1. 2016
  2. Monitoring Network and Interfacial Healing Processes by Broadband Dielectric Spectroscopy: A Case Study on Natural Rubber

    Hernandez Santana, M., Grande, A., van der Zwaag, S. & Garcia Espallargas, S., 2016, In : ACS Applied Materials and Interfaces. p. 10647-10656

    Research output: Contribution to journalArticleScientificpeer-review

  3. On the transition between grain boundary ferrite and bainitic ferrite in Fe-C-Mo and Fe-C-Mn alloys: The bay formation explained

    Chen, H., Yang, Z., Zhang, C., Zhu, K. & van der Zwaag, S., 2016, In : Acta Materialia. 104, February, p. 62-71 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. On the use of TiC as high-temperature healing particles in alumina based composites

    Yoshioka, S., Boatemaa, L., Zwaag, S. V. D., Nakao, W. & Sloof, W. G., 2016, In : Journal of the European Ceramic Society. 36, 16, p. 4155-4162

    Research output: Contribution to journalArticleScientificpeer-review

  5. Predicting the Transition between Upper and Lower Bainite via a Gibbs Energy Balance Approach

    Yang, Z., Xu, W., Yang, Z., Zhang, C., Chen, H. & van der Zwaag, S., 2016, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Reducing the erosive wear rate of Cr2AlC MAX phase ceramic by oxidative healing of local impact damage

    Shen, L., Eichner, D., van der Zwaag, S., Leyens, C. & Sloof, W. G., 2016, In : Wear. 358-359, p. 1-6

    Research output: Contribution to journalArticleScientificpeer-review

  7. Repeated crack healing in MAX-phase ceramics revealed by 4D in situ synchrotron X-ray tomographic microscopy

    Sloof, WG., Pei, R., McDonald, SA., Fife, JL., Shen, L., Boatemaa, L., Farle, AS., Yan, K., Zhang, X., van der Zwaag, S., Lee, PD. & Withers, PJ., 2016, In : Scientific Reports. 6, p. 1 - 9 23040 .

    Research output: Contribution to journalArticleScientificpeer-review

  8. Selection of healing agents for autonomous healing of alumina at high temperatures

    Boatemaa, L., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2016, In : Journal of the European Ceramic Society. 36, 16, p. 4141-4145

    Research output: Contribution to journalArticleScientificpeer-review

  9. Self-Healing Corrosion-Protective Sol–Gel Coatings Based on Extrinsic and Intrinsic Healing Approaches

    Abdolah Zadeh, M., van der Zwaag, S. & Garcia Espallargas, SJ., 2016, Self-healing Materials. Hager, M. D., van der Zwaag, S. & Schubert, U. S. (eds.). Springer, Vol. 273. p. 1-34 (Advances in Polymer Science).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  10. The Effect of Interfacial Element Partitioning on Ferrite and Bainite Formation

    Chen, H. & van der Zwaag, S., 2016, In : JOM. p. 1-9 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. The effect of ferrite-martensite morphology on the scratch and abrasive wear behaviour of a dual phase construction steel

    Xu, X., van der Zwaag, S. & Xu, W., 2016, In : Wear. 348-349, February, p. 148-157 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. The effect of martensite volume fraction on the scratch and abrasion resistance of a ferrite-martensite dual phase steel

    Xu, X., van der Zwaag, S. & Xu, W., 2016, In : Wear. 348-349, February, p. 80-88 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Towards self-healing creep resistant steels

    van der Zwaag, S., Zhang, S., Fang, H., Brück, E. & van Dijk, NH., 2016, Proceedings of the 7th international conference on creep, fatigue and creep-fatigue interaction, CF-7. s.n. (ed.). s.l.: s.n., p. 85-90 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  14. Zelfhelende materialen fixen het zelf: Behoren onderhoud en reparatie straks tot het verleden? Door Marga van Zundert

    van der Zwaag, S., Jonkers, HM., van Benthem, R., Dry, C. & White, S., 2016, In : Chemie Magazine. 28, 2, p. 12-15 4 p.

    Research output: Contribution to journalArticleProfessional

  15. 2015
  16. Application of the extended geb model to predict the shape and fraction evolution of ferrite as a function of the transformation temperature for a lean steel containing 1.9 W.T. % Mn

    Yang, Z., Xu, W., Yang, Z. & Van Der Zwaag, S., 1 Jan 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 77-78 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  17. The effect of alloying element partitioning on the interface velocity during the isothermal bainite formation

    Farahani, H., Xu, W. & Van Der Zwaag, S., 1 Jan 2015, p. 925-926. 2 p.

    Research output: Contribution to conferenceAbstractScientific

  18. A conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage

    Farle, AM., Kwakernaak, C., van der Zwaag, S. & Sloof, WG., 2015, In : Journal of the European Ceramic Society. 35, 1, p. 37-45 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels

    Xu, X., van der Zwaag, S. & Xu, W., 2015, In : Wear. 322-323, January, p. 51-60 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. A temperature oscillation instrument to determine pyroelectric properties of materials at low frequencies: Towards elimination of lock-in methods

    Khanbareh, H., Schelen, JBJ., van der Zwaag, S. & Groen, WA., 2015, In : Review of Scientific Instruments. 86, 10, p. 105111-1-105111-5

    Research output: Contribution to journalArticleScientificpeer-review

  21. Acylhydrazones as reversible covalent crosslinkers for self-healing polymers

    Kuhl, N., Bode, S., Bose, RK., Vitz, J., Seifert, A., Hoeppener, S., Garcia Espallargas, SJ., Spange, S., van der Zwaag, S., Hager, MD. & Schubert, US., 2015, In : Advanced Functional Materials. 25, 22, p. 3295-3301 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1...3 4 5 6 7 8 9 10 ...40 Next

ID: 142717