1. 2002
  2. Study of melting behaviour of aluminium scraps in molten melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Proc. TMS Fall 2002 extraction and processing division meeting on recycling and waste treatment in mineral and metal processing: technical and econmic aspects, Lulea, Sweden. p. 527-537 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  3. Study of melting behaviours of aluminium scraps in molten aluminium and salt melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 31 p.

    Research output: Book/ReportReportProfessional

  4. The distributed nature of material properties and its effect on liquid flow and mass transfer in the blast furnace lower zone

    Post, JR., Husslage, WM., Yang, Y. & Reuter, MA., 2002, Proc. International blast furnace lower zone symposium, Wollongong, Australia. p. 6-1-6-13

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  5. Understanding of hazardous waste incineration through CFD simulation

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2002, Proc. TMS Annual meeting, extraction & processing division; fundamentals of advanced materials for energy conversion, Seattle, Washington, USA. Taylor, PR., Chandra, D. & Bautista, RG. (eds.). p. 409-416 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  6. Understanding of hazardous waste incineration through computational fluid-dynamics simulation

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2002, In : Journal of Environmental Science and Health. Part A: Toxic Hazardous Substances and Environmental Engineering. A37, 4, p. 693-705 13 p.

    Research output: Contribution to journalArticleScientific

  7. 2003
  8. CFD modelling for control of a chemical waste rotary kiln incinerator

    Yang, Y. & Reuter, MA., 2003, In : Control Engineering Practice. 11, 1, p. 93-101 9 p.

    Research output: Contribution to journalArticleScientific

  9. Combustion modelling of a rotary kiln for hazardous waste incineration

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1387-1395 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  10. Combustion modelling of hazardous waste incineration

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. Yazawa internatonal symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, K., Yamauchi, C. & Kongoli, F. (eds.). p. 1053-1067 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  11. Hot metal in the blast furnace hearth: thermal and carbon dissolution effects on buoyancy flow and refractory wear

    Post, JR., Peeters, T., Yang, Y. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries (CFD-2003), Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 433-440 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  12. Modelling of melting behavior of aluminium metal in molten salt and metal bath

    Zhou, B., Yang, Y. & Reuter, MA., 2003, Proc. Yazawa international symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, JK., Yamauchi, C. & Kongoli, F. (eds.). p. 1249-1258 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  13. Modelling of the fuel stream and combustion in a rotary kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries, Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 25-34 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  14. Modelling the inhomogeneous dead man of a blast furnace: the population blance model approach

    Post, JR., Yang, Y. & Reuter, MA., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1396-1405 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  15. Section 40.4 Metallurgical process control

    Reuter, MA. & Yang, Y., 2003, Smithels Metals Reference Book, 8th Edition. Gale, WF. (ed.). p. 1-17

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  16. Thermal effect of the ventilation air to the cooling ring of the rotary kiln waste incinerator

    Pijnenborg, MJA., Yang, Y. & Reuter, MA., 2003, Delft, The Netherlands: Delft Univ. of Technology, Dept. of Applied Earth Sciences. 19 p.

    Research output: Book/ReportReportProfessional

  17. Use of CFD modelling to assist control of a hazadous waste incinerator at AVR-chemie

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. IFAC workshop on new technologies for automation of metallurgical industry, Shanghai, China. Wei Wang (ed.). p. 393-398 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  18. 2004
  19. An overview of the research work in the metallurgy and recycling group at the Delft University of Technology

    Reuter, MA., Boin, UMF. & Yang, Y., 2004, In : World of Metallurgy - Erzmetall. 57, 4, p. 113-124 12 p.

    Research output: Contribution to journalArticleScientific

  20. Analysis of transport process in submerged arc furnace for ferrochrome production

    Yang, Y., Xiao, Y. & Reuter, MA., 2004, Proc. international ferroalloy conference, INFACON X, Cape Town, South Africa. Johannesburg, South Africa: South African Institute of Mining and Metallurgy, p. 15-25 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  21. Combustion modelling of a rotary-kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2004, Proc. 23rd international conference on incineration and thermal treatment technologies - IT3, Phoenix, Arizona, USA. Press, L. & Warren, S. (eds.). Tuscon, Arizona, USA: LOI ZNC, p. 1-18 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  22. Flow behaviour of shredded solid waste in a rotary kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. 3rd international conference on combustion, incineration/pyrolysis and emission control (3rd I-CIPEC), Hangzhou, China. Beijing, China: International Academic Publishers, p. 52-87 36 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  23. Flow simulation of shredded solid waste in rotary-kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. Rewas '04: global symposium on recycling, waste treatment and clean technology, Madrid, Spain. Gaballah, I., Mishra, B., Solozabal, R. & Tanaka, M. (eds.). Warrendale, USA: TMS, INASMET, p. 575-592 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  24. Incineration of hazardous waste in rotary kilns: better understanding through process simulation

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2004, Proc. 2nd international conference on environmental concerns: innovative technologies and management options (ICEC-2004), Xiamen, China. et al Zhang, L. (ed.). Xiamen, China: Xiamen university, p. 1418-1428 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  25. Process modelling of aluminium scrap melting in a molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Tabereaux, AT. (ed.). Warrendale, USA: TMS, p. 919-924 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  26. Section 40.4 Metallurgical process control - Invited book chapter

    Reuter, MA. & Yang, Y., 2004, Smithells etals reference book, 8th edition. Gale, WF. & Totemeier, TC. (eds.). Butterworth Heinemann, p. 16-29

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  27. Simulation of combustion and metal heating in a mobile heat treatment furnace, multiphase phenomena and CFD modelling and simulation of engineering processes

    Yang, Y., de Jong, RA. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Nastac, L. & Li, BQ. (eds.). Warrendale, USA: TMS, p. 429-439 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  28. Simulation of slab movement and transient heating in a continuous steel reheat furnace

    Yang, Y., Kroeze, J. & Reuter, MA., 2004, In : Progress in Computational Fluid Dynamics: an international journal. 4, 1, p. 46-58 13 p.

    Research output: Contribution to journalArticleScientific

  29. The optimization of recycling: integrating the resource, technological and life cycles

    Reuter, MA., Boin, UMF., Rem, PC., Yang, Y., Fraunholcz, N. & van Schaik, A., 2004, In : JOM: Journal of Metals. 56, 8, p. 33-37 5 p.

    Research output: Contribution to journalArticleScientific

  30. 2005
  31. A dynamic CFD hybrid model for submerged arc furnace control

    Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. computational modelling in mineral processing 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  32. A dynamic CFD hybrid model of a submerged arc furnace for phosphorus production

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2005, In : Minerals Engineering. 19, 3, p. 309-317 9 p.

    Research output: Contribution to journalArticleScientific

  33. A dynamic CFD hybrid model of a submerged arc furnace for phosphorus production

    Adema, AT., Scheepers, E., Yang, Y. & Reuter, MA., 2005, Proc. 2005 fluent Benelux user group meeting, Limelette, Belgium. s.n. (ed.). Wavre, Belgium: Fluent Ltd., p. 3c-1-3c-12

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  34. A dynamic CFD model for submerged arc furnace control

    Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-11 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  35. Aluminium recycling scrap melting and process simulation

    Yang, Y., Xiao, Y., Zhou, B. & Reuter, MA., 2005, Proc. John Floyd international symposium: sustainable deveopments in metalsprocessing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 251-264 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  36. CFD based process modelling of a rotary furnace for auminium scrap melting

    Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2005, Proc. 4th international conference computational fluid dynamicsin the oil and gas, metallurgical & process industries. Page, I. & Johansen, ST. (eds.). Trondheim, Norway: SINTEF, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  37. Eaching metallurgy and recycling in an international MSc proram in the context of metal and materials ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A. & Yang, Y., 2005, Proc. EMC2005: European metallurgical conference, Dresden, Germany. s.n. (ed.). Germany: GDMB, p. 351-367 17 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  38. Hot metal flow in the hearth of a blast furnace: influence of dynamic changes dead man porosity due to coke dissolution and coke size changes

    Post, JR., Tognarelli, D., van der Stel, J., Yang, Y. & Reuter, MA., 2005, Proc. 5th European coke and ironmaking congress - 5th ECIC, Stockholm. Jernkontoret (ed.). Stockholm: Swedish Steel producers' Association, p. 1-16 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  39. Metal and material ecology 'evolving industry threats into competitive edge'

    Reuter, MA., van Schaik, A. & Yang, Y., 2005, Sustainable developments in metal processing. Nilmani, M. & Rankin, WJ. (eds.). Melbourne: NCS associates, p. 31-45 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  40. Metal and material ecology evolving industry threats into competitive edge

    Reuter, MA., van Schaik, A. & Yang, Y., 2005, Proc. John Floyd international symposium: sustainable developments in metals processing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 31-46 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  41. Modelling the combustion behaviour of the hazardous waste in a rotary-kiln incinerator.

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2005, In : Journal of Environmental Science and Health. Part A: Toxic Hazardous Substances and Environmental Engineering. 40, 10, p. 1823-1842 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Process metallurgical research activities at Delft University of Technology, Netherlands, Part I: Ferrous metallurgy

    Boom, R., Yang, Y. & Xiao, Y., 2005, In : Berg- und Huttenmannische Monatshefte. 150, 11, p. 390-394 5 p.

    Research output: Contribution to journalArticleScientific

  43. Process metallurgical research activities at Delft University of Technology, Netherlands. Part I: Ferrous Metallurgy.

    Boom, R., Yang, Y. & Xiao, Y., 2005, In : Berg- und Huttenmannische Monatshefte. 150, 11, p. 390-394 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Process modelling of aluminium scraps melting in molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2005, Proc. Pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Mineral Engineering Internatonal, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  45. Teaching metallurgy and recycling in an international MSc program in the context of metal and material ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A. & Yang, Y., 2005, Proceedings of EMC 2005. S.n. (ed.). Clausthal-Zellerfeld: GDMB Informationsgesellschaft, p. 351-367 17 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  46. Terahertz heterodyne receiver based on a quantum cascade laser and a superconducting bolometer

    Gao, JR., Hovenier, JN., Yang, Y., Baselmans, JJA., Baryshev, AM., Hajenius, M., Klapwijk, TM., Adam, AJL., Klaassen, TO., Williams, BS., Kumar, S., Hu, Q. & Reno, JL., 2005, In : Applied Physics Letters. 86, 24, p. 244104-1-244104-3

    Research output: Contribution to journalArticleScientificpeer-review

  47. The metrics of material and metal ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A., Verhoef, EV., Yang, Y. & Georgalli, GA., 2005, Elsevier. 720 p.

    Research output: Book/ReportBookScientific

  48. The metrics of material and metal ecology - Harmonizing the resource, technology and environmental cycles

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A., Verhoef, E., Yang, Y. & Georgalli, GA., 2005, Amsterdam: Elsevier. 706 p.

    Research output: Book/ReportBookScientificpeer-review

  49. Use of CFD to predict the performance of a heat treatment furnace

    Yang, Y., de Jong, RA. & Reuter, MA., 2005, Proc. CFD 2005 - 4th international conference computational fluid dynamics in the oil and gas, metallurgical & process industries. Page, I. & Johansen, ST. (eds.). Trondheim, Norway: SINTEF, p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  50. 2006
  51. A CFD model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Adema, AT., Yang, Y., Boom, R. & Reuter, MA., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: Springer, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  52. A dynamic-CFD hybrid model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2006, In : Minerals Engineering. 19, 3, p. 309-317 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Analysis of uranium-bearing Fe-phosphide from a submerged arc furnace for phosphorus production

    Voncken, JHL., Scheepers, E. & Yang, Y., 2006, In : Mineralogy and Petrology. 88, 3-4, p. 407-418 12 p.

    Research output: Contribution to journalArticleScientific

  54. CFD simulations of pyrometallurgical processes.

    Yang, Y., Zhou, B., Post, JR., Scheepers, E., Reuter, MA. & Boom, R., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: Springer, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  55. Changes in deadman porosity due to coke dissolution and coke size changes, its influence on hot metal flow.

    Post, JR., Yang, Y., Reuter, MA. & van Stel, J., 2006, Proceedings of the 4th International Congress on the Science and Technology of Ironmaking (ICSTI '06). s.n. (ed.). Osaka, Japan: Iron and Steel Institute of Japan, p. 568-572 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

ID: 108812