1. 1995
  2. Deeltjes oplossen tijdens homogeniseren van aluminium-legeringen

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1995, In : Materialen. 1, p. 25-28 4 p.

    Research output: Contribution to journalArticleScientific

  3. 1996
  4. Microstructuur en kinetiek tijdens het partieel gloeien van twee commerciële niet-hardbare aluminiumlegeringen

    Sontgerath, JAH., van Mourik, P., van der Zwaag, S. & Korevaar, BM., 1996, In : Materialen. 1, p. 21-27 7 p.

    Research output: Contribution to journalArticleScientific

  5. 1997
  6. Analytical approach to particle dissolution in a finite medium

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1997, In : Materials Science and Technology. 13, p. 308-312 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 1998
  8. 24 Months Progress Report. Periode 1-12-1997 t/m 31-5-1998.

    Schlögl, SM., van Leeuwen, Y., van der Giessen, E. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 10 p.

    Research output: Book/ReportReportProfessional

  9. A filiform corrosion and potentio-dynamic polarisation study of aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 1998, Proceedings of EUROCORR '98.. van der Weijde, DH. & de Wit, JHW. (eds.). p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  10. A mathematical model for the dissolution kinetics of Mg2Si-phases in Al-Mg-Si alloys during homogenisation under industrial conditions.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 254, p. 13-32 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. A statistical evaluation of the staircase and the ArcSin SQRT(P) method for determining the fatigue limit.

    Braam, JJ. & van der Zwaag, S., 1998, In : Journal of Testing and Evaluation. 26, 2, p. 125-131 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241-243, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization.

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Ferrite nucleation and growth in steel studied with neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  15. Filiform corrosie van gelakt aluminium: het effect van microstructurele variaties in het substraatoppervlak.

    Mol, JMC., van der Zwaag, S. & de Wit, JHW., 1998, Delft: Delft University of Technology. 9 p.

    Research output: Book/ReportReportProfessional

  16. Filiform corrosie van gelakt aluminium: het effect van microstructurele variaties in het substraatoppervlak. Zevende voortgangsrapportage.

    Mol, JMC., van der Zwaag, S. & de Wit, JHW., 1998, Delft: Delft University of Technology. 39 p.

    Research output: Book/ReportReportProfessional

  17. Improvement of hot rolled products by physical and mathematical modelling.

    Howe, A., Anelli, E., Bhadeshia, H., Garcia De Andres, C., Gutierrez, I., Hoogendoorn, T., Kaspar, R., Larburu, J. & van der Zwaag, S., 1998, THERMEC'97. International Conference on Thermomechanical Processing of Steels and other Materials1998.. p. 2015-2021 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  18. Intelligent processing in a hot rolling mill for structural steels.

    van der Wolk, PJ., Dorrepaal, C., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the RTA/AVT Panel workshop 1 on Intelligent Processing of High Performance Materials.. Brussels: AGARD, p. 6.1-6.6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. Kinetics of gamma to alpha phase transformation in Fe-Mn alloys containing low manganese.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Technology. 14, 1, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Modelling fracture in aluminium based metal matrix composites using a statistical approach.

    Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 1998, ECF12 - Fracture from Defects.. Brown, MW., Rios, de los, ER. & Miller, KJ. (eds.). Cradley Heath, UK.: Emas Publishing, p. 1375-1380 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  21. Modelling of an industrial extrusion process.

    Coolegem, G., van der Wolk, PJ., Sietsma, J. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 63 p.

    Research output: Book/ReportReportScientific

  22. Modelling of the thermal expansion and compression of Mn.

    Qui, C. & van der Zwaag, S., 1998, In : Journal of Physics and Chemistry of Solids. 59, 2, p. 167-174 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Modelling the CCT diagram of engineering steels using neural networks.

    van der Wolk, PJ., Dorrepaal, C. & van der Zwaag, S., 1998, Fourth International Conference on Engineering Applications of Neural Networks.. Bulsari, AB., Fernendez De Canete, J. & Kallio, S. (eds.). p. 609-612 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Modelling the austenite decomposistion in steel on a physical basis.

    van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). Trans Tech Publications, p. 27-38 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  25. Modelling the microstructural changes during the homogenisation of extrudable aluminium alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Journal of the Mechanical Behavior of Materials. 9, 2, p. 115-120 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  27. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  28. Phase transformation in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, J., Kop, TA., Sietsma, J. & van der Zwaag, S., 1998, EUROMECH-MECAMAT. 3rd European Mechanics Conference on Mechanics and Multi-Physics Processes in Solids.. Oxford, p. 372-380 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. Precipitation kinetics in Al6061 and in an Al6061-alumina particle composite.

    Chen, SP., Mussert, KM. & van der Zwaag, S., 1998, In : Journal of Materials Science. 33, p. 4477-4483 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Simulations of pro-eutectoid ferrite formation using a mixed control growth model.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, 1, p. 104-116 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Some observations on cyclic deformation structures in the high-strength commercial aluminium alloy AA7150.

    Hanlon, DN., Rainforth, WM. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2727-2736 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. The dissolution of a stoichiometric second phase in ternary alloys: A numerical analysis.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, p. 93-103 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. The effect of geometrical assumptions in modeling solid-state transformation kinetics.

    van Leeuwen, Y., Vooijs, S., Sietsma, J. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2925-2931 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. The effect of metalworking fluids on the gas-nitriding behavour of 31CrMoV9 steel.

    Pennings, B. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1215-1217 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. The effect of the austenisation temperature on the transformation kinetics of an Nb-containing steel.

    Kop, TA., Remijn, PGW., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). San Sebastian, p. 193-200 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  36. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, 15, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. The formability of spray-formed, high-chromium contenc, white cast iron.

    Hanlon, DN., Li, YH., Rainforth, WM., Sellars, CM. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1637-1640 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Volume changes in Fe-Cu and Fe-Co alloys during the austenite to ferrite phase transformatio.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  40. 1999
  41. 3D Neutron depolarization experiments on the gamma/alpha phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, ECNS99 Conference.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  42. A microstructural model for predicting hardness profiles of Fe-Cr alloys after nitriding.

    Braam, JJ. & van der Zwaag, S., 1999, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 79, 5, p. 1193-1206 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. An asymptotic solution for the dissolution of particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, PCC'99: workshop. Warsaw: PAN, p. 155-159 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  44. An asymptotic solution for the dissolution of particles in multi-component alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, Workshop on phase change with convection modelling and validation.. Kowalewski, TA., Stella, F., Banaszek, J. & Szmyd, JS. (eds.). Polskiej Akademii Nauk, Warsaw.: Publisher Instytut Podstawowych Problemow Techniki, p. 155-159 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  45. Assessment of constitutive equations in modelling the hot deformability of some overaged AlMgSi alloys with varying solute contents.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A266, p. 135-145 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Bainite transformation of low carbon Mn-Si TRIP-assisted multiphase steels: influence of silicon content on cementite precipitation and ausenite retention.

    Jacques, P., Girault, E., Catlin, T., Geerlofs, N., Kop, TA., van der Zwaag, S. & Delannay, F., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 273-275, p. 475-479 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Bestudering van de kinetiek van nucleatie- en groeiprocessen tijdens diffusionele transformaties in staal met behulp van neutronendepolarisatie.

    van Dijk, NH., Rekveldt, MT., Sietsma, J., te Velthuis, SGE. & van der Zwaag, S., 1999, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  48. Dissolution of beta particles in an Al-Mg-Si alloy during DSC runs.

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Dissolution of ß particles in an Al-Mg-Si alloy during DSC runs

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Effects of carbon concentration and cooling rate on continuous cooling transformations predicted by artificial neural network.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, In : Tetsu to Hagane. 39, 10, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Ferrite growth from austenite in C-Mn steels during continuous cooling.

    Qui, C., Sietsma, J. & van der Zwaag, S., 1999, In : Ironmaking & Steelmaking: processes, products and applications. 26, 3, p. 200-204 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Filiform corrosion of aluminium alloys. Publication in form of a video (8min): Introduction Filiform Corrosion and Project Overview.

    Mol, JMC., Heuvelman, N., Hinton, BRW., de Wit, JHW. & van der Zwaag, S., 1999

    Research output: Non-textual formDigital or Visual ProductsProfessional

Previous 1 2 3 4 5 6 7 8 ...16 Next

ID: 142717