1. 2020
  2. A New Electron Backscatter Diffraction-Based Method to Study the Role of Crystallographic Orientation in Ductile Damage Initiation

    Shakerifard, B., Galan Lopez, J. & Kestens, L., 2020, In : Metals. 10, 1, 11 p., 113.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Friction stir welding of advanced high strength dual phase steel: Microstructure, mechanical properties and fracture behavior

    Mahmoudiniya, M., Kokabi, A. H., Goodarzi, M. & Kestens, L. A. I., 2020, In : Materials Science and Engineering A. 769, 13 p., 138490.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Lifetime and damage characterization of compacted graphite iron during thermo-mechanical fatigue under varying constraint conditions

    Lopez-Covaleda, E. A., Ghodrat, S. & Kestens, L. A. I., 2020, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 1, p. 226-236 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Semi in-situ observation of crack initiation in compacted graphite iron during thermo mechanical fatigue

    Lopez-Covaleda, E. A., Ghodrat, S. & Kestens, L. A. I., 2020, In : International Journal of Fatigue. 137, 9 p., 105648.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Statistical analysis of dislocation substructure in commercially pure aluminum subjected to static and dynamic high pressure torsion

    Lanjewar, H., Naghdy, S., Verleysen, P. & Kestens, L. A. I., 2020, In : Materials Characterization. 160, 11 p., 110088.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 2019
  8. The assessment of growth kinetics in the intermetallic layers of Al-AlxNiy-Ni laminate composites

    Azimi, M., Toroghinejad, M. R., Shamanian, M. & Kestens, L. A. I., 14 Aug 2019, In : Journal of Physics: Conference Series. 1270, 1, 7 p., 012026.

    Research output: Contribution to journalConference articleScientificpeer-review

  9. Microstructure and Texture Control in Cold Rolled High Strength Steels

    Janakiram, S., Gautam, J., Miroux, A., Moerman, J. & Kestens, L., 2019, In : Diffusion Foundations. 22, p. 84-93

    Research output: Contribution to journalArticleScientificpeer-review

  10. Miniature tensile testing of SPD processed fine-grained aluminum

    Lanjewar, H. A., Naghdy, S., Kestens, L. A. I. & Verleysen, P., 2019, In : Journal of Physics: Conference Series. 1270, 1, 6 p., 012022.

    Research output: Contribution to journalConference articleScientificpeer-review

  11. Severe plastically deformed commercially pure aluminum: Substructure, micro-texture and associated mechanical response during uniaxial tension

    Lanjewar, H., Naghdy, S., Vercruysse, F., Kestens, L. A. I. & Verleysen, P., 2019, In : Materials Science and Engineering A. 764, 138195.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Strain rate dependent dynamic mechanical response of bainitic multiphase steels

    Shakerifard, B., Galan Lopez, J., Taboada Legaza, M. C., Verleysen, P. & A.I. Kestens, L., 2019, In : Materials Science and Engineering A. 745, p. 279-290

    Research output: Contribution to journalArticleScientificpeer-review

  13. TNR dependent hot rolling microstructure and texture development in c-Mn dual phase and HSLA steels

    Gautam, J., Miroux, A., Moerman, J. & Kestens, L., 2019, In : Defect and Diffusion Forum. 391, p. 120-127

    Research output: Contribution to journalArticleScientificpeer-review

  14. The effect of martensite-austenite constituent characteristics on the mechanical behavior of quenched-partitioned steel at room temperature

    Karam-Abian, M., Zarei-Hanzaki, A., Abedi, H., Ghodrat, S., Hajy-Akbary, F. & Kestens, L., 2019, In : Steel Research International. 90, 3, 8 p., 1800399.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Thermo-Mechanical Fatigue Lifetime Assessment of Spheroidal Cast Iron at Different Thermal Constraint Levels

    Ghodrat, S., Kalra, A., Kestens, L. & Riemslag, T., 2019, In : Metals. 9, 10, 23 p., 1068.

    Research output: Contribution to journalArticleScientificpeer-review

  16. “Flash” annealing in a cold-rolled low carbon steel alloyed with Cr, Mn, Mo, and Nb: Part II—Anisothermal recrystallization and transformation textures

    Castro Cerda, F. M., Kestens, L. A. I. & Petrov, R. H., 2019, In : Steel Research International. 90, 1, 13 p., 1800277.

    Research output: Contribution to journalArticleScientificpeer-review

  17. 2018
  18. Proposal of characterization procedure of metal-graphite interface strength in compacted graphite iron

    Lopez-Covaleda, E. A., Ghodrat, S., Kestens, L. A. I., Sacre, C. H. & Pardoen, T., 7 Jul 2018, In : Materials. 11, 7, 12 p., 1159.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Crystallographically resolved damage initiation in advanced high strength steel

    Shakerifard, B., Galan Lopez, J., Hisker, F. & Kestens, L. A. I., 2018, In : IOP Conference Series: Materials Science and Engineering. 375, 1, 7 p., 012022.

    Research output: Contribution to journalConference articleScientificpeer-review

  20. Effect of banding on micro-mechanisms of damage initiation in bainitic/martensitic steels

    Shakerifard, B., Galan Lopez, J., Hisker, F. & Kestens, L. A. I., 2018, In : Materials Science and Engineering A. 735, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  21. Grain and texture evolution in nano/ultrafine-grained bimetallic Al/Ni composite during accumulative roll bonding

    Azimi, M., Toroghinejad, M. R., Shamanian, M. & Kestens, L. A. I., 2018, In : Journal of Materials Science. 53, 17, p. 12553-12569

    Research output: Contribution to journalArticleScientificpeer-review

  22. Microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel

    Mahmoudiniya, M., Kokabi, A. H., Kheirandish, S. & Kestens, L. A. I., 2018, In : Materials Science and Engineering A. 737, p. 213-222

    Research output: Contribution to journalArticleScientificpeer-review

  23. Optimization of crystallographic texture for sheet-forming applications using Taylor-based Models

    Galán-López, J. & Kestens, L. A. I., 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 11, p. 5745-5762

    Research output: Contribution to journalArticleScientificpeer-review

  24. Resolving the geometrically necessary dislocation content in severely deformed aluminum by transmission Kikuchi diffraction

    Naghdy, S., Verleysen, P., Petrov, R. & Kestens, L., 2018, In : Materials Characterization. 140, p. 225-232

    Research output: Contribution to journalArticleScientificpeer-review

  25. Ultrafine gradient microstructure induced by severe plastic deformation under sliding contact conditions in copper

    Figueroa, C. G., Schouwenaars, R., Cortés-Pérez, J., Petrov, R. & Kestens, L., 2018, In : Materials Characterization. 138, p. 263-273

    Research output: Contribution to journalArticleScientificpeer-review

  26. 2017
  27. Advanced high strength steels: Improved properties by design of textures and microstructures

    Kestens, L., De Knijf, D., Castro Cerda, F. & Petrov, R., 2017, In : IOP Conference Series: Materials Science and Engineering. 219, 14 p., 012004.

    Research output: Contribution to journalConference articleScientificpeer-review

  28. Evaluation of crystallographic changes and plastic strain ratio in Al alloys

    Sidor, J. J., Petrov, R. H., Xie, Q., Van Houtte, P. & Kestens, L. A. I., 2017, In : Materials Science and Technology. 33, 6, p. 667-677

    Research output: Contribution to journalArticleScientificpeer-review

  29. Measuring plasticity with orientation contrast microscopy in aluminium 6061-T4

    Ghodrat, S., Riemslag, T. & Kestens, L., 2017, In : Metals. 7, 4, 8 p., 108.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Microstructural evolution study of severely deformed commercial aluminium by transmission Kikuchi diffraction

    Naghdy, S., Percq, L. L., Serret, R., Petrov, R., Hertelé, S., Kestens, L. & Verleysen, P., 2017, In : Materials Science and Technology. 33, 6, p. 678-687

    Research output: Contribution to journalArticleScientificpeer-review

  31. Morphological and crystallographic anisotropy of severely deformed commercially pure aluminium by three-dimensional electron backscatter diffraction

    Naghdy, S., Pirgazi, H., Verleysen, P., Petrov, R. & Kestens, L., 2017, In : Journal of Applied Crystallography. 50, 5, p. 1512-1523

    Research output: Contribution to journalArticleScientificpeer-review

  32. The effect of heating rate on the recrystallization behavior in cold rolled ultra low carbon steel

    Castro Cerda, F. M., Vercruysse, F., Minh, T. N., Kestens, L., Monsalve, A. & Petrov, R., 2017, In : Steel Research International. 88, 1, 9 p., 1600351.

    Research output: Contribution to journalArticleScientificpeer-review

  33. The effect of strain on the formation of an intermetallic layer in an Al-Ni laminated composite

    Azimi, M., Toroghinejad, M. R., Shamanian, M. & Kestens, L. A. I., 2017, In : Metals. 7, 10, 14 p., 445.

    Research output: Contribution to journalArticleScientificpeer-review

  34. The effect of the pre-heating stage on the microstructure and texture of a cold rolled FeCMnAlSi steel under conventional and ultrafast heating

    Castro Cerda, F. M., Goulas, K., Sabirov, I., Kestens, L. A. I. & Petrov, R. H., 2017, In : Materials Characterization. 130, p. 188-197 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Use of local electrochemical methods (SECM, EC-STM) and AFM to differentiate microstructural effects (EBSD) on very pure copper

    Martinez Lombardia, E., Lapeire, L., Maurice, V., De Graeve, I., Klein, L., Marcus, P., Verbeken, K., Kestens, L. A. I., Gonzalez Garcia, Y., Mol, A. & Terryn, H., 2017, In : Corrosion Science and Technology. 16, 1, p. 1-7

    Research output: Contribution to journalArticleScientific

  36. 2016
  37. An approach to microstructure quantification in terms of impact properties of HSLA pipeline steels

    Gervasyev, A., Carretero Olalla, V., Sidor, J., Sanchez Mouriño, N., Kestens, L. A. I. & Petrov, R. H., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 677, p. 163-170 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Effect of grain boundary-magnetic domain interaction on the magnetization behavior of non-oriented electrical steels

    Pirgazi, H., Petrov, RH. & Kestens, L., 2016, In : Steel Research International. 87, 2, p. 210-218

    Research output: Contribution to journalArticleScientificpeer-review

  39. Evolution of microstructure and texture in commercial pure aluminum subjected to high pressure torsion processing

    Naghdy, S., Kestens, L., Hertelé, S. & Verleysen, P., 2016, In : Materials Characterization. 120, p. 285-294

    Research output: Contribution to journalArticleScientificpeer-review

  40. Study of the influence of the microstructure on the corrosion properties of pure copper

    Martinez-Lombardia, E., Lapeire, L., De Graeve, I., Verbeken, K., Kestens, L. A. I. & Terryn, H., 2016, In : Materials and Corrosion. 67, 8, p. 847-856

    Research output: Contribution to journalArticleScientificpeer-review

  41. Texture formation in metal alloys with cubic crystal structures

    Kestens, L. A. I. & Pirgazi, H., 2016, In : Materials Science and Technology. 32, 13, p. 1303-1315

    Research output: Contribution to journalReview articleScientificpeer-review

  42. The effect of ultrafast heating in cold-rolled low carbon steel: Recrystallization and texture evolution

    Castro Cerda, F. M., Kestens, L. A. I., Monsalve, A. & Petrov, R. H., 2016, In : Metals. 6, 11, 14 p., 288.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Tribological and microstructural characterization of ultrafine layers induced by wear in ductile alloys

    Figueroa, C., Schouwenaars, R., Jacobo, V., Ortiz, A., Petrov, R. & Kestens, L., 2016, In : Tribology Online. 11, 2, p. 389-395

    Research output: Contribution to journalArticleScientificpeer-review

  44. 2015
  45. Correlating r-value and through thickness texture in Al¿Mg¿Si alloy sheets

    Ghosh, M., Miroux, AG. & Kestens, LAI., 2015, In : Journal of Alloys and Compounds. 619, p. 585-591 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Evolution of recrystallization textures in particle containing Al alloys after various rolling reductions: Experimental study and modeling

    Sidor, JJ., Decroos, K., Petrov, RH. & Kestens, LAI., 2015, In : International Journal of Plasticity. 66, p. 119-137

    Research output: Contribution to journalArticleScientificpeer-review

  47. Factors influencing the austenite stability during tensile testing of quenching and partitioning steel determined via in-situ electron backscatter diffraction

    de Knijf, D., Föjer, C., Kestens, LAI. & Petrov, R., 2015, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 638, p. 219-227

    Research output: Contribution to journalArticleScientificpeer-review

  48. Fully automated orientation relationship calculation and prior austenite reconstruction by random walk clustering

    Gomes, E. & Kestens, LAI., 2015, Proceedings of the 17th International Conference on Textures of Materials (ICOTOM 17). Skrotzki, W. & Oertel, CG. (eds.). IOP Publishing, 4 p. 012059. (IOP Conference Series: Materials Science and Engineering; vol. 82, no. 1).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  49. Grain boundary character distribution derived from three-dimensional microstructure reconstruction

    Pirgazi, H. & Kestens, LAI., 2015, In : IOP Conference Series: Materials Science and Engineering. 82, 4 p., 012086.

    Research output: Contribution to journalConference articleScientificpeer-review

  50. Quantitative correlation between slip patterning and microstructure during tensile elongation in 6xxx series aluminum alloy

    Ghodrat, S., Pirgazi, H. & Kestens, LAI., 2015, Proceedings of the 17th International Conference on Textures of Materials. Skrotzki, W. & Oertel, CG. (eds.). Bristol, UK: IOP Publishing, p. 1-4 4 p. (IOP Conference Series: Materials Science and Engineering; vol. 82).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  51. Shear banding and its contribution to texture evolution in rotated Goss orientations of BCC structured materials

    Nguyen-MInh, T., Sidor, J. J., Petrov, RH. & Kestens, LAI., 2015, Proceedings of the 17th International Conference on Textures of Materials. Skrotzki, W. & Oertel, CG. (eds.). Bristol, UK: IOP Publishing, 4 p. (IOP Conference Series: Materials Science and Engineering; vol. 82).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  52. Texture comparison between cold rolled and cryogenically rolled pure copper

    Lapeire, L., Sidor, J., Martinez Lombardia, E., Verbeken, K., de Graeve, I., Terryn, HA. & Kestens, LAI., 2015, Proceedings of the 17th International Conference on Textures of Materials. Skrotzki, W. & Oertel, CG. (eds.). Bristol, UK: IOP Publishing, p. 1-5 5 p. (IOP Conference Series: Materials Science and Engineering; vol. 82).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  53. Texture comparison between room temperature rolled and cryogenically rolled pure copper

    Lapeire, L., Sidor, J., Verleysen, P., Verbeken, K., De Graeve, I., Terryn, HA. & Kestens, LAI., 2015, In : Acta Materialia. 95, p. 224-235 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Three-dimensional characterization of grain boundaries in pure nickel by serial sectioning via mechanical polishing

    Pirgazi, H., Glowinski, K., Morawiec, A. & Kestens, LAI., 2015, In : Journal of Applied Crystallography. 48, p. 1672-1678

    Research output: Contribution to journalArticleScientificpeer-review

  55. Ultrafast heating of advanced high strength steels

    Petrov, R. H., Puype, A., De Knijf, D. & Kestens, L., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Chen, L-Q., Militzer, M. & Botton et al, G. (eds.). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 1157-1158

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  56. 2014
  57. Analysis of the strengthening mechanisms in pipeline steels as a function of the hot rolling parameters

    Carretero Olalla, V., Bliznuk, V., Sanchez, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 604, May, p. 46-56 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel

    de Knijf, D., Petrov, RH., Fojer, C. & Kestens, LAI., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 615, p. 107-115 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Microstructural control of ductile crack propagation in TMCP HSLA pipeline steels

    Carretero Olalla, V., Sanchez, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2014, Proceedings 8th International Conference on Processing and Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Zurich, Switzerland: Trans Tech Publications, p. 568-573 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  60. Modeling the crystallographic changes in processing of Al alloys

    Sidor, JJ., Petrov, RH. & Kestens, LAI., 2014, In : Journal of Materials Science. 49, 9, p. 3529-3540 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Orientation dependence of the martensite transformation in a quenched and partitioned steel subjected to uniaxial tension

    de Knijf, D., Nguyen Minh, T., Petrov, RH., Kestens, LAI. & Jonas, JJ., 2014, In : Journal of Applied Crystallography. 47, 4, p. 1261-1266 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Three-dimensional EBSD characterization of thermo-mechanical fatigue crack morphology in compacted graphite iron

    Pirgazi, H., Ghodrat, S. & Kestens, LAI., 2014, In : Materials Characterization. 90, p. 13-20 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Warm deep-drawing and post drawing analysis of two Al-Mg-Si alloys

    Ghosh, M., Miroux, A., Werkhoven, RJ., Bolt, PJ. & Kestens, LAI., 2014, In : Journal of Materials Processing Technology. 214, 4, p. 756-766 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. 2013
  65. An infrared spectroscopic study of sodium silicate adsorption on porous anodic alumina

    Gaggiano, R., de Graeve, I., Mol, JMC., Verbeken, K., Kestens, LAI. & Terryn, HA., 2013, In : Surface and Interface Analysis. 45, p. 1098-1104 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Austenite stability study by micro-tensile testing of Q&P steel.

    Knijff, D., Petrov, RH., Föjer, C. & Kestens, LAI., 2013, Proceedings of the International Symposium on New Developments in Advanced High-Strength Sheet Steels.. Hickey, KD. & Ashburn, RE. (eds.). Vail, Colorado, USA: AIST, p. 185-195 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  67. Automatic meshing method for optimization of the fusion zone dimensions in finite element models of welds

    Decroos, K., Ohms, C., Petrov, RH., Seefeldt, M., Verhaeghe, F. & Kestens, LAI., 2013, Proceedings International Conference on Residual Stresses 9. Kurz, S. J. B., Mittemeijer, E. J. & Scholtes, B. (eds.). Pfaffikon, Switzerland: Trans Tech Publications, p. 597-604 8 p. (Materials Science Forum; vol. 768-769).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  68. Evolution of the microstructural surface characteristics during annealing.

    Gomes, E., Verbeken, K., Gautam, JP. & Kestens, LAI., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 561, p. 312-316 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Influence of finishing rolling variables on the austenite recrystallization and grain growth.

    Carretero Olalla, V., Sanchez Mouriño, N., Thibaux, P., Kestens, LAI. & Petrov, RH., 2013, In : Materials Science Forum. 753, p. 439-443 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Measurement and characterization of thermo-mechanical fatigue in compacted graphite iron.

    Ghodrat, S., Riemslag, AC., Janssen, M., Sietsma, J. & Kestens, LAI., 2013, In : International Journal of Fatigue. 48, p. 319-329 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. Microstructure and properties of ultrafast annealed high strength steels.

    Petrov, RH., Hajy Akbary, F., Saz, FR., Sidor, J., Santofimia Navarro, MJ., Sietsma, J. & Kestens, LAI., 2013, In : Materials Science Forum. 753, p. 554-558 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Volume expansion of compacted graphite iron induced by pearlite decomposition and the effect of oxidation at elevated temperature.

    Ghodrat, S., Janssen, M., Kestens, LAI. & Sietsma, J., 2013, In : Oxidation of Metals. 80, 1-2, p. 161-176 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. 2012
  74. Effect of heat treatment on fracture during bending in AA6016 aluminium alloy sheets

    Davidkov, A., Petrov, RH., de Smet, P. & Kestens, LAI., 2012, Advances in fracture and damage mechanics. Tonkovic, Z. & Aliabadi, MH. (eds.). s.l.: s.n., p. 521-524 4 p. (Key Engineering Materials; vol. 2012).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  75. Effects of holding time on thermo-mechanical fatigue properties of compacted graphite iron through tests with notched specimens

    Ghodrat, S., Riemslag, AC., Kestens, LAI., Petrov, RH., Janssen, M. & Sietsma, J., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 5, p. 2121-2130 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. In-situ texture measurements by synchrotron radiation of trip steel during an austempering treatment

    Petrov, RH., Leon Garcia, O., Sharma, O., Lee, H., Offerman, SE. & Kestens, LAI., 2012, In : Materials Science Forum. 702-703, p. 511-514 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Microstructural features of oxidation induces volume change of compacted graphite iron at elevated temperature annealing

    Ghodrat, S., Janssen, M., Kestens, LAI. & Sietsma, J., 2012, In : Oxidation of Metals. 79, 3/4

    Research output: Contribution to journalArticleScientificpeer-review

  78. Microstructure controlled thermo-mechanical fatigue of compacted graphite iron for engine blocks.

    Ghodrat, S., Janssen, M., Sietsma, J., Petrov, RH. & Kestens, LAI., 2012, Delft: Delft University of Technology. 14 p.

    Research output: Book/ReportReportProfessional

  79. Miocrostructural evolution of compacted graphite iron under thermo-mechanical fatigue conditions.

    Ghodrat, S., Janssen, M., Petrov, RH., Kestens, LAI. & Sietsma, J., 2012, In : Advanced Materials Research. 409, p. 757-762 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Modeling the magnetic properties of non-oriented electrical steels based on microstructural parameters

    Pirgazi, H., Petrov, RH. & Kestens, LAI., 2012, Textures of materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 734-737 4 p. (Materials Science Forum; vol. 2012).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  81. Recrystallization texture of ferrite steels: beyond the gamma-fibre

    Gobernado Hernandez, P., Petrov, RH., Moerman, J., Barbatti, C. & Kestens, LAI., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 790-793 4 p. (Materials Science Forum; vol. 2012).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  82. Recrystallization textures in aluminum alloys experimental study and modelling

    Sidor, JJ., Petrov, RH. & Kestens, LAI., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 611-614 4 p. (Materials Science Forum; vol. 2012).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  83. Recrystallized {311}h136i orientation in ferrite steels

    Gobernado, P., Petrov, RH. & Kestens, LAI., 2012, In : Scripta Materialia. 66, 9, p. 623-626 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Texture control in steel and aluminium alloys by rolling and recrystallization in non-conventional sheet manufacturing.

    Kestens, LAI., Sidor, J., Petrov, RH. & Nguyen Minh, T., 2012, In : Materials Science Forum. 715-716, p. 89-95 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Texture evolution during asymetrical warm rolling and subsequent annealing of electrical steel.

    Nguyen Minh, T., Sidor, J., Petrov, R. & Kestens, L., 2012, In : Materials Science Forum. 702-703, p. 758-761 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Texture formation in high strength low alloy steel reheated with ultrafast heating rates

    Petrov, RH., Sidor, J. & Kestens, LAI., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 798-801 4 p. (Materials Science Forum; vol. 2012).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  87. Ultra-Fast Annealing of High Strength Steel

    Petrov, RH., Hajy Akbary, F., Sidor, J., Santofimia, MJ., Sietsma, J. & Kestens, LAI., 2012, In : International Virtual Journal of Machines, Technologies, Materials, Scientific-technical Union of Mechanical Engineering, Bulgaria, Sofia. 2012, 8, p. 68-71 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Yield strength anisotropy of steel sheet induced by grain shape and crystal anisotropy

    Kestens, LAI., Sanchez, N., Decroos, K. & Petrov, R., 2012, Textures of Materials. Tewari, A., Suwas, S., Srivastava, D., Samajdar, I. & Haldar, A. (eds.). s.l.: s.n., p. 419-426 8 p. (Materials Science Forum; vol. 2012).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  89. 2011
  90. Heterogeneous phase transformation texture evolution in low alloyed ULC steel sheets.

    Gautam, JP., Petrov, RH., Leunis, E. & Kestens, LAI., 2011, In : Steel Research International. 82, 8, p. 881-885 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Microstructural and texture changes in severely deformed aluminium alloys.

    Sidor, J., Petrov, RH. & Kestens, LAI., 2011, In : Materials Characterization. 62, 2, p. 228-236 9 p.

    Research output: Contribution to journalArticleScientific

  92. Microstructural changes after control rolling and interrupted accelerated cooling simulations in pipeline steel.

    Sanchez-Mouriño, N., Petrov, RH., Bae, J-H., Kim, K. & Kestens, LAI., 2011, In : Steel Research International. 82, 4, p. 352-361 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Microstructure and hemming properties of AA6016 aluminium alloy sheets.

    Davidkov, A., Petrov, RH., Bliznuk, V., Ratchev, P., de Smet, P., Schepers, B. & Kestens, LAI., 2011, In : Key Engineering Materials. 465, p. 451-454 4 p.

    Research output: Contribution to journalArticleScientific

  94. Microstructure controlled bending response in AA6016 Al alloys.

    Davidkov, A., Petrov, RH., de Smet, P., Schepers, B. & Kestens, LAI., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 7068-7076 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Modeling the crystallographic texture changes in aluminium alloys during recrystallization.

    Sidor, J., Petrov, RH. & Kestens, LAI., 2011, In : Acta Materialia. 59, 14, p. 5735-5748 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Modelling and characterisation of the texture development in the fusion zone of an austenitic weld

    Decroos, K., Seefeldt, M., Ohms, C., Petrov, RH., Verhaeghe, F. & Kestens, LAI., 2011, In : Steel Research International. 82, 8, p. 911-917 7 p.

    Research output: Contribution to journalArticleScientific

  97. Strain localizations in ultra low carbon steel: Exploring the role of dislocations.

    Khatirkar, R., Mani Krishna, KV., Kestens, LAI., Petrov, RH., Pant, P. & Samajdar, I., 2011, In : ISIJ International. 51, 5, p. 849-856 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. 2010
  99. 3D-microstructure and texture characterization after "in-situ" and "ex-situ" sample preparation.

    Petrov, RH., León García, O., Sharma, H. & Kestens, LAI., 2010, Proceedings of the 31st Risø International Symposium on Materials Science: Challenges in Materials Science and Possibilities in 3D and 4D Characterization Techniques.. Hansen, N., Juul Jensen, D., Nielsen, SF., Poulsen, HF. & Ralph, B. (eds.). Roskilde, Denmark: Technical University of Denmark, p. 383-390 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  100. A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Yan, W., Yang, K., San Martin, D., van der Zwaag, S. & Kestens, LAI., 2010, In : Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Deformation, recrystallization and plastic anisotropy of asymmetrically rolled aluminium sheets.

    Sidor, J., Petrov, RH. & Kestens, LAI., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, 1, p. 413-424 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Effect of particles on texture banding in an aluminium alloy.

    Bennett, TA., Petrov, RH., Kestens, LAI., Zhuang, LZ. & de Smet, P., 2010, In : Scripta Materialia. 62, p. 78-81 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  103. Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by ni3ti intermetallic nanprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Wang, W., Bliznuk, V., Kestens, LAI. & van der Zwaag, S., 2010, In : Acta Materialia. 58, 10, p. 3582-3593 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  104. Mechanical and forming properties of AA6xxx sheet from room to warm temperature.

    Miroux, AG., Ghosh, M., Kurukuri, S., Kestens, LAI. & van den Boogaard, A., 2010, Proceedings of the 12th International Conference on Aluminium Alloys.. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Tokyo, Japan: The Japan institute of Light Metals, p. 1243-1248 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  105. Microstructure and texture optimization in Fe-Si ferritic steels.

    Gobernado Hernandez, P., Petrov, RH., Ruiz, D., Leunis, E. & Kestens, LAI., 2010, In : Materials Science Forum. 638-642, p. 2829-2834 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  106. Nucleation and growth of surface texture during alpha-gamma-alpha transformation in ultra low carbon steel alloyed with Mn, Al and Si.

    Gautam, JP., Petrov, RH., Kestens, LAI. & Leunis, E., 2010, In : Solid State Phenomena. 160, p. 223-228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  107. Roping phenomena in aluminium alloy 6016: A microtextural investigation.

    Bennett, TA., Sidor, J., Petrov, RH. & Kestens, LAI., 2010, In : Materials Science Forum. 638-642, p. 396-400 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  108. Surface microstructure and texture evolution during interrupted annealing in ultra low carbon steels.

    Gautam, JP., Petrov, RH., Kestens, LAI. & Leunis, E., 2010, In : Advanced Materials Research. 89-91, p. 202-207 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  109. Surface microstructure evolutions during phase transformation on Mn, Al and Si alloyed ultra low carbon steel.

    Gautam, JP., Petrov, RH., Kestens, LAI. & Leunis, E., 2010, In : Defect and Diffusion Forum. 297-301, p. 757-763 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  110. Surface texture modification for improved roping behaviour of aluminium alloy 6016.

    Bennett, TA., Petrov, RH. & Kestens, LAI., 2010, In : Solid State Phenomena. 160, p. 197-202 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  111. Texture Evolution in Si-alloyed ultra low-carbon steels after severe plastic deformation.

    Gobernado Hernandez, P., Petrov, RH., Leunis, E. & Kestens, LAI., 2010, In : Advanced Engineering Materials. 12, 10, p. 1077-1081 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  112. Texture control in non-oriented electrical steels by severe plastic deformation.

    Kestens, LAI., Petrov, RH., Gobernado Hernandez, P. & Leunis, E., 2010, In : Solid State Phenomena. 160, p. 23-29 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  113. Texture dependent mechanical anisotropy of X80 pipeline steel.

    Mourino, NS., Petrov, RH., Bae, J-H., Kim, K. & Kestens, LAI., 2010, In : Advanced Engineering Materials. 12, 10, p. 973-980 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  114. The effect of cooling rate on the damage micromechanisms of DP steels.

    Leon García, O., Petrov, RH. & Kestens, LAI., 2010, In : Materials Science Forum. 638-642, p. 3337-3342 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  115. The effect of intermediate annealing on texture banding in aluminium alloy 6016.

    Bennett, TA., Sidor, J., Petrov, RH. & Kestens, LAI., 2010, In : Advanced Engineering Materials. 12, 10, p. 1018-1023 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  116. The effect of particle-stimulated nucleation on texture banding in an aluminium alloy.

    Bennett, TA., Petrov, RH., Kestens, LAI., Zhuang, LZ. & de Smet, P., 2010, In : Scripta Materialia. 63, p. 461-464 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  117. Void initiation at TiN precipitates in IF steels during tensile deformation.

    Leon García, O., Petrov, RH. & Kestens, LAI., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 527, p. 4202-4209 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  118. 2009
  119. 3D-microstructural and texture characterization in different length scales.

    Petrov, RH., Gobernado Hernandez, P., León García, O., Sharma, H. & Kestens, LAI., 2009, Applications of Texture Analysis, Ceramic Transactions Volume 201. Rollet, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 197-204 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  120. Avoiding roping and ridging in AA6XXX sheets: characterizing the initial state.

    Bennett, TA., Petrov, RH. & Kestens, LAI., 2009, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollett, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 373-380 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  121. Controlled warm working: Possible tool for optimizing stored energy advantage in deformed gamma-fiber.

    Khatirkar, R., Kestens, LAI., Petrov, RH. & Samajdar, I., 2009, In : ISIJ International. 49, 1, p. 78-85 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  122. Deformation textures and plastic anisotropy of AA6xxx at warm temperatures.

    Ghosh, M., Miroux, AG., Sidor, J. & Kestens, LAI., 2009, Proceedings of the 2009 TMS Annual Meeting & Exhibition. Aluminium Alloys: Fabrication, Characterization and Applications II.. Yin, W., Das, SK. & Long, Z. (eds.). Warrendale, USA: The Minerals, Metals & Materials Society (TMS), p. 101-106 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  123. Direct observation of the twinning mechanism in an austenitic Fe-Mn-C steel.

    Bracke, L., Kestens, LAI. & Penning, J., 2009, In : Scripta Materialia. 61, 2, p. 220-222 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  124. Microstructural and textural evolutions in a cold rolled high Mn TWIP steel.

    Verbeken, K., Bracke, L., Kestens, LAI. & Penning, J., 2009, Materials Processing and Texture, Ceramic Transactions Volume, 200. Rollett, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 341-348 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  125. Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steel.

    Bracke, L., Verbeken, K., Kestens, LAI. & Penning, J., 2009, In : Acta Materialia. 57, 2, p. 1512-1524 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  126. Origins of texture memory in steels.

    Hutchinson, WB. & Kestens, LAI., 2009, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollett, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 281-290 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  127. Poster: Effect of temperature on plastic anisotropy of AA6xxx sheets.

    Ghosh, M., Miroux, AG., Sidor, S. & Kestens, LAI., 2009.

    Research output: Contribution to conferencePosterProfessional

  128. Recrystallization texture development under various thermo-mechanical conditions in aluminium alloys.

    Sidor, J., Kestens, LAI., Miroux, AG. & Petrov, RH., 2009, Light Metals 2009. Bearne, G. (ed.). Warrendale, PA, USA: The Minerals, Metals & Materials Society, p. 1221-1224 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  129. Relative preference for strain localizations in ultra low carbon steel.

    Khatirkar, R., Kestens, LAI., Petrov, RH. & Samajdar, I., 2009, Materials Processing and Texture, Ceramic Transactions, Volume 200. Rollet, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 217-221 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  130. Texture and microstructure evolution at the metal-vapor interface during transformation annealing in a Mn and Al alloyed ultra low carbon steel.

    Kestens, LAI., Gautam, JP. & Petrov, RH., 2009, Proceedings of the Conference on Microstructure and Texture in Steels and other Materials. Haldar, A., Suwas, S. & Bhattarcharjee, D. (eds.). London, United Kingdom: Springer, p. 103-109 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  131. Texture control in manufacturing current and future grades of low-carbon steel sheet.

    Kestens, LAI. & Petrov, RH., 2009, Materials Processing and Texture, Ceramic Transactions, Volume 200. Rollet, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 207-216 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  132. Texture modification in asymmetrically rolled aluminium sheets.

    Sidor, J., Petrov, RH., Miroux, AG. & Kestens, LAI., 2009, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollett, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 547-554 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  133. Texture-induced surface roping in an automotive aluminium sheet.

    Bennett, TA., Petrov, RH. & Kestens, LAI., 2009, In : Scripta Materialia. 61, p. 733-736 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  134. The effect of grain and phase boundary misorientation on nucleation during solid-state phase transformations in a Co-15Fe alloy.

    Landheer, H., Offerman, SE., Kestens, LAI., Takeuchi, T., Enomoto, M. & Adachi, Y., 2009, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollett, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 305-311 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  135. The role of Mg in void formation during plastic deformation of AA6016 aluminium alloys.

    León García, O., Petrov, RH. & Kestens, LAI., 2009, Proceedings of the 12th International Conference on Fracture (ICF 12). s.n. (ed.). Ottawa, Canada: s.n., p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  136. The role of crystal misorientations during solid-state nucleation of ferrite in austenite.

    Landheer, H., Offerman, SE., Petrov, RH. & Kestens, LAI., 2009, In : Acta Materialia. 57, 5, p. 1486-1496 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  137. 2008
  138. An age hardening model for interrupted ageing of the alloy AA6061.

    Bahrami, A., Miroux, AG. & Kestens, LAI., 2008, Metal Forming 2008. Pietrzyk, M., Kusiak, J., Harttley, P., Lin, J. & Mori, K. (eds.). Düsseldorf, Germany: Verlag Stahleisen GmbH, p. 224-231 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  139. An age-hardening model for the interrupted ageing of the alloy AA6061.

    Miroux, AG., Bahrami, A., Risanti, DD., Rivera Diaz del Castillo, PEJ. & Kestens, LAI., 2008, Proceedings of the 12th International Conference on Metal Forming.. Pietrzyk, M., Kusiak, J., Majta, J., Hartley, P., Lin, J. & Mori, K. (eds.). Dusseldorf, Germany: Verlag Stahleisen GmbH, p. 224-231 8 p. (Steel Research International; vol. 2).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  140. Changes in deformation texture and plastic anisotropy with temperature for AA6016.

    Ghosh, M., Miroux, AG. & Kestens, LAI., 2008, Proceedings of the International Symposium for Research Scholars on Metallurgy, Materials Science and Engineering (ISRS-2008). s.n. (ed.). Chennai, India: Indian institute of technology, p. 165-170 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  141. Characterizing the microstructure in AA6016 exhibiting roping.

    Bennett, TA., Zhuang, LZ., Ratchev, P., Petrov, RH. & Kestens, LAI., 2008, Proceedings of ICAA 11. Hirsch, J., Skrotzki, B. & Gottstein, G. (eds.). Weinheim, Germany: Wiley-VCH, p. 1803-1808 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  142. Controlling the plastic anisotropy in asymmetrically rolled aluminium sheets.

    Sidor, J., Miroux, AG., Petrov, RH. & Kestens, LAI., 2008, In : Philosophical Magazine (London, 2003). p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  143. Deformation and recrystallization texture control in 6016 Al alloy.

    Sidor, J., Kestens, LAI., Petrov, RH., Miroux, AG., Zhuang, LZ., van der Winden, MR., de Smet, P. & Ratchev, P., 2008, Proceedings of ICAA 11. Hirsch, J., Skrotzki, B. & Gottstein, G. (eds.). Weinheim, Germany: Wiley-VCH, p. 1149-1155 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  144. Effect of asymmetric rolling on texture and anisotropy of AA6061 alloy for automotive applications.

    Sidor, J., Zhuang, L., van der Winden, MR. & Kestens, LAI., 2008, Proceedings of the TMS 2008 Conference. Yin, Y. & Das, SK. (eds.). Warrendale, PA, USA: TMS - Minerals, Metals & Materials Society, p. 113-118 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  145. Local characterization of void initiation on IF steel by FIB-EBSD technique.

    León García, O., Petrov, RH. & Kestens, LAI., 2008, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollet, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 693-700 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  146. Microstructural and crystallographic aspects of conventional and asymmetric rolling processes.

    Sidor, J., Miroux, AG., Petrov, RH. & Kestens, LAI., 2008, In : Acta Materialia. 56, p. 2495-2507 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  147. Microstructural control during ageing of extruded AA6xxx for forming and crash application. NIMR scientific project report 2007.

    Bahrami, A., Miroux, AG. & Kestens, LAI., 2008, Delft: Technische Universiteit Delft. 6 p.

    Research output: Book/ReportReportProfessional

  148. Microstructure dependence of Charpy impact toughness anisotropy for steel grades API-80 and API-X70.

    Sanchez, N., Petrov, RH., Bae, J-H. & Kestens, LAI., 2008, Proceedings of the 3rd International Conference of Thermo-Mechanical Processing of Steels.. s.n. (ed.). Padua, Italy: Associazione Italiana di Metallurgia, p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  149. Microstructure evolution and mechanical properties of AA1100 aluminium sheet processed by accumulative roll bonding.

    Pirgazi, H., Akbarzadeh, A., Petrov, RH., Sidor, J. & Kestens, LAI., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 497, 1-2, p. 132-138 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  150. Nucleation and variant selection of secondary alpha plates in a beta Ti alloy.

    van Bohemen, SMC., Kamp, A., Petrov, RH., Kestens, LAI. & Sietsma, J., 2008, In : Acta Materialia. 56, p. 5907-5914 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  151. On the mechanisms of temperature-dependent precipitation in Al-Mg-Si alloys during multi-step ageing.

    Miroux, AG., Bahrami, A., Risanti, DD., Rivera Diaz del Castillo, PEJ. & Kestens, LAI., 2008, Aluminium alloys, their physical and mechanical properties.. Hirsch, J., Skrotzi, B. & Gottstein, G. (eds.). Weinheim, Germany: Wiley-VCH, p. 975-980 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  152. Surface energy controlled alpha-gamma transformation texture and microstructure character study in ULC steels alloyed with Mn and Al.

    Gautam, JP., Petrov, RH., Kestens, LAI. & Leunis, E., 2008, In : Journal of Materials Science. 43, 11, p. 3969-3975 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  153. Textural changes after warm temperature forming of AA6xxx.

    Ghosh, M., Miroux, AG., Werkhoven, R., Bolt, PJ., Sidor, J. & Kestens, LAI., 2008, Aluminium Alloys, Proceedings of the 11th International Conference on Aluminium Alloys.. Hirsch, J., Skrotski, B. & Gottstein, G. (eds.). Weinheim, Germany: Wiley-VCH, p. 782-787 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  154. Texture evolution of AA3003 aluminium alloy sheet produced by accumulative roll bonding.

    Pirgazi, H., Akbarzadeha, A., Petrov, RH., Sidor, J. & Kestens, LAI., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 492, p. 110-117 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  155. 2007
  156. 3D microstructural and texture characterization by means of focused ion beam microscope and integrated EBSD system.

    Petrov, RH., León García, O. & Kestens, LAI., 2007, Proceedings of the 25th Jubilee International Scientific Conference MTF 2007. Tabakova, B., Dobrzev, P., Yankova, I., Dimitrova, R. & Saikova, B. (eds.). Sofia, Bulgaria: Publishing House Technical University, p. 34-39 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  157. A study of texture evolution during deformation and annealing in Fe 3wt.-% Si by orientation contrast microscopy.

    Calvillo, PR., Petrov, RH., Houbaert, Y. & Kestens, LAI., 2007, In : Materials Science Forum. 550, p. 539-544 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  158. Correlation between boundary energy and grain boundary character distribution in Fe-based polycrystals.

    Gobernado, P., Petrov, RH. & Kestens, LAI., 2007, In : Materials Science Forum. 558-559, p. 879-884 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  159. Deformation and damage evolution of the microstructure around Ti-particles in IF steel during tensile deformation.

    León García, O., Petrov, RH. & Kestens, LAI., 2007, In : Key Engineering Materials. 348-349, p. 173-176 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  160. Factors affecting texture memory appearing through alpha-gamma-alpha transformation in IF steels.

    Yoshinaga, N., Inoue, H., Kawasaki, K., Kestens, LAI. & De Cooman, BC., 2007, In : Materials Transactions. 48, 8, p. 2036-2042 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  161. Formation of microstructure and texture in intercritically rolled C-Mn steel.

    Petrov, RH., Kestens, LAI. & Houbaert, Y., 2007, In : Materials Science Forum. 539-543, p. 4363-4368 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  162. In-situ observation of texture changes during phase transformations in ultra-low-carbon steel.

    Wenk, H-R., Huensche, I. & Kestens, LAI., 2007, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 38A, p. 261-267 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  163. Influence of annealing treatments on twins in magnesium alloy AZ31.

    Backx, P., Petrov, RH. & Kestens, LAI., 2007, In : Materials Science Forum. 550, p. 375-380 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  164. Microstructure - Texture related toughness anisotropy of API-X80 pipeline steel characterized by means of 3D-EBSD technique.

    Petrov, RH., León García, O., Sanchez-Mouriño, N., Kestens, LAI., Bae, J-H. & Kang, KB., 2007, In : Materials Science Forum. 558-559, p. 1429-1434 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  165. Microstructure and microtexture evolution of a TRIP-assisted steel after small deformation studied by EBSD technique.

    Petrov, RH., Kestens, LAI. & Houbaert, Y., 2007, In : Materials Science Forum. 550, p. 265-270 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  166. Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique.

    Petrov, RH., Kestens, LAI., Wasilkowska, A. & Houbaert, Y., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 447, p. 285-297 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  167. Microstructure-texture related toughness anisotropy of API-X80 pipeline steel.

    León García, O., Petrov, RH., Bae, J-H., Kestens, LAI. & Kang, KB., 2007, In : Advanced Materials Research. 15-17, p. 840-845 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  168. On the effect of texture in experimental grades of high-silicon electrical steel.

    Houbaert, Y., Ros-Yanez, T., Calvillo, PR., Barros Lorenzo, J. & Kestens, LAI., 2007, In : Materials Science Forum. 539-543, p. 3341-3346 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  169. Orientation selection in ULC steel during thermally activated phenomena induced by cold deformation.

    Verbeken, K. & Kestens, LAI., 2007, In : Materials Science Forum. 550, p. 491-496 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  170. Physical metallurgical aspects of texture control by thermomechanical processing of low-carbon steel sheet.

    Kestens, LAI. & Petrov, RH., 2007, In : Materials Science Forum. 558-559, p. 835-841 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  171. Recrystallization and spheroidization behavior of high carbon pearlitic steels investigated by means of orientation imaging microscopy.

    Lee, K., Kestens, LAI. & Kim, G., 2007, In : Materials Science Forum. 539-543, p. 4556-4561 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  172. Recrystallization behaviour of an austenitic high Mn steel.

    Bracke, L., Verbeken, K., Kestens, LAI. & Penning, J., 2007, In : Materials Science Forum. 558-559, p. 137-142 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  173. Structural dependence of grain boundary energy in Fe-based polycrystals identified by OIM measurements.

    Gobernado, P. & Kestens, LAI., 2007, In : Materials Science Forum. 550, p. 411-416 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  174. Surface texture evolution during alpha-gamma-alpha transformation in Mn and Al alloyed ultra-low carbon steel.

    Gautam, JP., Petrov, RH. & Kestens, LAI., 2007, In : Materials Science Forum. 550, p. 503-508 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  175. Texture evolution of tertiary oxide scale during steel plate finishing hot rolling simulation tests.

    Suarez, L., Petrov, RH., Kestens, LAI., Lamberigts, M. & Houbaert, Y., 2007, In : Materials Science Forum. 550, p. 557-562 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  176. The evolution of texture and stored energy during recrystallization of IF high strength steel investigated by means of orientation imaging microscopy.

    Lee, K., Kim, G., Chin, K-G. & Kestens, LAI., 2007, In : Materials Science Forum. 558-559, p. 241-246 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  177. The role of alpha/gamma orientation relationships during ferrite nucleation in an Fe-Cr-Ni alloy.

    Landheer, H., Offerman, SE., Petrov, RH. & Kestens, LAI., 2007, In : Materials Science Forum. 558-559, p. 1413-1418 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  178. The role of austenite grain misorientation on ferrite nucleation in an Fe-Cr-Ni alloy.

    Landheer, H., Offerman, SE., Petrov, RH. & Kestens, LAI., 2007, In : Materials Science Forum. 550, p. 435-440 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  179. Three dimensional microstructure-microtexture characterisation of pipeline steel.

    Petrov, RH., León García, O., Mulders, JJL., Reis, ACC., Bae, J-H., Kestens, LAI. & Houbaert, Y., 2007, In : Materials Science Forum. 550, p. 625-630 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  180. Transformation mechanism of alpha-martensite in an austenitic Fe-Mn-C-N alloy.

    Bracke, L., Kestens, LAI. & Penning, J., 2007, In : Scripta Materialia. 57, p. 385-388 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  181. 2006
  182. A study of microstructural anisotropy of pipeline steel by means of 3D-EBSD.

    Petrov, RH., Leon Garcia, O., Kestens, LAI. & Houbaert, Y., 2006, Proceedings of the EBSD Users Meeting 2006. s.n. (ed.). Hindsgavl Castle, Denmark: Oxford Instruments HKL, p. 50-55 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  183. Grain refinement by high temperature plane-strain compression of Fe-2%Si steel.

    Calvillo, PR., Reis, ACC., Kestens, LAI. & Houbaert, Y., 2006, In : Materials Science Forum. 503-504, p. 977-982 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  184. Microstructural evolution of a commercial 0.04%C steel during batch annealing.

    Millan, JC., Rivas, AL., Cabrera, JM., Camero, S. & Kestens, LAI., 2006, In : Materials Science Forum. 509, p. 17-24 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  185. Microstructure and texture changes in a low-alloyed TRIP-aided steel induced by small plastic deformation.

    Wasilkowska, A., Petrov, RH., Kestens, LAI., Werner, EA., Krempaszky, C., Traint, S. & Pichler, A., 2006, In : ISIJ International. 46, 2, p. 302-309 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  186. Microstructure and texture determined toughness anisotropy in C-Mn steel.

    Petrov, RH., Kestens, LAI. & Houbaert, Y., 2006, In : Mashinostroene. 4-5, p. 67-70 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  187. Microstructure-texture related toughness anisotropy of API-X80 pipeline steel.

    Leon Garcia, O., Petrov, RH., Bae, JH., Kestens, LAI. & Kang, KB., 2006.

    Research output: Contribution to conferencePosterProfessional

  188. Study and texture evolution during deformation and annealing of an Fe3wt-%Si by orientation contrast microscopy.

    Calvillo, PR., Petrov, RH., Houbaert, Y. & Kestens, LAI., 2006.

    Research output: Contribution to conferencePosterProfessional

  189. Texture evolution of tertiary oxide scale during steel plate finishing hot rolling simulation tests.

    Suarez, L., Petrov, RH., Kestens, LAI., Lamberigts, M. & Houbaert, Y., 2006.

    Research output: Contribution to conferencePosterProfessional

  190. Transformation behaviors in intercritically annealed and as-hot rolled TRIP steels.

    Petrov, RH., Jonas, JJ. & Kestens, LAI., 2006, Proceedings of the Second Baosteel Biennial Academic Conference (BAC 2006). sn (ed.). Shanghai, China: bac2006, p. 319-325 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  191. 2005
  192. Alpha-gamma-alpha transformation texture formation at cold-rolled ultra low carbon steel surfaces.

    Yoshinaga, N., Kestens, LAI. & De Cooman, BC., 2005, In : Materials Science Forum. 495-497, p. 1267-1272 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  193. An orientation microscopy study of the martensite transformation in an Fe-3%Ni alloy.

    Petrov, RH. & Kestens, LAI., 2005, A collection of OIM TM Applications. sn (ed.). EDAX Inc., p. 61-67 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  194. Cross-sectional texture gradients in interstitial free steels processed by accumulated roll bonding.

    Reis, ACC. & Kestens, LAI., 2005, In : Solid State Phenomena. 105, p. 233-238 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  195. Dynamic recrystallization during compression of Mg-3%Al-1%Zn.

    Backx, P. & Kestens, LAI., 2005, In : Materials Science Forum. 495-497, p. 633-638 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  196. Effect of initial texture on the evolution of texture and stored energy during recrystallization of interstitial free steel.

    Lee, K., Kim, G. & Kestens, LAI., 2005, In : Materials Science Forum. 495-497, p. 357-362 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  197. Evaluation of stored energy after accumulative roll bonding of an interstitial-free steel by means of orientation microscopy data.

    Lee, K., Reis, ACC., Kim, G. & Kestens, LAI., 2005, In : Journal of Applied Crystallography. 38, 4, p. 668-674 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  198. Healing local instability by transformation.

    Zhao, L., Sietsma, J. & Kestens, LAI., 2005.

    Research output: Contribution to conferencePosterProfessional

  199. Lamellar subdivision during accumulative roll bonding of a titanium interstitial free steel.

    Reis, ACC., Kestens, LAI. & Houbaert, Y., 2005, In : Materials Science Forum. 495-497, p. 351-356 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  200. Nucleation of secondary recrystallization in ultra low carbon steel.

    Verbeken, K. & Kestens, LAI., 2005, In : Materials Science Forum. 495-497, p. 1189-1194 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  201. Re-evaluation of the Ibe-Lucke growth election experiment in a Fe-Si single crystal.

    Verbeken, K., Kestens, LAI. & Nave, MD., 2005, In : Acta Materialia. 53, 9, p. 2675-2682 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  202. The influence of crystallographic orientation on grain nucleation.

    Landheer, H., Offerman, SE., Sloof, WG., van der Pers, NM., Petrov, R. & Kestens, LAI., 2005.

    Research output: Contribution to conferencePosterProfessional

  203. The use of Rodrigues-Frank space for representing discrete misorientation distributions.

    Kestens, LAI., Verbeken, K., Decocker, R., Petrov, R., Gobernado, P. & Offerman, SE., 2005, In : Materials Science Forum. 495-497, p. 157-165 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  204. Toughness anisotropy in intercritically rolled steel plates.

    Petrov, R., Kestens, LAI. & Houbaert, Y., 2005, In : Materials Science Forum. 495-497, p. 1499-1504 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  205. Transformation and recrystallization textures associated with steel processing.

    Kestens, LAI. & Jonas, JJ., 2005, ASM Handbook "Metalworking: Bulk Forming". Semiatin, SL. (ed.). Ohio: ASM, p. 685-700 888 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  206. Ultra grain refinement and hardening of IF-steel during accumulative roll-bonding.

    Costa, ALM., Reis, ACC., Kestens, LAI. & Andrade, MS., 2005, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 406, 1-2, p. 279-285 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

ID: 157832