1. 2016
  2. Quantification of dislocation structures from anelastic deformation behaviour

    Arechabaleta Guenechea, Z., van Liempt, P. & Sietsma, J., 2016, In : Acta Materialia. 115, p. 314–323

    Research output: Contribution to journalArticleScientificpeer-review

  3. Quantitative determination of carbon concentration profiles by GD-OES for the study of decarburization in low-carbon steels

    Duarte Alvarenga, H., van Steenberge, N., Xhoffer, C., Steegstra, P., Sietsma, J. & Terryn, HA., 2016, In : Surface and Interface Analysis. 48, 2, p. 73-81

    Research output: Contribution to journalArticleScientificpeer-review

  4. Rare earth extraction from NdFeB magnets and rare earth oxides using aluminum chloride/fluoride molten salts

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 357-373

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  5. Recycling of metals from urban mines - A strategic evaluation

    Sun, ZHI., Xiao, Y., Agterhuis, H., Sietsma, J. & Yang, Y., 2016, In : Journal of Cleaner Production. 112, Part 4, p. 2977-2987

    Research output: Contribution to journalArticleScientificpeer-review

  6. Semiempirical model for the solubility of rare earth oxides in molten fluorides

    Guo, X., Sun, Z., Sietsma, J. & Yang, Y., 2016, In : Industrial and Engineering Chemistry Research. 55, 16, p. 4773-4781

    Research output: Contribution to journalArticleScientificpeer-review

  7. Thermo-mechanical effects in the formation mechanism of rail squats

    Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2016, Proceedings of the 3rd international conference on railway technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire: Civil-Comp Press, Vol. 110. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Thermodynamic aspects of carbon redistribution during ageing and tempering of Fe–Ni–C alloys

    Kim Lee, B., Sietsma, J. & Santofimia Navarro, M., 2016, In : Philosophical Magazine (London, 2003). 96, 25, p. 2632–2648

    Research output: Contribution to journalArticleScientificpeer-review

  9. Toward sustainability for recovery of critical metals from electronic waste: The hydrochemistry processes

    Sun, Z., Cao, C., Xiao, Y., Sietsma, J., Jin, W., Agterhuis, H. & Yang, Y., 2016, In : ACS Sustainable Chemistry and Engineering. 5, 1, p. 21-40

    Research output: Contribution to journalArticleScientificpeer-review

  10. “Brown etching layer”: A possible new insight into the crack initiation of rolling contact fatigue in rail steels?

    Li, S., Petrov, R., Wu, J., Li, Z., Dollevoet, R. & Sietsma, J., 2016, In : Engineering Failure Analysis. 66, p. 8–18

    Research output: Contribution to journalArticleScientificpeer-review

  11. 2015
  12. A cleaner process for selective recovery of valuable metals from electronic waste of complex mixtures of end-of-life electronic products

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2015, In : Environmental Science & Technology (Washington). 49, 13, p. 7981-7988 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. A mixed-mode model for the ferrite-to-austenite transformation in a ferrite/pearlite microstructure

    Mecozzi, MG., Bos, C. & Sietsma, J., 2015, In : Acta Materialia. 88, p. 302-313

    Research output: Contribution to journalArticleScientificpeer-review

  14. An improved X-ray diffraction analysis method to characterize dislocation density in lath martensitic structures

    Hajy Akbary, F., Sietsma, J., Bottger, AJ. & Santofimia, MJ., 2015, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 639, p. 208-218 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Waste Management. 35, p. 227-235

    Research output: Contribution to journalArticleScientificpeer-review

  16. Computation of the flash-temperature at the wheel-rail contact using a 3D finite element model and its comparison with analytical methods

    Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2015, Proceedings of the 10th international conference on contact mechanics, CM2015. Tournay, H. & Grassie, S. (eds.). Pueblo, USA: Transportation Technology Center - AAR, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Effect of Mn segregation on the microstructure development of quenching and partitioning (Q&P) steel

    Akbary, F. H., Kwakernaak, C., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 1155-1156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Effect of pre-existing martensite on the isothermal transformation kinetics below the Ms temperature in a low-chigh-Si steel

    Navarro-López, A., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 559-560

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Influence of carbide morphology and microstructure on the kinetics of superficial decarburization of C-Mn Steel

    Alvarenga, HD., De Putte, TV., Van Steenberge, N., Sietsma, J. & Terryn, HA., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 1, p. 123-133 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Investigation of bainite formation in a chemically inhomogeneous medium carbon steel

    Goulas, K., Mecozzi, M. G. & Sietsma, J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen et al, L-Q. (ed.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 71-72

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Isothermal transformations in advanced high strength steels below martensite start temperature

    da Silva, EP., de Knijf, D., Xu, W., Föjer, C., Houbaert, Y., Sietsma, J. & Petrov, RH., 2015, In : Materials Science and Technology. 31, 7, p. 808-816

    Research output: Contribution to journalArticleScientificpeer-review

  22. Microstructural evolution during ultrafast heat treament of medium carbon steels

    Papaefthymiou, S., Goulas, K., Cerda, F. C., Sietsma, J. & Petrov, R., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 569-570

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...24 Next

ID: 138382