1. 1995
  2. Deeltjes oplossen tijdens homogeniseren van aluminium-legeringen

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1995, In : Materialen. 1, p. 25-28 4 p.

    Research output: Contribution to journalArticleScientific

  3. 1996
  4. Microstructuur en kinetiek tijdens het partieel gloeien van twee commerciële niet-hardbare aluminiumlegeringen

    Sontgerath, JAH., van Mourik, P., van der Zwaag, S. & Korevaar, BM., 1996, In : Materialen. 1, p. 21-27 7 p.

    Research output: Contribution to journalArticleScientific

  5. 1997
  6. Analytical approach to particle dissolution in a finite medium

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1997, In : Materials Science and Technology. 13, p. 308-312 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 1998
  8. 24 Months Progress Report. Periode 1-12-1997 t/m 31-5-1998.

    Schlögl, SM., van Leeuwen, Y., van der Giessen, E. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 10 p.

    Research output: Book/ReportReportProfessional

  9. A filiform corrosion and potentio-dynamic polarisation study of aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 1998, Proceedings of EUROCORR '98.. van der Weijde, DH. & de Wit, JHW. (eds.). p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  10. A mathematical model for the dissolution kinetics of Mg2Si-phases in Al-Mg-Si alloys during homogenisation under industrial conditions.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 254, p. 13-32 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. A statistical evaluation of the staircase and the ArcSin SQRT(P) method for determining the fatigue limit.

    Braam, JJ. & van der Zwaag, S., 1998, In : Journal of Testing and Evaluation. 26, 2, p. 125-131 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241-243, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization.

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Ferrite nucleation and growth in steel studied with neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  15. Filiform corrosie van gelakt aluminium: het effect van microstructurele variaties in het substraatoppervlak.

    Mol, JMC., van der Zwaag, S. & de Wit, JHW., 1998, Delft: Delft University of Technology. 9 p.

    Research output: Book/ReportReportProfessional

  16. Filiform corrosie van gelakt aluminium: het effect van microstructurele variaties in het substraatoppervlak. Zevende voortgangsrapportage.

    Mol, JMC., van der Zwaag, S. & de Wit, JHW., 1998, Delft: Delft University of Technology. 39 p.

    Research output: Book/ReportReportProfessional

  17. Improvement of hot rolled products by physical and mathematical modelling.

    Howe, A., Anelli, E., Bhadeshia, H., Garcia De Andres, C., Gutierrez, I., Hoogendoorn, T., Kaspar, R., Larburu, J. & van der Zwaag, S., 1998, THERMEC'97. International Conference on Thermomechanical Processing of Steels and other Materials1998.. p. 2015-2021 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  18. Intelligent processing in a hot rolling mill for structural steels.

    van der Wolk, PJ., Dorrepaal, C., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the RTA/AVT Panel workshop 1 on Intelligent Processing of High Performance Materials.. Brussels: AGARD, p. 6.1-6.6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  19. Kinetics of gamma to alpha phase transformation in Fe-Mn alloys containing low manganese.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Technology. 14, 1, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Modelling fracture in aluminium based metal matrix composites using a statistical approach.

    Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 1998, ECF12 - Fracture from Defects.. Brown, MW., Rios, de los, ER. & Miller, KJ. (eds.). Cradley Heath, UK.: Emas Publishing, p. 1375-1380 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  21. Modelling of an industrial extrusion process.

    Coolegem, G., van der Wolk, PJ., Sietsma, J. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 63 p.

    Research output: Book/ReportReportScientific

  22. Modelling of the thermal expansion and compression of Mn.

    Qui, C. & van der Zwaag, S., 1998, In : Journal of Physics and Chemistry of Solids. 59, 2, p. 167-174 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Modelling the CCT diagram of engineering steels using neural networks.

    van der Wolk, PJ., Dorrepaal, C. & van der Zwaag, S., 1998, Fourth International Conference on Engineering Applications of Neural Networks.. Bulsari, AB., Fernendez De Canete, J. & Kallio, S. (eds.). p. 609-612 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Modelling the austenite decomposistion in steel on a physical basis.

    van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). Trans Tech Publications, p. 27-38 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  25. Modelling the microstructural changes during the homogenisation of extrudable aluminium alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Journal of the Mechanical Behavior of Materials. 9, 2, p. 115-120 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  27. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  28. Phase transformation in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, J., Kop, TA., Sietsma, J. & van der Zwaag, S., 1998, EUROMECH-MECAMAT. 3rd European Mechanics Conference on Mechanics and Multi-Physics Processes in Solids.. Oxford, p. 372-380 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. Precipitation kinetics in Al6061 and in an Al6061-alumina particle composite.

    Chen, SP., Mussert, KM. & van der Zwaag, S., 1998, In : Journal of Materials Science. 33, p. 4477-4483 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Simulations of pro-eutectoid ferrite formation using a mixed control growth model.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, 1, p. 104-116 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Some observations on cyclic deformation structures in the high-strength commercial aluminium alloy AA7150.

    Hanlon, DN., Rainforth, WM. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2727-2736 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. The dissolution of a stoichiometric second phase in ternary alloys: A numerical analysis.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, p. 93-103 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. The effect of geometrical assumptions in modeling solid-state transformation kinetics.

    van Leeuwen, Y., Vooijs, S., Sietsma, J. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2925-2931 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. The effect of metalworking fluids on the gas-nitriding behavour of 31CrMoV9 steel.

    Pennings, B. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1215-1217 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. The effect of the austenisation temperature on the transformation kinetics of an Nb-containing steel.

    Kop, TA., Remijn, PGW., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). San Sebastian, p. 193-200 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  36. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, 15, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. The formability of spray-formed, high-chromium contenc, white cast iron.

    Hanlon, DN., Li, YH., Rainforth, WM., Sellars, CM. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1637-1640 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Volume changes in Fe-Cu and Fe-Co alloys during the austenite to ferrite phase transformatio.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  40. 1999
  41. 3D Neutron depolarization experiments on the gamma/alpha phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, ECNS99 Conference.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  42. A microstructural model for predicting hardness profiles of Fe-Cr alloys after nitriding.

    Braam, JJ. & van der Zwaag, S., 1999, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 79, 5, p. 1193-1206 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. An asymptotic solution for the dissolution of particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, PCC'99: workshop. Warsaw: PAN, p. 155-159 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  44. An asymptotic solution for the dissolution of particles in multi-component alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, Workshop on phase change with convection modelling and validation.. Kowalewski, TA., Stella, F., Banaszek, J. & Szmyd, JS. (eds.). Polskiej Akademii Nauk, Warsaw.: Publisher Instytut Podstawowych Problemow Techniki, p. 155-159 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  45. Assessment of constitutive equations in modelling the hot deformability of some overaged AlMgSi alloys with varying solute contents.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A266, p. 135-145 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Bainite transformation of low carbon Mn-Si TRIP-assisted multiphase steels: influence of silicon content on cementite precipitation and ausenite retention.

    Jacques, P., Girault, E., Catlin, T., Geerlofs, N., Kop, TA., van der Zwaag, S. & Delannay, F., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 273-275, p. 475-479 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Bestudering van de kinetiek van nucleatie- en groeiprocessen tijdens diffusionele transformaties in staal met behulp van neutronendepolarisatie.

    van Dijk, NH., Rekveldt, MT., Sietsma, J., te Velthuis, SGE. & van der Zwaag, S., 1999, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  48. Dissolution of beta particles in an Al-Mg-Si alloy during DSC runs.

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Dissolution of ß particles in an Al-Mg-Si alloy during DSC runs

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Effects of carbon concentration and cooling rate on continuous cooling transformations predicted by artificial neural network.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, In : Tetsu to Hagane. 39, 10, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Ferrite growth from austenite in C-Mn steels during continuous cooling.

    Qui, C., Sietsma, J. & van der Zwaag, S., 1999, In : Ironmaking & Steelmaking: processes, products and applications. 26, 3, p. 200-204 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Filiform corrosion of aluminium alloys. Publication in form of a video (8min): Introduction Filiform Corrosion and Project Overview.

    Mol, JMC., Heuvelman, N., Hinton, BRW., de Wit, JHW. & van der Zwaag, S., 1999

    Research output: Non-textual formDigital or Visual ProductsProfessional

  53. Filiforme corrosie op aluminium. Rapport naar aanleiding van een brainstormsessie op 17 juni 1999.

    Huisert, MHM., Mol, JMC., de Wit, JHW., van der Zwaag, S., van der Hoeven, J., van der Meer, W., van der Weijde, DH., van Westing, EPM., Meijers, SD. & Spoelstra, MB., 1999, Delft: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  54. Heat Treatment Science and Technology.

    van der Zwaag, S., 1999, Annual Report 1998 MIDEG.. p. 77-96 20 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

  55. Micromechanics for macroscopic lifetime optimisation, Annual report 1998.

    van der Zwaag, S., 1999, Delft: Delft University of Technology. 11 p.

    Research output: Book/ReportReportProfessional

  56. Neutron depolarisation study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Neutron depolarization study of phase transformations in steel.

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Phase transformations in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, Y., Kop, TA., Sietsma, J. & van der Zwaag, S., 1999, In : The European Physical Journal. Special Topics. 9, p. 401-409 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Secrets of steel revealed by neutrons.

    Schrauwers, A., te Velthuis, SGE., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1999, In : Delft Outlook. 1, p. 8-12 5 p.

    Research output: Contribution to journalArticleProfessional

  60. The effect of the composition on the bainite transformation temperatures: a statistical analysis.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, ATTT-ATW-Tagung: Bainitische und martensitische Umwandlungen.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  61. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 5 p.

    Research output: Book/ReportReportProfessional

  62. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 7 p.

    Research output: Book/ReportReportProfessional

  63. 2000
  64. "werkwijze en inrichting voor het bewerken van een metalen mand, plak of plaat, en daarmee vervaardigd product"

    van der Winden, MR. & van der Zwaag, S., 2000, IPC No. Aangevraagd door Hoogovens Corporate Services BV, Afd. Industriele Eigendom., Patent No. 1014424, Priority date 1 Jan 1800

    Research output: Patent

  65. "werkwijze voor de vervaardiging van een vervormingsstaal met goede vervormingseigenschappen en vervormingsstaal van een laag-koolstof kwaliteit"

    van der Zwaag, S., Krusemeijer, G. & Vegter, H., 2000, IPC No. Aangevraagd door Hoogovens Corporate Services BV, Afd. Industriele Eigendom., Patent No. PCT/NL99/00182, Priority date 1 Jan 1800

    Research output: Patent

  66. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. A filiform corrosion and potentiodynamic polarisation study of some aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, 7, p. 1629-1639 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. A flow stress model for the intercritical deformation of low-carbon steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, Modelling of metal rolling processes 3.. IOM communications, p. 268-279 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  70. A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys.

    Wits, JJ., Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 283, p. 234-241 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. A study on the effect of plastic deformation on the austenite-to-ferrite phase transformation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proceedings (2nd version) of J.J. Jonas Symposium on thermomechanical processing of steel.. p. 735-750 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  72. A three-dimensional model for the development of the microstructure in steel during slow cooling

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 2000, 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. A three-dimensional model for the development of the microstructure in steel during slow cooling.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. An inventory of numerical methods to model solid-state phase transformations in aluminium alloys: a literature review

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, Delft: Netherlands Institute for Metals Research. 42 p.

    Research output: Book/ReportReportScientific

  75. An investigation of the kinetics of the austenite to ferrite transformation from deformed austenite.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proc. Third International Conference on Modelling of Metal Rolling Processes.. London: Institute of Metals, p. 431-440 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  76. Aspect ratio of bainite in steels.

    Wang, J., van der Zwaag, S., Yang, Z. & Fang, HS., 2000, In : Materials Letters. 45, p. 228-234 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Comparion of experimental AA60663 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model.

    van de Langkruis, J., Lof, J., Kool, WH., van der Zwaag, S. & Huétink, J., 2000, In : Computational Materials Science. 18, p. 381-392 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Comparison of particle dissolution modules in AlStruc (Sintef) and Homog (TUDelft)

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, Delft: Netherlands Institute for Metals Research. 11 p.

    Research output: Book/ReportReportScientific

  79. Determination of martensite start temperature in engineering steels. Part I. Empirical relations describing the effect of steel chemistry.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 761-768 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Determination of martensite start temperature in engineering steels. Part II. Correlation between critical driving force and Ms temperature.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 769-776 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Determination of static softening after hot deformation by double hit compression experiments.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, THERMEC 2000 ¿ Proceedings International Conference on Processing and Manufacturing of Advanced materials.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  82. Effect of bainite reaction on austenite retention in Al containg TRIP steel.

    Wang, J. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 21 p.

    Research output: Book/ReportReportProfessional

  83. Effect of complex strain paths on hot deformation of aluminium alloys.

    Davenport, SB. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Jouffrey, B. & Svejcar, J. (eds.). p. 169-174 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  84. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 2000, 48, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 48, 5, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Influence of alloying elements and their interactions on the martensite start temperature.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, Microstructures, mechanical properties and processes - computer simulation and modelling.. Bréchet, Y. (ed.). Weinheim, Germany.: Wiley-VCH, p. 64-69 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  87. Linking plane strain compression tests on AA6063 to laboratory scale extrusion via constitutive equations.

    van de Langkruis, J., Bergwerf, R., van der Zwaag, S. & Kool, WH., 2000, Proc. Conf. on Aluminum Alloys: Their Physical and Mechanical Properties.. p. 565-570 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  88. Microstructure and texture development during and after intercritical rolling of LC-steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, 41st Mechanical working and steel processing conference proceedings.. Iron & Steel Society, p. 923-934 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  89. Modelling Mg2Si dissolution in an AA6063 alloy during preheating to the extrusion temperature.

    van de Langkruis, J., Kuijpers, NCW., Kool, WH., Vermolen, FJ. & van der Zwaag, S., 2000, Seventh International Aluminum Extrusion Technology Seminar & Exposition ET 2000.. p. 119-124 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  90. Modelling the austenite to ferrite phase transformation in low carbon steels in terms of the interface mobility.

    Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : ISIJ International. 40, 7, p. 713-718 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Monitoring precipitation kinetics in an Al-Mn-Mg-Cu alloy using thermoelectric powder and electrical resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Brechet, Y. (ed.). p. 90-95 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  92. Monitoring the precipitation reactions in a cold rolled Al-Mn-Mg-Cu alloy using thermoelectric power and resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2000, Proc. Conf. ICAA-7.. Starke Jr., EA., Sander Jr., TH. & Cassada, WA. (eds.). p. 933-938 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  93. On the influence of alloying elements on the bainite reaction in low alloy steels during continuous cooling.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, p. 4393-4404 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. On the mobility of the austenite-ferrite interface in Fe-Co and Fe-Cuu.

    Vooijs, S., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 31, p. 379-385 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Phase transformations and microstructural evolution in aluminium-containing TRIP steels.

    Zhao, L., Sietsma, J. & van der Zwaag, S., 2000, Steels and materials for power plants.. Neumann et al., P. (ed.). Weinheim: Wiley-VCH, p. 77-82 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  96. Significance of deformation mode in hot deformation.

    Davenport, SB., Todd, I. & van der Zwaag, S., 2000, Proc. conf. ICAA-7.. Starke, EA., Sander, TH. & Cassada, WA. (eds.). p. 443-448 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  97. The effect of a thermal treatment on the fracture toughness K1c of an Aluminium AA6061-Al2O3 metal matrix composite material.

    van der Zwaag, S., Mussert, KM., van Gorp, A. C., Duwel, AHC. & Bakker, A., 2000, Proc. Conf. ATTT-AWT Tagung Gefüge und daraus resultierende Bauteileigenschaften.. p. 111-115 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  98. The effect of a thermal treatment on the fracture toughness K1c of an aluminium AA6061-AI2O3 metal matrix composite material

    van der Zwaag, S., van Gorp, A. C., Mussert, KM., Duwal, A. & Bakker, A., 2000, Gefüge und daraus resultierende Bauteileigenschaften. Berichtsband der Deutsch-Französischen ATTT-AWT-Tagung vom 13./14. 4 2000 in Aachen. Bremen: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik, p. 111-115 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  99. The effect of grain geometry on the kinetics of recrystallisation processes.

    Chen, SP., van Leeuwen, Y., Davenport, SB., Hanlon, DN. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Brechet, Y. (ed.). p. 96-101 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  100. The modelling of the hardness of martensite after quenching using a neural network.

    van der Wolk, PJ. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 8 p.

    Research output: Book/ReportReportProfessional

  101. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  102. Wiskundige modellering van microsturcturele veranderingen tijdens het homogeniseren van aluminium

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, STW-2000 04 26-01. S.l.: s.n., p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

  103. 2001
  104. A critical appraisal of fracture toughness measurements on AA6061 and an Al203-particle reinforced AA6061 alloy for various heat treatments

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  105. A critical appraisal of fracture toughness measurements on AA6061 and an Al2O3 particle reinforced AA6061 alloy for various heat treatments.

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  106. A mathematical model of the morphological changes in aluminium extrusion alloys during homogenization.

    van Til, W., Vuik, C. & van der Zwaag, S., 2001, Delft: Delft University of Technology. 33 p.

    Research output: Book/ReportReportProfessional

  107. A study of hydrogen embrittlement in automotive fastener steels.

    Lonyuk, B., Hop, R., Hanlon, DN., van der Zwaag, S., Zuidema, J. & Bakker, A., 2001, Advances in Fracture Research, Proceedings on CD-rom of 10th International Conference on Fracture.. Ravi-Chandar, K. (ed.). p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  108. A study on the fracture toughness of Al-based MMCs containing different volume fractions Al2O3.

    Duwel, AHC., Mussert, KM., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Materials Science Letters. 20, p. 1147-1150 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  109. Advanced hot rolling practice and products for the production of hot rolled strips.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, . Joint ECSC-Steel NEST workshop advanced hot rolling practice and products.. Düsseldorf, Germany: VDeh, p. 1-3 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  110. Anisotropic dilatation behaviour during transformation of hot rolled steels showing banded structure.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Technology. 17, 12, p. 1569-1574 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  111. Computational modelling of free and Moving boundary problems.

    van Til, W., Vuik, C. & van der Zwaag, S., 2001, Sixth International Conference on the Computational Modelling of Free and Moving Boundary Problems, Moving Boundaries VI.. p. 123-132 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  112. Digitisation of Al AA1050 microstructures as precursor in Monte Carlo simulations of recrystalisation: proof of experimental concept.

    Peekstok, ER., Tirel, J., Chen, SP., Hanlon, DN. & van der Zwaag, S., 2001, Delft: Delft University of Technology. 9 p.

    Research output: Book/ReportReportProfessional

  113. Dilatometric analysis of phase transformations in hypo-eutectoid steels.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 36, p. 519-526 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  114. Domain size determination of granular ferromagnetic systems with neutron depolarization

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. vol 89, no, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  115. Domain size determination of granular ferromagnetic systems with neutron depolarization.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. 89, 2, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  116. Effect of strain path in torsion on subsequent recrystallization behaviour of an AA1050 and AA3103 aluminium alloys.

    Valle, R., van der Zwaag, S. & Nes, E., 2001, 1st Joint International Conference on Recrystallization and Grain Growth.. Gottstein, G. & Molodov, DA. (eds.). Berlin: Springer, p. 1231-1236 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  117. Effects of nitriding on fatigue strength of quenched and tempered steel: role of interstitial nitrogen.

    Korevaar, BM., Coorens, S., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 17, p. 54-62 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  118. Flow stress prediction during intercritical deformation of a low-carbon steel with a rule of mixtures and Fe-simulations.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Scripta Metallurgica. 45, p. 875-882 8 p.

    Research output: Contribution to journalArticleScientific

  119. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  120. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels.

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  121. Monitoring the precipitation reactions in a cold-rolled Al-Mn-Mg-Cu alloy using thermoelectric power and electrical resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2001, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 81, 8, p. 2059-2072 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  122. Moving boundaries in solid state aluminium alloys

    van Til, W., Vuik, C. & van der Zwaag, S., 2001, Proceedings. B Sarler & CA Brebbia (eds.). Southampton: WIT Press, p. 123-132 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  123. OIM study on recrystallization of a cold rolled aluminium sheet metal.

    Chen, SP. & van der Zwaag, S., 2001, EBSD session at NvVm annual meeting.. p. 40-41 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  124. On the nature of the bimodal grain size distribution after intercritical deformation of a carbon-manganese steel.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Characterization. 47, p. 1-7 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  125. On the relation between softening processes and the austenite to ferrite phase transformation in steel.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, Minerals and Materials Society.. p. 215-227 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  126. On the role of hydrogen in fracture of commercial fastener steels.

    Lonyuk, B., Hop, R., Hanlon, DN., van der Zwaag, S., Zuidema, J. & Bakker, A., 2001, Proceedings of the International Symposium "Contemporary problems of Mechanics of Materials: Physico-chemical aspects and diagnostics of materials properties.. p. 104-105 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  127. Recovery and recrystallisation kynetics in deformed AA1050 after simulated break down rolling.

    Chen, SP., Zuidwijk, T. & van der Zwaag, S., 2001, 1st Joint International Conference on Recrystallization and Grain Growth.. Gottstein, G. & Molodov, DA. (eds.). Springer, p. 821-830 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  128. Some mathematical aspects of particle dissolution and cross-diffusion in multi-component alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2001, Delft: Delft University of Technology. 24 p.

    Research output: Book/ReportReportProfessional

  129. Some observations on the effect of austenitisation conditions on the transformation kinetics in an HSLA steel and related C-Mn steels.

    Kop, TA., Remijn, PGW., Svetchnikov, V., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 38, p. 1863-1871 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  130. Stabilization mechanisms of retained austenite in transformation-induced plasticity steel.

    Wang, J. & van der Zwaag, S., 2001, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 32A, p. 1527-1539 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  131. The application of laser scanning confocal microscopy to tribological research.

    Hanlon, DN., Todd, I., Peekstok, ER., Rainforth, WM. & van der Zwaag, S., 2001, In : Wear. 251, p. 1159-1168 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  132. The austenite to ferrite transformation kinetics of low carbon steels under ultra-fast cooling conditions.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, THERMEC 2000 ¿ Proceedings International Conference on Processing and Manufacturing of Advanced materials.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  133. The effect of beta, beta' and beta'' precipitates in a homogenised AA6063 alloy on the hot deformability and the peak hardness.

    van de Langkruis, J., Kool, WH., Sellars, CM., van der Winden, MR. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 229, p. 105-115 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  134. The effect of plastic deformation of austenite on the kinetics of subsequent ferrite formation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1028-1036 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  135. The effects of alloy composition and surface treatment on the development of filiform corrosion on aluminium alloys.

    Mol, JMC., Duxbury, E., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2001, Proceedings of the 41st Annual Conference of the Australasian Corrosion Association 'Corrosion and Prevention-01'.. p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  136. The gamma-alpha transformation kinetics of low carbon steels under ultra-fast cooling condition.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientific

  137. Theoretical study of P-containing transformation-induced plasticity steel. Part 1 - determination of the phosphorus concentration.

    Wang, J. & van der Zwaag, S., 2001, In : Zeitschrift fuer Metallkunde. 92, 12, p. 1299-1305 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  138. Theoretical study of P-containing transformation-induced plasticity steel. Part 2 - Analysis of the potential TRIP effect.

    Wang, J. & van der Zwaag, S., 2001, In : Zeitschrift fuer Metallkunde. 92, 12, p. 1306-1311 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  139. Transformation, microstructural and mechanical stabilization of metastable austenite in TRIP steels.

    Wang, J. & van der Zwaag, S., 2001, ECSC Steel & NEST workshop Advanced hot rolling practice and products for the production of hot rolled strips.. Düsseldorf, Germany.: VDeh, p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  140. 2002
  141. A discussion on the atomic mechanism of the bainitic reaction in TRIP steels

    van der Zwaag, S. & Wang, J., 2002, In : Scripta Materialia. 47, p. 169-173 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  142. A mathematical model for the dissolution of stoichiometric particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 328, p. 14-25 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  143. A metallographic analysis of intercritically deformed C-Mn steel subjected to complex strain histories

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : ISIJ International. 42, 4

    Research output: Contribution to journalArticleScientificpeer-review

  144. A nano-indentation study on the mechanical behaviour of the matrix material in an AA6061-Al2O3 MMC.

    Mussert, KM., Vellinga, WP., Bakker, A. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 789-794 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  145. A quantification of the kinetic character of mixed-mode solid-state phase transformations.

    Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  146. A study of post plating heat treatment in automotive fastener steels.

    Lonyuk, B., Hop, R., Hanlon, DN., van der Zwaag, S., Zuidema, J. & Bakker, A., 2002, ECF 14, Fracture Mechanics beyond 2000, Vol. II, Proc. of the 14th Bienniel Conference on Fracture (ECF 14), Cracow, Poland, 8-13 September 2002.. Neimitz, A., Rokach, IV., Kocanda, D. & Golos, K. (eds.). Sheffield, UK: EMAS Publications, p. 373-380 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  147. Acoustic emission investigations on the ferrite and bainite formation in low-alloy steel during ultra-fast cooling.

    Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  148. Changes in Fe and Si solute levels during deformation of AA1200

    Lok, ZJ., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002, In : Materials Science Forum. 396-402, p. 457-462 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  149. Changes in Fe and Si solute levels during deformation of AA1200.

    Lok, ZJ., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  150. DSC study on Mg-Si phases in as cast AA6xxx.

    Kuijpers, NCW., Kool, WH. & van der Zwaag, S., 2002, The 8th International Conference on Aluminium Alloys.. Switzerland: Materials Science Forum, p. 396-402 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  151. Effect of intercritical deformation on the isothermal bainitic transformation in Al-containing TRIP steels.

    Luo, H., Zhao, L., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  152. Ferrite/pearlite band formation in hot rolled medium carbon steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Technology. 18, p. 297-303 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  153. Filiform corrosion imaged beneath protection layers on Al Alloys

    Szymanski, R., Jamieson, DN., Hughes, T., Mol, JMC., van der Zwaag, S. & Ryan, CG., 2002, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 190, 1-4, p. 365-369 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  154. Grain nucleation and growth during phase transformations

    Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2002, In : Science. 298, p. 1003-1005 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  155. HRTEM observations of a-Al(FeMn)Si nucleation on B-AlFeSi intermetallics in Al-Mg-Si alloys

    Kuijpers, NCW., Chen, JH., Jansen, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  156. HRTEM observations of alpha-Al(FeMn)Si nucleations on ß-AlFeSi intermetallics in Al-Mg-Si alloys.

    Kuijpers, NCW., Chen, JH., Jansen, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  157. High Temperature SANS Experiments on Nb(C,N) and MnS Precipitates in HSLA Steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S. & Heenan, RK., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, July 2002, p. 1883-1891 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  158. In situ observations on the austenite stability in TRIP-steel during tensile testing

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Margulies, L., Lauridsen, EM., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002, In : Steel Research International. 73, 6+7, p. 236-241 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  159. In situ observations on the austenite stability in TRIP-steel during tensile testing

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Margulies, L., Lauridsen, EM., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002, Fundamental Materials Science of the TRIP Phenomenon. BC De Cooman (ed.). Aachen-Mainz: Wissenschaftsverlag Mainz GmbH, p. 25-29 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  160. In-situ high-temperature X-ray diffraction on the g to a transformation in low-carbon steels

    Bodin, A., Woning, L., Sietsma, J. & van der Zwaag, S., 2002, In : ISIJ International. 42, p. 94-99 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  161. In-situ observation of the austenite to ferrite phase transformation in steels.

    van der Meij, R., Peekstok, ER., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  162. In-situ observations on the mechanical stability of austenite in TRIP steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  163. In-situ observations on the mechanical stability of austenite in TRIP-steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  164. In-situ observations on the mechanical stability of austenite in TRIP-steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  165. Influence of intercritical annealing temperature on the microstructure in a high aluminium TRIP steel

    Zhao, L., Moreno, JJ., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002, TRIP-aided ferrous alloys. BC De Cooman (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 141-146 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  166. Investigation of recovery and recrystallisation processes in C-Mn steel.

    Smith, A., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  167. Magnetic determination of the thermal stability of retained austenite in TRIP steel

    Zhao, L., Tegus, O., Brück, E., van Dijk, NH., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002, Fundamental Materials Science of the TRIP Phenomenon. de Cooman, DC. (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 71-74 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  168. Magnetic determination of the thermal stability of retained austenite in TRIP steel.

    Zhao, L., Tegus, O., Brück, E., van Dijk, NH., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  169. Microchemical and structural changes after hot working of AA3103

    Lok, ZJ., Anselmino, E., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  170. Microstructure development and mechanical behaviour of Al-containing TRIP-steels

    Papaefthymiou, S., Bleck, W., Kruijver, SO., Zhao, L., Sietsma, J. & van der Zwaag, S., 2002, Automative Applications. BC De Cooman (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 341-345 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  171. Modeling the kinetics of grain boundary nucleated recrystallisation processes after cold deformation

    Chen, SP., Todd, I. & van der Zwaag, S., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, p. 529-539 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  172. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part I: Phase regions.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1199-1207 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  173. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part II: Microstructure and hardness.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1208-1216 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  174. Neutron depolarization study of the austenite/pearlite phase transformation in steel

    van Wilderen, LJGW., Offerman, SE., van Dijk, NH. & van der Zwaag, S., 2002, In : Applied Physics A: materials science & processing. 74, Part 2 sup, p. s1052-s1054

    Research output: Contribution to journalArticleScientificpeer-review

  175. Neutron depolarization study on the autenite/pearlite phase transformation in steel

    van Wilderen, LJGW., Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S1052-S1054

    Research output: Contribution to journalArticleScientificpeer-review

  176. Quantification of the evolution of the 3D intemetallic structure in a 6005A aluminium alloy during a homogenisation treatment.

    Kuijpers, NCW., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2002, In : Materials Characterization. 48, p. 379-392 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  177. Quantification of the recrystallization behaviour in Al-alloy AA1050

    Chen, SP., Hanlon, DN., van der Zwaag, S., Pei, YT. & Hosson, T., 2002, In : Journal of Materials Science. 37, p. 989-995 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  178. Quantitative dilatometric analysis of intercritical annealing in a low-silicon TRIP steel

    Zhao, L., Kop, TA., Rolin, V., Sietsma, J., Mertens, AIM., Jacques, PJ. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 1585-1591 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  179. SANS experiments on Nb(C,N) and MnS precipitates in HSLA steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S978-S980

    Research output: Contribution to journalArticleScientificpeer-review

  180. Texture and microstructure development during intercritical rolling of low-carbon steels

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, p. 1589-1603 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  181. The application of reversed torsion deformation to the study of the austenite to ferrite phase transformation in steels

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : Scripta Materialia. 46, p. 413-417 5 p.

    Research output: Contribution to journalArticleScientific

  182. The effect of mechanical surface patterning on filiform growth characteristics

    Mol, JMC., de Wit, JHW. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, 13, p. 2755-2761 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  183. The influence of nitrogen on the austenite/ferrite interface mobility in Fe-1at.%Si

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 323, p. 403-408 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  184. The role of dispersoids in thermo-mechanical processes of aluminium alloys.

    Anselmino, E. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  185. Thermal and mechanical stability of retained austenite in Al-containing TRIP steels

    Zhao, L., Kruijver, SO., van der Pers, NM., Sietsma, J., Tegus, O., Brück, E., van Dijk, NH. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  186. Thermal and mechanical stability of retained austenite in aluminium-containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2002, In : ISIJ International. 42, 12, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  187. 2003
  188. A model of the beta-AlFeSi to alpha-Al(FeMn)Si transformation in Al-Mg-Si alloys

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Transactions. 44, 7, p. 1448-1456 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  189. A physics-based transformation model for low-carbon steels: from first principles to on-line application

    van Leeuwen, Y., Luinenburg, A. W., Onink, M., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientific

  190. A study on the beta' and beta" formation kinetics in AA6063 using differential scanning calorimetry

    van de Langkruis, J., Vossenberg, MS., Kool, WH. & van der Zwaag, S., 2003, In : Journal of Materials Engineering and Performance. vol. 12, No. 4, p. 408-413 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  191. Acoustic-emission investigations on the austenite decomposition in a medium-carbon steel.

    Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2003, Tranformation and Deformation Mechanisms in Advanced High-Strength Steels.. Militzer, M., Essadiqu, E. & Poole, W. J. (eds.). Vancouver, Canada: COM 2003, p. 109-124 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  192. Advanced models for particle dissolution in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, Euromat 2003. p. 142-145 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  193. Analysis of the y - a transformation in a C-Mn steel by dilatometry, laser scanning confocal microscopy and phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2003, EPD 2003 conference in Chicago. Damm, E. B. & Merwin, M. J. (eds.). Chicago, USA: EPD, p. 353-366 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  194. Assessment of different techniques for quantification of alpha-Al(FeMn) and beta-AlFeSi intermetallics in AA 6xxx alloys.

    Kuijpers, NCW., Kool, WH., Koenis, PTG., Nilsen, K. E., Todd, I. & van der Zwaag, S., 2003, In : Materials Characterization. 49, p. 409-420 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  195. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite Formation and Decomposition. Damm, EB. & Merwin, M. (eds.). Warrendale, USA: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  196. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite and Decomposition. Damm, EB. & Merwin, EB. (eds.). Warrendale: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  197. Cluster formation of pearlite colonies during the austenite/pearlite phase transformation in eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, In : Physica B: Condensed Matter. 335, p. 99-103 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  198. Dispersoid characterisation during hot processing of AA3103.

    Anselmino, E., Miroux, A. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  199. Dispersoid evolution during hot working of AA3103.

    Anselmino, E., Lok, ZJ., Hamerton, R. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  200. Effect of Intercritical deformation on bainite formation in Al-containing TRIP steel

    Luo, H., Zhao, L., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, 8, p. 1219-1227 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  201. Effect of microsegregation and dislocations on the nucleation kinetics of precipitation in aluminium alloy

    Chen, SP., Kuijpers, NCW. & van der Zwaag, S., 2003, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A341, p. 296-306 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  202. Evolving microstructure in pearlitic steel studied by neutron depolarisation

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 56-57 88 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  203. Grain Nucleation and Growth during Phase transformations

    Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2003, ESRF Highlights. Cornuéjols, D. & Admans, G. (eds.). Grenoble: ESRF, p. 66-67 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  204. High temperature SANS experiments on Nb(C,N) and Mn5 precipitates in HSLA steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 58-59 88 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  205. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  206. Hot deformation stimulated Mn depletion in AA3103.

    Lok, ZJ., Anselmino, E., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  207. In situ observations of the austenite to ferrite transformation

    van der Zwaag, S., Sietsma, J., Onink, M. & te Velthuis, SGE., 2003, Int. Conf Thermomechanical Processing. E.J. Palmiere, M. Mahfouf & C. Pinna (eds.). Sheffield, p. 193-196 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  208. In situ observations on the mechanical stability of austenite in TRIP steel

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003, In : The European Physical Journal. Special Topics. 104, p. 499-502 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  209. In-situ study of pearlite nucleation and growth during isothermal austenite decomposition in nearly eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 2003, In : Acta Materialia. 51, p. 3927-3938 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  210. Isolating the effect of the dislocation substructure on the austenite to ferrite transformation kinetics in C-Mn steel following hot plastic deformation

    Hanlon, DN., Davenport, SB., Hunt, RD. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 176-183 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  211. Material characterisation and optimisation of fibre metal laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2003, Computational Methods in Materials Characterisation. Series: High Performance Structures and Materials. Mammoli, A. A. & Brebbia, C. A. (eds.). Southampton: WIT Press, p. 55-64 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  212. Microchemistry effects during recrystallization of aluminium alloys.

    Miroux, A., Lok, ZJ., Anselmino, E., Chen, C. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  213. Micromechanical damage simulations of TRIP steels

    Papaefthymiou, S., Bleck, W., Prahl, U., Acht, C., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1355-1360 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  214. Modelling work-hardening of intercritically deformed low-carbon steels using a physical, a statistical, a hybrid and a finite element approach

    Bodin, A., Butler, SA., Burghardt, A., Sietsma, J. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 138-145 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  215. Neutron depolarisation study on the austenite grain size in TRIP steels.

    van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  216. On subsurface crack growth in fibre metal laminate materials

    Randell, CE. & van der Zwaag, S., 2003, Materials and Processing: Enabling Flight, our legacy and our future. Schmitt, G. E. (ed.). Covina, USA: SAMPE, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  217. On the precipitation and recrystallization behavior in an AA3003 following hot deformation

    Chen, SP., Lok, ZJ. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 281-288 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  218. Particle dissolution and cross-diffusion in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A347, p. 265-279 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  219. Physical Simulation of Thermally Induced Martensite Formation from Retained Austenite in TRIP steels

    Zhao, L., Vermolen, FJ., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 19, suppl 1, p. 105-108 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  220. Quantification of dispersoids in hot and cold processed AA3103.

    Anselmino, E., Miroux, A. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  221. Quantification of the evolution of the 3D intermetallic structure in a 6005A aluminium alloy during a homogenisation treatment

    Kuijpers, NCW., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2003, In : Materials Characterization. 48, p. 379-392 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  222. Softening kinetics of deformed C-Mn steel in the intercritical region.

    Luo, H., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  223. Tailoring austenite stability in TRIP Steels.

    Butt, A., Zhao, L., van Dijk, NH. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  224. Tailoring austenite stability in TRIP-steels.

    Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  225. The influence of carbon diffusion on the character of the gamma-alpha phase transformation in steel

    van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, No. 5, p. 767-773 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  226. The mechanical stability of austenite in TRIP steel observed by 3D X-ray microdiffraction

    Kruijver, SO., Zhao, L., Sietsma, J., Lauridsen, EM., Poulsen, HF., Offerman, SE., van Dijk, NH., Margulies, L., Grigull, S. & van der Zwaag, S., 2003, Transformation and deformation mechanisms in advanced high-strength steels. Militzer, M., Poole, WJ. & Essadiqi (eds.). Vancouver, Canada: Metsoc, p. 223-234 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  227. The tensile stability of austenite in TRIP steel observed by 3D X-ray microdiffraction.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Jargulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  228. Thermal and mechanical stability of retained austenite in aluminium containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2003, In : ISIJ International. 42, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  229. Through process modeling of Mn precipitation in AA3103.

    Lok, ZJ., Miroux, A. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  230. Wholly Aromatic Main-chain nematic Thermosets for Composite Applications

    Dingemans, TJ. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  231. 2004
  232. A Statistical Mechanics Theory of Grain Deformation and its Prediction of Dynamical Recovery and Recrystallization

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 87-92 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  233. A comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of AA1050

    Chen, SP. & van der Zwaag, S., 2004, In : Journal of Testing and Evaluation. 32, 4, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  234. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  235. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  236. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  237. A model of the beta-AlFeSi to alpha-A1(FeMn)Si transformation during homogenization in 6xxx alloys

    Vermolen, FJ., Kuijpers, NCW., Vuik, C., Koenis, PTG., Nilsen, K. E. & van der Zwaag, S., 2004, Proceedings of the Eight international aluminum extrusion technology seminar. Rajski, GT. (ed.). Wouconda, Ill, US: ET Foundation, p. 57-65 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  238. A morphological study of filiform corrosive attack on cerated AA2024-T351 alluminium alloy

    Hughes, A. E., Mol, JMC., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, p. 107-124 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  239. A morphological study of filiform corrosive attack on chromated and alkaline-cleaned AA2024-T351 aluminium alloy

    Mol, JMC., Hughes, A. E., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 46, 5, p. 1201-1224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  240. A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 9, p. 2789-2797 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  241. A quantitative description of multicomponent growth of needle-shaped prcipitates in non-ideal solutions

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, 10th World Conference on Titanium. Prof. Dr. G. Lutjering & Prof.Dr. J. Albrecht (eds.). Weinheim: Wiley-VCH, p. 1083-1089 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  242. A single grain approach applied to the modeling of recrystallization kinetics for cold rolled single-phase metals

    Chen, SP. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35(A), 3, p. 741-749 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  243. Advanced models for particle dissolution in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, Solid state transformation and heat treatment, part 1: Precipitation and diffusion processes. Hazotte, A. (ed.). Weinheim: Wiley-VCH, p. 53-61 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  244. Assuring Microstructural Homogenity in Dual Phase and Trip Steels

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Steel Research International. 75, p. 711-715 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  245. Characteristics of the static recrystallisation kinetics of an intercritically deformed C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 293-298 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  246. Controlling retained austenite stability in TRIP steel

    Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  247. Determination of Fatigue Damage at Precipitate Level in 2024-T3 using Positron Annihilation and Nuclear Magnetic Resonance

    van der Zwaag, S., van Veen, A., Schut, H., Hill, AJ. & Bastow, T. J., 2004, Conference Proceeding for the 9th International Aluminum Alloys Conference. Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: Institute of Materials Engineering Australasia Ltd, p. 363-368 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  248. Determination of microscale deformation in hot worked steel

    Hernandez castillo, L. E., Beynon, JH., Pinna, C. & van der Zwaag, S., 2004, Metal Forming 2004. Krakow, p. 387-392 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  249. Dielectric characterization of a series wholly aromatic poly(ether imide)s

    Dingemans, TJ., Mayingi, J., van der Zwaag, S. & Wübbenhorst, M., 2004.

    Research output: Contribution to conferencePosterProfessional

  250. Dilatometric investigations on the decomposition of austenite in two medium-carbon steels with and without Cr and Mo additions

    Mertens, AIM., Brown, A., Zhao, L., McDermid, JR., Sietsma, J. & van der Zwaag, S., 2004, Materials Science & Technology (MS&T) 2004 Conference Proceedings. s.n. (ed.). Wallendale: AIST & TMS, p. 187-198 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  251. Dispersoid quantification and size distribution in hot and cold processed AA3103

    Anselmino, E., Miroux, AG. & van der Zwaag, S., 2004, In : Materials Characterization. 52, 4-5, p. 289-300 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  252. Effect of inhomogeneous deformation on the recrystallization kinetics of deformed metals

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 11, p. 1931-1936 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  253. Evaluation of the applicability of a thermomechanical model to industrial extrusion experiments of AA6063

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 2004, Proceedings 8th International Aluminum Extrusion Technology Seminar ET 2002. Fellom, AM., Rajsky, GT., Skillingberg, MH. & Werner, RI. (eds.). Wauconda: ET Foundations, p. 253-258 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  254. Evolving microstructures in carbon steel studied by 3DXRD microscopy

    Offerman, SE., Zijden, ACP., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, Evolution of deformation microstructures in 3D. Gundlach, G., Haldrup, K., Hansen, N., Huang, X., Juul Jensen, D., Leffers, T., Li, ZJ., Nielsen, SF., Pantleon, W., Wert, JA. & Winther, G. (eds.). Roskilde: Riso national Laboratory, p. 471-480 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  255. Experimental measurement of microchemistry evolution during processing of AA3103

    Miroux, AG., Lok, ZJ., Anselmino, E., Flemming, A. J. E., Bigot, A., Janot, E., Hagström, J., Liu, C., Dons, AL., Lötche, L. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, 6, p. 655-660 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  256. Ferrite nucleation and growth in medium-carbon steel studied by 3DXRD microscopy

    Offerman, SE., Zijden, ACP., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, MS&T conference proceedings. Baker, MA. (ed.). Association for Iron & Steel Technology, p. 227-234 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  257. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2004, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  258. Highlights of designing with Hylite - a new material concept

    Burchitz, I., boesenkool, B., van der Zwaag, S. & Tassoul, M., 2004, In : Materials and Design. 26, 4, p. 271-279 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  259. In-situ Observations of Recrystallisation in AA3103 using FEG-SEM and EBSD

    Anselmino, E., van der Zwaag, S., Seward, G. G. E., Seaton, N. C. A. & Prior, D. J., 2004, Conference Proceeding for the 9th International Aluminum Alloys Conference. Fellom, AM., Rajsky, GT., Skillingberg, MH. & Werner, RI. (eds.). Brisbane: ET Foundations, p. 811-817 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  260. In-situ determination of the ferrite nucleation and growth rates and its relation to the austenite grain size distribution

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004.

    Research output: Contribution to conferenceAbstractScientific

  261. In-situ observations of recrystallisation in AA3103 using FEG-SEM and EBSD.

    Anselmino, E., Miroux, AG., van der Zwaag, S., Seward, G. G. E., Seaton, N. C. A. & Prior, D. J., 2004, In : Materials Forum. 28, p. 811-817 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  262. Influence of intercritical deformation on microstructure of TRIP steels containing Al

    Papaefthymiou, S., Bleck, W., Kruijver, SO., Sietsma, J., Zhao, L. & van der Zwaag, S., 2004, In : Materials Science and Technology. 20, p. 201-206 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  263. Influence of multiphase microstructure on the mechanical properties and fracture mechanisms of TRIP steel

    Papaefthymiou, S., Bleck, W., van der Zwaag, S. & Sietsma, J., 2004, Proceedings of the 2nd Hellenic Conference on Metallic Materials. Pantelis, DI. (ed.). Athens: Hellenic Metallurgic Society, p. 51-57 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  264. Investigation of ferrite softening processes in a 0.2 wt% C 1.5 wt% Mn steel after hot deformation.

    Smith, A., Hanlon, DN., Luo, H., Sietsma, J. & van der Zwaag, S., 2004, Solid state transformation and heat treatment. Hazotte, A. (ed.). Lausanne: Wiley-VCH, p. 175-180 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  265. Modelling recovery an recrystallization kinetics after intercritical deformation in 0.19wt% C1.5wt% Mn steel

    Smith, A., Miroux, AG., Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 329-334 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  266. Neutron depolarisation study of the austenite grain size in TRIP steels

    van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2004, In : Physica B: Condensed Matter. 350, p. e463-e466

    Research output: Contribution to journalArticleScientificpeer-review

  267. Novel liquid crystal thermoset resins for cryogenic fuel tank applications

    Dingemans, TJ., van der Zwaag, S., Knijnenberg, A., Weiser, E. S. & Jensen, B. J., 2004, 24th International Congress of the Aeronautical Sciences. Japan, p. 01-04 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  268. Observing individual grains during the evolution of the microstructure of steel

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  269. On the bond strength of aluminium foams bonded to sold aluminium

    Nieuwkoop, P., van der Zwaag, S. & Rizam A Majid, M. S., 2004, Society for the Advanced Material and Process Engineer. Green, J. E. (ed.). Madison: SAMPE, p. 1-15 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  270. On the bond strength of aluminium foams bonded to solid aluminium

    Nieuwkoop, P., van der Zwaag, S. & Rizam Majid, M. S., 2004, In : SAMPE Journal. p. 1-15 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  271. Phase transformations in steel observed by the 3D-XRD microscope at ESRF

    Sietsma, J., Kruijver, SO., Offerman, SE., van Dijk, NH., Zhao, L. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  272. Physical simulation of thermally induced martensite formation from retained austenite in TRIP steels

    Zhao, L., Vermolen, FJ., Sietsma, J. & van der Zwaag, S., 2004, Proceedings of the 4th International Conference on Physical and Numerical Simulation of Materials Processing.. Zhuanqi, H. (ed.). Shanghai: Journal of Materials Science and Technology, p. 105-108 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  273. Predicting the Effect of Alloy Composition on the Intermetallic Phase Transformation Kinetics in 6XXX Extrusion Alloys

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, Conference Proceedings of the 9th International Aluminum Alloys Conference. Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: s.n., p. 1040-1045 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  274. Predicting the effect of alloy composition on the intermetallic phase transformation kinetics in 6XXX extrusion alloys.

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, In : Materials Forum. 28, p. 1040-1045 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  275. Property Optimisation in Fibre Metal Laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2004, In : Applied Composite Materials: an international journal for the science and application of composite materials. 11, p. 63-76 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  276. Quantifying anisotropic solute transport in protein crystals using 3-D laser scanning confocal microscopy visualization

    Cvetkovic, A., Straathof, AJJ., van der Wielen, LAM., van der Zwaag, S., Krishna, R. & Hanlon, DN., 2004, In : Biotechnology and Bioengineering. 86, 4, p. 389-398 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  277. Recovery Processes in the Ferrite Phase in C-Mn Steel

    Smith, A., Luo, H., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 7, p. 1188-1194 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  278. Recovery and recrystallisation of C-Mn steels in the intercritical region

    Luo, H., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2004, Proceedings of the 4th International Conference on Physical and Numerical Simulation of Materials Processing. Zhuangqi, H. (ed.). Shanghai: Journal of Materials Science and Technology, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  279. Recrystallisation Texture of Cold Rolled and Annealed IF Steel Produced from Ferritic Rolled Hot Strip

    Elsner, A., Kaspar, R., Ponge, D., Raabe, D. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 257-262 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  280. Recrystallisation and concurrent precipitation in hot rolled AA 3103

    Miroux, AG., Lok, ZJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 393-398 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  281. Recrystallisation and the rate of Mn precipitation in AA3103

    Lok, ZJ., Miroux, AG. & van der Zwaag, S., 2004, Proceedings of the 9th International Conference on Aluminium Alloys.. Morton Nie, JF., Muddel, BC., Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: Institute of Materials Engineering, p. 1073-1079 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  282. Reply to the discussion by Aaronson et al. to "Grain nucleation and growth during phase transformations" by S.E. Offerman et al., Science, 298, 1003 (Nov. 1, 2002)

    Offerman, SE., van Dijk, NH., Sietsma, J., van der Zwaag, S., Lauridsen, EM., Margulies, L., Grigull, S. & Poulsen, HF., 2004, In : Scripta Materialia. 51, p. 937-941 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  283. Simulation of Concurrent Precipitation Effect on Recrystallisation

    Miroux, AG., Anselmino, E. & van der Zwaag, S., 2004, Proceedings of the 9th International Conference on Aluminum Alloys.. Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: The Institute of Materials Engineering., p. 1104-1109 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  284. Size distributions and volume fractions of dispersoids in hot and cold processed AA3103

    Anselmino, E., Miroux, AG. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, June, p. 680-685 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  285. Solid-state phase transformations involving solute partitioning: modeling and measuring on the level of individual grains

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4757-4766 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  286. Solute level determination in AA1200 and AA3103

    Lok, ZJ., Löchte, L. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, p. 647-653 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  287. Stress reduction in a-C:H coatings through the addition of nitrogen to the feed gas

    Rabbani, F., Escobar Galindo, R., Arnoldbik, WM., van der Zwaag, S., van Veen, A. & Schut, H., 2004, In : Diamond and Related Materials. 13, p. 1645-1657 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  288. 2005
  289. 3DXRD microscopy for the study of solid-state phase transformation kinetics.

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  290. An integrated study on the effect of pre- and post-extrusion heat treatments and surface treatment on the filiform corrosion properties of an aluminium extrusion alloy

    Mol, JMC., van de Langkruis, J., de Wit, JHW. & van der Zwaag, S., 2005, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, 11, p. 2711-2730 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  291. Analysis of the y - a transformation in a C-Mn steel by phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2005, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 36A, (9), p. 2327-2340 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  292. Application of the energy release rate approach for delamination growth in Glare

    Alderliesten, RC., Schijve, J. & van der Zwaag, S., 2005, In : Engineering Fracture Mechanics. p. 1-13 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  293. Contribution to the understanding of austenite stability in a 12Cr-9Ni-4Mo maraging steel

    San Martin, D., van Dijk, NH., Yagodzinsky, Y., Brück, E. & van der Zwaag, S., 2005, In : Materials Science Forum. 500-501, p. 339-346 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  294. Cross-diffusion controlled particle dissolution in metallic alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2005, In : Computing and Visualization in Science. 8, 1, p. 27-33 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  295. Dilatometric investigations on the decomposition of austenite in two medium-carbon steels with and without Cr and Mo additions

    Mertens, AIM., Brown, AJ., Zhao, L., McDermid, JR., van der Zwaag, S. & Sietsma, J., 2005, Material Science & Technology 2004. Baker, M. A. (ed.). Warrendale: Association for Iron & Steel Technology, p. 187-198 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  296. Effect of Strain Rate on the Subsequent Softening and Precipitation Kinetics in a Nb-Microalloyed Steel

    Luo, H., Qin, Y., Sietsma, J. & van der Zwaag, S., 2005, In : Steel Research International. 09, 76, p. 650-655 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  297. Ferrite/pearlite band prevention in dual phase and TRIP steels: Model development

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2005, In : ISIJ International. 45, 3, p. 380-387 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  298. Highlights of designing with Hylite - a new material concept

    Burchitz, I., boesenkool, B., van der Zwaag, S. & Tassoul, M., 2005, Delft Science in Design - A congress on Interdisciplinary Design. Mick Eekhout (ed.). Delft: Faculty of Architecture, p. 29-42 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  299. Improving the adhesion of thin stainless steel sheets for fibre metal laminates (FML) applications

    van Rooijen, RGJ., Sinke, J. & van der Zwaag, S., 2005, In : Journal of Adhesion Science and Technology. 19, p. 1387-1396 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  300. Improving the adhesion of thing stainless steel sheets for fibre metal laminate (FML) applications

    van Rooijen, RGJ., Sinke, J. & van der Zwaag, S., 2005, In : Journal of Adhesion Science and Technology. 19, 16, p. 1387-1396 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  301. In situ x-ray diffraction measurements of deformation-induced austenite to martensite transformation in a multiphase TRIP steel

    Zhao, L., van der Pers, NM., Sietsma, J. & van der Zwaag, S., 2005, In : Materials Science Forum. 500-501, p. 379-386 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  302. In-situ observations of recrystallisation in AA3103.

    Anselmino, E., Prior, D. J., Miroux, AG. & van der Zwaag, S., 2005.

    Research output: Contribution to conferencePosterProfessional

  303. Investigation of ferrite softening process in a 0.2 wt% C 1.5 wt% Mn steel after hot deformation

    Smith, A., Hanlon, DN., Luo, H., Sietsma, J. & van der Zwaag, S., 2005, Solid State Transformation and Heat Treatment. s.n. (ed.). Weinheim: Wiley-VCH, p. 175-180 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  304. Low-temperature synchrotron X-ray diffraction studies of TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE. & van der Zwaag, S., 2005.

    Research output: Contribution to conferencePosterProfessional

  305. Magnetically assisted martensitic transformation in a 12Cr-9Ni maraging steel

    San Martin, D., van Dijk, NH., Brück, E. & van der Zwaag, S., 2005, Proceedings of Stainless Steel World 2005. Donald Wiedemeyer, KCI. W. & Thierry Cassagne, C. (eds.). Zutphen: KCI Publishing, p. 374-379 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  306. Micro-scale Strain Distribution in Hot-worked Duplex Stainless Steel

    Hernandez castillo, L. E., Beynon, JH., Pinna, C. & van der Zwaag, S., 2005, In : Steel Research International. 76, 2/3, p. 137-141 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  307. Modeling nucleation and growth in multiphase steel using recent in-situ observations

    Offerman, SE., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2005, Modellierung und Simulation von Prozessen der Stahlerzeugung und Stahlverarbeitung. R., K. (ed.). Freiberg: TU Bergakademie, p. 97-112 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  308. Modeling of the transformation kinetics of the beta to alpha + beta transformation in Ti-4.5Fe-6.8Mo-1.5Al based on dilatometric results and the morphology of the alpha plates

    van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2005, Modeling and Simulation of Titanium Technology: Theory and Practices. Ellen Cerreta, Vasisht Venkatesh, F. Dax & Jaimie Tiley (eds.). Pittsburgh: TMS Publications, p. 63-77 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  309. Modelling the Deformation of Ultra Fine Grained Metals Using Statistical Mechanics Concepts

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2005, In : Iron & Steel. 40, p. 60-65 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  310. Phase field modelling of the interfacial condition at the moving interphase during the y - a transformation in C-Mn steels

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2005, In : Computational Materials Science. 34, 3, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  311. Review on some Stefan Problems for Particle Dissolution in Solid Metallic Alloys

    Vermolen, FJ., Vuik, C., Javierre Perez, E. & van der Zwaag, S., 2005, In : Nonlinear Analysis: modelling and control (online). 10, 3, p. 257-292 36 p.

    Research output: Contribution to journalArticleScientific

  312. Tailoring of Ostwald ripening behaviour in multicomponent Al alloys

    Rivera Diaz del Castillo, PEJ., Reischig, P. & van der Zwaag, S., 2005, In : Scripta Materialia. 52, 8, p. 705-708 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  313. The bearing strenght of Fiber Metal Laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2005, In : Journal of Composite Materials. 40, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  314. The dependence of the B-AlFeSi to x-Al(FeMn)Si transformation kinetics in Al-Mg-Si alloys on the alloying elements

    Kuijpers, NCW., Vermolen, FJ., Vuik, C., Koenis, PTG., Nilsen, KE. & van der Zwaag, S., 2005, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 395, p. 9-19 11 p.

    Research output: Contribution to journalArticleScientific

  315. Theory for diffusional transformation kinetics: Multicomponent and multiphase systems

    Rivera Diaz del Castillo, PEJ., Reischig, P., Xu, W. & van der Zwaag, S., 2005, In : Scripta Materialia. 53, 9, p. 1089-1094 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  316. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling

    van Dijk, NH., Butt, AM., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2005, In : Acta Materialia. 53, p. 5439-5447 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  317. 2006
  318. A comparison of numerical models for one-dimensional Stefan problems

    Javierre Perez, E., Vuik, C., Vermolen, FJ. & van der Zwaag, S., 2006, In : Journal of Computational and Applied Mathematics. 192, p. 445-459 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  319. A first step towards Self Healing in Aluminium alloys

    Hautakangas, SM., Schut, H., Rivera Diaz del Castillo, PEJ., van Dijk, NH. & van der Zwaag, S., 2006, Proceedings International Conference on New Frontiers in Light Metals. L. Katgerman (ed.). Delft: Delft University of Technology, p. 29-38 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  320. A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 595-602 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  321. A suite of sharp interface models for solid-state transformations in alloys

    Vermolen, FJ., Pinson, P., Vuik, C. & van der Zwaag, S., 2006, Proceedings of the ECCOMAS Computational Fluid Dynamics Conference.. Wesseling, P. & Onate, E. (eds.). Delft: Delft University of Technology, p. 1-16 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  322. A themostatistical Model for Cell Formation in Two Dimensions

    Rivera Diaz del Castillo, PEJ., Huang, M. & van der Zwaag, S., 2006, TMS Letters, Proceedings of the TMS 2006 Annual Meeting. s.n. (ed.). p. 13-14 2 p. (TMS Letters; vol. 3).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  323. Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling.

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 1431-1440 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  324. Analysis of nucleation and interfacial mobility for polygonal ferrite formation using phase field simulations.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2006, TMS Letters, Proceedings of the TMS 2006 Annual Meeting. Thoma, D. (ed.). USA: TMS, p. 15-16 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  325. Chapter 14: Modelling microchemistry. Simulation of alloy effects in aluminium

    Miroux, AG., Lok, ZJ., Anselmino, E. & van der Zwaag, S., 2006, Virtual Fabrication of Aluminium Products. Microstructural Modelling in Industrial Aluminium Fabrication Processes. J. Hirsch (ed.). Weinheim: Wiley-VCH, p. 199-212 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  326. Evolution of the mixed-mode character of solid-state phase transformations in metals involving solute partitioning.

    Sietsma, J., Mecozzi, MG., van Bohemen, SMC. & van der Zwaag, S., 2006, In : Zeitschrift fuer Metallkunde. 97, 4, p. 356-361 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  327. Experimental observations elucidating the mechanisms of structural bcc-hcp transformations in beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2006, In : Physical Review B (Condensed Matter and Materials Physics). 74, 13, p. 134114-1-13114-10

    Research output: Contribution to journalArticleScientificpeer-review

  328. Fibre metal laminates and constructions provided therewith

    van Rooijen, RGJ. & van der Zwaag, S., 2006, IPC No. Aangevraagd door TU Delft, Patent No. WO 2006/123928 A1, Priority date 23 Nov 2006

    Research output: Patent

  329. Higher dimensional numerical simulations of precipitate dissolution in multi-component aluminium alloys

    Javierre Perez, E., Vuik, C., Vermolen, FJ., Segal, A. & van der Zwaag, S., 2006, Proceedings of the ECCOMAS Computational Fluid Dynamics Conference.. Wesseling, P. & Onate, E. (eds.). Delft: Delft University of Technology, p. 1-11 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  330. In-situ SEM observations of moving interfaces during recrystallisation

    van der Zwaag, S., Anselmino, E., Miroux, AG. & Prior, D. J., 2006, In : Materials Science Forum. 519-521, p. 1341-1348 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  331. Influence of concurrent precipitation on the nucleation kinetics during recrystallisation in AA3003

    Chen, SP., Miroux, AG. & van der Zwaag, S., 2006, In : Materials Science Forum. 519-521, p. 1605-1610 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  332. Laser-ultrasonic monitoring of austenite recrystallization in C-MN steel

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2006, In : ISIJ International. 46, 8, p. 1223-1232 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  333. Martensitic transformation of individual grains in multiphase metallic systems

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2006, In : Scripta Materialia.

    Research output: Contribution to journalArticleScientificpeer-review

  334. Modeling recrystallization kinetics in AA1050 following simulated break-down rolling

    Chen, SP. & van der Zwaag, S., 2006, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 37A, p. 2859-2869 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  335. Modelling Steady State Deformation in Metals by a Novel Thermostatistical Approach

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2006, Materials Proceeding of Materials Science and Technology 2006 conference and Exhibition. s.n. (ed.). Warrendale, PA 15086: The Minerals, Metals & Materials Society (TMS), p. 373-382 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  336. Modelling dispersoid precipitation during recrystallisation in AA3103.

    Lok, ZJ., Miroux, AG. & van der Zwaag, S., 2006, In : Materials Science Forum. 519-521, p. 443-448 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  337. Modelling of the effects of grain orientation on transformation-induced plasticity in multiphase carbon steels

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2006, In : Modelling and Simulation in Materials Science and Engineering. 14, p. 617-636 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  338. Modelling the stress relaxation kinetics of intercritically deformed austenite and ferrite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 603-613 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  339. Modification of a thermomechanical model to predict constitutive behavior of Al-Mg-Si alloys.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 2006, In : Journal of Materials Engineering and Performance. 15, 6, p. 632-639 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  340. Navormbare PZT-LCT sensoren met hoge gevoeligheid en thermo-chemische stabilteit

    van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2006, IPC No. Aanvrager TU-Delft, Patent No. NL 466885-VB, Priority date 8 Dec 2006

    Research output: Patent

  341. Phase transformations in steel studied by 3DXRD-microscopy

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2006, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 246, p. 194-200 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  342. The Level Set Method for Solid-Solid Phase Transformations

    Javierre Perez, E., Vuik, C., Vermolen, FJ., Segal, A. & van der Zwaag, S., 2006, Proceedings of ENUMATH 2005. Bermudez de Castro, A. & Gomez, D. (eds.). Berlin: Springer, p. 712-719 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  343. The bearing strength of fibre metal laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2006, In : Journal of Composite Materials. 40, 1, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  344. The effect of thermal crosslinking on the formation of kink banks in high performance rigid-rod polymer fibres

    Knijnenberg, A., Dingemans, TJ. & van der Zwaag, S., 2006.

    Research output: Contribution to conferencePosterProfessional

  345. Three-dimensional phase field modelling of the austenite-to-ferrite transformation.

    Militzer, M., Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 3961-3972 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  346. 2007
  347. A mathematical approach to epidermal wound healing: Model Analysis and Computer Simulations

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2007, In : Reports of the Department of Applied Mathematical Analysis. 07, 14, p. 1-19 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  348. A new etching route for reveailing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

    San Martin, D., Rivera Diaz del Castillo, PEJ., Peekstok, ER. & van der Zwaag, S., 2007, In : Materials Characterization. 58, p. 455-460 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  349. A novel 2D analysis method to study individual grains using high-energy X-ray microbeam diffraction

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2007, In : Advances in X-Ray Analysis. 51, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  350. A three-dimensional model for particle dissolution in binary alloys.

    Vermolen, FJ., Javierre Perez, E., Vuik, C., Zhao, L. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 767-774 8 p.

    Research output: Contribution to journalArticleScientific

  351. An Introduction to Material Design Principles: Damage Preventation versus Damage Management

    van der Zwaag, S., 2007, Self Healing Materials an Alternative Approach to 20 Centuries of Materials Science. van der Zwaag, S. (ed.). Dordrecht: Springer, p. 1-18 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  352. An Investigation of the Self Healing Mechanism of Ionomer Based System

    Varley, R. J. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, AJM. & Zwaag, S. (eds.). Springer, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  353. Barrier free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel

    van Dijk, NH., Offerman, SE., Sietsma, J. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 4489-4498 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  354. Belastingssensor

    van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2007, IPC No. International publication date, Patent No. 1030620, Priority date 11 Jul 2007

    Research output: Patent

  355. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels.

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 6713-6723 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  356. Crack Healing of Advanced Machinable High Temperature Ti3AlC2 ceramics

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, A. J. M., Schmets, AJM., Zwaag, S. & Zwaag, S. (eds.). Springer, p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  357. Een nieuw materiaal ontwerp perspectief: zelf-hertellende materialen

    Mookhoek, SD. & van der Zwaag, S., 2007, In : De Constructeur. 1/2, p. 38-40 3 p.

    Research output: Contribution to journalArticleProfessional

  358. Experimental observations on the correlation between microstructure and fracture of multiphase steels

    Papaefthymiou, S., Prahl, U., Bleck, W., van der Zwaag, S. & Sietsma, J., 2007, In : International Journal of Materials Research. 97, 12, p. 1723-1731 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  359. Ferrite formation during slow continuous cooling in steel.

    Offerman, SE., Stranglund, H., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Poulsen, HF., Agren, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 357-362 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  360. Ionomer for Self Healing Applications

    Varley, R. J. & van der Zwaag, S., 2007, In : Leonardo times. p. 40-41 2 p.

    Research output: Contribution to journalArticleProfessional

  361. Laser beam welding of an Oxide Dispersion Strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  362. Laser beam welding of an oxide dispersion strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 5286-5295 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  363. Laser-ultrasonic monitoring of ferrite recovery in ultra-low carbon steel.

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 458, p. 391-401 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  364. Load Sensor

    van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2007, IPC No. International publication date, Patent No. WO 2007/073184 A1, Priority date 28 Jun 2007

    Research output: Patent

  365. Martensitic transformation of individual grains in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Scripta Materialia. 56, p. 421-424 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  366. Materials are Forever

    van der Zwaag, S., 2007, In : Kunststof Magazine. p. 30-30 1 p.

    Research output: Contribution to journalArticleProfessional

  367. Micro- and macroscale simulations of transformation-induced plasticity in multiphase carbon steels

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007.

    Research output: Contribution to conferenceAbstractScientific

  368. Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters

    Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Computational Materials Science. 41, p. 107-116 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  369. Micromechanics-based modelling of properties and failure of multiphase steels.

    Prahl, U., Papaefthymiou, S., Uthaisangsuk, V., Bleck, W., Sietsma, J. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 17-22 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  370. Modeling and simulations of transformation-induced plasticity in multiphase carbon steels at micro- and macrfoscopic scales

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, 10th EUROMAT Conference. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  371. Modelling Chi-Phase Precipitation in High Molybdenum Stainless Steels

    Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Advanced Materials Research. 15-17, p. 531-536 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  372. Modelling Deformation Structures in Metals Based on an Entropic Analysis

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 571-576 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  373. Modelling Dynamic Recovery and Recrystallization of Metals by a New Non-Equilibrium Thermodynamics Approach

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 558, p. 517-522 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  374. Modelling Steady State Deformation of FCC Metals by Non-Equilibrium Thermodynamics

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Technology. 23, 9, p. 1105-1108 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  375. Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe-Cr-Ni-Mo stainless steel

    Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 467, 1-2, p. 24-32 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  376. Modelling of the beta to alpha transformation in a metastable beta Ti alloy based on the kinetics and the morphology of the alpha plates.

    van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2007, In : International Journal of Materials Research. 98, 6, p. 476-484 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  377. On the nature of the growth of bainitic alpha plates in metastable beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 3684-3689 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  378. Onderzoek naar zichzelf reparerende materialen wint aan momentum

    van der Zwaag, S., 2007, In : Kunststof Magazine. 9, p. 32-35 4 p.

    Research output: Contribution to journalArticleProfessional

  379. Oxidation-induced crack healing in Ti3AlC2 ceramics

    Song, G., Pei, YT., Sloof, WG., Li, SB., Hosson, T. & van der Zwaag, S., 2007, In : Scripta Materialia. 58, p. 13-16 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  380. Piezoelectric and mechanical properties of novel composites of PZT and a liquid crytalline thermosetting resin

    van den Ende, D. A., de Almeida, P. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 15, p. 6417-6425 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  381. Positron annihilation spectroscopy as a tool to develop self healing in aluminium alloys

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera, A. & van Dijk, NH., 2007, In : Physica Status Solidi. C: Current Topics in Solid State Physics. 4, 10, p. 3469-3472 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  382. Route to stable non-spherical emulsion droplets

    Bon, SAF., Mookhoek, SD., Colver, PJ., Fischer, H. & van der Zwaag, S., 2007, In : European Polymer Journal. 43, 11, p. 4839-4842 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  383. Self healing materials: An alternative approach to 20 centuries of materials science

    van der Zwaag, S., 2007, Springer. 388 p.

    Research output: Book/ReportBook editingScientificpeer-review

  384. Self-Healing Barrier Coating Using an Expandable Phase

    Micciche, F., Fischer, H., Varley, R. J. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, AJM. & Zwaag, S. (eds.). Springer, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  385. Self-Healing in a NiTi Shape Memory Alloy Particulate Reinforced Aluminum Composite

    Thorat, RR., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, First International Conference on Self Healing. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  386. Self-heaing Ti4AIC2 ceramic, a promising high temperature material for aerospace engineering

    Song, G. & van der Zwaag, S., 2007, In : Leonardo times. 4, p. 22-23 2 p.

    Research output: Contribution to journalArticleProfessional

  387. Self-healing TI3AIC2 ceramic

    van der Zwaag, S., 2007, In : Leonardo times. p. 22-23 2 p.

    Research output: Contribution to journalArticleProfessional

  388. Solute and second phase evolution during industrial processing of AA3103.

    Miroux, AG., Lok, ZJ., Marthinsen, K. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 281-286 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  389. Synchrotron study on the martensitic transformation of individual grains

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE. & van der Zwaag, S., 2007.

    Research output: Contribution to conferenceAbstractScientific

  390. The Creation of High Aspect Ratio Capsules to Improve the Efficiency of Self-Healing Polymer Systems

    Mookhoek, SD., Colver, PJ., Fischer, H., Bon, SAF. & van der Zwaag, S., 2007, First International Conference on Self Healing. Schmets, A. J. M. & Zwaag, S. (eds.). Springer, p. 1-5 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  391. The Role of the Aging Temperature on the Self healing Kinetics in an Underaged AA2024 Aluminium Alloy

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera Diaz del Castillo, PEJ. & van Dijk, NH., 2007, First International Conference on Self Healing. Schmets, A. J. M. & Zwaag, S. (eds.). Springer, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  392. The role of aging temperatures in self healing aluminium alloys

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera, A. & van Dijk, NH., 2007, Proceedings Self Healing Materials conference. Noordwijk, p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  393. Warmwalzstrategien fur IF und TRIP stahle

    Elsner, A., Ponge, D., Raabe, D., Steinhoff, K. & van der Zwaag, S., 2007, 22nd Achener Stahltagung. RWTH Aachen (ed.). Germany: RWTH, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  394. 2008
  395. A Micro-Raman study on compressive failure in thermo-chemically modified aramid single filaments

    Knijnenberg, A., Dingemans, TJ. & van der Zwaag, S., 2008, Polymer Fibres 2008. Milford, Surrey: Meetings Management, p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  396. A computational model for studying coupled processes in wound healing for arbitrary wound geometries

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2008, p. 1-2. 2 p.

    Research output: Contribution to conferenceAbstractScientific

  397. A study on compressive failure in aramid based single filaments

    Knijnenberg, A., Dingemans, TJ. & van der Zwaag, S., 2008.

    Research output: Contribution to conferenceAbstractScientific

  398. Computational design of UHS stainless steel strengthened by multi-species nanoprecipitates combining genetic algorithms and Thermokinetics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, New Developments on Metallurgy and applications of high strength steels: Buenos Aires 2008. Warrendale: TMS, p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  399. Design of highly formable and strong titanium alloys through plasticity induced transformation

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, TMS 2008 Annual Meeting & Exhibition. Cerreta, E., Venkatesh, V. & Evans, D. (eds.). Warrendale, USA: TMS (The Minerals, Metals & Materials Society), p. 357-362 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  400. Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Computational Materials Science. 44, p. 678-689 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  401. Development of a quasi-static test method to investigate the origin of self-healing in ionomers under ballistic conditions

    Varley, R. J. & van der Zwaag, S., 2008, In : Polymer Testing. 27, 1, p. 11-19 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  402. Early stages of oxidation of Ti3AlC2 ceramics

    Song, G., Pei, YT., Sloof, WG., Li, SB., Hosson, T. & van der Zwaag, S., 2008, In : Materials Chemistry and Physics. 112, p. 762-768 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  403. Een nieuwe materiaalkundige benadering voor een duurzame en veilige maatschappij

    van der Zwaag, S., 2008, In : Impulsen voor Economie en Samenleving. p. 21-22 2 p.

    Research output: Contribution to journalArticleProfessional

  404. Fabrication and mechanical properties of electroconductive high temperature ZrC particle-reinforced Ti3AlC2 composites

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2008, In : Journal of Computational and Theoretical Nanoscience. 5, 8, p. 1725-1729 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  405. Genetic alloy design based on thermodynamics and kinetics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, 12, p. 1825-1833 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  406. Heal Thyself - Damage Management by Design

    Mookhoek, SD. & van der Zwaag, S., 2008, In : Plastics Innovations. 1, 44, p. 56-59 4 p.

    Research output: Contribution to journalArticleProfessional

  407. Irreversible thermodynamics modelling of plastic deformation of metals

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2008, In : Materials Science and Technology. 24, 4, p. 495-500 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  408. Isothermal martensitic transformation in a 12Cr-9Ni-4Mo-2Cu stainless steel in applied magnetic fields

    San Martin, D., Aarts, KWP., Rivera Diaz del Castillo, PEJ., van Dijk, NH., Brück, E. & van der Zwaag, S., 2008, In : Journal of Magnetism and Magnetic Materials. 320, p. 1722-1728 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  409. Moisture induced crack filling in barrier coatings containing montmorillonite as an expandable phase

    Micciche, F., Fischer, H., Varley, R. J. & van der Zwaag, S., 2008, In : Surface and Coatings Technology. 202, p. 3346-3353 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  410. Multi-capsule system and its use for encapsulating active agents

    WHITE, S. R., Mookhoek, SD., Fischer, H., van der Zwaag, S., Sottos, N. & Blaiszik, B. J., 2008, IPC No. application, Patent No. ILL19-121-US, Priority date 1 Jan 1800

    Research output: Patent

  411. Numerical modelling of epidermal wound healing

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2008, Numerical mathematics and advanced applications, proceedings of Enumath 2007. Kunisch, K., Of, G. & Steinbach, O. (eds.). Berlin-Heidelberg: Springer, p. 83-90 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  412. Ontwikkeling zelfherstellende materialen vertakt in meerdere onderzoekrichtingen

    van der Zwaag, S., 2008, In : Kunststof Magazine. 1, p. 32-34 3 p.

    Research output: Contribution to journalArticleProfessional

  413. Peripherally decorated binary microcapsules containing two liquids

    Mookhoek, SD., Blaiszik, B. J., Fischer, H., Sottos, N., WHITE, S. R. & van der Zwaag, S., 2008, In : Journal of Materials Chemistry. 18, p. 5390-5394 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  414. Polymeric material comprising multiple cavities

    Fischer, H., Mookhoek, SD. & van der Zwaag, S., 2008, IPC No. Nog niet eerder ingevoerd, Patent No. WO2008/125673 A1, Priority date 15 Apr 2008

    Research output: Patent

  415. Predicting the Strength and Ductility of Ultrafine Grained Interstitial Free Steels Using Irreversible Thermodynamics

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2008, New Developments on Metallurgy and Applications of High Strength Steels Buenos Aires 2008. s.n. (ed.). Buenos Aires: Materials Technology @ TMS, p. 805-812 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  416. Resolving Microstructural Changes during Ageing and Interrupted Ageing Using Thermoelectric Power

    Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, Aluminium Alloys, Proceedings of the 11th International Conference on Aluminium Alloys.. Hirsch, J., Skrotski, B., Gottstein, G. & Skrotzki, B. (eds.). Germany: Wiley-VCH, p. 763-769 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  417. Self healing of deformation damage in underaged Al-Cu-Mg alloys

    Hautakangas, SM., Schut, H., van Dijk, NH., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Scripta Materialia. 58, p. 719-722 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  418. Strength, deformation, and fracture: A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061.

    Risanti, DD., Rivera Diaz del Castillo, PEJ., Bahrami, A., Miroux, AG. & van der Zwaag, S., 2008, Aluminium alloys, their physical and mechanical properties.. Hirsch, J., Skrotzi, B. & Gottstein, G. (eds.). sl: Wiley-VCH, p. 1457-1463 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  419. Strength-toughness optimisation scenarios through interrupted ageing in AA6061 and AA2024

    Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, Annual TMS Meeting and Exhibition. Yin, W. & Das, S. K. (eds.). Warrendale, USA: Minerals, Metals and Materials Soc, p. 79-84 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  420. The isothermal martensite formation in a maraging steel: a magnetic study

    San Martin, D., van Dijk, NH., Brück, E. & van der Zwaag, S., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 481-482, p. 757-761 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  421. The role of nucleation behaviour in phase field simulations of the austenite to ferrite transformation.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2008, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 39A, p. 1237-1247 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  422. Toughening of a ZrC particle-reinforced Ti3AlC2 composite

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2008, Proceedings of the 32nd international conference & exposition on advanced ceramics and composites. Ohji, T. & Wereszczak, A. (eds.). Daytona Beach, USA: The American ceramic society, p. 31-40 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  423. Towards an understanding of thermally activated self-healing of an ionomer system during ballistic penetration

    Varley, R. J. & van der Zwaag, S., 2008, In : Acta Materialia. 56, 19, p. 5737-5750 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  424. Transformation-induced plasticity in multiphase steels subjected to thermal-mechanical loading

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, p. 3369-3387 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  425. Using Genetic algorithm to design new ultra-high strength stainless steels reinforced by separate precipitate families

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, European Stainless steels conference 2008. Karjalainen, P. & Hertzman, S. (eds.). Stockholm: Swedish Steel producers' Association, p. 259-267 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  426. Verf met klei

    van der Zwaag, S., 2008, In : Delft Integraal. 4, p. 4-4 1 p.

    Research output: Contribution to journalArticleProfessional

  427. Zelfherstellende materialen: een blik in de toekomst

    van der Zwaag, S., 2008, In : Kunststof Magazine. 2, p. 32-35 4 p.

    Research output: Contribution to journalArticleProfessional

  428. 2009
  429. A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  430. A constructive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Mechanics of Materials. 41, 9, p. 982-988 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  431. A mathematical analysis of physiological and morphological aspects of wound closure

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2009, In : Journal of Mathematical Biology. 59, p. 605-630 26 p.

    Research output: Contribution to journalArticleScientificpeer-review

  432. A microchechanical study of the deformation behavior of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  433. A micromechanical study of the deformation behaviour of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  434. A numerical study into the effect of elongated capsules on the healing efficiency of liquid-based systems

    Mookhoek, SD., Fisher, H. & van der Zwaag, S., 2009, In : Computational Materials Science. 47, p. 506-511 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  435. A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

    Risanti, DD., Yin, M., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 523, 1-2, p. 99-111 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  436. Analysis of fracture and healing processes in self-healing thermoplastic systems using quantitatieve x-ray microtomgraphy

    Mookhoek, SD., Mayo, SC., Hughes, A. E., Furman, SA., Fischer, H. & van der Zwaag, S., 2009, 14th international conference on deformation, yield and fracture of polymers. s.n. (ed.). London, UK: IOM communications, p. 317-320 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  437. Biderectional current-voltage converters based on magnetostrictive/piezoelectric composites

    Jia, Y., Or, SW., Chan, HL., Luo, H. & van der Zwaag, S., 2009, In : Japanese Journal of Applied Physics. Part 2, Letters & Express Lettres. 94, 263504, p. 1-3 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  438. Computational design of UHS maraging stainless steel incorporating compositions as well as austenisation and ageing temperatures as optimisation parameters

    Xu, W., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Philosophical Magazine (London, 2003). 89, 20, p. 1647-1661 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  439. Computing interfaces in diverse applications

    Javierre Perez, E., Vermolen, FJ., Vuik, C., Wesseling, P. & van der Zwaag, S., 2009, ECCOMAS Multidisciplinary jubilee symposium: New computational challenges in materials, structures, and fluids. Mang, H. A. & Periaux, J. (eds.). Berlin: Springer, p. 327-340 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  440. Design of novel high strength Titanium alloys on the basis of intentional plasticity induced transformations

    van der Zwaag, S., Rivera Diaz del Castillo, PEJ. & Neelakantan, S., 2009, In : Cbm Metal Matters. 14, p. 18-19 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  441. Eerste toepassingen selfhealing coatings over vijf jaar verwacht

    van der Zwaag, S. & Mol, A., 2009, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 3, p. 30-33 4 p.

    Research output: Contribution to journalArticleProfessional

  442. Genetic computational design of novel ultra high strength stainless steels: model description and first experimental validation

    Xu, W., del Castillo, PEJRD., Yang, K. & van der Zwaag, S., 2009, TMS 2009 138th annual meeting & exhibition - supplemental proceedings, vol 2: Materials characterization, computation andn modelling. s.n. (ed.). San Francisco, USA: TMS, p. 319-326 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  443. Increase in strength of beta Ti-10V-2Fe-3A1 alloy via Plasticity induced Transformation

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, IPC No. Aangevraagd door M2I en TU Delft, Priority date 1 Mar 2008

    Research output: Patent

  444. Liquid crystalline matrix polymres for aramid ballistic composites

    de Ruijter, C., van der Zwaag, S., stolze, R. & Dingemans, TJ., 2009, In : Polymer Composites. 31, 4, p. 612-619 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  445. Method for producing a titanium alloy article and an article procuced from a titanium alloy

    Neelakantan, S., van der Zwaag, S. & Rivera Diaz del Castillo, PEJ., 2009, IPC No. Aanvrager M2i en TU Delft, Patent No. 2002499, Priority date 9 Dec 2010

    Research output: Patent

  446. Modelling the steady state deformation stress under various deformation conditions using a single irreversible thermodynamics based formulation

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 12, p. 3431-3438 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  447. Modelling the strength of ultrafine-grained an nanocrystalline fcc metals

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2009, In : Scripta Materialia. 61, p. 1113-1116 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  448. On measurement of retained austenite in multiphase TRIP steels - results of blind round robin test involving six different techniques.

    Jacques, PJ., Allain, S., Bouaziz, O., De, A., Gourgues, A-F., Hance, BM., Houbaert, Y., Huang, J., Iza-Mendia, A., Kruger, S. E., Radu, M., Samek, L., Speer, J., Zhao, L. & van der Zwaag, S., 2009, In : Materials Science and Technology. 25, 5, p. 567-574 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  449. On the production and properties of novel particulate niti/AA2124 metal matrix composites

    San Martin, D., Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 250`-252

    Research output: Contribution to journalArticleScientificpeer-review

  450. On the production and properties of novel particulate nitip/aa2124 metal matrix composites

    San Martin, D., Risanti, DD., Garces, G., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 526, 1-2, p. 250-252 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  451. On the transformation behaviour of niti particulate reinforced aa2124 composites

    Thorat, RR., Risanti, DD., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Journal of Alloys and Compounds. 477, p. 307-315 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  452. Phase-field simulations of coarsening of Al6Mn precipitates located on grain boundaries in Al alloys.

    Moelens, N., Miroux, AG., Anselmino, E., van der Zwaag, S., Blanpain, B. & Wollants, P., 2009, Supplemental Proceedings of the 2009 TMS Annual Meeting & Exhibition: Materials Characterization, Computation and Modeling.. s.n. (ed.). Warrendale, US: The Minerals, Metals & Materials Society (TMS), p. 303-310 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  453. Plasticity induced transformation in a metastable beta Ti-1023 alloy by controlled heat treatments

    Neelakantan, S., San Martin Fernandez, DM., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Technology. 25, 11, p. 1351-1358 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  454. Polymeric material having an anisotropic shape, useful in the composite material, which is useful to make an article, comprises multiple cavities comprising a functionsl liquid, which is dicyclopentadiene monomer

    Fischer, H., Mookhoek, SD. & van der Zwaag, S., 2009, IPC No. Patent Assignee(s): Stichting Dutch Polymer Inst. (DUP-Non-standard), Patent No. WO2008125673-A1, Priority date 23 Oct 2008

    Research output: Patent

  455. Predicting the stress-strain behaviour of carbon steel under hot working conditions: an irreversible thermodynamics model

    Huang, M., del Castillo, PEJRD., Perlade, A. & van der Zwaag, S., 2009, In : Scripta Materialia. 61, 6, p. 648-651 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  456. Prediction of the martensite start temperature for beta titanium alloys as a function of composition

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Scripta Materialia. 60, 8, p. 611-614 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  457. Self-healing behaviour in man-made engineering materials: bio-inspired but taking into account their intrinsic character

    van der Zwaag, S., van Dijk, NH., Jonkers, HM., Mookhoek, SD. & Sloof, WG., 2009, In : Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences. 367, p. 1689-1704 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  458. Structure and properties of aramid fibres

    van der Zwaag, S., 2009, Handbook of textitle fibre structure. M Jaffe SJ Eichhorn, JWS. H. (ed.). UK: Woodhead Publishing, p. 394-412 508 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  459. The composition and temperature effects on the ultra high strength stainless steel design

    Xu, W., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : International Journal of Modern Physics B: condensed matter physics: statistical physics: applied physics. 23, 6-7, p. 1060-1065 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  460. The effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 5, p. 533-543 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  461. Toughening of a ZrC particle-reinforced Ti3AlC2 composite

    Song, G., Xu, Q., Sloof, W. G. & van der Zwaag, S., 2009, Mechanical properties and processing of ceramic binary, ternary and composite systems. s.n. (ed.). Daytona Beach, Florida, USA: Wiley, p. 31-39 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  462. 2010
  463. A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Yan, W., Yang, K., San Martin, D., van der Zwaag, S. & Kestens, LAI., 2010, In : Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  464. Application of the cyclic phase tranformation concept for investigating growth kinetics of solid-state partitioning phase transformations

    Chen, H. & van der Zwaag, S., 2010, In : Computational Materials Science. 49, p. 801-813 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  465. Applying SEM-Based X-ray microtomography to observe self-healing in solvent encapsulated thermoplastic materials

    Mookhoek, SD., Mayo, SC., Hughes, A. E., Furman, SA., Fischer, H. & van der Zwaag, S., 2010, In : Advanced Engineering Materials. 12, 3, p. 228-234 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  466. Autonomous damage initiated healing in a thermo-responsive ionomer

    Varley, R. J. & van der Zwaag, S., 2010, In : Polymer International. 59, 8, p. 1031-1038 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  467. Characterization of the adhesion of single-walled carbon nanotubes in poly (p-phenylene terephthalamide) composite fibres

    Deng, L., Young, RJ., van der Zwaag, S. & Picken, SJ., 2010, In : Polymer. 51, p. 2033-2039 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  468. Characterization of ultra-high temperature ablation of Ti2AlC ceramics under oxyacetylene flame

    Song, G., Li, S., Zhao, C., Sloof, WG., van der Zwaag, S., Pei, YT. & Hosson, T., 2010, Proceedings of the 7th International Conference on High Temperature Ceramic Materials and Composites. Krenkel, W. & Lamon, J. (eds.). Berlijn: AVISO Verlagsgesellschaft, p. 806-811 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  469. Development of temperature stable charge based piezoelectric composite quasi-static pressure sensors

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2010, In : Sensors and Actuators A: Physical: an international journal devoted to research and development of physical and chemical transducers. 163, 1, p. 25-31 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  470. Fabricacion y caracterizacion de un nuevo material compuesto AA2124/nitip

    San Martin, D., Risanti, DD., Garces, G., Alcala, G., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2010, Proceedings of: XI Congreso Nacional de Materiales. Barreda, JJS. (ed.). Zaragoza, Spain: Universitat Jaume-1, p. 1-4 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  471. Genetic alloy design of ultra high strength stainless steels: from thermodynamics to quantum mechanics

    Rivera Diaz del Castillo, PEJ., Xu, W. & van der Zwaag, S., 2010, In : Materials Science Forum. 638-642, Part 1-4, p. 3473-3478 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  472. Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by ni3ti intermetallic nanprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Wang, W., Bliznuk, V., Kestens, LAI. & van der Zwaag, S., 2010, In : Acta Materialia. 58, 10, p. 3582-3593 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  473. Improving the d(33) and g(33) properties of 0-3 piezoelectric composites by dielectrophoresis

    van den Ende, DA., bory, BF., Groen, WA. & van der Zwaag, S., 2010, In : Journal of Applied Physics. 107, 2

    Research output: Contribution to journalArticleScientificpeer-review

  474. In situ determination of aging precipitation in deformed Fe-Cu and Fe-Cu-B-N alloys by time-resolved small-angle neutron scattering

    He, S., van Dijk, NH., Paladugu, MC., Schut, H., Kohlbrecher, J., Tichelaar, FD. & van der Zwaag, S., 2010, In : Physical Review B (Condensed Matter and Materials Physics). 82, 174111, p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  475. Kansen op herstel

    van der Zwaag, S., 2010, Consensor 2.0 Kansen in beton/inspelen op trends en ontwikkelingen. Rotterdam: ConSensor BV, p. 9-11

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterPopular

  476. Mechanical properties of low temperature synthesized dense and fine-grained cr2alc ceramics

    Li, SB., Yu, WB., Zhai, HX., Song, G., Sloof, WG. & van der Zwaag, S., 2010, In : Journal of the European Ceramic Society. 31, 1-2, p. 217-224 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  477. Properties of quasi 1-3 piezoelectric pzt-epoxy composites obtained by dielectrophoresis

    van den Ende, DA., bory, BF., Groen, WA. & van der Zwaag, S., 2010, In : Integrated Ferroelectrics. 114, 1, p. 108-118 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  478. Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach

    Xu, W. & van der Zwaag, S., 2010, Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach. DeArdo, AJ. & Pontremoli, M. (eds.). Peschiera del Garda (Verona), Italy: Associazione Italiana di Metallurgia, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  479. Real-time martensitic transformation kinetics in maraging steel under high magnetic fields

    San Martin, D., van Dijk, NH., Jimenez-Melero, E., Kampert, E., Zeitler, U. & van der Zwaag, S., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 527, 20, p. 5241-5245 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  480. Routes and mechanisms towards self healing behaviour in engineering materials

    van der Zwaag, S., 2010, In : Bulletin of The Polish Academy of Sciences. . Technical Sciences. 58, 2, p. 215-224 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  481. Self-healing in nanoparticle-reinforced and other polymer systems

    Picken, SJ., Mookhoek, SD., Fischer, H. & van der Zwaag, S., 2010, Optimization of polymer of polymer nanocomposite properties. Mittal, V. (ed.). Weinheim: Wiley-VCH, p. 261-278 418 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  482. Self-healing materials

    Hager, MD., Greil, P., Leyens, C., van der Zwaag, S. & Schubert, US., 2010, In : Advanced Materials. 22, p. 5424-5430 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  483. Teaching ethics to engineering students: from clean concepts to dirty tricks: the impact of practical circumstances and personal relationships on ethical decision-making

    Kroesen, JO. & van der Zwaag, S., 2010, Philosophy and engineering: an emerging agenda. Goldberg, DE. & van de Poel, IR. (eds.). Dordrecht / New York / Berlin: Springer, p. 127-137 361 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  484. The effect of cluster plasticisation on the self healing behaviour of ionomers

    Varley, R. J., Shen, S. & van der Zwaag, S., 2010, In : Polymer. 51, 3, p. 679-686 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  485. The generation of deformation damage during fatigue loading in Al-Cu alloy studied by the Doppler Broadening technique

    Ruiz Ripoll, ML., Schut, H., Alderliesten, RC., van der Zwaag, S. & Benedictus, R., 2010, 12th International Workshop on Slow Positron Beam Techniques SLOPOS 12. Buckman, S. (ed.). Magnetic Island, N.Queensland, Australia: ARC Centre of Excellence for Antimatter-Matter Studies, p. 1-4 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  486. The influence of the lateral filament texture on the compressive properties of pppta aramid filaments

    Knijnenberg, A., Koenders, BM., Gebben, B., Klop, E., Young, RJ. & van der Zwaag, S., 2010, In : Journal of Materials Science. 45, 10, p. 2708-2714 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  487. The mechanical properties of aa2024 as funcion of the interrupted ageing conditions

    Risanti, DD., Yin, M., Chen, J. & van der Zwaag, S., 2010, In : Materials Science Forum. p. 638-642 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  488. Thermally activated precipitation at deformation induced defects in Fe-Cu and Fe-Cu-B-N alloys studied by positron annihilation spectroscopy

    He, S., van Dijk, NH., Schut, H., Peekstok, ER. & van der Zwaag, S., 2010, In : Physical Review B (Condensed Matter and Materials Physics). 81, 094103, p. 094103-1-094103-10

    Research output: Contribution to journalArticleScientificpeer-review

  489. Towards the development of self healing aluminium alloys to enhance the lifetime of components under fatigue load

    Ruiz Ripoll, ML., Schut, H., van der Zwaag, S., Alderliesten, RC. & Benedictus, R., 2010, Proceedings of the 18th European Conference on Fatigue. s.n. (ed.). s.l.: IOP Self Healing Materials, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  490. 2011
  491. A critical appraisal of the potential of self healing polymeric coatings

    Garcia Espallargas, SJ., Fisher, H. & van der Zwaag, S., 2011, In : Progress in Organic Coatings. 72, 3, p. 211-221 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  492. A mixed-mode model considering soft impingement effects for solid-state partitioning phase transformations

    Chen, H. & van der Zwaag, S., 2011, Solid-Solid phase transformations in inorganic materials. Brechet, Y., Clouet, E., Deschamps, A., Finel, A. & Soisson, F. (eds.). Trans Tech Publications, p. 561-566 6 p. (Solid State Phenomena; vol. 172-174).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  493. Alternatieven voor zeldzame grondstoffen ontwerpen; Vervangingstechniek

    van der Zwaag, S., 2011, In : De Ingenieur. p. 20-22 3 p.

    Research output: Contribution to journalArticleProfessional

  494. Application of cyclic partial phase transformations for identifying kinetic transitions during solid-state phase transformations: Experiments and modeling

    Chen, H., Appolaire, B. & van der Zwaag, S., 2011, In : Acta Materialia. 59, 17, p. 6751-6760 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  495. First-principles and genetic modelling of precipitation sequences in aluminium alloys

    de Jong, M., Dutta, RK., Sluiter, MHF., Miroux, AG., van der Zwaag, S., Sietsma, J. & Rivera Diaz del Castillo, PEJ., 2011, In : Solid State Phenomena. 172-174, p. 285-290 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  496. Herstel zonder onderhoud

    van der Zwaag, S., 2011, In : Maintenance Management. 10, p. 34-35 2 p.

    Research output: Contribution to journalArticleProfessional

  497. In situ synchrotron study on the interplay between martensite formation, texture evolution and load partitioning in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Wright, JP. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 6407-6416 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  498. Influence of alpha morphology and volume fraction on the stress-induced martensitic transformation in Ti-10V-2Fe-3Al

    Li, C., Wu, X., Chen, H. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, 18, p. 5854-5860 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  499. Invited topical review: Liquid crystal main-chain polymers for high-performance fibre applications

    Picken, SJ., Sikkema, DJ., Boerstoel, H., Dingemans, TJ. & van der Zwaag, S., 2011, In : Liquid Crystals: an international journal in the field of anisotropic fluids. 38, p. 1591-1605 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  500. Microstructural control of the austenite stability in low-alloyed trip steels

    Blonde, RJP., Jimenez, E., van Dijk, NH., Brueck, EH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2011, In : Solid State Phenomena. 172-174, p. 196-201 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  501. Modeling of soft impingement effect during solid-state partitioning phase transformations in binary alloys

    Chen, H. & van der Zwaag, S., 2011, In : Journal of Materials Science. 46, 5, p. 1328-1336 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  502. Modelling the strongest grain size in nanocrystalline FCC metals

    Huang, M., Bouaziz, O. & van der Zwaag, S., 2011, In : Materials Letters. 65, p. 3128-3130 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  503. Numerical modelling of the self healing response of coatings based on expansive phases

    Javierre, E., Rey, R., Perez, MA., Garcia Espallargas, SJ., van der Zwaag, S. & Garcia-Aznar, JM., 2011, Proceedings of CMNE 2011. Rodriguez-Ferran, A. (ed.). Coimbra, Portugal: CMNE, p. 2220-2225 6 p. (Surface and Coatings Technology; vol. 206).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  504. Parametric study of multiphase TRIP steels undergoing cyclic loading

    Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR. & van der Zwaag, S., 2011, In : Computational Materials Science. 50, 2011, p. 1490-1498 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  505. Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach

    Xu, W. & van der Zwaag, S., 2011, In : ISIJ International. 51, 6, p. 1005-1010 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  506. Synthesis and characterization of silica microcapsules using a sustainable solvent system template

    Galgali, GS., Schlangen, E. & van der Zwaag, S., 2011, In : Materials Research Bulletin. 46, 12, p. 2445-2449 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  507. The effect of calcining temperature on the properties of 0-3 piezoelectric composites of PZT and a liquid crystalline thermosetting polymer

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2011, In : Journal of Electroceramics. 27, 1, p. 13-19 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  508. The generation of derformation damage during fatigue loading in AL-Cu alloy studied by the doppler broadening technique

    Ruiz-Ripoll, ML., Schut, H., van Dijk, NH., Alderliesten, RC., van der Zwaag, S. & Benedictus, R., 2011, Proceedings of SLOPOS 12. Buckman, S. (ed.). Magnetic Island, Australia: IOPscience, p. 1-4 4 p. (Journal of Physics: Conference Series; vol. 262).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  509. Ultra-high temperature ablation behavior of Ti2AlC ceramics under an oxyacetylene flame

    Song, G., Li, S., Zhao, C., Sloof, WG., van der Zwaag, S., Pei, YT. & Hosson, T., 2011, In : Journal of the European Ceramic Society. 31, p. 855-862 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  510. Zelfherstellende materialen

    van der Zwaag, S., 2011, In : Asfalt. 1, 38, p. 13-14 2 p.

    Research output: Contribution to journalArticleProfessional

  511. 2012
  512. Ab-initio modeling of metastable precipitation processes in aluminum 7xxx alloys

    de Jong, M., van der Zwaag, S. & Sluiter, MHF., 2012, In : International Journal of Materials Research. 103, 8, p. 972-979 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 Next

ID: 142717