1. 1995
  2. Deeltjes oplossen tijdens homogeniseren van aluminium-legeringen

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1995, In : Materialen. 1, p. 25-28 4 p.

    Research output: Contribution to journalArticleScientific

  3. 1996
  4. Microstructuur en kinetiek tijdens het partieel gloeien van twee commerciële niet-hardbare aluminiumlegeringen

    Sontgerath, JAH., van Mourik, P., van der Zwaag, S. & Korevaar, BM., 1996, In : Materialen. 1, p. 21-27 7 p.

    Research output: Contribution to journalArticleScientific

  5. 1997
  6. Analytical approach to particle dissolution in a finite medium

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1997, In : Materials Science and Technology. 13, p. 308-312 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 1998
  8. 24 Months Progress Report. Periode 1-12-1997 t/m 31-5-1998.

    Schlögl, SM., van Leeuwen, Y., van der Giessen, E. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 10 p.

    Research output: Book/ReportReportProfessional

  9. A filiform corrosion and potentio-dynamic polarisation study of aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 1998, Proceedings of EUROCORR '98.. van der Weijde, DH. & de Wit, JHW. (eds.). p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. A mathematical model for the dissolution kinetics of Mg2Si-phases in Al-Mg-Si alloys during homogenisation under industrial conditions.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 254, p. 13-32 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. A statistical evaluation of the staircase and the ArcSin SQRT(P) method for determining the fatigue limit.

    Braam, JJ. & van der Zwaag, S., 1998, In : Journal of Testing and Evaluation. 26, 2, p. 125-131 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241-243, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization.

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Ferrite nucleation and growth in steel studied with neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  15. Filiform corrosie van gelakt aluminium: het effect van microstructurele variaties in het substraatoppervlak.

    Mol, JMC., van der Zwaag, S. & de Wit, JHW., 1998, Delft: Delft University of Technology. 9 p.

    Research output: Book/ReportReportProfessional

  16. Improvement of hot rolled products by physical and mathematical modelling.

    Howe, A., Anelli, E., Bhadeshia, H., Garcia De Andres, C., Gutierrez, I., Hoogendoorn, T., Kaspar, R., Larburu, J. & van der Zwaag, S., 1998, THERMEC'97. International Conference on Thermomechanical Processing of Steels and other Materials1998.. p. 2015-2021 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  17. Intelligent processing in a hot rolling mill for structural steels.

    van der Wolk, PJ., Dorrepaal, C., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the RTA/AVT Panel workshop 1 on Intelligent Processing of High Performance Materials.. Brussels: AGARD, p. 6.1-6.6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Kinetics of gamma to alpha phase transformation in Fe-Mn alloys containing low manganese.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Technology. 14, 1, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Modelling fracture in aluminium based metal matrix composites using a statistical approach.

    Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 1998, ECF12 - Fracture from Defects.. Brown, MW., Rios, de los, ER. & Miller, KJ. (eds.). Cradley Heath, UK.: Emas Publishing, p. 1375-1380 6 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  20. Modelling of an industrial extrusion process.

    Coolegem, G., van der Wolk, PJ., Sietsma, J. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 63 p.

    Research output: Book/ReportReportScientific

  21. Modelling of the thermal expansion and compression of Mn.

    Qui, C. & van der Zwaag, S., 1998, In : Journal of Physics and Chemistry of Solids. 59, 2, p. 167-174 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Modelling the CCT diagram of engineering steels using neural networks.

    van der Wolk, PJ., Dorrepaal, C. & van der Zwaag, S., 1998, Fourth International Conference on Engineering Applications of Neural Networks.. Bulsari, AB., Fernendez De Canete, J. & Kallio, S. (eds.). p. 609-612 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Modelling the austenite decomposistion in steel on a physical basis.

    van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). Trans Tech Publications, p. 27-38 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Modelling the microstructural changes during the homogenisation of extrudable aluminium alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Journal of the Mechanical Behavior of Materials. 9, 2, p. 115-120 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  26. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  27. Phase transformation in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, J., Kop, TA., Sietsma, J. & van der Zwaag, S., 1998, EUROMECH-MECAMAT. 3rd European Mechanics Conference on Mechanics and Multi-Physics Processes in Solids.. Oxford, p. 372-380 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Precipitation kinetics in Al6061 and in an Al6061-alumina particle composite.

    Chen, SP., Mussert, KM. & van der Zwaag, S., 1998, In : Journal of Materials Science. 33, p. 4477-4483 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Simulations of pro-eutectoid ferrite formation using a mixed control growth model.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, 1, p. 104-116 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Some observations on cyclic deformation structures in the high-strength commercial aluminium alloy AA7150.

    Hanlon, DN., Rainforth, WM. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2727-2736 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. The dissolution of a stoichiometric second phase in ternary alloys: A numerical analysis.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, p. 93-103 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. The effect of geometrical assumptions in modeling solid-state transformation kinetics.

    van Leeuwen, Y., Vooijs, S., Sietsma, J. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2925-2931 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. The effect of metalworking fluids on the gas-nitriding behavour of 31CrMoV9 steel.

    Pennings, B. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1215-1217 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. The effect of the austenisation temperature on the transformation kinetics of an Nb-containing steel.

    Kop, TA., Remijn, PGW., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). San Sebastian, p. 193-200 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, 15, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. The formability of spray-formed, high-chromium contenc, white cast iron.

    Hanlon, DN., Li, YH., Rainforth, WM., Sellars, CM. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1637-1640 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Volume changes in Fe-Cu and Fe-Co alloys during the austenite to ferrite phase transformatio.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  39. 1999
  40. 3D Neutron depolarization experiments on the gamma/alpha phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, ECNS99 Conference.. p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. A microstructural model for predicting hardness profiles of Fe-Cr alloys after nitriding.

    Braam, JJ. & van der Zwaag, S., 1999, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 79, 5, p. 1193-1206 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. An asymptotic solution for the dissolution of particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, PCC'99: workshop. Warsaw: PAN, p. 155-159 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. An asymptotic solution for the dissolution of particles in multi-component alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, Workshop on phase change with convection modelling and validation.. Kowalewski, TA., Stella, F., Banaszek, J. & Szmyd, JS. (eds.). Polskiej Akademii Nauk, Warsaw.: Publisher Instytut Podstawowych Problemow Techniki, p. 155-159 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Assessment of constitutive equations in modelling the hot deformability of some overaged AlMgSi alloys with varying solute contents.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A266, p. 135-145 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Bainite transformation of low carbon Mn-Si TRIP-assisted multiphase steels: influence of silicon content on cementite precipitation and ausenite retention.

    Jacques, P., Girault, E., Catlin, T., Geerlofs, N., Kop, TA., van der Zwaag, S. & Delannay, F., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 273-275, p. 475-479 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Dissolution of beta particles in an Al-Mg-Si alloy during DSC runs.

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Dissolution of ß particles in an Al-Mg-Si alloy during DSC runs

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Effects of carbon concentration and cooling rate on continuous cooling transformations predicted by artificial neural network.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, In : Tetsu to Hagane. 39, 10, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Ferrite growth from austenite in C-Mn steels during continuous cooling.

    Qui, C., Sietsma, J. & van der Zwaag, S., 1999, In : Ironmaking & Steelmaking: processes, products and applications. 26, 3, p. 200-204 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Filiforme corrosie op aluminium. Rapport naar aanleiding van een brainstormsessie op 17 juni 1999.

    Huisert, MHM., Mol, JMC., de Wit, JHW., van der Zwaag, S., van der Hoeven, J., van der Meer, W., van der Weijde, DH., van Westing, EPM., Meijers, SD. & Spoelstra, MB., 1999, Delft: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  51. Heat Treatment Science and Technology.

    van der Zwaag, S., 1999, Annual Report 1998 MIDEG.. p. 77-96 20 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  52. Micromechanics for macroscopic lifetime optimisation, Annual report 1998.

    van der Zwaag, S., 1999, Delft: Delft University of Technology. 11 p.

    Research output: Book/ReportReportProfessional

  53. Neutron depolarisation study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Neutron depolarization study of phase transformations in steel.

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Phase transformations in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, Y., Kop, TA., Sietsma, J. & van der Zwaag, S., 1999, In : The European Physical Journal. Special Topics. 9, p. 401-409 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Secrets of steel revealed by neutrons.

    Schrauwers, A., te Velthuis, SGE., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1999, In : Delft Outlook. 1, p. 8-12 5 p.

    Research output: Contribution to journalArticleProfessional

  57. The effect of the composition on the bainite transformation temperatures: a statistical analysis.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, ATTT-ATW-Tagung: Bainitische und martensitische Umwandlungen.. p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 5 p.

    Research output: Book/ReportReportProfessional

  59. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 7 p.

    Research output: Book/ReportReportProfessional

  60. 2000
  61. "werkwijze en inrichting voor het bewerken van een metalen mand, plak of plaat, en daarmee vervaardigd product"

    van der Winden, MR. & van der Zwaag, S., 2000, IPC No. Aangevraagd door Hoogovens Corporate Services BV, Afd. Industriele Eigendom., Patent No. 1014424, Priority date 1 Jan 1800

    Research output: PatentOther research output

  62. "werkwijze voor de vervaardiging van een vervormingsstaal met goede vervormingseigenschappen en vervormingsstaal van een laag-koolstof kwaliteit"

    van der Zwaag, S., Krusemeijer, G. & Vegter, H., 2000, IPC No. Aangevraagd door Hoogovens Corporate Services BV, Afd. Industriele Eigendom., Patent No. PCT/NL99/00182, Priority date 1 Jan 1800

    Research output: PatentOther research output

  63. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  64. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. A filiform corrosion and potentiodynamic polarisation study of some aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, 7, p. 1629-1639 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. A flow stress model for the intercritical deformation of low-carbon steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, Modelling of metal rolling processes 3.. IOM Communications Ltd., p. 268-279 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  67. A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys.

    Wits, JJ., Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 283, p. 234-241 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. A study on the effect of plastic deformation on the austenite-to-ferrite phase transformation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proceedings (2nd version) of J.J. Jonas Symposium on thermomechanical processing of steel.. p. 735-750 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  69. A three-dimensional model for the development of the microstructure in steel during slow cooling

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 2000, 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. A three-dimensional model for the development of the microstructure in steel during slow cooling.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. An inventory of numerical methods to model solid-state phase transformations in aluminium alloys: a literature review

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, Delft: Netherlands Institute for Metals Research. 42 p.

    Research output: Book/ReportReportScientific

  72. An investigation of the kinetics of the austenite to ferrite transformation from deformed austenite.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proc. Third International Conference on Modelling of Metal Rolling Processes.. London: Institute of Metals, p. 431-440 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  73. Aspect ratio of bainite in steels.

    Wang, J., van der Zwaag, S., Yang, Z. & Fang, HS., 2000, In : Materials Letters. 45, p. 228-234 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Comparion of experimental AA60663 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model.

    van de Langkruis, J., Lof, J., Kool, WH., van der Zwaag, S. & Huétink, J., 2000, In : Computational Materials Science. 18, p. 381-392 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Comparison of particle dissolution modules in AlStruc (Sintef) and Homog (TUDelft)

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, Delft: Netherlands Institute for Metals Research. 11 p.

    Research output: Book/ReportReportScientific

  76. Determination of martensite start temperature in engineering steels. Part I. Empirical relations describing the effect of steel chemistry.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 761-768 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Determination of martensite start temperature in engineering steels. Part II. Correlation between critical driving force and Ms temperature.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 769-776 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Determination of static softening after hot deformation by double hit compression experiments.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, THERMEC 2000 ¿ Proceedings International Conference on Processing and Manufacturing of Advanced materials.. p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  79. Effect of bainite reaction on austenite retention in Al containg TRIP steel.

    Wang, J. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 21 p.

    Research output: Book/ReportReportProfessional

  80. Effect of complex strain paths on hot deformation of aluminium alloys.

    Davenport, SB. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Jouffrey, B. & Svejcar, J. (eds.). p. 169-174 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  81. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 2000, 48, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 48, 5, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Influence of alloying elements and their interactions on the martensite start temperature.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, Microstructures, mechanical properties and processes - computer simulation and modelling.. Bréchet, Y. (ed.). Weinheim, Germany.: Wiley-VCH, p. 64-69 6 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  84. Linking plane strain compression tests on AA6063 to laboratory scale extrusion via constitutive equations.

    van de Langkruis, J., Bergwerf, R., van der Zwaag, S. & Kool, WH., 2000, Proc. Conf. on Aluminum Alloys: Their Physical and Mechanical Properties.. p. 565-570 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  85. Microstructure and texture development during and after intercritical rolling of LC-steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, 41st Mechanical working and steel processing conference proceedings.. Iron & Steel Society, p. 923-934 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  86. Modelling Mg2Si dissolution in an AA6063 alloy during preheating to the extrusion temperature.

    van de Langkruis, J., Kuijpers, NCW., Kool, WH., Vermolen, FJ. & van der Zwaag, S., 2000, Seventh International Aluminum Extrusion Technology Seminar & Exposition ET 2000.. p. 119-124 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  87. Modelling the austenite to ferrite phase transformation in low carbon steels in terms of the interface mobility.

    Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : ISIJ International. 40, 7, p. 713-718 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Monitoring precipitation kinetics in an Al-Mn-Mg-Cu alloy using thermoelectric powder and electrical resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Brechet, Y. (ed.). p. 90-95 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  89. Monitoring the precipitation reactions in a cold rolled Al-Mn-Mg-Cu alloy using thermoelectric power and resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2000, Proc. Conf. ICAA-7.. Starke Jr., EA., Sander Jr., TH. & Cassada, WA. (eds.). p. 933-938 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. On the influence of alloying elements on the bainite reaction in low alloy steels during continuous cooling.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, p. 4393-4404 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. On the mobility of the austenite-ferrite interface in Fe-Co and Fe-Cuu.

    Vooijs, S., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 31, p. 379-385 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Phase transformations and microstructural evolution in aluminium-containing TRIP steels.

    Zhao, L., Sietsma, J. & van der Zwaag, S., 2000, Steels and materials for power plants.. Neumann et al., P. (ed.). Weinheim: Wiley-VCH, p. 77-82 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  93. Significance of deformation mode in hot deformation.

    Davenport, SB., Todd, I. & van der Zwaag, S., 2000, Proc. conf. ICAA-7.. Starke, EA., Sander, TH. & Cassada, WA. (eds.). p. 443-448 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  94. The effect of a thermal treatment on the fracture toughness K1c of an Aluminium AA6061-Al2O3 metal matrix composite material.

    van der Zwaag, S., Mussert, KM., van Gorp, A. C., Duwel, AHC. & Bakker, A., 2000, Proc. Conf. ATTT-AWT Tagung Gefüge und daraus resultierende Bauteileigenschaften.. p. 111-115 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  95. The effect of a thermal treatment on the fracture toughness K1c of an aluminium AA6061-AI2O3 metal matrix composite material

    van der Zwaag, S., van Gorp, A. C., Mussert, KM., Duwal, A. & Bakker, A., 2000, Gefüge und daraus resultierende Bauteileigenschaften. Berichtsband der Deutsch-Französischen ATTT-AWT-Tagung vom 13./14. 4 2000 in Aachen. Bremen: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik, p. 111-115 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. The effect of grain geometry on the kinetics of recrystallisation processes.

    Chen, SP., van Leeuwen, Y., Davenport, SB., Hanlon, DN. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Brechet, Y. (ed.). p. 96-101 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  97. The modelling of the hardness of martensite after quenching using a neural network.

    van der Wolk, PJ. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 8 p.

    Research output: Book/ReportReportProfessional

  98. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  99. Wiskundige modellering van microsturcturele veranderingen tijdens het homogeniseren van aluminium

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, STW-2000 04 26-01. S.l.: s.n., p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  100. 2001
  101. A critical appraisal of fracture toughness measurements on AA6061 and an Al203-particle reinforced AA6061 alloy for various heat treatments

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. A critical appraisal of fracture toughness measurements on AA6061 and an Al2O3 particle reinforced AA6061 alloy for various heat treatments.

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  103. A mathematical model of the morphological changes in aluminium extrusion alloys during homogenization.

    van Til, W., Vuik, C. & van der Zwaag, S., 2001, Delft: Delft University of Technology. 33 p.

    Research output: Book/ReportReportProfessional

  104. A study of hydrogen embrittlement in automotive fastener steels.

    Lonyuk, B., Hop, R., Hanlon, DN., van der Zwaag, S., Zuidema, J. & Bakker, A., 2001, Advances in Fracture Research, Proceedings on CD-rom of 10th International Conference on Fracture.. Ravi-Chandar, K. (ed.). p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  105. A study on the fracture toughness of Al-based MMCs containing different volume fractions Al2O3.

    Duwel, AHC., Mussert, KM., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Materials Science Letters. 20, p. 1147-1150 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  106. Advanced hot rolling practice and products for the production of hot rolled strips.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, . Joint ECSC-Steel NEST workshop advanced hot rolling practice and products.. Düsseldorf, Germany: VDeh, p. 1-3 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  107. Anisotropic dilatation behaviour during transformation of hot rolled steels showing banded structure.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Technology. 17, 12, p. 1569-1574 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  108. Computational modelling of free and Moving boundary problems.

    van Til, W., Vuik, C. & van der Zwaag, S., 2001, Sixth International Conference on the Computational Modelling of Free and Moving Boundary Problems, Moving Boundaries VI.. p. 123-132 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  109. Dilatometric analysis of phase transformations in hypo-eutectoid steels.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 36, p. 519-526 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  110. Domain size determination of granular ferromagnetic systems with neutron depolarization

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. vol 89, no, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  111. Domain size determination of granular ferromagnetic systems with neutron depolarization.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. 89, 2, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  112. Effect of strain path in torsion on subsequent recrystallization behaviour of an AA1050 and AA3103 aluminium alloys.

    Valle, R., van der Zwaag, S. & Nes, E., 2001, 1st Joint International Conference on Recrystallization and Grain Growth.. Gottstein, G. & Molodov, DA. (eds.). Berlin: Springer, p. 1231-1236 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  113. Effects of nitriding on fatigue strength of quenched and tempered steel: role of interstitial nitrogen.

    Korevaar, BM., Coorens, S., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 17, p. 54-62 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  114. Flow stress prediction during intercritical deformation of a low-carbon steel with a rule of mixtures and Fe-simulations.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Scripta Metallurgica. 45, p. 875-882 8 p.

    Research output: Contribution to journalArticleScientific

  115. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  116. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels.

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  117. Monitoring the precipitation reactions in a cold-rolled Al-Mn-Mg-Cu alloy using thermoelectric power and electrical resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2001, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 81, 8, p. 2059-2072 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  118. Moving boundaries in solid state aluminium alloys

    van Til, W., Vuik, C. & van der Zwaag, S., 2001, Proceedings. B Sarler & CA Brebbia (eds.). Southampton: WIT Press, p. 123-132 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  119. OIM study on recrystallization of a cold rolled aluminium sheet metal.

    Chen, SP. & van der Zwaag, S., 2001, EBSD session at NvVm annual meeting.. p. 40-41 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  120. On the nature of the bimodal grain size distribution after intercritical deformation of a carbon-manganese steel.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Characterization. 47, p. 1-7 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  121. On the relation between softening processes and the austenite to ferrite phase transformation in steel.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, Minerals and Materials Society.. p. 215-227 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  122. On the role of hydrogen in fracture of commercial fastener steels.

    Lonyuk, B., Hop, R., Hanlon, DN., van der Zwaag, S., Zuidema, J. & Bakker, A., 2001, Proceedings of the International Symposium "Contemporary problems of Mechanics of Materials: Physico-chemical aspects and diagnostics of materials properties.. p. 104-105 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  123. Recovery and recrystallisation kynetics in deformed AA1050 after simulated break down rolling.

    Chen, SP., Zuidwijk, T. & van der Zwaag, S., 2001, 1st Joint International Conference on Recrystallization and Grain Growth.. Gottstein, G. & Molodov, DA. (eds.). Springer, p. 821-830 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  124. Some mathematical aspects of particle dissolution and cross-diffusion in multi-component alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2001, Delft: Delft University of Technology. 24 p.

    Research output: Book/ReportReportProfessional

  125. Some observations on the effect of austenitisation conditions on the transformation kinetics in an HSLA steel and related C-Mn steels.

    Kop, TA., Remijn, PGW., Svetchnikov, V., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 38, p. 1863-1871 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  126. Stabilization mechanisms of retained austenite in transformation-induced plasticity steel.

    Wang, J. & van der Zwaag, S., 2001, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 32A, p. 1527-1539 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  127. The application of laser scanning confocal microscopy to tribological research.

    Hanlon, DN., Todd, I., Peekstok, ER., Rainforth, WM. & van der Zwaag, S., 2001, In : Wear. 251, p. 1159-1168 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  128. The austenite to ferrite transformation kinetics of low carbon steels under ultra-fast cooling conditions.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, THERMEC 2000 ¿ Proceedings International Conference on Processing and Manufacturing of Advanced materials.. p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  129. The effect of beta, beta' and beta'' precipitates in a homogenised AA6063 alloy on the hot deformability and the peak hardness.

    van de Langkruis, J., Kool, WH., Sellars, CM., van der Winden, MR. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 229, p. 105-115 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  130. The effect of plastic deformation of austenite on the kinetics of subsequent ferrite formation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1028-1036 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  131. The effects of alloy composition and surface treatment on the development of filiform corrosion on aluminium alloys.

    Mol, JMC., Duxbury, E., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2001, Proceedings of the 41st Annual Conference of the Australasian Corrosion Association 'Corrosion and Prevention-01'.. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  132. The gamma-alpha transformation kinetics of low carbon steels under ultra-fast cooling condition.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientific

  133. Theoretical study of P-containing transformation-induced plasticity steel. Part 1 - determination of the phosphorus concentration.

    Wang, J. & van der Zwaag, S., 2001, In : Zeitschrift fuer Metallkunde. 92, 12, p. 1299-1305 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  134. Theoretical study of P-containing transformation-induced plasticity steel. Part 2 - Analysis of the potential TRIP effect.

    Wang, J. & van der Zwaag, S., 2001, In : Zeitschrift fuer Metallkunde. 92, 12, p. 1306-1311 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  135. Transformation, microstructural and mechanical stabilization of metastable austenite in TRIP steels.

    Wang, J. & van der Zwaag, S., 2001, ECSC Steel & NEST workshop Advanced hot rolling practice and products for the production of hot rolled strips.. Düsseldorf, Germany.: VDeh, p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  136. 2002
  137. A discussion on the atomic mechanism of the bainitic reaction in TRIP steels

    van der Zwaag, S. & Wang, J., 2002, In : Scripta Materialia. 47, p. 169-173 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  138. A mathematical model for the dissolution of stoichiometric particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 328, p. 14-25 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  139. A metallographic analysis of intercritically deformed C-Mn steel subjected to complex strain histories

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : ISIJ International. 42, 4

    Research output: Contribution to journalArticleScientificpeer-review

  140. A nano-indentation study on the mechanical behaviour of the matrix material in an AA6061-Al2O3 MMC.

    Mussert, KM., Vellinga, WP., Bakker, A. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 789-794 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  141. A quantification of the kinetic character of mixed-mode solid-state phase transformations.

    Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  142. A study of post plating heat treatment in automotive fastener steels.

    Lonyuk, B., Hop, R., Hanlon, DN., van der Zwaag, S., Zuidema, J. & Bakker, A., 2002, ECF 14, Fracture Mechanics beyond 2000, Vol. II, Proc. of the 14th Bienniel Conference on Fracture (ECF 14), Cracow, Poland, 8-13 September 2002.. Neimitz, A., Rokach, IV., Kocanda, D. & Golos, K. (eds.). Sheffield, UK: EMAS Publications, p. 373-380 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  143. Changes in Fe and Si solute levels during deformation of AA1200

    Lok, ZJ., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002, In : Materials Science Forum. 396-402, p. 457-462 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  144. Changes in Fe and Si solute levels during deformation of AA1200.

    Lok, ZJ., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  145. DSC study on Mg-Si phases in as cast AA6xxx.

    Kuijpers, NCW., Kool, WH. & van der Zwaag, S., 2002, The 8th International Conference on Aluminium Alloys.. Switzerland: Materials Science Forum, p. 396-402 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  146. Ferrite/pearlite band formation in hot rolled medium carbon steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Technology. 18, p. 297-303 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  147. Filiform corrosion imaged beneath protection layers on Al Alloys

    Szymanski, R., Jamieson, DN., Hughes, T., Mol, JMC., van der Zwaag, S. & Ryan, CG., 2002, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 190, 1-4, p. 365-369 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  148. Grain nucleation and growth during phase transformations

    Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2002, In : Science. 298, p. 1003-1005 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  149. High Temperature SANS Experiments on Nb(C,N) and MnS Precipitates in HSLA Steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S. & Heenan, RK., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, July 2002, p. 1883-1891 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  150. In situ observations on the austenite stability in TRIP-steel during tensile testing

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Margulies, L., Lauridsen, EM., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002, In : Steel Research International. 73, 6+7, p. 236-241 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  151. In situ observations on the austenite stability in TRIP-steel during tensile testing

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Margulies, L., Lauridsen, EM., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002, Fundamental Materials Science of the TRIP Phenomenon. BC De Cooman (ed.). Aachen-Mainz: Wissenschaftsverlag Mainz GmbH, p. 25-29 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  152. In-situ high-temperature X-ray diffraction on the g to a transformation in low-carbon steels

    Bodin, A., Woning, L., Sietsma, J. & van der Zwaag, S., 2002, In : ISIJ International. 42, p. 94-99 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  153. In-situ observation of the austenite to ferrite phase transformation in steels.

    van der Meij, R., Peekstok, ER., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  154. In-situ observations on the mechanical stability of austenite in TRIP steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  155. In-situ observations on the mechanical stability of austenite in TRIP-steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  156. In-situ observations on the mechanical stability of austenite in TRIP-steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  157. Influence of intercritical annealing temperature on the microstructure in a high aluminium TRIP steel

    Zhao, L., Moreno, JJ., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002, TRIP-aided ferrous alloys. BC De Cooman (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 141-146 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  158. Investigation of recovery and recrystallisation processes in C-Mn steel.

    Smith, A., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  159. Magnetic determination of the thermal stability of retained austenite in TRIP steel

    Zhao, L., Tegus, O., Brück, E., van Dijk, NH., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002, Fundamental Materials Science of the TRIP Phenomenon. de Cooman, DC. (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 71-74 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  160. Magnetic determination of the thermal stability of retained austenite in TRIP steel.

    Zhao, L., Tegus, O., Brück, E., van Dijk, NH., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  161. Microchemical and structural changes after hot working of AA3103

    Lok, ZJ., Anselmino, E., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  162. Microstructure development and mechanical behaviour of Al-containing TRIP-steels

    Papaefthymiou, S., Bleck, W., Kruijver, SO., Zhao, L., Sietsma, J. & van der Zwaag, S., 2002, Automative Applications. BC De Cooman (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 341-345 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  163. Modeling the kinetics of grain boundary nucleated recrystallisation processes after cold deformation

    Chen, SP., Todd, I. & van der Zwaag, S., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, p. 529-539 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  164. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part I: Phase regions.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1199-1207 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  165. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part II: Microstructure and hardness.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1208-1216 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  166. Neutron depolarization study of the austenite/pearlite phase transformation in steel

    van Wilderen, LJGW., Offerman, SE., van Dijk, NH. & van der Zwaag, S., 2002, In : Applied Physics A: materials science & processing. 74, Part 2 sup, p. s1052-s1054

    Research output: Contribution to journalArticleScientificpeer-review

  167. Neutron depolarization study on the autenite/pearlite phase transformation in steel

    van Wilderen, LJGW., Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S1052-S1054

    Research output: Contribution to journalArticleScientificpeer-review

  168. Quantification of the evolution of the 3D intemetallic structure in a 6005A aluminium alloy during a homogenisation treatment.

    Kuijpers, NCW., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2002, In : Materials Characterization. 48, p. 379-392 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  169. Quantification of the recrystallization behaviour in Al-alloy AA1050

    Chen, SP., Hanlon, DN., van der Zwaag, S., Pei, YT. & Hosson, T., 2002, In : Journal of Materials Science. 37, p. 989-995 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  170. Quantitative dilatometric analysis of intercritical annealing in a low-silicon TRIP steel

    Zhao, L., Kop, TA., Rolin, V., Sietsma, J., Mertens, AIM., Jacques, PJ. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 1585-1591 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  171. SANS experiments on Nb(C,N) and MnS precipitates in HSLA steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S978-S980

    Research output: Contribution to journalArticleScientificpeer-review

  172. Texture and microstructure development during intercritical rolling of low-carbon steels

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, p. 1589-1603 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  173. The application of reversed torsion deformation to the study of the austenite to ferrite phase transformation in steels

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : Scripta Materialia. 46, p. 413-417 5 p.

    Research output: Contribution to journalArticleScientific

  174. The effect of mechanical surface patterning on filiform growth characteristics

    Mol, JMC., de Wit, JHW. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, 13, p. 2755-2761 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  175. The influence of nitrogen on the austenite/ferrite interface mobility in Fe-1at.%Si

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 323, p. 403-408 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  176. The role of dispersoids in thermo-mechanical processes of aluminium alloys.

    Anselmino, E. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  177. Thermal and mechanical stability of retained austenite in Al-containing TRIP steels

    Zhao, L., Kruijver, SO., van der Pers, NM., Sietsma, J., Tegus, O., Brück, E., van Dijk, NH. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  178. Thermal and mechanical stability of retained austenite in aluminium-containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2002, In : ISIJ International. 42, 12, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  179. 2003
  180. A model of the beta-AlFeSi to alpha-Al(FeMn)Si transformation in Al-Mg-Si alloys

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Transactions. 44, 7, p. 1448-1456 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  181. A physics-based transformation model for low-carbon steels: from first principles to on-line application

    van Leeuwen, Y., Luinenburg, A. W., Onink, M., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientific

  182. A study on the beta' and beta" formation kinetics in AA6063 using differential scanning calorimetry

    van de Langkruis, J., Vossenberg, MS., Kool, WH. & van der Zwaag, S., 2003, In : Journal of Materials Engineering and Performance. vol. 12, No. 4, p. 408-413 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  183. Acoustic-emission investigations on the austenite decomposition in a medium-carbon steel.

    Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2003, Tranformation and Deformation Mechanisms in Advanced High-Strength Steels.. Militzer, M., Essadiqu, E. & Poole, W. J. (eds.). Vancouver, Canada: COM 2003, p. 109-124 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  184. Advanced models for particle dissolution in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, Euromat 2003. p. 142-145 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  185. Analysis of the y - a transformation in a C-Mn steel by dilatometry, laser scanning confocal microscopy and phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2003, EPD 2003 conference in Chicago. Damm, E. B. & Merwin, M. J. (eds.). Chicago, USA: EPD, p. 353-366 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  186. Assessment of different techniques for quantification of alpha-Al(FeMn) and beta-AlFeSi intermetallics in AA 6xxx alloys.

    Kuijpers, NCW., Kool, WH., Koenis, PTG., Nilsen, K. E., Todd, I. & van der Zwaag, S., 2003, In : Materials Characterization. 49, p. 409-420 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  187. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite Formation and Decomposition. Damm, EB. & Merwin, M. (eds.). Warrendale, USA: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  188. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite and Decomposition. Damm, EB. & Merwin, EB. (eds.). Warrendale: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  189. Cluster formation of pearlite colonies during the austenite/pearlite phase transformation in eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, In : Physica B: Condensed Matter. 335, p. 99-103 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  190. Dispersoid characterisation during hot processing of AA3103.

    Anselmino, E., Miroux, A. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  191. Dispersoid evolution during hot working of AA3103.

    Anselmino, E., Lok, ZJ., Hamerton, R. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  192. Effect of Intercritical deformation on bainite formation in Al-containing TRIP steel

    Luo, H., Zhao, L., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, 8, p. 1219-1227 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  193. Effect of microsegregation and dislocations on the nucleation kinetics of precipitation in aluminium alloy

    Chen, SP., Kuijpers, NCW. & van der Zwaag, S., 2003, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A341, p. 296-306 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  194. Evolving microstructure in pearlitic steel studied by neutron depolarisation

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 56-57 88 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  195. Grain Nucleation and Growth during Phase transformations

    Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2003, ESRF Highlights. Cornuéjols, D. & Admans, G. (eds.). Grenoble: ESRF, p. 66-67 2 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  196. High temperature SANS experiments on Nb(C,N) and Mn5 precipitates in HSLA steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 58-59 88 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  197. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  198. Hot deformation stimulated Mn depletion in AA3103.

    Lok, ZJ., Anselmino, E., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  199. In situ observations of the austenite to ferrite transformation

    van der Zwaag, S., Sietsma, J., Onink, M. & te Velthuis, SGE., 2003, Int. Conf Thermomechanical Processing. E.J. Palmiere, M. Mahfouf & C. Pinna (eds.). Sheffield, p. 193-196 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  200. In situ observations on the mechanical stability of austenite in TRIP steel

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003, In : The European Physical Journal. Special Topics. 104, p. 499-502 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  201. In-situ study of pearlite nucleation and growth during isothermal austenite decomposition in nearly eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 2003, In : Acta Materialia. 51, p. 3927-3938 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  202. Isolating the effect of the dislocation substructure on the austenite to ferrite transformation kinetics in C-Mn steel following hot plastic deformation

    Hanlon, DN., Davenport, SB., Hunt, RD. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 176-183 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  203. Material characterisation and optimisation of fibre metal laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2003, Computational Methods in Materials Characterisation. Series: High Performance Structures and Materials. Mammoli, A. A. & Brebbia, C. A. (eds.). Southampton: WIT Press, p. 55-64 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  204. Microchemistry effects during recrystallization of aluminium alloys.

    Miroux, A., Lok, ZJ., Anselmino, E., Chen, C. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  205. Micromechanical damage simulations of TRIP steels

    Papaefthymiou, S., Bleck, W., Prahl, U., Acht, C., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1355-1360 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  206. Modelling work-hardening of intercritically deformed low-carbon steels using a physical, a statistical, a hybrid and a finite element approach

    Bodin, A., Butler, SA., Burghardt, A., Sietsma, J. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 138-145 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  207. Neutron depolarisation study on the austenite grain size in TRIP steels.

    van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  208. On subsurface crack growth in fibre metal laminate materials

    Randell, CE. & van der Zwaag, S., 2003, Materials and Processing: Enabling Flight, our legacy and our future. Schmitt, G. E. (ed.). Covina, USA: SAMPE, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  209. On the precipitation and recrystallization behavior in an AA3003 following hot deformation

    Chen, SP., Lok, ZJ. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 281-288 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  210. Particle dissolution and cross-diffusion in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A347, p. 265-279 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  211. Physical Simulation of Thermally Induced Martensite Formation from Retained Austenite in TRIP steels

    Zhao, L., Vermolen, FJ., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 19, suppl 1, p. 105-108 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  212. Quantification of dispersoids in hot and cold processed AA3103.

    Anselmino, E., Miroux, A. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  213. Quantification of the evolution of the 3D intermetallic structure in a 6005A aluminium alloy during a homogenisation treatment

    Kuijpers, NCW., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2003, In : Materials Characterization. 48, p. 379-392 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  214. Softening kinetics of deformed C-Mn steel in the intercritical region.

    Luo, H., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  215. Tailoring austenite stability in TRIP Steels.

    Butt, A., Zhao, L., van Dijk, NH. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  216. Tailoring austenite stability in TRIP-steels.

    Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  217. The influence of carbon diffusion on the character of the gamma-alpha phase transformation in steel

    van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, No. 5, p. 767-773 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  218. The mechanical stability of austenite in TRIP steel observed by 3D X-ray microdiffraction

    Kruijver, SO., Zhao, L., Sietsma, J., Lauridsen, EM., Poulsen, HF., Offerman, SE., van Dijk, NH., Margulies, L., Grigull, S. & van der Zwaag, S., 2003, Transformation and deformation mechanisms in advanced high-strength steels. Militzer, M., Poole, WJ. & Essadiqi (eds.). Vancouver, Canada: Metsoc, p. 223-234 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  219. The tensile stability of austenite in TRIP steel observed by 3D X-ray microdiffraction.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Jargulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  220. Thermal and mechanical stability of retained austenite in aluminium containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2003, In : ISIJ International. 42, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  221. Through process modeling of Mn precipitation in AA3103.

    Lok, ZJ., Miroux, A. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  222. Wholly Aromatic Main-chain nematic Thermosets for Composite Applications

    Dingemans, TJ. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  223. 2004
  224. A Statistical Mechanics Theory of Grain Deformation and its Prediction of Dynamical Recovery and Recrystallization

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 87-92 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  225. A comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of AA1050

    Chen, SP. & van der Zwaag, S., 2004, In : Journal of Testing and Evaluation. 32, 4, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  226. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  227. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  228. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  229. A model of the beta-AlFeSi to alpha-A1(FeMn)Si transformation during homogenization in 6xxx alloys

    Vermolen, FJ., Kuijpers, NCW., Vuik, C., Koenis, PTG., Nilsen, K. E. & van der Zwaag, S., 2004, Proceedings of the Eight international aluminum extrusion technology seminar. Rajski, GT. (ed.). Wouconda, Ill, US: ET Foundation, p. 57-65 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  230. A morphological study of filiform corrosive attack on cerated AA2024-T351 alluminium alloy

    Hughes, A. E., Mol, JMC., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, p. 107-124 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  231. A morphological study of filiform corrosive attack on chromated and alkaline-cleaned AA2024-T351 aluminium alloy

    Mol, JMC., Hughes, A. E., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 46, 5, p. 1201-1224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  232. A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 9, p. 2789-2797 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  233. A quantitative description of multicomponent growth of needle-shaped prcipitates in non-ideal solutions

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, 10th World Conference on Titanium. Prof. Dr. G. Lutjering & Prof.Dr. J. Albrecht (eds.). Weinheim: Wiley-VCH Verlag, p. 1083-1089 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  234. A single grain approach applied to the modeling of recrystallization kinetics for cold rolled single-phase metals

    Chen, SP. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35(A), 3, p. 741-749 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  235. Advanced models for particle dissolution in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, Solid state transformation and heat treatment, part 1: Precipitation and diffusion processes. Hazotte, A. (ed.). Weinheim: Wiley-VCH, p. 53-61 8 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  236. Assuring Microstructural Homogenity in Dual Phase and Trip Steels

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Steel Research International. 75, p. 711-715 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  237. Characteristics of the static recrystallisation kinetics of an intercritically deformed C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 293-298 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  238. Controlling retained austenite stability in TRIP steel

    Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  239. Determination of Fatigue Damage at Precipitate Level in 2024-T3 using Positron Annihilation and Nuclear Magnetic Resonance

    van der Zwaag, S., van Veen, A., Schut, H., Hill, AJ. & Bastow, T. J., 2004, Conference Proceeding for the 9th International Aluminum Alloys Conference. Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: Institute of Materials Engineering Australasia Ltd, p. 363-368 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  240. Determination of microscale deformation in hot worked steel

    Hernandez castillo, L. E., Beynon, JH., Pinna, C. & van der Zwaag, S., 2004, Metal Forming 2004. Krakow, p. 387-392 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  241. Dielectric characterization of a series wholly aromatic poly(ether imide)s

    Dingemans, TJ., Mayingi, J., van der Zwaag, S. & Wübbenhorst, M., 2004.

    Research output: Contribution to conferencePosterProfessional

  242. Dilatometric investigations on the decomposition of austenite in two medium-carbon steels with and without Cr and Mo additions

    Mertens, AIM., Brown, A., Zhao, L., McDermid, JR., Sietsma, J. & van der Zwaag, S., 2004, Materials Science & Technology (MS&T) 2004 Conference Proceedings. s.n. (ed.). Wallendale: AIST & TMS, p. 187-198 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  243. Dispersoid quantification and size distribution in hot and cold processed AA3103

    Anselmino, E., Miroux, AG. & van der Zwaag, S., 2004, In : Materials Characterization. 52, 4-5, p. 289-300 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  244. Effect of inhomogeneous deformation on the recrystallization kinetics of deformed metals

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 11, p. 1931-1936 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  245. Evaluation of the applicability of a thermomechanical model to industrial extrusion experiments of AA6063

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 2004, Proceedings 8th International Aluminum Extrusion Technology Seminar ET 2002. Fellom, AM., Rajsky, GT., Skillingberg, MH. & Werner, RI. (eds.). Wauconda: ET Foundations, p. 253-258 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  246. Evolving microstructures in carbon steel studied by 3DXRD microscopy

    Offerman, SE., Zijden, ACP., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, Evolution of deformation microstructures in 3D. Gundlach, G., Haldrup, K., Hansen, N., Huang, X., Juul Jensen, D., Leffers, T., Li, ZJ., Nielsen, SF., Pantleon, W., Wert, JA. & Winther, G. (eds.). Roskilde: Riso national Laboratory, p. 471-480 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  247. Experimental measurement of microchemistry evolution during processing of AA3103

    Miroux, AG., Lok, ZJ., Anselmino, E., Flemming, A. J. E., Bigot, A., Janot, E., Hagström, J., Liu, C., Dons, AL., Lötche, L. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, 6, p. 655-660 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  248. Ferrite nucleation and growth in medium-carbon steel studied by 3DXRD microscopy

    Offerman, SE., Zijden, ACP., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, MS&T conference proceedings. Baker, MA. (ed.). Association for Iron & Steel Technology, p. 227-234 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  249. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2004, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  250. Highlights of designing with Hylite - a new material concept

    Burchitz, I., boesenkool, B., van der Zwaag, S. & Tassoul, M., 2004, In : Materials and Design. 26, 4, p. 271-279 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  251. In-situ Observations of Recrystallisation in AA3103 using FEG-SEM and EBSD

    Anselmino, E., van der Zwaag, S., Seward, G. G. E., Seaton, N. C. A. & Prior, D. J., 2004, Conference Proceeding for the 9th International Aluminum Alloys Conference. Fellom, AM., Rajsky, GT., Skillingberg, MH. & Werner, RI. (eds.). Brisbane: ET Foundations, p. 811-817 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  252. In-situ determination of the ferrite nucleation and growth rates and its relation to the austenite grain size distribution

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004.

    Research output: Contribution to conferenceAbstractScientific

  253. In-situ observations of recrystallisation in AA3103 using FEG-SEM and EBSD.

    Anselmino, E., Miroux, AG., van der Zwaag, S., Seward, G. G. E., Seaton, N. C. A. & Prior, D. J., 2004, In : Materials Forum (CD-ROM). 28, p. 811-817 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  254. Influence of intercritical deformation on microstructure of TRIP steels containing Al

    Papaefthymiou, S., Bleck, W., Kruijver, SO., Sietsma, J., Zhao, L. & van der Zwaag, S., 2004, In : Materials Science and Technology. 20, p. 201-206 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  255. Influence of multiphase microstructure on the mechanical properties and fracture mechanisms of TRIP steel

    Papaefthymiou, S., Bleck, W., van der Zwaag, S. & Sietsma, J., 2004, Proceedings of the 2nd Hellenic Conference on Metallic Materials. Pantelis, DI. (ed.). Athens: Hellenic Metallurgic Society, p. 51-57 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  256. Investigation of ferrite softening processes in a 0.2 wt% C 1.5 wt% Mn steel after hot deformation.

    Smith, A., Hanlon, DN., Luo, H., Sietsma, J. & van der Zwaag, S., 2004, Solid state transformation and heat treatment. Hazotte, A. (ed.). Lausanne: Wiley-VCH Verlag, p. 175-180 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  257. Modelling recovery an recrystallization kinetics after intercritical deformation in 0.19wt% C1.5wt% Mn steel

    Smith, A., Miroux, AG., Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 329-334 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  258. Neutron depolarisation study of the austenite grain size in TRIP steels

    van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2004, In : Physica B: Condensed Matter. 350, p. e463-e466

    Research output: Contribution to journalArticleScientificpeer-review

  259. Novel liquid crystal thermoset resins for cryogenic fuel tank applications

    Dingemans, TJ., van der Zwaag, S., Knijnenberg, A., Weiser, E. S. & Jensen, B. J., 2004, 24th International Congress of the Aeronautical Sciences. Japan, p. 01-04 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  260. Observing individual grains during the evolution of the microstructure of steel

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  261. On the bond strength of aluminium foams bonded to sold aluminium

    Nieuwkoop, P., van der Zwaag, S. & Rizam A Majid, M. S., 2004, Society for the Advanced Material and Process Engineer. Green, J. E. (ed.). Madison: SAMPE, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  262. On the bond strength of aluminium foams bonded to solid aluminium

    Nieuwkoop, P., van der Zwaag, S. & Rizam Majid, M. S., 2004, In : SAMPE Journal. p. 1-15 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  263. Physical simulation of thermally induced martensite formation from retained austenite in TRIP steels

    Zhao, L., Vermolen, FJ., Sietsma, J. & van der Zwaag, S., 2004, Proceedings of the 4th International Conference on Physical and Numerical Simulation of Materials Processing.. Zhuanqi, H. (ed.). Shanghai: Journal of Materials Science and Technology, p. 105-108 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  264. Predicting the Effect of Alloy Composition on the Intermetallic Phase Transformation Kinetics in 6XXX Extrusion Alloys

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, Conference Proceedings of the 9th International Aluminum Alloys Conference. Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: s.n., p. 1040-1045 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  265. Predicting the effect of alloy composition on the intermetallic phase transformation kinetics in 6XXX extrusion alloys.

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, In : Materials Forum (CD-ROM). 28, p. 1040-1045 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  266. Property Optimisation in Fibre Metal Laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2004, In : Applied Composite Materials: an international journal for the science and application of composite materials. 11, p. 63-76 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  267. Quantifying anisotropic solute transport in protein crystals using 3-D laser scanning confocal microscopy visualization

    Cvetkovic, A., Straathof, AJJ., van der Wielen, LAM., van der Zwaag, S., Krishna, R. & Hanlon, DN., 2004, In : Biotechnology and Bioengineering. 86, 4, p. 389-398 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  268. Recovery Processes in the Ferrite Phase in C-Mn Steel

    Smith, A., Luo, H., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 7, p. 1188-1194 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  269. Recovery and recrystallisation of C-Mn steels in the intercritical region

    Luo, H., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2004, Proceedings of the 4th International Conference on Physical and Numerical Simulation of Materials Processing. Zhuangqi, H. (ed.). Shanghai: Journal of Materials Science and Technology, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  270. Recrystallisation Texture of Cold Rolled and Annealed IF Steel Produced from Ferritic Rolled Hot Strip

    Elsner, A., Kaspar, R., Ponge, D., Raabe, D. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 257-262 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  271. Recrystallisation and concurrent precipitation in hot rolled AA 3103

    Miroux, AG., Lok, ZJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 393-398 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  272. Recrystallisation and the rate of Mn precipitation in AA3103

    Lok, ZJ., Miroux, AG. & van der Zwaag, S., 2004, Proceedings of the 9th International Conference on Aluminium Alloys.. Morton Nie, JF., Muddel, BC., Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: Institute of Materials Engineering, p. 1073-1079 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  273. Reply to the discussion by Aaronson et al. to "Grain nucleation and growth during phase transformations" by S.E. Offerman et al., Science, 298, 1003 (Nov. 1, 2002)

    Offerman, SE., van Dijk, NH., Sietsma, J., van der Zwaag, S., Lauridsen, EM., Margulies, L., Grigull, S. & Poulsen, HF., 2004, In : Scripta Materialia. 51, p. 937-941 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  274. Simulation of Concurrent Precipitation Effect on Recrystallisation

    Miroux, AG., Anselmino, E. & van der Zwaag, S., 2004, Proceedings of the 9th International Conference on Aluminum Alloys.. Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: The Institute of Materials Engineering., p. 1104-1109 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  275. Size distributions and volume fractions of dispersoids in hot and cold processed AA3103

    Anselmino, E., Miroux, AG. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, June, p. 680-685 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  276. Solid-state phase transformations involving solute partitioning: modeling and measuring on the level of individual grains

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4757-4766 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  277. Solute level determination in AA1200 and AA3103

    Lok, ZJ., Löchte, L. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, p. 647-653 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  278. Stress reduction in a-C:H coatings through the addition of nitrogen to the feed gas

    Rabbani, F., Escobar Galindo, R., Arnoldbik, WM., van der Zwaag, S., van Veen, A. & Schut, H., 2004, In : Diamond and Related Materials. 13, p. 1645-1657 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  279. 2005
  280. 3DXRD microscopy for the study of solid-state phase transformation kinetics.

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2005, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 238, p. 107-110 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  281. An integrated study on the effect of pre- and post-extrusion heat treatments and surface treatment on the filiform corrosion properties of an aluminium extrusion alloy

    Mol, JMC., van de Langkruis, J., de Wit, JHW. & van der Zwaag, S., 2005, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, 11, p. 2711-2730 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  282. Analysis of the y - a transformation in a C-Mn steel by phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2005, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 36A, (9), p. 2327-2340 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  283. Application of the energy release rate approach for delamination growth in Glare

    Alderliesten, RC., Schijve, J. & van der Zwaag, S., 2005, In : Engineering Fracture Mechanics. p. 1-13 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  284. Contribution to the understanding of austenite stability in a 12Cr-9Ni-4Mo maraging steel

    San Martin, D., van Dijk, NH., Yagodzinsky, Y., Brück, E. & van der Zwaag, S., 2005, In : Materials Science Forum. 500-501, p. 339-346 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  285. Cross-diffusion controlled particle dissolution in metallic alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2005, In : Computing and Visualization in Science. 8, 1, p. 27-33 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  286. Dilatometric investigations on the decomposition of austenite in two medium-carbon steels with and without Cr and Mo additions

    Mertens, AIM., Brown, AJ., Zhao, L., McDermid, JR., van der Zwaag, S. & Sietsma, J., 2005, Material Science & Technology 2004. Baker, M. A. (ed.). Warrendale: Association for Iron & Steel Technology, p. 187-198 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  287. Effect of Strain Rate on the Subsequent Softening and Precipitation Kinetics in a Nb-Microalloyed Steel

    Luo, H., Qin, Y., Sietsma, J. & van der Zwaag, S., 2005, In : Steel Research International. 09, 76, p. 650-655 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  288. Ferrite/pearlite band prevention in dual phase and TRIP steels: Model development

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2005, In : ISIJ International. 45, 3, p. 380-387 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  289. Highlights of designing with Hylite - a new material concept

    Burchitz, I., boesenkool, B., van der Zwaag, S. & Tassoul, M., 2005, Delft Science in Design - A congress on Interdisciplinary Design. Mick Eekhout (ed.). Delft: Faculty of Architecture, p. 29-42 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  290. Improving the adhesion of thin stainless steel sheets for fibre metal laminates (FML) applications

    van Rooijen, RGJ., Sinke, J. & van der Zwaag, S., 2005, In : Journal of Adhesion Science and Technology. 19, p. 1387-1396 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  291. Improving the adhesion of thing stainless steel sheets for fibre metal laminate (FML) applications

    van Rooijen, RGJ., Sinke, J. & van der Zwaag, S., 2005, In : Journal of Adhesion Science and Technology. 19, 16, p. 1387-1396 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  292. In situ x-ray diffraction measurements of deformation-induced austenite to martensite transformation in a multiphase TRIP steel

    Zhao, L., van der Pers, NM., Sietsma, J. & van der Zwaag, S., 2005, In : Materials Science Forum. 500-501, p. 379-386 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  293. In-situ observations of recrystallisation in AA3103.

    Anselmino, E., Prior, D. J., Miroux, AG. & van der Zwaag, S., 2005.

    Research output: Contribution to conferencePosterProfessional

  294. Investigation of ferrite softening process in a 0.2 wt% C 1.5 wt% Mn steel after hot deformation

    Smith, A., Hanlon, DN., Luo, H., Sietsma, J. & van der Zwaag, S., 2005, Solid State Transformation and Heat Treatment. s.n. (ed.). Weinheim: Wiley-VCH Verlag, p. 175-180 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  295. Magnetically assisted martensitic transformation in a 12Cr-9Ni maraging steel

    San Martin, D., van Dijk, NH., Brück, E. & van der Zwaag, S., 2005, Proceedings of Stainless Steel World 2005. Donald Wiedemeyer, KCI. W. & Thierry Cassagne, C. (eds.). Zutphen: KCI Publishing, p. 374-379 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  296. Micro-scale Strain Distribution in Hot-worked Duplex Stainless Steel

    Hernandez castillo, L. E., Beynon, JH., Pinna, C. & van der Zwaag, S., 2005, In : Steel Research International. 76, 2/3, p. 137-141 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  297. Modeling nucleation and growth in multiphase steel using recent in-situ observations

    Offerman, SE., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2005, Modellierung und Simulation von Prozessen der Stahlerzeugung und Stahlverarbeitung. R., K. (ed.). Freiberg: TU Bergakademie, p. 97-112 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  298. Modeling of the transformation kinetics of the beta to alpha + beta transformation in Ti-4.5Fe-6.8Mo-1.5Al based on dilatometric results and the morphology of the alpha plates

    van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2005, Modeling and Simulation of Titanium Technology: Theory and Practices. Ellen Cerreta, Vasisht Venkatesh, F. Dax & Jaimie Tiley (eds.). Pittsburgh: TMS Publications, p. 63-77 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  299. Modelling the Deformation of Ultra Fine Grained Metals Using Statistical Mechanics Concepts

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2005, In : Iron & Steel. 40, p. 60-65 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  300. Phase field modelling of the interfacial condition at the moving interphase during the y - a transformation in C-Mn steels

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2005, In : Computational Materials Science. 34, 3, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  301. Review on some Stefan Problems for Particle Dissolution in Solid Metallic Alloys

    Vermolen, FJ., Vuik, C., Javierre Perez, E. & van der Zwaag, S., 2005, In : Nonlinear Analysis: modelling and control (online). 10, 3, p. 257-292 36 p.

    Research output: Contribution to journalArticleScientific

  302. Tailoring of Ostwald ripening behaviour in multicomponent Al alloys

    Rivera Diaz del Castillo, PEJ., Reischig, P. & van der Zwaag, S., 2005, In : Scripta Materialia. 52, 8, p. 705-708 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  303. The bearing strenght of Fiber Metal Laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2005, In : Journal of Composite Materials. 40, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  304. The dependence of the B-AlFeSi to x-Al(FeMn)Si transformation kinetics in Al-Mg-Si alloys on the alloying elements

    Kuijpers, NCW., Vermolen, FJ., Vuik, C., Koenis, PTG., Nilsen, KE. & van der Zwaag, S., 2005, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 395, p. 9-19 11 p.

    Research output: Contribution to journalArticleScientific

  305. Theory for diffusional transformation kinetics: Multicomponent and multiphase systems

    Rivera Diaz del Castillo, PEJ., Reischig, P., Xu, W. & van der Zwaag, S., 2005, In : Scripta Materialia. 53, 9, p. 1089-1094 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  306. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling

    van Dijk, NH., Butt, AM., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2005, In : Acta Materialia. 53, p. 5439-5447 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  307. 2006
  308. A comparison of numerical models for one-dimensional Stefan problems

    Javierre Perez, E., Vuik, C., Vermolen, FJ. & van der Zwaag, S., 2006, In : Journal of Computational and Applied Mathematics. 192, p. 445-459 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  309. A first step towards Self Healing in Aluminium alloys

    Hautakangas, SM., Schut, H., Rivera Diaz del Castillo, PEJ., van Dijk, NH. & van der Zwaag, S., 2006, Proceedings International Conference on New Frontiers in Light Metals. L. Katgerman (ed.). Delft: Delft University of Technology, p. 29-38 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  310. A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 595-602 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  311. A suite of sharp interface models for solid-state transformations in alloys

    Vermolen, FJ., Pinson, P., Vuik, C. & van der Zwaag, S., 2006, Proceedings of the ECCOMAS Computational Fluid Dynamics Conference.. Wesseling, P. & Onate, E. (eds.). Delft: Delft University of Technology, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  312. A themostatistical Model for Cell Formation in Two Dimensions

    Rivera Diaz del Castillo, PEJ., Huang, M. & van der Zwaag, S., 2006, TMS Letters, Proceedings of the TMS 2006 Annual Meeting. s.n. (ed.). p. 13-14 2 p. (TMS Letters; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  313. Analysis of gamma to alpha transformation in a Nb micro-alloyed-C-Mn steel by phase field modelling.

    Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 1431-1440 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  314. Analysis of nucleation and interfacial mobility for polygonal ferrite formation using phase field simulations.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2006, TMS Letters, Proceedings of the TMS 2006 Annual Meeting. Thoma, D. (ed.). USA: TMS, p. 15-16 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  315. Chapter 14: Modelling microchemistry. Simulation of alloy effects in aluminium

    Miroux, AG., Lok, ZJ., Anselmino, E. & van der Zwaag, S., 2006, Virtual Fabrication of Aluminium Products. Microstructural Modelling in Industrial Aluminium Fabrication Processes. J. Hirsch (ed.). Weinheim: Wiley-VCH, p. 199-212 14 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  316. Evolution of the mixed-mode character of solid-state phase transformations in metals involving solute partitioning.

    Sietsma, J., Mecozzi, MG., van Bohemen, SMC. & van der Zwaag, S., 2006, In : Zeitschrift fuer Metallkunde. 97, 4, p. 356-361 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  317. Experimental observations elucidating the mechanisms of structural bcc-hcp transformations in beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2006, In : Physical Review B (Condensed Matter and Materials Physics). 74, 13, p. 134114-1-13114-10

    Research output: Contribution to journalArticleScientificpeer-review

  318. Fibre metal laminates and constructions provided therewith

    van Rooijen, RGJ. & van der Zwaag, S., 2006, IPC No. Aangevraagd door TU Delft, Patent No. WO 2006/123928 A1, Priority date 23 Nov 2006

    Research output: PatentOther research output

  319. Higher dimensional numerical simulations of precipitate dissolution in multi-component aluminium alloys

    Javierre Perez, E., Vuik, C., Vermolen, FJ., Segal, A. & van der Zwaag, S., 2006, Proceedings of the ECCOMAS Computational Fluid Dynamics Conference.. Wesseling, P. & Onate, E. (eds.). Delft: Delft University of Technology, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  320. In-situ SEM observations of moving interfaces during recrystallisation

    van der Zwaag, S., Anselmino, E., Miroux, AG. & Prior, D. J., 2006, In : Materials Science Forum. 519-521, p. 1341-1348 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  321. Influence of concurrent precipitation on the nucleation kinetics during recrystallisation in AA3003

    Chen, SP., Miroux, AG. & van der Zwaag, S., 2006, In : Materials Science Forum. 519-521, p. 1605-1610 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  322. Laser-ultrasonic monitoring of austenite recrystallization in C-MN steel

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2006, In : ISIJ International. 46, 8, p. 1223-1232 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  323. Martensitic transformation of individual grains in multiphase metallic systems

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2006, In : Scripta Materialia.

    Research output: Contribution to journalArticleScientificpeer-review

  324. Modeling recrystallization kinetics in AA1050 following simulated break-down rolling

    Chen, SP. & van der Zwaag, S., 2006, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 37A, p. 2859-2869 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  325. Modelling Steady State Deformation in Metals by a Novel Thermostatistical Approach

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2006, Materials Proceeding of Materials Science and Technology 2006 conference and Exhibition. s.n. (ed.). Warrendale, PA 15086: The Minerals, Metals & Materials Society (TMS), p. 373-382 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  326. Modelling dispersoid precipitation during recrystallisation in AA3103.

    Lok, ZJ., Miroux, AG. & van der Zwaag, S., 2006, In : Materials Science Forum. 519-521, p. 443-448 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  327. Modelling of the effects of grain orientation on transformation-induced plasticity in multiphase carbon steels

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2006, In : Modelling and Simulation in Materials Science and Engineering. 14, p. 617-636 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  328. Modelling the stress relaxation kinetics of intercritically deformed austenite and ferrite in C-Mn steel

    Smith, A., Miroux, AG., Sietsma, J. & van der Zwaag, S., 2006, In : Steel Research International. 77, 8, p. 603-613 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  329. Modification of a thermomechanical model to predict constitutive behavior of Al-Mg-Si alloys.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 2006, In : Journal of Materials Engineering and Performance. 15, 6, p. 632-639 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  330. Navormbare PZT-LCT sensoren met hoge gevoeligheid en thermo-chemische stabilteit

    van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2006, IPC No. Aanvrager TU-Delft, Patent No. NL 466885-VB, Priority date 8 Dec 2006

    Research output: PatentOther research output

  331. Phase transformations in steel studied by 3DXRD-microscopy

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2006, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 246, p. 194-200 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  332. The Level Set Method for Solid-Solid Phase Transformations

    Javierre Perez, E., Vuik, C., Vermolen, FJ., Segal, A. & van der Zwaag, S., 2006, Proceedings of ENUMATH 2005. Bermudez de Castro, A. & Gomez, D. (eds.). Berlin: Springer, p. 712-719 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  333. The bearing strength of fibre metal laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2006, In : Journal of Composite Materials. 40, 1, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  334. The effect of thermal crosslinking on the formation of kink banks in high performance rigid-rod polymer fibres

    Knijnenberg, A., Dingemans, TJ. & van der Zwaag, S., 2006.

    Research output: Contribution to conferencePosterProfessional

  335. Three-dimensional phase field modelling of the austenite-to-ferrite transformation.

    Militzer, M., Mecozzi, MG., Sietsma, J. & van der Zwaag, S., 2006, In : Acta Materialia. 54, p. 3961-3972 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  336. 2007
  337. A mathematical approach to epidermal wound healing: Model Analysis and Computer Simulations

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2007, In : Reports of the Department of Applied Mathematical Analysis. 07, 14, p. 1-19 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  338. A new etching route for reveailing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

    San Martin, D., Rivera Diaz del Castillo, PEJ., Peekstok, ER. & van der Zwaag, S., 2007, In : Materials Characterization. 58, p. 455-460 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  339. A novel 2D analysis method to study individual grains using high-energy X-ray microbeam diffraction

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2007, In : Advances in X-Ray Analysis. 51, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  340. A three-dimensional model for particle dissolution in binary alloys.

    Vermolen, FJ., Javierre Perez, E., Vuik, C., Zhao, L. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 767-774 8 p.

    Research output: Contribution to journalArticleScientific

  341. An Introduction to Material Design Principles: Damage Preventation versus Damage Management

    van der Zwaag, S., 2007, Self Healing Materials an Alternative Approach to 20 Centuries of Materials Science. van der Zwaag, S. (ed.). Dordrecht: Springer, p. 1-18 18 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  342. An Investigation of the Self Healing Mechanism of Ionomer Based System

    Varley, R. J. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, AJM. & Zwaag, S. (eds.). Springer, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  343. Barrier free heterogeneous grain nucleation in polycrystalline materials: The austenite to ferrite phase transformation in steel

    van Dijk, NH., Offerman, SE., Sietsma, J. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 4489-4498 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  344. Belastingssensor

    van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2007, IPC No. International publication date, Patent No. 1030620, Priority date 11 Jul 2007

    Research output: PatentOther research output

  345. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels.

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Acta Materialia. 55, p. 6713-6723 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  346. Crack Healing of Advanced Machinable High Temperature Ti3AlC2 ceramics

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, A. J. M., Schmets, AJM., Zwaag, S. & Zwaag, S. (eds.). Springer, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  347. Een nieuw materiaal ontwerp perspectief: zelf-hertellende materialen

    Mookhoek, SD. & van der Zwaag, S., 2007, In : De Constructeur. 1/2, p. 38-40 3 p.

    Research output: Contribution to journalArticleProfessional

  348. Experimental observations on the correlation between microstructure and fracture of multiphase steels

    Papaefthymiou, S., Prahl, U., Bleck, W., van der Zwaag, S. & Sietsma, J., 2007, In : International Journal of Materials Research. 97, 12, p. 1723-1731 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  349. Ferrite formation during slow continuous cooling in steel.

    Offerman, SE., Stranglund, H., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Poulsen, HF., Agren, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 357-362 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  350. Ionomer for Self Healing Applications

    Varley, R. J. & van der Zwaag, S., 2007, In : Leonardo times. p. 40-41 2 p.

    Research output: Contribution to journalArticleProfessional

  351. Laser beam welding of an Oxide Dispersion Strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  352. Laser beam welding of an oxide dispersion strengthened super alloy

    Lemmen, H. J. K., Sudmeijer, KJ., Richardson, IM. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 13, p. 5286-5295 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  353. Laser-ultrasonic monitoring of ferrite recovery in ultra-low carbon steel.

    Smith, A., Kruger, S. E., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 458, p. 391-401 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  354. Load Sensor

    van den Ende, D. A., Rodrigues de Almeida, PM., Dingemans, TJ. & van der Zwaag, S., 2007, IPC No. International publication date, Patent No. WO 2007/073184 A1, Priority date 28 Jun 2007

    Research output: PatentOther research output

  355. Martensitic transformation of individual grains in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2007, In : Scripta Materialia. 56, p. 421-424 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  356. Materials are Forever

    van der Zwaag, S., 2007, In : Kunststof Magazine. p. 30-30 1 p.

    Research output: Contribution to journalArticleProfessional

  357. Micro- and macroscale simulations of transformation-induced plasticity in multiphase carbon steels

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007.

    Research output: Contribution to conferenceAbstractScientific

  358. Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters

    Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Computational Materials Science. 41, p. 107-116 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  359. Micromechanics-based modelling of properties and failure of multiphase steels.

    Prahl, U., Papaefthymiou, S., Uthaisangsuk, V., Bleck, W., Sietsma, J. & van der Zwaag, S., 2007, In : Computational Materials Science. 39, p. 17-22 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  360. Modeling and simulations of transformation-induced plasticity in multiphase carbon steels at micro- and macrfoscopic scales

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, 10th EUROMAT Conference. p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  361. Modelling Chi-Phase Precipitation in High Molybdenum Stainless Steels

    Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Advanced Materials Research. 15-17, p. 531-536 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  362. Modelling Deformation Structures in Metals Based on an Entropic Analysis

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 550, p. 571-576 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  363. Modelling Dynamic Recovery and Recrystallization of Metals by a New Non-Equilibrium Thermodynamics Approach

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science Forum. 558, p. 517-522 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  364. Modelling Steady State Deformation of FCC Metals by Non-Equilibrium Thermodynamics

    Huang, M., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Technology. 23, 9, p. 1105-1108 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  365. Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe-Cr-Ni-Mo stainless steel

    Xu, W., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 467, 1-2, p. 24-32 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  366. Modelling of the beta to alpha transformation in a metastable beta Ti alloy based on the kinetics and the morphology of the alpha plates.

    van Bohemen, SMC., van der Laars, M., Sietsma, J. & van der Zwaag, S., 2007, In : International Journal of Materials Research. 98, 6, p. 476-484 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  367. On the nature of the growth of bainitic alpha plates in metastable beta Ti alloys.

    van Bohemen, SMC., Sietsma, J. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 3684-3689 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  368. Onderzoek naar zichzelf reparerende materialen wint aan momentum

    van der Zwaag, S., 2007, In : Kunststof Magazine. 9, p. 32-35 4 p.

    Research output: Contribution to journalArticleProfessional

  369. Oxidation-induced crack healing in Ti3AlC2 ceramics

    Song, G., Pei, YT., Sloof, WG., Li, SB., Hosson, T. & van der Zwaag, S., 2007, In : Scripta Materialia. 58, p. 13-16 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  370. Piezoelectric and mechanical properties of novel composites of PZT and a liquid crytalline thermosetting resin

    van den Ende, D. A., de Almeida, P. & van der Zwaag, S., 2007, In : Journal of Materials Science. 42, 15, p. 6417-6425 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  371. Positron annihilation spectroscopy as a tool to develop self healing in aluminium alloys

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera, A. & van Dijk, NH., 2007, In : Physica Status Solidi. C: Current Topics in Solid State Physics. 4, 10, p. 3469-3472 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  372. Route to stable non-spherical emulsion droplets

    Bon, SAF., Mookhoek, SD., Colver, PJ., Fischer, H. & van der Zwaag, S., 2007, In : European Polymer Journal. 43, 11, p. 4839-4842 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  373. Self healing materials: An alternative approach to 20 centuries of materials science

    van der Zwaag, S., 2007, Springer. 388 p.

    Research output: Book/ReportBook editingScientificpeer-review

  374. Self-Healing Barrier Coating Using an Expandable Phase

    Micciche, F., Fischer, H., Varley, R. J. & van der Zwaag, S., 2007, First International Conference on Self Healing Materials. Schmets, AJM. & Zwaag, S. (eds.). Springer, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  375. Self-Healing in a NiTi Shape Memory Alloy Particulate Reinforced Aluminum Composite

    Thorat, RR., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2007, First International Conference on Self Healing. p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  376. Self-heaing Ti4AIC2 ceramic, a promising high temperature material for aerospace engineering

    Song, G. & van der Zwaag, S., 2007, In : Leonardo times. 4, p. 22-23 2 p.

    Research output: Contribution to journalArticleProfessional

  377. Self-healing TI3AIC2 ceramic

    van der Zwaag, S., 2007, In : Leonardo times. p. 22-23 2 p.

    Research output: Contribution to journalArticleProfessional

  378. Solute and second phase evolution during industrial processing of AA3103.

    Miroux, AG., Lok, ZJ., Marthinsen, K. & van der Zwaag, S., 2007, In : Materials Science Forum. 539-543, p. 281-286 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  379. The Creation of High Aspect Ratio Capsules to Improve the Efficiency of Self-Healing Polymer Systems

    Mookhoek, SD., Colver, PJ., Fischer, H., Bon, SAF. & van der Zwaag, S., 2007, First International Conference on Self Healing. Schmets, A. J. M. & Zwaag, S. (eds.). Springer, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  380. The Role of the Aging Temperature on the Self healing Kinetics in an Underaged AA2024 Aluminium Alloy

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera Diaz del Castillo, PEJ. & van Dijk, NH., 2007, First International Conference on Self Healing. Schmets, A. J. M. & Zwaag, S. (eds.). Springer, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  381. The role of aging temperatures in self healing aluminium alloys

    Hautakangas, SM., Schut, H., van der Zwaag, S., Rivera, A. & van Dijk, NH., 2007, Proceedings Self Healing Materials conference. Noordwijk, p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  382. Warmwalzstrategien fur IF und TRIP stahle

    Elsner, A., Ponge, D., Raabe, D., Steinhoff, K. & van der Zwaag, S., 2007, 22nd Achener Stahltagung. RWTH Aachen (ed.). Germany: RWTH, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  383. 2008
  384. A Micro-Raman study on compressive failure in thermo-chemically modified aramid single filaments

    Knijnenberg, A., Dingemans, TJ. & van der Zwaag, S., 2008, Polymer Fibres 2008. Milford, Surrey: Meetings Management, p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  385. A study on compressive failure in aramid based single filaments

    Knijnenberg, A., Dingemans, TJ. & van der Zwaag, S., 2008.

    Research output: Contribution to conferenceAbstractScientific

  386. Computational design of UHS stainless steel strengthened by multi-species nanoprecipitates combining genetic algorithms and Thermokinetics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, New Developments on Metallurgy and applications of high strength steels: Buenos Aires 2008. Warrendale: TMS, p. -

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  387. Design of highly formable and strong titanium alloys through plasticity induced transformation

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, TMS 2008 Annual Meeting & Exhibition. Cerreta, E., Venkatesh, V. & Evans, D. (eds.). Warrendale, USA: TMS (The Minerals, Metals & Materials Society), p. 357-362 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  388. Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Computational Materials Science. 44, p. 678-689 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  389. Development of a quasi-static test method to investigate the origin of self-healing in ionomers under ballistic conditions

    Varley, R. J. & van der Zwaag, S., 2008, In : Polymer Testing. 27, 1, p. 11-19 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  390. Early stages of oxidation of Ti3AlC2 ceramics

    Song, G., Pei, YT., Sloof, WG., Li, SB., Hosson, T. & van der Zwaag, S., 2008, In : Materials Chemistry and Physics. 112, p. 762-768 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  391. Een nieuwe materiaalkundige benadering voor een duurzame en veilige maatschappij

    van der Zwaag, S., 2008, In : Impulsen voor Economie en Samenleving. p. 21-22 2 p.

    Research output: Contribution to journalArticleProfessional

  392. Fabrication and mechanical properties of electroconductive high temperature ZrC particle-reinforced Ti3AlC2 composites

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2008, In : Journal of Computational and Theoretical Nanoscience. 5, 8, p. 1725-1729 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  393. Genetic alloy design based on thermodynamics and kinetics

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, 12, p. 1825-1833 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  394. Heal Thyself - Damage Management by Design

    Mookhoek, SD. & van der Zwaag, S., 2008, In : Plastics Innovations. 1, 44, p. 56-59 4 p.

    Research output: Contribution to journalArticleProfessional

  395. Irreversible thermodynamics modelling of plastic deformation of metals

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2008, In : Materials Science and Technology. 24, 4, p. 495-500 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  396. Isothermal martensitic transformation in a 12Cr-9Ni-4Mo-2Cu stainless steel in applied magnetic fields

    San Martin, D., Aarts, KWP., Rivera Diaz del Castillo, PEJ., van Dijk, NH., Brück, E. & van der Zwaag, S., 2008, In : Journal of Magnetism and Magnetic Materials. 320, p. 1722-1728 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  397. Moisture induced crack filling in barrier coatings containing montmorillonite as an expandable phase

    Micciche, F., Fischer, H., Varley, R. J. & van der Zwaag, S., 2008, In : Surface and Coatings Technology. 202, p. 3346-3353 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  398. Multi-capsule system and its use for encapsulating active agents

    WHITE, S. R., Mookhoek, SD., Fischer, H., van der Zwaag, S., Sottos, N. & Blaiszik, B. J., 2008, IPC No. application, Patent No. ILL19-121-US, Priority date 1 Jan 1800

    Research output: PatentOther research output

  399. Numerical modelling of epidermal wound healing

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2008, Numerical mathematics and advanced applications, proceedings of Enumath 2007. Kunisch, K., Of, G. & Steinbach, O. (eds.). Berlin-Heidelberg: Springer, p. 83-90 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  400. Ontwikkeling zelfherstellende materialen vertakt in meerdere onderzoekrichtingen

    van der Zwaag, S., 2008, In : Kunststof Magazine. 1, p. 32-34 3 p.

    Research output: Contribution to journalArticleProfessional

  401. Peripherally decorated binary microcapsules containing two liquids

    Mookhoek, SD., Blaiszik, B. J., Fischer, H., Sottos, N., WHITE, S. R. & van der Zwaag, S., 2008, In : Journal of Materials Chemistry. 18, p. 5390-5394 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  402. Polymeric material comprising multiple cavities

    Fischer, H., Mookhoek, SD. & van der Zwaag, S., 2008, IPC No. Nog niet eerder ingevoerd, Patent No. WO2008/125673 A1, Priority date 15 Apr 2008

    Research output: PatentOther research output

  403. Predicting the Strength and Ductility of Ultrafine Grained Interstitial Free Steels Using Irreversible Thermodynamics

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2008, New Developments on Metallurgy and Applications of High Strength Steels Buenos Aires 2008. s.n. (ed.). Buenos Aires: Materials Technology @ TMS, p. 805-812 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  404. Resolving Microstructural Changes during Ageing and Interrupted Ageing Using Thermoelectric Power

    Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, Aluminium Alloys, Proceedings of the 11th International Conference on Aluminium Alloys.. Hirsch, J., Skrotski, B., Gottstein, G. & Skrotzki, B. (eds.). Germany: Wiley VCH Weinheim, p. 763-769 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  405. Self healing of deformation damage in underaged Al-Cu-Mg alloys

    Hautakangas, SM., Schut, H., van Dijk, NH., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, In : Scripta Materialia. 58, p. 719-722 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  406. Strength, deformation, and fracture: A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061.

    Risanti, DD., Rivera Diaz del Castillo, PEJ., Bahrami, A., Miroux, AG. & van der Zwaag, S., 2008, Aluminium alloys, their physical and mechanical properties.. Hirsch, J., Skrotzi, B. & Gottstein, G. (eds.). sl: Wiley-VCH, p. 1457-1463 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  407. Strength-toughness optimisation scenarios through interrupted ageing in AA6061 and AA2024

    Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, Annual TMS Meeting and Exhibition. Yin, W. & Das, S. K. (eds.). Warrendale, USA: Minerals, Metals and Materials Soc, p. 79-84 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  408. The isothermal martensite formation in a maraging steel: a magnetic study

    San Martin, D., van Dijk, NH., Brück, E. & van der Zwaag, S., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 481-482, p. 757-761 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  409. The role of nucleation behaviour in phase field simulations of the austenite to ferrite transformation.

    Mecozzi, MG., Militzer, M., Sietsma, J. & van der Zwaag, S., 2008, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 39A, p. 1237-1247 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  410. Toughening of a ZrC particle-reinforced Ti3AlC2 composite

    Song, G., Sloof, WG., Li, SB. & van der Zwaag, S., 2008, Proceedings of the 32nd international conference & exposition on advanced ceramics and composites. Ohji, T. & Wereszczak, A. (eds.). Daytona Beach, USA: The American ceramic society, p. 31-40 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  411. Towards an understanding of thermally activated self-healing of an ionomer system during ballistic penetration

    Varley, R. J. & van der Zwaag, S., 2008, In : Acta Materialia. 56, 19, p. 5737-5750 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  412. Transformation-induced plasticity in multiphase steels subjected to thermal-mechanical loading

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2008, In : Philosophical Magazine (London, 2003). 88, p. 3369-3387 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  413. Using Genetic algorithm to design new ultra-high strength stainless steels reinforced by separate precipitate families

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2008, European Stainless steels conference 2008. Karjalainen, P. & Hertzman, S. (eds.). Stockholm: Swedish Steel producers' Association, p. 259-267 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  414. Verf met klei

    van der Zwaag, S., 2008, In : Delft Integraal. 4, p. 4-4 1 p.

    Research output: Contribution to journalArticleProfessional

  415. Zelfherstellende materialen: een blik in de toekomst

    van der Zwaag, S., 2008, In : Kunststof Magazine. 2, p. 32-35 4 p.

    Research output: Contribution to journalArticleProfessional

  416. 2009
  417. A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  418. A constructive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Mechanics of Materials. 41, 9, p. 982-988 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  419. A mathematical analysis of physiological and morphological aspects of wound closure

    Javierre Perez, E., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2009, In : Journal of Mathematical Biology. 59, p. 605-630 26 p.

    Research output: Contribution to journalArticleScientificpeer-review

  420. A microchechanical study of the deformation behavior of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  421. A micromechanical study of the deformation behaviour of TRIP-assisted multiphase steels as a function of the microstructural parameters of the retained austenite

    Tjahjanto, DD., Turteltaub, SR., Suiker, ASJ., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Advanced Engineering Materials. 11, 3, p. 153-157 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  422. A numerical study into the effect of elongated capsules on the healing efficiency of liquid-based systems

    Mookhoek, SD., Fisher, H. & van der Zwaag, S., 2009, In : Computational Materials Science. 47, p. 506-511 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  423. A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

    Risanti, DD., Yin, M., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 523, 1-2, p. 99-111 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  424. Analysis of fracture and healing processes in self-healing thermoplastic systems using quantitatieve x-ray microtomgraphy

    Mookhoek, SD., Mayo, SC., Hughes, A. E., Furman, SA., Fischer, H. & van der Zwaag, S., 2009, 14th international conference on deformation, yield and fracture of polymers. s.n. (ed.). London, UK: IOM Communications, p. 317-320 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  425. Biderectional current-voltage converters based on magnetostrictive/piezoelectric composites

    Jia, Y., Or, SW., Chan, HL., Luo, H. & van der Zwaag, S., 2009, In : Japanese Journal of Applied Physics. Part 2, Letters & Express Lettres. 94, 263504, p. 1-3 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  426. Computational design of UHS maraging stainless steel incorporating compositions as well as austenisation and ageing temperatures as optimisation parameters

    Xu, W., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : Philosophical Magazine (London, 2003). 89, 20, p. 1647-1661 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  427. Computing interfaces in diverse applications

    Javierre Perez, E., Vermolen, FJ., Vuik, C., Wesseling, P. & van der Zwaag, S., 2009, ECCOMAS Multidisciplinary jubilee symposium: New computational challenges in materials, structures, and fluids. Mang, H. A. & Periaux, J. (eds.). Berlin: Springer, p. 327-340 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  428. Design of novel high strength Titanium alloys on the basis of intentional plasticity induced transformations

    van der Zwaag, S., Rivera Diaz del Castillo, PEJ. & Neelakantan, S., 2009, In : Cbm Metal Matters. 14, p. 18-19 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  429. Eerste toepassingen selfhealing coatings over vijf jaar verwacht

    van der Zwaag, S. & Mol, A., 2009, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 3, p. 30-33 4 p.

    Research output: Contribution to journalArticleProfessional

  430. Genetic computational design of novel ultra high strength stainless steels: model description and first experimental validation

    Xu, W., del Castillo, PEJRD., Yang, K. & van der Zwaag, S., 2009, TMS 2009 138th annual meeting & exhibition - supplemental proceedings, vol 2: Materials characterization, computation andn modelling. s.n. (ed.). San Francisco, USA: TMS, p. 319-326 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  431. Increase in strength of beta Ti-10V-2Fe-3A1 alloy via Plasticity induced Transformation

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, IPC No. Aangevraagd door M2I en TU Delft, Priority date 1 Mar 2008

    Research output: PatentOther research output

  432. Liquid crystalline matrix polymres for aramid ballistic composites

    de Ruijter, C., van der Zwaag, S., stolze, R. & Dingemans, TJ., 2009, In : Polymer Composites. 31, 4, p. 612-619 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  433. Method for producing a titanium alloy article and an article procuced from a titanium alloy

    Neelakantan, S., van der Zwaag, S. & Rivera Diaz del Castillo, PEJ., 2009, IPC No. Aanvrager M2i en TU Delft, Patent No. 2002499, Priority date 9 Dec 2010

    Research output: PatentOther research output

  434. Modelling the steady state deformation stress under various deformation conditions using a single irreversible thermodynamics based formulation

    Huang, M., del Castillo, PEJRD., Bouaziz, O. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 12, p. 3431-3438 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  435. Modelling the strength of ultrafine-grained an nanocrystalline fcc metals

    Huang, M., Rivera Diaz del Castillo, PEJ., Bouaziz, O. & van der Zwaag, S., 2009, In : Scripta Materialia. 61, p. 1113-1116 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  436. On measurement of retained austenite in multiphase TRIP steels - results of blind round robin test involving six different techniques.

    Jacques, PJ., Allain, S., Bouaziz, O., De, A., Gourgues, A-F., Hance, BM., Houbaert, Y., Huang, J., Iza-Mendia, A., Kruger, S. E., Radu, M., Samek, L., Speer, J., Zhao, L. & van der Zwaag, S., 2009, In : Materials Science and Technology. 25, 5, p. 567-574 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  437. On the production and properties of novel particulate niti/AA2124 metal matrix composites

    San Martin, D., Risanti, DD., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 250`-252

    Research output: Contribution to journalArticleScientificpeer-review

  438. On the production and properties of novel particulate nitip/aa2124 metal matrix composites

    San Martin, D., Risanti, DD., Garces, G., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 526, 1-2, p. 250-252 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  439. On the transformation behaviour of niti particulate reinforced aa2124 composites

    Thorat, RR., Risanti, DD., San Martin, D., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Journal of Alloys and Compounds. 477, p. 307-315 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  440. Phase-field simulations of coarsening of Al6Mn precipitates located on grain boundaries in Al alloys.

    Moelens, N., Miroux, AG., Anselmino, E., van der Zwaag, S., Blanpain, B. & Wollants, P., 2009, Supplemental Proceedings of the 2009 TMS Annual Meeting & Exhibition: Materials Characterization, Computation and Modeling.. s.n. (ed.). Warrendale, US: The Minerals, Metals & Materials Society (TMS), p. 303-310 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  441. Plasticity induced transformation in a metastable beta Ti-1023 alloy by controlled heat treatments

    Neelakantan, S., San Martin Fernandez, DM., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Materials Science and Technology. 25, 11, p. 1351-1358 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  442. Polymeric material having an anisotropic shape, useful in the composite material, which is useful to make an article, comprises multiple cavities comprising a functionsl liquid, which is dicyclopentadiene monomer

    Fischer, H., Mookhoek, SD. & van der Zwaag, S., 2009, IPC No. Patent Assignee(s): Stichting Dutch Polymer Inst. (DUP-Non-standard), Patent No. WO2008125673-A1, Priority date 23 Oct 2008

    Research output: PatentOther research output

  443. Predicting the stress-strain behaviour of carbon steel under hot working conditions: an irreversible thermodynamics model

    Huang, M., del Castillo, PEJRD., Perlade, A. & van der Zwaag, S., 2009, In : Scripta Materialia. 61, 6, p. 648-651 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  444. Prediction of the martensite start temperature for beta titanium alloys as a function of composition

    Neelakantan, S., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2009, In : Scripta Materialia. 60, 8, p. 611-614 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  445. Self-healing behaviour in man-made engineering materials: bio-inspired but taking into account their intrinsic character

    van der Zwaag, S., van Dijk, NH., Jonkers, HM., Mookhoek, SD. & Sloof, WG., 2009, In : Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences. 367, p. 1689-1704 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  446. Structure and properties of aramid fibres

    van der Zwaag, S., 2009, Handbook of textitle fibre structure. M Jaffe SJ Eichhorn, JWS. H. (ed.). UK: Woodhead Publishing, p. 394-412 508 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  447. The composition and temperature effects on the ultra high strength stainless steel design

    Xu, W., del Castillo, PEJRD. & van der Zwaag, S., 2009, In : International Journal of Modern Physics B: condensed matter physics: statistical physics: applied physics. 23, 6-7, p. 1060-1065 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  448. The effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 5, p. 533-543 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  449. Toughening of a ZrC particle-reinforced Ti3AlC2 composite

    Song, G., Xu, Q., Sloof, W. G. & van der Zwaag, S., 2009, Mechanical properties and processing of ceramic binary, ternary and composite systems. s.n. (ed.). Daytona Beach, Florida, USA: Wiley, p. 31-39 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  450. 2010
  451. A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Yan, W., Yang, K., San Martin, D., van der Zwaag, S. & Kestens, LAI., 2010, In : Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  452. Application of the cyclic phase tranformation concept for investigating growth kinetics of solid-state partitioning phase transformations

    Chen, H. & van der Zwaag, S., 2010, In : Computational Materials Science. 49, p. 801-813 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  453. Applying SEM-Based X-ray microtomography to observe self-healing in solvent encapsulated thermoplastic materials

    Mookhoek, SD., Mayo, SC., Hughes, A. E., Furman, SA., Fischer, H. & van der Zwaag, S., 2010, In : Advanced Engineering Materials. 12, 3, p. 228-234 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  454. Autonomous damage initiated healing in a thermo-responsive ionomer

    Varley, R. J. & van der Zwaag, S., 2010, In : Polymer International. 59, 8, p. 1031-1038 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  455. Characterization of the adhesion of single-walled carbon nanotubes in poly (p-phenylene terephthalamide) composite fibres

    Deng, L., Young, RJ., van der Zwaag, S. & Picken, SJ., 2010, In : Polymer. 51, p. 2033-2039 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  456. Characterization of ultra-high temperature ablation of Ti2AlC ceramics under oxyacetylene flame

    Song, G., Li, S., Zhao, C., Sloof, WG., van der Zwaag, S., Pei, YT. & Hosson, T., 2010, Proceedings of the 7th International Conference on High Temperature Ceramic Materials and Composites. Krenkel, W. & Lamon, J. (eds.). Berlijn: AVISO Verlagsgesellschaft, p. 806-811 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  457. Development of temperature stable charge based piezoelectric composite quasi-static pressure sensors

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2010, In : Sensors and Actuators A: Physical: an international journal devoted to research and development of physical and chemical transducers. 163, 1, p. 25-31 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  458. Fabricacion y caracterizacion de un nuevo material compuesto AA2124/nitip

    San Martin, D., Risanti, DD., Garces, G., Alcala, G., Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2010, Proceedings of: XI Congreso Nacional de Materiales. Barreda, JJS. (ed.). Zaragoza, Spain: Universitat Jaume-1, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  459. Genetic alloy design of ultra high strength stainless steels: from thermodynamics to quantum mechanics

    Rivera Diaz del Castillo, PEJ., Xu, W. & van der Zwaag, S., 2010, In : Materials Science Forum. 638-642, Part 1-4, p. 3473-3478 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  460. Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by ni3ti intermetallic nanprecipitates

    Xu, W., Rivera Diaz del Castillo, PEJ., Wang, W., Bliznuk, V., Kestens, LAI. & van der Zwaag, S., 2010, In : Acta Materialia. 58, 10, p. 3582-3593 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  461. Improving the d(33) and g(33) properties of 0-3 piezoelectric composites by dielectrophoresis

    van den Ende, DA., bory, BF., Groen, WA. & van der Zwaag, S., 2010, In : Journal of Applied Physics. 107, 2

    Research output: Contribution to journalArticleScientificpeer-review

  462. In situ determination of aging precipitation in deformed Fe-Cu and Fe-Cu-B-N alloys by time-resolved small-angle neutron scattering

    He, S., van Dijk, NH., Paladugu, MC., Schut, H., Kohlbrecher, J., Tichelaar, FD. & van der Zwaag, S., 2010, In : Physical Review B (Condensed Matter and Materials Physics). 82, 174111, p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  463. Kansen op herstel

    van der Zwaag, S., 2010, Consensor 2.0 Kansen in beton/inspelen op trends en ontwikkelingen. Rotterdam: ConSensor BV, p. 9-11

    Research output: Chapter in Book/Report/Conference proceedingChapterPopular

  464. Mechanical properties of low temperature synthesized dense and fine-grained cr2alc ceramics

    Li, SB., Yu, WB., Zhai, HX., Song, G., Sloof, WG. & van der Zwaag, S., 2010, In : Journal of the European Ceramic Society. 31, 1-2, p. 217-224 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  465. Properties of quasi 1-3 piezoelectric pzt-epoxy composites obtained by dielectrophoresis

    van den Ende, DA., bory, BF., Groen, WA. & van der Zwaag, S., 2010, In : Integrated Ferroelectrics. 114, 1, p. 108-118 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  466. Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach

    Xu, W. & van der Zwaag, S., 2010, Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach. DeArdo, AJ. & Pontremoli, M. (eds.). Peschiera del Garda (Verona), Italy: Associazione Italiana di Metallurgia, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  467. Real-time martensitic transformation kinetics in maraging steel under high magnetic fields

    San Martin, D., van Dijk, NH., Jimenez-Melero, E., Kampert, E., Zeitler, U. & van der Zwaag, S., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 527, 20, p. 5241-5245 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  468. Routes and mechanisms towards self healing behaviour in engineering materials

    van der Zwaag, S., 2010, In : Bulletin of The Polish Academy of Sciences. . Technical Sciences. 58, 2, p. 215-224 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  469. Self-healing in nanoparticle-reinforced and other polymer systems

    Picken, SJ., Mookhoek, SD., Fischer, H. & van der Zwaag, S., 2010, Optimization of polymer of polymer nanocomposite properties. Mittal, V. (ed.). Weinheim: Wiley-VCH, p. 261-278 418 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  470. Self-healing materials

    Hager, MD., Greil, P., Leyens, C., van der Zwaag, S. & Schubert, US., 2010, In : Advanced Materials. 22, p. 5424-5430 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  471. Teaching ethics to engineering students: from clean concepts to dirty tricks: the impact of practical circumstances and personal relationships on ethical decision-making

    Kroesen, JO. & van der Zwaag, S., 2010, Philosophy and engineering: an emerging agenda. Goldberg, DE. & van de Poel, IR. (eds.). Dordrecht / New York / Berlin: Springer, p. 127-137 361 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  472. The effect of cluster plasticisation on the self healing behaviour of ionomers

    Varley, R. J., Shen, S. & van der Zwaag, S., 2010, In : Polymer. 51, 3, p. 679-686 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  473. The generation of deformation damage during fatigue loading in Al-Cu alloy studied by the Doppler Broadening technique

    Ruiz Ripoll, ML., Schut, H., Alderliesten, RC., van der Zwaag, S. & Benedictus, R., 2010, 12th International Workshop on Slow Positron Beam Techniques SLOPOS 12. Buckman, S. (ed.). Magnetic Island, N.Queensland, Australia: ARC Centre of Excellence for Antimatter-Matter Studies, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  474. The influence of the lateral filament texture on the compressive properties of pppta aramid filaments

    Knijnenberg, A., Koenders, BM., Gebben, B., Klop, E., Young, RJ. & van der Zwaag, S., 2010, In : Journal of Materials Science. 45, 10, p. 2708-2714 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  475. The mechanical properties of aa2024 as funcion of the interrupted ageing conditions

    Risanti, DD., Yin, M., Chen, J. & van der Zwaag, S., 2010, In : Materials Science Forum. p. 638-642 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  476. Thermally activated precipitation at deformation induced defects in Fe-Cu and Fe-Cu-B-N alloys studied by positron annihilation spectroscopy

    He, S., van Dijk, NH., Schut, H., Peekstok, ER. & van der Zwaag, S., 2010, In : Physical Review B (Condensed Matter and Materials Physics). 81, 094103, p. 094103-1-094103-10

    Research output: Contribution to journalArticleScientificpeer-review

  477. Towards the development of self healing aluminium alloys to enhance the lifetime of components under fatigue load

    Ruiz Ripoll, ML., Schut, H., van der Zwaag, S., Alderliesten, RC. & Benedictus, R., 2010, Proceedings of the 18th European Conference on Fatigue. s.n. (ed.). s.l.: IOP Self Healing Materials, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  478. 2011
  479. A critical appraisal of the potential of self healing polymeric coatings

    Garcia Espallargas, SJ., Fisher, H. & van der Zwaag, S., 2011, In : Progress in Organic Coatings. 72, 3, p. 211-221 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  480. A mixed-mode model considering soft impingement effects for solid-state partitioning phase transformations

    Chen, H. & van der Zwaag, S., 2011, Solid-Solid phase transformations in inorganic materials. Brechet, Y., Clouet, E., Deschamps, A., Finel, A. & Soisson, F. (eds.). Trans Tech Publications, p. 561-566 6 p. (Solid State Phenomena; vol. 172-174).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  481. Alternatieven voor zeldzame grondstoffen ontwerpen; Vervangingstechniek

    van der Zwaag, S., 2011, In : De Ingenieur. p. 20-22 3 p.

    Research output: Contribution to journalArticleProfessional

  482. Application of cyclic partial phase transformations for identifying kinetic transitions during solid-state phase transformations: Experiments and modeling

    Chen, H., Appolaire, B. & van der Zwaag, S., 2011, In : Acta Materialia. 59, 17, p. 6751-6760 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  483. First-principles and genetic modelling of precipitation sequences in aluminium alloys

    de Jong, M., Dutta, RK., Sluiter, MHF., Miroux, AG., van der Zwaag, S., Sietsma, J. & Rivera Diaz del Castillo, PEJ., 2011, In : Solid State Phenomena. 172-174, p. 285-290 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  484. Herstel zonder onderhoud

    van der Zwaag, S., 2011, In : Maintenance Management. 10, p. 34-35 2 p.

    Research output: Contribution to journalArticleProfessional

  485. In situ synchrotron study on the interplay between martensite formation, texture evolution and load partitioning in low-alloyed TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Wright, JP. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, p. 6407-6416 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  486. Influence of alpha morphology and volume fraction on the stress-induced martensitic transformation in Ti-10V-2Fe-3Al

    Li, C., Wu, X., Chen, H. & van der Zwaag, S., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 528, 18, p. 5854-5860 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  487. Invited topical review: Liquid crystal main-chain polymers for high-performance fibre applications

    Picken, SJ., Sikkema, DJ., Boerstoel, H., Dingemans, TJ. & van der Zwaag, S., 2011, In : Liquid Crystals: an international journal in the field of anisotropic fluids. 38, p. 1591-1605 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  488. Microstructural control of the austenite stability in low-alloyed trip steels

    Blonde, RJP., Jimenez, E., van Dijk, NH., Brueck, EH., Zhao, L., Sietsma, J. & van der Zwaag, S., 2011, In : Solid State Phenomena. 172-174, p. 196-201 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  489. Modeling of soft impingement effect during solid-state partitioning phase transformations in binary alloys

    Chen, H. & van der Zwaag, S., 2011, In : Journal of Materials Science. 46, 5, p. 1328-1336 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  490. Modelling the strongest grain size in nanocrystalline FCC metals

    Huang, M., Bouaziz, O. & van der Zwaag, S., 2011, In : Materials Letters. 65, p. 3128-3130 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  491. Numerical modelling of the self healing response of coatings based on expansive phases

    Javierre, E., Rey, R., Perez, MA., Garcia Espallargas, SJ., van der Zwaag, S. & Garcia-Aznar, JM., 2011, Proceedings of CMNE 2011. Rodriguez-Ferran, A. (ed.). Coimbra, Portugal: CMNE, p. 2220-2225 6 p. (Surface and Coatings Technology; vol. 206).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  492. Parametric study of multiphase TRIP steels undergoing cyclic loading

    Tjahjanto, DD., Suiker, ASJ., Turteltaub, SR. & van der Zwaag, S., 2011, In : Computational Materials Science. 50, 2011, p. 1490-1498 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  493. Property and cost optimisation of novel uhs stainless steels via a genetic alloy design approach

    Xu, W. & van der Zwaag, S., 2011, In : ISIJ International. 51, 6, p. 1005-1010 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  494. Synthesis and characterization of silica microcapsules using a sustainable solvent system template

    Galgali, GS., Schlangen, E. & van der Zwaag, S., 2011, In : Materials Research Bulletin. 46, 12, p. 2445-2449 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  495. The effect of calcining temperature on the properties of 0-3 piezoelectric composites of PZT and a liquid crystalline thermosetting polymer

    van den Ende, DA., Groen, WA. & van der Zwaag, S., 2011, In : Journal of Electroceramics. 27, 1, p. 13-19 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  496. The generation of derformation damage during fatigue loading in AL-Cu alloy studied by the doppler broadening technique

    Ruiz-Ripoll, ML., Schut, H., van Dijk, NH., Alderliesten, RC., van der Zwaag, S. & Benedictus, R., 2011, Proceedings of SLOPOS 12. Buckman, S. (ed.). Magnetic Island, Australia: IOPscience, p. 1-4 4 p. (Journal of Physics: Conference Series; vol. 262).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  497. Ultra-high temperature ablation behavior of Ti2AlC ceramics under an oxyacetylene flame

    Song, G., Li, S., Zhao, C., Sloof, WG., van der Zwaag, S., Pei, YT. & Hosson, T., 2011, In : Journal of the European Ceramic Society. 31, p. 855-862 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  498. Zelfherstellende materialen

    van der Zwaag, S., 2011, In : Asfalt. 1, 38, p. 13-14 2 p.

    Research output: Contribution to journalArticleProfessional

  499. 2012
  500. Ab-initio modeling of metastable precipitation processes in aluminum 7xxx alloys

    de Jong, M., van der Zwaag, S. & Sluiter, MHF., 2012, In : International Journal of Materials Research. 103, 8, p. 972-979 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 Next

ID: 142717