1. 2019
  2. Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel

    Shen, C., Wang, C., Wei, X., Li, Y., van der Zwaag, S. & Xu, W., 15 Oct 2019, In : Acta Materialia. 179, p. 201-214 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Direct TEM observation of α/γ interface migration during cyclic partial phase transformations at intercritical temperatures in an Fe-0.1C −0.5Mn alloy

    Nutter, J., Farahani, H., Rainforth, W. M. & van der Zwaag, S., 1 Oct 2019, In : Acta Materialia. 178, p. 68-78 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Damage evolution in a self-healing air plasma sprayed thermal barrier coating containing self-shielding MoSi 2 particles

    Chen, Y., Zhang, X., van der Zwaag, S., Sloof, W. G. & Xiao, P., 1 Aug 2019, In : Journal of the American Ceramic Society. 102, 8, p. 4899-4910 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. 3D-printed Perforated Trailing Edges for Broadband Noise Abatement

    Rubio Carpio, A., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, 25th AIAA/CEAS Aeroacoustics Conference: 20-23 May 2019 Delft, The Netherlands. AIAA, 13 p. AIAA 2019-2458

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. A deconvolution protocol of the mechanical relaxation spectrum to identify and quantify individual polymer feature contributions to self-healing

    Montano, V., Picken, S. J., Van Der Zwaag, S. & Garcia, S. J., 2019, In : Physical Chemistry Chemical Physics. 21, 19, p. 10171-10184 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2019, In : Fatigue and Fracture of Engineering Materials and Structures. 42, 2, p. 533-545 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Computational investigation of porosity effects on fracture behavior of thermal barrier coatings

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 2019, In : Ceramics International. 45, 16, p. 20518-20527 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Determination of mode switching in cyclic partial phase transformation in Fe-0.1C-xMn alloys as a function of the Mn concentration

    Farahani, H., Xu, W. & van der Zwaag, S., 2019, In : JOM. 71, 4, p. 1313 - 1321

    Research output: Contribution to journalArticleScientificpeer-review

  10. Experimental characterization of the turbulent boundary layer over a porous trailing edge for noise abatement

    Rubio Carpio, A., Merino Martínez, R., Avallone, F., Ragni, D., Snellen, M. & van der Zwaag, S., 2019, In : Journal of Sound and Vibration. 443, p. 537-558 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Flexible Lead-Free Piezoelectric Composite Materials for Energy Harvesting Applications

    Stuber, V. L., Deutz, D. B., Bennett, J., Cannel, D., de Leeuw, D. M., van der Zwaag, S. & Groen, P., 2019, In : Energy Technology. 7, 1, p. 177-185 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. In situ high-temperature EBSD and 3D phase field studies of the austenite-ferrite transformation in a medium Mn steel

    Farahani, H., Zijlstra, G., Mecozzi, M. G., Ocelík, V., De Hosson, J. T. M. & Van Der Zwaag, S., 2019, In : Microscopy and Microanalysis. 25, 3, p. 639-655

    Research output: Contribution to journalArticleScientificpeer-review

  13. Kinetics of zircon formation in yttria partially stabilized zirconia as a result of oxidation of embedded molybdenum disilicide

    Nozahic, F., Carabat, A. L., Mao, W., Monceau, D., Estournes, C., Kwakernaak, C., van der Zwaag, S. & Sloof, W. G., 2019, In : Acta Materialia. 174, p. 206-216

    Research output: Contribution to journalArticleScientificpeer-review

  14. Self healing of creep damage in iron-based alloys by supersaturated tungsten

    Fang, H., Szymanski, N., Versteylen, C. D., Cloetens, P., Kwakernaak, C., Sloof, W. G., Tichelaar, F. D., Balachandran, S., Herbig, M., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2019, In : Acta Materialia. 166, p. 531-542

    Research output: Contribution to journalArticleScientificpeer-review

  15. Synthesis, crystal structure, microstructure and mechanical properties of (Ti1-xZrx)3SiC2 MAX phase solid solutions

    Qu, L., Bei, G., Stelzer, B., Rueß, H., Schneider, J. M., Cao, D., van der Zwaag, S. & Sloof, W. G., 2019, In : Ceramics International. 45, 1, p. 1400-1408

    Research output: Contribution to journalArticleScientificpeer-review

  16. Ultra-high temperature ablation behavior of MoAlB ceramics under an oxyacetylene flame

    Bei, G., van der Zwaag, S., Kota, S., Barsoum, M. W. & Sloof, W. G., 2019, In : Journal of the European Ceramic Society. 39, 6, p. 2010-2017

    Research output: Contribution to journalArticleScientificpeer-review

  17. 2018
  18. Modelling the fracture behaviour of thermal barrier coatings containing healing particles

    Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. & van der Zwaag, S., 5 Nov 2018, In : Materials and Design. 157, p. 75-86 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Identifying the Role of Primary and Secondary Interactions on the Mechanical Properties and Healing of Densely Branched Polyimides

    Susa, A., Mordvinkin, A., Saalwächter, K., Van Der Zwaag, S. & Garcia, S. J., 15 Oct 2018, In : Macromolecules. 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. A Computational Design Study of Self-healing Creep Resistant Steels

    Fu, Y., van Dijk, N. & van der Zwaag, S., 12 Oct 2018. 1 p.

    Research output: Contribution to conferencePosterScientific

  21. Routes to Make Natural Rubber Heal: A Review

    Hernández Santana, M., den Brabander, M., García, S. & van der Zwaag, S., 2 Oct 2018, In : Polymer Reviews. 58, 4, p. 585-609 25 p.

    Research output: Contribution to journalReview articleScientificpeer-review

  22. Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy

    Dong, H., Chen, H., Wang, W., Zhang, Y., Miyamoto, G., Furuhara, T., Zhang, C., Yang, Z. & van der Zwaag, S., 1 Oct 2018, In : Acta Materialia. 158, p. 167-179 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. On the Relationship between the Chromium Concentration, the Z-Phase Formation and the Creep Strength of Ferritic-Martensitic Steels

    Yu, H., Xu, W. & van der Zwaag, S., 1 Oct 2018, In : Steel Research International. 89, 10, 8 p., 1800177.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Self-Healing Materials are Coming of Age

    Leeuwenburgh, S. C. G., De Belie, N. & van der Zwaag, S., 7 Sep 2018, In : Advanced Materials Interfaces. 5, 17, 3 p., 1800736.

    Research output: Contribution to journalEditorialScientific

  25. A translation of the structure of mussel byssal threads into synthetic materials by the utilization of histidine-rich block copolymers

    Enke, M., Bose, R. K., Zechel, S., Vitz, J., Deubler, R., Garcia, S. J., Van Der Zwaag, S., Schacher, F. H., Hager, M. D. & Schubert, U. S., 7 Jul 2018, In : Polymer Chemistry. 9, 25, p. 3543-3551 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Effect of C and N and their absence on the kinetics of austenite-ferrite phase transformations in Fe-0.5Mn alloy

    Farahani, H., Zurob, H., Hutchinson, C. R. & van der Zwaag, S., 15 May 2018, In : Acta Materialia. 150, p. 224-235 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Analysis and experimental validation of the figure of merit for piezoelectric energy harvesters

    Deutz, D. B., Pascoe, J. A., Schelen, B., Van Der Zwaag, S., De Leeuw, D. M. & Groen, P., 1 May 2018, In : Materials Horizons. 5, 3, p. 444-453 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Self-Healing Phenomena in Metals

    van Dijk, N. & van der Zwaag, S., 1 Jan 2018, In : Advanced Materials Interfaces. 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. A Novel Approach for Controlling the Band Formation in Medium Mn Steels

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 6, p. 1998–2010 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. A cohesive-zone crack healing model for self-healing materials

    Ponnusami, S. A., Krishnasamy, J., Turteltaub, S. & van der Zwaag, S., 2018, In : International Journal of Solids and Structures. 134, p. 249-263

    Research output: Contribution to journalArticleScientificpeer-review

  31. An in-situ LSCM study on bainite Formation in a Fe-0.2C-1.5Mn-2.0Cr Alloy

    Sainis, S., Farahani, H., Gamsjäger, E. & van der Zwaag, S., 2018, In : Metals. 8, 7, 22 p., 498.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Analysis of the grain size evolution for ferrite formation in Fe-C-Mn steels using a 3D model under a mixed-mode interface condition

    Fang, H., Mecozzi, M. G., Brück, E., van der Zwaag, S. & van Dijk, N. H., 2018, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 49, 1, p. 41-53

    Research output: Contribution to journalArticleScientificpeer-review

  33. Autonomous high-temperature healing of surface cracks in Al2O3 containing Ti2AlC particles

    Boatemaa, L., Bosch, M., Farle, A. S., Bei, G. P., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the American Ceramic Society. 101, 12, p. 5684-5693

    Research output: Contribution to journalArticleScientificpeer-review

  34. In Situ 3D Neutron Depolarization Study of the Transformation Kinetics and Grain Size Evolution During Cyclic Partial Austenite-Ferrite Phase Transformations in Fe-C-Mn Steels

    Fang, H., van der Zwaag, S. & van Dijk, N. H., 2018, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. In-situ EBSD observations of moving austenite-ferrite interfaces during intercritical annealing

    van der Zwaag, S., Farahani, H., Zijlstra, G., Mecozzi, P., Ocelik, V. & de Hosson, J., 2018. 1 p.

    Research output: Contribution to conferencePosterScientific

  36. Predicting the cooperative effect of Mn–Si and Mn–Mo on the incomplete bainite formation in quaternary Fe–C alloys

    Farahani, H., Xu, W. & van der Zwaag, S., 2018, In : Philosophical Magazine Letters. 98, 4, p. 161-171

    Research output: Contribution to journalArticleScientificpeer-review

  37. Protecting the MoSi2 healing particles for thermal barrier coatings using a sol-gel produced Al2O3 coating

    Carabat, A. L., Meijerink, M. J., Brouwer, J. C., Kelder, E. M., van Ommen, J. R., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of the European Ceramic Society. 38, 7, p. 2728-2734

    Research output: Contribution to journalArticleScientificpeer-review

  38. Self-healing of Al2O3 containing Ti microparticles

    Boatemaa, L., van der Zwaag, S. & Sloof, W. G., 2018, In : Ceramics International. 44, 10, p. 11116-11126

    Research output: Contribution to journalArticleScientificpeer-review

  39. Self-healing thermal barrier coating systems fabricated by spark plasma sintering

    Nozahic, F., Estournès, C., Carabat, A. L., Sloof, W. G., van der Zwaag, S. & Monceau, D., 2018, In : Materials & Design. 143, p. 204-213

    Research output: Contribution to journalArticleScientificpeer-review

  40. Special Issue: Self‐Healing Materials

    Leeuwenburgh, S. C. G., De Belie, N. & van der Zwaag, S., 2018, In : Advanced Materials Interfaces. 5, 17

    Research output: Contribution to journalSpecial issueScientific

  41. Synergetic active corrosion protection of AA2024-T3 by 2D- anionic and 3D-cationic nanocontainers loaded with Ce and mercaptobenzothiazole

    Abdolahzadeh, M., Tedim, J., Zheludkevich, M., van der Zwaag, S. & Garcia, S. J., 2018, In : Corrosion Science: the journal on environmental degradation of materials and its control. 135, p. 35-45

    Research output: Contribution to journalArticleScientificpeer-review

  42. The effect of the TiC particle size on the preferred oxidation temperature for self-healing of oxide ceramic matrix materials

    Boatemaa, L., Brouwer, H., van der Zwaag, S. & Sloof, W. G., 2018, In : Journal of Materials Science. 53, 8, p. 5973-5986

    Research output: Contribution to journalArticleScientificpeer-review

  43. Thermo – mechanical properties of SPS produced self-healing thermal barrier coatings containing pure and alloyed MoSi2 particles

    Kulczyk-Malecka, J., Zhang, X., Carr, J., Nozahic, F., Estournès, C., Monceau, D., Carabat, A. L., Sloof, W. G., van der Zwaag, S., Withers, P. J. & Xiao, P., 2018, In : Journal of the European Ceramic Society. 38, 12, p. 4268-4275

    Research output: Contribution to journalArticleScientificpeer-review

  44. 2017
  45. A New Approach Toward Metal-Free Self-Healing Ionomers Based on Phosphate and Methacrylate Containing Copolymers

    Dahlke, J., Bose, R. K., Zechel, S., Garcia, S. J., van der Zwaag, S., Hager, M. D. & Schubert, U. S., 1 Dec 2017, In : Macromolecular Chemistry and Physics. 218, 23, 9 p., 1700340.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Effect of the polymer structure on the viscoelastic and interfacial healing behaviour of poly(urea-urethane) networks containing aromatic disulphides

    Grande, A. M., Martin, R., Odriozola, I., van der Zwaag, S. & Garcia, S. J., 1 Dec 2017, In : European Polymer Journal. 97, p. 120-128 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. The Compositional Dependence of the Microstructure and Properties of CMSX-4 Superalloys

    Yu, H., Xu, W. & van der Zwaag, S., 14 Nov 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Healing of a glass fibre reinforced composite with a disulphide containing organic-inorganic epoxy matrix

    Post, W., Cohades, A., Michaud, V., van der Zwaag, S. & Garcia, S. J., 10 Nov 2017, In : Composites Science and Technology. 152, p. 85-93 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Correction to: Imaging the Molecular Motions of Autonomous Repair in a Self-Healing Polymer (Advanced Materials, (2017), 29, 26, (1701017), 10.1002/adma.201701017)

    van der Kooij, H. M., Susa, A., García, S. J., van der Zwaag, S. & Sprakel, J., 6 Nov 2017, In : Advanced Materials. 29, 41, 1770296.

    Research output: Contribution to journalComment/Letter to the editorScientificpeer-review

  50. Non-destructive monitoring of delamination healing of a CFRP composite with a thermoplastic ionomer interlayer

    Post, W., Kersemans, M., Solodov, I., Van Den Abeele, K., García, S. J. & van der Zwaag, S., 1 Oct 2017, In : Composites Part A: Applied Science and Manufacturing. 101, p. 243-253 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...16 Next

ID: 142717