1. (Blended Learning)2: Blending content- and learning-oriented objectives in a blended learning environment

    Rans, C., Teixeira De Freitas, S., van Campen, J. & Saunders, G., 2016, 44th SEFI Conference: Tampere, Finland. 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  2. Blended designs for composite plates with two concentric lay-ups under compression

    van Campen, JMJF., Kassapoglou, C., Abdalla, MM. & Gurdal, Z., 2009, Proceedings of ICCM17. Banks, W. & Wisnom, MR. (eds.). London: IOM, p. 1-11 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  3. Composite laminate optimization with discrete variables

    Gurdal, Z., IJsselmuiden, ST. & van Campen, JMJF., 2011, Encyclopedia of Aerospace Engineering. Blockley, R. & Shyy, W. (eds.). Weiheim, Germany: John Wiley & Sons, p. 1-12 5864 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  4. Composites on the drawing board

    IJsselmuiden, ST. & van Campen, JMJF., 2008, Leonardo Times. Gutleb, T. (ed.). Delft: Delft University of Technology, p. 9-10 2 p. (Leonardo times; vol. 1).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

  5. Deliverable 5: Tow Path Definition

    IJsselmuiden, ST., van Campen, JMJF. & Gurdal, Z., 2008, Delft: TU-Delft Aerospace Structures. 18 p.

    Research output: Book/ReportReportScientific

  6. Demonstration of a Computationally Efficient Method for Stacking Sequence Blending of Composite Laminates

    van Campen, J. & van den Oord, E., 2018. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  7. Design of fiber-steered variable-stiffness laminates based on a given lamination parameters distribution

    Van Campen, J. M. J. F., Kassapoglou, C. & Gürdal, Z., 1 Dec 2011, 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics Inc. (AIAA), 11 p. AIAA 2011-1894

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  8. Development of a generic geometry to test the limits of automated draping and stamp forming processes in composite manufacturing

    van Campen, J., 2017, Proceedings of the Third International Symposium on Composite Manufacturing. Van Hoa, S. (ed.). p. 125-130 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  9. Experimental and analytical analysis on the stacking sequence of composite pressure vessels

    Nebe, M., Asijee, T., Braun, C., van Campen, J. & Walther, F., 2020, (Accepted/In press) In : Composite Structures. 247, 9 p., 112429.

    Research output: Contribution to journalReview articleScientificpeer-review

  10. General Blending Definitions for Stackling Sequence Design of Composite Laminate Structures

    van Campen, JMJF., Seresta, O., Abdalla, MM. & Gurdal, Z., 2008, Proceedings of the 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Hyer, M. (ed.). USA: American Institute of Aeronautics and Astronautics Inc. (AIAA), p. 1-13 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

Previous 1 2 Next

ID: 220698