1. 2016
  2. Autonomous filling of grain-boundary cavities during creep loading in Fe-Mo alloys

    Zhang, S., Fang, H., Gramsma, M. E., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Brück, E., van der Zwaag, S., van Dijk, N. H. & More Authors, 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 10, p. 4831-4844

    Research output: Contribution to journalArticleScientificpeer-review

  3. Characterization of self-healing polymers - From healing tests to the mechanism

    Bode, S., Enke, M., Hernandez Santana, M., Bose, RK., Grande, AM., Garcia Espallargas, SJ., van der Zwaag, S., Schubert, US. & Hager, MD., 2016, Advances in Polymer Science. Dordrecht: Springer, Vol. 273. p. 113-142

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  4. Computational modeling of structure formation during dielectrophoresis in particulate composites

    Gutierrez, MA., Khanbareh, H. & van der Zwaag, S., 2016, In : Computational Materials Science. 112, February, p. 139-146 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Demonstrating the self-healing behaviour of some selected ceramics under combustion chamber conditions

    Farle, A., Boatemaa, L., Shen, L., Gövert, S., Kok, J. B. W., Bosch, M., Yoshioka, S., Van Der Zwaag, S. & Sloof, W. G., 2016, In : Smart Materials and Structures. 25, 8, 10 p., 084019.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Effect of curing on the mechanical and healing behaviour of a hybrid dual network: A time resolved evaluation

    Abdolah Zadeh, M., Grande, A. M., Van Der Zwaag, S. & Garcia, S. J., 2016, In : RSC Advances. 6, 94, p. 91806-91814 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Enhancing energy harvesting potential of (K,Na,Li)NbO3-epoxy composites via Li substitution

    Deutz, D. B., Mascarenhas, N. T., van der Zwaag, S. & Groen, W. A., 2016, In : Journal of the American Ceramic Society. 100, 3, p. 1108–1117 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Healing of Early Stage Fatigue Damage in Ionomer/Fe3O4 Nanoparticle Composites

    Post, W., Bose, R., Garcia Espallargas, S. & van der Zwaag, S., 2016, In : Polymers. 8, 12, 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. High Piezoelectric Voltage Coefficient in Structured Lead-Free (K,Na,Li)NbO3 Particulate—Epoxy Composites

    Kunnamkuzhakkal James, N., Deutz, D. B., Bose, R. K., van der Zwaag, S. & Groen, P., 2016, In : Journal of the American Ceramic Society. 99, 12, p. 3957-3963 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. High-throughput design of low-activation, high-strength creep-resistant steels for nuclear-reactor applications

    Lu, Q., van der Zwaag, S. & Xu, W., 2016, In : Journal of Nuclear Materials. 469, February, p. 217-222 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Influence of embedded MoSi2 particles on the high temperature thermal conductivity of SPS produced yttria-stabilised zirconia model thermal barrier coatings

    Kulczyk-Malecka, J., Zhang, X., Carr, J., Carabat, A. L., Sloof, W. G., van der Zwaag, S., Cernuschi, F., Nozahic, F., Monceau, D., Estournès, C., Withers, P. J. & Xiao, P., 2016, In : Surface and Coatings Technology. 308, p. 31-39

    Research output: Contribution to journalArticleScientificpeer-review

  12. Monitoring Network and Interfacial Healing Processes by Broadband Dielectric Spectroscopy: A Case Study on Natural Rubber

    Hernandez Santana, M., Grande, A., van der Zwaag, S. & Garcia Espallargas, S., 2016, In : ACS Applied Materials and Interfaces. p. 10647-10656

    Research output: Contribution to journalArticleScientificpeer-review

  13. On the transition between grain boundary ferrite and bainitic ferrite in Fe-C-Mo and Fe-C-Mn alloys: The bay formation explained

    Chen, H., Yang, Z., Zhang, C., Zhu, K. & van der Zwaag, S., 2016, In : Acta Materialia. 104, February, p. 62-71 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. On the use of TiC as high-temperature healing particles in alumina based composites

    Yoshioka, S., Boatemaa, L., Zwaag, S. V. D., Nakao, W. & Sloof, W. G., 2016, In : Journal of the European Ceramic Society. 36, 16, p. 4155-4162

    Research output: Contribution to journalArticleScientificpeer-review

  15. Predicting the Transition between Upper and Lower Bainite via a Gibbs Energy Balance Approach

    Yang, Z., Xu, W., Yang, Z., Zhang, C., Chen, H. & van der Zwaag, S., 2016, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Reducing the erosive wear rate of Cr2AlC MAX phase ceramic by oxidative healing of local impact damage

    Shen, L., Eichner, D., van der Zwaag, S., Leyens, C. & Sloof, W. G., 2016, In : Wear. 358-359, p. 1-6

    Research output: Contribution to journalArticleScientificpeer-review

  17. Repeated crack healing in MAX-phase ceramics revealed by 4D in situ synchrotron X-ray tomographic microscopy

    Sloof, WG., Pei, R., McDonald, SA., Fife, JL., Shen, L., Boatemaa, L., Farle, AS., Yan, K., Zhang, X., van der Zwaag, S., Lee, PD. & Withers, PJ., 2016, In : Scientific Reports. 6, p. 1 - 9 23040 .

    Research output: Contribution to journalArticleScientificpeer-review

  18. Selection of healing agents for autonomous healing of alumina at high temperatures

    Boatemaa, L., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2016, In : Journal of the European Ceramic Society. 36, 16, p. 4141-4145

    Research output: Contribution to journalArticleScientificpeer-review

  19. Self-Healing Corrosion-Protective Sol–Gel Coatings Based on Extrinsic and Intrinsic Healing Approaches

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, Self-healing Materials. Hager, M. D., van der Zwaag, S. & Schubert, U. S. (eds.). Springer, Cham, Vol. 273. p. 1-34 (Advances in Polymer Science).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  20. The Effect of Interfacial Element Partitioning on Ferrite and Bainite Formation

    Chen, H. & van der Zwaag, S., 2016, In : JOM. p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. The effect of ferrite-martensite morphology on the scratch and abrasive wear behaviour of a dual phase construction steel

    Xu, X., van der Zwaag, S. & Xu, W., 2016, In : Wear. 348-349, February, p. 148-157 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 12 3 4 5 6 7 8 9 ...39 Next

ID: 142717