1. 2005
  2. The bearing strenght of Fiber Metal Laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2005, In : Journal of Composite Materials. 40, p. 5-19 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. The dependence of the B-AlFeSi to x-Al(FeMn)Si transformation kinetics in Al-Mg-Si alloys on the alloying elements

    Kuijpers, NCW., Vermolen, FJ., Vuik, C., Koenis, PTG., Nilsen, KE. & van der Zwaag, S., 2005, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 395, p. 9-19 11 p.

    Research output: Contribution to journalArticleScientific

  4. Theory for diffusional transformation kinetics: Multicomponent and multiphase systems

    Rivera Diaz del Castillo, PEJ., Reischig, P., Xu, W. & van der Zwaag, S., 2005, In : Scripta Materialia. 53, 9, p. 1089-1094 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling

    van Dijk, NH., Butt, AM., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2005, In : Acta Materialia. 53, p. 5439-5447 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. 2004
  7. A Statistical Mechanics Theory of Grain Deformation and its Prediction of Dynamical Recovery and Recrystallization

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 87-92 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. A comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of AA1050

    Chen, SP. & van der Zwaag, S., 2004, In : Journal of Testing and Evaluation. 32, 4, p. 290-297 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. A concise model for mixed-mode phase transformations in the solid state

    Sietsma, J. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4143-4152 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. A metallurgical Interpretation of the Static Recrystallization Kinetics of an Intercritically deformed C-Mn Steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 6, p. 1889-1898 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. A model for Ferrite/Pearlite band formation and prevention in steels

    Rivera Diaz del Castillo, PEJ., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 2, p. 425-433 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. A model of the beta-AlFeSi to alpha-A1(FeMn)Si transformation during homogenization in 6xxx alloys

    Vermolen, FJ., Kuijpers, NCW., Vuik, C., Koenis, PTG., Nilsen, K. E. & van der Zwaag, S., 2004, Proceedings of the Eight international aluminum extrusion technology seminar. Rajski, GT. (ed.). Wouconda, Ill, US: ET Foundation, p. 57-65 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  13. A morphological study of filiform corrosive attack on cerated AA2024-T351 alluminium alloy

    Hughes, A. E., Mol, JMC., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 47, p. 107-124 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. A morphological study of filiform corrosive attack on chromated and alkaline-cleaned AA2024-T351 aluminium alloy

    Mol, JMC., Hughes, A. E., Hinton, BRW. & van der Zwaag, S., 2004, In : Corrosion Science: the journal on environmental degradation of materials and its control. 46, 5, p. 1201-1224 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. A novel observation of strain-induced ferrite-to-austenite retransformation after intercritical deformation of C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35A, 9, p. 2789-2797 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. A quantitative description of multicomponent growth of needle-shaped prcipitates in non-ideal solutions

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, 10th World Conference on Titanium. Prof. Dr. G. Lutjering & Prof.Dr. J. Albrecht (eds.). Weinheim: Wiley-VCH, p. 1083-1089 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  17. A single grain approach applied to the modeling of recrystallization kinetics for cold rolled single-phase metals

    Chen, SP. & van der Zwaag, S., 2004, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 35(A), 3, p. 741-749 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Advanced models for particle dissolution in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, Solid state transformation and heat treatment, part 1: Precipitation and diffusion processes. Hazotte, A. (ed.). Weinheim: Wiley-VCH, p. 53-61 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  19. Assuring Microstructural Homogenity in Dual Phase and Trip Steels

    Rivera Diaz del Castillo, PEJ. & van der Zwaag, S., 2004, In : Steel Research International. 75, p. 711-715 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Characteristics of the static recrystallisation kinetics of an intercritically deformed C-Mn steel

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 293-298 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Controlling retained austenite stability in TRIP steel

    Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  22. Determination of Fatigue Damage at Precipitate Level in 2024-T3 using Positron Annihilation and Nuclear Magnetic Resonance

    van der Zwaag, S., van Veen, A., Schut, H., Hill, AJ. & Bastow, T. J., 2004, Conference Proceeding for the 9th International Aluminum Alloys Conference. Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: Institute of Materials Engineering Australasia Ltd, p. 363-368 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  23. Determination of microscale deformation in hot worked steel

    Hernandez castillo, L. E., Beynon, JH., Pinna, C. & van der Zwaag, S., 2004, Metal Forming 2004. Krakow, p. 387-392 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  24. Dielectric characterization of a series wholly aromatic poly(ether imide)s

    Dingemans, TJ., Mayingi, J., van der Zwaag, S. & Wübbenhorst, M., 2004.

    Research output: Contribution to conferencePosterProfessional

  25. Dilatometric investigations on the decomposition of austenite in two medium-carbon steels with and without Cr and Mo additions

    Mertens, AIM., Brown, A., Zhao, L., McDermid, JR., Sietsma, J. & van der Zwaag, S., 2004, Materials Science & Technology (MS&T) 2004 Conference Proceedings. s.n. (ed.). Wallendale: AIST & TMS, p. 187-198 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  26. Dispersoid quantification and size distribution in hot and cold processed AA3103

    Anselmino, E., Miroux, AG. & van der Zwaag, S., 2004, In : Materials Characterization. 52, 4-5, p. 289-300 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Effect of inhomogeneous deformation on the recrystallization kinetics of deformed metals

    Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 11, p. 1931-1936 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Evaluation of the applicability of a thermomechanical model to industrial extrusion experiments of AA6063

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 2004, Proceedings 8th International Aluminum Extrusion Technology Seminar ET 2002. Fellom, AM., Rajsky, GT., Skillingberg, MH. & Werner, RI. (eds.). Wauconda: ET Foundations, p. 253-258 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  29. Evolving microstructures in carbon steel studied by 3DXRD microscopy

    Offerman, SE., Zijden, ACP., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, Evolution of deformation microstructures in 3D. Gundlach, G., Haldrup, K., Hansen, N., Huang, X., Juul Jensen, D., Leffers, T., Li, ZJ., Nielsen, SF., Pantleon, W., Wert, JA. & Winther, G. (eds.). Roskilde: Riso national Laboratory, p. 471-480 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  30. Experimental measurement of microchemistry evolution during processing of AA3103

    Miroux, AG., Lok, ZJ., Anselmino, E., Flemming, A. J. E., Bigot, A., Janot, E., Hagström, J., Liu, C., Dons, AL., Lötche, L. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, 6, p. 655-660 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Ferrite nucleation and growth in medium-carbon steel studied by 3DXRD microscopy

    Offerman, SE., Zijden, ACP., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, MS&T conference proceedings. Baker, MA. (ed.). Association for Iron & Steel Technology, p. 227-234 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  32. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2004, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Highlights of designing with Hylite - a new material concept

    Burchitz, I., boesenkool, B., van der Zwaag, S. & Tassoul, M., 2004, In : Materials and Design. 26, 4, p. 271-279 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. In-situ Observations of Recrystallisation in AA3103 using FEG-SEM and EBSD

    Anselmino, E., van der Zwaag, S., Seward, G. G. E., Seaton, N. C. A. & Prior, D. J., 2004, Conference Proceeding for the 9th International Aluminum Alloys Conference. Fellom, AM., Rajsky, GT., Skillingberg, MH. & Werner, RI. (eds.). Brisbane: ET Foundations, p. 811-817 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  35. In-situ determination of the ferrite nucleation and growth rates and its relation to the austenite grain size distribution

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004.

    Research output: Contribution to conferenceAbstractScientific

  36. In-situ observations of recrystallisation in AA3103 using FEG-SEM and EBSD.

    Anselmino, E., Miroux, AG., van der Zwaag, S., Seward, G. G. E., Seaton, N. C. A. & Prior, D. J., 2004, In : Materials Forum. 28, p. 811-817 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Influence of intercritical deformation on microstructure of TRIP steels containing Al

    Papaefthymiou, S., Bleck, W., Kruijver, SO., Sietsma, J., Zhao, L. & van der Zwaag, S., 2004, In : Materials Science and Technology. 20, p. 201-206 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Influence of multiphase microstructure on the mechanical properties and fracture mechanisms of TRIP steel

    Papaefthymiou, S., Bleck, W., van der Zwaag, S. & Sietsma, J., 2004, Proceedings of the 2nd Hellenic Conference on Metallic Materials. Pantelis, DI. (ed.). Athens: Hellenic Metallurgic Society, p. 51-57 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  39. Investigation of ferrite softening processes in a 0.2 wt% C 1.5 wt% Mn steel after hot deformation.

    Smith, A., Hanlon, DN., Luo, H., Sietsma, J. & van der Zwaag, S., 2004, Solid state transformation and heat treatment. Hazotte, A. (ed.). Lausanne: Wiley-VCH, p. 175-180 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  40. Modelling recovery an recrystallization kinetics after intercritical deformation in 0.19wt% C1.5wt% Mn steel

    Smith, A., Miroux, AG., Luo, H., Sietsma, J. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 329-334 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Neutron depolarisation study of the austenite grain size in TRIP steels

    van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2004, In : Physica B: Condensed Matter. 350, p. e463-e466

    Research output: Contribution to journalArticleScientificpeer-review

  42. Novel liquid crystal thermoset resins for cryogenic fuel tank applications

    Dingemans, TJ., van der Zwaag, S., Knijnenberg, A., Weiser, E. S. & Jensen, B. J., 2004, 24th International Congress of the Aeronautical Sciences. Japan, p. 01-04 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  43. Observing individual grains during the evolution of the microstructure of steel

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  44. On the bond strength of aluminium foams bonded to sold aluminium

    Nieuwkoop, P., van der Zwaag, S. & Rizam A Majid, M. S., 2004, Society for the Advanced Material and Process Engineer. Green, J. E. (ed.). Madison: SAMPE, p. 1-15 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  45. On the bond strength of aluminium foams bonded to solid aluminium

    Nieuwkoop, P., van der Zwaag, S. & Rizam Majid, M. S., 2004, In : SAMPE Journal. p. 1-15 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Phase transformations in steel observed by the 3D-XRD microscope at ESRF

    Sietsma, J., Kruijver, SO., Offerman, SE., van Dijk, NH., Zhao, L. & van der Zwaag, S., 2004.

    Research output: Contribution to conferencePosterProfessional

  47. Physical simulation of thermally induced martensite formation from retained austenite in TRIP steels

    Zhao, L., Vermolen, FJ., Sietsma, J. & van der Zwaag, S., 2004, Proceedings of the 4th International Conference on Physical and Numerical Simulation of Materials Processing.. Zhuanqi, H. (ed.). Shanghai: Journal of Materials Science and Technology, p. 105-108 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  48. Predicting the Effect of Alloy Composition on the Intermetallic Phase Transformation Kinetics in 6XXX Extrusion Alloys

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, Conference Proceedings of the 9th International Aluminum Alloys Conference. Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: s.n., p. 1040-1045 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  49. Predicting the effect of alloy composition on the intermetallic phase transformation kinetics in 6XXX extrusion alloys.

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2004, In : Materials Forum. 28, p. 1040-1045 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Property Optimisation in Fibre Metal Laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2004, In : Applied Composite Materials: an international journal for the science and application of composite materials. 11, p. 63-76 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Quantifying anisotropic solute transport in protein crystals using 3-D laser scanning confocal microscopy visualization

    Cvetkovic, A., Straathof, AJJ., van der Wielen, LAM., van der Zwaag, S., Krishna, R. & Hanlon, DN., 2004, In : Biotechnology and Bioengineering. 86, 4, p. 389-398 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Recovery Processes in the Ferrite Phase in C-Mn Steel

    Smith, A., Luo, H., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2004, In : ISIJ International. 44, 7, p. 1188-1194 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Recovery and recrystallisation of C-Mn steels in the intercritical region

    Luo, H., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2004, Proceedings of the 4th International Conference on Physical and Numerical Simulation of Materials Processing. Zhuangqi, H. (ed.). Shanghai: Journal of Materials Science and Technology, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  54. Recrystallisation Texture of Cold Rolled and Annealed IF Steel Produced from Ferritic Rolled Hot Strip

    Elsner, A., Kaspar, R., Ponge, D., Raabe, D. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 257-262 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Recrystallisation and concurrent precipitation in hot rolled AA 3103

    Miroux, AG., Lok, ZJ. & van der Zwaag, S., 2004, In : Materials Science Forum. 467-470, p. 393-398 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Recrystallisation and the rate of Mn precipitation in AA3103

    Lok, ZJ., Miroux, AG. & van der Zwaag, S., 2004, Proceedings of the 9th International Conference on Aluminium Alloys.. Morton Nie, JF., Muddel, BC., Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: Institute of Materials Engineering, p. 1073-1079 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  57. Reply to the discussion by Aaronson et al. to "Grain nucleation and growth during phase transformations" by S.E. Offerman et al., Science, 298, 1003 (Nov. 1, 2002)

    Offerman, SE., van Dijk, NH., Sietsma, J., van der Zwaag, S., Lauridsen, EM., Margulies, L., Grigull, S. & Poulsen, HF., 2004, In : Scripta Materialia. 51, p. 937-941 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Simulation of Concurrent Precipitation Effect on Recrystallisation

    Miroux, AG., Anselmino, E. & van der Zwaag, S., 2004, Proceedings of the 9th International Conference on Aluminum Alloys.. Nie, JF., Morton, AJ. & Muddle, BC. (eds.). Brisbane: The Institute of Materials Engineering., p. 1104-1109 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  59. Size distributions and volume fractions of dispersoids in hot and cold processed AA3103

    Anselmino, E., Miroux, AG. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, June, p. 680-685 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Solid-state phase transformations involving solute partitioning: modeling and measuring on the level of individual grains

    Offerman, SE., van Dijk, NH., Sietsma, J., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2004, In : Acta Materialia. 52, p. 4757-4766 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Solute level determination in AA1200 and AA3103

    Lok, ZJ., Löchte, L. & van der Zwaag, S., 2004, In : Aluminium: vakblad over aluminium en aluminiumlegeringen. 80, p. 647-653 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Stress reduction in a-C:H coatings through the addition of nitrogen to the feed gas

    Rabbani, F., Escobar Galindo, R., Arnoldbik, WM., van der Zwaag, S., van Veen, A. & Schut, H., 2004, In : Diamond and Related Materials. 13, p. 1645-1657 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. 2003
  64. A model of the beta-AlFeSi to alpha-Al(FeMn)Si transformation in Al-Mg-Si alloys

    Kuijpers, NCW., Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Transactions. 44, 7, p. 1448-1456 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. A physics-based transformation model for low-carbon steels: from first principles to on-line application

    van Leeuwen, Y., Luinenburg, A. W., Onink, M., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientific

  66. A study on the beta' and beta" formation kinetics in AA6063 using differential scanning calorimetry

    van de Langkruis, J., Vossenberg, MS., Kool, WH. & van der Zwaag, S., 2003, In : Journal of Materials Engineering and Performance. vol. 12, No. 4, p. 408-413 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Acoustic-emission investigations on the austenite decomposition in a medium-carbon steel.

    Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2003, Tranformation and Deformation Mechanisms in Advanced High-Strength Steels.. Militzer, M., Essadiqu, E. & Poole, W. J. (eds.). Vancouver, Canada: COM 2003, p. 109-124 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  68. Advanced models for particle dissolution in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, Euromat 2003. p. 142-145 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  69. Analysis of the y - a transformation in a C-Mn steel by dilatometry, laser scanning confocal microscopy and phase field modelling

    Mecozzi, MG., Sietsma, J., van der Zwaag, S., Apel, M., Schaffnit, P. & Steinbach, I., 2003, EPD 2003 conference in Chicago. Damm, E. B. & Merwin, M. J. (eds.). Chicago, USA: EPD, p. 353-366 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  70. Assessment of different techniques for quantification of alpha-Al(FeMn) and beta-AlFeSi intermetallics in AA 6xxx alloys.

    Kuijpers, NCW., Kool, WH., Koenis, PTG., Nilsen, K. E., Todd, I. & van der Zwaag, S., 2003, In : Materials Characterization. 49, p. 409-420 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite Formation and Decomposition. Damm, EB. & Merwin, M. (eds.). Warrendale, USA: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  72. Austenite decomposition: modelling and measuring at the level of individual grains

    van der Zwaag, S., Sietsma, J., Offerman, SE. & van Dijk, NH., 2003, Austenite and Decomposition. Damm, EB. & Merwin, EB. (eds.). Warrendale: The Minerals, Metals & Materials Society (TMS), p. 267-278 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  73. Cluster formation of pearlite colonies during the austenite/pearlite phase transformation in eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, In : Physica B: Condensed Matter. 335, p. 99-103 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Dispersoid characterisation during hot processing of AA3103.

    Anselmino, E., Miroux, A. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  75. Dispersoid evolution during hot working of AA3103.

    Anselmino, E., Lok, ZJ., Hamerton, R. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  76. Effect of Intercritical deformation on bainite formation in Al-containing TRIP steel

    Luo, H., Zhao, L., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, 8, p. 1219-1227 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Effect of microsegregation and dislocations on the nucleation kinetics of precipitation in aluminium alloy

    Chen, SP., Kuijpers, NCW. & van der Zwaag, S., 2003, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A341, p. 296-306 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Evolving microstructure in pearlitic steel studied by neutron depolarisation

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 56-57 88 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  79. Grain Nucleation and Growth during Phase transformations

    Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2003, ESRF Highlights. Cornuéjols, D. & Admans, G. (eds.). Grenoble: ESRF, p. 66-67 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  80. High temperature SANS experiments on Nb(C,N) and Mn5 precipitates in HSLA steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2003, The Orange Book: Dutch neutron and muon science 2000-2003. Kearley, GJ., Bouwman, WG., van Well, AA., Visser, D. & Ramzi, A. (eds.). Den Haag: NWO, p. 58-59 88 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  81. High-temperature magnetisation measurements on the pearlite transformation kinetics in nearly eutectoid steel

    van Dijk, NH., Offerman, SE., Klaasse, JCP., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Magnetism and Magnetic Materials. 268, p. 40-48 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Hot deformation stimulated Mn depletion in AA3103.

    Lok, ZJ., Anselmino, E., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  83. In situ observations of the austenite to ferrite transformation

    van der Zwaag, S., Sietsma, J., Onink, M. & te Velthuis, SGE., 2003, Int. Conf Thermomechanical Processing. E.J. Palmiere, M. Mahfouf & C. Pinna (eds.). Sheffield, p. 193-196 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  84. In situ observations on the mechanical stability of austenite in TRIP steel

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003, In : The European Physical Journal. Special Topics. 104, p. 499-502 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. In-situ study of pearlite nucleation and growth during isothermal austenite decomposition in nearly eutectoid steel

    Offerman, SE., van Wilderen, LJGW., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 2003, In : Acta Materialia. 51, p. 3927-3938 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Isolating the effect of the dislocation substructure on the austenite to ferrite transformation kinetics in C-Mn steel following hot plastic deformation

    Hanlon, DN., Davenport, SB., Hunt, RD. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 176-183 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  87. Material characterisation and optimisation of fibre metal laminates

    van Rooijen, RGJ., Sinke, J., de Vries, TJ. & van der Zwaag, S., 2003, Computational Methods in Materials Characterisation. Series: High Performance Structures and Materials. Mammoli, A. A. & Brebbia, C. A. (eds.). Southampton: WIT Press, p. 55-64 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  88. Microchemistry effects during recrystallization of aluminium alloys.

    Miroux, A., Lok, ZJ., Anselmino, E., Chen, C. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  89. Micromechanical damage simulations of TRIP steels

    Papaefthymiou, S., Bleck, W., Prahl, U., Acht, C., Sietsma, J. & van der Zwaag, S., 2003, In : Materials Science Forum. 426-432, p. 1355-1360 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Modelling work-hardening of intercritically deformed low-carbon steels using a physical, a statistical, a hybrid and a finite element approach

    Bodin, A., Butler, SA., Burghardt, A., Sietsma, J. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 138-145 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  91. Neutron depolarisation study on the austenite grain size in TRIP steels.

    van Dijk, NH., Zhao, L., Rekveldt, MT., Fredrikze, H., Tegus, O., Brück, E., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  92. On subsurface crack growth in fibre metal laminate materials

    Randell, CE. & van der Zwaag, S., 2003, Materials and Processing: Enabling Flight, our legacy and our future. Schmitt, G. E. (ed.). Covina, USA: SAMPE, p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  93. On the precipitation and recrystallization behavior in an AA3003 following hot deformation

    Chen, SP., Lok, ZJ. & van der Zwaag, S., 2003, Int. Conf. Thermomechanical Processing: Mechanics, Microstructure & Control. Palmiere, Mahfouf & Pinna (eds.). Sheffield, p. 281-288 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  94. Particle dissolution and cross-diffusion in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2003, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A347, p. 265-279 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Physical Simulation of Thermally Induced Martensite Formation from Retained Austenite in TRIP steels

    Zhao, L., Vermolen, FJ., Sietsma, J. & van der Zwaag, S., 2003, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 19, suppl 1, p. 105-108 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Quantification of dispersoids in hot and cold processed AA3103.

    Anselmino, E., Miroux, A. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  97. Quantification of the evolution of the 3D intermetallic structure in a 6005A aluminium alloy during a homogenisation treatment

    Kuijpers, NCW., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2003, In : Materials Characterization. 48, p. 379-392 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Softening kinetics of deformed C-Mn steel in the intercritical region.

    Luo, H., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  99. Tailoring austenite stability in TRIP Steels.

    Butt, A., Zhao, L., van Dijk, NH. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  100. Tailoring austenite stability in TRIP-steels.

    Butt, AM., Zhao, L., van Dijk, NH., Sietsma, J. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  101. The influence of carbon diffusion on the character of the gamma-alpha phase transformation in steel

    van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2003, In : ISIJ International. 43, No. 5, p. 767-773 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. The mechanical stability of austenite in TRIP steel observed by 3D X-ray microdiffraction

    Kruijver, SO., Zhao, L., Sietsma, J., Lauridsen, EM., Poulsen, HF., Offerman, SE., van Dijk, NH., Margulies, L., Grigull, S. & van der Zwaag, S., 2003, Transformation and deformation mechanisms in advanced high-strength steels. Militzer, M., Poole, WJ. & Essadiqi (eds.). Vancouver, Canada: Metsoc, p. 223-234 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  103. The tensile stability of austenite in TRIP steel observed by 3D X-ray microdiffraction.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Jargulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  104. Thermal and mechanical stability of retained austenite in aluminium containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2003, In : ISIJ International. 42, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  105. Through process modeling of Mn precipitation in AA3103.

    Lok, ZJ., Miroux, A. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  106. Wholly Aromatic Main-chain nematic Thermosets for Composite Applications

    Dingemans, TJ. & van der Zwaag, S., 2003.

    Research output: Contribution to conferencePosterProfessional

  107. 2002
  108. A discussion on the atomic mechanism of the bainitic reaction in TRIP steels

    van der Zwaag, S. & Wang, J., 2002, In : Scripta Materialia. 47, p. 169-173 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  109. A mathematical model for the dissolution of stoichiometric particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 328, p. 14-25 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  110. A metallographic analysis of intercritically deformed C-Mn steel subjected to complex strain histories

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : ISIJ International. 42, 4

    Research output: Contribution to journalArticleScientificpeer-review

  111. A nano-indentation study on the mechanical behaviour of the matrix material in an AA6061-Al2O3 MMC.

    Mussert, KM., Vellinga, WP., Bakker, A. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 789-794 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  112. A quantification of the kinetic character of mixed-mode solid-state phase transformations.

    Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  113. A study of post plating heat treatment in automotive fastener steels.

    Lonyuk, B., Hop, R., Hanlon, DN., van der Zwaag, S., Zuidema, J. & Bakker, A., 2002, ECF 14, Fracture Mechanics beyond 2000, Vol. II, Proc. of the 14th Bienniel Conference on Fracture (ECF 14), Cracow, Poland, 8-13 September 2002.. Neimitz, A., Rokach, IV., Kocanda, D. & Golos, K. (eds.). Sheffield, UK: EMAS Publications, p. 373-380 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  114. Acoustic emission investigations on the ferrite and bainite formation in low-alloy steel during ultra-fast cooling.

    Mertens, AIM., van Bohemen, SMC., Hermans, MJM., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  115. Changes in Fe and Si solute levels during deformation of AA1200

    Lok, ZJ., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002, In : Materials Science Forum. 396-402, p. 457-462 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  116. Changes in Fe and Si solute levels during deformation of AA1200.

    Lok, ZJ., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  117. DSC study on Mg-Si phases in as cast AA6xxx.

    Kuijpers, NCW., Kool, WH. & van der Zwaag, S., 2002, The 8th International Conference on Aluminium Alloys.. Switzerland: Materials Science Forum, p. 396-402 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  118. Effect of intercritical deformation on the isothermal bainitic transformation in Al-containing TRIP steels.

    Luo, H., Zhao, L., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  119. Ferrite/pearlite band formation in hot rolled medium carbon steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Technology. 18, p. 297-303 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  120. Filiform corrosion imaged beneath protection layers on Al Alloys

    Szymanski, R., Jamieson, DN., Hughes, T., Mol, JMC., van der Zwaag, S. & Ryan, CG., 2002, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 190, 1-4, p. 365-369 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  121. Grain nucleation and growth during phase transformations

    Offerman, SE., van Dijk, NH., Sietsma, J., Grigull, S., Lauridsen, EM., Margulies, L., Poulsen, HF., Rekveldt, MT. & van der Zwaag, S., 2002, In : Science. 298, p. 1003-1005 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  122. HRTEM observations of a-Al(FeMn)Si nucleation on B-AlFeSi intermetallics in Al-Mg-Si alloys

    Kuijpers, NCW., Chen, JH., Jansen, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  123. HRTEM observations of alpha-Al(FeMn)Si nucleations on ß-AlFeSi intermetallics in Al-Mg-Si alloys.

    Kuijpers, NCW., Chen, JH., Jansen, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  124. High Temperature SANS Experiments on Nb(C,N) and MnS Precipitates in HSLA Steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S. & Heenan, RK., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, July 2002, p. 1883-1891 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  125. In situ observations on the austenite stability in TRIP-steel during tensile testing

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Margulies, L., Lauridsen, EM., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002, In : Steel Research International. 73, 6+7, p. 236-241 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  126. In situ observations on the austenite stability in TRIP-steel during tensile testing

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Margulies, L., Lauridsen, EM., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002, Fundamental Materials Science of the TRIP Phenomenon. BC De Cooman (ed.). Aachen-Mainz: Wissenschaftsverlag Mainz GmbH, p. 25-29 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  127. In-situ high-temperature X-ray diffraction on the g to a transformation in low-carbon steels

    Bodin, A., Woning, L., Sietsma, J. & van der Zwaag, S., 2002, In : ISIJ International. 42, p. 94-99 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  128. In-situ observation of the austenite to ferrite phase transformation in steels.

    van der Meij, R., Peekstok, ER., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  129. In-situ observations on the mechanical stability of austenite in TRIP steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  130. In-situ observations on the mechanical stability of austenite in TRIP-steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  131. In-situ observations on the mechanical stability of austenite in TRIP-steel.

    Kruijver, SO., Zhao, L., Sietsma, J., Offerman, SE., van Dijk, NH., Lauridsen, EM., Margulies, L., Grigull, S., Poulsen, HF. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  132. Influence of intercritical annealing temperature on the microstructure in a high aluminium TRIP steel

    Zhao, L., Moreno, JJ., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002, TRIP-aided ferrous alloys. BC De Cooman (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 141-146 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  133. Investigation of recovery and recrystallisation processes in C-Mn steel.

    Smith, A., Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  134. Magnetic determination of the thermal stability of retained austenite in TRIP steel

    Zhao, L., Tegus, O., Brück, E., van Dijk, NH., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002, Fundamental Materials Science of the TRIP Phenomenon. de Cooman, DC. (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 71-74 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  135. Magnetic determination of the thermal stability of retained austenite in TRIP steel.

    Zhao, L., Tegus, O., Brück, E., van Dijk, NH., Kruijver, SO., Sietsma, J. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  136. Microchemical and structural changes after hot working of AA3103

    Lok, ZJ., Anselmino, E., Flemming, A. J. E., Hamerton, R. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  137. Microstructure development and mechanical behaviour of Al-containing TRIP-steels

    Papaefthymiou, S., Bleck, W., Kruijver, SO., Zhao, L., Sietsma, J. & van der Zwaag, S., 2002, Automative Applications. BC De Cooman (ed.). Aachen: Wissenschaftsverlag Mainz GmbH, p. 341-345 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  138. Modeling the kinetics of grain boundary nucleated recrystallisation processes after cold deformation

    Chen, SP., Todd, I. & van der Zwaag, S., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, p. 529-539 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  139. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part I: Phase regions.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1199-1207 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  140. Modelling the continuous cooling transformation diagram of engineering steels using neural networks. Part II: Microstructure and hardness.

    van der Wolk, PJ., Wang, J., Sietsma, J. & van der Zwaag, S., 2002, In : Zeitschrift fuer Metallkunde. 93, p. 1208-1216 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  141. Neutron depolarization study of the austenite/pearlite phase transformation in steel

    van Wilderen, LJGW., Offerman, SE., van Dijk, NH. & van der Zwaag, S., 2002, In : Applied Physics A: materials science & processing. 74, Part 2 sup, p. s1052-s1054

    Research output: Contribution to journalArticleScientificpeer-review

  142. Neutron depolarization study on the autenite/pearlite phase transformation in steel

    van Wilderen, LJGW., Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S1052-S1054

    Research output: Contribution to journalArticleScientificpeer-review

  143. Quantification of the evolution of the 3D intemetallic structure in a 6005A aluminium alloy during a homogenisation treatment.

    Kuijpers, NCW., Tirel, J., Hanlon, DN. & van der Zwaag, S., 2002, In : Materials Characterization. 48, p. 379-392 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  144. Quantification of the recrystallization behaviour in Al-alloy AA1050

    Chen, SP., Hanlon, DN., van der Zwaag, S., Pei, YT. & Hosson, T., 2002, In : Journal of Materials Science. 37, p. 989-995 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  145. Quantitative dilatometric analysis of intercritical annealing in a low-silicon TRIP steel

    Zhao, L., Kop, TA., Rolin, V., Sietsma, J., Mertens, AIM., Jacques, PJ. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, p. 1585-1591 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  146. SANS experiments on Nb(C,N) and MnS precipitates in HSLA steel

    van Dijk, NH., Offerman, SE., Bouwman, WG., Rekveldt, MT., Sietsma, J., van der Zwaag, S., Bodin, A. & Heenan, RK., 2002, In : Applied Physics A: materials science & processing. 74, Part II, p. S978-S980

    Research output: Contribution to journalArticleScientificpeer-review

  147. Texture and microstructure development during intercritical rolling of low-carbon steels

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2002, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 33A, p. 1589-1603 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  148. The application of reversed torsion deformation to the study of the austenite to ferrite phase transformation in steels

    Davenport, SB., Hanlon, DN., Peekstok, ER. & van der Zwaag, S., 2002, In : Scripta Materialia. 46, p. 413-417 5 p.

    Research output: Contribution to journalArticleScientific

  149. The effect of mechanical surface patterning on filiform growth characteristics

    Mol, JMC., de Wit, JHW. & van der Zwaag, S., 2002, In : Journal of Materials Science. 37, 13, p. 2755-2761 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  150. The influence of nitrogen on the austenite/ferrite interface mobility in Fe-1at.%Si

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2002, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 323, p. 403-408 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  151. The role of dispersoids in thermo-mechanical processes of aluminium alloys.

    Anselmino, E. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  152. Thermal and mechanical stability of retained austenite in Al-containing TRIP steels

    Zhao, L., Kruijver, SO., van der Pers, NM., Sietsma, J., Tegus, O., Brück, E., van Dijk, NH. & van der Zwaag, S., 2002.

    Research output: Contribution to conferencePosterProfessional

  153. Thermal and mechanical stability of retained austenite in aluminium-containing multiphase TRIP steels

    van der Zwaag, S., Zhao, L., Kruijver, SO. & Sietsma, J., 2002, In : ISIJ International. 42, 12, p. 1565-1570 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  154. 2001
  155. A critical appraisal of fracture toughness measurements on AA6061 and an Al203-particle reinforced AA6061 alloy for various heat treatments

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  156. A critical appraisal of fracture toughness measurements on AA6061 and an Al2O3 particle reinforced AA6061 alloy for various heat treatments.

    van Gorp, A. C., Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Testing and Evaluation. 29, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  157. A mathematical model of the morphological changes in aluminium extrusion alloys during homogenization.

    van Til, W., Vuik, C. & van der Zwaag, S., 2001, Delft: Delft University of Technology. 33 p.

    Research output: Book/ReportReportProfessional

  158. A study of hydrogen embrittlement in automotive fastener steels.

    Lonyuk, B., Hop, R., Hanlon, DN., van der Zwaag, S., Zuidema, J. & Bakker, A., 2001, Advances in Fracture Research, Proceedings on CD-rom of 10th International Conference on Fracture.. Ravi-Chandar, K. (ed.). p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  159. A study on the fracture toughness of Al-based MMCs containing different volume fractions Al2O3.

    Duwel, AHC., Mussert, KM., Bakker, A. & van der Zwaag, S., 2001, In : Journal of Materials Science Letters. 20, p. 1147-1150 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  160. Advanced hot rolling practice and products for the production of hot rolled strips.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, . Joint ECSC-Steel NEST workshop advanced hot rolling practice and products.. Düsseldorf, Germany: VDeh, p. 1-3 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  161. Anisotropic dilatation behaviour during transformation of hot rolled steels showing banded structure.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Technology. 17, 12, p. 1569-1574 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  162. Computational modelling of free and Moving boundary problems.

    van Til, W., Vuik, C. & van der Zwaag, S., 2001, Sixth International Conference on the Computational Modelling of Free and Moving Boundary Problems, Moving Boundaries VI.. p. 123-132 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  163. Digitisation of Al AA1050 microstructures as precursor in Monte Carlo simulations of recrystalisation: proof of experimental concept.

    Peekstok, ER., Tirel, J., Chen, SP., Hanlon, DN. & van der Zwaag, S., 2001, Delft: Delft University of Technology. 9 p.

    Research output: Book/ReportReportProfessional

  164. Dilatometric analysis of phase transformations in hypo-eutectoid steels.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 36, p. 519-526 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  165. Domain size determination of granular ferromagnetic systems with neutron depolarization

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. vol 89, no, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  166. Domain size determination of granular ferromagnetic systems with neutron depolarization.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Applied Physics. 89, 2, p. 1275-1280 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  167. Effect of strain path in torsion on subsequent recrystallization behaviour of an AA1050 and AA3103 aluminium alloys.

    Valle, R., van der Zwaag, S. & Nes, E., 2001, 1st Joint International Conference on Recrystallization and Grain Growth.. Gottstein, G. & Molodov, DA. (eds.). Berlin: Springer, p. 1231-1236 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  168. Effects of nitriding on fatigue strength of quenched and tempered steel: role of interstitial nitrogen.

    Korevaar, BM., Coorens, S., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science & Technology: an international journal in the field of materials science. 17, p. 54-62 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  169. Flow stress prediction during intercritical deformation of a low-carbon steel with a rule of mixtures and Fe-simulations.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Scripta Metallurgica. 45, p. 875-882 8 p.

    Research output: Contribution to journalArticleScientific

  170. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  171. Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels.

    Zhao, L., van Dijk, NH., Brück, E., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 313, p. 145-152 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  172. Monitoring the precipitation reactions in a cold-rolled Al-Mn-Mg-Cu alloy using thermoelectric power and electrical resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2001, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 81, 8, p. 2059-2072 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  173. Moving boundaries in solid state aluminium alloys

    van Til, W., Vuik, C. & van der Zwaag, S., 2001, Proceedings. B Sarler & CA Brebbia (eds.). Southampton: WIT Press, p. 123-132 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  174. OIM study on recrystallization of a cold rolled aluminium sheet metal.

    Chen, SP. & van der Zwaag, S., 2001, EBSD session at NvVm annual meeting.. p. 40-41 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  175. On the nature of the bimodal grain size distribution after intercritical deformation of a carbon-manganese steel.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2001, In : Materials Characterization. 47, p. 1-7 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  176. On the relation between softening processes and the austenite to ferrite phase transformation in steel.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, Minerals and Materials Society.. p. 215-227 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  177. On the role of hydrogen in fracture of commercial fastener steels.

    Lonyuk, B., Hop, R., Hanlon, DN., van der Zwaag, S., Zuidema, J. & Bakker, A., 2001, Proceedings of the International Symposium "Contemporary problems of Mechanics of Materials: Physico-chemical aspects and diagnostics of materials properties.. p. 104-105 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  178. Recovery and recrystallisation kynetics in deformed AA1050 after simulated break down rolling.

    Chen, SP., Zuidwijk, T. & van der Zwaag, S., 2001, 1st Joint International Conference on Recrystallization and Grain Growth.. Gottstein, G. & Molodov, DA. (eds.). Springer, p. 821-830 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  179. Some mathematical aspects of particle dissolution and cross-diffusion in multi-component alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 2001, Delft: Delft University of Technology. 24 p.

    Research output: Book/ReportReportProfessional

  180. Some observations on the effect of austenitisation conditions on the transformation kinetics in an HSLA steel and related C-Mn steels.

    Kop, TA., Remijn, PGW., Svetchnikov, V., Sietsma, J. & van der Zwaag, S., 2001, In : Journal of Materials Science. 38, p. 1863-1871 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  181. Stabilization mechanisms of retained austenite in transformation-induced plasticity steel.

    Wang, J. & van der Zwaag, S., 2001, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 32A, p. 1527-1539 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  182. The application of laser scanning confocal microscopy to tribological research.

    Hanlon, DN., Todd, I., Peekstok, ER., Rainforth, WM. & van der Zwaag, S., 2001, In : Wear. 251, p. 1159-1168 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  183. The austenite to ferrite transformation kinetics of low carbon steels under ultra-fast cooling conditions.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, THERMEC 2000 ¿ Proceedings International Conference on Processing and Manufacturing of Advanced materials.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  184. The effect of beta, beta' and beta'' precipitates in a homogenised AA6063 alloy on the hot deformability and the peak hardness.

    van de Langkruis, J., Kool, WH., Sellars, CM., van der Winden, MR. & van der Zwaag, S., 2001, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 229, p. 105-115 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  185. The effect of plastic deformation of austenite on the kinetics of subsequent ferrite formation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1028-1036 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  186. The effects of alloy composition and surface treatment on the development of filiform corrosion on aluminium alloys.

    Mol, JMC., Duxbury, E., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2001, Proceedings of the 41st Annual Conference of the Australasian Corrosion Association 'Corrosion and Prevention-01'.. p. 1-10 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  187. The gamma-alpha transformation kinetics of low carbon steels under ultra-fast cooling condition.

    van Leeuwen, Y., Onink, M., Sietsma, J. & van der Zwaag, S., 2001, In : ISIJ International. 41, 9, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientific

  188. Theoretical study of P-containing transformation-induced plasticity steel. Part 1 - determination of the phosphorus concentration.

    Wang, J. & van der Zwaag, S., 2001, In : Zeitschrift fuer Metallkunde. 92, 12, p. 1299-1305 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  189. Theoretical study of P-containing transformation-induced plasticity steel. Part 2 - Analysis of the potential TRIP effect.

    Wang, J. & van der Zwaag, S., 2001, In : Zeitschrift fuer Metallkunde. 92, 12, p. 1306-1311 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  190. Transformation, microstructural and mechanical stabilization of metastable austenite in TRIP steels.

    Wang, J. & van der Zwaag, S., 2001, ECSC Steel & NEST workshop Advanced hot rolling practice and products for the production of hot rolled strips.. Düsseldorf, Germany.: VDeh, p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  191. 2000
  192. "werkwijze en inrichting voor het bewerken van een metalen mand, plak of plaat, en daarmee vervaardigd product"

    van der Winden, MR. & van der Zwaag, S., 2000, IPC No. Aangevraagd door Hoogovens Corporate Services BV, Afd. Industriele Eigendom., Patent No. 1014424, Priority date 1 Jan 1800

    Research output: Patent

  193. "werkwijze voor de vervaardiging van een vervormingsstaal met goede vervormingseigenschappen en vervormingsstaal van een laag-koolstof kwaliteit"

    van der Zwaag, S., Krusemeijer, G. & Vegter, H., 2000, IPC No. Aangevraagd door Hoogovens Corporate Services BV, Afd. Industriele Eigendom., Patent No. PCT/NL99/00182, Priority date 1 Jan 1800

    Research output: Patent

  194. 3D neutron depolarization experiments on the Austenite/ferrite phase transformation in steel

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 2000, 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  195. 3D neutron depolarization experiments on the gamma/alfa phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Physica B: Condensed Matter. 276-278, p. 868-869 2 p.

    Research output: Contribution to journalArticleScientificpeer-review

  196. A filiform corrosion and potentiodynamic polarisation study of some aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, 7, p. 1629-1639 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  197. A flow stress model for the intercritical deformation of low-carbon steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, Modelling of metal rolling processes 3.. IOM communications, p. 268-279 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  198. A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys.

    Wits, JJ., Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 283, p. 234-241 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  199. A study on the effect of plastic deformation on the austenite-to-ferrite phase transformation.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proceedings (2nd version) of J.J. Jonas Symposium on thermomechanical processing of steel.. p. 735-750 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  200. A three-dimensional model for the development of the microstructure in steel during slow cooling

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 2000, 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  201. A three-dimensional model for the development of the microstructure in steel during slow cooling.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 277, p. 218-228 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  202. An inventory of numerical methods to model solid-state phase transformations in aluminium alloys: a literature review

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, Delft: Netherlands Institute for Metals Research. 42 p.

    Research output: Book/ReportReportScientific

  203. An investigation of the kinetics of the austenite to ferrite transformation from deformed austenite.

    Hanlon, DN., Sietsma, J. & van der Zwaag, S., 2000, Proc. Third International Conference on Modelling of Metal Rolling Processes.. London: Institute of Metals, p. 431-440 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  204. Aspect ratio of bainite in steels.

    Wang, J., van der Zwaag, S., Yang, Z. & Fang, HS., 2000, In : Materials Letters. 45, p. 228-234 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  205. Comparion of experimental AA60663 extrusion trials to 3D numerical simulations, using a general solute-dependent constitutive model.

    van de Langkruis, J., Lof, J., Kool, WH., van der Zwaag, S. & Huétink, J., 2000, In : Computational Materials Science. 18, p. 381-392 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  206. Comparison of particle dissolution modules in AlStruc (Sintef) and Homog (TUDelft)

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, Delft: Netherlands Institute for Metals Research. 11 p.

    Research output: Book/ReportReportScientific

  207. Determination of martensite start temperature in engineering steels. Part I. Empirical relations describing the effect of steel chemistry.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 761-768 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  208. Determination of martensite start temperature in engineering steels. Part II. Correlation between critical driving force and Ms temperature.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Materials Transactions, JIM. 41, 7, p. 769-776 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  209. Determination of static softening after hot deformation by double hit compression experiments.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, THERMEC 2000 ¿ Proceedings International Conference on Processing and Manufacturing of Advanced materials.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  210. Effect of bainite reaction on austenite retention in Al containg TRIP steel.

    Wang, J. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 21 p.

    Research output: Book/ReportReportProfessional

  211. Effect of complex strain paths on hot deformation of aluminium alloys.

    Davenport, SB. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Jouffrey, B. & Svejcar, J. (eds.). p. 169-174 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  212. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 2000, 48, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  213. Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels.

    te Velthuis, SGE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 2000, In : Acta Materialia. 48, 5, p. 1105-1114 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  214. Influence of alloying elements and their interactions on the martensite start temperature.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, Microstructures, mechanical properties and processes - computer simulation and modelling.. Bréchet, Y. (ed.). Weinheim, Germany.: Wiley-VCH, p. 64-69 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  215. Linking plane strain compression tests on AA6063 to laboratory scale extrusion via constitutive equations.

    van de Langkruis, J., Bergwerf, R., van der Zwaag, S. & Kool, WH., 2000, Proc. Conf. on Aluminum Alloys: Their Physical and Mechanical Properties.. p. 565-570 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  216. Microstructure and texture development during and after intercritical rolling of LC-steels.

    Bodin, A., Sietsma, J. & van der Zwaag, S., 2000, 41st Mechanical working and steel processing conference proceedings.. Iron & Steel Society, p. 923-934 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  217. Modelling Mg2Si dissolution in an AA6063 alloy during preheating to the extrusion temperature.

    van de Langkruis, J., Kuijpers, NCW., Kool, WH., Vermolen, FJ. & van der Zwaag, S., 2000, Seventh International Aluminum Extrusion Technology Seminar & Exposition ET 2000.. p. 119-124 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  218. Modelling the austenite to ferrite phase transformation in low carbon steels in terms of the interface mobility.

    Kop, TA., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : ISIJ International. 40, 7, p. 713-718 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  219. Monitoring precipitation kinetics in an Al-Mn-Mg-Cu alloy using thermoelectric powder and electrical resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Brechet, Y. (ed.). p. 90-95 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  220. Monitoring the precipitation reactions in a cold rolled Al-Mn-Mg-Cu alloy using thermoelectric power and resistivity measurements.

    Vooijs, S., Davenport, B., Todd, I. & van der Zwaag, S., 2000, Proc. Conf. ICAA-7.. Starke Jr., EA., Sander Jr., TH. & Cassada, WA. (eds.). p. 933-938 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  221. On the influence of alloying elements on the bainite reaction in low alloy steels during continuous cooling.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 2000, In : Journal of Materials Science. 35, p. 4393-4404 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  222. On the mobility of the austenite-ferrite interface in Fe-Co and Fe-Cuu.

    Vooijs, S., van Leeuwen, Y., Sietsma, J. & van der Zwaag, S., 2000, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 31, p. 379-385 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  223. Phase transformations and microstructural evolution in aluminium-containing TRIP steels.

    Zhao, L., Sietsma, J. & van der Zwaag, S., 2000, Steels and materials for power plants.. Neumann et al., P. (ed.). Weinheim: Wiley-VCH, p. 77-82 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  224. Significance of deformation mode in hot deformation.

    Davenport, SB., Todd, I. & van der Zwaag, S., 2000, Proc. conf. ICAA-7.. Starke, EA., Sander, TH. & Cassada, WA. (eds.). p. 443-448 6 p. (Materials Science Forum; vol. 331-337).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  225. The effect of a thermal treatment on the fracture toughness K1c of an Aluminium AA6061-Al2O3 metal matrix composite material.

    van der Zwaag, S., Mussert, KM., van Gorp, A. C., Duwel, AHC. & Bakker, A., 2000, Proc. Conf. ATTT-AWT Tagung Gefüge und daraus resultierende Bauteileigenschaften.. p. 111-115 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  226. The effect of a thermal treatment on the fracture toughness K1c of an aluminium AA6061-AI2O3 metal matrix composite material

    van der Zwaag, S., van Gorp, A. C., Mussert, KM., Duwal, A. & Bakker, A., 2000, Gefüge und daraus resultierende Bauteileigenschaften. Berichtsband der Deutsch-Französischen ATTT-AWT-Tagung vom 13./14. 4 2000 in Aachen. Bremen: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik, p. 111-115 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  227. The effect of grain geometry on the kinetics of recrystallisation processes.

    Chen, SP., van Leeuwen, Y., Davenport, SB., Hanlon, DN. & van der Zwaag, S., 2000, Proc. Conf. Euromat 1999.. Brechet, Y. (ed.). p. 96-101 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  228. The modelling of the hardness of martensite after quenching using a neural network.

    van der Wolk, PJ. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 8 p.

    Research output: Book/ReportReportProfessional

  229. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    Kop, TA., Sietsma, J. & van der Zwaag, S., 2000, Delft: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  230. Wiskundige modellering van microsturcturele veranderingen tijdens het homogeniseren van aluminium

    van Til, W., Vuik, C. & van der Zwaag, S., 2000, STW-2000 04 26-01. S.l.: s.n., p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionProfessional

  231. 1999
  232. 3D Neutron depolarization experiments on the gamma/alpha phase transformation in steel.

    Offerman, SE., van Dijk, NH., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, ECNS99 Conference.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  233. A microstructural model for predicting hardness profiles of Fe-Cr alloys after nitriding.

    Braam, JJ. & van der Zwaag, S., 1999, In : Philosophical Magazine A: Physics of Condensed Matter. Defects and Mechanical Properties. 79, 5, p. 1193-1206 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  234. An asymptotic solution for the dissolution of particles in multi-component alloys

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, PCC'99: workshop. Warsaw: PAN, p. 155-159 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  235. An asymptotic solution for the dissolution of particles in multi-component alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1999, Workshop on phase change with convection modelling and validation.. Kowalewski, TA., Stella, F., Banaszek, J. & Szmyd, JS. (eds.). Polskiej Akademii Nauk, Warsaw.: Publisher Instytut Podstawowych Problemow Techniki, p. 155-159 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  236. Assessment of constitutive equations in modelling the hot deformability of some overaged AlMgSi alloys with varying solute contents.

    van de Langkruis, J., Kool, WH. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. A266, p. 135-145 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  237. Bainite transformation of low carbon Mn-Si TRIP-assisted multiphase steels: influence of silicon content on cementite precipitation and ausenite retention.

    Jacques, P., Girault, E., Catlin, T., Geerlofs, N., Kop, TA., van der Zwaag, S. & Delannay, F., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 273-275, p. 475-479 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  238. Bestudering van de kinetiek van nucleatie- en groeiprocessen tijdens diffusionele transformaties in staal met behulp van neutronendepolarisatie.

    van Dijk, NH., Rekveldt, MT., Sietsma, J., te Velthuis, SGE. & van der Zwaag, S., 1999, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  239. Dissolution of beta particles in an Al-Mg-Si alloy during DSC runs.

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  240. Dissolution of ß particles in an Al-Mg-Si alloy during DSC runs

    Chen, SP., Vossenberg, MS., Vermolen, FJ., van de Langkruis, J. & van der Zwaag, S., 1999, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 272, p. 250-256 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  241. Effects of carbon concentration and cooling rate on continuous cooling transformations predicted by artificial neural network.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, In : Tetsu to Hagane. 39, 10, p. 1037-1046 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  242. Ferrite growth from austenite in C-Mn steels during continuous cooling.

    Qui, C., Sietsma, J. & van der Zwaag, S., 1999, In : Ironmaking & Steelmaking: processes, products and applications. 26, 3, p. 200-204 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  243. Filiform corrosion of aluminium alloys. Publication in form of a video (8min): Introduction Filiform Corrosion and Project Overview.

    Mol, JMC., Heuvelman, N., Hinton, BRW., de Wit, JHW. & van der Zwaag, S., 1999

    Research output: Non-textual formDigital or Visual ProductsProfessional

  244. Filiforme corrosie op aluminium. Rapport naar aanleiding van een brainstormsessie op 17 juni 1999.

    Huisert, MHM., Mol, JMC., de Wit, JHW., van der Zwaag, S., van der Hoeven, J., van der Meer, W., van der Weijde, DH., van Westing, EPM., Meijers, SD. & Spoelstra, MB., 1999, Delft: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  245. Heat Treatment Science and Technology.

    van der Zwaag, S., 1999, Annual Report 1998 MIDEG.. p. 77-96 20 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterProfessional

  246. Micromechanics for macroscopic lifetime optimisation, Annual report 1998.

    van der Zwaag, S., 1999, Delft: Delft University of Technology. 11 p.

    Research output: Book/ReportReportProfessional

  247. Neutron depolarisation study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  248. Neutron depolarization study of phase transformations in steel.

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1999, In : Physica B: Condensed Matter. 267-268, p. 88-91 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  249. Phase transformations in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, Y., Kop, TA., Sietsma, J. & van der Zwaag, S., 1999, In : The European Physical Journal. Special Topics. 9, p. 401-409 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  250. Secrets of steel revealed by neutrons.

    Schrauwers, A., te Velthuis, SGE., van Dijk, NH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1999, In : Delft Outlook. 1, p. 8-12 5 p.

    Research output: Contribution to journalArticleProfessional

  251. The effect of the composition on the bainite transformation temperatures: a statistical analysis.

    Wang, J., van der Wolk, PJ. & van der Zwaag, S., 1999, ATTT-ATW-Tagung: Bainitische und martensitische Umwandlungen.. p. -

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  252. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 5 p.

    Research output: Book/ReportReportProfessional

  253. Verbeterde sturing en beheersing van de structuur en eigenschappen van staalplaat.

    van der Zwaag, S., Sietsma, J. & Kop, TA., 1999, Delft: Delft University of Technology. 7 p.

    Research output: Book/ReportReportProfessional

  254. 1998
  255. 24 Months Progress Report. Periode 1-12-1997 t/m 31-5-1998.

    Schlögl, SM., van Leeuwen, Y., van der Giessen, E. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 10 p.

    Research output: Book/ReportReportProfessional

  256. A filiform corrosion and potentio-dynamic polarisation study of aluminium alloys.

    Mol, JMC., Hinton, BRW., van der Weijde, DH., de Wit, JHW. & van der Zwaag, S., 1998, Proceedings of EUROCORR '98.. van der Weijde, DH. & de Wit, JHW. (eds.). p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  257. A mathematical model for the dissolution kinetics of Mg2Si-phases in Al-Mg-Si alloys during homogenisation under industrial conditions.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 254, p. 13-32 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  258. A statistical evaluation of the staircase and the ArcSin SQRT(P) method for determining the fatigue limit.

    Braam, JJ. & van der Zwaag, S., 1998, In : Journal of Testing and Evaluation. 26, 2, p. 125-131 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  259. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241-243, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  260. Ferrite nucleation and growth in a medium-carbon steel studied by neutron depolarization.

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998, In : Physica B: Condensed Matter. 241, p. 1234-1236 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  261. Ferrite nucleation and growth in steel studied with neutron depolarization

    te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  262. Filiform corrosie van gelakt aluminium: het effect van microstructurele variaties in het substraatoppervlak.

    Mol, JMC., van der Zwaag, S. & de Wit, JHW., 1998, Delft: Delft University of Technology. 9 p.

    Research output: Book/ReportReportProfessional

  263. Filiform corrosie van gelakt aluminium: het effect van microstructurele variaties in het substraatoppervlak. Zevende voortgangsrapportage.

    Mol, JMC., van der Zwaag, S. & de Wit, JHW., 1998, Delft: Delft University of Technology. 39 p.

    Research output: Book/ReportReportProfessional

  264. Improvement of hot rolled products by physical and mathematical modelling.

    Howe, A., Anelli, E., Bhadeshia, H., Garcia De Andres, C., Gutierrez, I., Hoogendoorn, T., Kaspar, R., Larburu, J. & van der Zwaag, S., 1998, THERMEC'97. International Conference on Thermomechanical Processing of Steels and other Materials1998.. p. 2015-2021 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  265. Intelligent processing in a hot rolling mill for structural steels.

    van der Wolk, PJ., Dorrepaal, C., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the RTA/AVT Panel workshop 1 on Intelligent Processing of High Performance Materials.. Brussels: AGARD, p. 6.1-6.6

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  266. Kinetics of gamma to alpha phase transformation in Fe-Mn alloys containing low manganese.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Technology. 14, 1, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  267. Modelling fracture in aluminium based metal matrix composites using a statistical approach.

    Mussert, KM., Janssen, M., Bakker, A. & van der Zwaag, S., 1998, ECF12 - Fracture from Defects.. Brown, MW., Rios, de los, ER. & Miller, KJ. (eds.). Cradley Heath, UK.: Emas Publishing, p. 1375-1380 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  268. Modelling of an industrial extrusion process.

    Coolegem, G., van der Wolk, PJ., Sietsma, J. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 63 p.

    Research output: Book/ReportReportScientific

  269. Modelling of the thermal expansion and compression of Mn.

    Qui, C. & van der Zwaag, S., 1998, In : Journal of Physics and Chemistry of Solids. 59, 2, p. 167-174 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  270. Modelling the CCT diagram of engineering steels using neural networks.

    van der Wolk, PJ., Dorrepaal, C. & van der Zwaag, S., 1998, Fourth International Conference on Engineering Applications of Neural Networks.. Bulsari, AB., Fernendez De Canete, J. & Kallio, S. (eds.). p. 609-612 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  271. Modelling the austenite decomposistion in steel on a physical basis.

    van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). Trans Tech Publications, p. 27-38 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  272. Modelling the microstructural changes during the homogenisation of extrudable aluminium alloys.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Journal of the Mechanical Behavior of Materials. 9, 2, p. 115-120 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  273. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  274. Neutron depolarization study of phase transformers in steel

    van Dijk, NH., te Velthuis, SGE., Rekveldt, MT., Sietsma, J. & van der Zwaag, S., 1998

    Research output: Other contributionProfessional

  275. Phase transformation in low-carbon steels; modelling the kinetics in terms of the interface mobility.

    van Leeuwen, J., Kop, TA., Sietsma, J. & van der Zwaag, S., 1998, EUROMECH-MECAMAT. 3rd European Mechanics Conference on Mechanics and Multi-Physics Processes in Solids.. Oxford, p. 372-380 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  276. Precipitation kinetics in Al6061 and in an Al6061-alumina particle composite.

    Chen, SP., Mussert, KM. & van der Zwaag, S., 1998, In : Journal of Materials Science. 33, p. 4477-4483 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  277. Simulations of pro-eutectoid ferrite formation using a mixed control growth model.

    Krielaart, GP. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, 1, p. 104-116 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  278. Some observations on cyclic deformation structures in the high-strength commercial aluminium alloy AA7150.

    Hanlon, DN., Rainforth, WM. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2727-2736 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  279. The dissolution of a stoichiometric second phase in ternary alloys: A numerical analysis.

    Vermolen, FJ., Vuik, C. & van der Zwaag, S., 1998, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 246, p. 93-103 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  280. The effect of geometrical assumptions in modeling solid-state transformation kinetics.

    van Leeuwen, Y., Vooijs, S., Sietsma, J. & van der Zwaag, S., 1998, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 29a, p. 2925-2931 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  281. The effect of metalworking fluids on the gas-nitriding behavour of 31CrMoV9 steel.

    Pennings, B. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1215-1217 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  282. The effect of the austenisation temperature on the transformation kinetics of an Nb-containing steel.

    Kop, TA., Remijn, PGW., Sietsma, J. & van der Zwaag, S., 1998, Proceedings of the International Conference on Microalloying in Steels "muAS".. Rodriguez-Ibabe, JM., Gutierrez, I. & Lopez, B. (eds.). San Sebastian, p. 193-200 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  283. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  284. The ferrite and austenite lattice parameters of Fe-Co and Fe-Cu binary alloys as a function of temperature.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, In : Acta Materialia. 46, 15, p. 5223-5228 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  285. The formability of spray-formed, high-chromium contenc, white cast iron.

    Hanlon, DN., Li, YH., Rainforth, WM., Sellars, CM. & van der Zwaag, S., 1998, In : Journal of Materials Science Letters. 17, p. 1637-1640 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  286. Volume changes in Fe-Cu and Fe-Co alloys during the austenite to ferrite phase transformatio.

    te Velthuis, SGE., Root, JH., Sietsma, J., Rekveldt, MT. & van der Zwaag, S., 1998, Delft: Delft University of Technology. 3 p.

    Research output: Book/ReportReportProfessional

  287. 1997
  288. Analytical approach to particle dissolution in a finite medium

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1997, In : Materials Science and Technology. 13, p. 308-312 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  289. 1996
  290. Microstructuur en kinetiek tijdens het partieel gloeien van twee commerciële niet-hardbare aluminiumlegeringen

    Sontgerath, JAH., van Mourik, P., van der Zwaag, S. & Korevaar, BM., 1996, In : Materialen. 1, p. 21-27 7 p.

    Research output: Contribution to journalArticleScientific

  291. 1995
  292. Deeltjes oplossen tijdens homogeniseren van aluminium-legeringen

    Vermolen, FJ., van Mourik, P. & van der Zwaag, S., 1995, In : Materialen. 1, p. 25-28 4 p.

    Research output: Contribution to journalArticleScientific

Previous 1 2 Next

ID: 142717