1. 1995
  2. Deeltjes oplossen tijdens homogeniseren van aluminium-legeringen

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1995, In : Materialen. 1, p. 25-28 4 p.

    Research output: Contribution to journalArticleScientific

  3. 1996
  4. Microstructuur en kinetiek tijdens het partieel gloeien van twee commerciële niet-hardbare aluminiumlegeringen

    Sontgerath, JAH., van Mourik, P., van der Zwaag, S. & Korevaar, BM., 1996, In : Materialen. 1, p. 21-27 7 p.

    Research output: Contribution to journalArticleScientific

  5. 1997
  6. Analytical approach to particle dissolution in a finite medium

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1997, In : Materials Science and Technology. 13, p. 308-312 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 1998
  8. 24 Months Progress Report. Periode 1-12-1997 t/m 31-5-1998.

    Schlögl, SM., van Leeuwen, Y., van der Giessen, E. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 10 p.

    Research output: Book/ReportReportProfessional

  9. A filiform corrosion and potentio-dynamic polarisation study of aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 1998, Proceedings of EUROCORR '98.. van der Weijde, DH. & de Wit, JHW. (eds.). p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  10. A mathematical model for the dissolution kinetics of Mg2Si-phases in Al-Mg-Si alloys during homogenisation under industrial conditions.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 254, p. 13-32 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. A statistical evaluation of the staircase and the ArcSin SQRT(P) method for determining the fatigue limit.

    Braam, JJ. & van der Zwaag, S., 1998, In : Journal of Testing and Evaluation. 26, 2, p. 125-131 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241-243, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization.

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Ferrite nucleation and growth in steel studied with neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  15. Filiform corrosie van gelakt aluminium: het effect van microstructurele variaties in het substraatoppervlak.

    Mol, JMC., van der Zwaag, S. & de Wit, JHW., 1998, Delft: Delft University of Technology. 9 p.

    Research output: Book/ReportReportProfessional

  16. Filiform corrosie van gelakt aluminium: het effect van microstructurele variaties in het substraatoppervlak. Zevende voortgangsrapportage.

    Mol, JMC., van der Zwaag, S. & de Wit, JHW., 1998, Delft: Delft University of Technology. 39 p.

    Research output: Book/ReportReportProfessional

  17. Improvement of hot rolled products by physical and mathematical modelling.

    Howe, A., Anelli, E., Bhadeshia, H., Garcia De Andres, C., Gutierrez, I., Hoogendoorn, T., Kaspar, R., Larburu, J. & van der Zwaag, S., 1998, THERMEC'97. International Conference on Thermomechanical Processing of Steels and other Materials1998.. p. 2015-2021 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  18. Intelligent processing in a hot rolling mill for structural steels.

    van der Wolk, PJ., Dorrepaal, C., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the RTA/AVT Panel workshop 1 on Intelligent Processing of High Performance Materials.. Brussels: AGARD, p. 6.1-6.6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. Kinetics of gamma to alpha phase transformation in Fe-Mn alloys containing low manganese.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Technology. 14, 1, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Modelling fracture in aluminium based metal matrix composites using a statistical approach.

    Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 1998, ECF12 - Fracture from Defects.. Brown, MW., Rios, de los, ER. & Miller, KJ. (eds.). Cradley Heath, UK.: Emas Publishing, p. 1375-1380 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  21. Modelling of an industrial extrusion process.

    Coolegem, G., van der Wolk, PJ., Sietsma, J. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 63 p.

    Research output: Book/ReportReportScientific

  22. Modelling of the thermal expansion and compression of Mn.

    Qui, C. & van der Zwaag, S., 1998, In : Journal of Physics and Chemistry of Solids. 59, 2, p. 167-174 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Modelling the CCT diagram of engineering steels using neural networks.

    van der Wolk, PJ., Dorrepaal, C. & van der Zwaag, S., 1998, Fourth International Conference on Engineering Applications of Neural Networks.. Bulsari, AB., Fernendez De Canete, J. & Kallio, S. (eds.). p. 609-612 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Modelling the austenite decomposistion in steel on a physical basis.

    van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). Trans Tech Publications, p. 27-38 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  25. Modelling the microstructural changes during the homogenisation of extrudable aluminium alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Journal of the Mechanical Behavior of Materials. 9, 2, p. 115-120 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  27. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  28. Phase transformation in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, J., Kop, TA., Sietsma, J. & van der Zwaag, S., 1998, EUROMECH-MECAMAT. 3rd European Mechanics Conference on Mechanics and Multi-Physics Processes in Solids.. Oxford, p. 372-380 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. Precipitation kinetics in Al6061 and in an Al6061-alumina particle composite.

    Chen, SP., Mussert, KM. & van der Zwaag, S., 1998, In : Journal of Materials Science. 33, p. 4477-4483 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Simulations of pro-eutectoid ferrite formation using a mixed control growth model.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, 1, p. 104-116 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Some observations on cyclic deformation structures in the high-strength commercial aluminium alloy AA7150.

    Hanlon, DN., Rainforth, WM. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2727-2736 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. The dissolution of a stoichiometric second phase in ternary alloys: A numerical analysis.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, p. 93-103 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. The effect of geometrical assumptions in modeling solid-state transformation kinetics.

    van Leeuwen, Y., Vooijs, S., Sietsma, J. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2925-2931 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. The effect of metalworking fluids on the gas-nitriding behavour of 31CrMoV9 steel.

    Pennings, B. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1215-1217 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. The effect of the austenisation temperature on the transformation kinetics of an Nb-containing steel.

    Kop, TA., Remijn, PGW., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). San Sebastian, p. 193-200 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  36. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, 15, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. The formability of spray-formed, high-chromium contenc, white cast iron.

    Hanlon, DN., Li, YH., Rainforth, WM., Sellars, CM. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1637-1640 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Volume changes in Fe-Cu and Fe-Co alloys during the austenite to ferrite phase transformatio.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  40. 1999
  41. 3D Neutron depolarization experiments on the gamma/alpha phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, ECNS99 Conference.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  42. A microstructural model for predicting hardness profiles of Fe-Cr alloys after nitriding.

    Braam, JJ. & van der Zwaag, S., 1999, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 79, 5, p. 1193-1206 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. An asymptotic solution for the dissolution of particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, PCC'99: workshop. Warsaw: PAN, p. 155-159 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  44. An asymptotic solution for the dissolution of particles in multi-component alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, Workshop on phase change with convection modelling and validation.. Kowalewski, TA., Stella, F., Banaszek, J. & Szmyd, JS. (eds.). Polskiej Akademii Nauk, Warsaw.: Publisher Instytut Podstawowych Problemow Techniki, p. 155-159 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  45. Assessment of constitutive equations in modelling the hot deformability of some overaged AlMgSi alloys with varying solute contents.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A266, p. 135-145 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Bainite transformation of low carbon Mn-Si TRIP-assisted multiphase steels: influence of silicon content on cementite precipitation and ausenite retention.

    Jacques, P., Girault, E., Catlin, T., Geerlofs, N., Kop, TA., van der Zwaag, S. & Delannay, F., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 273-275, p. 475-479 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Bestudering van de kinetiek van nucleatie- en groeiprocessen tijdens diffusionele transformaties in staal met behulp van neutronendepolarisatie.

    van Dijk, NH., Rekveldt, MT., Sietsma, J., te Velthuis, SGE. & van der Zwaag, S., 1999, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  48. Dissolution of beta particles in an Al-Mg-Si alloy during DSC runs.

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Dissolution of ß particles in an Al-Mg-Si alloy during DSC runs

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Effects of carbon concentration and cooling rate on continuous cooling transformations predicted by artificial neural network.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, In : Tetsu to Hagane. 39, 10, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Ferrite growth from austenite in C-Mn steels during continuous cooling.

    Qui, C., Sietsma, J. & van der Zwaag, S., 1999, In : Ironmaking & Steelmaking: processes, products and applications. 26, 3, p. 200-204 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Filiform corrosion of aluminium alloys. Publication in form of a video (8min): Introduction Filiform Corrosion and Project Overview.

    Mol, JMC., Heuvelman, N., Hinton, BRW., de Wit, JHW. & van der Zwaag, S., 1999

    Research output: Non-textual formDigital or Visual ProductsProfessional

  53. Filiforme corrosie op aluminium. Rapport naar aanleiding van een brainstormsessie op 17 juni 1999.

    Huisert, MHM., Mol, JMC., de Wit, JHW., van der Zwaag, S., van der Hoeven, J., van der Meer, W., van der Weijde, DH., van Westing, EPM., Meijers, SD. & Spoelstra, MB., 1999, Delft: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  54. Heat Treatment Science and Technology.

    van der Zwaag, S., 1999, Annual Report 1998 MIDEG.. p. 77-96 20 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

  55. Micromechanics for macroscopic lifetime optimisation, Annual report 1998.

    van der Zwaag, S., 1999, Delft: Delft University of Technology. 11 p.

    Research output: Book/ReportReportProfessional

  56. Neutron depolarisation study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Neutron depolarization study of phase transformations in steel.

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Phase transformations in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, Y., Kop, TA., Sietsma, J. & van der Zwaag, S., 1999, In : The European Physical Journal. Special Topics. 9, p. 401-409 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Secrets of steel revealed by neutrons.

    Schrauwers, A., te Velthuis, SGE., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1999, In : Delft Outlook. 1, p. 8-12 5 p.

    Research output: Contribution to journalArticleProfessional

  60. The effect of the composition on the bainite transformation temperatures: a statistical analysis.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, ATTT-ATW-Tagung: Bainitische und martensitische Umwandlungen.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  61. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 5 p.

    Research output: Book/ReportReportProfessional

  62. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 7 p.

    Research output: Book/ReportReportProfessional

  63. 2000
  64. "werkwijze en inrichting voor het bewerken van een metalen mand, plak of plaat, en daarmee vervaardigd product"

    van der Winden, MR. & van der Zwaag, S., 2000, IPC No. Aangevraagd door Hoogovens Corporate Services BV, Afd. Industriele Eigendom., Patent No. 1014424, Priority date 1 Jan 1800

    Research output: Patent

  65. "werkwijze voor de vervaardiging van een vervormingsstaal met goede vervormingseigenschappen en vervormingsstaal van een laag-koolstof kwaliteit"

    van der Zwaag, S., Krusemeijer, G. & Vegter, H., 2000, IPC No. Aangevraagd door Hoogovens Corporate Services BV, Afd. Industriele Eigendom., Patent No. PCT/NL99/00182, Priority date 1 Jan 1800

    Research output: Patent

  66. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. A filiform corrosion and potentiodynamic polarisation study of some aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, 7, p. 1629-1639 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. A flow stress model for the intercritical deformation of low-carbon steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, Modelling of metal rolling processes 3.. IOM communications, p. 268-279 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  70. A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys.

    Wits, JJ., Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 283, p. 234-241 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. A study on the effect of plastic deformation on the austenite-to-ferrite phase transformation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proceedings (2nd version) of J.J. Jonas Symposium on thermomechanical processing of steel.. p. 735-750 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  72. A three-dimensional model for the development of the microstructure in steel during slow cooling

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 2000, 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. A three-dimensional model for the development of the microstructure in steel during slow cooling.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. An inventory of numerical methods to model solid-state phase transformations in aluminium alloys: a literature review

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, Delft: Netherlands Institute for Metals Research. 42 p.

    Research output: Book/ReportReportScientific

  75. An investigation of the kinetics of the austenite to ferrite transformation from deformed austenite.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proc. Third International Conference on Modelling of Metal Rolling Processes.. London: Institute of Metals, p. 431-440 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  76. Aspect ratio of bainite in steels.

    Wang, J., van der Zwaag, S., Yang, Z. & Fang, HS., 2000, In : Materials Letters. 45, p. 228-234 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Comparion of experimental AA60663 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model.

    van de Langkruis, J., Lof, J., Kool, WH., van der Zwaag, S. & Huétink, J., 2000, In : Computational Materials Science. 18, p. 381-392 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Comparison of particle dissolution modules in AlStruc (Sintef) and Homog (TUDelft)

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, Delft: Netherlands Institute for Metals Research. 11 p.

    Research output: Book/ReportReportScientific

  79. Determination of martensite start temperature in engineering steels. Part I. Empirical relations describing the effect of steel chemistry.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 761-768 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Determination of martensite start temperature in engineering steels. Part II. Correlation between critical driving force and Ms temperature.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 769-776 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Determination of static softening after hot deformation by double hit compression experiments.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, THERMEC 2000 ¿ Proceedings International Conference on Processing and Manufacturing of Advanced materials.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  82. Effect of bainite reaction on austenite retention in Al containg TRIP steel.

    Wang, J. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 21 p.

    Research output: Book/ReportReportProfessional

  83. Effect of complex strain paths on hot deformation of aluminium alloys.

    Davenport, SB. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Jouffrey, B. & Svejcar, J. (eds.). p. 169-174 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  84. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 2000, 48, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 48, 5, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Influence of alloying elements and their interactions on the martensite start temperature.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, Microstructures, mechanical properties and processes - computer simulation and modelling.. Bréchet, Y. (ed.). Weinheim, Germany.: Wiley-VCH, p. 64-69 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  87. Linking plane strain compression tests on AA6063 to laboratory scale extrusion via constitutive equations.

    van de Langkruis, J., Bergwerf, R., van der Zwaag, S. & Kool, WH., 2000, Proc. Conf. on Aluminum Alloys: Their Physical and Mechanical Properties.. p. 565-570 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  88. Microstructure and texture development during and after intercritical rolling of LC-steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, 41st Mechanical working and steel processing conference proceedings.. Iron & Steel Society, p. 923-934 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  89. Modelling Mg2Si dissolution in an AA6063 alloy during preheating to the extrusion temperature.

    van de Langkruis, J., Kuijpers, NCW., Kool, WH., Vermolen, FJ. & van der Zwaag, S., 2000, Seventh International Aluminum Extrusion Technology Seminar & Exposition ET 2000.. p. 119-124 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  90. Modelling the austenite to ferrite phase transformation in low carbon steels in terms of the interface mobility.

    Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : ISIJ International. 40, 7, p. 713-718 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Monitoring precipitation kinetics in an Al-Mn-Mg-Cu alloy using thermoelectric powder and electrical resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Brechet, Y. (ed.). p. 90-95 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  92. Monitoring the precipitation reactions in a cold rolled Al-Mn-Mg-Cu alloy using thermoelectric power and resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2000, Proc. Conf. ICAA-7.. Starke Jr., EA., Sander Jr., TH. & Cassada, WA. (eds.). p. 933-938 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  93. On the influence of alloying elements on the bainite reaction in low alloy steels during continuous cooling.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, p. 4393-4404 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. On the mobility of the austenite-ferrite interface in Fe-Co and Fe-Cuu.

    Vooijs, S., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 31, p. 379-385 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Phase transformations and microstructural evolution in aluminium-containing TRIP steels.

    Zhao, L., Sietsma, J. & van der Zwaag, S., 2000, Steels and materials for power plants.. Neumann et al., P. (ed.). Weinheim: Wiley-VCH, p. 77-82 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  96. Significance of deformation mode in hot deformation.

    Davenport, SB., Todd, I. & van der Zwaag, S., 2000, Proc. conf. ICAA-7.. Starke, EA., Sander, TH. & Cassada, WA. (eds.). p. 443-448 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  97. The effect of a thermal treatment on the fracture toughness K1c of an Aluminium AA6061-Al2O3 metal matrix composite material.

    van der Zwaag, S., Mussert, KM., van Gorp, A. C., Duwel, AHC. & Bakker, A., 2000, Proc. Conf. ATTT-AWT Tagung Gefüge und daraus resultierende Bauteileigenschaften.. p. 111-115 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  98. The effect of a thermal treatment on the fracture toughness K1c of an aluminium AA6061-AI2O3 metal matrix composite material

    van der Zwaag, S., van Gorp, A. C., Mussert, KM., Duwal, A. & Bakker, A., 2000, Gefüge und daraus resultierende Bauteileigenschaften. Berichtsband der Deutsch-Französischen ATTT-AWT-Tagung vom 13./14. 4 2000 in Aachen. Bremen: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik, p. 111-115 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  99. The effect of grain geometry on the kinetics of recrystallisation processes.

    Chen, SP., van Leeuwen, Y., Davenport, SB., Hanlon, DN. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Brechet, Y. (ed.). p. 96-101 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  100. The modelling of the hardness of martensite after quenching using a neural network.

    van der Wolk, PJ. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 8 p.

    Research output: Book/ReportReportProfessional

  101. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  102. Wiskundige modellering van microsturcturele veranderingen tijdens het homogeniseren van aluminium

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, STW-2000 04 26-01. S.l.: s.n., p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

  103. 2001
  104. A critical appraisal of fracture toughness measurements on AA6061 and an Al203-particle reinforced AA6061 alloy for various heat treatments

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 Next

ID: 142717