1. 2008
  2. Composites on the drawing board

    IJsselmuiden, ST. & van Campen, JMJF., 2008, Leonardo Times. Gutleb, T. (ed.). Delft: Delft University of Technology, p. 9-10 2 p. (Leonardo times; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  3. Deliverable 5: Tow Path Definition

    IJsselmuiden, ST., van Campen, JMJF. & Gurdal, Z., 2008, Delft: TU-Delft Aerospace Structures. 18 p.

    Research output: Book/ReportReportScientific

  4. General Blending Definitions for Stackling Sequence Design of Composite Laminate Structures

    van Campen, JMJF., Seresta, O., Abdalla, MM. & Gurdal, Z., 2008, Proceedings of the 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Hyer, M. (ed.). USA: AIAA, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. 2009
  6. Blended designs for composite plates with two concentric lay-ups under compression

    van Campen, JMJF., Kassapoglou, C., Abdalla, MM. & Gurdal, Z., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Retrieving Variable Stiffness Laminates from Lamination Parameters Distribution

    van Campen, JMJF. & Gurdal, Z., 2009, Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2009. Cesnik, C. E. S. & Pitt, D. M. (eds.). AIAA, p. 1-23 23 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. 2011
  9. Composite laminate optimization with discrete variables

    Gurdal, Z., IJsselmuiden, ST. & van Campen, JMJF., 2011, Encyclopedia of Aerospace Engineering. Blockley, R. & Shyy, W. (eds.). Weiheim, Germany: John Wiley & Sons, p. 1-12 5864 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  10. Optimum Lay-up Design of Variable Stiffness Composite Structures

    van Campen, JMJF., 2011, Zutphen: Wohrmann Print Service. 229 p.

    Research output: ThesisDissertation (TU Delft)Scientific

  11. Design of fiber-steered variable-stiffness laminates based on a given lamination parameters distribution

    Van Campen, J. M. J. F., Kassapoglou, C. & Gürdal, Z., 1 Dec 2011, 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. AIAA, 11 p. AIAA 2011-1894

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. 2012
  13. Generating realistic laminate fiber angle distributions for optimal variable stiffness laminates

    van Campen, JMJF., Kassapoglou, C. & Gurdal, Z., 2012, In : Composites Part B: Engineering. 43, 2, p. 354-360 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. 2016
  15. (Blended Learning)2: Blending content- and learning-oriented objectives in a blended learning environment

    Rans, C., Teixeira De Freitas, S., van Campen, J. & Saunders, G., 2016, 44th SEFI Conference: Tampere, Finland. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1 2 Next

ID: 220698