1. 2019
  2. Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel

    Shen, C., Wang, C., Wei, X., Li, Y., van der Zwaag, S. & Xu, W., 15 Oct 2019, In : Acta Materialia. 179, p. 201-214 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Direct TEM observation of α/γ interface migration during cyclic partial phase transformations at intercritical temperatures in an Fe-0.1C −0.5Mn alloy

    Nutter, J., Farahani, H., Rainforth, W. M. & van der Zwaag, S., 1 Oct 2019, In : Acta Materialia. 178, p. 68-78 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Damage evolution in a self-healing air plasma sprayed thermal barrier coating containing self-shielding MoSi 2 particles

    Chen, Y., Zhang, X., van der Zwaag, S., Sloof, W. G. & Xiao, P., 1 Aug 2019, In : Journal of the American Ceramic Society. 102, 8, p. 4899-4910 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. 3D-printed Perforated Trailing Edges for Broadband Noise Abatement

    Rubio Carpio, A., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, 25th AIAA/CEAS Aeroacoustics Conference: 20-23 May 2019 Delft, The Netherlands. AIAA, 13 p. AIAA 2019-2458

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. A deconvolution protocol of the mechanical relaxation spectrum to identify and quantify individual polymer feature contributions to self-healing

    Montano, V., Picken, S. J., Van Der Zwaag, S. & Garcia, S. J., 2019, In : Physical Chemistry Chemical Physics. 21, 19, p. 10171-10184 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 2, p. 533-545 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Computational investigation of porosity effects on fracture behavior of thermal barrier coatings

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 2019, In : Ceramics International. 45, 16, p. 20518-20527 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Determination of mode switching in cyclic partial phase transformation in Fe-0.1C-xMn alloys as a function of the Mn concentration

    Farahani, H., Xu, W. & van der Zwaag, S., 2019, In : JOM. 71, 4, p. 1313 - 1321

    Research output: Contribution to journalArticleScientificpeer-review

  10. Experimental characterization of the turbulent boundary layer over a porous trailing edge for noise abatement

    Rubio Carpio, A., Merino Martínez, R., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, In : Journal of Sound and Vibration. 443, p. 537-558 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Flexible Lead-Free Piezoelectric Composite Materials for Energy Harvesting Applications

    Stuber, V. L., Deutz, D. B., Bennett, J., Cannel, D., de Leeuw, D. M., van der Zwaag, S. & Groen, P., 2019, In : Energy Technology. 7, 1, p. 177-185 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. In situ high-temperature EBSD and 3D phase field studies of the austenite-ferrite transformation in a medium Mn steel

    Farahani, H., Zijlstra, G., Mecozzi, M. G., Ocelík, V., De Hosson, J. T. M. & Van Der Zwaag, S., 2019, In : Microscopy and Microanalysis. 25, 3, p. 639-655

    Research output: Contribution to journalArticleScientificpeer-review

  13. Kinetics of zircon formation in yttria partially stabilized zirconia as a result of oxidation of embedded molybdenum disilicide

    Nozahic, F., Carabat, A. L., Mao, W., Monceau, D., Estournes, C., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2019, In : Acta Materialia. 174, p. 206-216

    Research output: Contribution to journalArticleScientificpeer-review

  14. Point contact abrasive wear behavior of MAX phase materials

    Qu, L., Bei, G., Nijemeisland, M., Cao, D., van der Zwaag, S. & Sloof, W. G., 2019, (Accepted/In press) In : Ceramics International.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Self healing of creep damage in iron-based alloys by supersaturated tungsten

    Fang, H., Szymanski, N., Versteylen, C. D., Cloetens, P., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Balachandran, S., Herbig, M., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2019, In : Acta Materialia. 166, p. 531-542

    Research output: Contribution to journalArticleScientificpeer-review

  16. Synthesis, crystal structure, microstructure and mechanical properties of (Ti1-xZrx)3SiC2 MAX phase solid solutions

    Qu, L., Bei, G., Stelzer, B., Rueß, H., Schneider, J. M., Cao, D., van der Zwaag, S. & Sloof, W. G., 2019, In : Ceramics International. 45, 1, p. 1400-1408

    Research output: Contribution to journalArticleScientificpeer-review

  17. Ultra-high temperature ablation behavior of MoAlB ceramics under an oxyacetylene flame

    Bei, G., van der Zwaag, S., Kota, S., Barsoum, M. W. & Sloof, W. G., 2019, In : Journal of the European Ceramic Society. 39, 6, p. 2010-2017

    Research output: Contribution to journalArticleScientificpeer-review

  18. 2018
  19. Modelling the fracture behaviour of thermal barrier coatings containing healing particles

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 5 Nov 2018, In : Materials and Design. 157, p. 75-86 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Identifying the Role of Primary and Secondary Interactions on the Mechanical Properties and Healing of Densely Branched Polyimides

    Susa, A., Mordvinkin, A., Saalwächter, K., Van Der Zwaag, S. & Garcia, S. J., 15 Oct 2018, In : Macromolecules. 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. A Computational Design Study of Self-healing Creep Resistant Steels

    Fu, Y., van Dijk, N. & van der Zwaag, S., 12 Oct 2018. 1 p.

    Research output: Contribution to conferencePosterScientific

  22. Routes to Make Natural Rubber Heal: A Review

    Hernández Santana, M., den Brabander, M., García, S. & van der Zwaag, S., 2 Oct 2018, In : Polymer Reviews. 58, 4, p. 585-609 25 p.

    Research output: Contribution to journalReview articleScientificpeer-review

  23. Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy

    Dong, H., Chen, H., Wang, W., Zhang, Y., Miyamoto, G., Furuhara, T., Zhang, C., Yang, Z. & van der Zwaag, S., 1 Oct 2018, In : Acta Materialia. 158, p. 167-179 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. On the Relationship between the Chromium Concentration, the Z-Phase Formation and the Creep Strength of Ferritic-Martensitic Steels

    Yu, H., Xu, W. & van der Zwaag, S., 1 Oct 2018, In : Steel Research International. 89, 10, 8 p., 1800177.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Self-Healing Materials are Coming of Age

    Leeuwenburgh, S. C. G., De Belie, N. & van der Zwaag, S., 7 Sep 2018, In : Advanced Materials Interfaces. 5, 17, 3 p., 1800736.

    Research output: Contribution to journalEditorialScientific

  26. A translation of the structure of mussel byssal threads into synthetic materials by the utilization of histidine-rich block copolymers

    Enke, M., Bose, R. K., Zechel, S., Vitz, J., Deubler, R., Garcia, S. J., Van Der Zwaag, S., Schacher, F. H., Hager, M. D. & Schubert, U. S., 7 Jul 2018, In : Polymer Chemistry. 9, 25, p. 3543-3551 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Effect of C and N and their absence on the kinetics of austenite-ferrite phase transformations in Fe-0.5Mn alloy

    Farahani, H., Zurob, H., Hutchinson, C. R. & van der Zwaag, S., 15 May 2018, In : Acta Materialia. 150, p. 224-235 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Analysis and experimental validation of the figure of merit for piezoelectric energy harvesters

    Deutz, D. B., Pascoe, J. A., Schelen, B., Van Der Zwaag, S., De Leeuw, D. M. & Groen, P., 1 May 2018, In : Materials Horizons. 5, 3, p. 444-453 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Self-Healing Phenomena in Metals

    van Dijk, N. & van der Zwaag, S., 1 Jan 2018, In : Advanced Materials Interfaces. 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. A Novel Approach for Controlling the Band Formation in Medium Mn Steels

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 6, p. 1998–2010 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. A cohesive-zone crack healing model for self-healing materials

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2018, In : International Journal of Solids and Structures. 134, p. 249-263

    Research output: Contribution to journalArticleScientificpeer-review

  32. An in-situ LSCM study on bainite Formation in a Fe-0.2C-1.5Mn-2.0Cr Alloy

    Sainis, S., Farahani, H., Gamsjäger, E. & van der Zwaag, S., 2018, In : Metals. 8, 7, 22 p., 498.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Analysis of the grain size evolution for ferrite formation in Fe-C-Mn steels using a 3D model under a mixed-mode interface condition

    Fang, H., Mecozzi, M. G., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 1, p. 41-53

    Research output: Contribution to journalArticleScientificpeer-review

  34. Autonomous high-temperature healing of surface cracks in Al2O3 containing Ti2AlC particles

    Boatemaa, L., Bosch, M., Farle, A. S., Bei, G. P., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the American Ceramic Society. 101, 12, p. 5684-5693

    Research output: Contribution to journalArticleScientificpeer-review

  35. In Situ 3D Neutron Depolarization Study of the Transformation Kinetics and Grain Size Evolution During Cyclic Partial Austenite-Ferrite Phase Transformations in Fe-C-Mn Steels

    Fang, H., van der Zwaag, S. & van Dijk, N. H., 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. In-situ EBSD observations of moving austenite-ferrite interfaces during intercritical annealing

    van der Zwaag, S., Farahani, H., Zijlstra, G., Mecozzi, P., Ocelik, V. & de Hosson, J., 2018. 1 p.

    Research output: Contribution to conferencePosterScientific

  37. Predicting the cooperative effect of Mn–Si and Mn–Mo on the incomplete bainite formation in quaternary Fe–C alloys

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Philosophical Magazine Letters. 98, 4, p. 161-171

    Research output: Contribution to journalArticleScientificpeer-review

  38. Protecting the MoSi2 healing particles for thermal barrier coatings using a sol-gel produced Al2O3 coating

    Carabat, A. L., Meijerink, M. J., Brouwer, J. C., Kelder, E. M., van Ommen, J. R., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the European Ceramic Society. 38, 7, p. 2728-2734

    Research output: Contribution to journalArticleScientificpeer-review

  39. Self-healing of Al2O3 containing Ti microparticles

    Boatemaa, L., van der Zwaag, S. & Sloof, W. G., 2018, In : Ceramics International. 44, 10, p. 11116-11126

    Research output: Contribution to journalArticleScientificpeer-review

  40. Self-healing thermal barrier coating systems fabricated by spark plasma sintering

    Nozahic, F., Estournès, C., Carabat, A. L., Sloof, W. G., van der Zwaag, S. & Monceau, D., 2018, In : Materials & Design. 143, p. 204-213

    Research output: Contribution to journalArticleScientificpeer-review

  41. Special Issue: Self‐Healing Materials

    Leeuwenburgh, S. C. G., De Belie, N. & van der Zwaag, S., 2018, In : Advanced Materials Interfaces. 5, 17

    Research output: Contribution to journalSpecial issueScientific

  42. Synergetic active corrosion protection of AA2024-T3 by 2D- anionic and 3D-cationic nanocontainers loaded with Ce and mercaptobenzothiazole

    Abdolahzadeh, M., Tedim, J., Zheludkevich, M., van der Zwaag, S. & Garcia, S. J., 2018, In : Corrosion Science: the journal on environmental degradation of materials and its control. 135, p. 35-45

    Research output: Contribution to journalArticleScientificpeer-review

  43. The effect of the TiC particle size on the preferred oxidation temperature for self-healing of oxide ceramic matrix materials

    Boatemaa, L., Brouwer, H., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of Materials Science. 53, 8, p. 5973-5986

    Research output: Contribution to journalArticleScientificpeer-review

  44. Thermo – mechanical properties of SPS produced self-healing thermal barrier coatings containing pure and alloyed MoSi2 particles

    Kulczyk-Malecka, J., Zhang, X., Carr, J., Nozahic, F., Estournès, C., Monceau, D., Carabat, A. L., Sloof, W. G., van der Zwaag, S., Withers, P. J. & Xiao, P., 2018, In : Journal of the European Ceramic Society. 38, 12, p. 4268-4275

    Research output: Contribution to journalArticleScientificpeer-review

  45. 2017
  46. A New Approach Toward Metal-Free Self-Healing Ionomers Based on Phosphate and Methacrylate Containing Copolymers

    Dahlke, J., Bose, R. K., Zechel, S., Garcia, S. J., van der Zwaag, S., Hager, M. D. & Schubert, U. S., 1 Dec 2017, In : Macromolecular Chemistry and Physics. 218, 23, 9 p., 1700340.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Effect of the polymer structure on the viscoelastic and interfacial healing behaviour of poly(urea-urethane) networks containing aromatic disulphides

    Grande, A. M., Martin, R., Odriozola, I., van der Zwaag, S. & Garcia, S. J., 1 Dec 2017, In : European Polymer Journal. 97, p. 120-128 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. The Compositional Dependence of the Microstructure and Properties of CMSX-4 Superalloys

    Yu, H., Xu, W. & van der Zwaag, S., 14 Nov 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Healing of a glass fibre reinforced composite with a disulphide containing organic-inorganic epoxy matrix

    Post, W., Cohades, A., Michaud, V., van der Zwaag, S. & Garcia, S. J., 10 Nov 2017, In : Composites Science and Technology. 152, p. 85-93 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Correction to: Imaging the Molecular Motions of Autonomous Repair in a Self-Healing Polymer (Advanced Materials, (2017), 29, 26, (1701017), 10.1002/adma.201701017)

    van der Kooij, H. M., Susa, A., García, S. J., van der Zwaag, S. & Sprakel, J., 6 Nov 2017, In : Advanced Materials. 29, 41, 1770296.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  51. Non-destructive monitoring of delamination healing of a CFRP composite with a thermoplastic ionomer interlayer

    Post, W., Kersemans, M., Solodov, I., Van Den Abeele, K., García, S. J. & van der Zwaag, S., 1 Oct 2017, In : Composites Part A: Applied Science and Manufacturing. 101, p. 243-253 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Setup for EMI Shielding Effectiveness Tests of Electrically Conductive Polymer Composites at Frequencies up to 3.0 GHz

    Vieira Valente, R. D., De Ruijter, C., Vlasveld, D., Van Der Zwaag, S. & Groen, P., 23 Aug 2017, In : IEEE Access. 5, p. 16665-16675 11 p., 8015104.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Abrasion resistance characterization of low alloy construction steels: A comparison between three different scratch test protocols

    Xu, X., van der Zwaag, S. & Xu, W., 15 Aug 2017, In : Wear. 384-385, p. 106-113 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Large area and flexible micro-porous piezoelectric materials for soft robotic skin

    Khanbareh, H., de Boom, K., Schelen, J. B. J., Scharff, R. B. N., Wang, C., van der Zwaag, S. & Groen, P., 15 Aug 2017, In : Sensors and Actuators A: Physical: an international journal devoted to research and development of physical and chemical transducers. 263, p. 554-562 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Contributions of hard and soft blocks in the self-healing of metal-ligand-containing block copolymers

    Bose, R. K., Enke, M., Grande, A. M., Zechel, S., Schacher, F. H., Hager, M. D., Garcia, S. J., Schubert, U. S. & van der Zwaag, S., 1 Aug 2017, In : European Polymer Journal. 93, p. 417-427 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. On the 650 °C thermostability of 9–12Cr heat resistant steels containing different precipitates

    Wang, H., Yan, W., van der Zwaag, S., Shi, Q., Wang, W., Yang, K. & Shan, Y., 1 Aug 2017, In : Acta Materialia. 134, p. 143-154 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Highly sensitive piezo particulate-polymer foam composites for robotic skin application

    Khanbareh, H., de Boom, K., van der Zwaag, S. & Groen, W. A., 27 Jul 2017, In : Ferroelectrics. 515, 1, p. 25-33 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Poling piezoelectric (K,Na,Li)NbO3-polydimethylsiloxane composites

    Deutz, D. B., Mascarenhas, N. T., van der Zwaag, S. & Groen, W. A., 27 Jul 2017, In : Ferroelectrics. 515, 1, p. 68-74 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Determination of the intrinsic α/γ interface mobility during massive transformations in interstitial free Fe-X alloys

    Zhu, J., Luo, H., Yang, Z., Zhang, C., van der Zwaag, S. & Chen, H., 1 Jul 2017, In : Acta Materialia. 133, p. 258-268 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Reply to Comment on "monitoring Network and Interfacial Healing Processes by Broadband Dielectric Spectroscopy: A Case Study on Natural Rubber"

    Hernandez Santana, M., Grande, A. M., Van Der Zwaag, S. & García, S. J., 3 May 2017, In : ACS Applied Materials and Interfaces. 9, 17, p. 14552-14554 3 p.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  61. Linking Surface Precipitation in Fe-Au Alloys to Its Self-healing Potential During Creep Loading

    Sun, W. W., Fang, H., van Dijk, N. H., van der Zwaag, S. & Hutchinson, C. R., 27 Feb 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 5, p. 2109–2114 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Effect of the piezoelectric ceramic filler dielectric constant on the piezoelectric properties of PZT-epoxy composites

    Khaliq, J., Deutz, D. B., Frescas, J. A. C., Vollenberg, P., Hoeks, T., van der Zwaag, S. & Groen, P., 1 Feb 2017, In : Ceramics International. 43, 2, p. 2774-2779 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel−An in-situ X-ray diffraction study

    Wiessner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 13 Jan 2017, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 682, p. 117-125 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. Broadband Trailing-Edge Noise Reduction Using Permeable Metal Foams

    Merino Martinez, R., Rubio Carpio, A., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2017, Proceedings of the 46th International Congress and Exposition on Noise Control Engineering Taming Noise and Moving Quiet: Taming Noise and Moving Quiet, 27-30 Aug 2017 Hong Kong, China. p. 4373-4383

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Crack healing behaviour of Cr2AlC MAX phase studied by X-ray tomography

    Pei, R., McDonald, S. A., Shen, L., van der Zwaag, S., Sloof, W. G., Withers, P. J. & Mummery, P. M., 2017, In : Journal of the European Ceramic Society. 37, 2, p. 441-450

    Research output: Contribution to journalArticleScientificpeer-review

  66. Delamination healing in GFRP interlayers by localized induction heating

    Jang, S., Post, W., van der Zwaag, S. & Garcia, S. J., 2017. 1 p.

    Research output: Contribution to conferencePosterScientific

  67. Effect of graphene content on the restoration of mechanical, electrical and thermal functionalities of a self-healing natural rubber

    Hernandez Santana, M., Mar Bernal, M., Grande, A., Zhong, N., van der Zwaag, S. & Garcia, S. J., 2017, In : Smart Materials and Structures. 26, 8, 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Flexible Piezoelectric Touch Sensor by Alignment of Lead-Free Alkaline Niobate Microcubes in PDMS

    Deutz, D. B., Mascarenhas, N. T., Schelen, J. B. J., de Leeuw, D. M., van der Zwaag, S. & Groen, P., 2017, In : Advanced Functional Materials. 27, 24, 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Imaging the Molecular Motions of Autonomous Repair in a Self-Healing Polymer

    van der Kooij, H. M., Susa, A., García, S. J., van der Zwaag, S. & Sprakel, J., 2017, In : Advanced Materials. 29, 26, 6 p., 1701017.

    Research output: Contribution to journalArticleScientificpeer-review

  70. In-situ poling and structurization of piezoelectric particulate composites

    Khanbareh, H., van der Zwaag, S. & Groen, P., 2017, In : Journal of Intelligent Material Systems and Structures. 28, 8, p. 2467-2472

    Research output: Contribution to journalArticleScientificpeer-review

  71. On the Cobalt: Tungsten/Chromium balance in martensitic creep resistant steels

    Yu, H., Xu, W. & van der Zwaag, S., 2017, In : Steel Research International. 89, 2, 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Oxidation and self-healing behaviour of spark plasma sintered Ta2AlC

    Farle, A. S. M., Stikkelman, J., van der Zwaag, S. & Sloof, W. G., 2017, In : Journal of the European Ceramic Society. 37, 5, p. 1969-1974

    Research output: Contribution to journalArticleScientificpeer-review

  73. Response to Comment on “Turning Vulcanized Natural Rubber into a Self-Healing Polymer: Effect of the Disulfide/Polysulfide Ratio”

    Hernandez Santana, M., Grande, A. & van der Zwaag, S., 2017, (Accepted/In press) In : ACS Sustainable Chemistry and Engineering. 5, 12, p. 11127-11129 3 p.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  74. Self-Healing Glass Fiber Reinforced Polymer Composites Based on Montmorillonite Reinforced Compartmented Alginate Fibers

    Post, W., Jeoffroy, E., Garcia, S. J. & van der Zwaag, S., 2017, In : Polymer Composites. 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. 2016
  76. Correlating the abrasion resistance of low alloy steels to the standard mechanical properties: A statistical analysis over a larger data set

    Xu, X., Ederveen, F. H., van der Zwaag, S. & Xu, W., 15 Dec 2016, In : Wear. 368-369, p. 92-100 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Autonomous filling of creep cavities in Fe-Au alloys studied by synchrotron X-ray nano-tomography

    Fang, H., Versteylen, C. D., Zhang, S., Yang, Y., Cloetens, P., Ngan-Tillard, D., Brück, E., van der Zwaag, S. & van Dijk, N. H., 1 Dec 2016, In : Acta Materialia. 121, p. 352-364 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. A metal salt dependent self-healing response in supramolecular block copolymers

    Enke, M., Bose, R. K., Bode, S., Vitz, J., Schacher, F. H., Garcia Espallargas, S. J., Van Der Zwaag, S., Hager, M. D. & Schubert, U. S., 22 Nov 2016, In : Macromolecules. 49, 22, p. 8418-8429 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Charting the 'composition-strength' space for novel austenitic, martensitic and ferritic creep resistant steels

    Lu, Q., van der Zwaag, S. & Xu, W., 14 Nov 2016, (Accepted/In press) In : Journal of Materials Science & Technology: an international journal in the field of materials science. 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Structure, dielectric and piezoelectric properties of donor doped PZT ceramics across the phase diagram

    Shaji Karapuzha, A., Kunnamkuzhakkal James, N., Khanbareh, H., van der Zwaag, S. & Groen, W. A., 13 Nov 2016, In : Ferroelectrics. 504, 1, p. 160-171 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Effect of the Dianhydride/Branched Diamine Ratio on the Architecture and Room Temperature Healing Behavior of Polyetherimides

    Susa, A., Bose, R., Grande, A., van der Zwaag, S. & Garcia Espallargas, S., 10 Nov 2016, In : ACS Applied Materials and Interfaces. 8, 49, p. 34068−34079 12 p., 10433.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Self-Healing Polymer Networks Based on Reversible Michael Addition Reactions

    Kuhl, N., Geitner, R., Bose, R. K., Bode, S., Dietzek, B., Schmitt, M., Popp, J., Garcia, S. J., van der Zwaag, S., Schubert, U. S. & Hager, M. D., 1 Nov 2016, In : Macromolecular Chemistry and Physics. 217, 22, p. 2541-2550 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. On the use of non-MPB lead zirconium titanate (PZT) granules for piezoelectric ceramic–polymer sensorial composites

    Shaji Karapuzha, A., Kunnamkuzhakkal James, N., van der Zwaag, S. & Groen, W. A., 1 Sep 2016, In : Journal of Materials Science: Materials in Electronics. 27, 9, p. 9683-9689 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Exploring the piezoelectric performance of PZT particulate-epoxy composites loaded in shear

    Loock, F. V., Deutz, D. B., Zwaag, S. V. D. & Groen, W. A., 19 Jul 2016, In : Smart Materials and Structures. 25, 8, 085039.

    Research output: Contribution to journalArticleScientificpeer-review

  85. The effect of filler parameters on the healing of thermal conductivity and mechanical properties of a thermal interface material based on a self-healable organic-inorganic polymer matrix

    Zhong, N., Garcia, S. J. & Van Der Zwaag, S., 15 Jul 2016, In : Smart Materials and Structures. 25, 8, 084016.

    Research output: Contribution to journalArticleScientificpeer-review

  86. The scratch and abrasive wear behaviour of a tempered martensitic construction steel and its dual phase variants

    Xu, X., van der Zwaag, S. & Xu, W., 15 Jul 2016, In : Wear. 358-359, p. 80-88 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  87. A 2D analysis of the competition between the equiaxed ferritic and the bainitic morphology based on a Gibbs energy balance approach

    Yang, Z., Xu, W., Yang, Z., Zhang, C. & van der Zwaag, S., 2016, In : Acta Materialia. 105, February, p. 317-327 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Adhesion and long-term barrier restoration of intrinsic self-healing hybrid sol-gel coatings

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, In : ACS Applied Materials and Interfaces. 8, 6, p. 4126-4136 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Alloy by design - A materials genome approach to advanced high strength stainless steels for low and high temperature applications

    Lu, Q., Xu, W. & van der Zwaag, S., 2016, Proceedings of the 7th international conference on creep, fatigue and creep-fatigue interaction, CF-7. s.n. (ed.). s.l.: s.n., p. 691-698 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. An Overview of the Cyclic Partial Austenite-Ferrite Transformation Concept and Its Potential

    Chen, H. & van der Zwaag, S., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 6, p. 2720–2729 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Analysis of the state of poling of lead zirconate titanate (PZT) particles in a Zn-ionomer composite

    James, NK., Comyn, T., Hall, D., Daniel, L., Kleppe, A., van der Zwaag, S. & Groen, WA., 2016, In : Ferroelectrics. 493, 1, p. 139-150 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Analysis of the structure and resulting mechanical properties of aluminium extrusions containing a charge weld interface

    den Bakker, AJ., Katgerman, L. & van der Zwaag, S., 2016, In : Journal of Materials Processing Technology. 229, March, p. 9-21 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Assessment of healed scratches in intrinsic healing coatings by AC/DC/AC accelerated electrochemical procedure

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, In : Surface and Coatings Technology. p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Autonomous filling of grain-boundary cavities during creep loading in Fe-Mo alloys

    Zhang, S., Fang, H., Gramsma, M. E., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Brück, E., van der Zwaag, S., van Dijk, N. H. & More Authors, 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 10, p. 4831-4844

    Research output: Contribution to journalArticleScientificpeer-review

  95. Characterization of self-healing polymers - From healing tests to the mechanism

    Bode, S., Enke, M., Hernandez Santana, M., Bose, RK., Grande, AM., Garcia Espallargas, SJ., van der Zwaag, S., Schubert, US. & Hager, MD., 2016, Advances in Polymer Science. Dordrecht: Springer, Vol. 273. p. 113-142

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  96. Computational modeling of structure formation during dielectrophoresis in particulate composites

    Gutierrez, MA., Khanbareh, H. & van der Zwaag, S., 2016, In : Computational Materials Science. 112, February, p. 139-146 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Demonstrating the self-healing behaviour of some selected ceramics under combustion chamber conditions

    Farle, A., Boatemaa, L., Shen, L., Gövert, S., Kok, J. B. W., Bosch, M., Yoshioka, S., Van Der Zwaag, S. & Sloof, W. G., 2016, In : Smart Materials and Structures. 25, 8, 10 p., 084019.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 Next

ID: 142717