1. Article › Scientific › Not peer-reviewed
  2. A physics-based transformation model for low-carbon steels: from first principles to on-line application

    van Leeuwen, Y., Luinenburg, A. W., Onink, M., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientific

  3. A three-dimensional model for particle dissolution in binary alloys.

    Vermolen, FJ., Javierre Perez, E., Vuik, C., Zhao, L. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 767-774 8 p.

    Research output: Contribution to journalArticleScientific

  4. Deeltjes oplossen tijdens homogeniseren van aluminium-legeringen

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1995, In : Materialen. 1, p. 25-28 4 p.

    Research output: Contribution to journalArticleScientific

  5. Flow stress prediction during intercritical deformation of a low-carbon steel with a rule of mixtures and Fe-simulations.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Scripta Metallurgica. 45, p. 875-882 8 p.

    Research output: Contribution to journalArticleScientific

  6. Microstructuur en kinetiek tijdens het partieel gloeien van twee commerciële niet-hardbare aluminiumlegeringen

    Sontgerath, JAH., van Mourik, P., van der Zwaag, S. & Korevaar, BM., 1996, In : Materialen. 1, p. 21-27 7 p.

    Research output: Contribution to journalArticleScientific

  7. Review on some Stefan Problems for Particle Dissolution in Solid Metallic Alloys

    Vermolen, FJ., Vuik, C., Javierre Perez, E. & van der Zwaag, S., 2005, In : Nonlinear Analysis: modelling and control (online). 10, 3, p. 257-292 36 p.

    Research output: Contribution to journalArticleScientific

  8. The application of reversed torsion deformation to the study of the austenite to ferrite phase transformation in steels

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : Scripta Materialia. 46, p. 413-417 5 p.

    Research output: Contribution to journalArticleScientific

  9. The dependence of the B-AlFeSi to x-Al(FeMn)Si transformation kinetics in Al-Mg-Si alloys on the alloying elements

    Kuijpers, NCW., Vermolen, FJ., Vuik, C., Koenis, PTG., Nilsen, KE. & van der Zwaag, S., 2005, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 395, p. 9-19 11 p.

    Research output: Contribution to journalArticleScientific

  10. The gamma-alpha transformation kinetics of low carbon steels under ultra-fast cooling condition.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientific

  11. Article › Scientific › Peer-reviewed
  12. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. 3DXRD microscopy for the study of solid-state phase transformation kinetics.

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. A 2D analysis of the competition between the equiaxed ferritic and the bainitic morphology based on a Gibbs energy balance approach

    Yang, Z., Xu, W., Yang, Z., Zhang, C. & van der Zwaag, S., 2016, In : Acta Materialia. 105, February, p. 317-327 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. A New Approach Toward Metal-Free Self-Healing Ionomers Based on Phosphate and Methacrylate Containing Copolymers

    Dahlke, J., Bose, R. K., Zechel, S., Garcia, S. J., van der Zwaag, S., Hager, M. D. & Schubert, U. S., 1 Dec 2017, In : Macromolecular Chemistry and Physics. 218, 23, 9 p., 1700340.

    Research output: Contribution to journalArticleScientificpeer-review

  17. A Novel Approach for Controlling the Band Formation in Medium Mn Steels

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 6, p. 1998–2010 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. A Statistical Mechanics Theory of Grain Deformation and its Prediction of Dynamical Recovery and Recrystallization

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 87-92 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. A cohesive-zone crack healing model for self-healing materials

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2018, In : International Journal of Solids and Structures. 134, p. 249-263

    Research output: Contribution to journalArticleScientificpeer-review

  20. A combined EIS and x-ray computed tomography study of the effect of a silyl ester on delamination and underfilm pit formation in a coated AA7050 sample

    Garcia Espallargas, SJ., Wu, X. & van der Zwaag, S., 2014, In : Corrosion Engineering, Science and Technology. 70, 5, p. 475-482 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. A combined electrochemical impedance spectroscopy and x-ray-computed tomography study of the effect of a silyl ester on delamination and underfilm pit formation in a coated AA7050 sample

    Garcia Espallargas, SJ., Wu, X. & van der Zwaag, S., 2014, In : Corrosion: journal of science and engineering. 70, 5, p. 475-482 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. A combined fracture mechanical – rheological study to separate the contributions of hydrogen bonds and disulphide linkages to the healing of poly(urea-urethane) networks

    Grande, A. M., Bijleveld, J. C., Garcia, S. J. & Van Der Zwaag, S., 25 Jul 2016, In : Polymer. 96, p. 26-34 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. A comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of AA1050

    Chen, SP. & van der Zwaag, S., 2004, In : Journal of Testing and Evaluation. 32, 4, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. A comparative study of the microstructure and mechanical properties of ¿ + ß titanium alloys

    Li, C., Chen, J., Wu, X. & van der Zwaag, S., 2014, In : Metal Science and Heat Treatment. 56, 7-8, p. 374-380 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. A comparison of numerical models for one-dimensional Stefan problems

    Javierre Perez, E., Vuik, C., Vermolen, FJ. & van der Zwaag, S., 2006, In : Journal of Computational and Applied Mathematics. 192, p. 445-459 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. A conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage

    Farle, AM., Kwakernaak, C., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 1, p. 37-45 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. A constructive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Mechanics of Materials. 41, 9, p. 982-988 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. A critical appraisal of fracture toughness measurements on AA6061 and an Al203-particle reinforced AA6061 alloy for various heat treatments

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. A critical appraisal of fracture toughness measurements on AA6061 and an Al2O3 particle reinforced AA6061 alloy for various heat treatments.

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. A critical appraisal of the potential of self healing polymeric coatings

    Garcia Espallargas, SJ., Fisher, H. & van der Zwaag, S., 2011, In : Progress in Organic Coatings. 72, 3, p. 211-221 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. A deconvolution protocol of the mechanical relaxation spectrum to identify and quantify individual polymer feature contributions to self-healing

    Montano, V., Picken, S. J., Van Der Zwaag, S. & Garcia, S. J., 2019, In : Physical Chemistry Chemical Physics. 21, 19, p. 10171-10184 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. A discussion on the atomic mechanism of the bainitic reaction in TRIP steels

    van der Zwaag, S. & Wang, J., 2002, In : Scripta Materialia. 47, p. 169-173 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. A filiform corrosion and potentiodynamic polarisation study of some aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, 7, p. 1629-1639 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe-C-M alloys

    Chen, H. & van der Zwaag, S., 2014, In : Acta Materialia. 72, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. A material genomic design of advanced high performance, noncorroding steels for ambient and high temperature applications

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Materials Science Forum. 783-786, p. 1201-1206 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. A mathematical analysis of physiological and morphological aspects of wound closure

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2009, In : Journal of Mathematical Biology. 59, p. 605-630 26 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. A mathematical approach to epidermal wound healing: Model Analysis and Computer Simulations

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2007, In : Reports of the Department of Applied Mathematical Analysis. 07, 14, p. 1-19 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. A mathematical model for the dissolution kinetics of Mg2Si-phases in Al-Mg-Si alloys during homogenisation under industrial conditions.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 254, p. 13-32 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. A mathematical model for the dissolution of stoichiometric particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 328, p. 14-25 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. A metal salt dependent self-healing response in supramolecular block copolymers

    Enke, M., Bose, R. K., Bode, S., Vitz, J., Schacher, F. H., Garcia Espallargas, S. J., Van Der Zwaag, S., Hager, M. D. & Schubert, U. S., 22 Nov 2016, In : Macromolecules. 49, 22, p. 8418-8429 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. A metallographic analysis of intercritically deformed C-Mn steel subjected to complex strain histories

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : ISIJ International. 42, 4

    Research output: Contribution to journalArticleScientificpeer-review

  44. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. A microchechanical study of the deformation behavior of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 2, p. 533-545 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. A micromechanical study of the deformation behaviour of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. A microstructural model for predicting hardness profiles of Fe-Cr alloys after nitriding.

    Braam, JJ. & van der Zwaag, S., 1999, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 79, 5, p. 1193-1206 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. A model of the beta-AlFeSi to alpha-Al(FeMn)Si transformation in Al-Mg-Si alloys

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Transactions. 44, 7, p. 1448-1456 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. A morphological study of filiform corrosive attack on cerated AA2024-T351 alluminium alloy

    Hughes, A. E., Mol, JMC., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, p. 107-124 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. A morphological study of filiform corrosive attack on chromated and alkaline-cleaned AA2024-T351 aluminium alloy

    Mol, JMC., Hughes, A. E., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 46, 5, p. 1201-1224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. A nano-indentation study on the mechanical behaviour of the matrix material in an AA6061-Al2O3 MMC.

    Mussert, KM., Vellinga, WP., Bakker, A. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 789-794 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. A new etching route for reveailing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

    San Martin, D., Rivera Diaz del Castillo, PEJ., Peekstok, ER. & van der Zwaag, S., 2007, In : Materials Characterization. 58, p. 455-460 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Yan, W., Yang, K., San Martin, D., van der Zwaag, S. & Kestens, LAI., 2010, In : Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. A novel 2D analysis method to study individual grains using high-energy X-ray microbeam diffraction

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2007, In : Advances in X-Ray Analysis. 51, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels

    Xu, X., van der Zwaag, S. & Xu, W., 2015, In : Wear. 322-323, January, p. 51-60 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 9, p. 2789-2797 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. A numerical study into the effect of elongated capsules on the healing efficiency of liquid-based systems

    Mookhoek, SD., Fisher, H. & van der Zwaag, S., 2009, In : Computational Materials Science. 47, p. 506-511 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 595-602 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. A rheological and spectroscopic study on the kinetics of self-healing in a single component diels-alder copolymer and its underlying chemical reaction

    Bose, RK., Kotteritzsch, J., Garcia Espallargas, SJ., Hager, MD., Schubert, US. & van der Zwaag, S., 2014, In : Journal of Polymer Science. Part A, Polymer Chemistry. 52, 12, p. 1669-1675 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. A single grain approach applied to the modeling of recrystallization kinetics for cold rolled single-phase metals

    Chen, SP. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35(A), 3, p. 741-749 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. A statistical evaluation of the staircase and the ArcSin SQRT(P) method for determining the fatigue limit.

    Braam, JJ. & van der Zwaag, S., 1998, In : Journal of Testing and Evaluation. 26, 2, p. 125-131 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. A strain based computational design of austenitic creep resistant steel with an improved precipitation hardening

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Acta Materialia. 64, p. 133-143 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. A strain-based computational design of creep-resistant steels

    Lu, Q., Xu, W. & van der Zwaag, S., 2013, In : Acta Materialia. 64, feb 2014, p. 133-143 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys.

    Wits, JJ., Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 283, p. 234-241 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. A study on the beta' and beta" formation kinetics in AA6063 using differential scanning calorimetry

    van de Langkruis, J., Vossenberg, MS., Kool, WH. & van der Zwaag, S., 2003, In : Journal of Materials Engineering and Performance. vol. 12, No. 4, p. 408-413 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. A study on the fracture toughness of Al-based MMCs containing different volume fractions Al2O3.

    Duwel, AHC., Mussert, KM., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Materials Science Letters. 20, p. 1147-1150 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

    Risanti, DD., Yin, M., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 523, 1-2, p. 99-111 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. A temperature oscillation instrument to determine pyroelectric properties of materials at low frequencies: Towards elimination of lock-in methods

    Khanbareh, H., Schelen, JBJ., van der Zwaag, S. & Groen, WA., 2015, In : Review of Scientific Instruments. 86, 10, p. 105111-1-105111-5

    Research output: Contribution to journalArticleScientificpeer-review

  71. A three-dimensional model for the development of the microstructure in steel during slow cooling

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 2000, 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. A three-dimensional model for the development of the microstructure in steel during slow cooling.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. A translation of the structure of mussel byssal threads into synthetic materials by the utilization of histidine-rich block copolymers

    Enke, M., Bose, R. K., Zechel, S., Vitz, J., Deubler, R., Garcia, S. J., Van Der Zwaag, S., Schacher, F. H., Hager, M. D. & Schubert, U. S., 7 Jul 2018, In : Polymer Chemistry. 9, 25, p. 3543-3551 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Ab-initio modeling of metastable precipitation processes in aluminum 7xxx alloys

    de Jong, M., van der Zwaag, S. & Sluiter, MHF., 2012, In : International Journal of Materials Research. 103, 8, p. 972-979 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Abrasion resistance characterization of low alloy construction steels: A comparison between three different scratch test protocols

    Xu, X., van der Zwaag, S. & Xu, W., 15 Aug 2017, In : Wear. 384-385, p. 106-113 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Acomparative study of the microstructure and mechanical properties of ¿+ß titanium alloys

    Li, C., Chen, H., Wu, X. & van der Zwaag, S., 2013, In : Metal Science and Heat Treatment.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Acylhydrazones as reversible covalent crosslinkers for self-healing polymers

    Kuhl, N., Bode, S., Bose, RK., Vitz, J., Seifert, A., Hoeppener, S., Garcia Espallargas, SJ., Spange, S., van der Zwaag, S., Hager, MD. & Schubert, US., 2015, In : Advanced Functional Materials. 25, 22, p. 3295-3301 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Adhesion and long-term barrier restoration of intrinsic self-healing hybrid sol-gel coatings

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, In : ACS Applied Materials and Interfaces. 8, 6, p. 4126-4136 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Alginate fibres containing discrete liquid filled vacuoles for controlled delivery of healing agents in fibre reinforced composites

    Mookhoek, SD., Fischer, H. & van der Zwaag, S., 2012, In : Composites Part A: Applied Science and Manufacturing. 43, 12, p. 2176-2182 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. An Overview of the Cyclic Partial Austenite-Ferrite Transformation Concept and Its Potential

    Chen, H. & van der Zwaag, S., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 6, p. 2720–2729 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. An analytical approach to model heterogonous recrystallization kinetics taking into account the natural spatial inhomogeneity of deformation

    Luo, H. & van der Zwaag, S., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 1, p. 231-238 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. An in-situ LSCM study on bainite Formation in a Fe-0.2C-1.5Mn-2.0Cr Alloy

    Sainis, S., Farahani, H., Gamsjäger, E. & van der Zwaag, S., 2018, In : Metals. 8, 7, 22 p., 498.

    Research output: Contribution to journalArticleScientificpeer-review

  83. An integrated study on the effect of pre- and post-extrusion heat treatments and surface treatment on the filiform corrosion properties of an aluminium extrusion alloy

    Mol, JMC., van de Langkruis, J., de Wit, JHW. & van der Zwaag, S., 2005, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, 11, p. 2711-2730 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Analysis and experimental validation of the figure of merit for piezoelectric energy harvesters

    Deutz, D. B., Pascoe, J. A., Schelen, B., Van Der Zwaag, S., De Leeuw, D. M. & Groen, P., 1 May 2018, In : Materials Horizons. 5, 3, p. 444-453 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Analysis of ferrite growth retardation induced by local Mn enrichment in austenite created by prior interface passage

    Chen, H. & van der Zwaag, S., 2013, In : Acta Materialia. 61, 4, p. 1338-1349 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling.

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 1431-1440 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  87. Analysis of the fractal dimension of grain boundaries of AA7050 aluminum alloys and its relationship to fracture toughness

    Khanbareh, H., Wu, X. & van der Zwaag, S., 2012, In : Journal of Materials Science. 47, 17, p. 6246-6253 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Analysis of the grain size evolution for ferrite formation in Fe-C-Mn steels using a 3D model under a mixed-mode interface condition

    Fang, H., Mecozzi, M. G., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 1, p. 41-53

    Research output: Contribution to journalArticleScientificpeer-review

  89. Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy

    Dong, H., Chen, H., Wang, W., Zhang, Y., Miyamoto, G., Furuhara, T., Zhang, C., Yang, Z. & van der Zwaag, S., 1 Oct 2018, In : Acta Materialia. 158, p. 167-179 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Analysis of the mobility of migrating austenite-ferrite interfaces

    Gamsjager, E., Wiessner, M., Schider, S., Chen, H. & van der Zwaag, S., 2015, In : Philosophical Magazine (London, 2003). 95, 26, p. 2899-2917 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Analysis of the stagnant stage in diffusional phase transformations starting from austenite¿ferrite mixtures

    Chen, H., Goune, M. & van der Zwaag, S., 2012, In : Computational Materials Science. 55, p. 34-43 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Analysis of the state of poling of lead zirconate titanate (PZT) particles in a Zn-ionomer composite

    James, NK., Comyn, T., Hall, D., Daniel, L., Kleppe, A., van der Zwaag, S. & Groen, WA., 2016, In : Ferroelectrics. 493, 1, p. 139-150 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Analysis of the structure and resulting mechanical properties of aluminium extrusions containing a charge weld interface

    den Bakker, AJ., Katgerman, L. & van der Zwaag, S., 2016, In : Journal of Materials Processing Technology. 229, March, p. 9-21 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Analysis of the y - a transformation in a C-Mn steel by phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2005, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 36A, (9), p. 2327-2340 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Analysis of transformation stasis during the isothermal bainitic ferrite formation in Fe-C-Mn and Fe-C-Mn-Si alloys.

    Chen, H., Zhu, K., Zhao, L. & van der Zwaag, S., 2013, In : Acta Materialia. 61, p. 5458-5468 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Analytical approach to particle dissolution in a finite medium

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1997, In : Materials Science and Technology. 13, p. 308-312 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Anisotropic dilatation behaviour during transformation of hot rolled steels showing banded structure.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Technology. 17, 12, p. 1569-1574 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Application of cyclic partial phase transformations for identifying kinetic transitions during solid-state phase transformations: Experiments and modeling

    Chen, H., Appolaire, B. & van der Zwaag, S., 2011, In : Acta Materialia. 59, 17, p. 6751-6760 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Application of interrupted cooling experiments to study the mechanism of bainitic ferrite formation in steels

    Chen, H., Borgenstam, A., Odqvist, J., Zuazo, I., Goune, M., Agren, J. & van der Zwaag, S., 2013, In : Acta Materialia. 61, 12, p. 4512-4523 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Application of the cyclic phase tranformation concept for investigating growth kinetics of solid-state partitioning phase transformations

    Chen, H. & van der Zwaag, S., 2010, In : Computational Materials Science. 49, p. 801-813 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

    Gamsjager, E., Chen, H. & van der Zwaag, S., 2014, In : Computational Materials Science. 83, p. 92-100 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Application of the energy release rate approach for delamination growth in Glare

    Alderliesten, RC., Schijve, J. & van der Zwaag, S., 2005, In : Engineering Fracture Mechanics. p. 1-13 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  103. Applying SEM-Based X-ray microtomography to observe self-healing in solvent encapsulated thermoplastic materials

    Mookhoek, SD., Mayo, SC., Hughes, A. E., Furman, SA., Fischer, H. & van der Zwaag, S., 2010, In : Advanced Engineering Materials. 12, 3, p. 228-234 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  104. Aspect ratio of bainite in steels.

    Wang, J., van der Zwaag, S., Yang, Z. & Fang, HS., 2000, In : Materials Letters. 45, p. 228-234 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  105. Assessment of constitutive equations in modelling the hot deformability of some overaged AlMgSi alloys with varying solute contents.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A266, p. 135-145 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  106. Assessment of different techniques for quantification of alpha-Al(FeMn) and beta-AlFeSi intermetallics in AA 6xxx alloys.

    Kuijpers, NCW., Kool, WH., Koenis, PTG., Nilsen, K. E., Todd, I. & van der Zwaag, S., 2003, In : Materials Characterization. 49, p. 409-420 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  107. Assessment of healed scratches in intrinsic healing coatings by AC/DC/AC accelerated electrochemical procedure

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, In : Surface and Coatings Technology. p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  108. Assuring Microstructural Homogenity in Dual Phase and Trip Steels

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Steel Research International. 75, p. 711-715 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  109. Autonomous damage initiated healing in a thermo-responsive ionomer

    Varley, R. J. & van der Zwaag, S., 2010, In : Polymer International. 59, 8, p. 1031-1038 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  110. Autonomous filling of creep cavities in Fe-Au alloys studied by synchrotron X-ray nano-tomography

    Fang, H., Versteylen, C. D., Zhang, S., Yang, Y., Cloetens, P., Ngan-Tillard, D., Brück, E., van der Zwaag, S. & van Dijk, N. H., 1 Dec 2016, In : Acta Materialia. 121, p. 352-364 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  111. Autonomous filling of grain-boundary cavities during creep loading in Fe-Mo alloys

    Zhang, S., Fang, H., Gramsma, M. E., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Brück, E., van der Zwaag, S., van Dijk, N. H. & More Authors, 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 10, p. 4831-4844

    Research output: Contribution to journalArticleScientificpeer-review

  112. Autonomous high-temperature healing of surface cracks in Al2O3 containing Ti2AlC particles

    Boatemaa, L., Bosch, M., Farle, A. S., Bei, G. P., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the American Ceramic Society. 101, 12, p. 5684-5693

    Research output: Contribution to journalArticleScientificpeer-review

  113. Autonomous repair mechanism of creep damage in Fe-Au and Fe-Au-B-N alloys

    Zhang, S., Kwakernaak, C., Tichelaar, FD., Sloof, WG., Kuzmina, M., Herbig, M., Raabe, D., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 12, p. 5656-5670 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  114. Bainite transformation of low carbon Mn-Si TRIP-assisted multiphase steels: influence of silicon content on cementite precipitation and ausenite retention.

    Jacques, P., Girault, E., Catlin, T., Geerlofs, N., Kop, TA., van der Zwaag, S. & Delannay, F., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 273-275, p. 475-479 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  115. Barrier free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel

    van Dijk, NH., Offerman, SE., Sietsma, J. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 4489-4498 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  116. Biderectional current-voltage converters based on magnetostrictive/piezoelectric composites

    Jia, Y., Or, SW., Chan, HL., Luo, H. & van der Zwaag, S., 2009, In : Japanese Journal of Applied Physics. Part 2, Letters & Express Lettres. 94, 263504, p. 1-3 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  117. Changes in Fe and Si solute levels during deformation of AA1200

    Lok, ZJ., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002, In : Materials Science Forum. 396-402, p. 457-462 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  118. Characteristics of the static recrystallisation kinetics of an intercritically deformed C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 293-298 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  119. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels.

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 6713-6723 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  120. Characterization of the adhesion of single-walled carbon nanotubes in poly (p-phenylene terephthalamide) composite fibres

    Deng, L., Young, RJ., van der Zwaag, S. & Picken, SJ., 2010, In : Polymer. 51, p. 2033-2039 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  121. Charting the 'composition-strength' space for novel austenitic, martensitic and ferritic creep resistant steels

    Lu, Q., van der Zwaag, S. & Xu, W., 2017, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 33, 12, p. 1577-1581 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  122. Charting the complete elastic properties of inorganic crystalline compounds

    de Jong, M., Chen, W., Angsten, T., Jain, A., Notestine, R., Gamst, A., Sluiter, MHF., Krishna Ande, C., van der Zwaag, S., Plata, JJ., Toher, C., Curtarolo, S., Ceder, G., Persson, KA. & Asta, M., 2015, In : Scientific Data. 2, p. 150009-1-150009-13

    Research output: Contribution to journalArticleScientificpeer-review

  123. Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels

    Ding, R., Liu, G., Wan, X., Ponge, D., Raabe, D., Godfrey, A., Furuhara, T., Yang, Z., van der Zwaag, S. & More Authors, 2020, In : Science Advances. 6, 13, 9 p., eaay1430.

    Research output: Contribution to journalArticleScientificpeer-review

  124. Cluster formation of pearlite colonies during the austenite/pearlite phase transformation in eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, In : Physica B: Condensed Matter. 335, p. 99-103 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  125. Cohesive-zone modelling of crack nucleation and propagation in particulate composites

    Ponnusami, SA., Turteltaub, SR. & van der Zwaag, S., 2015, In : Engineering Fracture Mechanics. 149, November, p. 170-190 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  126. Comparion of experimental AA60663 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model.

    van de Langkruis, J., Lof, J., Kool, WH., van der Zwaag, S. & Huétink, J., 2000, In : Computational Materials Science. 18, p. 381-392 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  127. Competitive Healing of Creep-Induced Damage in a Ternary Fe-3Au-4W Alloy

    Fu, Y., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2020, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  128. Computational design of UHS maraging stainless steel incorporating compositions as well as austenisation and ageing temperatures as optimisation parameters

    Xu, W., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Philosophical Magazine (London, 2003). 89, 20, p. 1647-1661 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  129. Computational design of precipitation strengthened austenitic heat-resistant steels

    Lu, Q., Xu, W. & van der Zwaag, S., 2013, In : Philosophical Magazine (London, 2003). 93, 25, p. 3391-3412 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  130. Computational investigation of porosity effects on fracture behavior of thermal barrier coatings

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 2019, In : Ceramics International. 45, 16, p. 20518-20527 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  131. Computational modeling of structure formation during dielectrophoresis in particulate composites

    Gutierrez, MA., Khanbareh, H. & van der Zwaag, S., 2016, In : Computational Materials Science. 112, February, p. 139-146 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  132. Connecting supramolecular bond lifetime and network mobility for scratch healing in poly(butyl acrylate) ionomers containing sodium, zinc and cobalt

    Bose, RK., Hohlbein, N., Garcia Espallargas, SJ., Schmidt, AM. & van der Zwaag, S., 2015, In : Physical Chemistry Chemical Physics. 17, 3, p. 1697-1704 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  133. Contribution to the understanding of austenite stability in a 12Cr-9Ni-4Mo maraging steel

    San Martin, D., van Dijk, NH., Yagodzinsky, Y., Brück, E. & van der Zwaag, S., 2005, In : Materials Science Forum. 500-501, p. 339-346 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  134. Contributions of hard and soft blocks in the self-healing of metal-ligand-containing block copolymers

    Bose, R. K., Enke, M., Grande, A. M., Zechel, S., Schacher, F. H., Hager, M. D., Garcia, S. J., Schubert, U. S. & van der Zwaag, S., 1 Aug 2017, In : European Polymer Journal. 93, p. 417-427 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  135. Controlling Healing and Toughness in Polyurethanes by Branch-Mediated Tube Dilation

    Montano, V., Wempe, M. M. B., Does, S. M. H., Bijleveld, J. C., Van Der Zwaag, S. & Garcia, S. J., 12 Nov 2019, In : Macromolecules. 52, 21, p. 8067-8078 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  136. Correlating the abrasion resistance of low alloy steels to the standard mechanical properties: A statistical analysis over a larger data set

    Xu, X., Ederveen, F. H., van der Zwaag, S. & Xu, W., 15 Dec 2016, In : Wear. 368-369, p. 92-100 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  137. Correlation between scratch healing and rheological behavior for terpyridine complex based metallopolymers

    Bode, S., Enke, M., Schacher, FH., Garcia Espallargas, SJ., van der Zwaag, S., Hager, MD. & Schubert, US., 2015, In : Journal of Materials Chemistry A. 3, 44, p. 22145-22153 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  138. Crack healing behaviour of Cr2AlC MAX phase studied by X-ray tomography

    Pei, R., McDonald, S. A., Shen, L., van der Zwaag, S., Sloof, W. G., Withers, P. J. & Mummery, P. M., 2017, In : Journal of the European Ceramic Society. 37, 2, p. 441-450

    Research output: Contribution to journalArticleScientificpeer-review

  139. Creating a protective shell for reactive MoSi2 particles in high-temperature ceramics

    Carabat, AL., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the American Ceramic Society. 98, 8, p. 2609-2616 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  140. Cross-diffusion controlled particle dissolution in metallic alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2005, In : Computing and Visualization in Science. 8, 1, p. 27-33 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  141. Damage evolution in a self-healing air plasma sprayed thermal barrier coating containing self-shielding MoSi 2 particles

    Chen, Y., Zhang, X., van der Zwaag, S., Sloof, W. G. & Xiao, P., 1 Aug 2019, In : Journal of the American Ceramic Society. 102, 8, p. 4899-4910

    Research output: Contribution to journalArticleScientificpeer-review

  142. Defect-induced Au precipitation in Fe-Au and Fe-Au-B-N alloys studied by in situ small-angle neutron scattering

    Zhang, S., Kohlbrecher, J., Tichelaar, FD., Langelaan, G., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2013, In : Acta Materialia. 61, p. 7009-7019 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  143. Demonstrating the self-healing behaviour of some selected ceramics under combustion chamber conditions

    Farle, A., Boatemaa, L., Shen, L., Gövert, S., Kok, J. B. W., Bosch, M., Yoshioka, S., Van Der Zwaag, S. & Sloof, W. G., 2016, In : Smart Materials and Structures. 25, 8, 10 p., 084019.

    Research output: Contribution to journalArticleScientificpeer-review

  144. Design of low hardness abrasion resistant steels

    Xu, X., Xu, W., Ederveen Hipgrave, F. & van der Zwaag, S., 2013, In : Wear. 301, 1-2, p. 89-93 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  145. Design of novel high strength Titanium alloys on the basis of intentional plasticity induced transformations

    van der Zwaag, S., Rivera Diaz del Castillo, PEJ. & Neelakantan, S., 2009, In : Cbm Metal Matters. 14, p. 18-19 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  146. Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Computational Materials Science. 44, p. 678-689 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  147. Designing new corrosion resistant ferritic heat resistant steel based on optimal solid solution strengthening and minimisation of undesirable microstructural components

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Computational Materials Science. 84, p. 198-205 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  148. Detailed In Situ Hot Stage Transmission Electron Microscope Observations of the Localized Pinning of a Mobile Ferrite-Austenite Interface in a Fe-C-Mn Alloy by a Single Oxidic Particle

    Nutter, J., Rainforth, W. M. & van der Zwaag, S., 1 Aug 2020, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 8, p. 3811-3818 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  149. Determination of fracture strength and fracture energy of (metallo-) ceramics by a wedge loading methodology and corresponding cohesive zone-based finite element analysis

    Farle, A. S., Krishnasamy, J., Turteltaub, S., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2018, In : Engineering Fracture Mechanics. 196, p. 56-70

    Research output: Contribution to journalArticleScientificpeer-review

  150. Determination of martensite start temperature in engineering steels. Part I. Empirical relations describing the effect of steel chemistry.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 761-768 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  151. Determination of martensite start temperature in engineering steels. Part II. Correlation between critical driving force and Ms temperature.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 769-776 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  152. Determination of mode switching in cyclic partial phase transformation in Fe-0.1C-xMn alloys as a function of the Mn concentration

    Farahani, H., Xu, W. & van der Zwaag, S., 2019, In : JOM. 71, 4, p. 1313 - 1321

    Research output: Contribution to journalArticleScientificpeer-review

  153. Determination of the intrinsic α/γ interface mobility during massive transformations in interstitial free Fe-X alloys

    Zhu, J., Luo, H., Yang, Z., Zhang, C., van der Zwaag, S. & Chen, H., 1 Jul 2017, In : Acta Materialia. 133, p. 258-268 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  154. Development of a quasi-static test method to investigate the origin of self-healing in ionomers under ballistic conditions

    Varley, R. J. & van der Zwaag, S., 2008, In : Polymer Testing. 27, 1, p. 11-19 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  155. Development of temperature stable charge based piezoelectric composite quasi-static pressure sensors

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2010, In : Sensors and Actuators A: Physical: an international journal devoted to research and development of physical and chemical transducers. 163, 1, p. 25-31 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  156. Dielectrophoretically structured piezoelectric composites with high aspect ratio piezoelectric particles inclusions

    van den Ende, DA., van Kempen, SE., Wu, X., Groen, WA., Randall, CA. & van der Zwaag, S., 2012, In : Journal of Applied Physics. 111, 12, p. 124107-1-124107-13

    Research output: Contribution to journalArticleScientificpeer-review

  157. Dilatometric analysis of phase transformations in hypo-eutectoid steels.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 36, p. 519-526 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  158. Direct TEM observation of α/γ interface migration during cyclic partial phase transformations at intercritical temperatures in an Fe-0.1C −0.5Mn alloy

    Nutter, J., Farahani, H., Rainforth, W. M. & van der Zwaag, S., 1 Oct 2019, In : Acta Materialia. 178, p. 68-78 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  159. Direct and indirect observation of multiple local healing events in successively loaded fibre reinforced polymer model composites using healing agent-filled compartmented fibres

    Prajer, M., Wu, X., Garcia Espallargas, SJ. & van der Zwaag, S., 2015, In : Composites Science and Technology. 106, p. 127-133 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  160. Direct strain energy harvesting in automobile tires using piezoelectric PZT-polymer composites

    van den Ende, DA., van de Wiel, HJ., Groen, WA. & van der Zwaag, S., 2012, In : Smart Materials and Structures. 21, 1, p. 015011-1-015011-11

    Research output: Contribution to journalArticleScientificpeer-review

  161. Dispersoid quantification and size distribution in hot and cold processed AA3103

    Anselmino, E., Miroux, AG. & van der Zwaag, S., 2004, In : Materials Characterization. 52, 4-5, p. 289-300 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  162. Dissolution of beta particles in an Al-Mg-Si alloy during DSC runs.

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  163. Dissolution of ß particles in an Al-Mg-Si alloy during DSC runs

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  164. Domain size determination of granular ferromagnetic systems with neutron depolarization

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. vol 89, no, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  165. Domain size determination of granular ferromagnetic systems with neutron depolarization.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. 89, 2, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  166. Early stages of oxidation of Ti3AlC2 ceramics

    Song, G., Pei, YT., Sloof, WG., Li, SB., Hosson, T. & van der Zwaag, S., 2008, In : Materials Chemistry and Physics. 112, p. 762-768 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  167. Effect of C and N and their absence on the kinetics of austenite-ferrite phase transformations in Fe-0.5Mn alloy

    Farahani, H., Zurob, H., Hutchinson, C. R. & van der Zwaag, S., 15 May 2018, In : Acta Materialia. 150, p. 224-235 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  168. Effect of Intercritical deformation on bainite formation in Al-containing TRIP steel

    Luo, H., Zhao, L., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, 8, p. 1219-1227 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  169. Effect of Strain Rate on the Subsequent Softening and Precipitation Kinetics in a Nb-Microalloyed Steel

    Luo, H., Qin, Y., Sietsma, J. & van der Zwaag, S., 2005, In : Steel Research International. 09, 76, p. 650-655 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  170. Effect of curing on the mechanical and healing behaviour of a hybrid dual network: A time resolved evaluation

    Abdolah Zadeh, M., Grande, A. M., Van Der Zwaag, S. & Garcia, S. J., 2016, In : RSC Advances. 6, 94, p. 91806-91814 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  171. Effect of dielectrophoretic structuring on piezoelectric and pyroelectric of lead titanate-expoxy composites

    Khanbareh, H., van der Zwaag, S. & Groen, WA., 2014, In : Smart Materials and Structures. 23, 10

    Research output: Contribution to journalArticleScientificpeer-review

  172. Effect of dielectrophoretic structuring on piezoelectric and pyroelectric properties of lead titanate-epoxy composites

    Khanbareh, H., van der Zwaag, S. & Groen, WA., 2014, In : Smart Materials and Structures. 23, 10

    Research output: Contribution to journalArticleScientificpeer-review

  173. Effect of free surface on the stability of individual retained austenite grains in a duplex stainless steel

    He, BB., Huang, M., Ngan, AHW. & van der Zwaag, S., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45a, 11, p. 4875-4881 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  174. Effect of graphene content on the restoration of mechanical, electrical and thermal functionalities of a self-healing natural rubber

    Hernandez Santana, M., Mar Bernal, M., Grande, A., Zhong, N., van der Zwaag, S. & Garcia, S. J., 2017, In : Smart Materials and Structures. 26, 8, 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  175. Effect of heat treatment on microstructure and properties with compression of metastable ß-titanium alloy

    Li, C., Chen, J., Wu, X. & van der Zwaag, S., 2014, In : Metal Science and Heat Treatment. 56, 5-6, p. 245-252 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  176. Effect of heat treatments on the microstructure variation and associated compression properties in ß metastable alloy

    Li, C., Chen, H., Wu, X. & van der Zwaag, S., 2014, In : Metal Science and Heat Treatment. 56, 5-6, p. 17-25 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  177. Effect of inhomogeneous deformation on the recrystallization kinetics of deformed metals

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 11, p. 1931-1936 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  178. Effect of low temperature aging on internal friction of AA2024

    Risanti, DD. & van der Zwaag, S., 2012, In : Advanced Materials Research. 463, p. 41-46 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  179. Effect of microsegregation and dislocations on the nucleation kinetics of precipitation in aluminium alloy

    Chen, SP., Kuijpers, NCW. & van der Zwaag, S., 2003, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A341, p. 296-306 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  180. Effect of particle contact on the electrical performance of NTC-epoxy composite thermistors

    Deutz, D. B., van der Zwaag, S. & Groen, P., 2020, In : Materials Research Express. 7, 2, 8 p., 025702.

    Research output: Contribution to journalArticleScientificpeer-review

  181. Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel−An in-situ X-ray diffraction study

    Wiessner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 13 Jan 2017, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 682, p. 117-125 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  182. Effect of strain rate on stress-induced martensitic formation and the compressive properties of Ti-V-(Cr,Fe)- Al

    Li, C., Chen, H., Wu, X. & van der Zwaag, S., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 573, p. 111-118 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  183. Effect of the Dianhydride/Branched Diamine Ratio on the Architecture and Room Temperature Healing Behavior of Polyetherimides

    Susa, A., Bose, R., Grande, A., van der Zwaag, S. & Garcia Espallargas, S., 10 Nov 2016, In : ACS Applied Materials and Interfaces. 8, 49, p. 34068−34079 12 p., 10433.

    Research output: Contribution to journalArticleScientificpeer-review

  184. Effect of the piezoelectric ceramic filler dielectric constant on the piezoelectric properties of PZT-epoxy composites

    Khaliq, J., Deutz, D. B., Frescas, J. A. C., Vollenberg, P., Hoeks, T., van der Zwaag, S. & Groen, P., 1 Feb 2017, In : Ceramics International. 43, 2, p. 2774-2779 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  185. Effect of the polymer structure on the viscoelastic and interfacial healing behaviour of poly(urea-urethane) networks containing aromatic disulphides

    Grande, A. M., Martin, R., Odriozola, I., van der Zwaag, S. & Garcia, S. J., 1 Dec 2017, In : European Polymer Journal. 97, p. 120-128 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  186. Effects of carbon concentration and cooling rate on continuous cooling transformations predicted by artificial neural network.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, In : Tetsu to Hagane. 39, 10, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  187. Effects of nitriding on fatigue strength of quenched and tempered steel: role of interstitial nitrogen.

    Korevaar, BM., Coorens, S., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 17, p. 54-62 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  188. Electrically conductive self-healing polymer composite coatings

    Bailey, BM., Leterrier, Y., Garcia Espallargas, SJ., van der Zwaag, S. & Michaud, V., 2015, In : Progress in Organic Coatings. 85, August, p. 189-198 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  189. Enhancing energy harvesting potential of (K,Na,Li)NbO3-epoxy composites via Li substitution

    Deutz, D. B., Mascarenhas, N. T., van der Zwaag, S. & Groen, W. A., 2016, In : Journal of the American Ceramic Society. 100, 3, p. 1108–1117 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  190. Erratum: Modeling and charcaterization of dielectrophoretically structured piezoelectric composites using piezoceramic particle inclusions with high aspect ratios

    van den Ende, DA., Maier, RA., Neer, PLMJ., van der Zwaag, S., Randall, CA. & Groen, WA., 2015, In : Journal of Applied Physics. 117, 9, p. 1-2 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  191. Evolution of the mixed-mode character of solid-state phase transformations in metals involving solute partitioning.

    Sietsma, J., Mecozzi, MG., van Bohemen, SMC. & van der Zwaag, S., 2006, In : Zeitschrift fuer Metallkunde. 97, 4, p. 356-361 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  192. Experimental characterization of the turbulent boundary layer over a porous trailing edge for noise abatement

    Rubio Carpio, A., Merino Martínez, R., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, In : Journal of Sound and Vibration. 443, p. 537-558 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  193. Experimental measurement of microchemistry evolution during processing of AA3103

    Miroux, AG., Lok, ZJ., Anselmino, E., Flemming, A. J. E., Bigot, A., Janot, E., Hagström, J., Liu, C., Dons, AL., Lötche, L. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, 6, p. 655-660 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  194. Experimental observations elucidating the mechanisms of structural bcc-hcp transformations in beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2006, In : Physical Review B (Condensed Matter and Materials Physics). 74, 13, p. 134114-1-13114-10

    Research output: Contribution to journalArticleScientificpeer-review

  195. Experimental observations on the correlation between microstructure and fracture of multiphase steels

    Papaefthymiou, S., Prahl, U., Bleck, W., van der Zwaag, S. & Sietsma, J., 2007, In : International Journal of Materials Research. 97, 12, p. 1723-1731 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  196. Exploring the piezoelectric performance of PZT particulate-epoxy composites loaded in shear

    Loock, F. V., Deutz, D. B., Zwaag, S. V. D. & Groen, W. A., 19 Jul 2016, In : Smart Materials and Structures. 25, 8, 085039.

    Research output: Contribution to journalArticleScientificpeer-review

  197. Fabrication and mechanical properties of electroconductive high temperature ZrC particle-reinforced Ti3AlC2 composites

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2008, In : Journal of Computational and Theoretical Nanoscience. 5, 8, p. 1725-1729 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  198. Ferrite formation during slow continuous cooling in steel.

    Offerman, SE., Stranglund, H., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Poulsen, HF., Agren, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 357-362 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  199. Ferrite growth from austenite in C-Mn steels during continuous cooling.

    Qui, C., Sietsma, J. & van der Zwaag, S., 1999, In : Ironmaking & Steelmaking: processes, products and applications. 26, 3, p. 200-204 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  200. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241-243, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  201. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization.

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  202. Ferrite/pearlite band formation in hot rolled medium carbon steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Technology. 18, p. 297-303 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  203. Ferrite/pearlite band prevention in dual phase and TRIP steels: Model development

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2005, In : ISIJ International. 45, 3, p. 380-387 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  204. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 2000, 48, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  205. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 48, 5, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  206. Filiform corrosion imaged beneath protection layers on Al Alloys

    Szymanski, R., Jamieson, DN., Hughes, T., Mol, JMC., van der Zwaag, S. & Ryan, CG., 2002, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 190, 1-4, p. 365-369 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  207. Filling of surface cracks in MAX phase ceramics using cathodic electrophoretic deposition

    Abdelkader, AM., Garcia Espallargas, SJ. & van der Zwaag, S., 2013, In : Ceramics International. 39, 3, p. 3429-3433 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  208. Filling of surface cracks in MAX phase ceramics using cathodic electrophoretic deposition

    Abdelkader, AM., Garcia Espallargas, SJ. & van der Zwaag, S., 2012, In : Ceramic Forum International: journal for the ceramic industries and ceramic research. 2013, p. 1-5 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  209. First-principles and genetic modelling of precipitation sequences in aluminium alloys

    de Jong, M., Dutta, RK., Sluiter, MHF., Miroux, AG., van der Zwaag, S., Sietsma, J. & Rivera Diaz del Castillo, PEJ., 2011, In : Solid State Phenomena. 172-174, p. 285-290 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  210. Flexible Lead-Free Piezoelectric Composite Materials for Energy Harvesting Applications

    Stuber, V. L., Deutz, D. B., Bennett, J., Cannel, D., de Leeuw, D. M., van der Zwaag, S. & Groen, P., 2019, In : Energy Technology. 7, 1, p. 177-185 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  211. Flexible Piezoelectric Touch Sensor by Alignment of Lead-Free Alkaline Niobate Microcubes in PDMS

    Deutz, D. B., Mascarenhas, N. T., Schelen, J. B. J., de Leeuw, D. M., van der Zwaag, S. & Groen, P., 2017, In : Advanced Functional Materials. 27, 24, 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  212. Genetic alloy design based on thermodynamics and kinetics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, 12, p. 1825-1833 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  213. Genetic alloy design of ultra high strength stainless steels: from thermodynamics to quantum mechanics

    Rivera Diaz del Castillo, PEJ., Xu, W. & van der Zwaag, S., 2010, In : Materials Science Forum. 638-642, Part 1-4, p. 3473-3478 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  214. Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by ni3ti intermetallic nanprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Wang, W., Bliznuk, V., Kestens, LAI. & van der Zwaag, S., 2010, In : Acta Materialia. 58, 10, p. 3582-3593 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  215. Grain nucleation and growth during phase transformations

    Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2002, In : Science. 298, p. 1003-1005 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  216. Healable dual organic-inorganic crosslinked sol-gel based polymers: crosslinking density and tetrasulfide content effect

    Abdolah Zadeh, M., Esteves, ACC., van der Zwaag, S. & Garcia Espallargas, SJ., 2014, In : Journal of Polymer Science. Part A, Polymer Chemistry. 52, p. 1953-1961 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  217. Healing of Early Stage Fatigue Damage in Ionomer/Fe3O4 Nanoparticle Composites

    Post, W., Bose, R., Garcia Espallargas, S. & van der Zwaag, S., 2016, In : Polymers. 8, 12, 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  218. Healing of a glass fibre reinforced composite with a disulphide containing organic-inorganic epoxy matrix

    Post, W., Cohades, A., Michaud, V., van der Zwaag, S. & Garcia, S. J., 10 Nov 2017, In : Composites Science and Technology. 152, p. 85-93 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  219. High Piezoelectric Voltage Coefficient in Structured Lead-Free (K,Na,Li)NbO3 Particulate—Epoxy Composites

    Kunnamkuzhakkal James, N., Deutz, D. B., Bose, R. K., van der Zwaag, S. & Groen, P., 2016, In : Journal of the American Ceramic Society. 99, 12, p. 3957-3963 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  220. High Temperature SANS Experiments on Nb(C,N) and MnS Precipitates in HSLA Steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S. & Heenan, RK., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, July 2002, p. 1883-1891 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  221. High temperature oxidation behaviour of Ti2AlC ceramic at 1200°C

    Song, G., Schnabel, V., Kwakernaak, C., van der Zwaag, S., Schneider, J. & Sloof, WG., 2012, In : Materials at High Temperatures: materials generation applications. 29, 3, p. 205-209 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  222. High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels.

    Blondé, R., Jimenez-Melero, E., Zhao, L., Wright, JP., Brück, E., van der Zwaag, S. & van Dijk, NH., 2012, In : Acta Materialia. 60, p. 565-577 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  223. High-resolution X-ray diffraction investigation on the evolution of the substructure of individual austenite grains in TRIP steels during tensile deformation

    Blonde, RJP., Jimenez-Melero, E., Huizenga, RM., Zhao, L., Wright, J., Bruck, EH., van der Zwaag, S. & van Dijk, NH., 2014, In : Journal of Applied Crystallography. 47, 3, p. 965-973 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  224. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  225. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2004, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  226. High-throughput design of low-activation, high-strength creep-resistant steels for nuclear-reactor applications

    Lu, Q., van der Zwaag, S. & Xu, W., 2016, In : Journal of Nuclear Materials. 469, February, p. 217-222 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  227. Highlights of designing with Hylite - a new material concept

    Burchitz, I., boesenkool, B., van der Zwaag, S. & Tassoul, M., 2004, In : Materials and Design. 26, 4, p. 271-279 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  228. Highly sensitive piezo particulate-polymer foam composites for robotic skin application

    Khanbareh, H., de Boom, K., van der Zwaag, S. & Groen, W. A., 27 Jul 2017, In : Ferroelectrics. 515, 1, p. 25-33 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  229. Identifying the Role of Primary and Secondary Interactions on the Mechanical Properties and Healing of Densely Branched Polyimides

    Susa, A., Mordvinkin, A., Saalwächter, K., Van Der Zwaag, S. & Garcia, S. J., 15 Oct 2018, In : Macromolecules. 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  230. Imaging the Molecular Motions of Autonomous Repair in a Self-Healing Polymer

    van der Kooij, H. M., Susa, A., García, S. J., van der Zwaag, S. & Sprakel, J., 2017, In : Advanced Materials. 29, 26, 6 p., 1701017.

    Research output: Contribution to journalArticleScientificpeer-review

  231. Improving the adhesion of thin stainless steel sheets for fibre metal laminates (FML) applications

    van Rooijen, RGJ., Sinke, J. & van der Zwaag, S., 2005, In : Journal of Adhesion Science and Technology. 19, p. 1387-1396 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  232. Improving the adhesion of thing stainless steel sheets for fibre metal laminate (FML) applications

    van Rooijen, RGJ., Sinke, J. & van der Zwaag, S., 2005, In : Journal of Adhesion Science and Technology. 19, 16, p. 1387-1396 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  233. Improving the d(33) and g(33) properties of 0-3 piezoelectric composites by dielectrophoresis

    van den Ende, DA., bory, BF., Groen, WA. & van der Zwaag, S., 2010, In : Journal of Applied Physics. 107, 2

    Research output: Contribution to journalArticleScientificpeer-review

  234. In Situ 3D Neutron Depolarization Study of the Transformation Kinetics and Grain Size Evolution During Cyclic Partial Austenite-Ferrite Phase Transformations in Fe-C-Mn Steels

    Fang, H., van der Zwaag, S. & van Dijk, N. H., 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  235. In situ determination of aging precipitation in deformed Fe-Cu and Fe-Cu-B-N alloys by time-resolved small-angle neutron scattering

    He, S., van Dijk, NH., Paladugu, MC., Schut, H., Kohlbrecher, J., Tichelaar, FD. & van der Zwaag, S., 2010, In : Physical Review B (Condensed Matter and Materials Physics). 82, 174111, p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  236. In situ high-temperature EBSD and 3D phase field studies of the austenite-ferrite transformation in a medium Mn steel

    Farahani, H., Zijlstra, G., Mecozzi, M. G., Ocelík, V., De Hosson, J. T. M. & Van Der Zwaag, S., 2019, In : Microscopy and Microanalysis. 25, 3, p. 639-655

    Research output: Contribution to journalArticleScientificpeer-review

  237. In situ observation of austenite-ferrite interface migration in a lean Mn steel during cyclic partial phase transformations

    Chen, H., Gamsjager, E., Schider, S., Khanbareh, H. & van der Zwaag, S., 2013, In : Acta Materialia. 61, 7, p. 2414-2424 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  238. In situ observations on the austenite stability in TRIP-steel during tensile testing

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Margulies, L., Lauridsen, EM., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002, In : Steel Research International. 73, 6+7, p. 236-241 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  239. In situ observations on the mechanical stability of austenite in TRIP steel

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003, In : The European Physical Journal. Special Topics. 104, p. 499-502 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  240. In situ synchrotron study on the interplay between martensite formation, texture evolution and load partitioning in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Wright, JP. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 6407-6416 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  241. In situ x-ray diffraction measurements of deformation-induced austenite to martensite transformation in a multiphase TRIP steel

    Zhao, L., van der Pers, NM., Sietsma, J. & van der Zwaag, S., 2005, In : Materials Science Forum. 500-501, p. 379-386 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  242. In-situ SEM observations of moving interfaces during recrystallisation

    van der Zwaag, S., Anselmino, E., Miroux, AG. & Prior, D. J., 2006, In : Materials Science Forum. 519-521, p. 1341-1348 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  243. In-situ high-temperature X-ray diffraction on the g to a transformation in low-carbon steels

    Bodin, A., Woning, L., Sietsma, J. & van der Zwaag, S., 2002, In : ISIJ International. 42, p. 94-99 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  244. In-situ observations of recrystallisation in AA3103 using FEG-SEM and EBSD.

    Anselmino, E., Miroux, AG., van der Zwaag, S., Seward, G. G. E., Seaton, N. C. A. & Prior, D. J., 2004, In : Materials Forum. 28, p. 811-817 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  245. In-situ poling and structurization of piezoelectric particulate composites

    Khanbareh, H., van der Zwaag, S. & Groen, P., 2017, In : Journal of Intelligent Material Systems and Structures. 28, 8, p. 2467-2472

    Research output: Contribution to journalArticleScientificpeer-review

  246. In-situ study of pearlite nucleation and growth during isothermal austenite decomposition in nearly eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 2003, In : Acta Materialia. 51, p. 3927-3938 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  247. Increasing the reliability of solid state lighting systems via self healing approaches: a review

    Lafont, UL., van Zeijl, HW. & van der Zwaag, S., 2012, In : Microelectronics Reliability. 52, 1, p. 71-89 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  248. Indirect evidence for the existence of the Mn partitioning spike during the austenite to ferrite transformation

    Chen, H. & van der Zwaag, S., 2012, In : Philosophical Magazine Letters: structure and properties of condensed matter. 92, 2, p. 86-92 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  249. Influence of alpha morphology and volume fraction on the stress-induced martensitic transformation in Ti-10V-2Fe-3Al

    Li, C., Wu, X., Chen, H. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, 18, p. 5854-5860 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  250. Influence of concurrent precipitation on the nucleation kinetics during recrystallisation in AA3003

    Chen, SP., Miroux, AG. & van der Zwaag, S., 2006, In : Materials Science Forum. 519-521, p. 1605-1610 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  251. Influence of cross-linkers on the cohesive and adhesive self-healing ability of polysulfide-based thermosets

    Lafont, UL., van Zeijl, HW. & van der Zwaag, S., 2012, In : ACS Applied Materials and Interfaces. 4, 11, p. 6280-6288 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  252. Influence of embedded MoSi2 particles on the high temperature thermal conductivity of SPS produced yttria-stabilised zirconia model thermal barrier coatings

    Kulczyk-Malecka, J., Zhang, X., Carr, J., Carabat, A. L., Sloof, W. G., van der Zwaag, S., Cernuschi, F., Nozahic, F., Monceau, D., Estournès, C., Withers, P. J. & Xiao, P., 2016, In : Surface and Coatings Technology. 308, p. 31-39

    Research output: Contribution to journalArticleScientificpeer-review

  253. Influence of intercritical deformation on microstructure of TRIP steels containing Al

    Papaefthymiou, S., Bleck, W., Kruijver, SO., Sietsma, J., Zhao, L. & van der Zwaag, S., 2004, In : Materials Science and Technology. 20, p. 201-206 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  254. Invited topical review: Liquid crystal main-chain polymers for high-performance fibre applications

    Picken, SJ., Sikkema, DJ., Boerstoel, H., Dingemans, TJ. & van der Zwaag, S., 2011, In : Liquid Crystals: an international journal in the field of anisotropic fluids. 38, p. 1591-1605 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  255. Irreversible thermodynamics modelling of plastic deformation of metals

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2008, In : Materials Science and Technology. 24, 4, p. 495-500 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  256. Isothermal martensitic transformation in a 12Cr-9Ni-4Mo-2Cu stainless steel in applied magnetic fields

    San Martin, D., Aarts, KWP., Rivera Diaz del Castillo, PEJ., van Dijk, NH., Brück, E. & van der Zwaag, S., 2008, In : Journal of Magnetism and Magnetic Materials. 320, p. 1722-1728 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  257. Kinetics of gamma to alpha phase transformation in Fe-Mn alloys containing low manganese.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Technology. 14, 1, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  258. Kinetics of zircon formation in yttria partially stabilized zirconia as a result of oxidation of embedded molybdenum disilicide

    Nozahic, F., Carabat, A. L., Mao, W., Monceau, D., Estournes, C., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2019, In : Acta Materialia. 174, p. 206-216

    Research output: Contribution to journalArticleScientificpeer-review

  259. Large area and flexible micro-porous piezoelectric materials for soft robotic skin

    Khanbareh, H., de Boom, K., Schelen, J. B. J., Scharff, R. B. N., Wang, C., van der Zwaag, S. & Groen, P., 15 Aug 2017, In : Sensors and Actuators A: Physical: an international journal devoted to research and development of physical and chemical transducers. 263, p. 554-562 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  260. Laser beam welding of an Oxide Dispersion Strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  261. Laser beam welding of an oxide dispersion strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 5286-5295 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  262. Laser-ultrasonic monitoring of austenite recrystallization in C-MN steel

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2006, In : ISIJ International. 46, 8, p. 1223-1232 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  263. Laser-ultrasonic monitoring of ferrite recovery in ultra-low carbon steel.

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 458, p. 391-401 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  264. Linking Surface Precipitation in Fe-Au Alloys to Its Self-healing Potential During Creep Loading

    Sun, W. W., Fang, H., van Dijk, N. H., van der Zwaag, S. & Hutchinson, C. R., 27 Feb 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 5, p. 2109–2114 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  265. Linking crack tip morphology to tear toughness of hot rolled AA7050 alloys using X-ray computed tomography

    Wu, X., Schlangen, E. & van der Zwaag, S., 2012, In : Advanced Engineering Materials. 14, 7, p. 449-456 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  266. Linking porosity to rolling reduction and fatigue lifetime of hot rolled AA7xxx by 3D x-ray computed tomography

    Wu, X., Schlangen, E. & van der Zwaag, S., 2012, In : Advanced Engineering Materials. 14, 7, p. 457-463 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  267. Liquid crystalline matrix polymres for aramid ballistic composites

    de Ruijter, C., van der Zwaag, S., stolze, R. & Dingemans, TJ., 2009, In : Polymer Composites. 31, 4, p. 612-619 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  268. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  269. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels.

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  270. Martensitic transformation of individual grains in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Scripta Materialia. 56, p. 421-424 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  271. Martensitic transformation of individual grains in multiphase metallic systems

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2006, In : Scripta Materialia.

    Research output: Contribution to journalArticleScientificpeer-review

  272. Mechanical properties of low temperature synthesized dense and fine-grained cr2alc ceramics

    Li, SB., Yu, WB., Zhai, HX., Song, G., Sloof, WG. & van der Zwaag, S., 2010, In : Journal of the European Ceramic Society. 31, 1-2, p. 217-224 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  273. Mechanical stability of individual austenite grains in TRIP steel studied by synchrotron X-ray diffraction during tensile loading.

    Blonde, RJP., Jimenez-Melero, E., Zhao, L., Wright, JP., Brück, E., van der Zwaag, S. & van Dijk, NH., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 618, p. 280-287 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  274. Mechanisms of broadband noise generation on metal foam edges

    Rubio Carpio, A., Avallone, F., Ragni, D., Snellen, M. & Van Der Zwaag, S., 1 Oct 2019, In : Physics of Fluids. 31, 10, 15 p., 105110.

    Research output: Contribution to journalArticleScientificpeer-review

  275. Mediation of high temperature radiation damage in bcc iron by Au or Cu precipitation

    Zhang, S., Yao, Z., Zhang, Z., Oleksandr, M., Chen, F., Cao, X., Zhang, P., van Dijk, N. & van der Zwaag, S., 15 Jan 2020, In : Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms. 463, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  276. Micro-scale Strain Distribution in Hot-worked Duplex Stainless Steel

    Hernandez castillo, L. E., Beynon, JH., Pinna, C. & van der Zwaag, S., 2005, In : Steel Research International. 76, 2/3, p. 137-141 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  277. Micromechanical damage simulations of TRIP steels

    Papaefthymiou, S., Bleck, W., Prahl, U., Acht, C., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1355-1360 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  278. Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters

    Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Computational Materials Science. 41, p. 107-116 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  279. Micromechanics-based modelling of properties and failure of multiphase steels.

    Prahl, U., Papaefthymiou, S., Uthaisangsuk, V., Bleck, W., Sietsma, J. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 17-22 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  280. Microstructural and X-ray tomographic analysis of damage in extruded aluminium weld seams

    den Bakker, AJ., Wu, X., Katgerman, L. & van der Zwaag, S., 2015, In : Materials Science and Technology. 31, 1, p. 94-104 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  281. Microstructural control of the austenite stability in low-alloyed trip steels

    Blonde, RJP., Jimenez, E., van Dijk, NH., Brueck, EH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2011, In : Solid State Phenomena. 172-174, p. 196-201 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  282. Microstructure and dislocation structure evolution during creep life of Ni-based single crystal superalloys

    Yu, H., Xu, W. & van der Zwaag, S., 15 May 2020, In : Journal of Materials Science and Technology. 45, p. 207-214 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  283. Modeling and charcaterization of dielectrophoretically structured piezoelectric composites using piezoceramic particle inclusions with high aspect ratios

    van den Ende, DA., Maier, RA., Neer, PLMJ., van der Zwaag, S., Randall, CA. & Groen, WA., 2013, In : Journal of Applied Physics. 113, 3, p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  284. Modeling of soft impingement effect during solid-state partitioning phase transformations in binary alloys

    Chen, H. & van der Zwaag, S., 2011, In : Journal of Materials Science. 46, 5, p. 1328-1336 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  285. Modeling recrystallization kinetics in AA1050 following simulated break-down rolling

    Chen, SP. & van der Zwaag, S., 2006, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 37A, p. 2859-2869 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  286. Modeling the kinetics of grain boundary nucleated recrystallisation processes after cold deformation

    Chen, SP., Todd, I. & van der Zwaag, S., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, p. 529-539 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  287. Modelling Chi-Phase Precipitation in High Molybdenum Stainless Steels

    Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Advanced Materials Research. 15-17, p. 531-536 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  288. Modelling Deformation Structures in Metals Based on an Entropic Analysis

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 571-576 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  289. Modelling Dynamic Recovery and Recrystallization of Metals by a New Non-Equilibrium Thermodynamics Approach

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 558, p. 517-522 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  290. Modelling Steady State Deformation of FCC Metals by Non-Equilibrium Thermodynamics

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Technology. 23, 9, p. 1105-1108 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  291. Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe-Cr-Ni-Mo stainless steel

    Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 467, 1-2, p. 24-32 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  292. Modelling dispersoid precipitation during recrystallisation in AA3103.

    Lok, ZJ., Miroux, AG. & van der Zwaag, S., 2006, In : Materials Science Forum. 519-521, p. 443-448 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  293. Modelling of the beta to alpha transformation in a metastable beta Ti alloy based on the kinetics and the morphology of the alpha plates.

    van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2007, In : International Journal of Materials Research. 98, 6, p. 476-484 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  294. Modelling of the effects of grain orientation on transformation-induced plasticity in multiphase carbon steels

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2006, In : Modelling and Simulation in Materials Science and Engineering. 14, p. 617-636 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  295. Modelling of the thermal expansion and compression of Mn.

    Qui, C. & van der Zwaag, S., 1998, In : Journal of Physics and Chemistry of Solids. 59, 2, p. 167-174 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  296. Modelling recovery an recrystallization kinetics after intercritical deformation in 0.19wt% C1.5wt% Mn steel

    Smith, A., Miroux, AG., Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 329-334 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  297. Modelling the Deformation of Ultra Fine Grained Metals Using Statistical Mechanics Concepts

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2005, In : Iron & Steel. 40, p. 60-65 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  298. Modelling the austenite to ferrite phase transformation in low carbon steels in terms of the interface mobility.

    Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : ISIJ International. 40, 7, p. 713-718 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  299. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part I: Phase regions.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1199-1207 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  300. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part II: Microstructure and hardness.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1208-1216 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  301. Modelling the fracture behaviour of thermal barrier coatings containing healing particles

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 5 Nov 2018, In : Materials and Design. 157, p. 75-86 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  302. Modelling the microstructural changes during the homogenisation of extrudable aluminium alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Journal of the Mechanical Behavior of Materials. 9, 2, p. 115-120 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  303. Modelling the steady state deformation stress under various deformation conditions using a single irreversible thermodynamics based formulation

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 12, p. 3431-3438 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  304. Modelling the strength of ultrafine-grained an nanocrystalline fcc metals

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2009, In : Scripta Materialia. 61, p. 1113-1116 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  305. Modelling the stress relaxation kinetics of intercritically deformed austenite and ferrite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 603-613 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  306. Modelling the strongest grain size in nanocrystalline FCC metals

    Huang, M., Bouaziz, O. & van der Zwaag, S., 2011, In : Materials Letters. 65, p. 3128-3130 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  307. Modification of a thermomechanical model to predict constitutive behavior of Al-Mg-Si alloys.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 2006, In : Journal of Materials Engineering and Performance. 15, 6, p. 632-639 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  308. Moisture induced crack filling in barrier coatings containing montmorillonite as an expandable phase

    Micciche, F., Fischer, H., Varley, R. J. & van der Zwaag, S., 2008, In : Surface and Coatings Technology. 202, p. 3346-3353 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  309. Monitoring Network and Interfacial Healing Processes by Broadband Dielectric Spectroscopy: A Case Study on Natural Rubber

    Hernandez Santana, M., Grande, A., van der Zwaag, S. & Garcia Espallargas, S., 2016, In : ACS Applied Materials and Interfaces. p. 10647-10656

    Research output: Contribution to journalArticleScientificpeer-review

  310. Monitoring the precipitation reactions in a cold-rolled Al-Mn-Mg-Cu alloy using thermoelectric power and electrical resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2001, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 81, 8, p. 2059-2072 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  311. Multi length scale characterization of austenite in TRIP steels using high-energy X-ray diffraction.

    Blonde, RJP., Jimenez-Melero, E., Zhao, L., Wright, JP., Brück, E., van der Zwaag, S. & van Dijk, NH., 2013, In : Powder Diffraction: an international journal of materials characterization. 28, 2, p. 77-80 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  312. Multiple crack healing of a Ti2AlC ceramic

    Li, S., Song, G., Kwakernaak, C., van der Zwaag, S. & Sloof, WG., 2012, In : Journal of the European Ceramic Society. 32, 8, p. 1813-1820 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  313. Neutron depolarisation study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  314. Neutron depolarisation study of the austenite grain size in TRIP steels

    van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2004, In : Physica B: Condensed Matter. 350, p. e463-e466

    Research output: Contribution to journalArticleScientificpeer-review

  315. Neutron depolarization study of phase transformations in steel.

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  316. Neutron depolarization study of the austenite/pearlite phase transformation in steel

    van Wilderen, LJGW., Offerman, SE., van Dijk, NH. & van der Zwaag, S., 2002, In : Applied Physics A: materials science & processing. 74, Part 2 sup, p. s1052-s1054

    Research output: Contribution to journalArticleScientificpeer-review

  317. Neutron depolarization study on the autenite/pearlite phase transformation in steel

    van Wilderen, LJGW., Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S1052-S1054

    Research output: Contribution to journalArticleScientificpeer-review

  318. Non-destructive monitoring of delamination healing of a CFRP composite with a thermoplastic ionomer interlayer

    Post, W., Kersemans, M., Solodov, I., Van Den Abeele, K., García, S. J. & van der Zwaag, S., 1 Oct 2017, In : Composites Part A: Applied Science and Manufacturing. 101, p. 243-253 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  319. Numerical Investigation into the Effect of Splats and Pores on the Thermal Fracture of Air Plasma-Sprayed Thermal Barrier Coatings

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 2019, In : Journal of Thermal Spray Technology. 28, 8, p. 1881-1892 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  320. Numerical study of the scratch-closing behavior of coatings containing an expansive layer

    Rey, R., Javierre, E., Garcia Espallargas, SJ., van der Zwaag, S. & Garcia-Aznar, JM., 2012, In : Surface and Coatings Technology. 206, 8-9, p. 2220-2225 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  321. On measurement of retained austenite in multiphase TRIP steels - results of blind round robin test involving six different techniques.

    Jacques, PJ., Allain, S., Bouaziz, O., De, A., Gourgues, A-F., Hance, BM., Houbaert, Y., Huang, J., Iza-Mendia, A., Kruger, S. E., Radu, M., Samek, L., Speer, J., Zhao, L. & van der Zwaag, S., 2009, In : Materials Science and Technology. 25, 5, p. 567-574 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  322. On the 650 °C thermostability of 9–12Cr heat resistant steels containing different precipitates

    Wang, H., Yan, W., van der Zwaag, S., Shi, Q., Wang, W., Yang, K. & Shan, Y., 1 Aug 2017, In : Acta Materialia. 134, p. 143-154 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  323. On the Cobalt: Tungsten/Chromium balance in martensitic creep resistant steels

    Yu, H., Xu, W. & van der Zwaag, S., 2017, In : Steel Research International. 89, 2, 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  324. On the Relationship between the Chromium Concentration, the Z-Phase Formation and the Creep Strength of Ferritic-Martensitic Steels

    Yu, H., Xu, W. & van der Zwaag, S., 1 Oct 2018, In : Steel Research International. 89, 10, 8 p., 1800177.

    Research output: Contribution to journalArticleScientificpeer-review

  325. On the bond strength of aluminium foams bonded to solid aluminium

    Nieuwkoop, P., van der Zwaag, S. & Rizam Majid, M. S., 2004, In : SAMPE Journal. p. 1-15 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  326. On the influence of alloying elements on the bainite reaction in low alloy steels during continuous cooling.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, p. 4393-4404 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  327. On the interfacial healing of a supramolecular elastomer

    Grande, AM., Garcia Espallargas, SJ. & van der Zwaag, S., 2015, In : Polymer. 56, January, p. 435-442 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  328. On the mobility of the austenite-ferrite interface in Fe-Co and Fe-Cuu.

    Vooijs, S., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 31, p. 379-385 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  329. On the nature of the bimodal grain size distribution after intercritical deformation of a carbon-manganese steel.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Characterization. 47, p. 1-7 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  330. On the nature of the growth of bainitic alpha plates in metastable beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 3684-3689 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  331. On the production and properties of novel particulate niti/AA2124 metal matrix composites

    San Martin, D., Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 250`-252

    Research output: Contribution to journalArticleScientificpeer-review

  332. On the production and properties of novel particulate nitip/aa2124 metal matrix composites

    San Martin, D., Risanti, DD., Garces, G., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 526, 1-2, p. 250-252 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  333. On the role of free carboxylic groups and cluster conformation on the surface scratch healing behaviour of ionomers

    Vega Vega, JM., Grande, AM., van der Zwaag, S. & Garcia Espallargas, SJ., 2014, In : European Polymer Journal. 57, p. 121-126 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  334. On the transformation behaviour of niti particulate reinforced aa2124 composites

    Thorat, RR., Risanti, DD., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Journal of Alloys and Compounds. 477, p. 307-315 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  335. On the transition between grain boundary ferrite and bainitic ferrite in Fe-C-Mo and Fe-C-Mn alloys: The bay formation explained

    Chen, H., Yang, Z., Zhang, C., Zhu, K. & van der Zwaag, S., 2016, In : Acta Materialia. 104, February, p. 62-71 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  336. On the use of B-alloyed MoSi2 particles as crack healing agents in yttria stabilized zirconia thermal barrier coatings

    Derelioglu, Z., Carabat, AL., Song, GM., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 16, p. 4507-4511 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  337. On the use of TiC as high-temperature healing particles in alumina based composites

    Yoshioka, S., Boatemaa, L., Zwaag, S. V. D., Nakao, W. & Sloof, W. G., 2016, In : Journal of the European Ceramic Society. 36, 16, p. 4155-4162

    Research output: Contribution to journalArticleScientificpeer-review

  338. On the use of non-MPB lead zirconium titanate (PZT) granules for piezoelectric ceramic–polymer sensorial composites

    Shaji Karapuzha, A., Kunnamkuzhakkal James, N., van der Zwaag, S. & Groen, W. A., 1 Sep 2016, In : Journal of Materials Science: Materials in Electronics. 27, 9, p. 9683-9689 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  339. Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels

    Goune, M., Danoix, F., Agren, J., Brechet, Y., Hutchinson, CR., Militzer, M., Purdy, G., van der Zwaag, S. & Zurob, H., 2015, In : Materials Science and Engineering R: Reports. 92, p. 1-38 38 p.

    Research output: Contribution to journalArticleScientificpeer-review

  340. Oxidation and crack healing behaviour of a fine-grained Cr2AlC ceramics

    Li, S., Xiao, L., Song, G., Wu, X., Sloof, WG. & van der Zwaag, S., 2013, In : Journal of the American Ceramic Society. 96, 3, p. 892-899 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  341. Oxidation and self-healing behaviour of spark plasma sintered Ta2AlC

    Farle, A. S. M., Stikkelman, J., van der Zwaag, S. & Sloof, W. G., 2017, In : Journal of the European Ceramic Society. 37, 5, p. 1969-1974

    Research output: Contribution to journalArticleScientificpeer-review

  342. Oxidation-induced crack healing in Ti3AlC2 ceramics

    Song, G., Pei, YT., Sloof, WG., Li, SB., Hosson, T. & van der Zwaag, S., 2007, In : Scripta Materialia. 58, p. 13-16 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  343. Parametric study of multiphase TRIP steels undergoing cyclic loading

    Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR. & van der Zwaag, S., 2011, In : Computational Materials Science. 50, 2011, p. 1490-1498 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  344. Particle dissolution and cross-diffusion in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A347, p. 265-279 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  345. Peripherally decorated binary microcapsules containing two liquids

    Mookhoek, SD., Blaiszik, B. J., Fischer, H., Sottos, N., WHITE, S. R. & van der Zwaag, S., 2008, In : Journal of Materials Chemistry. 18, p. 5390-5394 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  346. Phase field modelling of the interfacial condition at the moving interphase during the y - a transformation in C-Mn steels

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2005, In : Computational Materials Science. 34, 3, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  347. Phase transformations in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, Y., Kop, TA., Sietsma, J. & van der Zwaag, S., 1999, In : The European Physical Journal. Special Topics. 9, p. 401-409 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  348. Phase transformations in steel studied by 3DXRD-microscopy

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2006, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 246, p. 194-200 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  349. Physical Simulation of Thermally Induced Martensite Formation from Retained Austenite in TRIP steels

    Zhao, L., Vermolen, FJ., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 19, suppl 1, p. 105-108 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  350. Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel

    Shen, C., Wang, C., Wei, X., Li, Y., van der Zwaag, S. & Xu, W., 15 Oct 2019, In : Acta Materialia. 179, p. 201-214 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  351. Piezoelectric and mechanical properties of fatigue resistant, self-healing PZT-ionomer composites

    Kunnamkuzhakkal James, N., Lafont, UL., van der Zwaag, S. & Groen, WA., 2014, In : Smart Materials and Structures. 23, 5, p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  352. Piezoelectric and mechanical properties of novel composites of PZT and a liquid crytalline thermosetting resin

    van den Ende, D. A., de Almeida, P. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 15, p. 6417-6425 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  353. Piezoelectric and mechanical properties of structured PZT-epoxy composites

    Kunnamkuzhakkal James, N., van den Ende, DA., Lafont, UL., van der Zwaag, S. & Groen, WA., 2013, In : Journal of Materials Research. 28, 4, p. 635-641 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  354. Piezoelectric and pyroelectric properties of conductive polyethylene oxide-lead titanate composites

    Khanbareh, H., van der Zwaag, S. & Groen, WA., 2015, In : Smart Materials and Structures. 24, 4, p. 46-51 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  355. Plasticity induced transformation in a metastable beta Ti-1023 alloy by controlled heat treatments

    Neelakantan, S., San Martin Fernandez, DM., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Technology. 25, 11, p. 1351-1358 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  356. Point contact abrasive wear behavior of MAX phase materials

    Qu, L., Bei, G., Nijemeisland, M., Cao, D., van der Zwaag, S. & Sloof, W. G., 2019, In : Ceramics International. 46, 2, p. 1722-1729

    Research output: Contribution to journalArticleScientificpeer-review

  357. Poling piezoelectric (K,Na,Li)NbO3-polydimethylsiloxane composites

    Deutz, D. B., Mascarenhas, N. T., van der Zwaag, S. & Groen, W. A., 27 Jul 2017, In : Ferroelectrics. 515, 1, p. 68-74 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  358. Position-dependent shear-induced austenite-martensite transformation in double-notched TRIP and dual-phase steel samples

    Blonde, RJP., Jimenez-Melero, E., Ponnusami, SA., Zhao, L., Schell, N., Bruck, EH., van der Zwaag, S. & van Dijk, NH., 2014, In : Journal of Applied Crystallography. 47, 3, p. 956-964 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  359. Positron annihilation spectroscopy as a tool to develop self healing in aluminium alloys

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera, A. & van Dijk, NH., 2007, In : Physica Status Solidi. C: Current Topics in Solid State Physics. 4, 10, p. 3469-3472 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  360. Positron annihilation study of ageing precipitation in deformed Fe-Cu-B-N-C

    Zhang, S., Schut, H., Kohlbrecher, J., Langelaan, G., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2013, In : Philosophical Magazine (London, 2003). 93, p. 4182-4197 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  361. Positron annihilation study on deformation-induced Au precipitation in Fe-Au and Fe-Au-B-N alloys

    Zhang, S., Schut, H., Cizek, J., Tichelaar, FD., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2013, In : Journal of Materials Science. 49, 6, p. 2509-2518 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  362. Positron annihilation study on repeated deformation/precipitation aging in Fe-Cu-B-N alloys

    He, SM., Brandhoff, PN., Schut, H., van der Zwaag, S. & van Dijk, NH., 2013, In : Journal of Materials Science. 48, 18, p. 6150-6156 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  363. Postponing crack nucleation in 2024 aluminium alloy by dynamic precipitation from the supersaturated state

    Mahdavi Shahri, M., Alderliesten, RC., van der Zwaag, S. & Schut, H., 2014, In : Advanced Materials Research. 891-892, p. 1577-1584 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  364. Precipitation kinetics in Al6061 and in an Al6061-alumina particle composite.

    Chen, SP., Mussert, KM. & van der Zwaag, S., 1998, In : Journal of Materials Science. 33, p. 4477-4483 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  365. Predicting the Austenite Fraction After Intercritical Annealing in Lean Steels as a Function of the Initial Microstructure

    Chen, H., Xu, X., Xu, W. & van der Zwaag, S., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45a, 4, p. 1675-1679 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  366. Predicting the Transition between Upper and Lower Bainite via a Gibbs Energy Balance Approach

    Yang, Z., Xu, W., Yang, Z., Zhang, C., Chen, H. & van der Zwaag, S., 2016, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  367. Predicting the cooperative effect of Mn–Si and Mn–Mo on the incomplete bainite formation in quaternary Fe–C alloys

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Philosophical Magazine Letters. 98, 4, p. 161-171

    Research output: Contribution to journalArticleScientificpeer-review

  368. Predicting the effect of Mo, Ni, and Si on the bainitic stasis

    Chen, H. & van der Zwaag, S., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 8, p. 3429-3437 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  369. Predicting the effect of alloy composition on the intermetallic phase transformation kinetics in 6XXX extrusion alloys.

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, In : Materials Forum. 28, p. 1040-1045 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  370. Predicting the stress-strain behaviour of carbon steel under hot working conditions: an irreversible thermodynamics model

    Huang, M., del Castillo, PEJRD., Perlade, A. & van der Zwaag, S., 2009, In : Scripta Materialia. 61, 6, p. 648-651 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  371. Prediction and validation of the austenite phase fraction upon intercritical annealing of medium Mn steels

    Farahani, H., Xu, W. & van der Zwaag, S., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 11, p. 4978-4985 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  372. Prediction of decarburized ferrite depth of hypoeutectoid steel with simultaneous oxidation

    Choi, SW. & van der Zwaag, S., 2012, In : ISIJ International. 52, 4, p. 549-558 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  373. Prediction of the abrasion resistance of construction steels on the basis of the subsurface deformation layer in a multi-pass dual-indenter scratch test

    Xu, X., van der Zwaag, S. & Xu, W., 2015, In : Wear. 338-339, September, p. 47-53 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  374. Prediction of the martensite start temperature for beta titanium alloys as a function of composition

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Scripta Materialia. 60, 8, p. 611-614 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  375. Preferential Au precipitation at deformation-induced defects in Fe-Au and Fe-Au-B-N alloys

    Zhang, S., Langelaan, G., Brouwer, JC., Sloof, WG., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2014, In : Journal of Alloys and Compounds. 584, p. 425-429 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  376. Process-time Optimization of Vacuum Degassing Using a Genetic Alloy Design Approach

    Dilner, DVEV., Lu, Q., Mao, H., Xu, W., van der Zwaag, S. & Selleby, M., 2014, In : Materials. 7, p. 7997-8011 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  377. Properties of quasi 1-3 piezoelectric pzt-epoxy composites obtained by dielectrophoresis

    van den Ende, DA., bory, BF., Groen, WA. & van der Zwaag, S., 2010, In : Integrated Ferroelectrics. 114, 1, p. 108-118 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  378. Property Optimisation in Fibre Metal Laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2004, In : Applied Composite Materials: an international journal for the science and application of composite materials. 11, p. 63-76 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  379. Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach

    Xu, W. & van der Zwaag, S., 2011, In : ISIJ International. 51, 6, p. 1005-1010 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  380. Protecting the MoSi2 healing particles for thermal barrier coatings using a sol-gel produced Al2O3 coating

    Carabat, A. L., Meijerink, M. J., Brouwer, J. C., Kelder, E. M., van Ommen, J. R., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the European Ceramic Society. 38, 7, p. 2728-2734

    Research output: Contribution to journalArticleScientificpeer-review

  381. Quantification of the evolution of the 3D intemetallic structure in a 6005A aluminium alloy during a homogenisation treatment.

    Kuijpers, NCW., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2002, In : Materials Characterization. 48, p. 379-392 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  382. Quantification of the evolution of the 3D intermetallic structure in a 6005A aluminium alloy during a homogenisation treatment

    Kuijpers, NCW., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2003, In : Materials Characterization. 48, p. 379-392 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  383. Quantification of the recrystallization behaviour in Al-alloy AA1050

    Chen, SP., Hanlon, DN., van der Zwaag, S., Pei, YT. & Hosson, T., 2002, In : Journal of Materials Science. 37, p. 989-995 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  384. Quantifying anisotropic solute transport in protein crystals using 3-D laser scanning confocal microscopy visualization

    Cvetkovic, A., Straathof, AJJ., van der Wielen, LAM., van der Zwaag, S., Krishna, R. & Hanlon, DN., 2004, In : Biotechnology and Bioengineering. 86, 4, p. 389-398 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  385. Quantitative criteria to design optimal permeable trailing edges for noise abatement

    Rubio Carpio, A., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 27 Oct 2020, In : Journal of Sound and Vibration. 485, 23 p., 115596.

    Research output: Contribution to journalArticleScientificpeer-review

  386. Quantitative dilatometric analysis of intercritical annealing in a low-silicon TRIP steel

    Zhao, L., Kop, TA., Rolin, V., Sietsma, J., Mertens, AIM., Jacques, PJ. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 1585-1591 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  387. Quantitative predictions of maximum strain storage in shape memory polymers (SMP)

    Hornat, C. C., Nijemeisland, M., Senardi, M., Yang, Y., Pattyn, C., van der Zwaag, S. & Urban, M. W., 2020, In : Polymer. 186, 5 p., 122006.

    Research output: Contribution to journalArticleScientificpeer-review

  388. Real-time martensitic transformation kinetics in maraging steel under high magnetic fields

    San Martin, D., van Dijk, NH., Jimenez-Melero, E., Kampert, E., Zeitler, U. & van der Zwaag, S., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 527, 20, p. 5241-5245 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  389. Real-time synchrotron X-ray diffraction study on the isothermal martensite transformation of maraging steel in high magnetic fields

    San Martin, D., Jimenez-Melero, E., Duffy, JA., Honkimaki, V., van der Zwaag, S. & van Dijk, NH., 2012, In : Journal of Applied Crystallography. 45, 4, p. 748-757 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  390. Recovery Processes in the Ferrite Phase in C-Mn Steel

    Smith, A., Luo, H., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 7, p. 1188-1194 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  391. Recrystallisation Texture of Cold Rolled and Annealed IF Steel Produced from Ferritic Rolled Hot Strip

    Elsner, A., Kaspar, R., Ponge, D., Raabe, D. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 257-262 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  392. Recrystallisation and concurrent precipitation in hot rolled AA 3103

    Miroux, AG., Lok, ZJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 393-398 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  393. Reducing the erosive wear rate of Cr2AlC MAX phase ceramic by oxidative healing of local impact damage

    Shen, L., Eichner, D., van der Zwaag, S., Leyens, C. & Sloof, W. G., 2016, In : Wear. 358-359, p. 1-6

    Research output: Contribution to journalArticleScientificpeer-review

  394. Relationship between the network dynamics, supramolecular relaxation time and healing kinetics of cobalt poly(butyl acrylate) ionomers

    Bose, RK., Hohlbein, N., Garcia Espallargas, SJ., Schmidt, AM. & van der Zwaag, S., 2015, In : Polymer. 69, July, p. 228-232 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  395. Repeated crack healing in MAX-phase ceramics revealed by 4D in situ synchrotron X-ray tomographic microscopy

    Sloof, WG., Pei, R., McDonald, SA., Fife, JL., Shen, L., Boatemaa, L., Farle, AS., Yan, K., Zhang, X., van der Zwaag, S., Lee, PD. & Withers, PJ., 2016, In : Scientific Reports. 6, p. 1 - 9 23040 .

    Research output: Contribution to journalArticleScientificpeer-review

  396. Reply to the discussion by Aaronson et al. to "Grain nucleation and growth during phase transformations" by S.E. Offerman et al., Science, 298, 1003 (Nov. 1, 2002)

    Offerman, SE., van Dijk, NH., Sietsma, J., van der Zwaag, S., Lauridsen, EM., Margulies, L., Grigull, S. & Poulsen, HF., 2004, In : Scripta Materialia. 51, p. 937-941 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  397. Review of current strategies to induce self-healing behaviour in fibre reinforced polymer based composites

    van der Zwaag, S., Grande, AM., Post, W., Garcia Espallargas, SJ. & Bor, T., 2014, In : Materials Science and Technology. 30, 13a, p. 1633-1641 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  398. Robust piezoelecric composites for energy harvesting in high-strain environments

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2013, In : Journal of Intelligent Material Systems and Structures. 24, 18, p. 2262-2269 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  399. Robust piezoelectric composites for energy harvesting in high strain environments

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2012, In : Journal of Intelligent Material Systems and Structures. p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  400. Route to stable non-spherical emulsion droplets

    Bon, SAF., Mookhoek, SD., Colver, PJ., Fischer, H. & van der Zwaag, S., 2007, In : European Polymer Journal. 43, 11, p. 4839-4842 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  401. Routes and mechanisms towards self healing behaviour in engineering materials

    van der Zwaag, S., 2010, In : Bulletin of The Polish Academy of Sciences. . Technical Sciences. 58, 2, p. 215-224 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  402. SANS experiments on Nb(C,N) and MnS precipitates in HSLA steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S978-S980

    Research output: Contribution to journalArticleScientificpeer-review

  403. Selection of healing agents for autonomous healing of alumina at high temperatures

    Boatemaa, L., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2016, In : Journal of the European Ceramic Society. 36, 16, p. 4141-4145

    Research output: Contribution to journalArticleScientificpeer-review

  404. Self healing of creep damage by gold precipitation in iron alloys

    Zhang, S., Kwakernaak, C., Sloof, WG., Brueck, EH., van der Zwaag, S. & van Dijk, NH., 2015, In : Advanced Engineering Materials. 17, 5, p. 598-603 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  405. Self healing of creep damage in iron-based alloys by supersaturated tungsten

    Fang, H., Szymanski, N., Versteylen, C. D., Cloetens, P., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Balachandran, S., Herbig, M., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2019, In : Acta Materialia. 166, p. 531-542

    Research output: Contribution to journalArticleScientificpeer-review

  406. Self healing of deformation damage in underaged Al-Cu-Mg alloys

    Hautakangas, SM., Schut, H., van Dijk, NH., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Scripta Materialia. 58, p. 719-722 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  407. Self healing of radiation-induced damage in Fe–Au and Fe–Cu alloys: Combining positron annihilation spectroscopy with TEM and ab initio calculations

    Zhang, S., Cizek, J., Yao, Z., Oleksandr, M., Kong, X., Liu, C., van Dijk, N. & van der Zwaag, S., 2020, In : Journal of Alloys and Compounds. 817, 152765.

    Research output: Contribution to journalArticleScientificpeer-review

  408. Self-Healing Glass Fiber Reinforced Polymer Composites Based on Montmorillonite Reinforced Compartmented Alginate Fibers

    Post, W., Jeoffroy, E., Garcia, S. J. & van der Zwaag, S., 2017, In : Polymer Composites. 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  409. Self-Healing Phenomena in Metals

    van Dijk, N. & van der Zwaag, S., 1 Jan 2018, In : Advanced Materials Interfaces. 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  410. Self-Healing Polymer Networks Based on Reversible Michael Addition Reactions

    Kuhl, N., Geitner, R., Bose, R. K., Bode, S., Dietzek, B., Schmitt, M., Popp, J., Garcia, S. J., van der Zwaag, S., Schubert, U. S. & Hager, M. D., 1 Nov 2016, In : Macromolecular Chemistry and Physics. 217, 22, p. 2541-2550 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  411. Self-healing behaviour in man-made engineering materials: bio-inspired but taking into account their intrinsic character

    van der Zwaag, S., van Dijk, NH., Jonkers, HM., Mookhoek, SD. & Sloof, WG., 2009, In : Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences. 367, p. 1689-1704 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  412. Self-healing materials

    Hager, MD., Greil, P., Leyens, C., van der Zwaag, S. & Schubert, US., 2010, In : Advanced Materials. 22, p. 5424-5430 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  413. Self-healing of Al2O3 containing Ti microparticles

    Boatemaa, L., van der Zwaag, S. & Sloof, W. G., 2018, In : Ceramics International. 44, 10, p. 11116-11126

    Research output: Contribution to journalArticleScientificpeer-review

  414. Self-healing thermal barrier coating systems fabricated by spark plasma sintering

    Nozahic, F., Estournès, C., Carabat, A. L., Sloof, W. G., van der Zwaag, S. & Monceau, D., 2018, In : Materials & Design. 143, p. 204-213

    Research output: Contribution to journalArticleScientificpeer-review

  415. Self-healing thermally conductive adhesives

    Lafont, UL., Moreno Belle, C., van Zeijl, HW. & van der Zwaag, S., 2014, In : Journal of Intelligent Material Systems and Structures. 25, 1, p. 67-74 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  416. Setup for EMI Shielding Effectiveness Tests of Electrically Conductive Polymer Composites at Frequencies up to 3.0 GHz

    Vieira Valente, R. D., De Ruijter, C., Vlasveld, D., Van Der Zwaag, S. & Groen, P., 23 Aug 2017, In : IEEE Access. 5, p. 16665-16675 11 p., 8015104.

    Research output: Contribution to journalArticleScientificpeer-review

  417. Simulations of pro-eutectoid ferrite formation using a mixed control growth model.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, 1, p. 104-116 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  418. Size distributions and volume fractions of dispersoids in hot and cold processed AA3103

    Anselmino, E., Miroux, AG. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, June, p. 680-685 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  419. Solid-state phase transformations involving solute partitioning: modeling and measuring on the level of individual grains

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4757-4766 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  420. Solute and second phase evolution during industrial processing of AA3103.

    Miroux, AG., Lok, ZJ., Marthinsen, K. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 281-286 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  421. Solute level determination in AA1200 and AA3103

    Lok, ZJ., Löchte, L. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, p. 647-653 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  422. Some observations on cyclic deformation structures in the high-strength commercial aluminium alloy AA7150.

    Hanlon, DN., Rainforth, WM. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2727-2736 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  423. Some observations on the effect of austenitisation conditions on the transformation kinetics in an HSLA steel and related C-Mn steels.

    Kop, TA., Remijn, PGW., Svetchnikov, V., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 38, p. 1863-1871 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  424. Stabilization mechanisms of retained austenite in transformation-induced plasticity steel.

    Wang, J. & van der Zwaag, S., 2001, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 32A, p. 1527-1539 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  425. Stress reduction in a-C:H coatings through the addition of nitrogen to the feed gas

    Rabbani, F., Escobar Galindo, R., Arnoldbik, WM., van der Zwaag, S., van Veen, A. & Schut, H., 2004, In : Diamond and Related Materials. 13, p. 1645-1657 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  426. Structure, dielectric and piezoelectric properties of donor doped PZT ceramics across the phase diagram

    Shaji Karapuzha, A., Kunnamkuzhakkal James, N., Khanbareh, H., van der Zwaag, S. & Groen, W. A., 13 Nov 2016, In : Ferroelectrics. 504, 1, p. 160-171 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  427. Switchable static friction of piezoelectric composites - silicon wafer contacts

    van den Ende, DA., Fischer, H., Groen, WA. & van der Zwaag, S., 2013, In : Applied Physics Letters. 102, 4, p. 1-4 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  428. Synergetic active corrosion protection of AA2024-T3 by 2D- anionic and 3D-cationic nanocontainers loaded with Ce and mercaptobenzothiazole

    Abdolahzadeh, M., Tedim, J., Zheludkevich, M., van der Zwaag, S. & Garcia, S. J., 2018, In : Corrosion Science: the journal on environmental degradation of materials and its control. 135, p. 35-45

    Research output: Contribution to journalArticleScientificpeer-review

  429. Synthesis and characterization of silica microcapsules using a sustainable solvent system template

    Galgali, GS., Schlangen, E. & van der Zwaag, S., 2011, In : Materials Research Bulletin. 46, 12, p. 2445-2449 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  430. Synthesis of high-purity, isotropic or textured Cr2AlC bulk ceramics by spark plasma sintering of pressure-less sintered powders

    Duan, X., Shen, L., Jia, D., Zhou, E., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 5, p. 1393-1400 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  431. Synthesis, characterization, and CO2 uptake of mellitic triimide-based covalent organic frameworks

    Veldhuizen, H., Vasileiadis, A., Wagemaker, M., Mahon, T., Mainali, D. P., Zong, L., van der Zwaag, S. & Nagai, A., 2019, In : Journal of Polymer Science, Part A: Polymer Chemistry. 57, 24, p. 2373-2377 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  432. Synthesis, crystal structure, microstructure and mechanical properties of (Ti1-xZrx)3SiC2 MAX phase solid solutions

    Qu, L., Bei, G., Stelzer, B., Rueß, H., Schneider, J. M., Cao, D., van der Zwaag, S. & Sloof, W. G., 2019, In : Ceramics International. 45, 1, p. 1400-1408

    Research output: Contribution to journalArticleScientificpeer-review

  433. Tailoring of Ostwald ripening behaviour in multicomponent Al alloys

    Rivera Diaz del Castillo, PEJ., Reischig, P. & van der Zwaag, S., 2005, In : Scripta Materialia. 52, 8, p. 705-708 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  434. Tailoring the release of encapsulated corrosion inhibitors from damaged coatings: controlled release kinetics by overlapping diffusion fonts

    Javierre, E., Garcia Espallargas, SJ., Mol, JMC., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2012, In : Progress in Organic Coatings. 75, 1-2, p. 20-27 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  435. Texture and microstructure development during intercritical rolling of low-carbon steels

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, p. 1589-1603 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  436. The Compositional Dependence of the Microstructure and Properties of CMSX-4 Superalloys

    Yu, H., Xu, W. & van der Zwaag, S., 14 Nov 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  437. The Effect of Interfacial Element Partitioning on Ferrite and Bainite Formation

    Chen, H. & van der Zwaag, S., 2016, In : JOM. p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  438. The application of laser scanning confocal microscopy to tribological research.

    Hanlon, DN., Todd, I., Peekstok, ER., Rainforth, WM. & van der Zwaag, S., 2001, In : Wear. 251, p. 1159-1168 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  439. The bearing strenght of Fiber Metal Laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2005, In : Journal of Composite Materials. 40, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  440. The bearing strength of fibre metal laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2006, In : Journal of Composite Materials. 40, 1, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  441. The composition and temperature effects on the ultra high strength stainless steel design

    Xu, W., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : International Journal of Modern Physics B: condensed matter physics: statistical physics: applied physics. 23, 6-7, p. 1060-1065 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  442. The computational design of W and co-containing creep-resistant steels with barely coarsening laves phase and M23C6 as the strengthening precipitates

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45A, 13, p. 6067-6074 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  443. The design of a compositionally robust martensitic creep-resistant steel with an optimized combination of precipitation hardening and solid-solution strengthening for high-temperature use

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Acta Materialia. 77, p. 310-323 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  444. The dissolution of a stoichiometric second phase in ternary alloys: A numerical analysis.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, p. 93-103 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  445. The effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 5, p. 533-543 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  446. The effect of beta, beta' and beta'' precipitates in a homogenised AA6063 alloy on the hot deformability and the peak hardness.

    van de Langkruis, J., Kool, WH., Sellars, CM., van der Winden, MR. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 229, p. 105-115 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  447. The effect of calcining temperature on the properties of 0-3 piezoelectric composites of PZT and a liquid crystalline thermosetting polymer

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2011, In : Journal of Electroceramics. 27, 1, p. 13-19 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  448. The effect of cluster plasticisation on the self healing behaviour of ionomers

    Varley, R. J., Shen, S. & van der Zwaag, S., 2010, In : Polymer. 51, 3, p. 679-686 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  449. The effect of ferrite-martensite morphology on the scratch and abrasive wear behaviour of a dual phase construction steel

    Xu, X., van der Zwaag, S. & Xu, W., 2016, In : Wear. 348-349, February, p. 148-157 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  450. The effect of filler parameters on the healing of thermal conductivity and mechanical properties of a thermal interface material based on a self-healable organic-inorganic polymer matrix

    Zhong, N., Garcia, S. J. & Van Der Zwaag, S., 15 Jul 2016, In : Smart Materials and Structures. 25, 8, 084016.

    Research output: Contribution to journalArticleScientificpeer-review

  451. The effect of geometrical assumptions in modeling solid-state transformation kinetics.

    van Leeuwen, Y., Vooijs, S., Sietsma, J. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2925-2931 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  452. The effect of martensite volume fraction on the scratch and abrasion resistance of a ferrite-martensite dual phase steel

    Xu, X., van der Zwaag, S. & Xu, W., 2016, In : Wear. 348-349, February, p. 80-88 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  453. The effect of mechanical surface patterning on filiform growth characteristics

    Mol, JMC., de Wit, JHW. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, 13, p. 2755-2761 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  454. The effect of metalworking fluids on the gas-nitriding behavour of 31CrMoV9 steel.

    Pennings, B. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1215-1217 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  455. The effect of plastic deformation of austenite on the kinetics of subsequent ferrite formation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1028-1036 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  456. The effect of the TiC particle size on the preferred oxidation temperature for self-healing of oxide ceramic matrix materials

    Boatemaa, L., Brouwer, H., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of Materials Science. 53, 8, p. 5973-5986

    Research output: Contribution to journalArticleScientificpeer-review

  457. The effect of the intrinsic electrical matrix conductivity on the piezoelectric charge constant of piezoelectric composites

    Stuber, V. L., Mahon, T. R., Van Der Zwaag, S. & Groen, P., 2019, In : Materials Research Express. 7, 1, 015703.

    Research output: Contribution to journalArticleScientificpeer-review

  458. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  459. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, 15, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  460. The formability of spray-formed, high-chromium contenc, white cast iron.

    Hanlon, DN., Li, YH., Rainforth, WM., Sellars, CM. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1637-1640 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  461. The impact of intended service temperature on the optimal composition of Laves and M23C6 precipitate strengthened ferritic creep resistant steels

    Lu, Q., Toda, Y., Harada, N., Xu, W. & van der Zwaag, S., 2015, In : Computational Materials Science. 107, September, p. 110-115 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  462. The influence of carbon diffusion on the character of the gamma-alpha phase transformation in steel

    van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, No. 5, p. 767-773 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  463. The influence of nitrogen on the austenite/ferrite interface mobility in Fe-1at.%Si

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 323, p. 403-408 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  464. The influence of the lateral filament texture on the compressive properties of pppta aramid filaments

    Knijnenberg, A., Koenders, BM., Gebben, B., Klop, E., Young, RJ. & van der Zwaag, S., 2010, In : Journal of Materials Science. 45, 10, p. 2708-2714 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  465. The isothermal martensite formation in a maraging steel: a magnetic study

    San Martin, D., van Dijk, NH., Brück, E. & van der Zwaag, S., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 481-482, p. 757-761 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  466. The mechanical properties of aa2024 as funcion of the interrupted ageing conditions

    Risanti, DD., Yin, M., Chen, J. & van der Zwaag, S., 2010, In : Materials Science Forum. p. 638-642 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  467. The mechanical stability of retained austenite in low-alloyed TRIP steel under shear loading

    Blonde, RJP., Jimenez-Melero, E., Zhao, L., Schell, N., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 594, p. 125-134 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  468. The role of nucleation behaviour in phase field simulations of the austenite to ferrite transformation.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2008, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 39A, p. 1237-1247 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  469. The scratch and abrasive wear behaviour of a tempered martensitic construction steel and its dual phase variants

    Xu, X., van der Zwaag, S. & Xu, W., 15 Jul 2016, In : Wear. 358-359, p. 80-88 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  470. The structure of a general materials genome approach to the design of new steel grades for specific properties

    Xu, W., Lu, Q., Xu, X. & van der Zwaag, S., 2013, In : Computer Methods In Materials Science. 13, 3, p. 382-394 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  471. Theoretical study of P-containing transformation-induced plasticity steel. Part 1 - determination of the phosphorus concentration.

    Wang, J. & van der Zwaag, S., 2001, In : Zeitschrift fuer Metallkunde. 92, 12, p. 1299-1305 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  472. Theoretical study of P-containing transformation-induced plasticity steel. Part 2 - Analysis of the potential TRIP effect.

    Wang, J. & van der Zwaag, S., 2001, In : Zeitschrift fuer Metallkunde. 92, 12, p. 1306-1311 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  473. Theory for diffusional transformation kinetics: Multicomponent and multiphase systems

    Rivera Diaz del Castillo, PEJ., Reischig, P., Xu, W. & van der Zwaag, S., 2005, In : Scripta Materialia. 53, 9, p. 1089-1094 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  474. Thermal and mechanical stability of retained austenite in aluminium containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2003, In : ISIJ International. 42, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  475. Thermal and mechanical stability of retained austenite in aluminium-containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2002, In : ISIJ International. 42, 12, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  476. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling

    van Dijk, NH., Butt, AM., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2005, In : Acta Materialia. 53, p. 5439-5447 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  477. Thermally activated precipitation at deformation induced defects in Fe-Cu and Fe-Cu-B-N alloys studied by positron annihilation spectroscopy

    He, S., van Dijk, NH., Schut, H., Peekstok, ER. & van der Zwaag, S., 2010, In : Physical Review B (Condensed Matter and Materials Physics). 81, 094103, p. 094103-1-094103-10

    Research output: Contribution to journalArticleScientificpeer-review

  478. Thermo – mechanical properties of SPS produced self-healing thermal barrier coatings containing pure and alloyed MoSi2 particles

    Kulczyk-Malecka, J., Zhang, X., Carr, J., Nozahic, F., Estournès, C., Monceau, D., Carabat, A. L., Sloof, W. G., van der Zwaag, S., Withers, P. J. & Xiao, P., 2018, In : Journal of the European Ceramic Society. 38, 12, p. 4268-4275

    Research output: Contribution to journalArticleScientificpeer-review

  479. Three-dimensional phase field modelling of the austenite-to-ferrite transformation.

    Militzer, M., Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 3961-3972 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  480. Towards an understanding of thermally activated self-healing of an ionomer system during ballistic penetration

    Varley, R. J. & van der Zwaag, S., 2008, In : Acta Materialia. 56, 19, p. 5737-5750 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  481. Transformation-induced plasticity in multiphase steels subjected to thermal-mechanical loading

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, p. 3369-3387 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  482. Tuning the stress induced martensitic formation in titanium alloys by alloy design

    Li, C., Chen, H., Wu, X., Wang, W. & van der Zwaag, S., 2012, In : Journal of Materials Science. 47, 9, p. 4093-4100 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  483. Ultra-high temperature ablation behavior of MoAlB ceramics under an oxyacetylene flame

    Bei, G., van der Zwaag, S., Kota, S., Barsoum, M. W. & Sloof, W. G., 2019, In : Journal of the European Ceramic Society. 39, 6, p. 2010-2017

    Research output: Contribution to journalArticleScientificpeer-review

  484. Ultra-high temperature ablation behavior of Ti2AlC ceramics under an oxyacetylene flame

    Song, G., Li, S., Zhao, C., Sloof, WG., van der Zwaag, S., Pei, YT. & Hosson, T., 2011, In : Journal of the European Ceramic Society. 31, p. 855-862 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  485. Unravelling the abrasion resistance of two novel meta-stable titanium alloys on the basis of multi-pass-dual-indenter tests

    Li, C., Li, H. & van der Zwaag, S., 15 Dec 2019, In : Wear. 440-441, 13 p., 203094.

    Research output: Contribution to journalArticleScientificpeer-review

  486. Article › Professional
  487. Alternatieven voor zeldzame grondstoffen ontwerpen; Vervangingstechniek

    van der Zwaag, S., 2011, In : De Ingenieur. p. 20-22 3 p.

    Research output: Contribution to journalArticleProfessional

  488. Een nieuw materiaal ontwerp perspectief: zelf-hertellende materialen

    Mookhoek, SD. & van der Zwaag, S., 2007, In : De Constructeur. 1/2, p. 38-40 3 p.

    Research output: Contribution to journalArticleProfessional

  489. Een nieuwe materiaalkundige benadering voor een duurzame en veilige maatschappij

    van der Zwaag, S., 2008, In : Impulsen voor Economie en Samenleving. p. 21-22 2 p.

    Research output: Contribution to journalArticleProfessional

  490. Eerste toepassingen selfhealing coatings over vijf jaar verwacht

    van der Zwaag, S. & Mol, A., 2009, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 3, p. 30-33 4 p.

    Research output: Contribution to journalArticleProfessional

  491. Heal Thyself - Damage Management by Design

    Mookhoek, SD. & van der Zwaag, S., 2008, In : Plastics Innovations. 1, 44, p. 56-59 4 p.

    Research output: Contribution to journalArticleProfessional

  492. Herstel zonder onderhoud

    van der Zwaag, S., 2011, In : Maintenance Management. 10, p. 34-35 2 p.

    Research output: Contribution to journalArticleProfessional

  493. Ionomer for Self Healing Applications

    Varley, R. J. & van der Zwaag, S., 2007, In : Leonardo times. p. 40-41 2 p.

    Research output: Contribution to journalArticleProfessional

  494. Materials are Forever

    van der Zwaag, S., 2007, In : Kunststof Magazine. p. 30-30 1 p.

    Research output: Contribution to journalArticleProfessional

  495. Na beton en asfalt ook hout zelfhelend: Mogelijkheden lijken na tien jaar onderzoek schier oneindig. Door Ad Tissink

    van der Zwaag, S., 2015, In : Cobouw: vakdagblad voor de bouwwereld. 159, 191

    Research output: Contribution to journalArticleProfessional

  496. Onderzoek naar zichzelf reparerende materialen wint aan momentum

    van der Zwaag, S., 2007, In : Kunststof Magazine. 9, p. 32-35 4 p.

    Research output: Contribution to journalArticleProfessional

  497. Ontwikkeling zelfherstellende materialen vertakt in meerdere onderzoekrichtingen

    van der Zwaag, S., 2008, In : Kunststof Magazine. 1, p. 32-34 3 p.

    Research output: Contribution to journalArticleProfessional

  498. Schadeherstel: Een zelfherstellend materiaal doet dat nu allemaal zelf

    van der Zwaag, S., Brinkman, E. & van Hees, RPJ., 2012, In : Stedebouw en Architectuur. 2012, p. 20-23 4 p.

    Research output: Contribution to journalArticleProfessional

  499. Secrets of steel revealed by neutrons.

    Schrauwers, A., te Velthuis, SGE., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1999, In : Delft Outlook. 1, p. 8-12 5 p.

    Research output: Contribution to journalArticleProfessional

  500. Self-heaing Ti4AIC2 ceramic, a promising high temperature material for aerospace engineering

    Song, G. & van der Zwaag, S., 2007, In : Leonardo times. 4, p. 22-23 2 p.

    Research output: Contribution to journalArticleProfessional

  501. Self-healing TI3AIC2 ceramic

    van der Zwaag, S., 2007, In : Leonardo times. p. 22-23 2 p.

    Research output: Contribution to journalArticleProfessional

Previous 1 2 Next

ID: 142717