1. 1998
  2. A possible mechanism for atomic transport in amorphous metals.

    van Ee, LD., Thijsse, BJ. & Sietsma, J., 1998, Materials Research Society Symposium Proceedings 1998.. p. 157-162 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  3. Atomic two-level states and relaxations observed in a computer model of amorphous Ni81N19.

    van Ee, LD., Thijsse, BJ. & Sietsma, J., 1998, In : Physica B: Condensed Matter. 57, 2, p. 906-913 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Collectieve atoomsprongen zorgen voor atoomtransport in amorfe metalen.

    van Ee, LD., Sietsma, J. & Thijsse, BJ., 1998, FOM jaarboek. Utrecht, p. 61-62 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

  5. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241-243, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization.

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Ferrite nucleation and growth in steel studied with neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  8. High-frequency permeability of soft-magnetic Fe-Hf-O films with high resistivity.

    Huijbregtse, J., Roozeboom, F., Sietsma, J., Donkers, J., Kuiper, T. & van de Riet, E., 1998, In : Journal of Applied Physics. 83, p. 1569-1574 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Intelligent processing in a hot rolling mill for structural steels.

    van der Wolk, PJ., Dorrepaal, C., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the RTA/AVT Panel workshop 1 on Intelligent Processing of High Performance Materials.. Brussels: AGARD, p. 6.1-6.6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  10. Modelling of an industrial extrusion process.

    Coolegem, G., van der Wolk, PJ., Sietsma, J. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 63 p.

    Research output: Book/ReportReportScientific

  11. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  12. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  13. Phase transformation in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, J., Kop, TA., Sietsma, J. & van der Zwaag, S., 1998, EUROMECH-MECAMAT. 3rd European Mechanics Conference on Mechanics and Multi-Physics Processes in Solids.. Oxford, p. 372-380 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  14. Pressure-induced structural relaxation in amorphous Pd40Ni40P20: the formation volume for diffusion defects.

    Ruitenberg, G., de Hey, P., Sommer, F. & Sietsma, J., 1998, In : Physical Review Letters. 79, 24, p. 4830-4833 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Structural disordening in amorphous Pd40Ni40P20 induced by high temperature deformation.

    de Hey, P., Sietsma, J. & van den Beukel, A., 1998, In : Acta Materialia. 46, 16, p. 5873-5882 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Temperature dependence of diffusion and structural defects in a molecular-dynamics model of amorphous Ni81B19.

    van Ee, LD., Thijsse, BJ. & Sietsma, J., 1998, In : Journal of Non-Crystalline Solids. 232, 1, p. 212-218 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. The effect of geometrical assumptions in modeling solid-state transformation kinetics.

    van Leeuwen, Y., Vooijs, S., Sietsma, J. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2925-2931 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. The effect of the austenisation temperature on the transformation kinetics of an Nb-containing steel.

    Kop, TA., Remijn, PGW., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). San Sebastian, p. 193-200 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, 15, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Volume changes in Fe-Cu and Fe-Co alloys during the austenite to ferrite phase transformatio.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  22. 1999
  23. 3D Neutron depolarization experiments on the gamma/alpha phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, ECNS99 Conference.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Bestudering van de kinetiek van nucleatie- en groeiprocessen tijdens diffusionele transformaties in staal met behulp van neutronendepolarisatie.

    van Dijk, NH., Rekveldt, MT., Sietsma, J., te Velthuis, SGE. & van der Zwaag, S., 1999, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  25. Ferrite growth from austenite in C-Mn steels during continuous cooling.

    Qui, C., Sietsma, J. & van der Zwaag, S., 1999, In : Ironmaking & Steelmaking: processes, products and applications. 26, 3, p. 200-204 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Het ontstaan van de microstructuur van warmgewalst constructiestaal.

    Sietsma, J., 1999, In : Materialen. sept./okt., p. 4-7 4 p.

    Research output: Contribution to journalArticleProfessional

  27. Neutron depolarisation study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Neutron depolarization study of phase transformations in steel.

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Phase transformations in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, Y., Kop, TA., Sietsma, J. & van der Zwaag, S., 1999, In : The European Physical Journal. Special Topics. 9, p. 401-409 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Secrets of steel revealed by neutrons.

    Schrauwers, A., te Velthuis, SGE., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1999, In : Delft Outlook. 1, p. 8-12 5 p.

    Research output: Contribution to journalArticleProfessional

  31. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 5 p.

    Research output: Book/ReportReportProfessional

  32. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 7 p.

    Research output: Book/ReportReportProfessional

  33. 2000
  34. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. A flow stress model for the intercritical deformation of low-carbon steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, Modelling of metal rolling processes 3.. IOM Communications Ltd., p. 268-279 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  37. A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys.

    Wits, JJ., Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 283, p. 234-241 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. A study on the effect of plastic deformation on the austenite-to-ferrite phase transformation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proceedings (2nd version) of J.J. Jonas Symposium on thermomechanical processing of steel.. p. 735-750 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  39. A three-dimensional model for the development of the microstructure in steel during slow cooling

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 2000, 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. A three-dimensional model for the development of the microstructure in steel during slow cooling.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. An investigation of the kinetics of the austenite to ferrite transformation from deformed austenite.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proc. Third International Conference on Modelling of Metal Rolling Processes.. London: Institute of Metals, p. 431-440 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  42. Determination of static softening after hot deformation by double hit compression experiments.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, THERMEC 2000 ¿ Proceedings International Conference on Processing and Manufacturing of Advanced materials.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  43. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 2000, 48, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 48, 5, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Microstructure and texture development during and after intercritical rolling of LC-steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, 41st Mechanical working and steel processing conference proceedings.. Iron & Steel Society, p. 923-934 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  46. Modelling the austenite to ferrite phase transformation in low carbon steels in terms of the interface mobility.

    Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : ISIJ International. 40, 7, p. 713-718 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. On the mobility of the austenite-ferrite interface in Fe-Co and Fe-Cuu.

    Vooijs, S., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 31, p. 379-385 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Phase transformations and microstructural evolution in aluminium-containing TRIP steels.

    Zhao, L., Sietsma, J. & van der Zwaag, S., 2000, Steels and materials for power plants.. Neumann et al., P. (ed.). Weinheim: Wiley-VCH, p. 77-82 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  49. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  50. 2001
  51. Advanced hot rolling practice and products for the production of hot rolled strips.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, . Joint ECSC-Steel NEST workshop advanced hot rolling practice and products.. Düsseldorf, Germany: VDeh, p. 1-3 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  52. Anisotropic dilatation behaviour during transformation of hot rolled steels showing banded structure.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Technology. 17, 12, p. 1569-1574 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Dilatometric analysis of phase transformations in hypo-eutectoid steels.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 36, p. 519-526 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Domain size determination of granular ferromagnetic systems with neutron depolarization

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. vol 89, no, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Domain size determination of granular ferromagnetic systems with neutron depolarization.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. 89, 2, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Effects of nitriding on fatigue strength of quenched and tempered steel: role of interstitial nitrogen.

    Korevaar, BM., Coorens, S., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 17, p. 54-62 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Evaluation of a semiphysical phase transformation model for engineering steels using measured continuous cooling transformation diagrams.

    van der Wolk, PJ., Sietsma, J. & Parker, SV., 2001, In : Materials Science and Technology. 17, p. 127-134 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Flow stress prediction during intercritical deformation of a low-carbon steel with a rule of mixtures and Fe-simulations.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Scripta Metallurgica. 45, p. 875-882 8 p.

    Research output: Contribution to journalArticleScientific

  59. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels.

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. On the influence of aluminium content on the stability of retained austenite in multiphase TRIP-assisted steels.

    Mertens, AIM., Jacques, P., Lazarova, R., Zhao, L., Sietsma, J. & Delannay, F., 2001, In : The European Physical Journal. Special Topics. 11, p. Pr8-223-Pr8-228

    Research output: Contribution to journalArticleScientificpeer-review

  62. On the nature of the bimodal grain size distribution after intercritical deformation of a carbon-manganese steel.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Characterization. 47, p. 1-7 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. On the relation between softening processes and the austenite to ferrite phase transformation in steel.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, Minerals and Materials Society.. p. 215-227 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  64. Some observations on the effect of austenitisation conditions on the transformation kinetics in an HSLA steel and related C-Mn steels.

    Kop, TA., Remijn, PGW., Svetchnikov, V., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 38, p. 1863-1871 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Structural Relaxation and Plastic Flow in Amorphous La50Al25Ni25.

    van Aken, B., de Hey, P. & Sietsma, J., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 278, p. 247-254 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. The austenite to ferrite transformation kinetics of low carbon steels under ultra-fast cooling conditions.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, THERMEC 2000 ¿ Proceedings International Conference on Processing and Manufacturing of Advanced materials.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  67. The effect of plastic deformation of austenite on the kinetics of subsequent ferrite formation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1028-1036 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. The gamma-alpha transformation kinetics of low carbon steels under ultra-fast cooling condition.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientific

  69. 2002
  70. A quantification of the kinetic character of mixed-mode solid-state phase transformations.

    Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  71. Acoustic emission investigations on the ferrite and bainite formation in low-alloy steel during ultra-fast cooling.

    Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  72. Effect of intercritical deformation on the isothermal bainitic transformation in Al-containing TRIP steels.

    Luo, H., Zhao, L., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  73. Ferrite/pearlite band formation in hot rolled medium carbon steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Technology. 18, p. 297-303 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Grain nucleation and growth during phase transformations

    Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2002, In : Science. 298, p. 1003-1005 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. High Temperature SANS Experiments on Nb(C,N) and MnS Precipitates in HSLA Steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S. & Heenan, RK., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, July 2002, p. 1883-1891 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. In situ observations on the austenite stability in TRIP-steel during tensile testing

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Margulies, L., Lauridsen, EM., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002, In : Steel Research International. 73, 6+7, p. 236-241 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. In situ observations on the austenite stability in TRIP-steel during tensile testing

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Margulies, L., Lauridsen, EM., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002, Fundamental Materials Science of the TRIP Phenomenon. BC De Cooman (ed.). Aachen-Mainz: Wissenschaftsverlag Mainz GmbH, p. 25-29 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  78. In-situ high-temperature X-ray diffraction on the g to a transformation in low-carbon steels

    Bodin, A., Woning, L., Sietsma, J. & van der Zwaag, S., 2002, In : ISIJ International. 42, p. 94-99 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. In-situ observations on the mechanical stability of austenite in TRIP steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  80. In-situ observations on the mechanical stability of austenite in TRIP-steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  81. In-situ observations on the mechanical stability of austenite in TRIP-steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  82. Influence of intercritical annealing temperature on the microstructure in a high aluminium TRIP steel

    Zhao, L., Moreno, JJ., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002, TRIP-aided ferrous alloys. BC De Cooman (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 141-146 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  83. Investigation of recovery and recrystallisation processes in C-Mn steel.

    Smith, A., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  84. Magnetic determination of the thermal stability of retained austenite in TRIP steel

    Zhao, L., Tegus, O., Brück, E., van Dijk, NH., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002, Fundamental Materials Science of the TRIP Phenomenon. de Cooman, DC. (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 71-74 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  85. Magnetic determination of the thermal stability of retained austenite in TRIP steel.

    Zhao, L., Tegus, O., Brück, E., van Dijk, NH., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  86. Microstructure development and mechanical behaviour of Al-containing TRIP-steels

    Papaefthymiou, S., Bleck, W., Kruijver, SO., Zhao, L., Sietsma, J. & van der Zwaag, S., 2002, Automative Applications. BC De Cooman (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 341-345 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  87. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part I: Phase regions.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1199-1207 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part II: Microstructure and hardness.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1208-1216 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Neutron depolarization study on the autenite/pearlite phase transformation in steel

    van Wilderen, LJGW., Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S1052-S1054

    Research output: Contribution to journalArticleScientificpeer-review

  90. Quantitative dilatometric analysis of intercritical annealing in a low-silicon TRIP steel

    Zhao, L., Kop, TA., Rolin, V., Sietsma, J., Mertens, AIM., Jacques, PJ. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 1585-1591 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. SANS experiments on Nb(C,N) and MnS precipitates in HSLA steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S978-S980

    Research output: Contribution to journalArticleScientificpeer-review

  92. Texture and microstructure development during intercritical rolling of low-carbon steels

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, p. 1589-1603 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. The influence of nitrogen on the austenite/ferrite interface mobility in Fe-1at.%Si

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 323, p. 403-408 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Thermal and mechanical stability of retained austenite in Al-containing TRIP steels

    Zhao, L., Kruijver, SO., van der Pers, NM., Sietsma, J., Tegus, O., Brück, E., van Dijk, NH. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  95. Thermal and mechanical stability of retained austenite in aluminium-containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2002, In : ISIJ International. 42, 12, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. 2003
  97. A physics-based transformation model for low-carbon steels: from first principles to on-line application

    van Leeuwen, Y., Luinenburg, A. W., Onink, M., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientific

  98. Acoustic emission as a probe of the kinetics of the martensitic transformation in low-alloy steel.

    van Bohemen, SMC., Sietsma, J., Hermans, MJM. & Richardson, IM., 2003, Proc. of The Conference of Metallurgists, COM2003, Vancouver, Canada, August 24-27, 2003.. Militzer, W., Poole, WJ. & Essadiqi, E. (eds.). Vancouver, Canada: COM 2003, p. 125-139 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  99. Acoustic-emission investigations on the austenite decomposition in a medium-carbon steel.

    Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2003, Tranformation and Deformation Mechanisms in Advanced High-Strength Steels.. Militzer, M., Essadiqu, E. & Poole, W. J. (eds.). Vancouver, Canada: COM 2003, p. 109-124 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  100. Analysis of the y - a transformation in a C-Mn steel by dilatometry, laser scanning confocal microscopy and phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2003, EPD 2003 conference in Chicago. Damm, E. B. & Merwin, M. J. (eds.). Chicago, USA: EPD, p. 353-366 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  101. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite Formation and Decomposition. Damm, EB. & Merwin, M. (eds.). Warrendale, USA: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  102. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite and Decomposition. Damm, EB. & Merwin, EB. (eds.). Warrendale: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  103. Cementite dissolution in a bainitic steel.

    Zhao, L., Vermolen, FJ., Peekstok, ER. & Sietsma, J., 2003.

    Research output: Contribution to conferencePosterProfessional

  104. Cluster formation of pearlite colonies during the austenite/pearlite phase transformation in eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, In : Physica B: Condensed Matter. 335, p. 99-103 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  105. Effect of Intercritical deformation on bainite formation in Al-containing TRIP steel

    Luo, H., Zhao, L., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, 8, p. 1219-1227 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  106. Evolving microstructure in pearlitic steel studied by neutron depolarisation

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 56-57 88 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  107. Gas nitriding of chromium in NH3-H2 atmosphere.

    Buijnsters, J. G. ., Shankar, P., Sietsma, J. & ter Meulen, JJ., 2003, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 341, p. 289-295 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  108. Grain Nucleation and Growth during Phase transformations

    Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2003, ESRF Highlights. Cornuéjols, D. & Admans, G. (eds.). Grenoble: ESRF, p. 66-67 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  109. High temperature SANS experiments on Nb(C,N) and Mn5 precipitates in HSLA steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 58-59 88 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  110. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  111. In situ observations of the austenite to ferrite transformation

    van der Zwaag, S., Sietsma, J., Onink, M. & te Velthuis, SGE., 2003, Int. Conf Thermomechanical Processing. E.J. Palmiere, M. Mahfouf & C. Pinna (eds.). Sheffield, p. 193-196 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  112. In situ observations on the mechanical stability of austenite in TRIP steel

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003, In : The European Physical Journal. Special Topics. 104, p. 499-502 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  113. In-situ study of pearlite nucleation and growth during isothermal austenite decomposition in nearly eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 2003, In : Acta Materialia. 51, p. 3927-3938 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  114. Kinetics of the martensitic transformation in low-alloy steel studied by means of acoustic emission.

    van Bohemen, SMC., Sietsma, J., Hermans, MJM. & Richardson, IM., 2003, In : Acta Materialia. 51, p. 4183-4196 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  115. Micromechanical damage simulations of TRIP steels

    Papaefthymiou, S., Bleck, W., Prahl, U., Acht, C., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1355-1360 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  116. Modelling work-hardening of intercritically deformed low-carbon steels using a physical, a statistical, a hybrid and a finite element approach

    Bodin, A., Butler, SA., Burghardt, A., Sietsma, J. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 138-145 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  117. Neutron depolarisation study on the austenite grain size in TRIP steels.

    van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  118. On the influence of aluminium and silicon contents on the kinetics of bainite transformation of intercritical austenite.

    Mertens, AIM., Jacques, PJ., Zhao, L., Kruijver, SO., Sietsma, J. & Delannay, F., 2003, In : The European Physical Journal. Special Topics. 112, p. 305-308 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  119. Physical Simulation of Thermally Induced Martensite Formation from Retained Austenite in TRIP steels

    Zhao, L., Vermolen, FJ., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 19, suppl 1, p. 105-108 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  120. Recovery kinetics in delta-ferrite low carbon steel. A stress relaxation testing technique using Gleeble 3500.

    Zuidwijk, T., Phelan, D., Dippenaar, R., Sietsma, J. & de Jong, B., 2003.

    Research output: Contribution to conferencePosterProfessional

  121. Softening kinetics of deformed C-Mn steel in the intercritical region.

    Luo, H., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  122. Tailoring austenite stability in TRIP-steels.

    Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  123. The influence of carbon diffusion on the character of the gamma-alpha phase transformation in steel

    van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, No. 5, p. 767-773 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  124. The mechanical stability of austenite in TRIP steel observed by 3D X-ray microdiffraction

    Kruijver, SO., Zhao, L., Sietsma, J., Lauridsen, EM., Poulsen, HF., Offerman, SE., van Dijk, NH., Margulies, L., Grigull, S. & van der Zwaag, S., 2003, Transformation and deformation mechanisms in advanced high-strength steels. Militzer, M., Poole, WJ. & Essadiqi (eds.). Vancouver, Canada: Metsoc, p. 223-234 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  125. The tensile stability of austenite in TRIP steel observed by 3D X-ray microdiffraction.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Jargulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  126. Thermal and mechanical stability of retained austenite in aluminium containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2003, In : ISIJ International. 42, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  127. Thermal recovery of amorphous zones in 6H-SiC and 3C-SiC induced by low fluence 420 keV Xe irradiation

    Bus, T., van Veen, A., Shiryaev, A. A., Fedorov, AV., Schut, H., Sietsma, J. & Tichelaar, FD., 2003, In : Materials Science and Engineering B: Advanced Functional Solid-state Materials. B 102, p. 269-276 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  128. 2004
  129. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  130. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  131. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  132. A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 9, p. 2789-2797 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  133. Characteristics of the static recrystallisation kinetics of an intercritically deformed C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 293-298 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  134. Controlling retained austenite stability in TRIP steel

    Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  135. Dilatometric investigations on the decomposition of austenite in two medium-carbon steels with and without Cr and Mo additions

    Mertens, AIM., Brown, A., Zhao, L., McDermid, JR., Sietsma, J. & van der Zwaag, S., 2004, Materials Science & Technology (MS&T) 2004 Conference Proceedings. s.n. (ed.). Wallendale: AIST & TMS, p. 187-198 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  136. Effect of Plastic Deformation on the Austenite - Ferrite Transformation Kinetics in Steel

    van Leeuwen, Y. & Sietsma, J., 2004.

    Research output: Contribution to conferencePosterProfessional

  137. Effect of inhomogeneous deformation on the recrystallization kinetics of deformed metals

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 11, p. 1931-1936 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  138. Evolving microstructures in carbon steel studied by 3DXRD microscopy

    Offerman, SE., Zijden, ACP., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, Evolution of deformation microstructures in 3D. Gundlach, G., Haldrup, K., Hansen, N., Huang, X., Juul Jensen, D., Leffers, T., Li, ZJ., Nielsen, SF., Pantleon, W., Wert, JA. & Winther, G. (eds.). Roskilde: Riso national Laboratory, p. 471-480 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  139. Ferrite nucleation and growth in medium-carbon steel studied by 3DXRD microscopy

    Offerman, SE., Zijden, ACP., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, MS&T conference proceedings. Baker, MA. (ed.). Association for Iron & Steel Technology, p. 227-234 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  140. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2004, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  141. In-situ determination of the ferrite nucleation and growth rates and its relation to the austenite grain size distribution

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004.

    Research output: Contribution to conferenceAbstractScientific

  142. Influence of intercritical deformation on microstructure of TRIP steels containing Al

    Papaefthymiou, S., Bleck, W., Kruijver, SO., Sietsma, J., Zhao, L. & van der Zwaag, S., 2004, In : Materials Science and Technology. 20, p. 201-206 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  143. Influence of multiphase microstructure on the mechanical properties and fracture mechanisms of TRIP steel

    Papaefthymiou, S., Bleck, W., van der Zwaag, S. & Sietsma, J., 2004, Proceedings of the 2nd Hellenic Conference on Metallic Materials. Pantelis, DI. (ed.). Athens: Hellenic Metallurgic Society, p. 51-57 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  144. Investigation of ferrite softening processes in a 0.2 wt% C 1.5 wt% Mn steel after hot deformation.

    Smith, A., Hanlon, DN., Luo, H., Sietsma, J. & van der Zwaag, S., 2004, Solid state transformation and heat treatment. Hazotte, A. (ed.). Lausanne: Wiley-VCH, p. 175-180 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  145. Modelling recovery an recrystallization kinetics after intercritical deformation in 0.19wt% C1.5wt% Mn steel

    Smith, A., Miroux, AG., Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 329-334 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  146. Neutron depolarisation study of the austenite grain size in TRIP steels

    van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2004, In : Physica B: Condensed Matter. 350, p. e463-e466

    Research output: Contribution to journalArticleScientificpeer-review

  147. Observing individual grains during the evolution of the microstructure of steel

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  148. On the Paris exponent and crack closure effect of Alporas aluminum foam.

    Geerlofs, N., Zuidema, J. & Sietsma, J., 2004, Proceedings of The 15th European Conference of Fracture Advanced Fracture Mechanics for Life and Safety Assessments, (ECF15) Stockholm, Sweden.. Nilsson, F. (ed.). Stockholm, Sweden: ECF, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  149. Phase transformations in steel observed by the 3D-XRD microscope at ESRF

    Sietsma, J., Kruijver, SO., Offerman, SE., van Dijk, NH., Zhao, L. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  150. Physical simulation of thermally induced martensite formation from retained austenite in TRIP steels

    Zhao, L., Vermolen, FJ., Sietsma, J. & van der Zwaag, S., 2004, Proceedings of the 4th International Conference on Physical and Numerical Simulation of Materials Processing.. Zhuanqi, H. (ed.). Shanghai: Journal of Materials Science and Technology, p. 105-108 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  151. Recovery Processes in the Ferrite Phase in C-Mn Steel

    Smith, A., Luo, H., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 7, p. 1188-1194 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  152. Recovery and recrystallisation of C-Mn steels in the intercritical region

    Luo, H., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2004, Proceedings of the 4th International Conference on Physical and Numerical Simulation of Materials Processing. Zhuangqi, H. (ed.). Shanghai: Journal of Materials Science and Technology, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  153. Reply to the discussion by Aaronson et al. to "Grain nucleation and growth during phase transformations" by S.E. Offerman et al., Science, 298, 1003 (Nov. 1, 2002)

    Offerman, SE., van Dijk, NH., Sietsma, J., van der Zwaag, S., Lauridsen, EM., Margulies, L., Grigull, S. & Poulsen, HF., 2004, In : Scripta Materialia. 51, p. 937-941 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  154. Solid-state phase transformations involving solute partitioning: modeling and measuring on the level of individual grains

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4757-4766 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  155. The ferrite-to-austenite phase transformation in low-alloy steel.

    Savran, VI., van Leeuwen, Y. & Sietsma, J., 2004.

    Research output: Contribution to conferencePosterProfessional

  156. Time dependence of martensitic transformation in TRIP steels.

    Zhao, L., Mainfroy, B. & Sietsma, J., 2004.

    Research output: Contribution to conferencePosterScientific

  157. 2005
  158. 3DXRD microscopy for the study of solid-state phase transformation kinetics.

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  159. Analysis of acoustic emission signals originating from bainite and martensite formation.

    van Bohemen, SMC., Sietsma, J., Hermans, MJM. & Richardson, IM., 2005, In : Philosophical Magazine (London, 2003). 85, 16, p. 1791-1804 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  160. Analysis of the y - a transformation in a C-Mn steel by phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2005, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 36A, (9), p. 2327-2340 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  161. Dilatometric investigations on the decomposition of austenite in two medium-carbon steels with and without Cr and Mo additions

    Mertens, AIM., Brown, AJ., Zhao, L., McDermid, JR., van der Zwaag, S. & Sietsma, J., 2005, Material Science & Technology 2004. Baker, M. A. (ed.). Warrendale: Association for Iron & Steel Technology, p. 187-198 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  162. Effect of Strain Rate on the Subsequent Softening and Precipitation Kinetics in a Nb-Microalloyed Steel

    Luo, H., Qin, Y., Sietsma, J. & van der Zwaag, S., 2005, In : Steel Research International. 09, 76, p. 650-655 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  163. Fatigue crack initiation and propagation in DP and TRIP steels. (poster 5.1)

    Cheng, X., Janssen, M. & Sietsma, J., 2005.

    Research output: Contribution to conferencePosterProfessional

  164. Healing local instability by transformation.

    Zhao, L., Sietsma, J. & Kestens, LAI., 2005.

    Research output: Contribution to conferencePosterProfessional

  165. In situ x-ray diffraction measurements of deformation-induced austenite to martensite transformation in a multiphase TRIP steel

    Zhao, L., van der Pers, NM., Sietsma, J. & van der Zwaag, S., 2005, In : Materials Science Forum. 500-501, p. 379-386 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  166. Investigation of ferrite softening process in a 0.2 wt% C 1.5 wt% Mn steel after hot deformation

    Smith, A., Hanlon, DN., Luo, H., Sietsma, J. & van der Zwaag, S., 2005, Solid State Transformation and Heat Treatment. s.n. (ed.). Weinheim: Wiley-VCH, p. 175-180 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  167. Low-temperature synchrotron X-ray diffraction studies of TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE. & van der Zwaag, S., 2005.

    Research output: Contribution to conferencePosterProfessional

  168. Modeling nucleation and growth in multiphase steel using recent in-situ observations

    Offerman, SE., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2005, Modellierung und Simulation von Prozessen der Stahlerzeugung und Stahlverarbeitung. R., K. (ed.). Freiberg: TU Bergakademie, p. 97-112 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  169. Modeling of the transformation kinetics of the beta to alpha + beta transformation in Ti-4.5Fe-6.8Mo-1.5Al based on dilatometric results and the morphology of the alpha plates

    van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2005, Modeling and Simulation of Titanium Technology: Theory and Practices. Ellen Cerreta, Vasisht Venkatesh, F. Dax & Jaimie Tiley (eds.). Pittsburgh: TMS Publications, p. 63-77 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  170. Phase field modelling of the interfacial condition at the moving interphase during the y - a transformation in C-Mn steels

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2005, In : Computational Materials Science. 34, 3, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  171. The effect of plastic deformation on the gamma-alpha transformation kinetics in steel.

    van Leeuwen, Y. & Sietsma, J., 2005.

    Research output: Contribution to conferencePosterProfessional

  172. The ferrite-to-austenite phase transformation in low-alloy steel.

    Savran, VI., van Leeuwen, Y. & Sietsma, J., 2005.

    Research output: Contribution to conferencePosterProfessional

  173. The kinetics of isothermal bainite formation in 1%C-1,5% Cr steel.

    Luzginova, NV., Zhao, L., Wauthier, A. & Sietsma, J., 2005, In : Materials Science Forum. 500-501, p. 419-428 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  174. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling

    van Dijk, NH., Butt, AM., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2005, In : Acta Materialia. 53, p. 5439-5447 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  175. Thermal stability of retained austenite in TRIP steels studied by synchrotron radiation X-ray diffraction

    van Dijk, NH., Jimenez-Melero, E., Zhao, L., Sietsma, J. & Offerman, SE., 2005.

    Research output: Contribution to conferencePosterProfessional

  176. Time-dependent martensitic transformation under constant stress in TRIP steels, a novel phenomenon.

    Zhao, L., Mainfroy, B., Janssen, M., Geerlofs, N. & Sietsma, J., 2005.

    Research output: Contribution to conferencePosterProfessional

  177. 2006
  178. A dual-mesh strategy for microstructure development in a macroscopic heat affected zone: Studies on AISI1316L and AISI1005

    Thiessen, RG., Richardson, IM. & Sietsma, J., 2006, Proceedings Trends in Welding Research, Proceedings of the 7th Int. Conference, Pine Mountain, Georgia, USA. David, S. A., DebRoy, T., Lippold, J. C., Smartt, H. B. & Vitek, J. M. (eds.). SL: ASM International, p. 993-1000 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  179. A phase transformation model for the austenitisation of martensite in dual-phase steel

    Thiessen, RG., Sietsma, J. & Richardson, IM., 2006, Thermec 2006, 5th International Conference on Processing and Manufacturing of Advanced Materials, Vancouver, Canada. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Stafa-Zuerich, Switzerland: Trans Tech Publications, p. 4608-4613 6 p. (Materials Science Forum; vol. 539-543).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  180. A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 595-602 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  181. Acoustic emission as a probe of the kinetics of the martensitic transformation in a shape memory alloy

    van Bohemen, SMC., Sietsma, J., Petrov, RH., Hermans, MJM. & Richardson, IM., 2006, In : Materials Transactions. 47, 3, p. 607-611 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  182. Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling.

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 1431-1440 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  183. Analysis of nucleation and interfacial mobility for polygonal ferrite formation using phase field simulations.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2006, TMS Letters, Proceedings of the TMS 2006 Annual Meeting. Thoma, D. (ed.). USA: TMS, p. 15-16 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  184. Austenization of hot and cold-rolled C-Mn steels. Internship report.

    Savran, VI., Bakels, J. G., Colijn, J. & Sietsma, J., 2006, Delft: Technische Universiteit Delft. 34 p.

    Research output: Book/ReportReportProfessional

  185. Cementite dissolution at 860 degrees C in an Fe-Cr-C steel

    Zhao, L., Vermolen, FJ., Wauthier, A. & Sietsma, J., 2006, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 37A, p. 1841-1850 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  186. Evolution of the mixed-mode character of solid-state phase transformations in metals involving solute partitioning.

    Sietsma, J., Mecozzi, MG., van Bohemen, SMC. & van der Zwaag, S., 2006, In : Zeitschrift fuer Metallkunde. 97, 4, p. 356-361 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  187. Experimental observations elucidating the mechanisms of structural bcc-hcp transformations in beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2006, In : Physical Review B (Condensed Matter and Materials Physics). 74, 13, p. 134114-1-13114-10

    Research output: Contribution to journalArticleScientificpeer-review

  188. Kinetics and microstructural evolution during isothermal bainitic transformation.

    Luzginova, NV., Zhao, L. & Sietsma, J., 2006, Vol. 1: Diffusional Transformation.. Howe, JM., Laughlin, DE., Lee, JK., Dahmen, U. & Soffa, WA. (eds.). Warrendale USA: TMS, p. 517-522 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  189. Laser-ultrasonic monitoring of austenite recrystallization in C-MN steel

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2006, In : ISIJ International. 46, 8, p. 1223-1232 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  190. Martensitic transformation of individual grains in multiphase metallic systems

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2006, In : Scripta Materialia.

    Research output: Contribution to journalArticleScientificpeer-review

  191. Modelling the stress relaxation kinetics of intercritically deformed austenite and ferrite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 603-613 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  192. Molecular dynamics simulation of interface dynamics during the fcc-bcc transformation of a martensitic nature.

    Bos, C., Sietsma, J. & Thijsse, BJ., 2006, In : Physical Review B (Condensed Matter and Materials Physics). 73, p. 104117-1-104117-7

    Research output: Contribution to journalArticleScientificpeer-review

  193. Phase transformations in steel studied by 3DXRD-microscopy

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2006, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 246, p. 194-200 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  194. Physically based modelling of phase transformations during welding of low-carbon steel

    Thiessen, RG., Richardson, IM. & Sietsma, J., 2006, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 427, p. 223-231 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  195. Poster: Influence of a trailing heat sink on the microstructure and stress distribution in DP600 welds

    van der Aa, EM., Thiessen, RG., Murugaiyan, A., Hermans, MJM., Sietsma, J. & Richardson, IM., 2006.

    Research output: Contribution to conferencePosterProfessional

  196. Size distribution of retained austenite in phosphorus-containing TRIP steels

    Brück, E., Zhao, L., van Dijk, NH., Peekstok, ER., Tegus, O. & Sietsma, J., 2006, Conference proceedings Thermec 2006. Vancouver, p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  197. The effect of plastic deformation on the austenite-to-ferrite phase transformation in low-alloy steel.

    van Leeuwen, Y. & Sietsma, J., 2006, Vol. 1: Diffusional Transformation.. Howe, JM., Laughlin, DE., Lee, JK., Dahmen, U. & Soffa, WA. (eds.). Warrendale USA: TMS, p. 855-860 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  198. Three-dimensional phase field modelling of the austenite-to-ferrite transformation.

    Militzer, M., Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 3961-3972 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  199. Time-dependent martensitic transformation under constant stress in TRIP-steel, a novel phenomenon?

    Zhao, L., Mainfroy, B., Janssen, M., Geerlofs, N. & Sietsma, J., 2006, Vol. 2. Howe, JM., Laughlin, DE., Lee, JK., Dahmen, U. & Soffa, WA. (eds.). Warrendale USA: TMS, p. 145-150 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  200. Time-dependent strain development under constant stress in TRIP steels

    Zhao, L., Mainfroy, B., Janssen, M., Bakker, A. & Sietsma, J., 2006, In : Scripta Materialia. 55, 4, p. 287-290 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  201. 2007
  202. A mixed-mode model for partitioning phase transformations.

    Bos, C. & Sietsma, J., 2007, In : Scripta Materialia. 57, p. 1085-1088 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  203. A novel 2D analysis method to study individual grains using high-energy X-ray microbeam diffraction

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2007, In : Advances in X-Ray Analysis. 51, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  204. Austenite formation in C35 and C45 alloys.

    Savran, VI., van Leeuwen, Y., Hanlon, DN. & Sietsma, J., 2007, In : Materials Science Forum. 539-543, 5, p. 4637-4642 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  205. Barrier free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel

    van Dijk, NH., Offerman, SE., Sietsma, J. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 4489-4498 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  206. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels.

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 6713-6723 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  207. Evolution and thermal stability of retained austenite in SAE 52100 bainitic steel.

    Luzginova, NV., Zhao, L. & Sietsma, J., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 448, 1-3, p. 104-110 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  208. Experimental observations on the correlation between microstructure and fracture of multiphase steels

    Papaefthymiou, S., Prahl, U., Bleck, W., van der Zwaag, S. & Sietsma, J., 2007, In : International Journal of Materials Research. 97, 12, p. 1723-1731 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  209. Experimental studies into strip casting of steel.

    Phelan, DJ., Zuidwijk, T., Strezov, L., Sietsma, J. & Dippenaar, R., 2007, In : Materials Science Forum. 539-543, p. 4155-4160 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  210. Ferrite formation during slow continuous cooling in steel.

    Offerman, SE., Stranglund, H., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Poulsen, HF., Agren, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 357-362 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  211. Growth of individual austenite grains measured with 3DXRD microscopy.

    Savran, VI., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L. & Sietsma, J., 2007, In : Materials Science Forum. 561-565, p. 2301-2304 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  212. Influence of a trailing heat sink on the microstructure and stress distribution in DP600 welds

    van der Aa, EM., Thiessen, RG., Murugaiyan, A., Hermans, MJM., Sietsma, J. & Richardson, IM., 2007, Mathematical Modelling of Weld Phenomena 8. Cerjak, H., Bhadeshia, H. K. D. H. & Kozeschnik, E. (eds.). Graz, Austria: Verlag der Technischen Universitat Graz, p. 387-408 22 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  213. Laser-ultrasonic monitoring of ferrite recovery in ultra-low carbon steel.

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 458, p. 391-401 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  214. Martensitic transformation of individual grains in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Scripta Materialia. 56, p. 421-424 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  215. Micromechanics-based modelling of properties and failure of multiphase steels.

    Prahl, U., Papaefthymiou, S., Uthaisangsuk, V., Bleck, W., Sietsma, J. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 17-22 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  216. Microstructural features of austenite formation in C35 and C45 alloys.

    Savran, VI., van Leeuwen, Y., Hanlon, DN., Kwakernaak, C., Sloof, WG. & Sietsma, J., 2007, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 38A, p. 946-955 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  217. Modelling of the beta to alpha transformation in a metastable beta Ti alloy based on the kinetics and the morphology of the alpha plates.

    van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2007, In : International Journal of Materials Research. 98, 6, p. 476-484 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  218. Modelling the carbon partitioning during the O&P process in low carbon steels.

    Santofimia, MJ., Zhao, L. & Sietsma, J., 2007, Proceedings STEELSIM 2007. Ludwig, A. (ed.). Leoben, Austria: ASMET, The Austrian Society for Metallurgy and Materials, p. 368-373 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  219. On the nature of the growth of bainitic alpha plates in metastable beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 3684-3689 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  220. Phase-field modelling and synchroton validation of phase transformations in martensitic dual-phase steel

    Thiessen, RG., Sietsma, J., Palmer, TA., Elmer, JW. & Richardson, IM., 2007, In : Acta Materialia. 55, p. 601-614 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  221. Physically-based modelling of microstructure evolution in the HAZ of welded dual-phase steel

    Thiessen, RG., Sietsma, J. & Richardson, IM., 2007, Mathematical Modelling of Weld Phenomena 8. Cerjak, H., Bhadesia, H. K. D. H. & Kozeschnik, E. (eds.). Graz, Austria: Verlag der Technischen Universitat Graz, p. 195-216 22 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  222. Simulation of NbC dissolution in a micro-alloyed low-carbon steel.

    Zhao, L., Javierre Perez, E., Vermolen, FJ. & Sietsma, J., 2007, Proceedings of the International Conference STEELSIM 2007. Ludwig, A. (ed.). Leoben, Austria: ASMET, The Austrian Society for Metallurgy and Materials, p. 374-379 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  223. Size distribution of retained austenite in phosphorous-containing TRIP steels.

    Zhao, L., van Dijk, NH., Peekstok, ER., Tegus, O., Brück, E. & Sietsma, J., 2007, In : Materials Science Forum. 539-543, p. 4321-4326 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  224. Synchrotron study on the martensitic transformation of individual grains

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE. & van der Zwaag, S., 2007.

    Research output: Contribution to conferenceAbstractScientific

  225. The effect of plastic deformation on the formation of different morphologies of ferrite upon cooling.

    van Leeuwen, Y. & Sietsma, J., 2007, In : Materials Science Forum. 539-543, p. 4572-4577 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  226. 2008
  227. 3DXRD characterization and modeling of solid-state transformation processes.

    Juul Jensen, D., Offerman, SE. & Sietsma, J., 2008, In : MRS Bulletin. 33, p. 621-629 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  228. Analysis of the quenching and partitioning (Q&P) process with partial austenitisation in a low-C high-Al steel by phase field modelling.

    Santofimia Navarro, MJ., Takahama, Y., Zhao, L. & Sietsma, J., 2008, Proceedings of the International Conference on New Development on Metallurgy and Applications of High Strength Steels.. s.n. (ed.). Buenos Aires, Argentina: s.n., p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  229. Bainite formation kinetics in high carbon alloyed steel.

    Luzginova, NV., Zhao, L. & Sietsma, J., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 481, 2, p. 766-769 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  230. Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steel.

    Santofimia Navarro, MJ., Zhao, L., Petrov, RH. & Sietsma, J., 2008, In : Materials Characterization. 58, p. 1758-1764 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  231. Experimental evidence for bainite formation below Ms in Fe-0.6C.

    van Bohemen, SMC., Santofimia Navarro, MJ. & Sietsma, J., 2008, In : Scripta Materialia. 58, 6, p. 488-491 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  232. Experimental investigation of two quenched and partitioned low-carbon steels with different silicon content.

    Santofimia Navarro, MJ., Nguyen Minh, T., Zhao, L., Hanlon, DN., Kop, TA. & Sietsma, J., 2008, Proceedings of the International Conference on New Developments in Advanced High-Strength Sheet Steels.. Speer, JG., Nelson, B. & Pradhan, R. (eds.). Warrendale, PA, USA: Association for Iron & Steel Institute, p. 191-198 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  233. Interface conditions during mixed-mode phase transformations in metals.

    Huizenga, RM., Bos, C. & Sietsma, J., 2008, In : Journal of Materials Science. 43, p. 3744-3749 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  234. Mobility analysis of the austenite to ferrite transformation in Nb microalloyed steel by phase field modelling.

    Takahama, Y. & Sietsma, J., 2008, In : ISIJ International. 48, p. 512-517 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  235. Model for the interaction between interface migration and carbon diffusion during annealing of martensite-austenite microstructures in steels.

    Santofimia, MJ., Zhao, L. & Sietsma, J., 2008, In : Scripta Materialia. 59, 2, p. 159-162 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  236. Modeling of isothermal bainite formation based on the nucleation kinetics.

    van Bohemen, SMC. & Sietsma, J., 2008, In : International Journal of Materials Research. 99, p. 739-747 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  237. Nucleation and variant selection of secondary alpha plates in a beta Ti alloy.

    van Bohemen, SMC., Kamp, A., Petrov, RH., Kestens, LAI. & Sietsma, J., 2008, In : Acta Materialia. 56, p. 5907-5914 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  238. Relative influences of aluminium and silicon on the kinetics of bainite formation from intercritical austenite.

    Mertens, AIM., Jacques, PJ., Sietsma, J. & Delannay, F., 2008, In : Steel Research International. 79, p. 954-959 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  239. Reply to comments on "Bainite formation kinetics in high-carbon alloyed steel".

    Luzginova, NV., Zhao, L. & Sietsma, J., 2008, In : Scripta Materialia. 59, p. 1277-1278 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  240. The cementite spheroidization process in high-carbon steels with different chromium contents.

    Luzginova, NV., Zhao, L. & Sietsma, J., 2008, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 39A, p. 513-521 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  241. The role of nucleation behaviour in phase field simulations of the austenite to ferrite transformation.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2008, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 39A, p. 1237-1247 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  242. 2009
  243. A coupled thermal-mechanical FE model of flow localization during the hot torsion test.

    Mirzakhani, B., Khoddam, S., Arabi, H., Salehi, MT. & Sietsma, J., 2009, In : Steel Research International. 80, p. 846-854 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  244. Application of the maximum driving force concept for solid-state partitioning phase transformations in multi-component systems.

    Bos, C. & Sietsma, J., 2009, In : Acta Materialia. 57, p. 136-144 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  245. Effect of composition on kinetics of athermal martensite formation in plain carbon steels.

    van Bohemen, SMC. & Sietsma, J., 2009, In : Materials Science and Technology. 25, p. 1009-1012 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  246. Influence of interface mobility on the evolution of austenite-martensite grain assemblies during annealing.

    Santofimia Navarro, MJ., Speer, JG., Clarke, AJ., Zhao, L. & Sietsma, J., 2009, In : Acta Materialia. 57, p. 4548-4557 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  247. Martensite formation in fully and partially austenitic plain carbon steels.

    van Bohemen, SMC. & Sietsma, J., 2009, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 40A, p. 1059-1068 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  248. Microstructural evolution of a low-carbon steel during application of quenching and partitioning heat treatments after partial austenitzation.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2009, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 40, 1, p. 46-57 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  249. Retention of austenite in the welded microstructure of a 0.16C-1.6Mn-1.5Si (wt.%) TRIP steel.

    Zhao, L., Wibowo, MK., Hermans, MJM., van Bohemen, SMC. & Sietsma, J., 2009, In : Journal of Materials Processing Technology. 209, p. 5286-5292 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  250. The effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 5, p. 533-543 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  251. The effect of tensile loading on the time-dependent strain development in low-alloy TRIP-steel

    Citrawati, F., Zhao, L. & Sietsma, J., 2009, Proceedings of the 11th International Conference on Quality in Research. Halim, A. (ed.). Depok, Indonesia: University of Indonesia, p. 870-877 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  252. 2010
  253. A microstructure model for recrystallisation and phase transformation during the dual-phase steel annealing cycle.

    Bos, C., Mecozzi, MG. & Sietsma, J., 2010, In : Computational Materials Science. 48, p. 692-699 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  254. An ageing model for Al-Mg-Si alloys assuming the needle-shaped morphology for precipitates.

    Bahrami, A., Miroux, AG. & Sietsma, J., 2010, Proceedings of the 12th International Conference on Aluminium Alloys. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Tokyo, Japan: The Japan institute of Light Metals, p. 401-406 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  255. Atomic scale simulation of magnesium single crystals.

    Phelan, DJ., Stanford, N., Thijsse, BJ. & Sietsma, J., 2010, In : Materials Science Forum. 638-642, p. 1585-1590 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  256. Austenite nucleation and growth observed on the level of individual grains by three-dimensional X-ray diffraction microscopy.

    Savran, VI., Offerman, SE. & Sietsma, J., 2010, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 41A, p. 583-591 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  257. Experimental study of the distribution of alloying elements after the formation of epitaxial ferrite upon cooling in a low-carbon steel

    Santofimia Navarro, MJ., Kwakernaak, C., Sloof, WG., Zhao, L. & Sietsma, J., 2010, In : Materials Characterization. 61, p. 937-942 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  258. In situ phase transformation studies on a transformation induced plasticity steel under simulated weld thermal cycles using synchrotron diffraction

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2010, In-situ Studies with Photons, Neutrons and Electrons. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, JA. (eds.). Berlin Heidelberg: Springer, p. 133-148 204 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  259. New low carbon Q&P steels containing film-like intercritical ferrite.

    Santofimia Navarro, MJ., Nguyen Minh, T., Zhao, L., Petrov, RH., Sabirov, I. & Sietsma, J., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 527, p. 6429-6439 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  260. Poster: Magnetic determination of retained austenite in advanced steels.

    Bojack, A., Zhao, L. & Sietsma, J., 2010.

    Research output: Contribution to conferencePosterProfessional

  261. Poster: Model for the annealing of partial martensite-austenite microstructures in steels.

    Santofimia Navarro, MJ., Speer, JG., Zhao, L. & Sietsma, J., 2010.

    Research output: Contribution to conferencePosterProfessional

  262. Poster: Theoretical design of quenching and partitioning (Q&P) steels.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2010.

    Research output: Contribution to conferencePosterProfessional

  263. Revealing complex microstructures by 3D analysis.

    Sharma, H., van Bohemen, SMC., Petrov, RH. & Sietsma, J., 2010, Proceedings of the 31st Risø International Symposium on Materials Science: Challenges in Materials Science and Possibilities in 3D and 4D Characterization Techniques.. Hansen, N., Juul Jensen, D., Nielsen, SF., Poulsen, HF. & Ralph, B. (eds.). Roskilde, Denmark: Technical University of Denmark, p. 421-428 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  264. Temperature development during step-wise tensile tests on TRIP steel.

    Zhao, L., Thomser, C., Schneider, K., Bleck, W. & Sietsma, J., 2010, In : Materials Science Forum. 638-642, p. 3579-3584 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  265. The complexity of the microstructural changes during the partitioning step of the quenching and partitioning process in low carbon steels.

    Santofimia Navarro, MJ., Zhao, L., Takahama, Y. & Sietsma, J., 2010, In : Materials Science Forum. 638-642, p. 3485-3490 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  266. The formation of multiphase microstructures in low-alloy steel.

    Sietsma, J., 2010, In : Materials Science Forum. 638-642, p. 3520-3530 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  267. The kinetics of bainite and martensite formation in steels during cooling.

    van Bohemen, SMC. & Sietsma, J., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A527, p. 6672-6676 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  268. Three-dimensional analysis of microstructures in titanium.

    Sharma, H., van Bohemen, SMC., Petrov, RH. & Sietsma, J., 2010, In : Acta Materialia. 58, p. 2399-2407 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  269. 2011
  270. 3D Cellular automata modelling of solid-state transformations relevant in low-alloy steel production.

    Mecozzi, MG., Bos, C. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 1140-1145 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  271. Application of a three-dimensional microstructure evolution model to identify key processing settings for the production of dual-phase steels.

    Bos, C., Mecozzi, MG., Hanlon, DN., Aarnts, MP. & Sietsma, J., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42, p. 3602-3610 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  272. Characterization of NbC and (Nb,Ti)N nanoprecipitates in TRIP assisted multi phase steels¿

    Tirumalasetty, GK., van Huis, MA., Fang, C., Xu, Q., Tichelaar, FD., Hanlon, DN., Sietsma, J. & Zandbergen, HW., 2011, In : Acta Materialia. 59, 19, p. 7406-7415 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  273. Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation.

    Dmitrieva, O., Ponge, D., Inden, G., Millán, J., Choi, P., Sietsma, J. & Raabe, D., 2011, In : Acta Materialia. 59, p. 364-374 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  274. Effect of strain on the deformation mechanism in austenitic Mn-based TWIP steels.

    van Tol, RT., Zhao, L. & Sietsma, J., 2011, Proceedings of the International Conference on High Manganese Steels HMnS 2011. s.n. (ed.). Seoul, Korea: s.n., p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  275. First-principles and genetic modelling of precipitation sequences in aluminium alloys

    de Jong, M., Dutta, RK., Sluiter, MHF., Miroux, AG., van der Zwaag, S., Sietsma, J. & Rivera Diaz del Castillo, PEJ., 2011, In : Solid State Phenomena. 172-174, p. 285-290 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  276. In situ synchrotron study on the interplay between martensite formation, texture evolution and load partitioning in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Wright, JP. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 6407-6416 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  277. Mathematical modelling of NbC particle nucleation and growth in an HSLA steel under elastic deformation.

    den Ouden, D., Vermolen, FJ., Zhao, L., Vuik, C. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 893-898 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  278. Microstructural control of the austenite stability in low-alloyed trip steels

    Blonde, RJP., Jimenez, E., van Dijk, NH., Brueck, EH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2011, In : Solid State Phenomena. 172-174, p. 196-201 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  279. Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel.

    Santofimia Navarro, MJ., Zhao, L., Petrov, RH., Kwakernaak, C., Sloof, WG. & Sietsma, J., 2011, In : Acta Materialia. 59, p. 6059-6068 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  280. Model for the annealing of partial martensite-austenite microstructures in steels.

    Santofimia Navarro, MJ., Speer, JG., Zhao, L. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 567-572 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  281. Modelling of particle nucleation and growth in binary alloys under elastic deformation: An application to a Cu-0.95 wt%Co alloy

    den Ouden, D., Vermolen, FJ., Zhao, L., Vuik, C. & Sietsma, J., 2011, In : Computational Materials Science. 50, 8, p. 2397-2410 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  282. Overview of mechanisms involved during the quenching and partitioning process in steels.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42A, p. 3620-3626 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  283. Poster: A precipitation kinetics model based on the sequential formation of metastable phases in 7xxx aluminium alloys.

    Dutta, RK., Miroux, AG., Rivera Diaz del Castillo, PEJ. & Sietsma, J., 2011.

    Research output: Contribution to conferencePosterProfessional

  284. Poster: Atomic investigations of quenching and partitioning (Q&P) steels.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2011.

    Research output: Contribution to conferencePosterProfessional

  285. Poster: Atomic investigations of quenching and partitioning (W&P) steels.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2011.

    Research output: Contribution to conferencePosterProfessional

  286. Poster: Enigmatic finds from Zevenbergen.

    Nienhuis, J., Sietsma, J. & Dik, J., 2011.

    Research output: Contribution to conferencePosterProfessional

  287. Poster: Quantification and modeling of microstructural banding in steel from serial sectioned optical microscopy.

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2011.

    Research output: Contribution to conferencePosterProfessional

  288. Poster: Quantification and modeling of microstructural banding in steel from serial sectioned optical microscopy.

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2011.

    Research output: Contribution to conferencePosterProfessional

  289. Quantitative comparison of the phase-transformation kinetics in a sharp-interface and a phase-field model.

    Mecozzi, MG., Eiken, J., Apel, M. & Sietsma, J., 2011, In : Computational Materials Science. 50, p. 1846-1853 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  290. Simulation of ferrite formation in Fe-C alloys based on a thee-dimensional mixed-mode transformation model.

    van Bohemen, SMC., Bos, C. & Sietsma, J., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42A, p. 2609-2618 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  291. The effect of NbC precipitates on the phase transformation kinetics in high-purity Fe-C-Mn-Nb alloys.

    Dere, EG., Sharma, H., Offerman, SE. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 499-504 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  292. Thermodynamic analysis of the effect of compositional inhomogeneity on phase transformations in a 13Cr6Ni2Mo supermartensitic stainless steel.

    Bojack, A., Zhao, L. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 899-904 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  293. 2012
  294. Alpha'-martensite formation in deep-drawn Mn-based TWIP steel.

    van Tol, RT., Kim, JK., Zhao, L., Sietsma, J. & De Cooman, BC., 2012, In : Journal of Materials Science. 47, p. 4845-4850 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  295. An age-hardening model for Al-Mg-Si alloys considering needle-shaped precipitates.

    Bahrami, A., Miroux, AG. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 43, 11, p. 4445-4453 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  296. Carbon redistribution in a quenched and partitioned steel analysed by atom probe tomography.

    Santofimia Navarro, MJ., Zhao, L., Povstugar, I., Choi, P-P., Raabe, D. & Sietsma, J., 2012, Proceedings 3rd International Sympsium on Steel Science - Nanoscale Inhomogeneity in Steels ¿ Fundamentals and effects on microstructures and properties. Furuhara, T., Numakura, H. & Ushioda, K. (eds.). Tokyo, Japan: ISIJ, p. 155-158 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  297. Characterisation and quantification of microstructural banding in dual phase steels Part 1 - General 2D study

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2012, In : Materials Science and Technology. 28, 8, p. 895-902 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  298. Characterisation and quantification of microstructural banding in dual-phase steels Part 2 - case study extending to 3D

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2012, In : Materials Science and Technology. 28, 8, p. 903-910 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  299. Combining bainite and martenste in steel microstructures for light-weight applications.

    Santofimia Navarro, MJ., van Bohemen, SMC. & Sietsma, J., 2012, Symposium Series S73, Ferrous and Base Metals Development. s.n. (ed.). Magaliesburg, South Africa: The Southern African institute of Mining and Metallurgy, p. 205-216 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  300. Deformation induced austenite grain rotation and transformation in TRIP assisted steel

    Tirumalasetty, GK., van Huis, MA., Kwakernaak, C., Sietsma, J., Sloof, WG. & Zandbergen, HW., 2012, In : Acta Materialia. 60, p. 1311-1321 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  301. Dislocation annihiliation in plastic deformation: II. Kocks-Mecking analysis.

    Galindo Nava, EI., Sietsma, J. & Rivera Diaz del Castillo, PEJ., 2012, In : Acta Materialia. 60, p. 2615-2624 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  302. Effects of holding time on thermo-mechanical fatigue properties of compacted graphite iron through tests with notched specimens

    Ghodrat, S., Riemslag, AC., Kestens, LAI., Petrov, RH., Janssen, M. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 5, p. 2121-2130 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  303. Employing mathematical and physical concepts to build 3D microstructure models on the basis of well-accessible 2D experiments.

    McGarrity, KS., Jongbloed, G. & Sietsma, J., 2012, Delft, The Netherlands: Delft University of Technology. 8 p.

    Research output: Book/ReportReportProfessional

  304. Experimental investigation of structural defects in deep-drawn austenitic Mn-based TWIP steel.

    van Tol, RT., Zhao, L., Schut, H. & Sietsma, J., 2012, In : Materials Science and Technology. 28, 3, p. 348-352 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  305. In situ determination of austenite and martensite formation in 13Cr6Ni2Mo supermartensitic stainless steel.

    Bojack, A., Zhao, L., Morris, PF. & Sietsma, J., 2012, In : Materials Characterization. 71, p. 77-86 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  306. In-situ synchrotron diffraction studies on the formation, stabilisation and decomposition of austenite in trip steels during simulated weld thermal cycles

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2012, Proceedings of the Visual-JW2012. s.n. (ed.). s.l.: s.n., p. 1-2 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  307. Investigation of deformation mechanisms in deep-drawn and tensile-strained austenitic Mn-based TWIP steel.

    van Tol, RT., Zhao, L., Schut, H. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 43, 9, p. 3070-3077 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  308. Microstructural features of oxidation induces volume change of compacted graphite iron at elevated temperature annealing

    Ghodrat, S., Janssen, M., Kestens, LAI. & Sietsma, J., 2012, In : Oxidation of Metals. 79, 3/4

    Research output: Contribution to journalArticleScientificpeer-review

  309. Microstructure controlled thermo-mechanical fatigue of compacted graphite iron for engine blocks.

    Ghodrat, S., Janssen, M., Sietsma, J., Petrov, RH. & Kestens, LAI., 2012, Delft: Delft University of Technology. 14 p.

    Research output: Book/ReportReportProfessional

  310. Microstructure modelling of solid-state transformations in low-alloy steel production.

    Mecozzi, MG., Bos, C. & Sietsma, J., 2012, In : Materials Science Forum. 706-709, p. 2782-2787 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  311. Miocrostructural evolution of compacted graphite iron under thermo-mechanical fatigue conditions.

    Ghodrat, S., Janssen, M., Petrov, RH., Kestens, LAI. & Sietsma, J., 2012, In : Advanced Materials Research. 409, p. 757-762 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  312. Novel ultrafine Fe(C) precipitates strengthen transformation-induced-plasticity steel.

    Tirumalasetty, GK., Fang, C., Xu, Q., Jansen, J., Sietsma, J., van Huis, MA. & Zandbergen, HW., 2012, In : Acta Materialia. 60, p. 7160-7168 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  313. Nucleation and growth during the austenite-to-ferrite phase transformation in steels after plastic deformation.

    Sietsma, J., 2012, Phase Transformations in Steels. Volume 1: Fundamentals and diffusion-controlled transformations.. Pereloma, E. & Edmonds, DV. (eds.). Cambridge, United Kingdom: Woodhead Publishing, p. 505-526 656 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  314. Observation of changing crystal orientations during grain coarsening.

    Sharma, H., Huizenga, RM., Bytchkov, A., Sietsma, J. & Offerman, SE., 2012, In : Acta Materialia. 60, p. 229-237 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  315. Phase field simulation of the carbon redistribution during the quenching and partitioning process in a low-carbon steel.

    Takahama, Y., Santofimia Navarro, MJ., Mecozzi, MG., Zhao, L. & Sietsma, J., 2012, In : Acta Materialia. 60, p. 2916-2926 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  316. Phase-field modelling of epitaxial ferrite formation during the production of advanced high-strength steels.

    Mecozzi, MG., Santofimia Navarro, MJ. & Sietsma, J., 2012, Proceedings of the 4th International Conference on Thermomehcanical processing of Steels.. s.n. (ed.). Bristol, United Kingdom: IOM Communications Ltd., p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  317. Study of the combined TWIP/TRIP effect in a high Mn steel during cold rolling.

    Ofei, KA., Zhao, L. & Sietsma, J., 2012, In : Steel Research International. 83, 9999, p. 363-367 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  318. The production process and potential usage of bronze Geistingen axes.

    Nienhuis, J., Sietsma, J. & Arnoldussen, S., 2012, In : Journal of Archaeology in the Low Countries. 3, p. 47-63 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  319. Ultra-Fast Annealing of High Strength Steel

    Petrov, RH., Hajy Akbary, F., Sidor, J., Santofimia, MJ., Sietsma, J. & Kestens, LAI., 2012, In : International Virtual Journal of Machines, Technologies, Materials, Scientific-technical Union of Mechanical Engineering, Bulgaria, Sofia. 2012, 8, p. 68-71 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  320. Volume change associated to carbon partitioning from martensite to austenite.

    Santofimia Navarro, MJ., Zhao, L. & Sietsma, J., 2012, In : Materials Science Forum. 706-709, p. 2290-2295 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  321. 2013
  322. Ageing in retained austenite containing steels

    Amirthalingam, M., Bojack, A., Zhao, L., Hermans, MJM., Sietsma, J. & Richardson, IM., 2013.

    Research output: Contribution to conferencePosterProfessional

  323. Application of the level-set method to a mixed-mode driven Stefan problem in 2D and 3D

    den Ouden, D., Segal, A., Vermolen, FJ., Zhao, L., Vuik, C. & Sietsma, J., 2013, In : Computing. 95, 1, p. 553-572 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  324. Bronze studs: colouring, reconstruction and conservation

    Nienhuis, J., Sietsma, J., Fontijn, D., Joosten, I. & Dik, J., 2013, Transformation through Destruction. A monumental and extraordinary early Iron Age Hallstatt C barrow from the ritual landscape of Oss-Zevenbergen. Fontijn, D., van der Vaart, S. & Jansen, R. (eds.). Leiden, The Netherlands: Sidestone Press, p. 213-237 348 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  325. Combining bainite and martensite in steel microstructures for light-weight applications.

    Santofimia Navarro, MJ., van Bohemen, SMC. & Sietsma, J., 2013, Ferrous and Base Metals Development - Proceedings FERROUS 2012. Johannesburg, South Africa: South African Institute of Mining and Metallurgy, p. 205-216 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  326. Effect of niobium and grain boundary density on the fire resistance of Fe-C-Mn steel.

    Dere, EG., Sharma, H., Petrov, RH., Sietsma, J. & Offerman, SE., 2013, In : Scripta Materialia. 68, p. 651-654 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  327. Formation of (Fe,Cr) carbides and dislocation structures in low-chromium steel studied in situ using synchrotron radiation.

    Dere, EG., Sharma, H., Huizenga, RM., Portale, G., Bras, W., Bliznuk, V., Sietsma, J. & Offerman, SE., 2013, In : Journal of Applied Crystallography. 46, p. 181-192 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  328. Helium implanted Eurofer97 characterized by positron beam Doppler broadening and Thermal Desorption Spectroscopy

    Carvalho Monteiro De Sena Silv, I., Schut, H., Fedorov, A., Luzginova, N., Desgardin, P. & Sietsma, J., 2013, In : Journal of Nuclear Materials. 442, 1 - 3, p. 377-381 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  329. Helium implanted RAFM steels studied by positron beam Doppler broadening and thermal desorption spectroscopy

    Carvalho Monteiro De Sena Silv, I., Schut, H., Fedorov, A., Luzginova, N., Desgardin, P. & Sietsma, J., 2013, Proceedings 16th International Conference on Positron Annihilation. Coleman, P., Alam, A., Dugdale, S. & Roussenova, M. (eds.). Bristol: IOP Publishing, p. 1-4 4 p. (Journal of Physics: Conference Series; vol. 443).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  330. Hydrometallurgical recovery of copper from complex mixtures of end-of-life shredded ICT products

    Xiao, Y., Yang, Y., van den Berg, JAM., Sietsma, J., Agterhuis, H., de Visser, G. & Bol, D., 2013, In : Hydrometallurgy. 140, p. 128-134 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  331. Influence of martensite tempering on the mechanical properties of a 0.3C-1.5Si-3.5Mn Q&P steel

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2013.

    Research output: Contribution to conferencePosterProfessional

  332. Investigation of the delayed fracture phenomenon in deep-drawn austenitic manganese-based twinning-induced plasticity steels.

    van Tol, RT., Zhao, L., Bracke, L., Kömmelt, P. & Sietsma, J., 2013, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44A, p. 4654-4660 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  333. Kinetics of austenite decomposition in manganese-based steel

    van Tol, RT., Zhao, L. & Sietsma, J., 2013, In : Acta Materialia. 64, 2014, p. 33-40 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  334. Magnetic detection of small fractions of ferromagnetic martensite within the paramagnetic austenite matrix of TWIP steel.

    Zhao, L., van Dijk, NH., Lefering, AJE. & Sietsma, J., 2013, In : Journal of Materials Science. 48, p. 1474-1479 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  335. Measurement and characterization of thermo-mechanical fatigue in compacted graphite iron.

    Ghodrat, S., Riemslag, AC., Janssen, M., Sietsma, J. & Kestens, LAI., 2013, In : International Journal of Fatigue. 48, p. 319-329 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  336. Microstructural development and deformation mechanisms during cold rolling of a medium stacking fault energy TWIP steel.

    Ofei, KA., Zhao, L. & Sietsma, J., 2013, In : Materials Science and Technology. 29, 2, p. 161-167 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  337. Microstructure and properties of ultrafast annealed high strength steels.

    Petrov, RH., Hajy Akbary, F., Saz, FR., Sidor, J., Santofimia Navarro, MJ., Sietsma, J. & Kestens, LAI., 2013, In : Materials Science Forum. 753, p. 554-558 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  338. Microstructure, tensile and toughness properties after quenching and partitioning treatments of a medium-carbon steel.

    Paravicini Bagliani, E., Santofimia Navarro, MJ., Zhao, L., Sietsma, J. & Anelli, E., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 559, p. 486-495 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  339. Modeling of strain hardening in the aluminium alloy AA6061.

    Bahrami, A., Miroux, AG. & Sietsma, J., 2013, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 5, p. 2409-2417 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  340. Modelling precipitate nucleation and growth with multiple precipitate species under isothermal conditions: Formulation and analysis.

    den Ouden, D., Zhao, L., Vuik, C., Sietsma, J. & Vermolen, FJ., 2013, In : Computational Materials Science. 79, p. 933-943 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  341. Perspectives in high strength steels: interactions between non-equilibrium phases

    Santofimia Navarro, MJ., Hanlon, DN., Sietsma, J. & van Bohemen, SMC., 2013, Proceedings of the 2013 International Symposium on New Developments in Advanced High-Strength Sheet Steels.. Hickey, KD. & Ashburn, RE. (eds.). Warrendale, PA, USA: Association for Iron & Steel Technology, p. 331-339 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  342. Physical modelling the microstructure formation in advanced high-strength steels

    Sietsma, J., 2013, In : Materials Science Forum. 762, p. 194-209 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  343. Poster: Storytelling: white layers on bronze.

    Nienhuis, J., Sietsma, J., Fontijn, D., Joosten, I., Dik, J. & Mol, JMC., 2013.

    Research output: Contribution to conferencePosterProfessional

  344. Toward a recrystallized microstructure in extruded AA6005A alloy

    Bahrami, A., den Bakker, AJ., Miroux, AG. & Sietsma, J., 2013, Light Metals 2013- Proceedings 142nd Annual Meeting & Exhibition. Sadler, BA. (ed.). Hoboken, NJ, USA: John Wiley & Sons, p. 347-350 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  345. Volume expansion of compacted graphite iron induced by pearlite decomposition and the effect of oxidation at elevated temperature.

    Ghodrat, S., Janssen, M., Kestens, LAI. & Sietsma, J., 2013, In : Oxidation of Metals. 80, 1-2, p. 161-176 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  346. 2014
  347. A microstructural study of rolling contact fatigue in rails

    Wu, J., Petrov, RH., Naeimi, M., Li, Z. & Sietsma, J., 2014, Proceedings of the 2nd International Conference on Railway Technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire, UK: Civil-Comp Press, p. 1-18 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  348. Combined martensite and bainite formation from austenite decomposition in HSLA steel

    da Silva, EP., Xu, W., Fojer, C., Hoebaert, Y., Sietsma, J. & Petrov, RH., 2014, Proceedings of the 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 682-687 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  349. Dose effects in He implanted Eurofer97 steel (article no. 012019)

    Carvalho Monteiro De Sena Silv, I., Schut, H., Fedorov, A., Luzginova, N., Desgardin, P. & Sietsma, J., 2014, Proceedings13th International Workshop on Slow Positron Beam Techniques and Applications (SLOPOS 2013). Bristol, UK: IOPscience, p. 1-5 5 p. (Journal of Physics: Conference Series; vol. 505).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  350. Elastic strain measurement of miniature tensile specimens

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, In : Experimental Mechanics. 54, 2, p. 165-173 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  351. Electrochemical recovery of rare earth elements from magnet scraps: A theoretical analysis

    Venkatesan, P., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference ERES 2014). Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 163-170 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  352. In situ thermo-magnetic investigation of the austenitic phase during tempering of a 13Cr6Ni2Mo supermartensitic stainless steel.

    Bojack, A., Zhao, L., Morris, PF. & Sietsma, J., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 13, p. 5956-5967 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  353. In-situ observation of changing crystal orientations during austenite grain coarsening.

    Sharma, H., Huizenga, RM., Bytchkov, A., Sietsma, J. & Offerman, SE., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, JJ. (eds.). Heidelberg, Germany: Springer, p. 109-129 259 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  354. In-situ synchrotron diffraction studies on transformation strain development in a high strength quenched and tempered structural steel¿part I. Bainitic transformation

    Dutta, RK., Huizenga, RM., Murugaiyan, A., King, A., Gao, H., Hermans, MJM., Sietsma, J. & Richardson, IM., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 1, p. 218-229

    Research output: Contribution to journalArticleScientificpeer-review

  355. In-situ synchrotron difraction studies on the formation, decomposition and stabiisation of austenite in TRIP steels during simulated weld thermal cycles.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Heidelberg, Germany: Springer, p. 71-88

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  356. Influence of the partitioning treatment on the mechanical properties of a 0.3c-1.5si-3.5mn Q&P steel

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, Proceedings 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Durnten-Zurich, Switzerland: Trans Tech Publications, p. 224-229 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  357. Kinetics of martensite formation in plain carbon steels: critical assessment of possible influence of austenite grain boundaries and autocatalysis

    van Bohemen, SMC. & Sietsma, J., 2014, In : Materials Science and Technology. 30, 9, p. 1024-1033 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  358. Leaching of rare earth elements: Past and present

    Peelman, S., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 446-456 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  359. Microstructural analysis of martensite constituents in quenching and partitioning steels

    Santofimia Navarro, MJ., Petrov, RH., Zhao, L. & Sietsma, J., 2014, In : Materials Characterization. 92, p. 91-95 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  360. Nonparametric inference in a stereological model with oriented cylinders applied to dual phase steel

    McGarrity, KS., Sietsma, J. & Jongbloed, G., 2014, In : The Annals of Applied Statistics. 8, 4, p. 2538-2566 29 p.

    Research output: Contribution to journalArticleScientificpeer-review

  361. Optimizing mechanical properties of a 0.3C-1.5Si-3.5Mn quenched and partitioned steel.

    Hajy Akbary, F., Santofimia Navarro, MJ. & Sietsma, J., 2014, In : Advanced Materials Research. 829, p. 100-104 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  362. Phase transformations during the decomposition of austenite below Ms in a low-carbon steel

    Pinto da Silva, E., Xu, W., Föjer, C., Houbaert, Y., Sietsma, J. & Petrov, RH., 2014, In : Materials Characterization. 95, p. 85-93 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  363. Rare earth extraction from NdFeB magnet and rare earth oxides using molten salt processes

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 178-189 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  364. Recovery of valuable metals from mixture of end-of-life electronic products - a hydrometallurgy path.

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., de Visser, G. & Yang, Y., 2014, Proceedings of Going Green Care Innovation Conference 2014. Vienna, Austria: Austrian Society for Systems Engineering and Automation, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  365. Solubility of rare earth oxides in molten fluorides

    Guo, X., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 149-155 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  366. Strategic evaluations on electronic wastes for metal recycling.

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., de Visser, G. & Yang, Y., 2014.

    Research output: Contribution to conferencePosterProfessional

  367. Structural tale of two novel (Cr, Mn)C carbides in steel

    Tirumalasetty, GK., Fang, CM., Jansen, J., Yokosawa, T., Boeije, MFJ., Sietsma, J., van Huis, MA. & Zandbergen, HW., 2014, In : Acta Materialia. 78, p. 161-172 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  368. Substantial fatigue similarity of a new small-scale test rig to actual wheel-rail system

    Naeimi, M., Li, Z., Petrov, RH., Dollevoet, RPBJ., Sietsma, J. & Wu, J., 2014, Proceedings of the International Conference on Railway Systems Engineering and Management. Liu, G., Said, R. & et, A. (eds.). Riverside, UK: WASET, p. 1795-1803 9 p. (International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering; vol. 8).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  369. Unravelling the structural and chemical features influencing deformation-induced martensitic transformations in steels

    Tirumalasetty, GK., van Huis, MA., Kwakernaak, C., Sietsma, J., Sloof, WG. & Zandbergen, HW., 2014, In : Scripta Materialia. 71, p. 29-32 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  370. 2015
  371. A cleaner process for selective recovery of valuable metals from electronic waste of complex mixtures of end-of-life electronic products

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2015, In : Environmental Science & Technology (Washington). 49, 13, p. 7981-7988 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  372. A mixed-mode model for the ferrite-to-austenite transformation in a ferrite/pearlite microstructure

    Mecozzi, MG., Bos, C. & Sietsma, J., 2015, In : Acta Materialia. 88, p. 302-313

    Research output: Contribution to journalArticleScientificpeer-review

  373. An improved X-ray diffraction analysis method to characterize dislocation density in lath martensitic structures

    Hajy Akbary, F., Sietsma, J., Bottger, AJ. & Santofimia, MJ., 2015, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 639, p. 208-218 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  374. Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Waste Management. 35, p. 227-235

    Research output: Contribution to journalArticleScientificpeer-review

  375. Computation of the flash-temperature at the wheel-rail contact using a 3D finite element model and its comparison with analytical methods

    Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2015, Proceedings of the 10th international conference on contact mechanics, CM2015. Tournay, H. & Grassie, S. (eds.). Pueblo, USA: Transportation Technology Center - AAR, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  376. Effect of Mn segregation on the microstructure development of quenching and partitioning (Q&P) steel

    Akbary, F. H., Kwakernaak, C., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 1155-1156

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  377. Effect of pre-existing martensite on the isothermal transformation kinetics below the Ms temperature in a low-chigh-Si steel

    Navarro-López, A., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 559-560

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  378. Influence of carbide morphology and microstructure on the kinetics of superficial decarburization of C-Mn Steel

    Alvarenga, HD., De Putte, TV., Van Steenberge, N., Sietsma, J. & Terryn, HA., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 1, p. 123-133 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  379. Investigation of bainite formation in a chemically inhomogeneous medium carbon steel

    Goulas, K., Mecozzi, M. G. & Sietsma, J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen et al, L-Q. (ed.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 71-72

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  380. Isothermal transformations in advanced high strength steels below martensite start temperature

    da Silva, EP., de Knijf, D., Xu, W., Föjer, C., Houbaert, Y., Sietsma, J. & Petrov, RH., 2015, In : Materials Science and Technology. 31, 7, p. 808-816

    Research output: Contribution to journalArticleScientificpeer-review

  381. Microstructural evolution during ultrafast heat treament of medium carbon steels

    Papaefthymiou, S., Goulas, K., Cerda, F. C., Sietsma, J. & Petrov, R., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 569-570

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  382. Molecular dynamics simulation of the effects of FCC/BCC interfaces on the nucleation and growth of martensite in iron

    Ou, X., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 817-824

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  383. Selective copper recovery from complex mixtures of end-of-life electronic products with ammonia-based solution

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Hydrometallurgy. 152, p. 91-99 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  384. Simultaneous electrochemical recovery of rare earth elements and iron from magnet scrap: A theoretical analysis

    Venkatesan, P., Sun, Z., Sietsma, J. & Yang, Y., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Filho, WL. (eds.). Amsterdam, The Netherlands: Elsevier, p. 335-346

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  385. Spinodal decomposition and the carbon solubility in BCC Fe-C

    Kim Lee, B. N., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & G. B. E. A. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 301-302

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  386. Understanding the role of prior austenite grain size in isothermal bainite formation kinetics

    Ravi, A. M., Sietsma, J. & Santofimia Navarro, M. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 643-644

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  387. 2016
  388. A critical evaluation of solubility of rare earth oxides in molten fluorides

    Guo, X., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 223-234

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  389. A physically based yield criterion I: Determination of the yield stress based on an alysis of pre-yield dislocation behaviour

    van Liempt, P., Bos, C. & Sietsma, J., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 662, p. 80-87

    Research output: Contribution to journalArticleScientificpeer-review

  390. A physically based yield criterion II: Incorporation of Hall Petch effect and resistance due to thermally activated dislocation glide

    van Liempt, P., Bos, C. & Sietsma, J., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 652, p. 7-13

    Research output: Contribution to journalArticleScientificpeer-review

  391. Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel

    Hajy Akbary, F., Sietsma, J., Miyamoto, G., Kamikawa, N., Petrov, R., Furuhara, T. & Santofimia Navarro, M., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 677, p. 505–514

    Research output: Contribution to journalArticleScientificpeer-review

  392. Austenite formation from martensite in a 13Cr6Ni2Mo supermartensitic stainless steel

    Bojack, A., Zhao, L., Morris, PF. & Sietsma, J., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 5, p. 1996-2009

    Research output: Contribution to journalArticleScientificpeer-review

  393. Bainite formation in medium-carbon low-silicon spring steels accounting for chemical segregation

    Goulas, K., Mecozzi, MG. & Sietsma, J., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 6, p. 3077-3087

    Research output: Contribution to journalArticleScientificpeer-review

  394. Characterization of structural change in rail surface using advance automatic crystallographic orientation microscopy

    Wu, J., Petrov, R., Li, S., Li, Z., Godet, S., Malet, L. & Sietsma, J., 2016, Proceedings of the 15th International Conference on Railway Engineering Design and Operation, CR 2016, Valencia, Spain. Brebbia, C. A. & Mera, J. M. (eds.). WIT Press, Vol. 162. p. 367-376 (WIT Transactions on the Built Environment; vol. 162).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  395. Complex electronic waste treatment: An effective process to selectively recover copper with solutions containing different ammonium salts

    Sun, Z., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2016, In : Waste Management. 57, p. 140–148

    Research output: Contribution to journalArticleScientificpeer-review

  396. Curly malachite on archaeological bronze: A systematic study of the shape and phenomenological approach of its formation mechanism

    Nienhuis, J., Robbiola, L., Giuliani, R., Joosten, I., Huisman, H., van Os, B. & Sietsma, J., 2016, In : e-Preservation Science . 13, p. 23-32

    Research output: Contribution to journalArticleScientificpeer-review

  397. Effect of prior athermal martensite on the isothermal transformation kinetics below M s in a low-C high-Si steel

    Navarro Lopez, A., Sietsma, J. & Santofimia Navarro, MJ., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 3, p. 1028-1039

    Research output: Contribution to journalArticleScientificpeer-review

  398. Exploring bainite formation kinetics distinguishing grain-boundary and autocatalytic nucleation in high and low-Si steels

    Ravi, AM., Sietsma, J. & Santofimia, MJ., 2016, In : Acta Materialia. 105, p. 155-164

    Research output: Contribution to journalArticleScientificpeer-review

  399. Hydrometallurgical extraction of rare earth elements from low grade mine tailings

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Metal Technology 2016. Alam, S., Kim, H., Neelameggham, N. R., Ouchi, T. & Oosterhof, H. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 17-29

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  400. Interaction of carbon partitioning, carbide precipitation and bainite formation during the Q&P process in a low C steel

    Hajy Akbary, F., Sietsma, J., Miyamoto, G., Furuhara, T. & Santofimia, MJ., 2016, In : Acta Materialia. 104, p. 72-83

    Research output: Contribution to journalArticleScientificpeer-review

  401. Laboratory simulation of martensite formation of white etching layer in rail steel

    Wu, J., Petrov, R. H., Naeimi, M., Li, Z., Dollevoet, R. & Sietsma, J., 2016, In : International Journal of Fatigue. 91, Part 1, p. 11-20

    Research output: Contribution to journalArticleScientificpeer-review

  402. Leaching of rare earth elements: Review of past and present technologies

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 319-334

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  403. Molecular dynamics simulations of the mechanisms controlling the propagation of bcc/fcc semi-coherent interfaces in iron

    Ou, X., Sietsma, J. & Santofimia Navarro, M., 2016, In : Modelling and Simulation in Materials Science and Engineering. 24, 5, p. 1-18

    Research output: Contribution to journalArticleScientificpeer-review

  404. Phase field modelling of microstructural evolution during the quenching and partitioning treatment in low-alloy steels

    Mecozzi, MG., Eiken, J., Santofimia, MJ. & Sietsma, J., 2016, In : Computational Materials Science. 112, Part A, p. 245-256

    Research output: Contribution to journalArticleScientificpeer-review

  405. Preferential nucleation during polymorphic transformations

    Sharma, H., Sietsma, J. & Offerman, E., 2016, In : Scientific Reports. 6, p. 1-7 30860 .

    Research output: Contribution to journalArticleScientificpeer-review

  406. Quantification of dislocation structures from anelastic deformation behaviour

    Arechabaleta Guenechea, Z., van Liempt, P. & Sietsma, J., 2016, In : Acta Materialia. 115, p. 314–323

    Research output: Contribution to journalArticleScientificpeer-review

  407. Quantitative determination of carbon concentration profiles by GD-OES for the study of decarburization in low-carbon steels

    Duarte Alvarenga, H., van Steenberge, N., Xhoffer, C., Steegstra, P., Sietsma, J. & Terryn, HA., 2016, In : Surface and Interface Analysis. 48, 2, p. 73-81

    Research output: Contribution to journalArticleScientificpeer-review

  408. Rare earth extraction from NdFeB magnets and rare earth oxides using aluminum chloride/fluoride molten salts

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 357-373

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  409. Recycling of metals from urban mines - A strategic evaluation

    Sun, ZHI., Xiao, Y., Agterhuis, H., Sietsma, J. & Yang, Y., 2016, In : Journal of Cleaner Production. 112, Part 4, p. 2977-2987

    Research output: Contribution to journalArticleScientificpeer-review

  410. Semiempirical model for the solubility of rare earth oxides in molten fluorides

    Guo, X., Sun, Z., Sietsma, J. & Yang, Y., 2016, In : Industrial and Engineering Chemistry Research. 55, 16, p. 4773-4781

    Research output: Contribution to journalArticleScientificpeer-review

  411. Thermo-mechanical effects in the formation mechanism of rail squats

    Naeimi, M., Li, Z., Dollevoet, RPBJ., Wu, J., Petrov, RH. & Sietsma, J., 2016, Proceedings of the 3rd international conference on railway technology: Research, development and maintenance. Pombo, J. (ed.). Stirlingshire: Civil-Comp Press, Vol. 110. p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  412. Thermodynamic aspects of carbon redistribution during ageing and tempering of Fe–Ni–C alloys

    Kim Lee, B., Sietsma, J. & Santofimia Navarro, M., 2016, In : Philosophical Magazine (London, 2003). 96, 25, p. 2632–2648

    Research output: Contribution to journalArticleScientificpeer-review

  413. Toward sustainability for recovery of critical metals from electronic waste: The hydrochemistry processes

    Sun, Z., Cao, C., Xiao, Y., Sietsma, J., Jin, W., Agterhuis, H. & Yang, Y., 2016, In : ACS Sustainable Chemistry and Engineering. 5, 1, p. 21-40

    Research output: Contribution to journalArticleScientificpeer-review

  414. “Brown etching layer”: A possible new insight into the crack initiation of rolling contact fatigue in rail steels?

    Li, S., Petrov, R., Wu, J., Li, Z., Dollevoet, R. & Sietsma, J., 2016, In : Engineering Failure Analysis. 66, p. 8–18

    Research output: Contribution to journalArticleScientificpeer-review

  415. 2017
  416. A quantitative investigation of the effect of Mn segregation on microstructural properties of quenching and partitioning steels

    Hajy Akbary, F., Sietsma, J., Petrov, R. H., Miyamoto, G., Furuhara, T. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 137, p. 27-30

    Research output: Contribution to journalArticleScientificpeer-review

  417. Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating

    Castro Cerda, F. M., Sabirov, I., Goulas, K., Sietsma, J., Monsalve, A. & Petrov, R. H., 2017, In : Materials & Design. 116, p. 448-460

    Research output: Contribution to journalArticleScientificpeer-review

  418. Bainite formation kinetics in steels and the dynamic nature of the autocatalytic nucleation process

    Ravi, A. M., Sietsma, J. & Santofimia Navarro, M., 2017, In : Scripta Materialia. 140, p. 82-86

    Research output: Contribution to journalArticleScientificpeer-review

  419. Characterization of bainitic/martensitic structures formed in isothermal treatments below the Ms temperature

    Navarro-López, A., Hidalgo Garcia, J., Sietsma, J. & Santofimia Navarro, M. J., 2017, In : Materials Characterization. 128, p. 248-256

    Research output: Contribution to journalArticleScientificpeer-review

  420. Development of a New Downscale Setup for Wheel-Rail Contact Experiments under Impact Loading Conditions

    Naeimi, M., Li, Z., Petrov, R., Sietsma, J. & Dollevoet, R., 2017, In : Experimental Techniques: a publication for the practicing engineer. 42 (2018), 1, p. 1-17

    Research output: Contribution to journalArticleScientificpeer-review

  421. Diffusion-limited dissolution of spherical particles: A critical evaluation and applications of approximate solutions

    Guo, X., Sietsma, J., Yang, Y., Sun, Z. & Guo, M., 2017, In : AIChE Journal. 63, 7, p. 2926-2934

    Research output: Contribution to journalArticleScientificpeer-review

  422. Effect of processing on microstructural features and mechanical properties of a reduced activation ferritic/martensitic EUROFER steel grade

    Puype, A., Malerba, L., De Wispelaere, N., Petrov, R. & Sietsma, J., 2017, In : Journal of Nuclear Materials. 494, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  423. Electrochemical extraction of rare earth metals in molten fluorides: Conversion of rare earth oxides into rare earth fluorides using fluoride additives

    Abbasalizadeh, A., Malfliet, A., Seetharaman, S., Sietsma, J. & Yang, Y., 2017, In : Journal of Sustainable Metallurgy. 3, 3, p. 627–637

    Research output: Contribution to journalArticleScientificpeer-review

  424. Electrochemical recovery of rare earth elements from magnets: Conversion of rare earth based metals into rare earth fluorides in molten salts

    Abbasalizadeh, A., Malfliet, A., Seetharaman, S., Sietsma, J. & Yang, Y., 2017, In : Materials Transactions. 58, 3, p. 400-405

    Research output: Contribution to journalArticleScientificpeer-review

  425. Electrochemistry during efficient copper recovery from complex electronic waste using ammonia based solutions

    Sun, Z., Cao, H., Venkatesan, P., Jin, W., Xiao, Y., Sietsma, J. & Yang, Y., 2017, In : Frontiers of Chemical Science and Engineering. 11, 3, p. 308-316

    Research output: Contribution to journalArticleScientificpeer-review

  426. Novel reactive anode for electrochemical extraction of rare earth metals from rare earth oxides

    Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2017, Rare Metal Technology 2017: Proceedings. Kim, H., Alam, S., Neelameggham, N. R., Oosterhof, H., Ouchi, T. & Guan, X. (eds.). Cham, Switzerland: Springer, p. 87-92 (The Minerals, Metals & Materials Series).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  427. Pingpongballen als wetenschappelijk instrument

    Sietsma, J., 2017, 175 jaar TU Delft: Erfgoed in 33 verhalen. van Woerkom, P. T. L. M., Ankersmit, W., Hagman, R., Heijmans, H. G., Olsder, G. J. & van de Schootbrugge, G. (eds.). Delft, The Netherlands: Histechnica, p. 168-172

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

  428. Reconstruction of the rolling contact fatigue cracks in rails using X-ray computed tomography

    Naeimi, M., Li, Z., Qian, Z., Zhou, Y., Wu, J., Petrov, R. H., Sietsma, J. & Dollevoet, R., 2017, In : NDT&E International. 92, p. 199-212

    Research output: Contribution to journalArticleScientificpeer-review

  429. The kinetics of formation and decomposition of austenite in relation to carbide morphology

    Alvarenga, H. D., Van Steenberge, N., Sietsma, J. & Terryn, H., 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 2, p. 828-840

    Research output: Contribution to journalArticleScientificpeer-review

  430. The role of silicon in carbon partitioning processes in martensite/austenite microstructures

    Kim Lee, B. N., Sietsma, J. & Santofimia Navarro, M., 2017, In : Materials & Design. 127, p. 336-345

    Research output: Contribution to journalArticleScientificpeer-review

  431. 2018
  432. Ageing behaviour of neutron/irradiated Eurofer97

    Carvalho, I., Fedorov, A., Kolluri, M., Luzginova, N., Schut, H. & Sietsma, J., 2018, The Ageing of Materials and Structures: Towards Scientific Solutions for the Ageing of Our Assets. van Breugel, K., Koleva, D. & van Beek, T. (eds.). Cham, Switzerland: Springer, p. 111-118

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  433. An environmentally friendly electro-oxidative approach to recover valuable elements from NdFeB magnet waste

    Venkatesan, P., Sun, Z. H. I., Sietsma, J. & Yang, Y., 2018, In : Separation and Purification Technology. 191, p. 384-391

    Research output: Contribution to journalArticleScientificpeer-review

  434. Analytical formulation for temperature evolution in flat wheel-rail sliding surfaces

    Alizadeh Otorabad, H., Tehrani, P. H., Younesian, D., Sietsma, J. & Petrov, R., 2018, In : Mathematical Problems in Engineering: theory, methods and applications. 2018, 7 p., 4239658.

    Research output: Contribution to journalArticleScientificpeer-review

  435. Characterization of the burden behaviour of iron ore pellets mixed with nut coke under simulated blast furnace conditions

    Gavel, D. J., Song, Q., Adema, A., van der Stel, J., Sietsma, J., Boom, R. & Yang, Y., 2018, In : Ironmaking & Steelmaking: processes, products and applications. 47 (2020), 2, p. 195-202

    Research output: Contribution to journalArticleScientificpeer-review

  436. Effect of KAlF4 on the efficiency of hot metal desulphurisation with magnesium

    Schrama, F., Beunder, E. M., Ji, F., Woolf, R., Barnes, C., Sietsma, J., Boom, R. & Yang, Y., 2018, 8th European Oxygen Steelmaking Conference (EOSC 2018). 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  437. Effect of W and N on mechanical properties of reduced activation ferritic/martensitic EUROFER-based steel grades

    Puype, A., Malerba, L., De Wispelaere, N., Petrov, R. & Sietsma, J., 2018, In : Journal of Nuclear Materials. 502, p. 282-288

    Research output: Contribution to journalArticleScientificpeer-review

  438. Effect of pre-existing defects in the parent fcc phase on atomistic mechanisms during the martensitic transformation in pure Fe: A molecular dynamics study

    Karewar, S., Sietsma, J. & Santofimia Navarro, M., 2018, In : Acta Materialia. 142, p. 71-81

    Research output: Contribution to journalArticleScientificpeer-review

  439. Experimental investigation and thermodynamic modelling of LiF-NdF3-DyF3 system

    Abbasalizadeh, A., Sridar, S., Chen, Z., Sluiter, M., Yang, Y., Sietsma, J., Seetharaman, S. & Hari Kumar, K. C., 2018, In : Journal of Alloys and Compounds. 753, p. 388-394

    Research output: Contribution to journalArticleScientificpeer-review

  440. Hydrometallurgical recovery of rare earth elements from mine tailings and WEEE

    Peelman, S., Kooijman, D., Sietsma, J. & Yang, Y., 2018, In : Journal of Sustainable Metallurgy. 4, 3, p. 367-377

    Research output: Contribution to journalArticleScientificpeer-review

  441. Influence of bainite reaction on the kinetics of carbon redistribution during the Quenching and Partitioning process

    Nishikawa, A. S., Santofimia Navarro, M., Sietsma, J. & Goldenstein, H., 2018, In : Acta Materialia. 142, p. 142-151

    Research output: Contribution to journalArticleScientificpeer-review

  442. Influence of the prior athermal martensite on the mechanical response of advanced bainitic steel

    Navarro-López, A., Hidalgo Garcia, J., Sietsma, J. & Santofimia Navarro, M., 2018, In : Materials Science and Engineering A. 735, p. 343-353

    Research output: Contribution to journalArticleScientificpeer-review

  443. Martensite crystallography and chemistry in dual phase and fully martensitic steels

    Du, C., Hoefnagels, J. P. M., Kölling, S., Geers, M. G. D., Sietsma, J., Petrov, R., Bliznuk, V., Koenraad, P. M., Schryvers, D. & Amin-Ahmadi, B., 2018, In : Materials Characterization. 139, p. 411-420

    Research output: Contribution to journalArticleScientificpeer-review

  444. Micro and nanoscale characterization of complex multilayer-structured white etching layer in rails

    Wu, J., Petrov, R., Kölling, S., Godet, S. & Sietsma, J., 2018, In : Metals. 8, 10, 18 p., 749.

    Research output: Contribution to journalArticleScientificpeer-review

  445. Quantitative study on dissolution behavior of Nd2O3 in fluoride melts

    Guo, X., Sun, Z., Sietsma, J., Blanpain, B., Guo, M. & Yang, Y., 2018, In : Industrial and Engineering Chemistry Research. 57, 5, p. 1380-1388

    Research output: Contribution to journalArticleScientificpeer-review

  446. Recovery of neodymium as (Na, Nd)(SO4)2 from the ferrous fraction of a general WEEE shredder stream

    Peelman, S., Sietsma, J. & Yang, Y., 2018, In : Journal of Sustainable Metallurgy. 4, 2, p. 276-287

    Research output: Contribution to journalArticleScientificpeer-review

  447. Selective electrochemical extraction of REEs from NdFeB magnet waste at room temperature

    Venkatesan, P., Vander Hoogerstraete, T., Hennebel, T., Binnemans, K., Sietsma, J. & Yang, Y., 2018, In : Green Chemistry. 20, 5, p. 1065-1073

    Research output: Contribution to journalArticleScientificpeer-review

  448. Selective extraction of rare-earth elements from NdFeB magnets by a room-temperature electrolysis pretreatment step

    Venkatesan, P., Vander Hoogerstraete, T., Binnemans, K., Sun, Z., Sietsma, J. & Yang, Y., 2018, In : ACS Sustainable Chemistry and Engineering. 6, 7, p. 9375-9382

    Research output: Contribution to journalArticleScientificpeer-review

  449. Slag optimisation considering iron loss and sulphide capacity in hot metal desulphurisation

    Schrama, F. N. H., Moosavi-Khoonsari, E., Beunder, E. M., Kooij, C., Boom, R., Sietsma, J. & Yang, Y., 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  450. Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

    Chen, Z., Qu, Y., Zeilstra, C., van der Stel, J., Sietsma, J. & Yang, Y., 2018, In : Ironmaking and Steelmaking. 47 (2020), 2, p. 173-177

    Research output: Contribution to journalArticleScientificpeer-review

  451. Thermomechanical analysis of the wheel-rail contact using a coupled modelling procedure

    Naeimi, M., Li, S., Li, Z., Wu, J., Petrov, R. H., Sietsma, J. & Dollevoet, R., 2018, In : Tribology International. 117, p. 250-260

    Research output: Contribution to journalArticleScientificpeer-review

  452. Unravelling dislocation networks in metals

    Arechabaleta Guenechea, Z., van Liempt, P. & Sietsma, J., 2018, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 710, p. 329-333

    Research output: Contribution to journalArticleScientificpeer-review

  453. 2019
  454. Accurate representation of the distributions of the 3D Poisson-Voronoi typical cell geometrical features

    Vittorietti, M., Kok, P. J. J., Sietsma, J. & Jongbloed, G., 2019, In : Computational Materials Science. 166, p. 111-118 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  455. Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel

    Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Characterization. 152, p. 67-75

    Research output: Contribution to journalArticleScientificpeer-review

  456. Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications

    Kumar, A., Makineni, S. K., Dutta, A., Goulas, C., Steenbergen, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 759, p. 210-223

    Research output: Contribution to journalArticleScientificpeer-review

  457. Effect of C on the martensitic transformation in Fe-C alloys in the presence of pre-existing defects: A molecular dynamics study

    Karewar, S., Sietsma, J. & Santofimia Navarro, M., 2019, In : Crystals. 9, 2, 13 p., 99.

    Research output: Contribution to journalArticleScientificpeer-review

  458. Effect of nut coke addition on physicochemical behaviour of pellet bed in ironmaking blast furnace

    Gavel, D. J., Adema, A., Stel, J. V. D., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 59, 5, p. 778-786

    Research output: Contribution to journalArticleScientificpeer-review

  459. In situ study on fracture behaviour of white etching layers formed on rails

    Kumar, A., Saxena, A. K., Kirchlechner, C., Herbig, M., Brinkmann, S., Petrov, R. H. & Sietsma, J., 2019, In : Acta Materialia. 180, p. 60-72

    Research output: Contribution to journalArticleScientificpeer-review

  460. In-situ observation of strain partitioning and damage development in continuously cooled carbide-free bainitic steels using micro digital image correlation

    Kumar, A., Dutta, A., Makineni, S. K., Herbig, M., Petrov, R. H. & Sietsma, J., 2019, In : Materials Science and Engineering A. 757, p. 107-116

    Research output: Contribution to journalArticleScientificpeer-review

  461. Influence of microstructure on mechanical properties of bainitic steels in railway applications

    Hajizad, O., Kumar, A., Li, Z., Petrov, R. H., Sietsma, J. & Dollevoet, R., 2019, In : Metals. 9, 7, 19 p., 778.

    Research output: Contribution to journalArticleScientificpeer-review

  462. Interaction of precipitation with austenite-to-ferrite phase transformation in vanadium micro-alloyed steels

    Ioannidou, C., Arechabaleta Guenechea, Z., Navarro Lopez, A., Rijkenberg, A., Dalgliesh, R. M., Kölling, S., Bliznuk, V., Pappas, C., Sietsma, J., van Well, A. & Offerman, E., 2019, In : Acta Materialia. 181, p. 10-24

    Research output: Contribution to journalArticleScientificpeer-review

  463. Melting Behaviour of Iron Ore Pellet Bed under Nut Coke Mixed Charge Conditions

    Gavel, D. J., Adema, A., van der Stel, J., Kwakernaak, K., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 60, 3, 12 p., ISIJINT-2019-246.

    Research output: Contribution to journalArticleScientificpeer-review

  464. Microstructural evolution of white and brown etching layers in pearlitic rail steels

    Kumar, A., Agarwal, G., Petrov, R., Goto, S., Sietsma, J. & Herbig, M., 2019, In : Acta Materialia. 171, p. 48-64

    Research output: Contribution to journalArticleScientificpeer-review

  465. Microstructure evolution during high-temperature partitioning of a medium-Mn quenching and partitioning steel

    Ayenampudi, S., Celada-Casero, C., Sietsma, J. & Santofimia, M. J., 2019, In : Materialia. 8, 11 p., 100492.

    Research output: Contribution to journalArticleScientificpeer-review

  466. Modeling temperature evolution of wheel flat during formation

    Alizadeh Otorabad, H., Younesian, D., Hosseini Tehrani, P., Sietsma, J. & Petrov, R., 2019, In : International Journal of Thermal Sciences. 140, p. 114-126

    Research output: Contribution to journalArticleScientificpeer-review

  467. Prediction of density and volume variation of hematite ore particles during in-flight melting and reduction

    Chen, Z. Y., Qu, Y. X., Zeilstra, C., Van Der Stel, J., Sietsma, J. & Yang, Y. X., 2019, In : Journal of Iron and Steel Research International. 26, 12, p. 1285-1294

    Research output: Contribution to journalArticleScientificpeer-review

  468. The hampering effect of precipitated carbon on hot metal desulfurization with magnesium

    Schrama, F. N. H., Beunder, E. M., Visser, H. J., Sietsma, J., Boom, R. & Yang, Y., 2019, In : Steel Research International. 8 p., 1900441.

    Research output: Contribution to journalArticleScientificpeer-review

  469. The influence of the austenite grain size on the microstructural development during quenching and partitioning processing of a low-carbon steel

    Celada-Casero, C., Kwakernaak, C., Sietsma, J. & Santofimia, M. J., 2019, In : Materials and Design. 178, 12 p., 107847.

    Research output: Contribution to journalArticleScientificpeer-review

  470. The role of the austenite grain size in the martensitic transformation in low carbon steels

    Alonso de Celada Casero, C., Sietsma, J. & Santofimia Navarro, M., 2019, In : Materials and Design. 167, 10 p., 107625.

    Research output: Contribution to journalArticleScientificpeer-review

  471. Theoretical aspects of spinodal decomposition in Fe-C

    Kim, B., Sietsma, J. & Santofimia, M. J., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 3, p. 1175-1184

    Research output: Contribution to journalArticleScientificpeer-review

  472. Use of iron reactive anode in electrowinning of neodymium from neodymium oxide

    Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2019, In : Electrochimica Acta. 310, p. 146-152

    Research output: Contribution to journalArticleScientificpeer-review

  473. Effect of graphite on hot metal desulphurisation

    Schrama, F., Beunder, E. M., Visser, H-J., Boom, R., Sietsma, J. & Yang, Y., 25 Jun 2019, Proceedings of METEC & 4th ESTAD. Düsseldorf: VDeH Verlag Stahleisen, 5 p. P308

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  474. 2020
  475. Impact of austenite grain boundaries and ferrite nucleation on bainite formation in steels

    Ravi, A. M., Kumar, A., Herbig, M., Sietsma, J. & Santofimia, M. J., 2020, In : Acta Materialia. 188, p. 424-434

    Research output: Contribution to journalArticleScientificpeer-review

  476. Influence of martensite/austenite interfaces on bainite formation in low-alloy steels below Ms

    Ravi, A. M., Navarro-López, A., Sietsma, J. & Santofimia, M. J., 2020, In : Acta Materialia. 188, p. 394-405

    Research output: Contribution to journalArticleScientificpeer-review

  477. The combined influence of grain size distribution and dislocation density on hardness of interstitial free steel

    Li, W., Vittorietti, M., Jongbloed, G. & Sietsma, J., 2020, In : Journal of Materials Science and Technology. 45, p. 35-43

    Research output: Contribution to journalArticleScientificpeer-review

  478. Thermal decomposition reaction kinetics of hematite ore

    Chen, Z., Zeilstra, C., van der Stel, J., Sietsma, J. & Yang, Y., 2020, In : ISIJ International. 60, 1, p. 65-72

    Research output: Contribution to journalArticleScientificpeer-review

  479. Unravelling the mechanical behaviour of advanced multiphase steels isothermally obtained below Ms

    Navarro-López, A., Hidalgo, J., Sietsma, J. & Santofimia, M. J., 2020, In : Materials and Design. 188, 12 p., 108484.

    Research output: Contribution to journalArticleScientificpeer-review

  480. General framework for testing Poisson-Voronoi assumption for real microstructures

    Vittorietti, M., Kok, P. J. J., Sietsma, J., Li, W. & Jongbloed, G., 11 Feb 2020, In : Applied Stochastic Models in Business and Industry. 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

ID: 138382