1. 2019
  2. Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel

    Shen, C., Wang, C., Wei, X., Li, Y., van der Zwaag, S. & Xu, W., 15 Oct 2019, In : Acta Materialia. 179, p. 201-214 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Direct TEM observation of α/γ interface migration during cyclic partial phase transformations at intercritical temperatures in an Fe-0.1C −0.5Mn alloy

    Nutter, J., Farahani, H., Rainforth, W. M. & van der Zwaag, S., 1 Oct 2019, In : Acta Materialia. 178, p. 68-78 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Damage evolution in a self-healing air plasma sprayed thermal barrier coating containing self-shielding MoSi 2 particles

    Chen, Y., Zhang, X., van der Zwaag, S., Sloof, W. G. & Xiao, P., 1 Aug 2019, In : Journal of the American Ceramic Society. 102, 8, p. 4899-4910 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. 3D-printed Perforated Trailing Edges for Broadband Noise Abatement

    Rubio Carpio, A., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, 25th AIAA/CEAS Aeroacoustics Conference: 20-23 May 2019 Delft, The Netherlands. AIAA, 13 p. AIAA 2019-2458

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. A deconvolution protocol of the mechanical relaxation spectrum to identify and quantify individual polymer feature contributions to self-healing

    Montano, V., Picken, S. J., Van Der Zwaag, S. & Garcia, S. J., 2019, In : Physical Chemistry Chemical Physics. 21, 19, p. 10171-10184 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 2, p. 533-545 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Computational investigation of porosity effects on fracture behavior of thermal barrier coatings

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 2019, In : Ceramics International. 45, 16, p. 20518-20527 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Determination of mode switching in cyclic partial phase transformation in Fe-0.1C-xMn alloys as a function of the Mn concentration

    Farahani, H., Xu, W. & van der Zwaag, S., 2019, In : JOM. 71, 4, p. 1313 - 1321

    Research output: Contribution to journalArticleScientificpeer-review

  10. Experimental characterization of the turbulent boundary layer over a porous trailing edge for noise abatement

    Rubio Carpio, A., Merino Martínez, R., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, In : Journal of Sound and Vibration. 443, p. 537-558 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Flexible Lead-Free Piezoelectric Composite Materials for Energy Harvesting Applications

    Stuber, V. L., Deutz, D. B., Bennett, J., Cannel, D., de Leeuw, D. M., van der Zwaag, S. & Groen, P., 2019, In : Energy Technology. 7, 1, p. 177-185 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. In situ high-temperature EBSD and 3D phase field studies of the austenite-ferrite transformation in a medium Mn steel

    Farahani, H., Zijlstra, G., Mecozzi, M. G., Ocelík, V., De Hosson, J. T. M. & Van Der Zwaag, S., 2019, In : Microscopy and Microanalysis. 25, 3, p. 639-655

    Research output: Contribution to journalArticleScientificpeer-review

  13. Kinetics of zircon formation in yttria partially stabilized zirconia as a result of oxidation of embedded molybdenum disilicide

    Nozahic, F., Carabat, A. L., Mao, W., Monceau, D., Estournes, C., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2019, In : Acta Materialia. 174, p. 206-216

    Research output: Contribution to journalArticleScientificpeer-review

  14. Point contact abrasive wear behavior of MAX phase materials

    Qu, L., Bei, G., Nijemeisland, M., Cao, D., van der Zwaag, S. & Sloof, W. G., 2019, (Accepted/In press) In : Ceramics International.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Self healing of creep damage in iron-based alloys by supersaturated tungsten

    Fang, H., Szymanski, N., Versteylen, C. D., Cloetens, P., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Balachandran, S., Herbig, M., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2019, In : Acta Materialia. 166, p. 531-542

    Research output: Contribution to journalArticleScientificpeer-review

  16. Synthesis, crystal structure, microstructure and mechanical properties of (Ti1-xZrx)3SiC2 MAX phase solid solutions

    Qu, L., Bei, G., Stelzer, B., Rueß, H., Schneider, J. M., Cao, D., van der Zwaag, S. & Sloof, W. G., 2019, In : Ceramics International. 45, 1, p. 1400-1408

    Research output: Contribution to journalArticleScientificpeer-review

  17. Ultra-high temperature ablation behavior of MoAlB ceramics under an oxyacetylene flame

    Bei, G., van der Zwaag, S., Kota, S., Barsoum, M. W. & Sloof, W. G., 2019, In : Journal of the European Ceramic Society. 39, 6, p. 2010-2017

    Research output: Contribution to journalArticleScientificpeer-review

  18. 2018
  19. Modelling the fracture behaviour of thermal barrier coatings containing healing particles

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 5 Nov 2018, In : Materials and Design. 157, p. 75-86 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Identifying the Role of Primary and Secondary Interactions on the Mechanical Properties and Healing of Densely Branched Polyimides

    Susa, A., Mordvinkin, A., Saalwächter, K., Van Der Zwaag, S. & Garcia, S. J., 15 Oct 2018, In : Macromolecules. 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. A Computational Design Study of Self-healing Creep Resistant Steels

    Fu, Y., van Dijk, N. & van der Zwaag, S., 12 Oct 2018. 1 p.

    Research output: Contribution to conferencePosterScientific

Previous 1 2 3 4 5 6 7 8 ...39 Next

ID: 142717