1. 2019
  2. Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel

    Shen, C., Wang, C., Wei, X., Li, Y., van der Zwaag, S. & Xu, W., 15 Oct 2019, In : Acta Materialia. 179, p. 201-214 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Direct TEM observation of α/γ interface migration during cyclic partial phase transformations at intercritical temperatures in an Fe-0.1C −0.5Mn alloy

    Nutter, J., Farahani, H., Rainforth, W. M. & van der Zwaag, S., 1 Oct 2019, In : Acta Materialia. 178, p. 68-78 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Damage evolution in a self-healing air plasma sprayed thermal barrier coating containing self-shielding MoSi 2 particles

    Chen, Y., Zhang, X., van der Zwaag, S., Sloof, W. G. & Xiao, P., 1 Aug 2019, In : Journal of the American Ceramic Society. 102, 8, p. 4899-4910 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. 3D-printed Perforated Trailing Edges for Broadband Noise Abatement

    Rubio Carpio, A., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, 25th AIAA/CEAS Aeroacoustics Conference: 20-23 May 2019 Delft, The Netherlands. AIAA, 13 p. AIAA 2019-2458

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. A deconvolution protocol of the mechanical relaxation spectrum to identify and quantify individual polymer feature contributions to self-healing

    Montano, V., Picken, S. J., Van Der Zwaag, S. & Garcia, S. J., 2019, In : Physical Chemistry Chemical Physics. 21, 19, p. 10171-10184 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 2, p. 533-545 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Computational investigation of porosity effects on fracture behavior of thermal barrier coatings

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 2019, In : Ceramics International. 45, 16, p. 20518-20527 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Determination of mode switching in cyclic partial phase transformation in Fe-0.1C-xMn alloys as a function of the Mn concentration

    Farahani, H., Xu, W. & van der Zwaag, S., 2019, In : JOM. 71, 4, p. 1313 - 1321

    Research output: Contribution to journalArticleScientificpeer-review

  10. Experimental characterization of the turbulent boundary layer over a porous trailing edge for noise abatement

    Rubio Carpio, A., Merino Martínez, R., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, In : Journal of Sound and Vibration. 443, p. 537-558 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Flexible Lead-Free Piezoelectric Composite Materials for Energy Harvesting Applications

    Stuber, V. L., Deutz, D. B., Bennett, J., Cannel, D., de Leeuw, D. M., van der Zwaag, S. & Groen, P., 2019, In : Energy Technology. 7, 1, p. 177-185 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. In situ high-temperature EBSD and 3D phase field studies of the austenite-ferrite transformation in a medium Mn steel

    Farahani, H., Zijlstra, G., Mecozzi, M. G., Ocelík, V., De Hosson, J. T. M. & Van Der Zwaag, S., 2019, In : Microscopy and Microanalysis. 25, 3, p. 639-655

    Research output: Contribution to journalArticleScientificpeer-review

  13. Kinetics of zircon formation in yttria partially stabilized zirconia as a result of oxidation of embedded molybdenum disilicide

    Nozahic, F., Carabat, A. L., Mao, W., Monceau, D., Estournes, C., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2019, In : Acta Materialia. 174, p. 206-216

    Research output: Contribution to journalArticleScientificpeer-review

  14. Point contact abrasive wear behavior of MAX phase materials

    Qu, L., Bei, G., Nijemeisland, M., Cao, D., van der Zwaag, S. & Sloof, W. G., 2019, (Accepted/In press) In : Ceramics International.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Self healing of creep damage in iron-based alloys by supersaturated tungsten

    Fang, H., Szymanski, N., Versteylen, C. D., Cloetens, P., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Balachandran, S., Herbig, M., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2019, In : Acta Materialia. 166, p. 531-542

    Research output: Contribution to journalArticleScientificpeer-review

  16. Synthesis, crystal structure, microstructure and mechanical properties of (Ti1-xZrx)3SiC2 MAX phase solid solutions

    Qu, L., Bei, G., Stelzer, B., Rueß, H., Schneider, J. M., Cao, D., van der Zwaag, S. & Sloof, W. G., 2019, In : Ceramics International. 45, 1, p. 1400-1408

    Research output: Contribution to journalArticleScientificpeer-review

  17. Ultra-high temperature ablation behavior of MoAlB ceramics under an oxyacetylene flame

    Bei, G., van der Zwaag, S., Kota, S., Barsoum, M. W. & Sloof, W. G., 2019, In : Journal of the European Ceramic Society. 39, 6, p. 2010-2017

    Research output: Contribution to journalArticleScientificpeer-review

  18. 2018
  19. Modelling the fracture behaviour of thermal barrier coatings containing healing particles

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 5 Nov 2018, In : Materials and Design. 157, p. 75-86 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Identifying the Role of Primary and Secondary Interactions on the Mechanical Properties and Healing of Densely Branched Polyimides

    Susa, A., Mordvinkin, A., Saalwächter, K., Van Der Zwaag, S. & Garcia, S. J., 15 Oct 2018, In : Macromolecules. 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. A Computational Design Study of Self-healing Creep Resistant Steels

    Fu, Y., van Dijk, N. & van der Zwaag, S., 12 Oct 2018. 1 p.

    Research output: Contribution to conferencePosterScientific

  22. Routes to Make Natural Rubber Heal: A Review

    Hernández Santana, M., den Brabander, M., García, S. & van der Zwaag, S., 2 Oct 2018, In : Polymer Reviews. 58, 4, p. 585-609 25 p.

    Research output: Contribution to journalReview articleScientificpeer-review

  23. Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy

    Dong, H., Chen, H., Wang, W., Zhang, Y., Miyamoto, G., Furuhara, T., Zhang, C., Yang, Z. & van der Zwaag, S., 1 Oct 2018, In : Acta Materialia. 158, p. 167-179 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. On the Relationship between the Chromium Concentration, the Z-Phase Formation and the Creep Strength of Ferritic-Martensitic Steels

    Yu, H., Xu, W. & van der Zwaag, S., 1 Oct 2018, In : Steel Research International. 89, 10, 8 p., 1800177.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Self-Healing Materials are Coming of Age

    Leeuwenburgh, S. C. G., De Belie, N. & van der Zwaag, S., 7 Sep 2018, In : Advanced Materials Interfaces. 5, 17, 3 p., 1800736.

    Research output: Contribution to journalEditorialScientific

  26. A translation of the structure of mussel byssal threads into synthetic materials by the utilization of histidine-rich block copolymers

    Enke, M., Bose, R. K., Zechel, S., Vitz, J., Deubler, R., Garcia, S. J., Van Der Zwaag, S., Schacher, F. H., Hager, M. D. & Schubert, U. S., 7 Jul 2018, In : Polymer Chemistry. 9, 25, p. 3543-3551 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Effect of C and N and their absence on the kinetics of austenite-ferrite phase transformations in Fe-0.5Mn alloy

    Farahani, H., Zurob, H., Hutchinson, C. R. & van der Zwaag, S., 15 May 2018, In : Acta Materialia. 150, p. 224-235 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Analysis and experimental validation of the figure of merit for piezoelectric energy harvesters

    Deutz, D. B., Pascoe, J. A., Schelen, B., Van Der Zwaag, S., De Leeuw, D. M. & Groen, P., 1 May 2018, In : Materials Horizons. 5, 3, p. 444-453 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Self-Healing Phenomena in Metals

    van Dijk, N. & van der Zwaag, S., 1 Jan 2018, In : Advanced Materials Interfaces. 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. A Novel Approach for Controlling the Band Formation in Medium Mn Steels

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 6, p. 1998–2010 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. A cohesive-zone crack healing model for self-healing materials

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2018, In : International Journal of Solids and Structures. 134, p. 249-263

    Research output: Contribution to journalArticleScientificpeer-review

  32. An in-situ LSCM study on bainite Formation in a Fe-0.2C-1.5Mn-2.0Cr Alloy

    Sainis, S., Farahani, H., Gamsjäger, E. & van der Zwaag, S., 2018, In : Metals. 8, 7, 22 p., 498.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Analysis of the grain size evolution for ferrite formation in Fe-C-Mn steels using a 3D model under a mixed-mode interface condition

    Fang, H., Mecozzi, M. G., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 1, p. 41-53

    Research output: Contribution to journalArticleScientificpeer-review

  34. Autonomous high-temperature healing of surface cracks in Al2O3 containing Ti2AlC particles

    Boatemaa, L., Bosch, M., Farle, A. S., Bei, G. P., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the American Ceramic Society. 101, 12, p. 5684-5693

    Research output: Contribution to journalArticleScientificpeer-review

  35. In Situ 3D Neutron Depolarization Study of the Transformation Kinetics and Grain Size Evolution During Cyclic Partial Austenite-Ferrite Phase Transformations in Fe-C-Mn Steels

    Fang, H., van der Zwaag, S. & van Dijk, N. H., 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. In-situ EBSD observations of moving austenite-ferrite interfaces during intercritical annealing

    van der Zwaag, S., Farahani, H., Zijlstra, G., Mecozzi, P., Ocelik, V. & de Hosson, J., 2018. 1 p.

    Research output: Contribution to conferencePosterScientific

  37. Predicting the cooperative effect of Mn–Si and Mn–Mo on the incomplete bainite formation in quaternary Fe–C alloys

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Philosophical Magazine Letters. 98, 4, p. 161-171

    Research output: Contribution to journalArticleScientificpeer-review

  38. Protecting the MoSi2 healing particles for thermal barrier coatings using a sol-gel produced Al2O3 coating

    Carabat, A. L., Meijerink, M. J., Brouwer, J. C., Kelder, E. M., van Ommen, J. R., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the European Ceramic Society. 38, 7, p. 2728-2734

    Research output: Contribution to journalArticleScientificpeer-review

  39. Self-healing of Al2O3 containing Ti microparticles

    Boatemaa, L., van der Zwaag, S. & Sloof, W. G., 2018, In : Ceramics International. 44, 10, p. 11116-11126

    Research output: Contribution to journalArticleScientificpeer-review

  40. Self-healing thermal barrier coating systems fabricated by spark plasma sintering

    Nozahic, F., Estournès, C., Carabat, A. L., Sloof, W. G., van der Zwaag, S. & Monceau, D., 2018, In : Materials & Design. 143, p. 204-213

    Research output: Contribution to journalArticleScientificpeer-review

  41. Special Issue: Self‐Healing Materials

    Leeuwenburgh, S. C. G., De Belie, N. & van der Zwaag, S., 2018, In : Advanced Materials Interfaces. 5, 17

    Research output: Contribution to journalSpecial issueScientific

  42. Synergetic active corrosion protection of AA2024-T3 by 2D- anionic and 3D-cationic nanocontainers loaded with Ce and mercaptobenzothiazole

    Abdolahzadeh, M., Tedim, J., Zheludkevich, M., van der Zwaag, S. & Garcia, S. J., 2018, In : Corrosion Science: the journal on environmental degradation of materials and its control. 135, p. 35-45

    Research output: Contribution to journalArticleScientificpeer-review

  43. The effect of the TiC particle size on the preferred oxidation temperature for self-healing of oxide ceramic matrix materials

    Boatemaa, L., Brouwer, H., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of Materials Science. 53, 8, p. 5973-5986

    Research output: Contribution to journalArticleScientificpeer-review

  44. Thermo – mechanical properties of SPS produced self-healing thermal barrier coatings containing pure and alloyed MoSi2 particles

    Kulczyk-Malecka, J., Zhang, X., Carr, J., Nozahic, F., Estournès, C., Monceau, D., Carabat, A. L., Sloof, W. G., van der Zwaag, S., Withers, P. J. & Xiao, P., 2018, In : Journal of the European Ceramic Society. 38, 12, p. 4268-4275

    Research output: Contribution to journalArticleScientificpeer-review

  45. 2017
  46. A New Approach Toward Metal-Free Self-Healing Ionomers Based on Phosphate and Methacrylate Containing Copolymers

    Dahlke, J., Bose, R. K., Zechel, S., Garcia, S. J., van der Zwaag, S., Hager, M. D. & Schubert, U. S., 1 Dec 2017, In : Macromolecular Chemistry and Physics. 218, 23, 9 p., 1700340.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Effect of the polymer structure on the viscoelastic and interfacial healing behaviour of poly(urea-urethane) networks containing aromatic disulphides

    Grande, A. M., Martin, R., Odriozola, I., van der Zwaag, S. & Garcia, S. J., 1 Dec 2017, In : European Polymer Journal. 97, p. 120-128 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. The Compositional Dependence of the Microstructure and Properties of CMSX-4 Superalloys

    Yu, H., Xu, W. & van der Zwaag, S., 14 Nov 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Healing of a glass fibre reinforced composite with a disulphide containing organic-inorganic epoxy matrix

    Post, W., Cohades, A., Michaud, V., van der Zwaag, S. & Garcia, S. J., 10 Nov 2017, In : Composites Science and Technology. 152, p. 85-93 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Correction to: Imaging the Molecular Motions of Autonomous Repair in a Self-Healing Polymer (Advanced Materials, (2017), 29, 26, (1701017), 10.1002/adma.201701017)

    van der Kooij, H. M., Susa, A., García, S. J., van der Zwaag, S. & Sprakel, J., 6 Nov 2017, In : Advanced Materials. 29, 41, 1770296.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  51. Non-destructive monitoring of delamination healing of a CFRP composite with a thermoplastic ionomer interlayer

    Post, W., Kersemans, M., Solodov, I., Van Den Abeele, K., García, S. J. & van der Zwaag, S., 1 Oct 2017, In : Composites Part A: Applied Science and Manufacturing. 101, p. 243-253 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Setup for EMI Shielding Effectiveness Tests of Electrically Conductive Polymer Composites at Frequencies up to 3.0 GHz

    Vieira Valente, R. D., De Ruijter, C., Vlasveld, D., Van Der Zwaag, S. & Groen, P., 23 Aug 2017, In : IEEE Access. 5, p. 16665-16675 11 p., 8015104.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Abrasion resistance characterization of low alloy construction steels: A comparison between three different scratch test protocols

    Xu, X., van der Zwaag, S. & Xu, W., 15 Aug 2017, In : Wear. 384-385, p. 106-113 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Large area and flexible micro-porous piezoelectric materials for soft robotic skin

    Khanbareh, H., de Boom, K., Schelen, J. B. J., Scharff, R. B. N., Wang, C., van der Zwaag, S. & Groen, P., 15 Aug 2017, In : Sensors and Actuators A: Physical: an international journal devoted to research and development of physical and chemical transducers. 263, p. 554-562 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Contributions of hard and soft blocks in the self-healing of metal-ligand-containing block copolymers

    Bose, R. K., Enke, M., Grande, A. M., Zechel, S., Schacher, F. H., Hager, M. D., Garcia, S. J., Schubert, U. S. & van der Zwaag, S., 1 Aug 2017, In : European Polymer Journal. 93, p. 417-427 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. On the 650 °C thermostability of 9–12Cr heat resistant steels containing different precipitates

    Wang, H., Yan, W., van der Zwaag, S., Shi, Q., Wang, W., Yang, K. & Shan, Y., 1 Aug 2017, In : Acta Materialia. 134, p. 143-154 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Highly sensitive piezo particulate-polymer foam composites for robotic skin application

    Khanbareh, H., de Boom, K., van der Zwaag, S. & Groen, W. A., 27 Jul 2017, In : Ferroelectrics. 515, 1, p. 25-33 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Poling piezoelectric (K,Na,Li)NbO3-polydimethylsiloxane composites

    Deutz, D. B., Mascarenhas, N. T., van der Zwaag, S. & Groen, W. A., 27 Jul 2017, In : Ferroelectrics. 515, 1, p. 68-74 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Determination of the intrinsic α/γ interface mobility during massive transformations in interstitial free Fe-X alloys

    Zhu, J., Luo, H., Yang, Z., Zhang, C., van der Zwaag, S. & Chen, H., 1 Jul 2017, In : Acta Materialia. 133, p. 258-268 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Reply to Comment on "monitoring Network and Interfacial Healing Processes by Broadband Dielectric Spectroscopy: A Case Study on Natural Rubber"

    Hernandez Santana, M., Grande, A. M., Van Der Zwaag, S. & García, S. J., 3 May 2017, In : ACS Applied Materials and Interfaces. 9, 17, p. 14552-14554 3 p.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  61. Linking Surface Precipitation in Fe-Au Alloys to Its Self-healing Potential During Creep Loading

    Sun, W. W., Fang, H., van Dijk, N. H., van der Zwaag, S. & Hutchinson, C. R., 27 Feb 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 5, p. 2109–2114 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Effect of the piezoelectric ceramic filler dielectric constant on the piezoelectric properties of PZT-epoxy composites

    Khaliq, J., Deutz, D. B., Frescas, J. A. C., Vollenberg, P., Hoeks, T., van der Zwaag, S. & Groen, P., 1 Feb 2017, In : Ceramics International. 43, 2, p. 2774-2779 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel−An in-situ X-ray diffraction study

    Wiessner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 13 Jan 2017, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 682, p. 117-125 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. Broadband Trailing-Edge Noise Reduction Using Permeable Metal Foams

    Merino Martinez, R., Rubio Carpio, A., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2017, Proceedings of the 46th International Congress and Exposition on Noise Control Engineering Taming Noise and Moving Quiet: Taming Noise and Moving Quiet, 27-30 Aug 2017 Hong Kong, China. p. 4373-4383

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Crack healing behaviour of Cr2AlC MAX phase studied by X-ray tomography

    Pei, R., McDonald, S. A., Shen, L., van der Zwaag, S., Sloof, W. G., Withers, P. J. & Mummery, P. M., 2017, In : Journal of the European Ceramic Society. 37, 2, p. 441-450

    Research output: Contribution to journalArticleScientificpeer-review

  66. Delamination healing in GFRP interlayers by localized induction heating

    Jang, S., Post, W., van der Zwaag, S. & Garcia, S. J., 2017. 1 p.

    Research output: Contribution to conferencePosterScientific

  67. Effect of graphene content on the restoration of mechanical, electrical and thermal functionalities of a self-healing natural rubber

    Hernandez Santana, M., Mar Bernal, M., Grande, A., Zhong, N., van der Zwaag, S. & Garcia, S. J., 2017, In : Smart Materials and Structures. 26, 8, 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Flexible Piezoelectric Touch Sensor by Alignment of Lead-Free Alkaline Niobate Microcubes in PDMS

    Deutz, D. B., Mascarenhas, N. T., Schelen, J. B. J., de Leeuw, D. M., van der Zwaag, S. & Groen, P., 2017, In : Advanced Functional Materials. 27, 24, 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Imaging the Molecular Motions of Autonomous Repair in a Self-Healing Polymer

    van der Kooij, H. M., Susa, A., García, S. J., van der Zwaag, S. & Sprakel, J., 2017, In : Advanced Materials. 29, 26, 6 p., 1701017.

    Research output: Contribution to journalArticleScientificpeer-review

  70. In-situ poling and structurization of piezoelectric particulate composites

    Khanbareh, H., van der Zwaag, S. & Groen, P., 2017, In : Journal of Intelligent Material Systems and Structures. 28, 8, p. 2467-2472

    Research output: Contribution to journalArticleScientificpeer-review

  71. On the Cobalt: Tungsten/Chromium balance in martensitic creep resistant steels

    Yu, H., Xu, W. & van der Zwaag, S., 2017, In : Steel Research International. 89, 2, 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Oxidation and self-healing behaviour of spark plasma sintered Ta2AlC

    Farle, A. S. M., Stikkelman, J., van der Zwaag, S. & Sloof, W. G., 2017, In : Journal of the European Ceramic Society. 37, 5, p. 1969-1974

    Research output: Contribution to journalArticleScientificpeer-review

  73. Response to Comment on “Turning Vulcanized Natural Rubber into a Self-Healing Polymer: Effect of the Disulfide/Polysulfide Ratio”

    Hernandez Santana, M., Grande, A. & van der Zwaag, S., 2017, (Accepted/In press) In : ACS Sustainable Chemistry and Engineering. 5, 12, p. 11127-11129 3 p.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  74. Self-Healing Glass Fiber Reinforced Polymer Composites Based on Montmorillonite Reinforced Compartmented Alginate Fibers

    Post, W., Jeoffroy, E., Garcia, S. J. & van der Zwaag, S., 2017, In : Polymer Composites. 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. 2016
  76. Correlating the abrasion resistance of low alloy steels to the standard mechanical properties: A statistical analysis over a larger data set

    Xu, X., Ederveen, F. H., van der Zwaag, S. & Xu, W., 15 Dec 2016, In : Wear. 368-369, p. 92-100 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Autonomous filling of creep cavities in Fe-Au alloys studied by synchrotron X-ray nano-tomography

    Fang, H., Versteylen, C. D., Zhang, S., Yang, Y., Cloetens, P., Ngan-Tillard, D., Brück, E., van der Zwaag, S. & van Dijk, N. H., 1 Dec 2016, In : Acta Materialia. 121, p. 352-364 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. A metal salt dependent self-healing response in supramolecular block copolymers

    Enke, M., Bose, R. K., Bode, S., Vitz, J., Schacher, F. H., Garcia Espallargas, S. J., Van Der Zwaag, S., Hager, M. D. & Schubert, U. S., 22 Nov 2016, In : Macromolecules. 49, 22, p. 8418-8429 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Charting the 'composition-strength' space for novel austenitic, martensitic and ferritic creep resistant steels

    Lu, Q., van der Zwaag, S. & Xu, W., 14 Nov 2016, (Accepted/In press) In : Journal of Materials Science & Technology: an international journal in the field of materials science. 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Structure, dielectric and piezoelectric properties of donor doped PZT ceramics across the phase diagram

    Shaji Karapuzha, A., Kunnamkuzhakkal James, N., Khanbareh, H., van der Zwaag, S. & Groen, W. A., 13 Nov 2016, In : Ferroelectrics. 504, 1, p. 160-171 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Effect of the Dianhydride/Branched Diamine Ratio on the Architecture and Room Temperature Healing Behavior of Polyetherimides

    Susa, A., Bose, R., Grande, A., van der Zwaag, S. & Garcia Espallargas, S., 10 Nov 2016, In : ACS Applied Materials and Interfaces. 8, 49, p. 34068−34079 12 p., 10433.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Self-Healing Polymer Networks Based on Reversible Michael Addition Reactions

    Kuhl, N., Geitner, R., Bose, R. K., Bode, S., Dietzek, B., Schmitt, M., Popp, J., Garcia, S. J., van der Zwaag, S., Schubert, U. S. & Hager, M. D., 1 Nov 2016, In : Macromolecular Chemistry and Physics. 217, 22, p. 2541-2550 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. On the use of non-MPB lead zirconium titanate (PZT) granules for piezoelectric ceramic–polymer sensorial composites

    Shaji Karapuzha, A., Kunnamkuzhakkal James, N., van der Zwaag, S. & Groen, W. A., 1 Sep 2016, In : Journal of Materials Science: Materials in Electronics. 27, 9, p. 9683-9689 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Exploring the piezoelectric performance of PZT particulate-epoxy composites loaded in shear

    Loock, F. V., Deutz, D. B., Zwaag, S. V. D. & Groen, W. A., 19 Jul 2016, In : Smart Materials and Structures. 25, 8, 085039.

    Research output: Contribution to journalArticleScientificpeer-review

  85. The effect of filler parameters on the healing of thermal conductivity and mechanical properties of a thermal interface material based on a self-healable organic-inorganic polymer matrix

    Zhong, N., Garcia, S. J. & Van Der Zwaag, S., 15 Jul 2016, In : Smart Materials and Structures. 25, 8, 084016.

    Research output: Contribution to journalArticleScientificpeer-review

  86. The scratch and abrasive wear behaviour of a tempered martensitic construction steel and its dual phase variants

    Xu, X., van der Zwaag, S. & Xu, W., 15 Jul 2016, In : Wear. 358-359, p. 80-88 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  87. A 2D analysis of the competition between the equiaxed ferritic and the bainitic morphology based on a Gibbs energy balance approach

    Yang, Z., Xu, W., Yang, Z., Zhang, C. & van der Zwaag, S., 2016, In : Acta Materialia. 105, February, p. 317-327 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Adhesion and long-term barrier restoration of intrinsic self-healing hybrid sol-gel coatings

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, In : ACS Applied Materials and Interfaces. 8, 6, p. 4126-4136 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Alloy by design - A materials genome approach to advanced high strength stainless steels for low and high temperature applications

    Lu, Q., Xu, W. & van der Zwaag, S., 2016, Proceedings of the 7th international conference on creep, fatigue and creep-fatigue interaction, CF-7. s.n. (ed.). s.l.: s.n., p. 691-698 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. An Overview of the Cyclic Partial Austenite-Ferrite Transformation Concept and Its Potential

    Chen, H. & van der Zwaag, S., 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48, 6, p. 2720–2729 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Analysis of the state of poling of lead zirconate titanate (PZT) particles in a Zn-ionomer composite

    James, NK., Comyn, T., Hall, D., Daniel, L., Kleppe, A., van der Zwaag, S. & Groen, WA., 2016, In : Ferroelectrics. 493, 1, p. 139-150 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Analysis of the structure and resulting mechanical properties of aluminium extrusions containing a charge weld interface

    den Bakker, AJ., Katgerman, L. & van der Zwaag, S., 2016, In : Journal of Materials Processing Technology. 229, March, p. 9-21 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Assessment of healed scratches in intrinsic healing coatings by AC/DC/AC accelerated electrochemical procedure

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, In : Surface and Coatings Technology. p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Autonomous filling of grain-boundary cavities during creep loading in Fe-Mo alloys

    Zhang, S., Fang, H., Gramsma, M. E., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Brück, E., van der Zwaag, S., van Dijk, N. H. & More Authors, 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 10, p. 4831-4844

    Research output: Contribution to journalArticleScientificpeer-review

  95. Characterization of self-healing polymers - From healing tests to the mechanism

    Bode, S., Enke, M., Hernandez Santana, M., Bose, RK., Grande, AM., Garcia Espallargas, SJ., van der Zwaag, S., Schubert, US. & Hager, MD., 2016, Advances in Polymer Science. Dordrecht: Springer, Vol. 273. p. 113-142

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  96. Computational modeling of structure formation during dielectrophoresis in particulate composites

    Gutierrez, MA., Khanbareh, H. & van der Zwaag, S., 2016, In : Computational Materials Science. 112, February, p. 139-146 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Demonstrating the self-healing behaviour of some selected ceramics under combustion chamber conditions

    Farle, A., Boatemaa, L., Shen, L., Gövert, S., Kok, J. B. W., Bosch, M., Yoshioka, S., Van Der Zwaag, S. & Sloof, W. G., 2016, In : Smart Materials and Structures. 25, 8, 10 p., 084019.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Effect of curing on the mechanical and healing behaviour of a hybrid dual network: A time resolved evaluation

    Abdolah Zadeh, M., Grande, A. M., Van Der Zwaag, S. & Garcia, S. J., 2016, In : RSC Advances. 6, 94, p. 91806-91814 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Enhancing energy harvesting potential of (K,Na,Li)NbO3-epoxy composites via Li substitution

    Deutz, D. B., Mascarenhas, N. T., van der Zwaag, S. & Groen, W. A., 2016, In : Journal of the American Ceramic Society. 100, 3, p. 1108–1117 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Healing of Early Stage Fatigue Damage in Ionomer/Fe3O4 Nanoparticle Composites

    Post, W., Bose, R., Garcia Espallargas, S. & van der Zwaag, S., 2016, In : Polymers. 8, 12, 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. High Piezoelectric Voltage Coefficient in Structured Lead-Free (K,Na,Li)NbO3 Particulate—Epoxy Composites

    Kunnamkuzhakkal James, N., Deutz, D. B., Bose, R. K., van der Zwaag, S. & Groen, P., 2016, In : Journal of the American Ceramic Society. 99, 12, p. 3957-3963 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. High-throughput design of low-activation, high-strength creep-resistant steels for nuclear-reactor applications

    Lu, Q., van der Zwaag, S. & Xu, W., 2016, In : Journal of Nuclear Materials. 469, February, p. 217-222 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  103. Influence of embedded MoSi2 particles on the high temperature thermal conductivity of SPS produced yttria-stabilised zirconia model thermal barrier coatings

    Kulczyk-Malecka, J., Zhang, X., Carr, J., Carabat, A. L., Sloof, W. G., van der Zwaag, S., Cernuschi, F., Nozahic, F., Monceau, D., Estournès, C., Withers, P. J. & Xiao, P., 2016, In : Surface and Coatings Technology. 308, p. 31-39

    Research output: Contribution to journalArticleScientificpeer-review

  104. Monitoring Network and Interfacial Healing Processes by Broadband Dielectric Spectroscopy: A Case Study on Natural Rubber

    Hernandez Santana, M., Grande, A., van der Zwaag, S. & Garcia Espallargas, S., 2016, In : ACS Applied Materials and Interfaces. p. 10647-10656

    Research output: Contribution to journalArticleScientificpeer-review

  105. On the transition between grain boundary ferrite and bainitic ferrite in Fe-C-Mo and Fe-C-Mn alloys: The bay formation explained

    Chen, H., Yang, Z., Zhang, C., Zhu, K. & van der Zwaag, S., 2016, In : Acta Materialia. 104, February, p. 62-71 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  106. On the use of TiC as high-temperature healing particles in alumina based composites

    Yoshioka, S., Boatemaa, L., Zwaag, S. V. D., Nakao, W. & Sloof, W. G., 2016, In : Journal of the European Ceramic Society. 36, 16, p. 4155-4162

    Research output: Contribution to journalArticleScientificpeer-review

  107. Predicting the Transition between Upper and Lower Bainite via a Gibbs Energy Balance Approach

    Yang, Z., Xu, W., Yang, Z., Zhang, C., Chen, H. & van der Zwaag, S., 2016, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  108. Reducing the erosive wear rate of Cr2AlC MAX phase ceramic by oxidative healing of local impact damage

    Shen, L., Eichner, D., van der Zwaag, S., Leyens, C. & Sloof, W. G., 2016, In : Wear. 358-359, p. 1-6

    Research output: Contribution to journalArticleScientificpeer-review

  109. Repeated crack healing in MAX-phase ceramics revealed by 4D in situ synchrotron X-ray tomographic microscopy

    Sloof, WG., Pei, R., McDonald, SA., Fife, JL., Shen, L., Boatemaa, L., Farle, AS., Yan, K., Zhang, X., van der Zwaag, S., Lee, PD. & Withers, PJ., 2016, In : Scientific Reports. 6, p. 1 - 9 23040 .

    Research output: Contribution to journalArticleScientificpeer-review

  110. Selection of healing agents for autonomous healing of alumina at high temperatures

    Boatemaa, L., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2016, In : Journal of the European Ceramic Society. 36, 16, p. 4141-4145

    Research output: Contribution to journalArticleScientificpeer-review

  111. Self-Healing Corrosion-Protective Sol–Gel Coatings Based on Extrinsic and Intrinsic Healing Approaches

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, Self-healing Materials. Hager, M. D., van der Zwaag, S. & Schubert, U. S. (eds.). Springer, Cham, Vol. 273. p. 1-34 (Advances in Polymer Science).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  112. The Effect of Interfacial Element Partitioning on Ferrite and Bainite Formation

    Chen, H. & van der Zwaag, S., 2016, In : JOM. p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  113. The effect of ferrite-martensite morphology on the scratch and abrasive wear behaviour of a dual phase construction steel

    Xu, X., van der Zwaag, S. & Xu, W., 2016, In : Wear. 348-349, February, p. 148-157 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  114. The effect of martensite volume fraction on the scratch and abrasion resistance of a ferrite-martensite dual phase steel

    Xu, X., van der Zwaag, S. & Xu, W., 2016, In : Wear. 348-349, February, p. 80-88 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  115. Towards self-healing creep resistant steels

    van der Zwaag, S., Zhang, S., Fang, H., Brück, E. & van Dijk, NH., 2016, Proceedings of the 7th international conference on creep, fatigue and creep-fatigue interaction, CF-7. s.n. (ed.). s.l.: s.n., p. 85-90 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  116. Zelfhelende materialen fixen het zelf: Behoren onderhoud en reparatie straks tot het verleden? Door Marga van Zundert

    van der Zwaag, S., Jonkers, HM., van Benthem, R., Dry, C. & White, S., 2016, In : Chemie Magazine. 28, 2, p. 12-15 4 p.

    Research output: Contribution to journalArticleProfessional

  117. 2015
  118. Application of the extended geb model to predict the shape and fraction evolution of ferrite as a function of the transformation temperature for a lean steel containing 1.9 W.T. % Mn

    Yang, Z., Xu, W., Yang, Z. & Van Der Zwaag, S., 1 Jan 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 77-78 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  119. The effect of alloying element partitioning on the interface velocity during the isothermal bainite formation

    Farahani, H., Xu, W. & Van Der Zwaag, S., 1 Jan 2015, p. 925-926. 2 p.

    Research output: Contribution to conferenceAbstractScientific

  120. A conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage

    Farle, AM., Kwakernaak, C., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 1, p. 37-45 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  121. A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels

    Xu, X., van der Zwaag, S. & Xu, W., 2015, In : Wear. 322-323, January, p. 51-60 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  122. A temperature oscillation instrument to determine pyroelectric properties of materials at low frequencies: Towards elimination of lock-in methods

    Khanbareh, H., Schelen, JBJ., van der Zwaag, S. & Groen, WA., 2015, In : Review of Scientific Instruments. 86, 10, p. 105111-1-105111-5

    Research output: Contribution to journalArticleScientificpeer-review

  123. Acylhydrazones as reversible covalent crosslinkers for self-healing polymers

    Kuhl, N., Bode, S., Bose, RK., Vitz, J., Seifert, A., Hoeppener, S., Garcia Espallargas, SJ., Spange, S., van der Zwaag, S., Hager, MD. & Schubert, US., 2015, In : Advanced Functional Materials. 25, 22, p. 3295-3301 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  124. Advanced processing of lead titanate-polyimide composites for high temperature piezoelectric sensing

    Khanbareh, H., Hegde, M., van der Zwaag, S. & Groen, WA., 2015, IEEE International Symposium on Applications of Ferroelectrics (ISAF). Yao, K., Safari, A. & Wang, J. (eds.). s.l.: IEEE Society, p. 265-267 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  125. An analytical approach to model heterogonous recrystallization kinetics taking into account the natural spatial inhomogeneity of deformation

    Luo, H. & van der Zwaag, S., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 1, p. 231-238 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  126. Analysis of the mobility of migrating austenite-ferrite interfaces

    Gamsjager, E., Wiessner, M., Schider, S., Chen, H. & van der Zwaag, S., 2015, In : Philosophical Magazine (London, 2003). 95, 26, p. 2899-2917 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  127. Autonomous repair mechanism of creep damage in Fe-Au and Fe-Au-B-N alloys

    Zhang, S., Kwakernaak, C., Tichelaar, FD., Sloof, WG., Kuzmina, M., Herbig, M., Raabe, D., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 12, p. 5656-5670 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  128. Charting the complete elastic properties of inorganic crystalline compounds

    de Jong, M., Chen, W., Angsten, T., Jain, A., Notestine, R., Gamst, A., Sluiter, MHF., Krishna Ande, C., van der Zwaag, S., Plata, JJ., Toher, C., Curtarolo, S., Ceder, G., Persson, KA. & Asta, M., 2015, In : Scientific Data. 2, p. 150009-1-150009-13

    Research output: Contribution to journalArticleScientificpeer-review

  129. Cohesive-zone modelling of crack nucleation and propagation in particulate composites

    Ponnusami, SA., Turteltaub, SR. & van der Zwaag, S., 2015, In : Engineering Fracture Mechanics. 149, November, p. 170-190 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  130. Compartmented fibres: a local and multiple healing events approach for self healing fibre reinforced composites

    Mookhoek, S., Prajer, M., Post, W., Fischer, H., Garcia Espallargas, SJ. & van der Zwaag, S., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 61-68 308 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  131. Connecting supramolecular bond lifetime and network mobility for scratch healing in poly(butyl acrylate) ionomers containing sodium, zinc and cobalt

    Bose, RK., Hohlbein, N., Garcia Espallargas, SJ., Schmidt, AM. & van der Zwaag, S., 2015, In : Physical Chemistry Chemical Physics. 17, 3, p. 1697-1704 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  132. Correlation between scratch healing and rheological behavior for terpyridine complex based metallopolymers

    Bode, S., Enke, M., Schacher, FH., Garcia Espallargas, SJ., van der Zwaag, S., Hager, MD. & Schubert, US., 2015, In : Journal of Materials Chemistry A. 3, 44, p. 22145-22153 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  133. Corrosion protective sol-gel coatings containing reversible tetra-sulphide groups showing intrinsic healing behaviour

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2015, Self-healing materials - Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 199-206 308 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  134. Creating a protective shell for reactive MoSi2 particles in high-temperature ceramics

    Carabat, AL., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the American Ceramic Society. 98, 8, p. 2609-2616 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  135. Direct and indirect observation of multiple local healing events in successively loaded fibre reinforced polymer model composites using healing agent-filled compartmented fibres

    Prajer, M., Wu, X., Garcia Espallargas, SJ. & van der Zwaag, S., 2015, In : Composites Science and Technology. 106, p. 127-133 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  136. Electrically conductive self-healing polymer composite coatings

    Bailey, BM., Leterrier, Y., Garcia Espallargas, SJ., van der Zwaag, S. & Michaud, V., 2015, In : Progress in Organic Coatings. 85, August, p. 189-198 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  137. Erratum: Modeling and charcaterization of dielectrophoretically structured piezoelectric composites using piezoceramic particle inclusions with high aspect ratios

    van den Ende, DA., Maier, RA., Neer, PLMJ., van der Zwaag, S., Randall, CA. & Groen, WA., 2015, In : Journal of Applied Physics. 117, 9, p. 1-2 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  138. Exploring the option of fatigue life improvement of aluminium AA2024 via dynamic precipitation in the under-aged state

    Mahdavi Shahri, M., Mavrikakis, N., van der Zwaag, S., Alderliesten, RC. & Schut, H., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 79-85 308 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  139. Microstructural and X-ray tomographic analysis of damage in extruded aluminium weld seams

    den Bakker, AJ., Wu, X., Katgerman, L. & van der Zwaag, S., 2015, In : Materials Science and Technology. 31, 1, p. 94-104 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  140. Na beton en asfalt ook hout zelfhelend: Mogelijkheden lijken na tien jaar onderzoek schier oneindig. Door Ad Tissink

    van der Zwaag, S., 2015, In : Cobouw: vakdagblad voor de bouwwereld. 159, 191

    Research output: Contribution to journalArticleProfessional

  141. On the interfacial healing of a supramolecular elastomer

    Grande, AM., Garcia Espallargas, SJ. & van der Zwaag, S., 2015, In : Polymer. 56, January, p. 435-442 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  142. On the use of B-alloyed MoSi2 particles as crack healing agents in yttria stabilized zirconia thermal barrier coatings

    Derelioglu, Z., Carabat, AL., Song, GM., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 16, p. 4507-4511 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  143. Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels

    Goune, M., Danoix, F., Agren, J., Brechet, Y., Hutchinson, CR., Militzer, M., Purdy, G., van der Zwaag, S. & Zurob, H., 2015, In : Materials Science and Engineering R: Reports. 92, p. 1-38 38 p.

    Research output: Contribution to journalArticleScientificpeer-review

  144. Piezoelectric and pyroelectric properties of conductive polyethylene oxide-lead titanate composites

    Khanbareh, H., van der Zwaag, S. & Groen, WA., 2015, In : Smart Materials and Structures. 24, 4, p. 46-51 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  145. Piezoelectric lead zirconium titanate composite touch sensors for integration with flexible OLED technology

    Deutz, DB., Tempelman, E., van der Zwaag, S. & Groen, WA., 2015, Proceedings of the 12th European conference on applications of polar dielectrics, ECAPD-12. s.n. (ed.). s.l.: Taylor & Francis, p. 131-1-131-9 (Ferroelectrics; vol. 480).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  146. Prediction and validation of the austenite phase fraction upon intercritical annealing of medium Mn steels

    Farahani, H., Xu, W. & van der Zwaag, S., 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 11, p. 4978-4985 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  147. Prediction of the abrasion resistance of construction steels on the basis of the subsurface deformation layer in a multi-pass dual-indenter scratch test

    Xu, X., van der Zwaag, S. & Xu, W., 2015, In : Wear. 338-339, September, p. 47-53 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  148. Relationship between the network dynamics, supramolecular relaxation time and healing kinetics of cobalt poly(butyl acrylate) ionomers

    Bose, RK., Hohlbein, N., Garcia Espallargas, SJ., Schmidt, AM. & van der Zwaag, S., 2015, In : Polymer. 69, July, p. 228-232 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  149. Room temperature self healing polyetherimides based on a long chain aliphatic diamine

    Susa, A., van der Zwaag, S. & Garcia Espallargas, SJ., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 19-26 308 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  150. Self healing of creep damage by gold precipitation in iron alloys

    Zhang, S., Kwakernaak, C., Sloof, WG., Brueck, EH., van der Zwaag, S. & van Dijk, NH., 2015, In : Advanced Engineering Materials. 17, 5, p. 598-603 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  151. Self restoring thermal interface materials based on intrinsic healing polymer matrices

    Zhong, N., Lafont, UL., Garcia Espallargas, SJ. & van der Zwaag, S., 2015, Self healing materials : Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 245-252 308 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  152. Self-healing thermally conductive polymer materials

    van der Zwaag, S. & van Zeijl, H., 2015, IPC No. OCT-13-080Applicant:ESPCI INNOV;, Patent No. US 2015125646 A1, Priority date 7 May 2015

    Research output: PatentOther research output

  153. Synthesis and characterization of high-strength silica-based microcapsules to encapsulate organic solvents

    Galgali, GS. & van der Zwaag, S., 2015, Self healing materials: Pioneering research in the Netherlands. van der Zwaag, S. & Brinkman, E. (eds.). Amsterdam: IOS Press, p. 55-59 308 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  154. Synthesis of high-purity, isotropic or textured Cr2AlC bulk ceramics by spark plasma sintering of pressure-less sintered powders

    Duan, X., Shen, L., Jia, D., Zhou, E., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 5, p. 1393-1400 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  155. The impact of intended service temperature on the optimal composition of Laves and M23C6 precipitate strengthened ferritic creep resistant steels

    Lu, Q., Toda, Y., Harada, N., Xu, W. & van der Zwaag, S., 2015, In : Computational Materials Science. 107, September, p. 110-115 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  156. 2014
  157. A combined EIS and x-ray computed tomography study of the effect of a silyl ester on delamination and underfilm pit formation in a coated AA7050 sample

    Garcia Espallargas, SJ., Wu, X. & van der Zwaag, S., 2014, In : Corrosion Engineering, Science and Technology. 70, 5, p. 475-482 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  158. A combined electrochemical impedance spectroscopy and x-ray-computed tomography study of the effect of a silyl ester on delamination and underfilm pit formation in a coated AA7050 sample

    Garcia Espallargas, SJ., Wu, X. & van der Zwaag, S., 2014, In : Corrosion: journal of science and engineering. 70, 5, p. 475-482 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  159. A comparative study of the microstructure and mechanical properties of ¿ + ß titanium alloys

    Li, C., Chen, J., Wu, X. & van der Zwaag, S., 2014, In : Metal Science and Heat Treatment. 56, 7-8, p. 374-380 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  160. A computational design study of novel creep resistant steels for fossil fuel power

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, Advances in Materials Technology for Fossil Power Plants - Proceedings from the 7th International Conference. Gandy, D. & Shingledecker, J. (eds.). Waikoloa, HI; United States: ASM International, p. 1441-1452 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  161. A detailed study of the transformation stasis phenomenon during the isothermal bainite transformation in Mn based low alloy steels

    van der Zwaag, S. & Chen, H., 2014, TMS 2014 143rd Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings. s.n. (ed.). San Diego: Minerals, Metals and Materials Society, p. 901-917 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  162. A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe-C-M alloys

    Chen, H. & van der Zwaag, S., 2014, In : Acta Materialia. 72, p. 1-12 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  163. A material genomic design of advanced high performance, noncorroding steels for ambient and high temperature applications

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Materials Science Forum. 783-786, p. 1201-1206 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  164. A rheological and spectroscopic study on the kinetics of self-healing in a single component diels-alder copolymer and its underlying chemical reaction

    Bose, RK., Kotteritzsch, J., Garcia Espallargas, SJ., Hager, MD., Schubert, US. & van der Zwaag, S., 2014, In : Journal of Polymer Science. Part A, Polymer Chemistry. 52, 12, p. 1669-1675 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  165. A strain based computational design of austenitic creep resistant steel with an improved precipitation hardening

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Acta Materialia. 64, p. 133-143 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  166. Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

    Gamsjager, E., Chen, H. & van der Zwaag, S., 2014, In : Computational Materials Science. 83, p. 92-100 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  167. Designing new corrosion resistant ferritic heat resistant steel based on optimal solid solution strengthening and minimisation of undesirable microstructural components

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Computational Materials Science. 84, p. 198-205 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  168. Dielectrophoretically structured piezoelectric composites

    Khanbareh, H., van der Zwaag, S. & Groen, WA., 2014, Proceedings of 19th International conference on composite materials. Van Hoa, S. & Hubert, P. (eds.). Montreal, Quebec, Canada: Canadian Association for Composite Structures and Materials, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  169. Differences in the predicted phase fractions after intercritical annealing in medium Mn steels using different equilibrium assumptions"

    Farahani, H., Xu, W., Chen, H. & van der Zwaag, S., 2014, Proceedings 2nd International Conference on High Manganese steels. Bleck, W. & Raabe, D. (eds.). Aachen: RWTH Aachen University, p. 333-336 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  170. Effect of dielectrophoretic structuring on piezoelectric and pyroelectric of lead titanate-expoxy composites

    Khanbareh, H., van der Zwaag, S. & Groen, WA., 2014, In : Smart Materials and Structures. 23, 10

    Research output: Contribution to journalArticleScientificpeer-review

  171. Effect of dielectrophoretic structuring on piezoelectric and pyroelectric properties of lead titanate-epoxy composites

    Khanbareh, H., van der Zwaag, S. & Groen, WA., 2014, In : Smart Materials and Structures. 23, 10

    Research output: Contribution to journalArticleScientificpeer-review

  172. Effect of free surface on the stability of individual retained austenite grains in a duplex stainless steel

    He, BB., Huang, M., Ngan, AHW. & van der Zwaag, S., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45a, 11, p. 4875-4881 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  173. Effect of heat treatment on microstructure and properties with compression of metastable ß-titanium alloy

    Li, C., Chen, J., Wu, X. & van der Zwaag, S., 2014, In : Metal Science and Heat Treatment. 56, 5-6, p. 245-252 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  174. Effect of heat treatments on the microstructure variation and associated compression properties in ß metastable alloy

    Li, C., Chen, H., Wu, X. & van der Zwaag, S., 2014, In : Metal Science and Heat Treatment. 56, 5-6, p. 17-25 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  175. Healable dual organic-inorganic crosslinked sol-gel based polymers: crosslinking density and tetrasulfide content effect

    Abdolah Zadeh, M., Esteves, ACC., van der Zwaag, S. & Garcia Espallargas, SJ., 2014, In : Journal of Polymer Science. Part A, Polymer Chemistry. 52, p. 1953-1961 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  176. High-resolution X-ray diffraction investigation on the evolution of the substructure of individual austenite grains in TRIP steels during tensile deformation

    Blonde, RJP., Jimenez-Melero, E., Huizenga, RM., Zhao, L., Wright, J., Bruck, EH., van der Zwaag, S. & van Dijk, NH., 2014, In : Journal of Applied Crystallography. 47, 3, p. 965-973 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  177. Mechanical stability of individual austenite grains in TRIP steel studied by synchrotron X-ray diffraction during tensile loading.

    Blonde, RJP., Jimenez-Melero, E., Zhao, L., Wright, JP., Brück, E., van der Zwaag, S. & van Dijk, NH., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 618, p. 280-287 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  178. On the role of free carboxylic groups and cluster conformation on the surface scratch healing behaviour of ionomers

    Vega Vega, JM., Grande, AM., van der Zwaag, S. & Garcia Espallargas, SJ., 2014, In : European Polymer Journal. 57, p. 121-126 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  179. Piezoelectric and mechanical properties of fatigue resistant, self-healing PZT-ionomer composites

    Kunnamkuzhakkal James, N., Lafont, UL., van der Zwaag, S. & Groen, WA., 2014, In : Smart Materials and Structures. 23, 5, p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  180. Piezoelectric and pyroelectric properties of lead titanate-polyethylene oxide composites

    Khanbareh, H., van der Zwaag, S. & Groen, WA., 2014, Proceedings of the 14th electroceramics conference. s.n. (ed.). Melville: AIP Publishing, p. 46-51 6 p. (AIP Conference Proceedings; vol. 1627).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  181. Polymeric material comprising multiple cavities

    van der Zwaag, S., Fischer, H. & Mookhoek, SD., 2014, IPC No. Applicant: SD Mookhoek, RH Fischer, Stichting Dutch Polymer Inst, S van der Zwaag, Patent No. JP 5476625 B2, Priority date 23 Apr 2014

    Research output: PatentOther research output

  182. Position-dependent shear-induced austenite-martensite transformation in double-notched TRIP and dual-phase steel samples

    Blonde, RJP., Jimenez-Melero, E., Ponnusami, SA., Zhao, L., Schell, N., Bruck, EH., van der Zwaag, S. & van Dijk, NH., 2014, In : Journal of Applied Crystallography. 47, 3, p. 956-964 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  183. Postponing crack nucleation in 2024 aluminium alloy by dynamic precipitation from the supersaturated state

    Mahdavi Shahri, M., Alderliesten, RC., van der Zwaag, S. & Schut, H., 2014, In : Advanced Materials Research. 891-892, p. 1577-1584 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  184. Predicting the Austenite Fraction After Intercritical Annealing in Lean Steels as a Function of the Initial Microstructure

    Chen, H., Xu, X., Xu, W. & van der Zwaag, S., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45a, 4, p. 1675-1679 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  185. Predicting the effect of Mo, Ni, and Si on the bainitic stasis

    Chen, H. & van der Zwaag, S., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45, 8, p. 3429-3437 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  186. Preferential Au precipitation at deformation-induced defects in Fe-Au and Fe-Au-B-N alloys

    Zhang, S., Langelaan, G., Brouwer, JC., Sloof, WG., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2014, In : Journal of Alloys and Compounds. 584, p. 425-429 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  187. Process-time Optimization of Vacuum Degassing Using a Genetic Alloy Design Approach

    Dilner, DVEV., Lu, Q., Mao, H., Xu, W., van der Zwaag, S. & Selleby, M., 2014, In : Materials. 7, p. 7997-8011 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  188. Review of current strategies to induce self-healing behaviour in fibre reinforced polymer based composites

    van der Zwaag, S., Grande, AM., Post, W., Garcia Espallargas, SJ. & Bor, T., 2014, In : Materials Science and Technology. 30, 13a, p. 1633-1641 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  189. Self-healing thermally conductive adhesives

    Lafont, UL., Moreno Belle, C., van Zeijl, HW. & van der Zwaag, S., 2014, In : Journal of Intelligent Material Systems and Structures. 25, 1, p. 67-74 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  190. The computational design of W and co-containing creep-resistant steels with barely coarsening laves phase and M23C6 as the strengthening precipitates

    Lu, Q., Xu, W. & van der Zwaag, S., 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45A, 13, p. 6067-6074 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  191. 2013
  192. A cohesive elements based model to describe fracture and cohesive healing in elastomers

    Baldi, A., Grande, AM., Bose, RK., Airoldi, A., Garcia Espallargas, SJ., Di Landro, L. & van der Zwaag, S., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Conrete Research, p. 673-676 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  193. A conceptual study into the potential of max-phase ceramics for self-healing of crack damage

    Farle, AM., van der Zwaag, S. & Sloof, WG., 2013, Proceedings of the 4th International Conference on Self-Healing Materials. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent, Belgium: Magnel Laboratory for Concrete Research, p. 270-273 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  194. A strain-based computational design of creep-resistant steels

    Lu, Q., Xu, W. & van der Zwaag, S., 2013, In : Acta Materialia. 64, feb 2014, p. 133-143 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  195. A study of the temperature dependent healing capabilities of new polymers based on Diels-Alder cycloaddition

    Kötteritzsch, J., Hager, MD., Schubert, US., Bose, RK., Garcia Espallargas, SJ. & van der Zwaag, S., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Concrete Research, p. 298-302 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  196. Acomparative study of the microstructure and mechanical properties of ¿+ß titanium alloys

    Li, C., Chen, H., Wu, X. & van der Zwaag, S., 2013, In : Metal Science and Heat Treatment.

    Research output: Contribution to journalArticleScientificpeer-review

  197. Analysis of ferrite growth retardation induced by local Mn enrichment in austenite created by prior interface passage

    Chen, H. & van der Zwaag, S., 2013, In : Acta Materialia. 61, 4, p. 1338-1349 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  198. Analysis of transformation stasis during the isothermal bainitic ferrite formation in Fe-C-Mn and Fe-C-Mn-Si alloys.

    Chen, H., Zhu, K., Zhao, L. & van der Zwaag, S., 2013, In : Acta Materialia. 61, p. 5458-5468 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  199. Application of interrupted cooling experiments to study the mechanism of bainitic ferrite formation in steels

    Chen, H., Borgenstam, A., Odqvist, J., Zuazo, I., Goune, M., Agren, J. & van der Zwaag, S., 2013, In : Acta Materialia. 61, 12, p. 4512-4523 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  200. Compartmented fibres: the concept of multiple self-healing in advanced fibre composites

    Prajer, M., Wu, X., Garcia Espallargas, SJ. & van der Zwaag, S., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Concrete Research, p. 693-697 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  201. Computational design of precipitation strengthened austenitic heat-resistant steels

    Lu, Q., Xu, W. & van der Zwaag, S., 2013, In : Philosophical Magazine (London, 2003). 93, 25, p. 3391-3412 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  202. Defect-induced Au precipitation in Fe-Au and Fe-Au-B-N alloys studied by in situ small-angle neutron scattering

    Zhang, S., Kohlbrecher, J., Tichelaar, FD., Langelaan, G., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2013, In : Acta Materialia. 61, p. 7009-7019 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  203. Design of low hardness abrasion resistant steels

    Xu, X., Xu, W., Ederveen Hipgrave, F. & van der Zwaag, S., 2013, In : Wear. 301, 1-2, p. 89-93 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  204. Effect of carbon on copper precipitation in deformed Fe-based alloys studied by positron annihilation spectroscopy

    Zhang, S., Schut, H., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2013, In : Journal of Physics: Conference Series. 443, 012027, p. 1-4 4 p.

    Research output: Contribution to journalConference articleScientificpeer-review

  205. Effect of strain rate on stress-induced martensitic formation and the compressive properties of Ti-V-(Cr,Fe)- Al

    Li, C., Chen, H., Wu, X. & van der Zwaag, S., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 573, p. 111-118 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  206. Elucidating the role of partitioning of subsitutional alloying elements at the austenite-ferrite interface during phase transformaitons in lean steels

    van der Zwaag, S. & Chen, H., 2013, Proceedings of 2nd Internationals Symposium on Automotive Steels. S.N. (ed.). Anshan: China Machine Press, p. 37-46 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  207. Encapsulation of sacrificial silicon containing particles for SH oxide ceramics via a boehmite precursor route

    Carabat, AL., van der Zwaag, S. & Sloof, WG., 2013, Proceedings of the 4th International Conference on Self-Healing Materials. De Belie, N., van der Zwaag, S., Gruyaert, E., Van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Concrete Research, p. 278-281 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  208. Enhancing the creep life of steels by self healing through dynamic in-service precipitation

    Langelaan, G., Zhang, S., Bruck, EH., van der Zwaag, S. & van Dijk, NH., 2013, p. 102-102. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  209. Filling of surface cracks in MAX phase ceramics using cathodic electrophoretic deposition

    Abdelkader, AM., Garcia Espallargas, SJ. & van der Zwaag, S., 2013, In : Ceramics International. 39, 3, p. 3429-3433 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  210. Healing particles in self-healing thermal barrier coatings

    Derelioglu, Z., Ponnusami, SA., Turteltaub, SR., van der Zwaag, S. & Sloof, WG., 2013, Proceedings of the 4th International Conference on Self-Healing Materials. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent, Belgium: Magnel Laboratory for Concrete Research, p. 578-581 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  211. In situ observation of austenite-ferrite interface migration in a lean Mn steel during cyclic partial phase transformations

    Chen, H., Gamsjager, E., Schider, S., Khanbareh, H. & van der Zwaag, S., 2013, In : Acta Materialia. 61, 7, p. 2414-2424 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  212. Methods to monitor and quantify (self-) healing in polymers and polymer systems

    Bose, RK., Lafont, UL., Vega Vega, JM., Garcia Espallargas, SJ. & van der Zwaag, S., 2013, Self-Healing Polymers; From Principles to Applications. Binder, WH. (ed.). Weinheim, Germany: Wiley-VCH Verlag, p. 337-359 446 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  213. Model based design of self healing expandable coatings under different environmental conditions

    Javierre, E., Camanes, V., Garcia Espallargas, SJ., van der Zwaag, S. & Garcia-Aznar, JM., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Concrete Research, p. 142-145 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  214. Modeling and charcaterization of dielectrophoretically structured piezoelectric composites using piezoceramic particle inclusions with high aspect ratios

    van den Ende, DA., Maier, RA., Neer, PLMJ., van der Zwaag, S., Randall, CA. & Groen, WA., 2013, In : Journal of Applied Physics. 113, 3, p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  215. Monitoring the restoration of interfacial contact for self healing thermal interface materials for led and microelectronic applications

    Lafont, UL., van Zeijl, HW. & van der Zwaag, S., 2013, Proceedings 4th International Conference on Self-Healing Materials. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent, Belgium: Magnel Laboratory for Concrete Research, p. 164-167 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  216. Multi length scale characterization of austenite in TRIP steels using high-energy X-ray diffraction.

    Blonde, RJP., Jimenez-Melero, E., Zhao, L., Wright, JP., Brück, E., van der Zwaag, S. & van Dijk, NH., 2013, In : Powder Diffraction: an international journal of materials characterization. 28, 2, p. 77-80 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  217. Multiple healing in multi-functional polymer composites

    Lafont, UL., van Zeijl, HW. & van der Zwaag, S., 2013, Proceedings 4th International Conference on Self-Healing Materials. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent, Belgium: Magnel Laborator for Concrete Research, p. 467-470 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  218. On the healing mechanism of sol-gel derived hybrid materials containing dynamic DI-sulfide bonds

    Abdolah Zadeh, M., Esteves, ACC., van der Zwaag, S. & Garcia Espallargas, SJ., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Titelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Concrete, p. 529-532 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  219. On the use of high precision electrical resistance measurement for analyzing the damage development during accelerated test of Pb-free solder interconnects

    Zhang, J., van der Zwaag, S., van Zeijl, HW. & Zhang, GQ., 2013, Proceedings 63rd Electronic Components and Technology Conference (ECTC 2013). Sauter, W. (ed.). Piscataway: IEEE Society, p. 192-199 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  220. Oxidation and crack healing behaviour of a fine-grained Cr2AlC ceramics

    Li, S., Xiao, L., Song, G., Wu, X., Sloof, WG. & van der Zwaag, S., 2013, In : Journal of the American Ceramic Society. 96, 3, p. 892-899 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  221. Oxidation induced crack healing of Cr2(Al,Si)C max phase ceramic

    Shen, L., Li, SB., van der Zwaag, S. & Sloof, WG., 2013, Proceedings of the 4th International Conference on Self-Healing Materials. De Belie, N., van der Zwaag, S., Gruyaert, E., Van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Concrete Research, p. 282-285 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  222. Piezoelectric and mechanical properties of structured PZT-epoxy composites

    Kunnamkuzhakkal James, N., van den Ende, DA., Lafont, UL., van der Zwaag, S. & Groen, WA., 2013, In : Journal of Materials Research. 28, 4, p. 635-641 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  223. Positron annihilation study of ageing precipitation in deformed Fe-Cu-B-N-C

    Zhang, S., Schut, H., Kohlbrecher, J., Langelaan, G., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2013, In : Philosophical Magazine (London, 2003). 93, p. 4182-4197 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  224. Positron annihilation study on deformation-induced Au precipitation in Fe-Au and Fe-Au-B-N alloys

    Zhang, S., Schut, H., Cizek, J., Tichelaar, FD., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2013, In : Journal of Materials Science. 49, 6, p. 2509-2518 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  225. Positron annihilation study on repeated deformation/precipitation aging in Fe-Cu-B-N alloys

    He, SM., Brandhoff, PN., Schut, H., van der Zwaag, S. & van Dijk, NH., 2013, In : Journal of Materials Science. 48, 18, p. 6150-6156 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  226. Robust piezoelecric composites for energy harvesting in high-strain environments

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2013, In : Journal of Intelligent Material Systems and Structures. 24, 18, p. 2262-2269 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  227. Self healing by cu precipitation in deformed FE-CU-B-N-C

    Zhang, S., Langelaan, G., Schut, H., Bruck, EH., van der Zwaag, S. & van Dijk, NH., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratoty for Concrete Research, p. 556-559 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  228. Self-healing metallopolymers: Detailed investigation of the self-healing properties by scratch testing

    Bode, S., Bose, RK., Sandmann, B., Hager, MD., Garcia Espallargas, SJ., van der Zwaag, S. & Schubert, US., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Concrete Research, p. 374-377 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  229. Sensing and energy harvesting novel polymer composites

    van der Zwaag, S., van den Ende, DA. & Groen, WA., 2013, Materials experience, fundamentals of materials and design. Karana, E., Pedgley, O. & Rognoli, V. (eds.). Oxford: Elsevier, p. 221-234 376 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  230. Switchable static friction of piezoelectric composites - silicon wafer contacts

    van den Ende, DA., Fischer, H., Groen, WA. & van der Zwaag, S., 2013, In : Applied Physics Letters. 102, 4, p. 1-4 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  231. The effect of sic particle size on the healing efficiency of alumina at high temperatures

    Boatemaa, L., Zhou, J., van der Zwaag, S. & Sloof, WG., 2013, Proceedings of the 4th International Conference on Self-Healing Materials. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent, Belgium: Magnel Laboratory for Concrete Research, p. 97-100 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  232. The mechanical stability of retained austenite in low-alloyed TRIP steel under shear loading

    Blonde, RJP., Jimenez-Melero, E., Zhao, L., Schell, N., Brück, EH., van der Zwaag, S. & van Dijk, NH., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 594, p. 125-134 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  233. The role of clusters on the healing efficiency of a modified Zn based ionomer

    Vega Vega, JM., van der Zwaag, S. & Garcia Espallargas, SJ., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent, Belgium: Magnel Laboratory for Concrete Research, p. 618-621 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  234. The structure of a general materials genome approach to the design of new steel grades for specific properties

    Xu, W., Lu, Q., Xu, X. & van der Zwaag, S., 2013, In : Computer Methods In Materials Science. 13, 3, p. 382-394 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  235. Understanding the molecular mechanisms involved in the interfacial self-healing of supramolecular rubbers

    Bose, RK., Garcia Espallargas, SJ. & van der Zwaag, S., 2013, ICSHM2013. de Belie, N., van der Zwaag, S., Gruyaert, E., van Tittelboom, K. & Debbaut, B. (eds.). Ghent: Magnel Laboratory for Concrete Research, p. 433-436 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  236. 2012
  237. Ab-initio modeling of metastable precipitation processes in aluminum 7xxx alloys

    de Jong, M., van der Zwaag, S. & Sluiter, MHF., 2012, In : International Journal of Materials Research. 103, 8, p. 972-979 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  238. Alginate fibres containing discrete liquid filled vacuoles for controlled delivery of healing agents in fibre reinforced composites

    Mookhoek, SD., Fischer, H. & van der Zwaag, S., 2012, In : Composites Part A: Applied Science and Manufacturing. 43, 12, p. 2176-2182 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  239. Analysis of the fractal dimension of grain boundaries of AA7050 aluminum alloys and its relationship to fracture toughness

    Khanbareh, H., Wu, X. & van der Zwaag, S., 2012, In : Journal of Materials Science. 47, 17, p. 6246-6253 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  240. Analysis of the stagnant stage in diffusional phase transformations starting from austenite¿ferrite mixtures

    Chen, H., Goune, M. & van der Zwaag, S., 2012, In : Computational Materials Science. 55, p. 34-43 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  241. Corrosion trigerred self-healing sol-gel-coatings

    Abdolah Zadeh, M., Garcia Espallargas, SJ. & van der Zwaag, S., 2012, p. 52-52. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  242. Dielectrophoretically structured piezoelectric composites with high aspect ratio piezoelectric particles inclusions

    van den Ende, DA., van Kempen, SE., Wu, X., Groen, WA., Randall, CA. & van der Zwaag, S., 2012, In : Journal of Applied Physics. 111, 12, p. 124107-1-124107-13

    Research output: Contribution to journalArticleScientificpeer-review

  243. Direct strain energy harvesting in automobile tires using piezoelectric PZT-polymer composites

    van den Ende, DA., van de Wiel, HJ., Groen, WA. & van der Zwaag, S., 2012, In : Smart Materials and Structures. 21, 1, p. 015011-1-015011-11

    Research output: Contribution to journalArticleScientificpeer-review

  244. Effect of low temperature aging on internal friction of AA2024

    Risanti, DD. & van der Zwaag, S., 2012, In : Advanced Materials Research. 463, p. 41-46 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  245. Filling of surface cracks in MAX phase ceramics using cathodic electrophoretic deposition

    Abdelkader, AM., Garcia Espallargas, SJ. & van der Zwaag, S., 2012, In : Ceramic Forum International: journal for the ceramic industries and ceramic research. 2013, p. 1-5 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  246. High temperature oxidation behaviour of Ti2AlC ceramic at 1200°C

    Song, G., Schnabel, V., Kwakernaak, C., van der Zwaag, S., Schneider, J. & Sloof, WG., 2012, In : Materials at High Temperatures: materials generation applications. 29, 3, p. 205-209 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  247. High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels.

    Blondé, R., Jimenez-Melero, E., Zhao, L., Wright, JP., Brück, E., van der Zwaag, S. & van Dijk, NH., 2012, In : Acta Materialia. 60, p. 565-577 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  248. Increasing the reliability of solid state lighting systems via self healing approaches: a review

    Lafont, UL., van Zeijl, HW. & van der Zwaag, S., 2012, In : Microelectronics Reliability. 52, 1, p. 71-89 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  249. Indirect evidence for the existence of the Mn partitioning spike during the austenite to ferrite transformation

    Chen, H. & van der Zwaag, S., 2012, In : Philosophical Magazine Letters: structure and properties of condensed matter. 92, 2, p. 86-92 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  250. Influence of cross-linkers on the cohesive and adhesive self-healing ability of polysulfide-based thermosets

    Lafont, UL., van Zeijl, HW. & van der Zwaag, S., 2012, In : ACS Applied Materials and Interfaces. 4, 11, p. 6280-6288 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  251. Ionomers as self-healing coatings for metal protection

    Vega Vega, JM., Garcia Espallargas, SJ. & van der Zwaag, S., 2012, p. 75-75. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  252. Kinetic of phase transformations in steels

    van der Zwaag, S., 2012, Phase transformations in steels, volume 1: Fundamentals and diffusion-controlled transformations. Edmonds, DV. & Pereloma, E. (eds.). Woodhead Publishing Limited, p. 126-152 619 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  253. Linking crack tip morphology to tear toughness of hot rolled AA7050 alloys using X-ray computed tomography

    Wu, X., Schlangen, E. & van der Zwaag, S., 2012, In : Advanced Engineering Materials. 14, 7, p. 449-456 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  254. Linking porosity to rolling reduction and fatigue lifetime of hot rolled AA7xxx by 3D x-ray computed tomography

    Wu, X., Schlangen, E. & van der Zwaag, S., 2012, In : Advanced Engineering Materials. 14, 7, p. 457-463 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  255. Materials with self-healing cohesive and adhesive properties

    Lafont, UL., Vega Vega, JM., van Zeijl, HW., Garcia Espallargas, SJ. & van der Zwaag, S., 2012, Proceedings of the 15th DYFP Conference. McKenna, GB. (ed.). Eindhoven: Eindhoven University of Technology, p. 373-376 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  256. Multiple crack healing of Ti2AIC ceramic

    Li, S., Song, G., Kwakernaak, A., van der Zwaag, S. & Sloof, WG., 2012, Festschrift in honor of Jeff Th.M. de Hosson. Bronsveld, P. & Kubbinga, H. (eds.). Groningen: Groningen University Press, p. 355-370 400 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  257. Multiple crack healing of a Ti2AlC ceramic

    Li, S., Song, G., Kwakernaak, C., van der Zwaag, S. & Sloof, WG., 2012, In : Journal of the European Ceramic Society. 32, 8, p. 1813-1820 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  258. Numerical study of the scratch-closing behavior of coatings containing an expansive layer

    Rey, R., Javierre, E., Garcia Espallargas, SJ., van der Zwaag, S. & Garcia-Aznar, JM., 2012, In : Surface and Coatings Technology. 206, 8-9, p. 2220-2225 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  259. Prediction of decarburized ferrite depth of hypoeutectoid steel with simultaneous oxidation

    Choi, SW. & van der Zwaag, S., 2012, In : ISIJ International. 52, 4, p. 549-558 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  260. Real-time synchrotron X-ray diffraction study on the isothermal martensite transformation of maraging steel in high magnetic fields

    San Martin, D., Jimenez-Melero, E., Duffy, JA., Honkimaki, V., van der Zwaag, S. & van Dijk, NH., 2012, In : Journal of Applied Crystallography. 45, 4, p. 748-757 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  261. Robust piezoelectric composites for energy harvesting in high strain environments

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2012, In : Journal of Intelligent Material Systems and Structures. p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  262. Schadeherstel: Een zelfherstellend materiaal doet dat nu allemaal zelf

    van der Zwaag, S., Brinkman, E. & van Hees, RPJ., 2012, In : Stedebouw en Architectuur. 2012, p. 20-23 4 p.

    Research output: Contribution to journalArticleProfessional

  263. Self-healing composites with oriented fillers

    Lafont, UL., Kunnamkuzhakkal James, N., Groen, WA., van Zeijl, HW. & van der Zwaag, S., 2012, Proceedings of the 15th International Conference on Deformation, Yield and Fracture Polymers. McKenna, GB. (ed.). Eindhoven: Eindhoven University of Technology, p. 379-382 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  264. Self-healing polymers based on sol-gel chemistry

    Abdolah Zadeh, M., Garcia Espallargas, SJ. & van der Zwaag, S., 2012, p. 90-90. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  265. Self-healing thermal conductive composites

    Lafont, UL., Moreno Belle, C., van Zeijl, HW. & van der Zwaag, S., 2012, p. 1-1. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  266. Tailoring the release of encapsulated corrosion inhibitors from damaged coatings: controlled release kinetics by overlapping diffusion fonts

    Javierre, E., Garcia Espallargas, SJ., Mol, JMC., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2012, In : Progress in Organic Coatings. 75, 1-2, p. 20-27 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  267. The production of compartmented liquid-containing fibres for self healing fibre reinforced composites

    Prajer, M., Mookhoek, SD., Garcia Espallargas, SJ. & van der Zwaag, S., 2012, Proceedings of the 15th International Conference on Deformation, Yield and Fracture Polymers. McKenna, GB. (ed.). Eindhoven: Eindhoven University of Technology, p. 385-388 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  268. Tuning the stress induced martensitic formation in titanium alloys by alloy design

    Li, C., Chen, H., Wu, X., Wang, W. & van der Zwaag, S., 2012, In : Journal of Materials Science. 47, 9, p. 4093-4100 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  269. 2011
  270. A critical appraisal of the potential of self healing polymeric coatings

    Garcia Espallargas, SJ., Fisher, H. & van der Zwaag, S., 2011, In : Progress in Organic Coatings. 72, 3, p. 211-221 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  271. A mixed-mode model considering soft impingement effects for solid-state partitioning phase transformations

    Chen, H. & van der Zwaag, S., 2011, Solid-Solid phase transformations in inorganic materials. Brechet, Y., Clouet, E., Deschamps, A., Finel, A. & Soisson, F. (eds.). Trans Tech Publications, p. 561-566 6 p. (Solid State Phenomena; vol. 172-174).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  272. Alternatieven voor zeldzame grondstoffen ontwerpen; Vervangingstechniek

    van der Zwaag, S., 2011, In : De Ingenieur. p. 20-22 3 p.

    Research output: Contribution to journalArticleProfessional

  273. Application of cyclic partial phase transformations for identifying kinetic transitions during solid-state phase transformations: Experiments and modeling

    Chen, H., Appolaire, B. & van der Zwaag, S., 2011, In : Acta Materialia. 59, 17, p. 6751-6760 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  274. First-principles and genetic modelling of precipitation sequences in aluminium alloys

    de Jong, M., Dutta, RK., Sluiter, MHF., Miroux, AG., van der Zwaag, S., Sietsma, J. & Rivera Diaz del Castillo, PEJ., 2011, In : Solid State Phenomena. 172-174, p. 285-290 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  275. Herstel zonder onderhoud

    van der Zwaag, S., 2011, In : Maintenance Management. 10, p. 34-35 2 p.

    Research output: Contribution to journalArticleProfessional

  276. In situ synchrotron study on the interplay between martensite formation, texture evolution and load partitioning in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Wright, JP. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 6407-6416 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  277. Influence of alpha morphology and volume fraction on the stress-induced martensitic transformation in Ti-10V-2Fe-3Al

    Li, C., Wu, X., Chen, H. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, 18, p. 5854-5860 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  278. Invited topical review: Liquid crystal main-chain polymers for high-performance fibre applications

    Picken, SJ., Sikkema, DJ., Boerstoel, H., Dingemans, TJ. & van der Zwaag, S., 2011, In : Liquid Crystals: an international journal in the field of anisotropic fluids. 38, p. 1591-1605 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  279. Microstructural control of the austenite stability in low-alloyed trip steels

    Blonde, RJP., Jimenez, E., van Dijk, NH., Brueck, EH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2011, In : Solid State Phenomena. 172-174, p. 196-201 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  280. Modeling of soft impingement effect during solid-state partitioning phase transformations in binary alloys

    Chen, H. & van der Zwaag, S., 2011, In : Journal of Materials Science. 46, 5, p. 1328-1336 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  281. Modelling the strongest grain size in nanocrystalline FCC metals

    Huang, M., Bouaziz, O. & van der Zwaag, S., 2011, In : Materials Letters. 65, p. 3128-3130 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  282. Numerical modelling of the self healing response of coatings based on expansive phases

    Javierre, E., Rey, R., Perez, MA., Garcia Espallargas, SJ., van der Zwaag, S. & Garcia-Aznar, JM., 2011, Proceedings of CMNE 2011. Rodriguez-Ferran, A. (ed.). Coimbra, Portugal: CMNE, p. 2220-2225 6 p. (Surface and Coatings Technology; vol. 206).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  283. Parametric study of multiphase TRIP steels undergoing cyclic loading

    Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR. & van der Zwaag, S., 2011, In : Computational Materials Science. 50, 2011, p. 1490-1498 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  284. Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach

    Xu, W. & van der Zwaag, S., 2011, In : ISIJ International. 51, 6, p. 1005-1010 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  285. Synthesis and characterization of silica microcapsules using a sustainable solvent system template

    Galgali, GS., Schlangen, E. & van der Zwaag, S., 2011, In : Materials Research Bulletin. 46, 12, p. 2445-2449 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  286. The effect of calcining temperature on the properties of 0-3 piezoelectric composites of PZT and a liquid crystalline thermosetting polymer

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2011, In : Journal of Electroceramics. 27, 1, p. 13-19 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  287. The generation of derformation damage during fatigue loading in AL-Cu alloy studied by the doppler broadening technique

    Ruiz-Ripoll, ML., Schut, H., van Dijk, NH., Alderliesten, RC., van der Zwaag, S. & Benedictus, R., 2011, Proceedings of SLOPOS 12. Buckman, S. (ed.). Magnetic Island, Australia: IOPscience, p. 1-4 4 p. (Journal of Physics: Conference Series; vol. 262).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  288. Ultra-high temperature ablation behavior of Ti2AlC ceramics under an oxyacetylene flame

    Song, G., Li, S., Zhao, C., Sloof, WG., van der Zwaag, S., Pei, YT. & Hosson, T., 2011, In : Journal of the European Ceramic Society. 31, p. 855-862 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  289. Zelfherstellende materialen

    van der Zwaag, S., 2011, In : Asfalt. 1, 38, p. 13-14 2 p.

    Research output: Contribution to journalArticleProfessional

  290. 2010
  291. A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Yan, W., Yang, K., San Martin, D., van der Zwaag, S. & Kestens, LAI., 2010, In : Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  292. Application of the cyclic phase tranformation concept for investigating growth kinetics of solid-state partitioning phase transformations

    Chen, H. & van der Zwaag, S., 2010, In : Computational Materials Science. 49, p. 801-813 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  293. Applying SEM-Based X-ray microtomography to observe self-healing in solvent encapsulated thermoplastic materials

    Mookhoek, SD., Mayo, SC., Hughes, A. E., Furman, SA., Fischer, H. & van der Zwaag, S., 2010, In : Advanced Engineering Materials. 12, 3, p. 228-234 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  294. Autonomous damage initiated healing in a thermo-responsive ionomer

    Varley, R. J. & van der Zwaag, S., 2010, In : Polymer International. 59, 8, p. 1031-1038 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  295. Characterization of the adhesion of single-walled carbon nanotubes in poly (p-phenylene terephthalamide) composite fibres

    Deng, L., Young, RJ., van der Zwaag, S. & Picken, SJ., 2010, In : Polymer. 51, p. 2033-2039 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  296. Characterization of ultra-high temperature ablation of Ti2AlC ceramics under oxyacetylene flame

    Song, G., Li, S., Zhao, C., Sloof, WG., van der Zwaag, S., Pei, YT. & Hosson, T., 2010, Proceedings of the 7th International Conference on High Temperature Ceramic Materials and Composites. Krenkel, W. & Lamon, J. (eds.). Berlijn: AVISO Verlagsgesellschaft, p. 806-811 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  297. Development of temperature stable charge based piezoelectric composite quasi-static pressure sensors

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2010, In : Sensors and Actuators A: Physical: an international journal devoted to research and development of physical and chemical transducers. 163, 1, p. 25-31 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  298. Fabricacion y caracterizacion de un nuevo material compuesto AA2124/nitip

    San Martin, D., Risanti, DD., Garces, G., Alcala, G., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2010, Proceedings of: XI Congreso Nacional de Materiales. Barreda, JJS. (ed.). Zaragoza, Spain: Universitat Jaume-1, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  299. Genetic alloy design of ultra high strength stainless steels: from thermodynamics to quantum mechanics

    Rivera Diaz del Castillo, PEJ., Xu, W. & van der Zwaag, S., 2010, In : Materials Science Forum. 638-642, Part 1-4, p. 3473-3478 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  300. Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by ni3ti intermetallic nanprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Wang, W., Bliznuk, V., Kestens, LAI. & van der Zwaag, S., 2010, In : Acta Materialia. 58, 10, p. 3582-3593 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  301. Improving the d(33) and g(33) properties of 0-3 piezoelectric composites by dielectrophoresis

    van den Ende, DA., bory, BF., Groen, WA. & van der Zwaag, S., 2010, In : Journal of Applied Physics. 107, 2

    Research output: Contribution to journalArticleScientificpeer-review

  302. In situ determination of aging precipitation in deformed Fe-Cu and Fe-Cu-B-N alloys by time-resolved small-angle neutron scattering

    He, S., van Dijk, NH., Paladugu, MC., Schut, H., Kohlbrecher, J., Tichelaar, FD. & van der Zwaag, S., 2010, In : Physical Review B (Condensed Matter and Materials Physics). 82, 174111, p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  303. Kansen op herstel

    van der Zwaag, S., 2010, Consensor 2.0 Kansen in beton/inspelen op trends en ontwikkelingen. Rotterdam: ConSensor BV, p. 9-11

    Research output: Chapter in Book/Report/Conference proceedingChapterPopular

  304. Mechanical properties of low temperature synthesized dense and fine-grained cr2alc ceramics

    Li, SB., Yu, WB., Zhai, HX., Song, G., Sloof, WG. & van der Zwaag, S., 2010, In : Journal of the European Ceramic Society. 31, 1-2, p. 217-224 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  305. Properties of quasi 1-3 piezoelectric pzt-epoxy composites obtained by dielectrophoresis

    van den Ende, DA., bory, BF., Groen, WA. & van der Zwaag, S., 2010, In : Integrated Ferroelectrics. 114, 1, p. 108-118 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  306. Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach

    Xu, W. & van der Zwaag, S., 2010, Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach. DeArdo, AJ. & Pontremoli, M. (eds.). Peschiera del Garda (Verona), Italy: Associazione Italiana di Metallurgia, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  307. Real-time martensitic transformation kinetics in maraging steel under high magnetic fields

    San Martin, D., van Dijk, NH., Jimenez-Melero, E., Kampert, E., Zeitler, U. & van der Zwaag, S., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 527, 20, p. 5241-5245 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  308. Routes and mechanisms towards self healing behaviour in engineering materials

    van der Zwaag, S., 2010, In : Bulletin of The Polish Academy of Sciences. . Technical Sciences. 58, 2, p. 215-224 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  309. Self-healing in nanoparticle-reinforced and other polymer systems

    Picken, SJ., Mookhoek, SD., Fischer, H. & van der Zwaag, S., 2010, Optimization of polymer of polymer nanocomposite properties. Mittal, V. (ed.). Weinheim: Wiley-VCH, p. 261-278 418 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  310. Self-healing materials

    Hager, MD., Greil, P., Leyens, C., van der Zwaag, S. & Schubert, US., 2010, In : Advanced Materials. 22, p. 5424-5430 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  311. Teaching ethics to engineering students: from clean concepts to dirty tricks: the impact of practical circumstances and personal relationships on ethical decision-making

    Kroesen, JO. & van der Zwaag, S., 2010, Philosophy and engineering: an emerging agenda. Goldberg, DE. & van de Poel, IR. (eds.). Dordrecht / New York / Berlin: Springer, p. 127-137 361 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  312. The effect of cluster plasticisation on the self healing behaviour of ionomers

    Varley, R. J., Shen, S. & van der Zwaag, S., 2010, In : Polymer. 51, 3, p. 679-686 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  313. The generation of deformation damage during fatigue loading in Al-Cu alloy studied by the Doppler Broadening technique

    Ruiz Ripoll, ML., Schut, H., Alderliesten, RC., van der Zwaag, S. & Benedictus, R., 2010, 12th International Workshop on Slow Positron Beam Techniques SLOPOS 12. Buckman, S. (ed.). Magnetic Island, N.Queensland, Australia: ARC Centre of Excellence for Antimatter-Matter Studies, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  314. The influence of the lateral filament texture on the compressive properties of pppta aramid filaments

    Knijnenberg, A., Koenders, BM., Gebben, B., Klop, E., Young, RJ. & van der Zwaag, S., 2010, In : Journal of Materials Science. 45, 10, p. 2708-2714 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  315. The mechanical properties of aa2024 as funcion of the interrupted ageing conditions

    Risanti, DD., Yin, M., Chen, J. & van der Zwaag, S., 2010, In : Materials Science Forum. p. 638-642 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  316. Thermally activated precipitation at deformation induced defects in Fe-Cu and Fe-Cu-B-N alloys studied by positron annihilation spectroscopy

    He, S., van Dijk, NH., Schut, H., Peekstok, ER. & van der Zwaag, S., 2010, In : Physical Review B (Condensed Matter and Materials Physics). 81, 094103, p. 094103-1-094103-10

    Research output: Contribution to journalArticleScientificpeer-review

  317. Towards the development of self healing aluminium alloys to enhance the lifetime of components under fatigue load

    Ruiz Ripoll, ML., Schut, H., van der Zwaag, S., Alderliesten, RC. & Benedictus, R., 2010, Proceedings of the 18th European Conference on Fatigue. s.n. (ed.). s.l.: IOP Self Healing Materials, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  318. 2009
  319. A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  320. A constructive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Mechanics of Materials. 41, 9, p. 982-988 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  321. A mathematical analysis of physiological and morphological aspects of wound closure

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2009, In : Journal of Mathematical Biology. 59, p. 605-630 26 p.

    Research output: Contribution to journalArticleScientificpeer-review

  322. A microchechanical study of the deformation behavior of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  323. A micromechanical study of the deformation behaviour of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  324. A numerical study into the effect of elongated capsules on the healing efficiency of liquid-based systems

    Mookhoek, SD., Fisher, H. & van der Zwaag, S., 2009, In : Computational Materials Science. 47, p. 506-511 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  325. A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

    Risanti, DD., Yin, M., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 523, 1-2, p. 99-111 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  326. Analysis of fracture and healing processes in self-healing thermoplastic systems using quantitatieve x-ray microtomgraphy

    Mookhoek, SD., Mayo, SC., Hughes, A. E., Furman, SA., Fischer, H. & van der Zwaag, S., 2009, 14th international conference on deformation, yield and fracture of polymers. s.n. (ed.). London, UK: IOM Communications, p. 317-320 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  327. Biderectional current-voltage converters based on magnetostrictive/piezoelectric composites

    Jia, Y., Or, SW., Chan, HL., Luo, H. & van der Zwaag, S., 2009, In : Japanese Journal of Applied Physics. Part 2, Letters & Express Lettres. 94, 263504, p. 1-3 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  328. Computational design of UHS maraging stainless steel incorporating compositions as well as austenisation and ageing temperatures as optimisation parameters

    Xu, W., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Philosophical Magazine (London, 2003). 89, 20, p. 1647-1661 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  329. Computing interfaces in diverse applications

    Javierre Perez, E., Vermolen, FJ., Vuik, C., Wesseling, P. & van der Zwaag, S., 2009, ECCOMAS Multidisciplinary jubilee symposium: New computational challenges in materials, structures, and fluids. Mang, H. A. & Periaux, J. (eds.). Berlin: Springer, p. 327-340 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  330. Design of novel high strength Titanium alloys on the basis of intentional plasticity induced transformations

    van der Zwaag, S., Rivera Diaz del Castillo, PEJ. & Neelakantan, S., 2009, In : Cbm Metal Matters. 14, p. 18-19 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  331. Eerste toepassingen selfhealing coatings over vijf jaar verwacht

    van der Zwaag, S. & Mol, A., 2009, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 3, p. 30-33 4 p.

    Research output: Contribution to journalArticleProfessional

  332. Genetic computational design of novel ultra high strength stainless steels: model description and first experimental validation

    Xu, W., del Castillo, PEJRD., Yang, K. & van der Zwaag, S., 2009, TMS 2009 138th annual meeting & exhibition - supplemental proceedings, vol 2: Materials characterization, computation andn modelling. s.n. (ed.). San Francisco, USA: TMS, p. 319-326 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  333. Increase in strength of beta Ti-10V-2Fe-3A1 alloy via Plasticity induced Transformation

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, IPC No. Aangevraagd door M2I en TU Delft, Priority date 1 Mar 2008

    Research output: PatentOther research output

  334. Liquid crystalline matrix polymres for aramid ballistic composites

    de Ruijter, C., van der Zwaag, S., stolze, R. & Dingemans, TJ., 2009, In : Polymer Composites. 31, 4, p. 612-619 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  335. Method for producing a titanium alloy article and an article procuced from a titanium alloy

    Neelakantan, S., van der Zwaag, S. & Rivera Diaz del Castillo, PEJ., 2009, IPC No. Aanvrager M2i en TU Delft, Patent No. 2002499, Priority date 9 Dec 2010

    Research output: PatentOther research output

  336. Modelling the steady state deformation stress under various deformation conditions using a single irreversible thermodynamics based formulation

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 12, p. 3431-3438 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  337. Modelling the strength of ultrafine-grained an nanocrystalline fcc metals

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2009, In : Scripta Materialia. 61, p. 1113-1116 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  338. On measurement of retained austenite in multiphase TRIP steels - results of blind round robin test involving six different techniques.

    Jacques, PJ., Allain, S., Bouaziz, O., De, A., Gourgues, A-F., Hance, BM., Houbaert, Y., Huang, J., Iza-Mendia, A., Kruger, S. E., Radu, M., Samek, L., Speer, J., Zhao, L. & van der Zwaag, S., 2009, In : Materials Science and Technology. 25, 5, p. 567-574 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  339. On the production and properties of novel particulate niti/AA2124 metal matrix composites

    San Martin, D., Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 250`-252

    Research output: Contribution to journalArticleScientificpeer-review

  340. On the production and properties of novel particulate nitip/aa2124 metal matrix composites

    San Martin, D., Risanti, DD., Garces, G., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 526, 1-2, p. 250-252 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  341. On the transformation behaviour of niti particulate reinforced aa2124 composites

    Thorat, RR., Risanti, DD., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Journal of Alloys and Compounds. 477, p. 307-315 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  342. Phase-field simulations of coarsening of Al6Mn precipitates located on grain boundaries in Al alloys.

    Moelens, N., Miroux, AG., Anselmino, E., van der Zwaag, S., Blanpain, B. & Wollants, P., 2009, Supplemental Proceedings of the 2009 TMS Annual Meeting & Exhibition: Materials Characterization, Computation and Modeling.. s.n. (ed.). Warrendale, US: The Minerals, Metals & Materials Society (TMS), p. 303-310 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  343. Plasticity induced transformation in a metastable beta Ti-1023 alloy by controlled heat treatments

    Neelakantan, S., San Martin Fernandez, DM., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Technology. 25, 11, p. 1351-1358 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  344. Polymeric material having an anisotropic shape, useful in the composite material, which is useful to make an article, comprises multiple cavities comprising a functionsl liquid, which is dicyclopentadiene monomer

    Fischer, H., Mookhoek, SD. & van der Zwaag, S., 2009, IPC No. Patent Assignee(s): Stichting Dutch Polymer Inst. (DUP-Non-standard), Patent No. WO2008125673-A1, Priority date 23 Oct 2008

    Research output: PatentOther research output

  345. Predicting the stress-strain behaviour of carbon steel under hot working conditions: an irreversible thermodynamics model

    Huang, M., del Castillo, PEJRD., Perlade, A. & van der Zwaag, S., 2009, In : Scripta Materialia. 61, 6, p. 648-651 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  346. Prediction of the martensite start temperature for beta titanium alloys as a function of composition

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Scripta Materialia. 60, 8, p. 611-614 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  347. Self-healing behaviour in man-made engineering materials: bio-inspired but taking into account their intrinsic character

    van der Zwaag, S., van Dijk, NH., Jonkers, HM., Mookhoek, SD. & Sloof, WG., 2009, In : Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences. 367, p. 1689-1704 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  348. Structure and properties of aramid fibres

    van der Zwaag, S., 2009, Handbook of textitle fibre structure. M Jaffe SJ Eichhorn, JWS. H. (ed.). UK: Woodhead Publishing in Textiles, p. 394-412 508 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  349. The composition and temperature effects on the ultra high strength stainless steel design

    Xu, W., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : International Journal of Modern Physics B: condensed matter physics: statistical physics: applied physics. 23, 6-7, p. 1060-1065 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  350. The effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 5, p. 533-543 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  351. Toughening of a ZrC particle-reinforced Ti3AlC2 composite

    Song, G., Xu, Q., Sloof, W. G. & van der Zwaag, S., 2009, Mechanical properties and processing of ceramic binary, ternary and composite systems. s.n. (ed.). Daytona Beach, Florida, USA: Wiley, p. 31-39 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  352. 2008
  353. A Micro-Raman study on compressive failure in thermo-chemically modified aramid single filaments

    Knijnenberg, A., Dingemans, TJ. & van der Zwaag, S., 2008, Polymer Fibres 2008. Milford, Surrey: Meetings Management, p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  354. A study on compressive failure in aramid based single filaments

    Knijnenberg, A., Dingemans, TJ. & van der Zwaag, S., 2008.

    Research output: Contribution to conferenceAbstractScientific

  355. Computational design of UHS stainless steel strengthened by multi-species nanoprecipitates combining genetic algorithms and Thermokinetics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, New Developments on Metallurgy and applications of high strength steels: Buenos Aires 2008. Warrendale: TMS, p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  356. Design of highly formable and strong titanium alloys through plasticity induced transformation

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, TMS 2008 Annual Meeting & Exhibition. Cerreta, E., Venkatesh, V. & Evans, D. (eds.). Warrendale, USA: TMS (The Minerals, Metals & Materials Society), p. 357-362 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  357. Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Computational Materials Science. 44, p. 678-689 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  358. Development of a quasi-static test method to investigate the origin of self-healing in ionomers under ballistic conditions

    Varley, R. J. & van der Zwaag, S., 2008, In : Polymer Testing. 27, 1, p. 11-19 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  359. Early stages of oxidation of Ti3AlC2 ceramics

    Song, G., Pei, YT., Sloof, WG., Li, SB., Hosson, T. & van der Zwaag, S., 2008, In : Materials Chemistry and Physics. 112, p. 762-768 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  360. Een nieuwe materiaalkundige benadering voor een duurzame en veilige maatschappij

    van der Zwaag, S., 2008, In : Impulsen voor Economie en Samenleving. p. 21-22 2 p.

    Research output: Contribution to journalArticleProfessional

  361. Fabrication and mechanical properties of electroconductive high temperature ZrC particle-reinforced Ti3AlC2 composites

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2008, In : Journal of Computational and Theoretical Nanoscience. 5, 8, p. 1725-1729 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  362. Genetic alloy design based on thermodynamics and kinetics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, 12, p. 1825-1833 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  363. Heal Thyself - Damage Management by Design

    Mookhoek, SD. & van der Zwaag, S., 2008, In : Plastics Innovations. 1, 44, p. 56-59 4 p.

    Research output: Contribution to journalArticleProfessional

  364. Irreversible thermodynamics modelling of plastic deformation of metals

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2008, In : Materials Science and Technology. 24, 4, p. 495-500 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  365. Isothermal martensitic transformation in a 12Cr-9Ni-4Mo-2Cu stainless steel in applied magnetic fields

    San Martin, D., Aarts, KWP., Rivera Diaz del Castillo, PEJ., van Dijk, NH., Brück, E. & van der Zwaag, S., 2008, In : Journal of Magnetism and Magnetic Materials. 320, p. 1722-1728 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  366. Moisture induced crack filling in barrier coatings containing montmorillonite as an expandable phase

    Micciche, F., Fischer, H., Varley, R. J. & van der Zwaag, S., 2008, In : Surface and Coatings Technology. 202, p. 3346-3353 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  367. Multi-capsule system and its use for encapsulating active agents

    WHITE, S. R., Mookhoek, SD., Fischer, H., van der Zwaag, S., Sottos, N. & Blaiszik, B. J., 2008, IPC No. application, Patent No. ILL19-121-US, Priority date 1 Jan 1800

    Research output: PatentOther research output

  368. Numerical modelling of epidermal wound healing

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2008, Numerical mathematics and advanced applications, proceedings of Enumath 2007. Kunisch, K., Of, G. & Steinbach, O. (eds.). Berlin-Heidelberg: Springer Verlag, p. 83-90 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  369. Ontwikkeling zelfherstellende materialen vertakt in meerdere onderzoekrichtingen

    van der Zwaag, S., 2008, In : Kunststof Magazine. 1, p. 32-34 3 p.

    Research output: Contribution to journalArticleProfessional

  370. Peripherally decorated binary microcapsules containing two liquids

    Mookhoek, SD., Blaiszik, B. J., Fischer, H., Sottos, N., WHITE, S. R. & van der Zwaag, S., 2008, In : Journal of Materials Chemistry. 18, p. 5390-5394 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  371. Polymeric material comprising multiple cavities

    Fischer, H., Mookhoek, SD. & van der Zwaag, S., 2008, IPC No. Nog niet eerder ingevoerd, Patent No. WO2008/125673 A1, Priority date 15 Apr 2008

    Research output: PatentOther research output

  372. Predicting the Strength and Ductility of Ultrafine Grained Interstitial Free Steels Using Irreversible Thermodynamics

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2008, New Developments on Metallurgy and Applications of High Strength Steels Buenos Aires 2008. s.n. (ed.). Buenos Aires: Materials Technology @ TMS, p. 805-812 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  373. Resolving Microstructural Changes during Ageing and Interrupted Ageing Using Thermoelectric Power

    Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, Aluminium Alloys, Proceedings of the 11th International Conference on Aluminium Alloys.. Hirsch, J., Skrotski, B., Gottstein, G. & Skrotzki, B. (eds.). Germany: Wiley VCH Weinheim, p. 763-769 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  374. Self healing of deformation damage in underaged Al-Cu-Mg alloys

    Hautakangas, SM., Schut, H., van Dijk, NH., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Scripta Materialia. 58, p. 719-722 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  375. Strength, deformation, and fracture: A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061.

    Risanti, DD., Rivera Diaz del Castillo, PEJ., Bahrami, A., Miroux, AG. & van der Zwaag, S., 2008, Aluminium alloys, their physical and mechanical properties.. Hirsch, J., Skrotzi, B. & Gottstein, G. (eds.). sl: Wiley-VCH, p. 1457-1463 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  376. Strength-toughness optimisation scenarios through interrupted ageing in AA6061 and AA2024

    Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, Annual TMS Meeting and Exhibition. Yin, W. & Das, S. K. (eds.). Warrendale, USA: Minerals, Metals and Materials Soc, p. 79-84 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  377. The isothermal martensite formation in a maraging steel: a magnetic study

    San Martin, D., van Dijk, NH., Brück, E. & van der Zwaag, S., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 481-482, p. 757-761 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  378. The role of nucleation behaviour in phase field simulations of the austenite to ferrite transformation.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2008, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 39A, p. 1237-1247 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  379. Toughening of a ZrC particle-reinforced Ti3AlC2 composite

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2008, Proceedings of the 32nd international conference & exposition on advanced ceramics and composites. Ohji, T. & Wereszczak, A. (eds.). Daytona Beach, USA: The American ceramic society, p. 31-40 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  380. Towards an understanding of thermally activated self-healing of an ionomer system during ballistic penetration

    Varley, R. J. & van der Zwaag, S., 2008, In : Acta Materialia. 56, 19, p. 5737-5750 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  381. Transformation-induced plasticity in multiphase steels subjected to thermal-mechanical loading

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, p. 3369-3387 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  382. Using Genetic algorithm to design new ultra-high strength stainless steels reinforced by separate precipitate families

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, European Stainless steels conference 2008. Karjalainen, P. & Hertzman, S. (eds.). Stockholm: Swedish Steel producers' Association, p. 259-267 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  383. Verf met klei

    van der Zwaag, S., 2008, In : Delft Integraal. 4, p. 4-4 1 p.

    Research output: Contribution to journalArticleProfessional

  384. Zelfherstellende materialen: een blik in de toekomst

    van der Zwaag, S., 2008, In : Kunststof Magazine. 2, p. 32-35 4 p.

    Research output: Contribution to journalArticleProfessional

  385. 2007
  386. A mathematical approach to epidermal wound healing: Model Analysis and Computer Simulations

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2007, In : Reports of the Department of Applied Mathematical Analysis. 07, 14, p. 1-19 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  387. A new etching route for reveailing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

    San Martin, D., Rivera Diaz del Castillo, PEJ., Peekstok, ER. & van der Zwaag, S., 2007, In : Materials Characterization. 58, p. 455-460 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  388. A novel 2D analysis method to study individual grains using high-energy X-ray microbeam diffraction

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2007, In : Advances in X-Ray Analysis. 51, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  389. A three-dimensional model for particle dissolution in binary alloys.

    Vermolen, FJ., Javierre Perez, E., Vuik, C., Zhao, L. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 767-774 8 p.

    Research output: Contribution to journalArticleScientific

  390. An Introduction to Material Design Principles: Damage Preventation versus Damage Management

    van der Zwaag, S., 2007, Self Healing Materials an Alternative Approach to 20 Centuries of Materials Science. van der Zwaag, S. (ed.). Dordrecht: Springer, p. 1-18 18 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  391. An Investigation of the Self Healing Mechanism of Ionomer Based System

    Varley, R. J. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, AJM. & Zwaag, S. (eds.). Springer, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  392. Barrier free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel

    van Dijk, NH., Offerman, SE., Sietsma, J. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 4489-4498 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  393. Belastingssensor

    van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2007, IPC No. International publication date, Patent No. 1030620, Priority date 11 Jul 2007

    Research output: PatentOther research output

  394. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels.

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 6713-6723 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  395. Crack Healing of Advanced Machinable High Temperature Ti3AlC2 ceramics

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, A. J. M., Schmets, AJM., Zwaag, S. & Zwaag, S. (eds.). Springer, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  396. Een nieuw materiaal ontwerp perspectief: zelf-hertellende materialen

    Mookhoek, SD. & van der Zwaag, S., 2007, In : De Constructeur. 1/2, p. 38-40 3 p.

    Research output: Contribution to journalArticleProfessional

  397. Experimental observations on the correlation between microstructure and fracture of multiphase steels

    Papaefthymiou, S., Prahl, U., Bleck, W., van der Zwaag, S. & Sietsma, J., 2007, In : International Journal of Materials Research. 97, 12, p. 1723-1731 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  398. Ferrite formation during slow continuous cooling in steel.

    Offerman, SE., Stranglund, H., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Poulsen, HF., Agren, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 357-362 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  399. Ionomer for Self Healing Applications

    Varley, R. J. & van der Zwaag, S., 2007, In : Leonardo times. p. 40-41 2 p.

    Research output: Contribution to journalArticleProfessional

  400. Laser beam welding of an Oxide Dispersion Strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  401. Laser beam welding of an oxide dispersion strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 5286-5295 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  402. Laser-ultrasonic monitoring of ferrite recovery in ultra-low carbon steel.

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 458, p. 391-401 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  403. Load Sensor

    van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2007, IPC No. International publication date, Patent No. WO 2007/073184 A1, Priority date 28 Jun 2007

    Research output: PatentOther research output

  404. Martensitic transformation of individual grains in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Scripta Materialia. 56, p. 421-424 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  405. Materials are Forever

    van der Zwaag, S., 2007, In : Kunststof Magazine. p. 30-30 1 p.

    Research output: Contribution to journalArticleProfessional

  406. Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters

    Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Computational Materials Science. 41, p. 107-116 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  407. Micromechanics-based modelling of properties and failure of multiphase steels.

    Prahl, U., Papaefthymiou, S., Uthaisangsuk, V., Bleck, W., Sietsma, J. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 17-22 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  408. Modeling and simulations of transformation-induced plasticity in multiphase carbon steels at micro- and macrfoscopic scales

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, 10th EUROMAT Conference. p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  409. Modelling Chi-Phase Precipitation in High Molybdenum Stainless Steels

    Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Advanced Materials Research. 15-17, p. 531-536 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  410. Modelling Deformation Structures in Metals Based on an Entropic Analysis

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 571-576 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  411. Modelling Dynamic Recovery and Recrystallization of Metals by a New Non-Equilibrium Thermodynamics Approach

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 558, p. 517-522 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  412. Modelling Steady State Deformation of FCC Metals by Non-Equilibrium Thermodynamics

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Technology. 23, 9, p. 1105-1108 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  413. Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe-Cr-Ni-Mo stainless steel

    Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 467, 1-2, p. 24-32 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  414. Modelling of the beta to alpha transformation in a metastable beta Ti alloy based on the kinetics and the morphology of the alpha plates.

    van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2007, In : International Journal of Materials Research. 98, 6, p. 476-484 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  415. On the nature of the growth of bainitic alpha plates in metastable beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 3684-3689 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  416. Onderzoek naar zichzelf reparerende materialen wint aan momentum

    van der Zwaag, S., 2007, In : Kunststof Magazine. 9, p. 32-35 4 p.

    Research output: Contribution to journalArticleProfessional

  417. Oxidation-induced crack healing in Ti3AlC2 ceramics

    Song, G., Pei, YT., Sloof, WG., Li, SB., Hosson, T. & van der Zwaag, S., 2007, In : Scripta Materialia. 58, p. 13-16 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  418. Piezoelectric and mechanical properties of novel composites of PZT and a liquid crytalline thermosetting resin

    van den Ende, D. A., de Almeida, P. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 15, p. 6417-6425 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  419. Positron annihilation spectroscopy as a tool to develop self healing in aluminium alloys

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera, A. & van Dijk, NH., 2007, In : Physica Status Solidi. C: Current Topics in Solid State Physics. 4, 10, p. 3469-3472 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  420. Route to stable non-spherical emulsion droplets

    Bon, SAF., Mookhoek, SD., Colver, PJ., Fischer, H. & van der Zwaag, S., 2007, In : European Polymer Journal. 43, 11, p. 4839-4842 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  421. Self healing materials: An alternative approach to 20 centuries of materials science

    van der Zwaag, S., 2007, Springer. 388 p.

    Research output: Book/ReportBook editingScientificpeer-review

  422. Self-Healing Barrier Coating Using an Expandable Phase

    Micciche, F., Fischer, H., Varley, R. J. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, AJM. & Zwaag, S. (eds.). Springer, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  423. Self-Healing in a NiTi Shape Memory Alloy Particulate Reinforced Aluminum Composite

    Thorat, RR., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, First International Conference on Self Healing. p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  424. Self-heaing Ti4AIC2 ceramic, a promising high temperature material for aerospace engineering

    Song, G. & van der Zwaag, S., 2007, In : Leonardo times. 4, p. 22-23 2 p.

    Research output: Contribution to journalArticleProfessional

  425. Self-healing TI3AIC2 ceramic

    van der Zwaag, S., 2007, In : Leonardo times. p. 22-23 2 p.

    Research output: Contribution to journalArticleProfessional

  426. Solute and second phase evolution during industrial processing of AA3103.

    Miroux, AG., Lok, ZJ., Marthinsen, K. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 281-286 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  427. The Creation of High Aspect Ratio Capsules to Improve the Efficiency of Self-Healing Polymer Systems

    Mookhoek, SD., Colver, PJ., Fischer, H., Bon, SAF. & van der Zwaag, S., 2007, First International Conference on Self Healing. Schmets, A. J. M. & Zwaag, S. (eds.). Springer, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  428. The Role of the Aging Temperature on the Self healing Kinetics in an Underaged AA2024 Aluminium Alloy

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera Diaz del Castillo, PEJ. & van Dijk, NH., 2007, First International Conference on Self Healing. Schmets, A. J. M. & Zwaag, S. (eds.). Springer, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  429. The role of aging temperatures in self healing aluminium alloys

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera, A. & van Dijk, NH., 2007, Proceedings Self Healing Materials conference. Noordwijk, p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  430. Warmwalzstrategien fur IF und TRIP stahle

    Elsner, A., Ponge, D., Raabe, D., Steinhoff, K. & van der Zwaag, S., 2007, 22nd Achener Stahltagung. RWTH Aachen (ed.). Germany: RWTH, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  431. 2006
  432. A comparison of numerical models for one-dimensional Stefan problems

    Javierre Perez, E., Vuik, C., Vermolen, FJ. & van der Zwaag, S., 2006, In : Journal of Computational and Applied Mathematics. 192, p. 445-459 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  433. A first step towards Self Healing in Aluminium alloys

    Hautakangas, SM., Schut, H., Rivera Diaz del Castillo, PEJ., van Dijk, NH. & van der Zwaag, S., 2006, Proceedings International Conference on New Frontiers in Light Metals. L. Katgerman (ed.). Delft: Delft University of Technology, p. 29-38 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  434. A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 595-602 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  435. A suite of sharp interface models for solid-state transformations in alloys

    Vermolen, FJ., Pinson, P., Vuik, C. & van der Zwaag, S., 2006, Proceedings of the ECCOMAS Computational Fluid Dynamics Conference.. Wesseling, P. & Onate, E. (eds.). Delft: Delft University of Technology, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  436. A themostatistical Model for Cell Formation in Two Dimensions

    Rivera Diaz del Castillo, PEJ., Huang, M. & van der Zwaag, S., 2006, TMS Letters, Proceedings of the TMS 2006 Annual Meeting. s.n. (ed.). p. 13-14 2 p. (TMS Letters; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  437. Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling.

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 1431-1440 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  438. Analysis of nucleation and interfacial mobility for polygonal ferrite formation using phase field simulations.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2006, TMS Letters, Proceedings of the TMS 2006 Annual Meeting. Thoma, D. (ed.). USA: TMS, p. 15-16 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  439. Chapter 14: Modelling microchemistry. Simulation of alloy effects in aluminium

    Miroux, AG., Lok, ZJ., Anselmino, E. & van der Zwaag, S., 2006, Virtual Fabrication of Aluminium Products. Microstructural Modelling in Industrial Aluminium Fabrication Processes. J. Hirsch (ed.). Weinheim: Wiley-VCH, p. 199-212 14 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  440. Evolution of the mixed-mode character of solid-state phase transformations in metals involving solute partitioning.

    Sietsma, J., Mecozzi, MG., van Bohemen, SMC. & van der Zwaag, S., 2006, In : Zeitschrift fuer Metallkunde. 97, 4, p. 356-361 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  441. Experimental observations elucidating the mechanisms of structural bcc-hcp transformations in beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2006, In : Physical Review B (Condensed Matter and Materials Physics). 74, 13, p. 134114-1-13114-10

    Research output: Contribution to journalArticleScientificpeer-review

  442. Fibre metal laminates and constructions provided therewith

    van Rooijen, RGJ. & van der Zwaag, S., 2006, IPC No. Aangevraagd door TU Delft, Patent No. WO 2006/123928 A1, Priority date 23 Nov 2006

    Research output: PatentOther research output

  443. Higher dimensional numerical simulations of precipitate dissolution in multi-component aluminium alloys

    Javierre Perez, E., Vuik, C., Vermolen, FJ., Segal, A. & van der Zwaag, S., 2006, Proceedings of the ECCOMAS Computational Fluid Dynamics Conference.. Wesseling, P. & Onate, E. (eds.). Delft: Delft University of Technology, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  444. In-situ SEM observations of moving interfaces during recrystallisation

    van der Zwaag, S., Anselmino, E., Miroux, AG. & Prior, D. J., 2006, In : Materials Science Forum. 519-521, p. 1341-1348 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  445. Influence of concurrent precipitation on the nucleation kinetics during recrystallisation in AA3003

    Chen, SP., Miroux, AG. & van der Zwaag, S., 2006, In : Materials Science Forum. 519-521, p. 1605-1610 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  446. Laser-ultrasonic monitoring of austenite recrystallization in C-MN steel

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2006, In : ISIJ International. 46, 8, p. 1223-1232 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  447. Martensitic transformation of individual grains in multiphase metallic systems

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2006, In : Scripta Materialia.

    Research output: Contribution to journalArticleScientificpeer-review

  448. Modeling recrystallization kinetics in AA1050 following simulated break-down rolling

    Chen, SP. & van der Zwaag, S., 2006, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 37A, p. 2859-2869 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  449. Modelling Steady State Deformation in Metals by a Novel Thermostatistical Approach

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2006, Materials Proceeding of Materials Science and Technology 2006 conference and Exhibition. s.n. (ed.). Warrendale, PA 15086: The Minerals, Metals & Materials Society (TMS), p. 373-382 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  450. Modelling dispersoid precipitation during recrystallisation in AA3103.

    Lok, ZJ., Miroux, AG. & van der Zwaag, S., 2006, In : Materials Science Forum. 519-521, p. 443-448 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  451. Modelling of the effects of grain orientation on transformation-induced plasticity in multiphase carbon steels

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2006, In : Modelling and Simulation in Materials Science and Engineering. 14, p. 617-636 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  452. Modelling the stress relaxation kinetics of intercritically deformed austenite and ferrite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 603-613 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  453. Modification of a thermomechanical model to predict constitutive behavior of Al-Mg-Si alloys.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 2006, In : Journal of Materials Engineering and Performance. 15, 6, p. 632-639 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  454. Navormbare PZT-LCT sensoren met hoge gevoeligheid en thermo-chemische stabilteit

    van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2006, IPC No. Aanvrager TU-Delft, Patent No. NL 466885-VB, Priority date 8 Dec 2006

    Research output: PatentOther research output

  455. Phase transformations in steel studied by 3DXRD-microscopy

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2006, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 246, p. 194-200 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  456. The Level Set Method for Solid-Solid Phase Transformations

    Javierre Perez, E., Vuik, C., Vermolen, FJ., Segal, A. & van der Zwaag, S., 2006, Proceedings of ENUMATH 2005. Bermudez de Castro, A. & Gomez, D. (eds.). Berlin: Springer, p. 712-719 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  457. The bearing strength of fibre metal laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2006, In : Journal of Composite Materials. 40, 1, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  458. Three-dimensional phase field modelling of the austenite-to-ferrite transformation.

    Militzer, M., Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 3961-3972 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  459. 2005
  460. 3DXRD microscopy for the study of solid-state phase transformation kinetics.

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  461. An integrated study on the effect of pre- and post-extrusion heat treatments and surface treatment on the filiform corrosion properties of an aluminium extrusion alloy

    Mol, JMC., van de Langkruis, J., de Wit, JHW. & van der Zwaag, S., 2005, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, 11, p. 2711-2730 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  462. Analysis of the y - a transformation in a C-Mn steel by phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2005, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 36A, (9), p. 2327-2340 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  463. Application of the energy release rate approach for delamination growth in Glare

    Alderliesten, RC., Schijve, J. & van der Zwaag, S., 2005, In : Engineering Fracture Mechanics. p. 1-13 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  464. Contribution to the understanding of austenite stability in a 12Cr-9Ni-4Mo maraging steel

    San Martin, D., van Dijk, NH., Yagodzinsky, Y., Brück, E. & van der Zwaag, S., 2005, In : Materials Science Forum. 500-501, p. 339-346 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  465. Cross-diffusion controlled particle dissolution in metallic alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2005, In : Computing and Visualization in Science. 8, 1, p. 27-33 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  466. Dilatometric investigations on the decomposition of austenite in two medium-carbon steels with and without Cr and Mo additions

    Mertens, AIM., Brown, AJ., Zhao, L., McDermid, JR., van der Zwaag, S. & Sietsma, J., 2005, Material Science & Technology 2004. Baker, M. A. (ed.). Warrendale: Association for Iron & Steel Technology, p. 187-198 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  467. Effect of Strain Rate on the Subsequent Softening and Precipitation Kinetics in a Nb-Microalloyed Steel

    Luo, H., Qin, Y., Sietsma, J. & van der Zwaag, S., 2005, In : Steel Research International. 09, 76, p. 650-655 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  468. Ferrite/pearlite band prevention in dual phase and TRIP steels: Model development

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2005, In : ISIJ International. 45, 3, p. 380-387 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  469. Highlights of designing with Hylite - a new material concept

    Burchitz, I., boesenkool, B., van der Zwaag, S. & Tassoul, M., 2005, Delft Science in Design - A congress on Interdisciplinary Design. Mick Eekhout (ed.). Delft: Faculty of Architecture, p. 29-42 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  470. Improving the adhesion of thin stainless steel sheets for fibre metal laminates (FML) applications

    van Rooijen, RGJ., Sinke, J. & van der Zwaag, S., 2005, In : Journal of Adhesion Science and Technology. 19, p. 1387-1396 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  471. Improving the adhesion of thing stainless steel sheets for fibre metal laminate (FML) applications

    van Rooijen, RGJ., Sinke, J. & van der Zwaag, S., 2005, In : Journal of Adhesion Science and Technology. 19, 16, p. 1387-1396 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  472. In situ x-ray diffraction measurements of deformation-induced austenite to martensite transformation in a multiphase TRIP steel

    Zhao, L., van der Pers, NM., Sietsma, J. & van der Zwaag, S., 2005, In : Materials Science Forum. 500-501, p. 379-386 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  473. In-situ observations of recrystallisation in AA3103.

    Anselmino, E., Prior, D. J., Miroux, AG. & van der Zwaag, S., 2005.

    Research output: Contribution to conferencePosterProfessional

  474. Investigation of ferrite softening process in a 0.2 wt% C 1.5 wt% Mn steel after hot deformation

    Smith, A., Hanlon, DN., Luo, H., Sietsma, J. & van der Zwaag, S., 2005, Solid State Transformation and Heat Treatment. s.n. (ed.). Weinheim: Wiley-VCH Verlag, p. 175-180 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  475. Magnetically assisted martensitic transformation in a 12Cr-9Ni maraging steel

    San Martin, D., van Dijk, NH., Brück, E. & van der Zwaag, S., 2005, Proceedings of Stainless Steel World 2005. Donald Wiedemeyer, KCI. W. & Thierry Cassagne, C. (eds.). Zutphen: KCI Publishing, p. 374-379 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  476. Micro-scale Strain Distribution in Hot-worked Duplex Stainless Steel

    Hernandez castillo, L. E., Beynon, JH., Pinna, C. & van der Zwaag, S., 2005, In : Steel Research International. 76, 2/3, p. 137-141 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  477. Modeling nucleation and growth in multiphase steel using recent in-situ observations

    Offerman, SE., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2005, Modellierung und Simulation von Prozessen der Stahlerzeugung und Stahlverarbeitung. R., K. (ed.). Freiberg: TU Bergakademie, p. 97-112 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  478. Modeling of the transformation kinetics of the beta to alpha + beta transformation in Ti-4.5Fe-6.8Mo-1.5Al based on dilatometric results and the morphology of the alpha plates

    van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2005, Modeling and Simulation of Titanium Technology: Theory and Practices. Ellen Cerreta, Vasisht Venkatesh, F. Dax & Jaimie Tiley (eds.). Pittsburgh: TMS Publications, p. 63-77 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  479. Modelling the Deformation of Ultra Fine Grained Metals Using Statistical Mechanics Concepts

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2005, In : Iron & Steel. 40, p. 60-65 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  480. Phase field modelling of the interfacial condition at the moving interphase during the y - a transformation in C-Mn steels

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2005, In : Computational Materials Science. 34, 3, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  481. Review on some Stefan Problems for Particle Dissolution in Solid Metallic Alloys

    Vermolen, FJ., Vuik, C., Javierre Perez, E. & van der Zwaag, S., 2005, In : Nonlinear Analysis: modelling and control (online). 10, 3, p. 257-292 36 p.

    Research output: Contribution to journalArticleScientific

  482. Tailoring of Ostwald ripening behaviour in multicomponent Al alloys

    Rivera Diaz del Castillo, PEJ., Reischig, P. & van der Zwaag, S., 2005, In : Scripta Materialia. 52, 8, p. 705-708 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  483. The bearing strenght of Fiber Metal Laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2005, In : Journal of Composite Materials. 40, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  484. The dependence of the B-AlFeSi to x-Al(FeMn)Si transformation kinetics in Al-Mg-Si alloys on the alloying elements

    Kuijpers, NCW., Vermolen, FJ., Vuik, C., Koenis, PTG., Nilsen, KE. & van der Zwaag, S., 2005, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 395, p. 9-19 11 p.

    Research output: Contribution to journalArticleScientific

  485. Theory for diffusional transformation kinetics: Multicomponent and multiphase systems

    Rivera Diaz del Castillo, PEJ., Reischig, P., Xu, W. & van der Zwaag, S., 2005, In : Scripta Materialia. 53, 9, p. 1089-1094 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  486. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling

    van Dijk, NH., Butt, AM., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2005, In : Acta Materialia. 53, p. 5439-5447 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  487. 2004
  488. A Statistical Mechanics Theory of Grain Deformation and its Prediction of Dynamical Recovery and Recrystallization

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 87-92 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  489. A comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of AA1050

    Chen, SP. & van der Zwaag, S., 2004, In : Journal of Testing and Evaluation. 32, 4, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  490. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  491. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  492. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  493. A model of the beta-AlFeSi to alpha-A1(FeMn)Si transformation during homogenization in 6xxx alloys

    Vermolen, FJ., Kuijpers, NCW., Vuik, C., Koenis, PTG., Nilsen, K. E. & van der Zwaag, S., 2004, Proceedings of the Eight international aluminum extrusion technology seminar. Rajski, GT. (ed.). Wouconda, Ill, US: ET Foundation, p. 57-65 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  494. A morphological study of filiform corrosive attack on cerated AA2024-T351 alluminium alloy

    Hughes, A. E., Mol, JMC., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, p. 107-124 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  495. A morphological study of filiform corrosive attack on chromated and alkaline-cleaned AA2024-T351 aluminium alloy

    Mol, JMC., Hughes, A. E., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 46, 5, p. 1201-1224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  496. A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 9, p. 2789-2797 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  497. A quantitative description of multicomponent growth of needle-shaped prcipitates in non-ideal solutions

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, 10th World Conference on Titanium. Prof. Dr. G. Lutjering & Prof.Dr. J. Albrecht (eds.). Weinheim: Wiley-VCH Verlag, p. 1083-1089 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  498. A single grain approach applied to the modeling of recrystallization kinetics for cold rolled single-phase metals

    Chen, SP. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35(A), 3, p. 741-749 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  499. Advanced models for particle dissolution in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, Solid state transformation and heat treatment, part 1: Precipitation and diffusion processes. Hazotte, A. (ed.). Weinheim: Wiley-VCH, p. 53-61 8 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

Previous 1 2 Next

ID: 142717