1. Article › Scientific › Not peer-reviewed
  2. A physics-based transformation model for low-carbon steels: from first principles to on-line application

    van Leeuwen, Y., Luinenburg, A. W., Onink, M., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientific

  3. A three-dimensional model for particle dissolution in binary alloys.

    Vermolen, FJ., Javierre Perez, E., Vuik, C., Zhao, L. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 767-774 8 p.

    Research output: Contribution to journalArticleScientific

  4. Deeltjes oplossen tijdens homogeniseren van aluminium-legeringen

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1995, In : Materialen. 1, p. 25-28 4 p.

    Research output: Contribution to journalArticleScientific

  5. Flow stress prediction during intercritical deformation of a low-carbon steel with a rule of mixtures and Fe-simulations.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Scripta Metallurgica. 45, p. 875-882 8 p.

    Research output: Contribution to journalArticleScientific

  6. Microstructuur en kinetiek tijdens het partieel gloeien van twee commerciële niet-hardbare aluminiumlegeringen

    Sontgerath, JAH., van Mourik, P., van der Zwaag, S. & Korevaar, BM., 1996, In : Materialen. 1, p. 21-27 7 p.

    Research output: Contribution to journalArticleScientific

  7. Review on some Stefan Problems for Particle Dissolution in Solid Metallic Alloys

    Vermolen, FJ., Vuik, C., Javierre Perez, E. & van der Zwaag, S., 2005, In : Nonlinear Analysis: modelling and control (online). 10, 3, p. 257-292 36 p.

    Research output: Contribution to journalArticleScientific

  8. The application of reversed torsion deformation to the study of the austenite to ferrite phase transformation in steels

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : Scripta Materialia. 46, p. 413-417 5 p.

    Research output: Contribution to journalArticleScientific

  9. The dependence of the B-AlFeSi to x-Al(FeMn)Si transformation kinetics in Al-Mg-Si alloys on the alloying elements

    Kuijpers, NCW., Vermolen, FJ., Vuik, C., Koenis, PTG., Nilsen, KE. & van der Zwaag, S., 2005, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 395, p. 9-19 11 p.

    Research output: Contribution to journalArticleScientific

  10. The gamma-alpha transformation kinetics of low carbon steels under ultra-fast cooling condition.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientific

  11. Article › Scientific › Peer-reviewed
  12. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. 3DXRD microscopy for the study of solid-state phase transformation kinetics.

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. A 2D analysis of the competition between the equiaxed ferritic and the bainitic morphology based on a Gibbs energy balance approach

    Yang, Z., Xu, W., Yang, Z., Zhang, C. & van der Zwaag, S., 2016, In : Acta Materialia. 105, February, p. 317-327 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. A New Approach Toward Metal-Free Self-Healing Ionomers Based on Phosphate and Methacrylate Containing Copolymers

    Dahlke, J., Bose, R. K., Zechel, S., Garcia, S. J., van der Zwaag, S., Hager, M. D. & Schubert, U. S., 1 Dec 2017, In : Macromolecular Chemistry and Physics. 218, 23, 9 p., 1700340.

    Research output: Contribution to journalArticleScientificpeer-review

  17. A Novel Approach for Controlling the Band Formation in Medium Mn Steels

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 6, p. 1998–2010 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. A Statistical Mechanics Theory of Grain Deformation and its Prediction of Dynamical Recovery and Recrystallization

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 87-92 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. A cohesive-zone crack healing model for self-healing materials

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2018, In : International Journal of Solids and Structures. 134, p. 249-263

    Research output: Contribution to journalArticleScientificpeer-review

  20. A combined EIS and x-ray computed tomography study of the effect of a silyl ester on delamination and underfilm pit formation in a coated AA7050 sample

    Garcia Espallargas, SJ., Wu, X. & van der Zwaag, S., 2014, In : Corrosion Engineering, Science and Technology. 70, 5, p. 475-482 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. A combined electrochemical impedance spectroscopy and x-ray-computed tomography study of the effect of a silyl ester on delamination and underfilm pit formation in a coated AA7050 sample

    Garcia Espallargas, SJ., Wu, X. & van der Zwaag, S., 2014, In : Corrosion: journal of science and engineering. 70, 5, p. 475-482 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. A comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of AA1050

    Chen, SP. & van der Zwaag, S., 2004, In : Journal of Testing and Evaluation. 32, 4, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. A comparative study of the microstructure and mechanical properties of ¿ + ß titanium alloys

    Li, C., Chen, J., Wu, X. & van der Zwaag, S., 2014, In : Metal Science and Heat Treatment. 56, 7-8, p. 374-380 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. A comparison of numerical models for one-dimensional Stefan problems

    Javierre Perez, E., Vuik, C., Vermolen, FJ. & van der Zwaag, S., 2006, In : Journal of Computational and Applied Mathematics. 192, p. 445-459 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. A conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage

    Farle, AM., Kwakernaak, C., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 1, p. 37-45 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. A constructive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Mechanics of Materials. 41, 9, p. 982-988 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. A critical appraisal of fracture toughness measurements on AA6061 and an Al203-particle reinforced AA6061 alloy for various heat treatments

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. A critical appraisal of fracture toughness measurements on AA6061 and an Al2O3 particle reinforced AA6061 alloy for various heat treatments.

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. A critical appraisal of the potential of self healing polymeric coatings

    Garcia Espallargas, SJ., Fisher, H. & van der Zwaag, S., 2011, In : Progress in Organic Coatings. 72, 3, p. 211-221 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. A deconvolution protocol of the mechanical relaxation spectrum to identify and quantify individual polymer feature contributions to self-healing

    Montano, V., Picken, S. J., Van Der Zwaag, S. & Garcia, S. J., 2019, In : Physical Chemistry Chemical Physics. 21, 19, p. 10171-10184 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. A discussion on the atomic mechanism of the bainitic reaction in TRIP steels

    van der Zwaag, S. & Wang, J., 2002, In : Scripta Materialia. 47, p. 169-173 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. A filiform corrosion and potentiodynamic polarisation study of some aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, 7, p. 1629-1639 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe-C-M alloys

    Chen, H. & van der Zwaag, S., 2014, In : Acta Materialia. 72, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. A material genomic design of advanced high performance, noncorroding steels for ambient and high temperature applications

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Materials Science Forum. 783-786, p. 1201-1206 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. A mathematical analysis of physiological and morphological aspects of wound closure

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2009, In : Journal of Mathematical Biology. 59, p. 605-630 26 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. A mathematical approach to epidermal wound healing: Model Analysis and Computer Simulations

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2007, In : Reports of the Department of Applied Mathematical Analysis. 07, 14, p. 1-19 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. A mathematical model for the dissolution kinetics of Mg2Si-phases in Al-Mg-Si alloys during homogenisation under industrial conditions.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 254, p. 13-32 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. A mathematical model for the dissolution of stoichiometric particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 328, p. 14-25 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. A metal salt dependent self-healing response in supramolecular block copolymers

    Enke, M., Bose, R. K., Bode, S., Vitz, J., Schacher, F. H., Garcia Espallargas, S. J., Van Der Zwaag, S., Hager, M. D. & Schubert, U. S., 22 Nov 2016, In : Macromolecules. 49, 22, p. 8418-8429 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. A metallographic analysis of intercritically deformed C-Mn steel subjected to complex strain histories

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : ISIJ International. 42, 4

    Research output: Contribution to journalArticleScientificpeer-review

  43. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. A microchechanical study of the deformation behavior of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 2, p. 533-545 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. A micromechanical study of the deformation behaviour of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. A microstructural model for predicting hardness profiles of Fe-Cr alloys after nitriding.

    Braam, JJ. & van der Zwaag, S., 1999, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 79, 5, p. 1193-1206 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. A model of the beta-AlFeSi to alpha-Al(FeMn)Si transformation in Al-Mg-Si alloys

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Transactions. 44, 7, p. 1448-1456 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. A morphological study of filiform corrosive attack on cerated AA2024-T351 alluminium alloy

    Hughes, A. E., Mol, JMC., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, p. 107-124 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. A morphological study of filiform corrosive attack on chromated and alkaline-cleaned AA2024-T351 aluminium alloy

    Mol, JMC., Hughes, A. E., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 46, 5, p. 1201-1224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. A nano-indentation study on the mechanical behaviour of the matrix material in an AA6061-Al2O3 MMC.

    Mussert, KM., Vellinga, WP., Bakker, A. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 789-794 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. A new etching route for reveailing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

    San Martin, D., Rivera Diaz del Castillo, PEJ., Peekstok, ER. & van der Zwaag, S., 2007, In : Materials Characterization. 58, p. 455-460 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Yan, W., Yang, K., San Martin, D., van der Zwaag, S. & Kestens, LAI., 2010, In : Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. A novel 2D analysis method to study individual grains using high-energy X-ray microbeam diffraction

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2007, In : Advances in X-Ray Analysis. 51, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels

    Xu, X., van der Zwaag, S. & Xu, W., 2015, In : Wear. 322-323, January, p. 51-60 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 9, p. 2789-2797 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. A numerical study into the effect of elongated capsules on the healing efficiency of liquid-based systems

    Mookhoek, SD., Fisher, H. & van der Zwaag, S., 2009, In : Computational Materials Science. 47, p. 506-511 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 595-602 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. A rheological and spectroscopic study on the kinetics of self-healing in a single component diels-alder copolymer and its underlying chemical reaction

    Bose, RK., Kotteritzsch, J., Garcia Espallargas, SJ., Hager, MD., Schubert, US. & van der Zwaag, S., 2014, In : Journal of Polymer Science. Part A, Polymer Chemistry. 52, 12, p. 1669-1675 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. A single grain approach applied to the modeling of recrystallization kinetics for cold rolled single-phase metals

    Chen, SP. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35(A), 3, p. 741-749 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. A statistical evaluation of the staircase and the ArcSin SQRT(P) method for determining the fatigue limit.

    Braam, JJ. & van der Zwaag, S., 1998, In : Journal of Testing and Evaluation. 26, 2, p. 125-131 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. A strain based computational design of austenitic creep resistant steel with an improved precipitation hardening

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Acta Materialia. 64, p. 133-143 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. A strain-based computational design of creep-resistant steels

    Lu, Q., Xu, W. & van der Zwaag, S., 2013, In : Acta Materialia. 64, feb 2014, p. 133-143 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys.

    Wits, JJ., Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 283, p. 234-241 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. A study on the beta' and beta" formation kinetics in AA6063 using differential scanning calorimetry

    van de Langkruis, J., Vossenberg, MS., Kool, WH. & van der Zwaag, S., 2003, In : Journal of Materials Engineering and Performance. vol. 12, No. 4, p. 408-413 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. A study on the fracture toughness of Al-based MMCs containing different volume fractions Al2O3.

    Duwel, AHC., Mussert, KM., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Materials Science Letters. 20, p. 1147-1150 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

    Risanti, DD., Yin, M., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 523, 1-2, p. 99-111 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. A temperature oscillation instrument to determine pyroelectric properties of materials at low frequencies: Towards elimination of lock-in methods

    Khanbareh, H., Schelen, JBJ., van der Zwaag, S. & Groen, WA., 2015, In : Review of Scientific Instruments. 86, 10, p. 105111-1-105111-5

    Research output: Contribution to journalArticleScientificpeer-review

  70. A three-dimensional model for the development of the microstructure in steel during slow cooling

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 2000, 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. A three-dimensional model for the development of the microstructure in steel during slow cooling.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. A translation of the structure of mussel byssal threads into synthetic materials by the utilization of histidine-rich block copolymers

    Enke, M., Bose, R. K., Zechel, S., Vitz, J., Deubler, R., Garcia, S. J., Van Der Zwaag, S., Schacher, F. H., Hager, M. D. & Schubert, U. S., 7 Jul 2018, In : Polymer Chemistry. 9, 25, p. 3543-3551 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Ab-initio modeling of metastable precipitation processes in aluminum 7xxx alloys

    de Jong, M., van der Zwaag, S. & Sluiter, MHF., 2012, In : International Journal of Materials Research. 103, 8, p. 972-979 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Abrasion resistance characterization of low alloy construction steels: A comparison between three different scratch test protocols

    Xu, X., van der Zwaag, S. & Xu, W., 15 Aug 2017, In : Wear. 384-385, p. 106-113 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Acomparative study of the microstructure and mechanical properties of ¿+ß titanium alloys

    Li, C., Chen, H., Wu, X. & van der Zwaag, S., 2013, In : Metal Science and Heat Treatment.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Acylhydrazones as reversible covalent crosslinkers for self-healing polymers

    Kuhl, N., Bode, S., Bose, RK., Vitz, J., Seifert, A., Hoeppener, S., Garcia Espallargas, SJ., Spange, S., van der Zwaag, S., Hager, MD. & Schubert, US., 2015, In : Advanced Functional Materials. 25, 22, p. 3295-3301 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Adhesion and long-term barrier restoration of intrinsic self-healing hybrid sol-gel coatings

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, In : ACS Applied Materials and Interfaces. 8, 6, p. 4126-4136 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Alginate fibres containing discrete liquid filled vacuoles for controlled delivery of healing agents in fibre reinforced composites

    Mookhoek, SD., Fischer, H. & van der Zwaag, S., 2012, In : Composites Part A: Applied Science and Manufacturing. 43, 12, p. 2176-2182 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. An Overview of the Cyclic Partial Austenite-Ferrite Transformation Concept and Its Potential

    Chen, H. & van der Zwaag, S., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 6, p. 2720–2729 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. An analytical approach to model heterogonous recrystallization kinetics taking into account the natural spatial inhomogeneity of deformation

    Luo, H. & van der Zwaag, S., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 1, p. 231-238 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. An in-situ LSCM study on bainite Formation in a Fe-0.2C-1.5Mn-2.0Cr Alloy

    Sainis, S., Farahani, H., Gamsjäger, E. & van der Zwaag, S., 2018, In : Metals. 8, 7, 22 p., 498.

    Research output: Contribution to journalArticleScientificpeer-review

  82. An integrated study on the effect of pre- and post-extrusion heat treatments and surface treatment on the filiform corrosion properties of an aluminium extrusion alloy

    Mol, JMC., van de Langkruis, J., de Wit, JHW. & van der Zwaag, S., 2005, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, 11, p. 2711-2730 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Analysis and experimental validation of the figure of merit for piezoelectric energy harvesters

    Deutz, D. B., Pascoe, J. A., Schelen, B., Van Der Zwaag, S., De Leeuw, D. M. & Groen, P., 1 May 2018, In : Materials Horizons. 5, 3, p. 444-453 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Analysis of ferrite growth retardation induced by local Mn enrichment in austenite created by prior interface passage

    Chen, H. & van der Zwaag, S., 2013, In : Acta Materialia. 61, 4, p. 1338-1349 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling.

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 1431-1440 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Analysis of the fractal dimension of grain boundaries of AA7050 aluminum alloys and its relationship to fracture toughness

    Khanbareh, H., Wu, X. & van der Zwaag, S., 2012, In : Journal of Materials Science. 47, 17, p. 6246-6253 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  87. Analysis of the grain size evolution for ferrite formation in Fe-C-Mn steels using a 3D model under a mixed-mode interface condition

    Fang, H., Mecozzi, M. G., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 1, p. 41-53

    Research output: Contribution to journalArticleScientificpeer-review

  88. Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy

    Dong, H., Chen, H., Wang, W., Zhang, Y., Miyamoto, G., Furuhara, T., Zhang, C., Yang, Z. & van der Zwaag, S., 1 Oct 2018, In : Acta Materialia. 158, p. 167-179 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Analysis of the mobility of migrating austenite-ferrite interfaces

    Gamsjager, E., Wiessner, M., Schider, S., Chen, H. & van der Zwaag, S., 2015, In : Philosophical Magazine (London, 2003). 95, 26, p. 2899-2917 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Analysis of the stagnant stage in diffusional phase transformations starting from austenite¿ferrite mixtures

    Chen, H., Goune, M. & van der Zwaag, S., 2012, In : Computational Materials Science. 55, p. 34-43 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Analysis of the state of poling of lead zirconate titanate (PZT) particles in a Zn-ionomer composite

    James, NK., Comyn, T., Hall, D., Daniel, L., Kleppe, A., van der Zwaag, S. & Groen, WA., 2016, In : Ferroelectrics. 493, 1, p. 139-150 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Analysis of the structure and resulting mechanical properties of aluminium extrusions containing a charge weld interface

    den Bakker, AJ., Katgerman, L. & van der Zwaag, S., 2016, In : Journal of Materials Processing Technology. 229, March, p. 9-21 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Analysis of the y - a transformation in a C-Mn steel by phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2005, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 36A, (9), p. 2327-2340 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Analysis of transformation stasis during the isothermal bainitic ferrite formation in Fe-C-Mn and Fe-C-Mn-Si alloys.

    Chen, H., Zhu, K., Zhao, L. & van der Zwaag, S., 2013, In : Acta Materialia. 61, p. 5458-5468 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Analytical approach to particle dissolution in a finite medium

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1997, In : Materials Science and Technology. 13, p. 308-312 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Anisotropic dilatation behaviour during transformation of hot rolled steels showing banded structure.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Technology. 17, 12, p. 1569-1574 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Application of cyclic partial phase transformations for identifying kinetic transitions during solid-state phase transformations: Experiments and modeling

    Chen, H., Appolaire, B. & van der Zwaag, S., 2011, In : Acta Materialia. 59, 17, p. 6751-6760 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Application of interrupted cooling experiments to study the mechanism of bainitic ferrite formation in steels

    Chen, H., Borgenstam, A., Odqvist, J., Zuazo, I., Goune, M., Agren, J. & van der Zwaag, S., 2013, In : Acta Materialia. 61, 12, p. 4512-4523 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Application of the cyclic phase tranformation concept for investigating growth kinetics of solid-state partitioning phase transformations

    Chen, H. & van der Zwaag, S., 2010, In : Computational Materials Science. 49, p. 801-813 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

    Gamsjager, E., Chen, H. & van der Zwaag, S., 2014, In : Computational Materials Science. 83, p. 92-100 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Application of the energy release rate approach for delamination growth in Glare

    Alderliesten, RC., Schijve, J. & van der Zwaag, S., 2005, In : Engineering Fracture Mechanics. p. 1-13 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 Next

ID: 142717