1. 2004
  2. Flow behaviour of shredded solid waste in a rotary kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. 3rd international conference on combustion, incineration/pyrolysis and emission control (3rd I-CIPEC), Hangzhou, China. Beijing, China: International Academic Publishers, p. 52-87 36 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Flow simulation of shredded solid waste in rotary-kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. Rewas '04: global symposium on recycling, waste treatment and clean technology, Madrid, Spain. Gaballah, I., Mishra, B., Solozabal, R. & Tanaka, M. (eds.). Warrendale, USA: TMS, INASMET, p. 575-592 18 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Incineration of hazardous waste in rotary kilns: better understanding through process simulation

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2004, Proc. 2nd international conference on environmental concerns: innovative technologies and management options (ICEC-2004), Xiamen, China. et al Zhang, L. (ed.). Xiamen, China: Xiamen university, p. 1418-1428 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Process modelling of aluminium scrap melting in a molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Tabereaux, AT. (ed.). Warrendale, USA: TMS, p. 919-924 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Section 40.4 Metallurgical process control - Invited book chapter

    Reuter, MA. & Yang, Y., 2004, Smithells etals reference book, 8th edition. Gale, WF. & Totemeier, TC. (eds.). Butterworth Heinemann, p. 16-29

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  7. Simulation of combustion and metal heating in a mobile heat treatment furnace, multiphase phenomena and CFD modelling and simulation of engineering processes

    Yang, Y., de Jong, RA. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Nastac, L. & Li, BQ. (eds.). Warrendale, USA: TMS, p. 429-439 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Simulation of slab movement and transient heating in a continuous steel reheat furnace

    Yang, Y., Kroeze, J. & Reuter, MA., 2004, In : Progress in Computational Fluid Dynamics: an international journal. 4, 1, p. 46-58 13 p.

    Research output: Contribution to journalArticleScientific

  9. The optimization of recycling: integrating the resource, technological and life cycles

    Reuter, MA., Boin, UMF., Rem, PC., Yang, Y., Fraunholcz, N. & van Schaik, A., 2004, In : JOM: Journal of Metals. 56, 8, p. 33-37 5 p.

    Research output: Contribution to journalArticleScientific

  10. 2003
  11. CFD modelling for control of a chemical waste rotary kiln incinerator

    Yang, Y. & Reuter, MA., 2003, In : Control Engineering Practice. 11, 1, p. 93-101 9 p.

    Research output: Contribution to journalArticleScientific

  12. Combustion modelling of a rotary kiln for hazardous waste incineration

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1387-1395 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Combustion modelling of hazardous waste incineration

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. Yazawa internatonal symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, K., Yamauchi, C. & Kongoli, F. (eds.). p. 1053-1067 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  14. Hot metal in the blast furnace hearth: thermal and carbon dissolution effects on buoyancy flow and refractory wear

    Post, JR., Peeters, T., Yang, Y. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries (CFD-2003), Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 433-440 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Modelling of melting behavior of aluminium metal in molten salt and metal bath

    Zhou, B., Yang, Y. & Reuter, MA., 2003, Proc. Yazawa international symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, JK., Yamauchi, C. & Kongoli, F. (eds.). p. 1249-1258 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Modelling of the fuel stream and combustion in a rotary kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries, Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 25-34 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Modelling the inhomogeneous dead man of a blast furnace: the population blance model approach

    Post, JR., Yang, Y. & Reuter, MA., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1396-1405 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Section 40.4 Metallurgical process control

    Reuter, MA. & Yang, Y., 2003, Smithels Metals Reference Book, 8th Edition. Gale, WF. (ed.). p. 1-17

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  19. Thermal effect of the ventilation air to the cooling ring of the rotary kiln waste incinerator

    Pijnenborg, MJA., Yang, Y. & Reuter, MA., 2003, Delft, The Netherlands: Delft Univ. of Technology, Dept. of Applied Earth Sciences. 19 p.

    Research output: Book/ReportReportProfessional

  20. Use of CFD modelling to assist control of a hazadous waste incinerator at AVR-chemie

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. IFAC workshop on new technologies for automation of metallurgical industry, Shanghai, China. Wei Wang (ed.). p. 393-398 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. 2002
  22. Combustion modelling at the rotary kiln waste incinerator at AVR-chemie. Progress report 2002

    Yang, Y., Pijnenburg, M. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 26 p.

    Research output: Book/ReportReportProfessional

  23. Comprehensive processing of low grade sulphidic molybdenum concentrates

    Yang, Y., van den Berg, JAM., Nauta, HHK., van Sandwijk, A. & Reuter, MA., 2002, Proc. bio- and hydrometallurgy '02: the 1st international symposium on bio- and hydrometallurgy, Cape Town, South Africa. p. 1-3 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Comprehensive processing of low grade sulphidic molybdenum ores

    van den Berg, JAM., Yang, Y., Nauta, HHK., van Sandwijk, A. & Reuter, MA., 2002, In : Minerals Engineering. 15, 11, p. 879-883 5 p.

    Research output: Contribution to journalArticleScientific

  25. Progress report 2002: modelling and optimisation of pyrometallurgical batch reactors

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  26. Reaction kinetics and process simulation in submerged arc furnace for FeCr production

    Xiao, Y., Yang, Y. & Reuter, MA., 2002, Proc. 1st international symposium on pyrometallurgy, Cape Town, South Africa. p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Study of melting behaviour of aluminium scraps in molten melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Proc. TMS Fall 2002 extraction and processing division meeting on recycling and waste treatment in mineral and metal processing: technical and econmic aspects, Lulea, Sweden. p. 527-537 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Study of melting behaviours of aluminium scraps in molten aluminium and salt melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 31 p.

    Research output: Book/ReportReportProfessional

  29. The distributed nature of material properties and its effect on liquid flow and mass transfer in the blast furnace lower zone

    Post, JR., Husslage, WM., Yang, Y. & Reuter, MA., 2002, Proc. International blast furnace lower zone symposium, Wollongong, Australia. p. 6-1-6-13

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Understanding of hazardous waste incineration through CFD simulation

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2002, Proc. TMS Annual meeting, extraction & processing division; fundamentals of advanced materials for energy conversion, Seattle, Washington, USA. Taylor, PR., Chandra, D. & Bautista, RG. (eds.). p. 409-416 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Understanding of hazardous waste incineration through computational fluid-dynamics simulation

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2002, In : Journal of Environmental Science and Health. Part A: Toxic Hazardous Substances and Environmental Engineering. A37, 4, p. 693-705 13 p.

    Research output: Contribution to journalArticleScientific

  32. 2001
  33. Automatische bepaling van inhoud en verbrandingswaarde van vaten chemisch afval met röntgentechnologie

    de Jong, TPR., Yang, Y. & Voncken, JHL., 2001, Delft, The Netherlands: Delft University of Technology. 14 p.

    Research output: Book/ReportReportProfessional

  34. Automatische bepaling van inhoud en verbrandingswaarden van vaten chemisch afval met röntgentechnologie

    de Jong, TPR., Yang, Y. & Voncken, JHL., 2001, Delft, The Netherlands: Delft University of Technology. 14 p.

    Research output: Book/ReportReportProfessional

  35. Better understanding and strategic control od hazardous waste incineration at AVR-Chemie

    Yang, Y., Reuter, MA. & Voncken, JHL., 2001, Proc. International Conference on Environmental Concerns and Emerging Abatement Technologies (ECAT). et al Wang, Z. (ed.). Beijing, China, p. 35-1-35-4

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Better understanding and strategic control of hazardous waste incineration at AVR-Chemie

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2001, Proc. ECAT International Conferenceon Environmental Concerns and Emerging Abatement Technologies. Beijing, China, p. 35-1-35-4

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. CFD Modelling for control of a chemcial waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, Proceedings of the 10th IFAC Symposium on automation in Mining, Mineral, and Metal Processing. sn (ed.). Grevenbroich, Germany: s.n., p. 393-398 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. CFD modelling for control of a chemical waste rotary kiln incinerator

    Yang, Y. & Reuter, MA., 2001, Proc. 10th IFAC Symposium on Automation in Mining, Mineral and Metal Processing (MMM 2001). Mituhiko, Araki, p. 393-398 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. CFD simulation of residence time distribution of a rotary kiln waste incinerator

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 1, 14, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  40. CFD simulation of residence time distribution of a rotary kiln waste incinerator.

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  41. Combustion modelling of a rotary kiln waste incinerator with PHOENICS

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 1, 14, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  42. Combustion modelling of a rotary kiln waste incinerator with PHOENICS.

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  43. Comprehensive processing of low grade molybdenum sulphide concentrates. Phase III: Cementation of Cu and precipitation of Mo from the leach filtrate

    van den Berg, JAM., Yang, Y., van Sandwijk, A. & Reuter, MA., 2001, Delft, The Netherlands: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  44. Comprehensive processing of low grade molybdenum sulphide concentrates. Phase IIIa: Cementation of Cu and precipitation of Mo from the leach filtrate and removal of sulfate from the dissolver liquid

    van den Berg, JAM., Yang, Y., van Sandwijk, A. & Reuter, MA., 2001, Delft, The Netherlands: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  45. Comprehensive processing of low grade molybdenum sulphide concentrates; Phase III :Cementation of Cu and precipitation of Mo from the leach filtrate

    van den Berg, JAM., Yang, Y., van Sandwijk, A. & Reuter, MA., 2001, Delft: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  46. Comprehensive processing of low grade molybdenum sulphide concentrates; Phase IIIa: Cementation of CU and precipitation of Mo fro the leach filtrate and removal of sulfate from the dissolver loquid

    van den Berg, JAM., Yang, Y., van Sandwijk, A. & Reuter, MA., 2001, Delft: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  47. Corus RD&T: Melt flow in the coke bed in the hearth of a blast furnace

    Post, JR., Reuter, MA. & Yang, Y., 2001, p. 82-82. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  48. Hartman : CFD simulation of residence time distribution of a rotary kiln waste inconerator.

    Yang, Y. & Reuter, MA., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  49. Hartman ; Combustion modelling of a rotary kiln waste incinerator with PHOENICS.

    Yang, Y. & Reuter, MA., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  50. Imaging spectrometry and geological applications

    van der Meer, FD., Yang, Y. & Lang, H., 2001, Dordrecht: Kluwer Academic Publishers. 18 p.

    Research output: Book/ReportBookScientific

  51. Modelling and control of resource cycle

    Reuter, MA. & Yang, Y., 2001, Delft: CITG Section Processing of Primary Raw Materials. 301 p.

    Research output: Book/ReportReportProfessional

  52. Modelling and optimisation of a secondary aluminium melting furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2001, Proc. EMC 2001. Friedrichshafen, Germany, p. 84-84 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Modelling and optimisation of a secondary aluminium melting furnace.

    Zhou, B., Yang, Y. & Reuter, MA., 2001.

    Research output: Contribution to conferencePosterProfessional

  54. Modelling and optimisation of a secondary aluminium melting surface

    Zhou, B., Yang, Y. & Reuter, MA., 2001, p. 84-84. 1 p.

    Research output: Contribution to conferenceAbstractScientific

ID: 108812