1. Article › Scientific › Not peer-reviewed
  2. A physics-based transformation model for low-carbon steels: from first principles to on-line application

    van Leeuwen, Y., Luinenburg, A. W., Onink, M., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientific

  3. A three-dimensional model for particle dissolution in binary alloys.

    Vermolen, FJ., Javierre Perez, E., Vuik, C., Zhao, L. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 767-774 8 p.

    Research output: Contribution to journalArticleScientific

  4. Deeltjes oplossen tijdens homogeniseren van aluminium-legeringen

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1995, In : Materialen. 1, p. 25-28 4 p.

    Research output: Contribution to journalArticleScientific

  5. Flow stress prediction during intercritical deformation of a low-carbon steel with a rule of mixtures and Fe-simulations.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Scripta Metallurgica. 45, p. 875-882 8 p.

    Research output: Contribution to journalArticleScientific

  6. Microstructuur en kinetiek tijdens het partieel gloeien van twee commerciële niet-hardbare aluminiumlegeringen

    Sontgerath, JAH., van Mourik, P., van der Zwaag, S. & Korevaar, BM., 1996, In : Materialen. 1, p. 21-27 7 p.

    Research output: Contribution to journalArticleScientific

  7. Review on some Stefan Problems for Particle Dissolution in Solid Metallic Alloys

    Vermolen, FJ., Vuik, C., Javierre Perez, E. & van der Zwaag, S., 2005, In : Nonlinear Analysis: modelling and control (online). 10, 3, p. 257-292 36 p.

    Research output: Contribution to journalArticleScientific

  8. The application of reversed torsion deformation to the study of the austenite to ferrite phase transformation in steels

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : Scripta Materialia. 46, p. 413-417 5 p.

    Research output: Contribution to journalArticleScientific

  9. The dependence of the B-AlFeSi to x-Al(FeMn)Si transformation kinetics in Al-Mg-Si alloys on the alloying elements

    Kuijpers, NCW., Vermolen, FJ., Vuik, C., Koenis, PTG., Nilsen, KE. & van der Zwaag, S., 2005, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 395, p. 9-19 11 p.

    Research output: Contribution to journalArticleScientific

  10. The gamma-alpha transformation kinetics of low carbon steels under ultra-fast cooling condition.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientific

  11. Article › Scientific › Peer-reviewed
  12. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. 3DXRD microscopy for the study of solid-state phase transformation kinetics.

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. A 2D analysis of the competition between the equiaxed ferritic and the bainitic morphology based on a Gibbs energy balance approach

    Yang, Z., Xu, W., Yang, Z., Zhang, C. & van der Zwaag, S., 2016, In : Acta Materialia. 105, February, p. 317-327 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. A New Approach Toward Metal-Free Self-Healing Ionomers Based on Phosphate and Methacrylate Containing Copolymers

    Dahlke, J., Bose, R. K., Zechel, S., Garcia, S. J., van der Zwaag, S., Hager, M. D. & Schubert, U. S., 1 Dec 2017, In : Macromolecular Chemistry and Physics. 218, 23, 9 p., 1700340.

    Research output: Contribution to journalArticleScientificpeer-review

  17. A Novel Approach for Controlling the Band Formation in Medium Mn Steels

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 6, p. 1998–2010 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. A Statistical Mechanics Theory of Grain Deformation and its Prediction of Dynamical Recovery and Recrystallization

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 87-92 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. A cohesive-zone crack healing model for self-healing materials

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2018, In : International Journal of Solids and Structures. 134, p. 249-263

    Research output: Contribution to journalArticleScientificpeer-review

  20. A combined EIS and x-ray computed tomography study of the effect of a silyl ester on delamination and underfilm pit formation in a coated AA7050 sample

    Garcia Espallargas, SJ., Wu, X. & van der Zwaag, S., 2014, In : Corrosion Engineering, Science and Technology. 70, 5, p. 475-482 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. A combined electrochemical impedance spectroscopy and x-ray-computed tomography study of the effect of a silyl ester on delamination and underfilm pit formation in a coated AA7050 sample

    Garcia Espallargas, SJ., Wu, X. & van der Zwaag, S., 2014, In : Corrosion: journal of science and engineering. 70, 5, p. 475-482 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. A comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of AA1050

    Chen, SP. & van der Zwaag, S., 2004, In : Journal of Testing and Evaluation. 32, 4, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. A comparative study of the microstructure and mechanical properties of ¿ + ß titanium alloys

    Li, C., Chen, J., Wu, X. & van der Zwaag, S., 2014, In : Metal Science and Heat Treatment. 56, 7-8, p. 374-380 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. A comparison of numerical models for one-dimensional Stefan problems

    Javierre Perez, E., Vuik, C., Vermolen, FJ. & van der Zwaag, S., 2006, In : Journal of Computational and Applied Mathematics. 192, p. 445-459 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. A conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage

    Farle, AM., Kwakernaak, C., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 1, p. 37-45 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. A constructive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Mechanics of Materials. 41, 9, p. 982-988 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. A critical appraisal of fracture toughness measurements on AA6061 and an Al203-particle reinforced AA6061 alloy for various heat treatments

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. A critical appraisal of fracture toughness measurements on AA6061 and an Al2O3 particle reinforced AA6061 alloy for various heat treatments.

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. A critical appraisal of the potential of self healing polymeric coatings

    Garcia Espallargas, SJ., Fisher, H. & van der Zwaag, S., 2011, In : Progress in Organic Coatings. 72, 3, p. 211-221 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. A deconvolution protocol of the mechanical relaxation spectrum to identify and quantify individual polymer feature contributions to self-healing

    Montano, V., Picken, S. J., Van Der Zwaag, S. & Garcia, S. J., 2019, In : Physical Chemistry Chemical Physics. 21, 19, p. 10171-10184 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. A discussion on the atomic mechanism of the bainitic reaction in TRIP steels

    van der Zwaag, S. & Wang, J., 2002, In : Scripta Materialia. 47, p. 169-173 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. A filiform corrosion and potentiodynamic polarisation study of some aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, 7, p. 1629-1639 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe-C-M alloys

    Chen, H. & van der Zwaag, S., 2014, In : Acta Materialia. 72, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. A material genomic design of advanced high performance, noncorroding steels for ambient and high temperature applications

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Materials Science Forum. 783-786, p. 1201-1206 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. A mathematical analysis of physiological and morphological aspects of wound closure

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2009, In : Journal of Mathematical Biology. 59, p. 605-630 26 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. A mathematical approach to epidermal wound healing: Model Analysis and Computer Simulations

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2007, In : Reports of the Department of Applied Mathematical Analysis. 07, 14, p. 1-19 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. A mathematical model for the dissolution kinetics of Mg2Si-phases in Al-Mg-Si alloys during homogenisation under industrial conditions.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 254, p. 13-32 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. A mathematical model for the dissolution of stoichiometric particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 328, p. 14-25 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. A metal salt dependent self-healing response in supramolecular block copolymers

    Enke, M., Bose, R. K., Bode, S., Vitz, J., Schacher, F. H., Garcia Espallargas, S. J., Van Der Zwaag, S., Hager, M. D. & Schubert, U. S., 22 Nov 2016, In : Macromolecules. 49, 22, p. 8418-8429 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. A metallographic analysis of intercritically deformed C-Mn steel subjected to complex strain histories

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : ISIJ International. 42, 4

    Research output: Contribution to journalArticleScientificpeer-review

  43. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. A microchechanical study of the deformation behavior of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 2, p. 533-545 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. A micromechanical study of the deformation behaviour of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. A microstructural model for predicting hardness profiles of Fe-Cr alloys after nitriding.

    Braam, JJ. & van der Zwaag, S., 1999, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 79, 5, p. 1193-1206 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. A model of the beta-AlFeSi to alpha-Al(FeMn)Si transformation in Al-Mg-Si alloys

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Transactions. 44, 7, p. 1448-1456 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. A morphological study of filiform corrosive attack on cerated AA2024-T351 alluminium alloy

    Hughes, A. E., Mol, JMC., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, p. 107-124 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. A morphological study of filiform corrosive attack on chromated and alkaline-cleaned AA2024-T351 aluminium alloy

    Mol, JMC., Hughes, A. E., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 46, 5, p. 1201-1224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...16 Next

ID: 142717