335-346

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  7. Spinodal decomposition and the carbon solubility in BCC Fe-C

    Kim Lee, B. N., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & G. B. E. A. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 301-302

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  8. Understanding the role of prior austenite grain size in isothermal bainite formation kinetics

    Ravi, A. M., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 643-644

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  9. 2014
  10. A microstructural study of rolling contact fatigue in rails

    Wu, J., Petrov, RH., Naeimi, M., Li, Z. & Sietsma, J., 2014, Proceedings of the 2nd International Conference on Railway Technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire, UK: Civil-Comp Press, p. 1-18 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  11. Combined martensite and bainite formation from austenite decomposition in HSLA steel

    da Silva, EP., Xu, W., Fojer, C., Hoebaert, Y., Sietsma, J. & Petrov, RH., 2014, Proceedings of the 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 682-687 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  12. Dose effects in He implanted Eurofer97 steel (article no. 012019)

    Carvalho Monteiro De Sena Silv, I., Schut, H., Fedorov, A., Luzginova, N., Desgardin, P. & Sietsma, J., 2014, Proceedings13th International Workshop on Slow Positron Beam Techniques and Applications (SLOPOS 2013). Bristol, UK: IOPscience, p. 1-5 5 p. (Journal of Physics: Conference Series; vol. 505).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. Elastic strain measurement of miniature tensile specimens

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, In : Experimental Mechanics. 54, 2, p. 165-173 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Electrochemical recovery of rare earth elements from magnet scraps: A theoretical analysis

    Venkatesan, P., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference ERES 2014). Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 163-170 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  15. In situ thermo-magnetic investigation of the austenitic phase during tempering of a 13Cr6Ni2Mo supermartensitic stainless steel.

    Bojack, A., Zhao, L., Morris, PF. & Sietsma, J., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 13, p. 5956-5967 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. In-situ observation of changing crystal orientations during austenite grain coarsening.

    Sharma, H., Huizenga, RM., Bytchkov, A., Sietsma, J. & Offerman, SE., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, JJ. (eds.). Heidelberg, Germany: Springer, p. 109-129 259 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  17. In-situ synchrotron diffraction studies on transformation strain development in a high strength quenched and tempered structural steel¿part I. Bainitic transformation

    Dutta, RK., Huizenga, RM., Murugaiyan, A., King, A., Gao, H., Hermans, MJM., Sietsma, J. & Richardson, IM., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 1, p. 218-229

    Research output: Contribution to journalArticleScientificpeer-review

  18. In-situ synchrotron difraction studies on the formation, decomposition and stabiisation of austenite in TRIP steels during simulated weld thermal cycles.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Heidelberg, Germany: Springer, p. 71-88

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  19. Influence of the partitioning treatment on the mechanical properties of a 0.3c-1.5si-3.5mn Q&P steel

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, Proceedings 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 224-229 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  20. Kinetics of martensite formation in plain carbon steels: critical assessment of possible influence of austenite grain boundaries and autocatalysis

    van Bohemen, SMC. & Sietsma, J., 2014, In : Materials Science and Technology. 30, 9, p. 1024-1033 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Leaching of rare earth elements: Past and present

    Peelman, S., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 446-456 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  22. Microstructural analysis of martensite constituents in quenching and partitioning steels

    Santofimia Navarro, MJ., Petrov, RH., Zhao, L. & Sietsma, J., 2014, In : Materials Characterization. 92, p. 91-95 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Nonparametric inference in a stereological model with oriented cylinders applied to dual phase steel

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2014, In : The Annals of Applied Statistics. 8, 4, p. 2538-2566 29 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Optimizing mechanical properties of a 0.3C-1.5Si-3.5Mn quenched and partitioned steel.

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, In : Advanced Materials Research. 829, p. 100-104 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Phase transformations during the decomposition of austenite below Ms in a low-carbon steel

    Pinto da Silva, E., Xu, W., Föjer, C., Houbaert, Y., Sietsma, J. & Petrov, RH., 2014, In : Materials Characterization. 95, p. 85-93 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Rare earth extraction from NdFeB magnet and rare earth oxides using molten salt processes

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 178-189 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  27. Recovery of valuable metals from mixture of end-of-life electronic products - a hydrometallurgy path.

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., de Visser, G. & Yang, Y., 2014, Proceedings of Going Green Care Innovation Conference 2014. Vienna, Austria: Austrian Society for Systems Engineering and Automation, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  28. Solubility of rare earth oxides in molten fluorides

    Guo, X., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 149-155 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. Strategic evaluations on electronic wastes for metal recycling.

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., de Visser, G. & Yang, Y., 2014.

    Research output: Contribution to conferencePosterProfessional

  30. Structural tale of two novel (Cr, Mn)C carbides in steel

    Tirumalasetty, GK., Fang, CM., Jansen, J., Yokosawa, T., Boeije, MFJ., Sietsma, J., van Huis, MA. & Zandbergen, HW., 2014, In : Acta Materialia. 78, p. 161-172 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Substantial fatigue similarity of a new small-scale test rig to actual wheel-rail system

    Naeimi, M., Li, Z., Petrov, RH., Dollevoet, RPBJ., Sietsma, J. & Wu, J., 2014, Proceedings of the International Conference on Railway Systems Engineering and Management. Liu, G., Said, R. & et, A. (eds.). Riverside, UK: WASET, p. 1795-1803 9 p. (International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering; vol. 8).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  32. Unravelling the structural and chemical features influencing deformation-induced martensitic transformations in steels

    Tirumalasetty, GK., van Huis, MA., Kwakernaak, C., Sietsma, J., Sloof, WG. & Zandbergen, HW., 2014, In : Scripta Materialia. 71, p. 29-32 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. 2013
  34. Ageing in retained austenite containing steels

    Amirthalingam, M., Bojack, A., Zhao, L., Hermans, MJM., Sietsma, J. & Richardson, IM., 2013.

    Research output: Contribution to conferencePosterProfessional

  35. Application of the level-set method to a mixed-mode driven Stefan problem in 2D and 3D

    den Ouden, D., Segal, A., Vermolen, FJ., Zhao, L., Vuik, C. & Sietsma, J., 2013, In : Computing. 95, 1, p. 553-572 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Bronze studs: colouring, reconstruction and conservation

    Nienhuis, J., Sietsma, J., Fontijn, D., Joosten, I. & Dik, J., 2013, Transformation through Destruction. A monumental and extraordinary early Iron Age Hallstatt C barrow from the ritual landscape of Oss-Zevenbergen. Fontijn, D., van der Vaart, S. & Jansen, R. (eds.). Leiden, The Netherlands: Sidestone Press, p. 213-237 348 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  37. Combining bainite and martensite in steel microstructures for light-weight applications.

    Santofimia Navarro, MJ., van Bohemen, SMC. & Sietsma, J., 2013, Ferrous and Base Metals Development - Proceedings FERROUS 2012. Johannesburg, South Africa: South African Institute of Mining and Metallurgy, p. 205-216 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  38. Effect of niobium and grain boundary density on the fire resistance of Fe-C-Mn steel.

    Dere, EG., Sharma, H., Petrov, RH., Sietsma, J. & Offerman, SE., 2013, In : Scripta Materialia. 68, p. 651-654 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Formation of (Fe,Cr) carbides and dislocation structures in low-chromium steel studied in situ using synchrotron radiation.

    Dere, EG., Sharma, H., Huizenga, RM., Portale, G., Bras, W., Bliznuk, V., Sietsma, J. & Offerman, SE., 2013, In : Journal of Applied Crystallography. 46, p. 181-192 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Helium implanted Eurofer97 characterized by positron beam Doppler broadening and Thermal Desorption Spectroscopy

    Carvalho Monteiro De Sena Silv, I., Schut, H., Fedorov, A., Luzginova, N., Desgardin, P. & Sietsma, J., 2013, In : Journal of Nuclear Materials. 442, 1 - 3, p. 377-381 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Helium implanted RAFM steels studied by positron beam Doppler broadening and thermal desorption spectroscopy

    Carvalho Monteiro De Sena Silv, I., Schut, H., Fedorov, A., Luzginova, N., Desgardin, P. & Sietsma, J., 2013, Proceedings 16th International Conference on Positron Annihilation. Coleman, P., Alam, A., Dugdale, S. & Roussenova, M. (eds.). Bristol: IOP Publishing, p. 1-4 4 p. (Journal of Physics: Conference Series; vol. 443).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  42. Hydrometallurgical recovery of copper from complex mixtures of end-of-life shredded ICT products

    Xiao, Y., Yang, Y., van den Berg, JAM., Sietsma, J., Agterhuis, H., de Visser, G. & Bol, D., 2013, In : Hydrometallurgy. 140, p. 128-134 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Influence of martensite tempering on the mechanical properties of a 0.3C-1.5Si-3.5Mn Q&P steel

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2013.

    Research output: Contribution to conferencePosterProfessional

  44. Investigation of the delayed fracture phenomenon in deep-drawn austenitic manganese-based twinning-induced plasticity steels.

    van Tol, RT., Zhao, L., Bracke, L., Kömmelt, P. & Sietsma, J., 2013, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44A, p. 4654-4660 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Kinetics of austenite decomposition in manganese-based steel

    van Tol, RT., Zhao, L. & Sietsma, J., 2013, In : Acta Materialia. 64, 2014, p. 33-40 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Magnetic detection of small fractions of ferromagnetic martensite within the paramagnetic austenite matrix of TWIP steel.

    Zhao, L., van Dijk, NH., Lefering, AJE. & Sietsma, J., 2013, In : Journal of Materials Science. 48, p. 1474-1479 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Measurement and characterization of thermo-mechanical fatigue in compacted graphite iron.

    Ghodrat, S., Riemslag, AC., Janssen, M., Sietsma, J. & Kestens, LAI., 2013, In : International Journal of Fatigue. 48, p. 319-329 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Microstructural development and deformation mechanisms during cold rolling of a medium stacking fault energy TWIP steel.

    Ofei, KA., Zhao, L. & Sietsma, J., 2013, In : Materials Science and Technology. 29, 2, p. 161-167 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Microstructure and properties of ultrafast annealed high strength steels.

    Petrov, RH., Hajy Akbary, F., Saz, FR., Sidor, J., Santofimia Navarro, MJ., Sietsma, J. & Kestens, LAI., 2013, In : Materials Science Forum. 753, p. 554-558 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Microstructure, tensile and toughness properties after quenching and partitioning treatments of a medium-carbon steel.

    Paravicini Bagliani, E., Santofimia Navarro, MJ., Zhao, L., Sietsma, J. & Anelli, E., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 559, p. 486-495 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Modeling of strain hardening in the aluminium alloy AA6061.

    Bahrami, A., Miroux, AG. & Sietsma, J., 2013, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 5, p. 2409-2417 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Modelling precipitate nucleation and growth with multiple precipitate species under isothermal conditions: Formulation and analysis.

    den Ouden, D., Zhao, L., Vuik, C., Sietsma, J. & Vermolen, FJ., 2013, In : Computational Materials Science. 79, p. 933-943 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Perspectives in high strength steels: interactions between non-equilibrium phases

    Santofimia Navarro, MJ., Hanlon, DN., Sietsma, J. & van Bohemen, SMC., 2013, Proceedings of the 2013 International Symposium on New Developments in Advanced High-Strength Sheet Steels.. Hickey, KD. & Ashburn, RE. (eds.). Warrendale, PA, USA: Association for Iron & Steel Technology, p. 331-339 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  54. Physical modelling the microstructure formation in advanced high-strength steels

    Sietsma, J., 2013, In : Materials Science Forum. 762, p. 194-209 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Poster: Storytelling: white layers on bronze.

    Nienhuis, J., Sietsma, J., Fontijn, D., Joosten, I., Dik, J. & Mol, JMC., 2013.

    Research output: Contribution to conferencePosterProfessional

  56. Toward a recrystallized microstructure in extruded AA6005A alloy

    Bahrami, A., den Bakker, AJ., Miroux, AG. & Sietsma, J., 2013, Light Metals 2013- Proceedings 142nd Annual Meeting & Exhibition. Sadler, BA. (ed.). Hoboken, NJ, USA: John Wiley & Sons, p. 347-350 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  57. Volume expansion of compacted graphite iron induced by pearlite decomposition and the effect of oxidation at elevated temperature.

    Ghodrat, S., Janssen, M., Kestens, LAI. & Sietsma, J., 2013, In : Oxidation of Metals. 80, 1-2, p. 161-176 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. 2012
  59. Alpha'-martensite formation in deep-drawn Mn-based TWIP steel.

    van Tol, RT., Kim, JK., Zhao, L., Sietsma, J. & De Cooman, BC., 2012, In : Journal of Materials Science. 47, p. 4845-4850 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. An age-hardening model for Al-Mg-Si alloys considering needle-shaped precipitates.

    Bahrami, A., Miroux, AG. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 43, 11, p. 4445-4453 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Carbon redistribution in a quenched and partitioned steel analysed by atom probe tomography.

    Santofimia Navarro, MJ., Zhao, L., Povstugar, I., Choi, P-P., Raabe, D. & Sietsma, J., 2012, Proceedings 3rd International Sympsium on Steel Science - Nanoscale Inhomogeneity in Steels ¿ Fundamentals and effects on microstructures and properties. Furuhara, T., Numakura, H. & Ushioda, K. (eds.). Tokyo, Japan: ISIJ, p. 155-158 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  62. Characterisation and quantification of microstructural banding in dual phase steels Part 1 - General 2D study

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2012, In : Materials Science and Technology. 28, 8, p. 895-902 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Characterisation and quantification of microstructural banding in dual-phase steels Part 2 - case study extending to 3D

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2012, In : Materials Science and Technology. 28, 8, p. 903-910 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. Combining bainite and martenste in steel microstructures for light-weight applications.

    Santofimia Navarro, MJ., van Bohemen, SMC. & Sietsma, J., 2012, Symposium Series S73, Ferrous and Base Metals Development. s.n. (ed.). Magaliesburg, South Africa: The Southern African institute of Mining and Metallurgy, p. 205-216 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  65. Deformation induced austenite grain rotation and transformation in TRIP assisted steel

    Tirumalasetty, GK., van Huis, MA., Kwakernaak, C., Sietsma, J., Sloof, WG. & Zandbergen, HW., 2012, In : Acta Materialia. 60, p. 1311-1321 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Dislocation annihiliation in plastic deformation: II. Kocks-Mecking analysis.

    Galindo Nava, EI., Sietsma, J. & Rivera Diaz del Castillo, PEJ., 2012, In : Acta Materialia. 60, p. 2615-2624 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Effects of holding time on thermo-mechanical fatigue properties of compacted graphite iron through tests with notched specimens

    Ghodrat, S., Riemslag, AC., Kestens, LAI., Petrov, RH., Janssen, M. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 5, p. 2121-2130 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Employing mathematical and physical concepts to build 3D microstructure models on the basis of well-accessible 2D experiments.

    McGarrity, KS., Jongbloed, G. & Sietsma, J., 2012, Delft, The Netherlands: Delft University of Technology. 8 p.

    Research output: Book/ReportReportProfessional

  69. Experimental investigation of structural defects in deep-drawn austenitic Mn-based TWIP steel.

    van Tol, RT., Zhao, L., Schut, H. & Sietsma, J., 2012, In : Materials Science and Technology. 28, 3, p. 348-352 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. In situ determination of austenite and martensite formation in 13Cr6Ni2Mo supermartensitic stainless steel.

    Bojack, A., Zhao, L., Morris, PF. & Sietsma, J., 2012, In : Materials Characterization. 71, p. 77-86 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. In-situ synchrotron diffraction studies on the formation, stabilisation and decomposition of austenite in trip steels during simulated weld thermal cycles

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2012, Proceedings of the Visual-JW2012. s.n. (ed.). s.l.: s.n., p. 1-2 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  72. Investigation of deformation mechanisms in deep-drawn and tensile-strained austenitic Mn-based TWIP steel.

    van Tol, RT., Zhao, L., Schut, H. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 43, 9, p. 3070-3077 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Microstructural features of oxidation induces volume change of compacted graphite iron at elevated temperature annealing

    Ghodrat, S., Janssen, M., Kestens, LAI. & Sietsma, J., 2012, In : Oxidation of Metals. 79, 3/4

    Research output: Contribution to journalArticleScientificpeer-review

  74. Microstructure controlled thermo-mechanical fatigue of compacted graphite iron for engine blocks.

    Ghodrat, S., Janssen, M., Sietsma, J., Petrov, RH. & Kestens, LAI., 2012, Delft: Delft University of Technology. 14 p.

    Research output: Book/ReportReportProfessional

  75. Microstructure modelling of solid-state transformations in low-alloy steel production.

    Mecozzi, MG., Bos, C. & Sietsma, J., 2012, In : Materials Science Forum. 706-709, p. 2782-2787 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Miocrostructural evolution of compacted graphite iron under thermo-mechanical fatigue conditions.

    Ghodrat, S., Janssen, M., Petrov, RH., Kestens, LAI. & Sietsma, J., 2012, In : Advanced Materials Research. 409, p. 757-762 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Novel ultrafine Fe(C) precipitates strengthen transformation-induced-plasticity steel.

    Tirumalasetty, GK., Fang, C., Xu, Q., Jansen, J., Sietsma, J., van Huis, MA. & Zandbergen, HW., 2012, In : Acta Materialia. 60, p. 7160-7168 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Nucleation and growth during the austenite-to-ferrite phase transformation in steels after plastic deformation.

    Sietsma, J., 2012, Phase Transformations in Steels. Volume 1: Fundamentals and diffusion-controlled transformations.. Pereloma, E. & Edmonds, DV. (eds.). Cambridge, United Kingdom: Woodhead Publishing, p. 505-526 656 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  79. Observation of changing crystal orientations during grain coarsening.

    Sharma, H., Huizenga, RM., Bytchkov, A., Sietsma, J. & Offerman, SE., 2012, In : Acta Materialia. 60, p. 229-237 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Phase field simulation of the carbon redistribution during the quenching and partitioning process in a low-carbon steel.

    Takahama, Y., Santofimia Navarro, MJ., Mecozzi, MG., Zhao, L. & Sietsma, J., 2012, In : Acta Materialia. 60, p. 2916-2926 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Phase-field modelling of epitaxial ferrite formation during the production of advanced high-strength steels.

    Mecozzi, MG., Santofimia Navarro, MJ. & Sietsma, J., 2012, Proceedings of the 4th International Conference on Thermomehcanical processing of Steels.. s.n. (ed.). Bristol, United Kingdom: IOM Communications Ltd., p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  82. Study of the combined TWIP/TRIP effect in a high Mn steel during cold rolling.

    Ofei, KA., Zhao, L. & Sietsma, J., 2012, In : Steel Research International. 83, 9999, p. 363-367 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. The production process and potential usage of bronze Geistingen axes.

    Nienhuis, J., Sietsma, J. & Arnoldussen, S., 2012, In : Journal of Archaeology in the Low Countries. 3, p. 47-63 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Ultra-Fast Annealing of High Strength Steel

    Petrov, RH., Hajy Akbary, F., Sidor, J., Santofimia, MJ., Sietsma, J. & Kestens, LAI., 2012, In : International Virtual Journal of Machines, Technologies, Materials, Scientific-technical Union of Mechanical Engineering, Bulgaria, Sofia. 2012, 8, p. 68-71 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Volume change associated to carbon partitioning from martensite to austenite.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2012, In : Materials Science Forum. 706-709, p. 2290-2295 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. 2011
  87. 3D Cellular automata modelling of solid-state transformations relevant in low-alloy steel production.

    Mecozzi, MG., Bos, C. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 1140-1145 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Application of a three-dimensional microstructure evolution model to identify key processing settings for the production of dual-phase steels.

    Bos, C., Mecozzi, MG., Hanlon, DN., Aarnts, MP. & Sietsma, J., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42, p. 3602-3610 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Characterization of NbC and (Nb,Ti)N nanoprecipitates in TRIP assisted multi phase steels¿

    Tirumalasetty, GK., van Huis, MA., Fang, C., Xu, Q., Tichelaar, FD., Hanlon, DN., Sietsma, J. & Zandbergen, HW., 2011, In : Acta Materialia. 59, 19, p. 7406-7415 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation.

    Dmitrieva, O., Ponge, D., Inden, G., Millán, J., Choi, P., Sietsma, J. & Raabe, D., 2011, In : Acta Materialia. 59, p. 364-374 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Effect of strain on the deformation mechanism in austenitic Mn-based TWIP steels.

    van Tol, RT., Zhao, L. & Sietsma, J., 2011, Proceedings of the International Conference on High Manganese Steels HMnS 2011. s.n. (ed.). Seoul, Korea: s.n., p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  92. First-principles and genetic modelling of precipitation sequences in aluminium alloys

    de Jong, M., Dutta, RK., Sluiter, MHF., Miroux, AG., van der Zwaag, S., Sietsma, J. & Rivera Diaz del Castillo, PEJ., 2011, In : Solid State Phenomena. 172-174, p. 285-290 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. In situ synchrotron study on the interplay between martensite formation, texture evolution and load partitioning in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Wright, JP. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 6407-6416 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Mathematical modelling of NbC particle nucleation and growth in an HSLA steel under elastic deformation.

    den Ouden, D., Vermolen, FJ., Zhao, L., Vuik, C. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 893-898 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Microstructural control of the austenite stability in low-alloyed trip steels

    Blonde, RJP., Jimenez, E., van Dijk, NH., Brueck, EH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2011, In : Solid State Phenomena. 172-174, p. 196-201 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel.

    Santofimia Navarro, MJ., Zhao, L., Petrov, RH., Kwakernaak, C., Sloof, WG. & Sietsma, J., 2011, In : Acta Materialia. 59, p. 6059-6068 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Model for the annealing of partial martensite-austenite microstructures in steels.

    Santofimia Navarro, MJ., Speer, JG., Zhao, L. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 567-572 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Modelling of particle nucleation and growth in binary alloys under elastic deformation: An application to a Cu-0.95 wt%Co alloy

    den Ouden, D., Vermolen, FJ., Zhao, L., Vuik, C. & Sietsma, J., 2011, In : Computational Materials Science. 50, 8, p. 2397-2410 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Overview of mechanisms involved during the quenching and partitioning process in steels.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42A, p. 3620-3626 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Poster: A precipitation kinetics model based on the sequential formation of metastable phases in 7xxx aluminium alloys.

    Dutta, RK., Miroux, AG., Rivera Diaz del Castillo, PEJ. & Sietsma, J., 2011.

    Research output: Contribution to conferencePosterProfessional

  101. Poster: Atomic investigations of quenching and partitioning (Q&P) steels.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2011.

    Research output: Contribution to conferencePosterProfessional

  102. Poster: Atomic investigations of quenching and partitioning (W&P) steels.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2011.

    Research output: Contribution to conferencePosterProfessional

  103. Poster: Enigmatic finds from Zevenbergen.

    Nienhuis, J., Sietsma, J. & Dik, J., 2011.

    Research output: Contribution to conferencePosterProfessional

ID: 138382