1. 2020
  2. Zinc Reduction/Vaporisation Behaviour from Metallurgical Wastes

    Kerry, T., Peters, A., Georgakopoulos, E., Hosseini, A., Offerman, E. & Yang, Y., 2020, PbZn 2020: 9th International Symposium on Lead and Zinc Processing. Siegmund, A., Alam, S., Grogan, J., Kerney, U. & Shibata, E. (eds.). Cham, Switzerland: Springer, p. 811-819 (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. 2019
  4. Characterization and feasibility studies on complete recovery of rare earths from glass polishing waste

    Borra, C. R., Vlugt, T. J. H., Spooren, J., Nielsen, P., Yang, Y. & Offerman, S. E., 2019, In : Metals. 9, 3, 11 p., 278.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Critical Materials: Underlying Causes and Sustainable Mitigation Strategies

    Offerman, E., 2019, London, UK: World Scientific. 350 p. (World Scientific Series in Current Energy Issues; vol. 5)

    Research output: Book/ReportBookScientific

  6. Interaction of precipitation with austenite-to-ferrite phase transformation in vanadium micro-alloyed steels

    Ioannidou, C., Arechabaleta Guenechea, Z., Navarro Lopez, A., Rijkenberg, A., Dalgliesh, R. M., Kölling, S., Bliznuk, V., Pappas, C., Sietsma, J., van Well, A. & Offerman, E., 2019, In : Acta Materialia. 181, p. 10-24

    Research output: Contribution to journalArticleScientificpeer-review

  7. 2018
  8. Recovery of cerium from glass polishing waste: A critical review

    Borra, C. R., Vlugt, T. J. H., Yang, Y. & Offerman, S. E., 2018, In : Metals. 8, 10, 16 p., 801.

    Research output: Contribution to journalArticleScientificpeer-review

  9. VC-Precipitation Kinetics Studied by Small-Angle Neutron Scattering in Nano-Steels

    Ioannidou, C., Arechabaleta Guenechea, Z., Rijkenberg, A., Dalgliesh, R. M., van Well, A. & Offerman, E., 2018, In : Materials Science Forum. 941, p. 236-244

    Research output: Contribution to journalConference articleScientificpeer-review

  10. 2017
  11. A brief review on recovery of cerium from glass polishing waste

    Borra, C., Vlugt, T., Yang, Y. & Offerman, E., 2017, Proceedings of the 5th International Slag Valorisation Symposium. Leuven, Belgium, p. 495-498

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Characterisation of glass polishing waste samples

    Borra, C., Vlugt, T., Offerman, E. & Yang, Y., 2017. 1 p.

    Research output: Contribution to conferencePosterScientific

  13. 2016
  14. A comparison between ultra-high-strength and conventional high-strength fastener steels: Mechanical properties at elevated temperature and microstructural mechanisms

    Ohlund, C., Lukovic, M., Weidow, J., Thuvander, M. & Offerman, E., 2016, In : ISIJ International. 56, 10, p. 1874–1883

    Research output: Contribution to journalArticleScientificpeer-review

  15. Preferential nucleation during polymorphic transformations

    Sharma, H., Sietsma, J. & Offerman, E., 2016, In : Scientific Reports. 6, p. 1-7 30860 .

    Research output: Contribution to journalArticleScientificpeer-review

  16. 2015
  17. Modelling the evolution of multiple hardening mechanisms during tempering of Fe-C-Mn-Ti martensite

    Ohlund, CEIC., den Ouden, D., Weidow, J., Thuvander, M. & Offerman, SE., 2015, In : ISIJ International. 55, 4, p. 884-893 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. 2014
  19. Effect of Ti on evolution of microstructure and hardness of martensitic Fe-C-Mn steel during tempering.

    Ohlund, CEIC., Weidow, J., Thuvander, M. & Offerman, SE., 2014, In : ISIJ International. 54, 12, p. 2890-2899 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. In-situ observation of changing crystal orientations during austenite grain coarsening.

    Sharma, H., Huizenga, RM., Bytchkov, A., Sietsma, J. & Offerman, SE., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, JJ. (eds.). Heidelberg, Germany: Springer, p. 109-129 259 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  21. In-situ synchrotron difraction studies on the formation, decomposition and stabiisation of austenite in TRIP steels during simulated weld thermal cycles.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2014, In-situ Studies with Photons, Neutrons and Electrons - Scattering II. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Heidelberg, Germany: Springer, p. 71-88

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  22. The interaction of precipitation and deformation in a binary Mg-Ca alloy at elevated temperatures

    Lalpoor, M., Miroux, A., Mendis, CL., Hort, N. & Offerman, SE., 2014, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing (online). 609, p. 116-124 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. 2013
  24. Effect of niobium and grain boundary density on the fire resistance of Fe-C-Mn steel.

    Dere, EG., Sharma, H., Petrov, RH., Sietsma, J. & Offerman, SE., 2013, In : Scripta Materialia. 68, p. 651-654 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Formation of (Fe,Cr) carbides and dislocation structures in low-chromium steel studied in situ using synchrotron radiation.

    Dere, EG., Sharma, H., Huizenga, RM., Portale, G., Bras, W., Bliznuk, V., Sietsma, J. & Offerman, SE., 2013, In : Journal of Applied Crystallography. 46, p. 181-192 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Nucleation mechanism of Mg17Al12-precipitates in binary Mg-7 wt.% Al alloy.

    Lal Poor, M., Dzwonczyk, JS., Hort, N. & Offerman, SE., 2013, In : Journal of Alloys and Compounds. 557, p. 73-76 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Phase retrieval in in-line x-ray phase contrast imaging based on total variation minimization.

    Kostenko, A., Batenburg, KJ., Suhonen, H., Offerman, SE. & Vliet, L. J., 2013, In : Optics Express. 21, 1, p. 710-723 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Poster: The effects of TiC and Ti in solid solution on the microstructure evolution and softening of martensitic, Fe-C-M steel.

    Ohlund, CEIC., Weidow, J., Thuvander, M. & Offerman, SE., 2013.

    Research output: Contribution to conferencePosterProfessional

  29. The kinetics of softening and microstructure evolution of martensite in Fe-C-Mn steel during tempering at 300°C.

    Emmy, C., Ohlund, CEIC., Schlangen, E. & Offerman, SE., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 560, January, p. 351-357 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. The kinetics of softening and microstructure evolution of martensite in Fe-C-Mn steel during tempering at 300ºC.

    Ohlund, CEIC., Schlangen, E. & Offerman, SE., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing. 560, p. 351-357 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Total variation minimization approach in in-line x-ray phase-contrast tomography.

    Kostenko, A., Batenburg, KJ., King, A., Offerman, SE. & Vliet, L. J., 2013, In : Optics Express. 21, 10, p. 12185-12196 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. 2012
  33. A fast methodology to determine characteristics of thousands of grains using 3DXRD. I. Overlapping diffraction peaks and parameters of the experimental setup.

    Sharma, H., Huizenga, RM. & Offerman, SE., 2012, In : Journal of Applied Crystallography. 45, p. 693-704 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. A fast methodology to determine characteristics of thousands of grains using 3DXRD. II: Volume, centre-of-mass position, crystallographic orientation and strain state of grains.

    Sharma, H., Huizenga, RM. & Offerman, SE., 2012, In : Journal of Applied Crystallography. 45, p. 705-718 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Following individual grains during solid-state phase transformations with 3DXRD microscopy.

    Offerman, SE. & Sharma, H., 2012, In : Comptes Rendus Physique. 13, p. 268-279 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. In-line X-ray phase-contrast tomography and diffraction-contrast tomography study of the ferrite-cementite microstructure in steel.

    Kostenko, A., Sharma, H., Dere, EG., King, A., Ludwig, W., van Oel, W., Offerman, SE., Stallinga, S. & van Vliet, LJ., 2012, X-ray Optics and Microanalysis: AIP Conference Proceedings 1437. s.n. (ed.). Melville, New York, USA: American Institute of Physics, p. 63-68 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. In-situ 3DXRD investigation on the effect of niobium on austenite to ferrite phase transformation kinetics.

    Dere, EG. & Offerman, SE., 2012, Delft, The Netherlands: Delft University of Technology. 12 p.

    Research output: Book/ReportReportProfessional

  38. In-situ synchrotron diffraction studies on the formation, stabilisation and decomposition of austenite in trip steels during simulated weld thermal cycles

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2012, Proceedings of the Visual-JW2012. s.n. (ed.). s.l.: s.n., p. 1-2 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. In-situ texture measurements by synchrotron radiation of trip steel during an austempering treatment

    Petrov, RH., Leon Garcia, O., Sharma, O., Lee, H., Offerman, SE. & Kestens, LAI., 2012, In : Materials Science Forum. 702-703, p. 511-514 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Observation of changing crystal orientations during grain coarsening.

    Sharma, H., Huizenga, RM., Bytchkov, A., Sietsma, J. & Offerman, SE., 2012, In : Acta Materialia. 60, p. 229-237 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Synchrotron diffraction analysis of retained austenite in welded transformation induced plasticity (TRIP) steels.

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Richardson, IM. & Gundlach, C., 2012, In : Science and Technology of Welding and Joining . 17, 2, p. 146-154 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Three-dimensional morphology of cementite in steel studied by X-ray phase-contrast tomography.

    Kostenko, A., Sharma, H., Dere, EG., King, A., Ludwig, W., van Oel, W., Offerman, SE., Stallinga, S. & van Vliet, LJ., 2012, In : Scripta Materialia. 67, 3, p. 261-264 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. 2011
  44. Characterization of an x-ray phase contrast imaging system based on the miniature synchrotron MIRRORCLE-6X.

    van Heekeren, RJ., Kostenko, A., Hanashima, T., Yamada, H., Stallinga, S., Offerman, SE. & van Vliet, LJ., 2011, In : Medical Physics. 38, 9, p. 5136-5145 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Improving the fire resistance of steel: The effect of niobium and cooling rate.

    Dere, EG. & Offerman, SE., 2011, Delft, The Netherlands: Delft University of Technology. 13 p.

    Research output: Book/ReportReportProfessional

  46. Poster: In-line X-ray phase-contrast tomography and diffraction-contrast tomography study of the ferrite-cementite microstructure in steel.

    Kostenko, A., Sharma, H., Dere, EG., King, A., Ludwig, W., van Oel, W., Offerman, SE., Stallinga, S. & van Vliet, LJ., 2011.

    Research output: Contribution to conferencePosterProfessional

  47. The effect of NbC precipitates on the phase transformation kinetics in high-purity Fe-C-Mn-Nb alloys.

    Dere, EG., Sharma, H., Offerman, SE. & Sietsma, J., 2011, In : Solid State Phenomena. 172-174, p. 499-504 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. 2010
  49. Austenite nucleation and growth observed on the level of individual grains by three-dimensional X-ray diffraction microscopy.

    Savran, VI., Offerman, SE. & Sietsma, J., 2010, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 41A, p. 583-591 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Grain nucleation and growth of individual austenite and ferrite grains studied by 3DXRD microscopy at the ESRF.

    Offerman, SE. & Sharma, H., 2010, In-situ Studies with Photons, Neutrons and Electrons Scattering. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, AJ. (eds.). Berlin: Springer, p. 41-75 35 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. In situ phase transformation studies on a transformation induced plasticity steel under simulated weld thermal cycles using synchrotron diffraction

    Amirthalingam, M., Hermans, MJM., Huizenga, RM., Offerman, SE., Sietsma, J. & Richardson, IM., 2010, In-situ Studies with Photons, Neutrons and Electrons. Kannengiesser, T., Babu, SS., Komizo, Y. & Ramirez, JA. (eds.). Berlin Heidelberg: Springer, p. 133-148 204 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  52. 2009
  53. Multipurpose furnace for in situ studies of polycrystalline materials using synchrotron radiation.

    Sharma, H., Wattjes, AC., Amirthalingam, M., Zuidwijk, T., Geerlofs, N. & Offerman, SE., 2009, In : Review of Scientific Instruments. 80, 12, p. 123301-1-123301-7

    Research output: Contribution to journalArticleScientificpeer-review

  54. Poster: Designing fire resistant steels using synchrotron radiation.

    Sharma, H., Huizenga, RM., Bytchkov, A. & Offerman, SE., 2009.

    Research output: Contribution to conferencePosterProfessional

  55. Poster: Designing fire resistant steels using synchrotron radiation.

    Sharma, H., Huizenga, RM., Bytchkov, A. & Offerman, SE., 2009.

    Research output: Contribution to conferencePosterProfessional

  56. Preventing the collapse of steel-reinforced buildings during fire by increasing the high temperature strength of construction steel.

    Offerman, SE., Sharma, H., Dere, EG. & Huizenga, RM., 2009, Delft, The Netherlands: Delft University of Technology. 33 p.

    Research output: Book/ReportReportProfessional

  57. The effect of aluminium and phosphorus on the stability of individual austenite grains in TRIP steels

    Jimenez-Melero, E., van Dijk, NH., Zhao, L., Sietsma, J., Offerman, SE., Wright, JP. & van der Zwaag, S., 2009, In : Acta Materialia. 57, 5, p. 533-543 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. The effect of grain and phase boundary misorientation on nucleation during solid-state phase transformations in a Co-15Fe alloy.

    Landheer, H., Offerman, SE., Kestens, LAI., Takeuchi, T., Enomoto, M. & Adachi, Y., 2009, Applications of Texture Analysis, Ceramic Transactions, Volume 201. Rollett, AD. (ed.). New Jersey, USA: John Wiley & Sons, p. 305-311 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  59. The role of crystal misorientations during solid-state nucleation of ferrite in austenite.

    Landheer, H., Offerman, SE., Petrov, RH. & Kestens, LAI., 2009, In : Acta Materialia. 57, 5, p. 1486-1496 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. 2008
  61. 3DXRD characterization and modeling of solid-state transformation processes.

    Juul Jensen, D., Offerman, SE. & Sietsma, J., 2008, In : MRS Bulletin. 33, p. 621-629 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 Next

ID: 166142