1. 2019
  2. Comparing Human Factors for Augmented Reality Supported Single-User and Collaborative Repair Operations of Industrial Robots

    Aschenbrenner, D., Leutert, F., Çençen, A., Verlinden, J., Schilling, K., Latoschik, M. & Lukosch, S., 2019, In : Frontiers Robotics AI. 6, MAY, p. 1-17 17 p., 37.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Safeguarding Syrian archaeological Heritage: humanities and natural sciences

    Nieuwenhuyse, O., Hiatlih, K., Hakki, R., al-Fakhri, A., Ngan-Tillard, D., Verlinden, J., Lambers, K., Buch, K. & Mara, H., 2019.

    Research output: Contribution to conferenceAbstractScientific

  4. 2018
  5. Collaborative Production Line Planning with Augmented Fabrication

    Aschenbrenner, D., Li, M., Dukalski, R., Verlinden, J. & Lukosch, S., 24 Aug 2018, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, VR 2018 - Proceedings. Institute of Electrical and Electronics Engineers (IEEE), p. 509-510 2 p. 8446533

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Comparing Different Augmented Reality Support Applications for Cooperative Repair of an Industrial Robot

    Aschenbrenner, D., Rojkov, M., Leutert, F., Verlinden, J., Lukosch, S., Latoschik, M. E. & Schilling, K., 2018, Proceedings of International Symposium for Mixed and Augmented Reality 2018. IEEE, p. 69-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Design Methodology to Improve Human-Robot Coproduction in Small and Medium Sized Enterprises

    Çençen, A., Verlinden, J. & Geraedts, J., 2018, In : IEEE/ASME Transactions on Mechatronics. 23, 3, p. 1092-1102 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Hatching for 3D prints: Line-based halftoning for dual extrusion fused deposition modeling

    Kuipers, T., Elkhuizen, W., Verlinden, J. & Doubrovski, E., 2018, In : Computers & Graphics. 74, p. 23-32 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Life Cycle Assessment of Wire + Arc Additive Manufacturing compared to green sand casting and CNC milling in stainless steel

    Bekker, A. & Verlinden, J., 2018, In : Journal of Cleaner Production. 177, p. 438-447 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. 2017
  11. 3D Hatching: Linear halftoning for dual extrusion fused deposition modeling

    Kuipers, T., Doubrovski, Z. & Verlinden, J., 2017, SCF' 17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-7 7 p. a2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. An exploration study for augmented and virtual reality enhancing situation awareness for plant teleanalysis

    Aschenbrenner, D., Maltry, N., Schilling, K. & Verlinden, J., 2017, Proceedings of ASME 2017 Computers and Information in Engineering Conference: 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers, Vol. 1. p. 1-13 13 p. 67790

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Architecture through the looking glass: Augmenting Fabrication in the built environment

    Verlinden, J. & Bekker, A., 2017, SCF'17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-2 2 p. a10

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Development of a haptic device with tactile and proprioceptive feedback for spatial design tasks

    Bakker, T., Verlinden, J., Abbink, D. & van Deventer, R., 2017, Proceedings 2017 IEEE International Symposium on Mixed and Augmented Reality : (ISMAR-Adjunct). Broll, W., Regenbrecht, H., Swan II, J. E., Bruder, G., Servières, M. & Sugimoto, M. (eds.). Piscataway, NJ, USA: IEEE, p. 223-228 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Pilot project Scanning for Syria

    Nieuwenhuijse, O., Ngan-Tillard, D. & Verlinden, J., 2017. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  16. Portable Rapid Visual Workflow Simulation Tool for Human Robot Coproduction

    Dukalski, R., Çençen, A., Aschenbrenner, D. & Verlinden, J., 2017, In : Procedia Manufacturing. 11, p. 185-197 13 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  17. Suited for performance: Fast full-scale replication of athlete with FDM

    van Tubergen, J., Verlinden, J., Stroober, M. & Baldewsing, R., 2017, SCF'17 Proceedings of the 1st Annual ACM Symposium on Computational Fabrication. New York: Association for Computing Machinery (ACM), p. 1-2 2 p. a17

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Thermal-Comfort Design of Personalized Casts

    Zhang, X., Fang, G., Dai, C., Verlinden, J., Wu, J., Whiting, E. & Wang, C., 2017, UIST'17 : Proceedings of the 30th Annual ACM Symposium on User Interface Software and Technology . New York: Association for Computing Machinery (ACM), p. 243-254 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. 2016
  20. 3d printed pills to investigate mis-connections

    Lepot, M., Hernandez, B., Cedillo Galarza, S., Goes, B. H. G., Schellart, A., Verlinden, J. & Clemens, F., 2016, p. 399-400.

    Research output: Contribution to conferenceAbstractScientific

  21. Investigating the links between the process parameters and their influence on the aesthetic evaluation of selective laser melted parts

    Galimberti, G., Doubrovski, Z., Guagliano, M., Previtali, B. & Verlinden, J., 2016, Solid Freeform Fabrication 2016: Proceedings of the 27th International Solid Freefrom Fabrication Symposium. Bourell, D. L., Crawford, R. H., Seepersad, C. C., Beaman, J. J., Fish, S. & Marcus, H. (eds.). Laboratory for Freeform Fabrication and University of Texas at Austin, p. 2367-2386 20 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Qualifying the performance of human-robot coproduction at a relabeling station

    Çençen, A., Verlinden, J. & Geraedts, J., 2016, Proceedings of the TMCE 2016. Horvath, I., Pernot, J-P. & Rusák, Z. (eds.). Organizing Committee of TMCE 2016, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Utilisation de pilules numérotées, colorées et imprimées en 3d pour l’inspection des erreurs de branchements et connections illicites en réseaux séparatifs

    Lepot, M., Hernandez, B., Cedillo Galarza, S., Goes, B. H. G., Schellart, A., Verlinden, J. & Clemens, F., 2016, Proceedings of NOVATECH 2016, June 28 - July 1, Lyon, France. 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. 2015
  25. Characterizing the state of the art of human-robot coproduction

    Cencen, A., Verlinden, JC. & Geraedts, JMP., 2015, Proceedings of the 7th international conference ICSR 2015. Tapus, A., Andre, E., Martin, JC., Ferland, F. & Ammi, M. (eds.). s.l.: Springer, p. 135-144 10 p. (Lecture Notes in Computer Science; vol. 9388).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Developing a parametric ear model for auricular reconstruction: A new step towards patient-specific implants

    Bos, EJ., Scholten, T., Song, Y., Verlinden, JC., Wolff, J., Forouzanfar, T., Helder, MN. & van Zuijlen, P., 2015, In : Journal of Cranio-Maxillofacial Surgery. 43, 3, p. 390-395 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Een stopcontact dat de hoek om gaat? Door de redactie

    Verlinden, JC., 2015

    Research output: Non-textual formWeb publication/siteProfessional

  28. Influence of mouthpiece geometry on saxophone playing

    Carral, S., Lorenzoni, V. & Verlinden, JC., 2015, Proceedings of the third Vienna talk on music acoustics: Bridging the gaps. Mayer, A., Chatziioannou, V. & Goebl, W. (eds.). Vienna: Institute of Music Acoustics (Wiener Klangstil) University of Music and Performing Arts Vienna, p. 71-77 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Learning from the trenches of embodiment design: The designing, prototyping, and fabricating a large interactive display

    Verlinden, JC., Saakes, D. & Luxen, RF., 2015, In : Archives of Design Research. 28, 3, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. New machine makes beef: Door Tomas van Dijk

    Verlinden, JC., 2015

    Research output: Non-textual formWeb publication/siteProfessional

  31. TU Delft assistant professor reimagines the power outlet via 3D printing: Door Heidi Milkert

    Verlinden, JC., 2015

    Research output: Non-textual formWeb publication/siteProfessional

  32. 2014
  33. A study of correlations among image resolution, reaction time, and extent of motion in remote motor interactions

    Rusak, Z., Kooijman, A., Song, Y., Verlinden, JC. & Horvath, I., 2014, In : Advances in Human - Computer Interaction. 2014, p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Adapting scrum development method for the development of cyber-physical systems

    Mulder, FA., Verlinden, JC. & Maruyama, T., 2014, Tools and methods of competitive engineering: Digital proceedings of the tenth international symposium on tools and methods of competitive engineering, TMCE 2014. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 173-186 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Animaris geneticus parvus: Design of a compex multi-body walking mechanism

    Jansen, B., Doubrovski, EL. & Verlinden, JC., 2014, In : Rapid Prototyping Journal: the international journal for research on additive manufacturing technologies and rapid product development. 20, 4, p. 311-319 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Developing an interactive augmented prototyping methodology to support design reviews

    Verlinden, JC., 2014, Delft: VSSD. 196 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  37. Exploring human robot coproduction

    Cencen, A., Van Deurzen, K., Verlinden, J. C. & Geraedts, J. M. P., 2014, 19th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2014. Martinez Garcia, H. & Grau, A. (eds.). Institute of Electrical and Electronics Engineers (IEEE), 7005329

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Redefining the role of designers within an urban community using digital design and localized manufacturing of wearables

    Stam, CJ., van der Velden, NM., Rubio, G. & Verlinden, JC., 2014, Proceedings of the 5th international conference on additive technologies iCAT 2014. Drstven¿ek, I. (ed.). Ljubljana: Interesansa - zavod, p. 82-89 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Systematic enablers for advanced product design support

    Opiyo, EZ., Horvath, I., van der Vegte, WF., Rusak, Z., Vroom, RW., Verlinden, JC., Song, Y., Vergeest, JSM. & Gerritsen, BHM., 2014, Advances in Computational Sciences and Information in Engineering. Michopoulos, J., Rosen, D., Paredis, C. & Vance, J. (eds.). s.l.: ASME, p. 183-207 600 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  40. Teaching students to apply multiple physical modeling methods

    Wiegers, T., Verlinden, JC. & Vergeest, JSM., 2014, Tools and methods of competitive engineering: Digital proceedings of the tenth international symposium on tools and methods of competitive engineering, TMCE 2014. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 1603-1614 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. 2013
  42. Beter beslissen door augmented reality

    Verlinden, JC., 2013, De lichtkogel 2012: Rijkswaterstaat en de veranderende samenleving. s.n. (ed.). s.l.: Rijkswaterstaat, p. 81-84 135 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  43. Development of a motion system for an advanced sailing simulator

    Mulder, FA. & Verlinden, JC., 2013, 6th Asia-Pacific congress on sports technology (APCST). Chan, KM., Subic, A., Fuss, F. & Clifton, P. (eds.). s.l.: Elsevier, p. 428-434 7 p. (Procedia Engineering; vol. 60).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Embracing the digital in instrument making: Towards a musician-tailored mouthpiece by 3D printing

    Lorenzoni, V., Doubrovski, EL. & Verlinden, JC., 2013, Proceedings of the Stockholm music acoustics conference 2013, SMAC 2013. Bresin, R. & Askenfelt, A. (eds.). s.l.: s.n., p. 419-424 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Enhancement of presence in a virtual sailing environment through localized wind simulation

    Verlinden, JC., Mulder, FA., Vergeest, JSM., de Jonge, A., Krutiy, D., Nagy, Z., Logeman, BJ. & Schouten, P., 2013, 6th Asia-Pacific congress on sports technology (APCST). Chan, KM., Subic, A., Fuss, F. & Clifton, P. (eds.). s.l.: Elsevier, p. 435-441 7 p. (Procedia Engineering; vol. 60).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Nonlinear stories told by cups and saucers

    de Reus, L., Verlinden, JC. & Roozenburg, M., 2013, In : Art. 2013, 3, p. 34-39 6 p.

    Research output: Contribution to journalArticleProfessional

  47. 2012
  48. Acoustic investigation of novel saxophone mouthpiece designs produced by additive manufacturing

    Doubrovski, EL., Verlinden, JC., Geraedts, JMP., Horvath, I. & Konietschke, VLM., 2012, Proceedings of the ninth international symposium on tools and methods of competitive engineering - TCME-2012. Horvath, I., Rusak, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 1139-1146 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Assessing the industrial impact of interactive augmented prototyping in several abstraction levels

    Verlinden, JC., Doubrovski, EL. & Horvath, I., 2012, Proceedings of the ninth international symposium on tools and methods of competitive engineering - TCME-2012. Horvath, I., Rusak, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 1205-1214 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Augmented prototyping: Augemented reality to support the design process

    Verlinden, JC., 2012, In : Art. 2012, 2, p. 62-71 10 p.

    Research output: Contribution to journalArticleProfessional

  51. First steps towards collaboratively edited design for additive manufacturing knowledge

    Doubrovski, EL., Verlinden, JC. & Horvath, I., 2012, Proceeding of SFF Symposium 2012. s.n. (ed.). s.l.: s.n., p. 891-901 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. How it was made: A tangible replica with mobile ar

    Verlinden, JC., Roozenburg, NFM. & Song, Y., 2012, In : Art. 2012, 2, p. 32-34 3 p.

    Research output: Contribution to journalArticleProfessional

  53. NSJ field Lab: 3D printed mouthpieces

    Verlinden, JC., 2012

    Research output: Non-textual formExhibitionProfessional

  54. Pixels want to be freed! Introducing augmented reality enabling hardware technologies

    Verlinden, JC., 2012, In : Art. 2012, 1, p. 42-59 18 p.

    Research output: Contribution to journalArticleProfessional

  55. The effect of motion on presence during virtual sailing for advanced training

    Mulder, FA., Verlinden, JC. & Dukalski, RR., 2012, ISPR 2012 presence life. s.n. (ed.). s.l.: s.n., p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  56. Three views on additive manufacturing: Business, research and education

    Geraedts, JMP., Doubrovski, EL., Verlinden, JC. & Stellingwerff, MC., 2012, Proceedings of the ninth international symposium on tools and methods of competitive engineering - TCME-2012. Horvath, I., Rusak, Z., Albers, A. & Behrendt, M. (eds.). Delft: Delft University of Technology, p. 55-68 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. 2011
  58. Bridging the multiple reality gap: application of augmented reality in new product development

    Chatzimichali, AP., Gijselaers, W. H., Smulders, FEHM., Jonker, PP., Verlinden, JC., Segers, MSR., Bossche, P. & Emmerik, H., 2011, Proceedings of the 2011 IEEE International Conference on Systems, Man and Cybernetics - SMC. Sun, X., Truong, KP., Pantic, M. & Nijholt, A. (eds.). Piscataway: IEEE Society, p. 1914-1919 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Exploring the links between CAD model and build strategy for inexpensive FDM

    Doubrovski, EL., Verlinden, JC. & Geraedts, JMP., 2011, Proceedings of NIP27: The 27th International Conference on Digital Printing Technologies and Digital Fabrication. Benning, P. (ed.). Springfield: IS&T, p. 500-506 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 Next

ID: 122512