1. 2015
  2. Molecular dynamics simulation of the effects of FCC/BCC interfaces on the nucleation and growth of martensite in iron

    Ou, X., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 817-824

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Selective copper recovery from complex mixtures of end-of-life electronic products with ammonia-based solution

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Hydrometallurgy. 152, p. 91-99 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Simultaneous electrochemical recovery of rare earth elements and iron from magnet scrap: A theoretical analysis

    Venkatesan, P., Sun, Z., Sietsma, J. & Yang, Y., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Filho, WL. (eds.). Amsterdam, The Netherlands: Elsevier, p. 335-346

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  5. Spinodal decomposition and the carbon solubility in BCC Fe-C

    Kim Lee, B. N., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & G. B. E. A. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 301-302

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Understanding the role of prior austenite grain size in isothermal bainite formation kinetics

    Ravi, A. M., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 643-644

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. 2014
  8. A microstructural study of rolling contact fatigue in rails

    Wu, J., Petrov, RH., Naeimi, M., Li, Z. & Sietsma, J., 2014, Proceedings of the 2nd International Conference on Railway Technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire, UK: Civil-Comp Press, p. 1-18 18 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Combined martensite and bainite formation from austenite decomposition in HSLA steel

    da Silva, EP., Xu, W., Fojer, C., Hoebaert, Y., Sietsma, J. & Petrov, RH., 2014, Proceedings of the 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 682-687 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Dose effects in He implanted Eurofer97 steel (article no. 012019)

    Carvalho Monteiro De Sena Silv, I., Schut, H., Fedorov, A., Luzginova, N., Desgardin, P. & Sietsma, J., 2014, Proceedings13th International Workshop on Slow Positron Beam Techniques and Applications (SLOPOS 2013). Bristol, UK: IOPscience, p. 1-5 5 p. (Journal of Physics: Conference Series; vol. 505).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Elastic strain measurement of miniature tensile specimens

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, In : Experimental Mechanics. 54, 2, p. 165-173 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Electrochemical recovery of rare earth elements from magnet scraps: A theoretical analysis

    Venkatesan, P., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference ERES 2014). Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 163-170 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. In situ thermo-magnetic investigation of the austenitic phase during tempering of a 13Cr6Ni2Mo supermartensitic stainless steel.

    Bojack, A., Zhao, L., Morris, PF. & Sietsma, J., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 13, p. 5956-5967 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. In-situ observation of changing crystal orientations during austenite grain coarsening.

    Sharma, H., Huizenga, RM., Bytchkov, A., Sietsma, J. & Offerman, SE., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, JJ. (eds.). Heidelberg, Germany: Springer, p. 109-129 259 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  15. In-situ synchrotron diffraction studies on transformation strain development in a high strength quenched and tempered structural steel¿part I. Bainitic transformation

    Dutta, RK., Huizenga, RM., Murugaiyan, A., King, A., Gao, H., Hermans, MJM., Sietsma, J. & Richardson, IM., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 1, p. 218-229

    Research output: Contribution to journalArticleScientificpeer-review

  16. In-situ synchrotron difraction studies on the formation, decomposition and stabiisation of austenite in TRIP steels during simulated weld thermal cycles.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Heidelberg, Germany: Springer, p. 71-88

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  17. Influence of the partitioning treatment on the mechanical properties of a 0.3c-1.5si-3.5mn Q&P steel

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, Proceedings 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 224-229 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Kinetics of martensite formation in plain carbon steels: critical assessment of possible influence of austenite grain boundaries and autocatalysis

    van Bohemen, SMC. & Sietsma, J., 2014, In : Materials Science and Technology. 30, 9, p. 1024-1033 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Leaching of rare earth elements: Past and present

    Peelman, S., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 446-456 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Microstructural analysis of martensite constituents in quenching and partitioning steels

    Santofimia Navarro, MJ., Petrov, RH., Zhao, L. & Sietsma, J., 2014, In : Materials Characterization. 92, p. 91-95 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Nonparametric inference in a stereological model with oriented cylinders applied to dual phase steel

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2014, In : The Annals of Applied Statistics. 8, 4, p. 2538-2566 29 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Optimizing mechanical properties of a 0.3C-1.5Si-3.5Mn quenched and partitioned steel.

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, In : Advanced Materials Research. 829, p. 100-104 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 12 3 4 5 6 7 8 9 ...24 Next

ID: 138382