1. 2020
  2. Microstructure, precipitate and property evolution in cold-rolled Ti-V high strength low alloy steel

    Zhang, X., loannidou, C., ten Brink, G. H., Navarro-López, A., Wormann, J., Campaniello, J., Dalgliesh, R. M., van Well, A. A., Offerman, S. E., Kranendonk, W. & Kooi, B. J., 2020, In : Materials and Design. 192, 13 p., 108720.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Zinc Reduction/Vaporisation Behaviour from Metallurgical Wastes

    Kerry, T., Peters, A., Georgakopoulos, E., Hosseini, A., Offerman, E. & Yang, Y., 2020, PbZn 2020: 9th International Symposium on Lead and Zinc Processing. Siegmund, A., Alam, S., Grogan, J., Kerney, U. & Shibata, E. (eds.). Cham, Switzerland: Springer, p. 811-819 (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  4. 2019
  5. Characterization and feasibility studies on complete recovery of rare earths from glass polishing waste

    Borra, C. R., Vlugt, T. J. H., Spooren, J., Nielsen, P., Yang, Y. & Offerman, S. E., 2019, In : Metals. 9, 3, 11 p., 278.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Critical Materials: Underlying Causes and Sustainable Mitigation Strategies

    Offerman, E. (ed.), 2019, London, UK: World Scientific. 376 p. (World Scientific Series in Current Energy Issues; vol. 5)

    Research output: Book/ReportBook editingScientific

  7. General Introduction to Critical Materials

    Offerman, E., 2019, Critical Materials: Underlying Causes and Sustainable Mitigation Strategies. Offerman, E. (ed.). London, UK: World Scientific, p. 1-10 (World Scientific Series in Current Energy Issues; vol. 5).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  8. Interaction of precipitation with austenite-to-ferrite phase transformation in vanadium micro-alloyed steels

    Ioannidou, C., Arechabaleta Guenechea, Z., Navarro Lopez, A., Rijkenberg, A., Dalgliesh, R. M., Kölling, S., Bliznuk, V., Pappas, C., Sietsma, J., van Well, A. & Offerman, E., 2019, In : Acta Materialia. 181, p. 10-24

    Research output: Contribution to journalArticleScientificpeer-review

  9. Substitution Case Study: Replacing Niobium by Vanadium in Nano-Steels

    Arechabaleta Guenechea, Z. & Offerman, E., 2019, Critical Materials: Underlying Causes and Sustainable Mitigation Strategies. Offerman, E. (ed.). London, UK: World Scientific, p. 193-221 (World Scientific Series in Current Energy Issues; vol. 5).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  10. 2018
  11. Recovery of cerium from glass polishing waste: A critical review

    Borra, C. R., Vlugt, T. J. H., Yang, Y. & Offerman, S. E., 2018, In : Metals. 8, 10, 16 p., 801.

    Research output: Contribution to journalArticleScientificpeer-review

  12. VC-Precipitation Kinetics Studied by Small-Angle Neutron Scattering in Nano-Steels

    Ioannidou, C., Arechabaleta Guenechea, Z., Rijkenberg, A., Dalgliesh, R. M., van Well, A. & Offerman, E., 2018, In : Materials Science Forum. 941, p. 236-244

    Research output: Contribution to journalConference articleScientificpeer-review

  13. 2017
  14. A brief review on recovery of cerium from glass polishing waste

    Borra, C., Vlugt, T., Yang, Y. & Offerman, E., 2017, Proceedings of the 5th International Slag Valorisation Symposium. Leuven, Belgium, p. 495-498

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  15. Characterisation of glass polishing waste samples

    Borra, C., Vlugt, T., Offerman, E. & Yang, Y., 2017. 1 p.

    Research output: Contribution to conferencePosterScientific

  16. 2016
  17. A comparison between ultra-high-strength and conventional high-strength fastener steels: Mechanical properties at elevated temperature and microstructural mechanisms

    Ohlund, C., Lukovic, M., Weidow, J., Thuvander, M. & Offerman, E., 2016, In : ISIJ International. 56, 10, p. 1874–1883

    Research output: Contribution to journalArticleScientificpeer-review

  18. Preferential nucleation during polymorphic transformations

    Sharma, H., Sietsma, J. & Offerman, E., 2016, In : Scientific Reports. 6, p. 1-7 30860 .

    Research output: Contribution to journalArticleScientificpeer-review

  19. 2015
  20. Modelling the evolution of multiple hardening mechanisms during tempering of Fe-C-Mn-Ti martensite

    Ohlund, CEIC., den Ouden, D., Weidow, J., Thuvander, M. & Offerman, SE., 2015, In : ISIJ International. 55, 4, p. 884-893 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. 2014
  22. Effect of Ti on evolution of microstructure and hardness of martensitic Fe-C-Mn steel during tempering.

    Ohlund, CEIC., Weidow, J., Thuvander, M. & Offerman, SE., 2014, In : ISIJ International. 54, 12, p. 2890-2899 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. In-situ observation of changing crystal orientations during austenite grain coarsening.

    Sharma, H., Huizenga, RM., Bytchkov, A., Sietsma, J. & Offerman, SE., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, JJ. (eds.). Heidelberg, Germany: Springer, p. 109-129 259 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  24. In-situ synchrotron difraction studies on the formation, decomposition and stabiisation of austenite in TRIP steels during simulated weld thermal cycles.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Heidelberg, Germany: Springer, p. 71-88

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  25. The interaction of precipitation and deformation in a binary Mg-Ca alloy at elevated temperatures

    Lalpoor, M., Miroux, A., Mendis, CL., Hort, N. & Offerman, SE., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing (online). 609, p. 116-124 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. 2013
  27. Effect of niobium and grain boundary density on the fire resistance of Fe-C-Mn steel.

    Dere, EG., Sharma, H., Petrov, RH., Sietsma, J. & Offerman, SE., 2013, In : Scripta Materialia. 68, p. 651-654 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Formation of (Fe,Cr) carbides and dislocation structures in low-chromium steel studied in situ using synchrotron radiation.

    Dere, EG., Sharma, H., Huizenga, RM., Portale, G., Bras, W., Bliznuk, V., Sietsma, J. & Offerman, SE., 2013, In : Journal of Applied Crystallography. 46, p. 181-192 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Nucleation mechanism of Mg17Al12-precipitates in binary Mg-7 wt.% Al alloy.

    Lal Poor, M., Dzwonczyk, JS., Hort, N. & Offerman, SE., 2013, In : Journal of Alloys and Compounds. 557, p. 73-76 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Phase retrieval in in-line x-ray phase contrast imaging based on total variation minimization.

    Kostenko, A., Batenburg, KJ., Suhonen, H., Offerman, SE. & Vliet, L. J., 2013, In : Optics Express. 21, 1, p. 710-723 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Poster: The effects of TiC and Ti in solid solution on the microstructure evolution and softening of martensitic, Fe-C-M steel.

    Ohlund, CEIC., Weidow, J., Thuvander, M. & Offerman, SE., 2013.

    Research output: Contribution to conferencePosterProfessional

  32. The kinetics of softening and microstructure evolution of martensite in Fe-C-Mn steel during tempering at 300°C.

    Emmy, C., Ohlund, CEIC., Schlangen, E. & Offerman, SE., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 560, January, p. 351-357 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. The kinetics of softening and microstructure evolution of martensite in Fe-C-Mn steel during tempering at 300ºC.

    Ohlund, CEIC., Schlangen, E. & Offerman, SE., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 560, p. 351-357 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Total variation minimization approach in in-line x-ray phase-contrast tomography.

    Kostenko, A., Batenburg, KJ., King, A., Offerman, SE. & Vliet, L. J., 2013, In : Optics Express. 21, 10, p. 12185-12196 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. 2012
  36. A fast methodology to determine characteristics of thousands of grains using 3DXRD. I. Overlapping diffraction peaks and parameters of the experimental setup.

    Sharma, H., Huizenga, RM. & Offerman, SE., 2012, In : Journal of Applied Crystallography. 45, p. 693-704 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. A fast methodology to determine characteristics of thousands of grains using 3DXRD. II: Volume, centre-of-mass position, crystallographic orientation and strain state of grains.

    Sharma, H., Huizenga, RM. & Offerman, SE., 2012, In : Journal of Applied Crystallography. 45, p. 705-718 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Following individual grains during solid-state phase transformations with 3DXRD microscopy.

    Offerman, SE. & Sharma, H., 2012, In : Comptes Rendus Physique. 13, p. 268-279 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. In-line X-ray phase-contrast tomography and diffraction-contrast tomography study of the ferrite-cementite microstructure in steel.

    Kostenko, A., Sharma, H., Dere, EG., King, A., Ludwig, W., van Oel, W., Offerman, SE., Stallinga, S. & van Vliet, LJ., 2012, X-ray Optics and Microanalysis: AIP Conference Proceedings 1437. s.n. (ed.). Melville, New York, USA: American Institute of Physics, p. 63-68 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  40. In-situ 3DXRD investigation on the effect of niobium on austenite to ferrite phase transformation kinetics.

    Dere, EG. & Offerman, SE., 2012, Delft, The Netherlands: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  41. In-situ synchrotron diffraction studies on the formation, stabilisation and decomposition of austenite in trip steels during simulated weld thermal cycles

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2012, Proceedings of the Visual-JW2012. s.n. (ed.). s.l.: s.n., p. 1-2 2 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  42. In-situ texture measurements by synchrotron radiation of trip steel during an austempering treatment

    Petrov, RH., Leon Garcia, O., Sharma, O., Lee, H., Offerman, SE. & Kestens, LAI., 2012, In : Materials Science Forum. 702-703, p. 511-514 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Observation of changing crystal orientations during grain coarsening.

    Sharma, H., Huizenga, RM., Bytchkov, A., Sietsma, J. & Offerman, SE., 2012, In : Acta Materialia. 60, p. 229-237 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Synchrotron diffraction analysis of retained austenite in welded transformation induced plasticity (TRIP) steels.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Richardson, IM. & Gundlach, C., 2012, In : Science and Technology of Welding and Joining . 17, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Three-dimensional morphology of cementite in steel studied by X-ray phase-contrast tomography.

    Kostenko, A., Sharma, H., Dere, EG., King, A., Ludwig, W., van Oel, W., Offerman, SE., Stallinga, S. & van Vliet, LJ., 2012, In : Scripta Materialia. 67, 3, p. 261-264 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. 2011
  47. Characterization of an x-ray phase contrast imaging system based on the miniature synchrotron MIRRORCLE-6X.

    van Heekeren, RJ., Kostenko, A., Hanashima, T., Yamada, H., Stallinga, S., Offerman, SE. & van Vliet, LJ., 2011, In : Medical Physics. 38, 9, p. 5136-5145 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Improving the fire resistance of steel: The effect of niobium and cooling rate.

    Dere, EG. & Offerman, SE., 2011, Delft, The Netherlands: Delft University of Technology. 13 p.

    Research output: Book/ReportReportProfessional

  49. Poster: In-line X-ray phase-contrast tomography and diffraction-contrast tomography study of the ferrite-cementite microstructure in steel.

    Kostenko, A., Sharma, H., Dere, EG., King, A., Ludwig, W., van Oel, W., Offerman, SE., Stallinga, S. & van Vliet, LJ., 2011.

    Research output: Contribution to conferencePosterProfessional

  50. The effect of NbC precipitates on the phase transformation kinetics in high-purity Fe-C-Mn-Nb alloys.

    Dere, EG., Sharma, H., Offerman, SE. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 499-504 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. 2010
  52. Austenite nucleation and growth observed on the level of individual grains by three-dimensional X-ray diffraction microscopy.

    Savran, VI., Offerman, SE. & Sietsma, J., 2010, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 41A, p. 583-591 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Grain nucleation and growth of individual austenite and ferrite grains studied by 3DXRD microscopy at the ESRF.

    Offerman, SE. & Sharma, H., 2010, In-situ Studies with Photons, Neutrons and Electrons Scattering. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Berlin: Springer, p. 41-75 35 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  54. In situ phase transformation studies on a transformation induced plasticity steel under simulated weld thermal cycles using synchrotron diffraction

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2010, In-situ Studies with Photons, Neutrons and Electrons. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, JA. (eds.). Berlin Heidelberg: Springer, p. 133-148 204 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  55. 2009
  56. Multipurpose furnace for in situ studies of polycrystalline materials using synchrotron radiation.

    Sharma, H., Wattjes, AC., Amirthalingam, M., Zuidwijk, T., Geerlofs, N. & Offerman, SE., 2009, In : Review of Scientific Instruments. 80, 12, p. 123301-1-123301-7

    Research output: Contribution to journalArticleScientificpeer-review

  57. Poster: Designing fire resistant steels using synchrotron radiation.

    Sharma, H., Huizenga, RM., Bytchkov, A. & Offerman, SE., 2009.

    Research output: Contribution to conferencePosterProfessional

  58. Poster: Designing fire resistant steels using synchrotron radiation.

    Sharma, H., Huizenga, RM., Bytchkov, A. & Offerman, SE., 2009.

    Research output: Contribution to conferencePosterProfessional

  59. Preventing the collapse of steel-reinforced buildings during fire by increasing the high temperature strength of construction steel.

    Offerman, SE., Sharma, H., Dere, EG. & Huizenga, RM., 2009, Delft, The Netherlands: Delft University of Technology. 33 p.

    Research output: Book/ReportReportProfessional

  60. The effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 5, p. 533-543 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 Next

ID: 166142